Technical Application Guide for UP SHINE LED T8 Batten UP-AL06-9W-BO-M

Transcription

1 Technical Application Guide for UP SHINE LED T8 Batten UP-AL6-9W-BO-M

2 Introduction T8 diffused batten suitable for ceiling, wall or pendant mounting. Prismatic diffuser for visual comfort. Cover plate held securely by threaded nut for fast installation. High quality white epoxy powder coated finish. Large terminal block for ease in installation. New plastic snapon end caps for easy installation of diffuser. Emergency&sensor multi-function provided for wide choice. Up to 7% energy saving compared to standard CFL Long lifetime of 4, hours 12 wide beam angle CCT: 3K 4K 5K 57K No UV/IR light Environment friendly, without Mercury or any other hazardous substances Application notes IP2 for indoor use only Professional electrician for installation only Switch off before installation Do not touch when in use Keep away from hot steam and corrosive gas Application Areas All commercial, industrial and domestic applications Certificate

3 Sensor Setting Antenna Module Detection range setting Hold time setting Daylight sensor setting Daylight sensor probe L N N L Installation hole UC1 Operating voltage 22~24Vac, 5Hz Rated load 4W(inductive), 8W(resistive) HF system 5.8GHz±75MHz, ISM wave band Transmitting power <.2mW Power consumption.5w(standby) Detection zone Max.(D H): 1m 6m Detection sensitivity 1% / 5% / 75% / 1% Hold time 5s / 9s / 5min / 15min Daylight sensor 2lux / 1lux / 5lux / Disable Mounting height 6m Max. Motion detedtion.5~3m/s Detection angle 3-15 Operating temperature -2 ~6 IP rating IP2 By selecting the combination on the DIP switch, sensor data can be precisely set for each specific application % 75% 5% 1% Detection area Detection area can be set by selecting the combination on the switches to fit precisely each application s 9s 5min 15min Disable 5Lux 1Lux 2Lux Hold time Refers to the time period the lamp remains at 1% illumination after no motion detected. 5S for testing purpose only please do not choose 5S for daily use. Daylight sensor The sensor can be set to only allow the lamp to illuminate below a defined ambient brightness threshold. When set to Disable mode, the daylight sensor will switch on the lamp when motion is detected regardless of ambient light level. 5lux: twilight operation, 1lux, 2lux: darkness operation only. Detection Pattern Ceiling Mounting pattern (Unit: m) Wall Mounting pattern (Unit: m) ceiling mounting height(m) wall mounting height(m) High detection area Low detection area High detection area Low detection area

4 Product Information Technical Specifications Model Voltage Power Power Factor Lumen (±5%) Beam angle CCT Lifespan CRI Dimmable Dimension UP-AL6-9W-BO-M AC23V 9W o 3K 4h 8 No 624*12*18mm UP-AL6-9W-BO-M AC23V 9W o 4K 4h 8 No 624*12*18mm UP-AL6-9W-BO-M AC23V 9W o 5K 4h 8 No 624*12*18mm UP-AL6-9W-BO-M AC23V 9W o 57K 4h 8 No 624*12*18mm Driver data Sheet Driver data Emergency Main Power Input rated Voltage AC23V AC23V Frequency 5Hz 5Hz Input Voltage AC22-24V AC22-24V Efficiency 8% 86% Total load Wattage 3-4W 9W±1W Power Factor.9 Rated input current.4a.5a Full load output Voltage DC24-38V 6-75V Rated output current 1-17mA 11mA Output current range 11mA±5% Power tolerance 3-4W±.5W ±5% Current output tolerance ±5% Battery 7.2V 22mAh Lifetime 3hrs Battery duration 3hrs Charge time 24hrs Emergency switching time 1S Short circuit protection PASS Over voltage protection PASS Over temperature protection PASS PASS Withstand voltage AC15V AC15V Fixture Compatibility Rated Wattage Electrical Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 9W Ⅰ IP2-2 o C~45 o C ~9% -2 o C~65 o C

