Product information Electronic devices. Typ: CONV BOX 1-5. Converter for Pt-sensor as KTY-alternative. Pt/KTY-Converter
|
|
|
- Annabel Chapman
- 6 years ago
- Views:
Transcription
1 Product information Pt/KTY-Converter - Basic information The converter evaluates the resistance of a Pt sensor and provides the corresponding resistance of a KTY sensor. It can replace for the discontinued KTY84 sensor in all electrical equipment. - Application Connecting motors and generators with Pt sensors to control units expecting KTY sensors at the input - General function The converter evaluates the resistance of a Pt sensor and provides the corresponding resistance of a KTY sensor. There is no necessity to replace a full functional inverter or other control unit when a device with Pt output has to be connected. Newer Spare parts without KTY Sensors can easily connected to older control units. - Advantage No need to change a control unit when replacing a motor. Connecting devices with different sensors to one control unit is possible. Spare parts with Pt-sensors can be used in older systems. Independence from KTY availability 1-5
2 Comparison between Pt1000, KTY and Pt1000-converter - Comparison between Pt1000, KTY and Pt1000-converter PT1000 class B (blue) KTY84-130, values (red) from the original NXP datasheet, including the tolerance (red dots) Pt1000-converter (green) output Comparison between KTY and Pt1000-Converter (1 C steps) - Comparison between KTY and Pt1000- Converter Detailed view of Pt1000-converter signal, and the curve of the KTY sensor. The ripple of the Pt1000-converter signal (green) is caused by the resolution of the internal digital potentiometer. 2-5
3 Electrical data: Input: Output : Power supply: 1 sensor Pt100 or Pt1000 KTY84-xx 24: 22 Vdc 26 Vdc (with galvanic isolation) Power consumption: < 1VA Ambient temperature: C Storage temperature: -40 C C Temperature measurement range: 0 C C Mechanical data: Housing: Metal RAL 7035 Material: Aluminium Dimension: length x width x height 100mm x 130mm x 91mm Mounting: 4xM5 Protection class: IP 68 Input: M23 17 pin female jack Sensor IN: typ. Measurement current: Sensor OUT: max. current : 10mA Pin 8 (+) und Pin 9 (-) <1mA Output: M23 17 pin male jack RDT input and output of the converter on pin 8 and 9. All other contacts looped trough Power supply: M12 5 pin jack Pin 1 + (brown) Pin 3 - (blue) Order code: page 5 3-5
4 Product information -Dimension Mounting with 4 screws max. M
5 -Order code Name Voltage Sensor IN Sensor OUT Dimension Part number CONV-BOX-Pt100 24V DC Pt100 KTY mm*100mm*91mm CONV-BOX-Pt V DC Pt1000 KTY mm*100mm*91mm Other KTY sensors on demand. Responsibility: The statements concerning our products are based upon our current technical knowledge and application technological experience. Liability shall be accepted in the context of the individual contract according to our deliveryand sales conditions. The user is not released to check our information and recommendations before using the product. In the course of our product development, we reserve the right to make technical changes. For further information and advice please contact: 5-5
1-7. Product information Temperature Monitoring. Type: TMS U. Thermal control module:
- Basic information The electronic module protects, in combination with temperature sensors, the winding from electrical machines (motors, generators, transformers ) and liquid or gaseous media. Used properly,
Valve Island with Electronic I/O
Screw in Temperature /Switch with display for ON/OFF Control Indication, monitoring, transmission and ON/OFF control in one device Extra large display Menu guided parametrisation Complete communication
minimal installation depth: 57 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 57 mm without plug-in terminal adjustment via factory default or directly
Inductive Linear Position Sensor LI800P0-Q25LM0-LIU5X3-H1151
Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interference Extremely short blind zones Resolution, 12-bit 4-wire, 15 30 VDC Analog
minimal installation depth: 25 mm without plug-in terminal min-/max-value recording display flashing at threshold exceedance / undershooting
Digital panel meter 4-digit M1 red display of -1999 9999 digits (optional green, orange or blue display) minimal installation depth: 25 mm without plug-in terminal adjustment via factory default or directly
ZM18 Series DATASHEET SENSORPARTNERS.COM. Sensor Partners BVBA Z.1 Researchpark 310 B-1731, Zellik Belgium
ZM18 Series DATASHEET Sensor Partners BV James Wattlaan 15 5151 DP Drunen The Netherlands +31 (0)416-37 82 39 info@sensorpartners.com sensorpartners.com Sensor Partners BVBA Z.1 Researchpark 310 B-1731,
Temperature Transmitters - Head Mounted
XTH Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
Input Load (ma) Typ.
