Technical Application Guide for UP-SHINE LED Downlight UP-DL98A-8-25W-C3/UP-DL98B-8-25W-C3 UP-DL98A-8-25W-P3/UP-DL98B-8-25W-P3

Transcription

1 Technical Application Guide for UP-SHINE LED Downlight UP-DL98A-8-25W-C3/UP-DL98B-8-25W-C3 UP-DL98A-8-25W-P3/UP-DL98B-8-25W-P3

2 Introduction A B DL98 model is an integrated downlight provides the perfect combination of efficiency, light comfort and design, without compromising on lighting performance (color rendering and color uniformity). It offers a wide choice of options for creating the desired ambience. Features 1. Integrated SMD LED down lights with Faceted / Specula Reflector. 2. No external driver required which facilitates easy installation. 3. A perfect alternative to traditional ceiling mounted luminaries. 4. Looping from luminaries to luminaries with mains through-wiring. 5. IP54 protection at room side, suitable for bathrooms, kitchens. 6. CCT can be switched through the slide button on the back of the lamp. 7. Triac Dimmable version available. 8. Good heat dissipating to ensure long life. 9. Internal Driver Application notes IP54 for indoor use only The lamp must be installed by professional electrician Ensure the power supply is switched off before fitting this product Do not touch the lamp when in use Keep away from hot steam and corrosive gas Application Areas It is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc. Certificate

3 Product Information Ø Ø228 Ø193 Technical Specifications Model Voltage Power Power Factor UP-DL98A-8-25W-C3 UP-DL98B-8-25W-C3 UP-DL98A-8-25W-P3 UP-DL98B-8-25W-P3 Fixture Compatibility Rated Wattage Electrical Classification Beam angle AC1-277V 25W.9 9 No AC2-24V 25W.9 9 Yes UP-DL98B-8-25W-C3 AC1-277V 25W.9 6 No UP-DL98B-8-25W-P3 Driver data Sheet AC2-24V 25W.9 6 Yes Ingress Protection Dimmable Lumen (±5%) 228 3K 265 4K K 218 3K 253 4K K 228 3K 265 4K 24 57K 225 3K 258 4K K Operating Temp CCT UGR Lifespan CRI Dimension 5,h 8 5,h ,h ,h 8 Driver data Dim Non dim Input rated Voltage AC23V AC1-277V Frequency 5Hz 5/6Hz Input Voltage AC2-24V AC9-35V Efficiency 83% 87% Total load Wattage 25W±5% 25W±5% Power Factor.9.9 Rated input current.14a.28a Full load output Voltage DC65-75V DC65-75V Rated output current 3mA 34mA Output current range 3mA±5% 34mA±5% Power tolerance ±5% ±5% Current output tolerance ±5% ±5% Dimming range 8%-1% Dimmer Triac dimmers Short circuit protection PASS PASS Over voltage protection PASS PASS Over temperature protection PASS PASS THD 23V 23V Withstand voltage Operating Humidity cutout 2-21mm cutout 2-21mm cutout 2-21mm cutout 2-21mm Storage Temp 25W Ⅱ IP54-2 o C~45 o C ~9% -2 o C~65 o C

4 Spectral Distribution 3K 4K.8 Max=811 [1.=2] 2.39 SDCM F3K.8 Max=8914 [1.=2] 2.58 SDCM F4K Spectrum x=.4447 y=.456 Spectrum x=.3787 y= Wavelength(nm) Wavelength(nm) 57K Max=11468 [1.=2] 5.82 SDCM F57K Spectrum x=.3328 y= Wavelength(nm) Photometric Diagram 3K 4K Polar intensity diagram Cartesian intensity diagram Beam diagram Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: 1652 lm Flux out: 1858 lm / E(LX) Planar Illuminance Curve MH=1m C/18 C9/ / E(LX) Planar Illuminance Curve MH=1m C/18 C9/ AVERAGE BEAM ANGLE(5%): 85.8 DEG Distance(m) Height Eavg, Emax Angle: 85.2deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance. AVERAGE BEAM ANGLE(5%): 86.4 DEG Distance(m) Height Eavg, Emax Angle: 85.76deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance. 57K Polar intensity diagram Cartesian intensity diagram Beam diagram Flux out: 1762 lm -/+18 Planar Illuminance Curve E(LX) MH=1m C/18 C9/ AVERAGE BEAM ANGLE(5%): 86.8 DEG Distance(m) Height Eavg, Emax Angle: 85.99deg Diameter Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

5 Polar Diagram Comparison -15 O -/+18 O 15 O -12 O 12 O -9 O 9 O -6 O O -3 O 3 O O AVERAGE BEAM ANGLE (5%): 86.8DEG C/18, 87.1 deg C3/21, 86.8 deg C6/24, 86.7 deg C9/27, 86.7 deg Driver lifetime & LED light decay rate Driver Lifetime LED Light Decay Rate 9 11%.4 Lifetime (hours) o C 75 o C 85 o C 95 o C 15 o C Capacitor Tc ( o C) % Luminous Flux 15% 1% 95% 9% 85% % 75% FLUX.1.5 U'V' 7% LifeTime (hours) Temperature The testing is operated at 25 C The lifetime of capacitor, minimum of 5, hours if operated at 15 C, will be doubled whenever the temperature drops 1 C The highest withstand temperature of IC, MOS could be 12 C The highest withstand temperature of LED junction temperature is 15 C 8 Temperature ( o C) :37:46 19:7:44 19:37:44 2:7:44 2:37:44 21:7:44 21:37:44 22:7:44 23:7:44 23:37:44 :7:44 :37:44 1:7:44 1:37:44 2:7:44 2:37:44 3:7:44 3:37:44 4:7:44 4:37:44 5:7:44 5:37:44 6:7:44 6:37:44 7:7:44 7:37:44 8:7:44 8:37:44 9:7:44 Time The driver lifespan is based on capacitor working temperature. IC Capacitor MOS PCB LED Fitting Environmental temperature

6 Installation Install requirements A-gap above the fitting B-gap to the building material C-gap to the thermal insulation Figure 1 Figure 2 WW NW CW 1. Open a hole according to the cutout size of led downlight. 2. Open the line pressing cover, see Figure 1. (Model dependent): Choose the CCT by slide switch, see Figure 2. L = Brown N = Blue 3. Put the main AC wire through line pressing clip, feed the L.N to the fast connection terminal block respectively then compress the line pressing clip. 4. Close the line pressing cover tightly. 5. Hold back spring clips then push downlight into the hole. 6. Make sure the downlight fixed tightly in ceiling, turn on the power. Packaging Information SIZE(CM) N.W/pc (KGS) G.W.(KGS) Q'TY(PCS) Carton 52*52* '' standard container 4'' standard container CTNS Q'TY(PCS) VOLUME(CBM) Phone: Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China