5 Spectral Distribution 3K 4K Max=1413 [1.=2] 3.5SDCM F3K.8 Max=8231 [1.=2] SDCM F4K Spectrum x=.4464 y=.449 Spectrum x=.3841 y= Wavelength(nm) Wavelength(nm) 5K 57K.8 Max=8735 [1.=2] 2.23SDCM F5K.8 Max=787 [1.=2] 4.91SDCM F57K Spectrum x=.3496 y=.366 Spectrum x=.3473 y= Wavelength(nm) Wavelength(nm) Photometric Diagram 3K 4K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram / E(LX) Planar Illuminance Curve MH=1m C/18 C9/27 Flux out: lm 3.281ft 1.85, 21.79fc 1m 116.8, 234.6lx 6.562ft 2.713, 5.448fc 2m 29.2, 58.64lx 6.21ft cm 12.4ft 367.6cm / E(LX) Planar Illuminance Curve MH=1m C/18 C9/27 Flux out: lm 3.281ft 9.16, 2.62fc 1m 98.59, 222.lx 6.562ft 2.29, 5.155fc 2m 24.65, 55.49lx 6.91ft 21.34cm 13.8ft 42.69cm ft 3m 1.26, 2.421fc 12.98, 26.6lx 18.6ft 55.59cm ft 3m 1.18, 2.291fc 1.95, 24.66lx 2.7ft 631.3cm ft.6781, 1.362fc 4m 7.299, 14.66lx 24.9ft cm ft.5725, 1.289fc 4m 6.162, 13.87lx 27.6ft cm AVERAGE BEAM ANGLE(5%): DEG Distance(m) 16.4ft.434,.8717fc 3.11ft 5m 4.672, 9.383lx cm Height Eavg, Emax Angle: 115.8deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance AVERAGE BEAM ANGLE(5%): DEG Distance(m) 16.4ft.3664,.8249fc 34.51ft 5m 3.944, 8.879lx cm Height Eavg, Emax Angle: deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance. 5K 57K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram / E(LX) Planar Illuminance Curve MH=1m C/18 C9/27 Flux out: lm 3.281ft 9.782, 24.1fc 1m 15.3, 258.5lx 6.562ft 2.446, 6.3fc 2m 26.32, 64.62lx 7.318ft 223.5cm 14.64ft 446.9cm / E(LX) Planar Illuminance Curve MH=1m C/18 C9/27 Flux out: lm 3.281ft 9.361, 22.75fc 1m 1.8, 244.9lx 6.562ft 2.34, 5.687fc 2m 25.19, 61.22lx 7.35ft cm 14.61ft cm ft 3m 1.87, 2.668fc 11.7, 28.72lx 21.95ft cm ft 3m 1.4, 2.528fc 11.2, 27.21lx 21.91ft cm ft.6114, 1.51fc 4m 6.581, 16.16lx 29.27ft cm ft.585., 1.422fc 4m 6.297, 15.3lx 29.22ft 89.62cm AVERAGE BEAM ANGLE(5%): DEG Distance(m) 16.4ft.3913,.965fc 36.59ft 5m 4.212, 1.34lx cm Height Eavg, Emax Angle: deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance AVERAGE BEAM ANGLE(5%): DEG Distance(m) 16.4ft.3744,.91fc 36.52ft 5m 4.3, 9.795lx cm Height Eavg, Emax Angle: deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

6 Polar Diagram Comparison -15 O 18 O 15 O -12 O 12 O -9 O 9 O O 15 6 O 2-3 O 25 3 O O AVERAGE BEAM ANGLE (5%): 117.5DEG C/18, deg C3/21, deg C6/24, deg C9/27, deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 9 Temperature ( o C) :13:13 11:31:1 11:49:1 12:7:1 12:25:1 12:43:1 13:1:1 13:19:1 13:37:1 Time 13:55:1 14:13:1 14:31:1 14:49:1 15:7:1 15:43:1 16:1:1 16:19:1 16:37:1 IC Capacitor MOS PCB LED Fitting Environmental temperature The driver lifespan is based on capacitor working temperature.

7 Installation Step 1 Fix the ceiling acessories on the ceiling. Step 2 Fix the locking device on the fixture. Step 3 Connect the output wire and fix the support frame on the fixture. Step 4 Slip the lampshade into the slot and close the other side. Step 5 Press the locking device and insert the wire rope into the locking device. Step 6 The installation is finished.

8 Installation Step 1 Connect the input wire, and fix the fixture in the ceiling or wall. Step 2 Connect the output wire and fix the support frame on the fixture. Step 3 Slip the lampshade into the slot and close the other side. Step 4 The installation is finished. Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 65*27.5* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China