1. Features Wide 4 : 1 Input Range Low Ripple And Noise Input / Output Isolation 1.5K Vdc Or K Vdc 100% Burn-In Input - Filter Custom Design Available Net Weight: 12 g / g Typical RoHS Converter Certified
CTP16-Rotate. KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP16-Rotate 16 channel telemetry
Assembly. Front view. Parametrization interface. Power Bus
Temperature Converter Features Assembly 1-channel signal conditioner 24 V DC supply Thermocouple, RTD, potentiometer or mv input Input for PTC thermistor Current and voltage output Line fault (LFD) and
APTHPA xx50
Absolute Maximum Ratings PARAMETER UNIT RATING Input RF Power dbm 0 Supply Voltage V 35 Load Mismatch Value - 3 : 1 @all load phase * Input Signal Condition : CW 1-Tone Environmental Characteristics PARAMETER
Positioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP
Features Positioning drive with worm gear bevel geared shaft Profibus-DP Brushless DC motor Absolute multiturn position detection Nominal power output 80 W inputs programmable Separate communication and
Correction Reissue. Product Discontinuation Notices
PRODUCT NEWS Correction Reissue Product Discontinuation Notices January 6, 2014 Pressure Sensors No. 2011265E(2) Discontinuation Notice of Pressure Sensor (Stainless diaphragm) E8AA series (Special product),
Switching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
DR-DG-10-HO. 10 Gbps High Output Voltage Driver Module. Digital Driver. Features. Performance Highlights. Applications Gbps Output Response
The DR-DG-10-HO is a driver module optimized for digital applications requiring an upper operation voltage at 10 Gbps - 12.5 Gbps. It exhibits 12.5 V pp output volatge and 35 db gain up to 7 GHz. The DR-DG-10-HO
Universal process controller econtrol
8 Universal process controller Type 8 can be combined with... Continuous, point, point and On/Off control Ratio control function Sensor inputs (,, frequency, RTD) Control of proportional, process and motor
DSSIU-6-1U. Dedicated 6-channel system interface unit for ultra-stable, high precision fluxgate technology DS series current transducers.
DSSIU-6-1U Dedicated 6-channel system interface unit for ultra-stable, high precision fluxgate technology DS series current transducers. Powers up to 6 x DS50 to DS2000 at the same time. Supports calibration
SEM1600T RTD/TC/SLIDE WIRE SIGNAL CONDITIONER
RTD, THERMOCOUPLE, THERMISTOR (BMS SENSORS), SLIDE WIRE, mv AND RESISTANCE INPUTS ma, VOLTAGE OR BIPOLAR VOLTAGE OUTPUT SENSOR OFFSET (TEMPERATURE) 22 SEGMENT USER LINEARISATION (PROCESS) CONFIGURATION
MCTS II Multi Channel Current Transducer System. Installation Manual
MCTS II Multi Channel Current Transducer System Installation Manual MA MCTS II, Ver. 1.0 1 10/2017 Contents 1. Introduction 2. Receiving of goods 3. Hardware Installation 3.1. Connection of the current
96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status /0/04 panelmeter6x4_gb.doc page subject to alterations; errs including printer s errs 6x4 Digital panel meter Direct
MCU-10. Display. Adjustments. Analogue Output, Measuring. Analogue Output, Setpoint. Standard Process Signal. LED Indication. LCD Display.
Introduction & Selection Guide INTRODUCTION The Brodersen monitoring relays are high quality products incorporating up-to-date circuit design together with modern, efficient components to ensure a long
E-STOP relays, safety gate monitors
Up to Category 2, EN 954-1 Unit features Positive-guided relay outputs: 2 safety contacts (N/O), instantaneous Connection options for: E-STOP pushbutton Reset button LED indicator for: Switch status channel
Out 1 sin / cos 1Vpp. sin / cos 1Vpp. Out 3. sin / cos 1Vpp. Out 4 sin / cos 1Vpp. Interface type SV211 SinCos signal splitter with 4 SinCos outputs
Operating Manual Out 1 sin / cos 1Vpp Input: sin / cos 1 Vpp Out 2 sin / cos 1Vpp Out 3 sin / cos 1Vpp SV 211 Out 4 sin / cos 1Vpp Interface type SV211 SinCos signal splitter with 4 SinCos outputs Product
Advantages. Applications
3 s KH 250 General Data Rated input voltage 2 Vac Rated output voltage 2 Vac Rated power 250 VA Ambient temperature +40 C Degree of protection IP 40 Advantages Compensation for mains voltage fluctuations
Inductive Linear Position Sensor IO-Link LI100P0-Q25LM0-ELIUPN8X3-H1151
Rectangular, aluminium / plastic Versatile mounting possibilities Measuring range indicated via LED Immune to electromagnetic interferences Extremely short blind zones Programmable measuring range 16 bit
Trip amplifier, 1 channel
Trip amplifier, channel Features I II III + + P I out I U out 4 Relay overrange Relay overrange Relay overrange ç 4...0 ma IM4-4-SRi: è 0...0 ma IV + + + > 50 kw 5 6 7 8 9»8 V < 5 ma 50 W Pwr GN/RD 4 5
Temperature Transmitters - DIN Rail Mounted
XTD Features - Non-programmable Models Sensor Types: Models for thermocouple Types J, K, or T Models for RTD Type Pt100 3-wire Select from a variety of pre-configured measuring ranges Internal cold junction
Universal process controller econtrol
Universal process controller Type 8611 can be combined with... Continuous, 2point, 3point and On/Off control Ratio control function Sensor inputs (,, frequency, RDT) Control of proportional, process and
ISOLATED AC/DC POWER SUPPLY
FEATURES IPS-2/24 Transformer isolation Selectable voltage outputs Thermal overload protected Fused outputs Snap track mounted APPLICATIONS AC power isolation Isolated DC power supply 2, 3 & 4 wire transmitter
High-Voltage Isolation Amplifiers / Shunt Isolators. VariTrans P 29000
High-Voltage Isolation Amplifiers / Shunt Isolators VariTrans P 29000 Compact high-voltage isolators with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection.
Two Wire Temperature Transmitter LTX-3000-H-2 LTX-3000-H LTX-3000-W LTX-3000-D
Two Wire Temperature Transmitters (Product Code 18.1 To 18.8) LTX-3000-H-2 LTX-3000-H LTX-3000-W LTX-3000-D Model Wise Description: Sr.No Model Product Description 18.1 LTX-3000-H Two Wire Temperature
AUTOMOTIVE CURRENT SENSOR HC6H500-S. Datasheet
AUTOMOTIVE CURRENT SENSOR HC6H500-S Datasheet Page 1/ 5 Introduction Principle of HC6H Family The HC6H Family is for use on the electronic measurement of DC, AC or pulsed currents in high power and low
Datasheet - BN 20-RZ. Ordering details. Approval. Global Properties :52:27h. Magnetic reed switch / BN 20.
16.08.2014-06:52:27h Datasheet - BN 20-RZ Magnetic reed switch / BN 20 Preferred typ Non-contact principle With pre-wired cable 1 Reed contakts Long life 104 mm x 52 mm x 47 mm Aluminium enlosure Actuating
Materials (other materials see WIKA diaphragm seal program) Model S-10
2.0 Specifications WIKA Tronic catalog pages and data sheets have a consistent layout of technical information that is required to select the correct transmitter. The second page of the data sheet lists
W 250: Compact photoelectric switch series for a broad range of applications
W 0 Photoelectric switches Photoelectric proximity switches, GS Photoelectric reflex switches Through-beam photoelectric switches W 0: Compact photoelectric switch series for a broad range of applications
1500W Single Output Power Supply AK V 100A 0~100A 1500W. 150mVp-p. Adjustment of output current is between 40 ~ 105% of rated output
AK-0 Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 05% ) Programmable output Current ( % ~ 05% ) High efficiency up to % +5V / 0.5A auxiliary output Intelligent LED indicators.5u
VersaPoint I/O Module
Module provides two-input channels for resistive temperature sensors. It supports platinum or nickel sensors according to the DIN standard and SAMA Directive. In addition, CU10, CU50, CU53, KTY81 and KTY84
3000W Single Output Power Supply AK V 200A. 0 ~ 200A 3000W 150mVp-p
000W Single Output Power Supply AK-000 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 0% ) Programmable output Current ( 0% ~ 0% ) High efficiency up to % +V /
Product Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface
Product Information EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface 11/2017 EQN 1337 F Rotary encoders for absolute position values Installation diameter 65 mm
Universal signal transducer UKU
Universal signal transducer with fully isolated inputs and outputs Universal signal transducer Full isolation between the inputs and outputs Signals can be converted and linearised Adjustable signal level
3000W Single Output Power Supply AK V 24V 250A 200A 125A 0 ~ 250A 0 ~ 125A 3000W 0 ~ 200A. 3000W 150mVp-p 3000W
Single Output Power Supply AK-000 series Features : Universal AC input with active PFC Programmable output Voltage ( 0% ~ 0% ) Programmable output Current ( % ~ 0% ) High efficiency up to % +V / 0.A auxiliary
Parameter Symbol Min Typ Max Unit. Parameter Symbol Condition Min Typ Max Unit. Gain ripple - < 7 GHz - ±1.5 - db. = 8 V pp
The DR-DG-10-MO-NRZ is a driver module specially designed for 10 Gbps / 12.5 Gbps data transmission with NRZ format. It exhibits a 20 db gain and can deliver an output signal up to 8 V pp. The DR-DG-10-MO-NRZ
Temperature Sensors Types MBT 5250, MBT 5260 and MBT 5252
Data sheet Temperature Sensors Types MBT 5250, MBT 5260 and MBT 5252 MBT 5250 MBT 5260 MBT 5252 Heavy-duty temperature sensors for controlling cooling water, lubrication oil, hydraulic oil and refrigeration
Positive-guided relay outputs: 8 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous
Contact expander module for increasing the number of available contacts Approvals Unit features Positive-guided relay outputs: 8 safety contacts (N/O), instantaneous 1 auxiliary contact (N/C), instantaneous
Online data sheet. RT-P3221 ZoneControl PHOTOELECTRIC SENSORS
Online data sheet RT-P3221 ZoneControl A B C D E F Illustration may differ Ordering information Type Part no. RT-P3221 1063129 Other models and accessories www.sick.com/zonecontrol H I J K L M N O P Q
96x48. m/s. Digital panel meter 3½-digit DV3, DT3. Without setpoints. Analog output. Sensor supply
m/s Digital panel meter 3½digit DV3, DT3 Without setpoints Analog Sens supply status 06/03/0 panelmeter_gb.doc page subject to alterations; errs including printer s errs Digital panel meter Direct voltage
Universal process controller econtrol
Universal process controller Type 8611 can be combined with... Continuous, 2point, 3point and On/Off control Ratio control function Sensor inputs (,, frequency, Pt100) Control of proportional, process
Thin-Film Cascadable Amplifier 5 to 1000 MHz. Technical Data. UTO/UTC 1005 Series
Thin-Film Cascadable Amplifier 5 to 1000 MHz Technical Data UTO/UTC 1005 Series Features Frequency Range: 5 to 1000 MHz High Dynamic Range High Output Power: +21.0 m (Typ) Noise Figure: 5.0 (Typ) Temperature
minimal installation depth: 70 mm without plug-in terminal 30 additional adjustable setpoints (parameter driven)
Digital panel meter 5-digit M2 red display of -19999 99999 digits (optional green, orange, blue or tricolour display) minimal installation depth: 70 mm without plug-in terminal adjustment via factory default
PU202 Level converter & encoder signal generator without potential separation
Operating Manual PU202 Level converter & encoder signal generator without potential separation Product features: Converts HTL signals from 10 up to 30 V (A / B / Z) into the corresponding TTL / RS422 format
Inductive Linear Position Sensor LI200P0-Q25LM0-HESG25X3-H1181
Rectangular, aluminium / plastic Versatile mounting possibilities LED indicates measuring range Immune to electromagnetic interference Extremely short blind zones Resolution, 12-bit 15 30 VDC Male M12
658 Current to Position Converters
658 Current to Position Converters Current to Position Converters for Solid State Switching Output Adjustable Zero, Span and Deadband Two Wire Input from Controller Operates with 90 to 1000 Ω Feedback
Humidity Temperature Sensor TFG80 Duct version with Polyga measuring element
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH D-71145 Bondorf. Germany D-07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-62704-0.
Technical Information Barrier RB223
TI00132R/09/EN/13.14 71275790 Products Solutions Services Technical Information Barrier RB223 One or two-channel barrier Loop-powered barrier for the safe separation of 4 to 20 ma standard signal circuits
VariTrans P V. Safe and Sound.
1000 V. Safe and Sound. VariTrans P 29000 Compact high-voltage isolation amplifiers with safe galvanic isolation, VariPower broad-range power supply and genuine calibrated range selection. Isolation Amplifiers
VISOR Color. Vision sensor for the most precise object detection. made in Germany HIGHLIGHTS OF THE VISOR COLOR
VISOR Color Vision sensor for the most precise object detection made in Germany The same or not the same? The VISOR Color detects even the smallest of colour nuances more reliably than the human eye. This
Electronically controlled proportional pressure regulating valves
Overview Description airfit control Electronically valve G1/4, G3/8, Type SRE-.. airfit control Electronically valve G3/8, G1/2, Type CRE-.. airfit control Electronically valve G3/4, G1, Type A25RE-..
DR-AN-40-MO 40 GHz Analog Medium Output Voltage Driver
40 GHz Analog Medium Output Voltage The DR-AN-40-MO is a wideband RF non-inverting amplifier module designed for analog applications at frequencies up to 40 GHz. The DR-AN-40-MO is characterized by a low
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 510-S I PN = 500 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated
72x36. Digital panel meter with microprocessor based technology 4-digit PVE4, PTE4, PFE4, PFL4. Galvanically insulated
P VA Digital panel meter with microprocess based technology digit PVE, PTE, PFE, PFL Galvanically insulated free scalable s/hysteresis Analogue galvanically insulated Min/max memy status //0 panelmeterx6analog_gb.doc
Optimising controls Vacuum switches
Vacuum switches, pneumatic Converts a vacuum level to a pneumatic signal. Vacuum-actuated membrane linked to a pneumatic switch. Available preset or with adjustable vacuum level. Unit Value Feed pressure,
KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP8-Rotate 8 (4) channel telemetry
Telemetrie-Messtechnik Schnorrenberg
Telemetrie-Messtechnik Schnorrenberg CT16-Wheel User manual TMS Telemetrie-Messtechnik Schnorrenberg Dipl.-Ing. Werner Schnorrenberg Habichtweg 30, D-51429 Bergisch Gladbach, Tel: 02204-9815-52, Fax: 02204-9815-53,
400 (±2,5 V/ V/ ,3% V4A
LVDT Inductive Position Transducer - Hydraulic Series Series Hydraulic position measurement in hydraulic cylinders of machine controls ranges 10...300 mm temperature -40...+150 C (sensors) 0...+60 C (external
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 210-S/SP3 I PN = 100 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated
Current consumption ma solenoid current consumption ( max 300 ma) Hz % V ma. Housing dimensions mm 120(d) x 99(h) x 23(w)
89 610/112 ED EWM-A-SV ANALOG AMPLIFIER CARD SERVOVALVE CONTROL RAIL MOUNTING TYPE: DIN EN 50022 OPERATING PRINCIPLE This card is designed for a dynamic control of servovalves with the current output controlled
Type 420C 85 C Long Life, Inverter Grade, Plug-in, Aluminum Best Value, High Ripple, Board-Mount Type
Specifications Type 420C is the PC-mount version of the Type 520C screw terminal, computer grade capacitor and the 85 C version of the Type 450C Inverter Grade capacitor. It delivers the ripple current
Emergency stops and safety stops
Emergency stops and safety stops Contents Page Why do you need an Emergency stop? : Emergency stop for enclosure installation INC : Emergency stop for enclosure installation INC Tina : Emergency stop with
ProLine P Precise Temperature Measurement at High Voltage Potentials up to 6.6 kv
Precise Temperature Measurement at High Voltage Potentials up to 6.6 kv When temperatures are to be measured using Pt100 resistance thermometers in high-voltage environments, standard temperature transmitters
SHF Communication Technologies AG
SHF Communication Technologies AG Wilhelm-von-Siemens-Str. 23 Aufgang D 12277 Berlin Marienfelde Germany Phone ++49 / 772 05 10 Fax ++49 / 753 10 78 E-Mail: sales@shf.biz Web: http://www.shf.biz Datasheet
IP65 IP mVp-p 13.5 ~ 17V. 150mVp-p 17 ~ 22V 22 ~ 27V. Can be adjusted by internal potentiometer or through output cable
IP65 IP67 SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.5 10.8 ~ 13.5V
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and secondary circuit.
Current Transducer LF 510-S I P N = 500 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and secondary circuit. Features Bipolar and insulated
Visor object sensor for part detection
Visor object sensor for part detection Detects the right part in the wrong place and vice versa made in Germany Glue dot present? Early detection by monitoring presence in this case caps for the beverages
Connection. Input EEx ia IIC. Sense. Fine tuning adjustment. Fine tuning amplifying. Amplifying. Adjustment. Output. Composition
Converter Connection 1-channel EEx ia IIC for 4-wire and 6-wire bridges Analogue output 0/4 ma... 20 ma or 4mA...-12mA Full bridge load cells and strain gauges circuit for resistance bridges up to 17 Ω
W 23-2: Focussing on what is essential and economic
Product group W - BGB Photoelectric proximity switch Energ. Photoelectric proximity switch W -: Focussing on what is essential and economic Photoelectric reflex switch The indicator LEDs on the W - offer
Product description. At a glance. performance in a metal housing coating available Precise autocollimation optics. sensors
W- Laser Small photoelectric sensors W High-performance photoelectric sensor family with laser optics Product description At a glance performance in a metal housing coating available Precise autocollimation
Analogue temperature controllers
Analogue temperature controllers CT8A Input by J-K thermo-couple or by thermo-resistance Pt 00 (-wire) regulation modes : ON/OFF or proportional derivative selected by wiring Relay output Specifications
MACX MCR-EX-T-UI-UP. Extract from the online catalog. Order No.:
Extract from the online catalog MACX MCR-EX-T-UI-UP Order No.: 2865654 Freely programmable Ex-i temperature transducer with analog output and 1 limit value relay, standard configuration, resistance thermometer
PRODIS. PD-INC Digital Process Meter for sensors with incremental output. Digital Process Meters. Datasheet
Digital Process Meters Digital Process Meter for sensors with incremental output Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does
PCB Mount Power Film Capacitors. Highlights - High capacitance - High ripple current - Self-healing. Specifcations. Dimensions
Typ e L Polypropylene oard Mount Link apacit ors Specifcations Type L series uses the most advanced metallized flm technology for long life and high reliability in Link applications. This series combines
Series BDF for Process
Series DF for Process LARGE DISPLAYS for Process signals DF-xx-32 for ma signals DF-xx-36 for Vdc signals IDEAL SOLUTION for reading process signals at long distances, with scaled values on display, coming
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current transducer LF 2010-S I PN = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and insulated
VARIO RTD 2. Function. I/O Extension Module With Two Analog Input Channels for the Connection of Temperature Shunts (RTD) User Manual
I/O Extension Module With Two Analog Input Channels for the Connection of Temperature Shunts (RTD) User Manual 02/2003 # % # # This data sheet is only valid in association with the documents of the used
DC/DC Converter Input Vdc Output up to 8A/40W
PKA 2000 I DC/DC Converter Input 19-34 Vdc Output up to 8A/40W Key Features Single, dual and triple output 500 V dc isolation voltage MTBF >2 million hours at 75 C case temperature Complete, no extra filters
SINEAX U 553 Transducer for AC Voltage
With power supply RMS value measurement Carrying rail housing P/0 Application he transducer SINEAX U 55 (Fig. ) converts a sinusoidal or a distorted AC voltage into a load independent DC current or a load
POWER AMPLIFIERS 4 QUADRANTS 3x500 VA to 3x1500 VA - THREE-PHASES
PERFORMANCES High accuracy High stability Fast transients High inrush current facilities Wide bandwidth Very low distortion Quadrant change without transition Very low output impedance Low noise RS232
R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY
Čapkova 22 678 01 Blansko tel.: +420 516 416942, 419995 fax: +420 516 416963 R24 DISPLAY MODULE WITH ACTIVE OUTPUT AND RELAY Display module is designed for measuring the resistance, the signal from the
Current Transducer CTSR 1-P = 1A
Current Transducer CTSR 1-P I PRN = 1A For the electronic measurement of current: DC, AC, pulsed..., with galvanic isolation between the primary (high power) and the secondary circuit (electronic circuit).
For more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
Analog signal converters CC range
Analog signal converters CC range Benefits and advantages 2CDC 28 Fb Product range for analog signal processing CC-U range 8 different standard signal outputs on one device Input and output side universally
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LF 2010-S/SPA7 I P N = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and
DS400ID. Specification highlights Symbol Unit Min Typ Max. Features. Applications: Linearity error maximum 1.5 ppm. MPS for particles accelerators
Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 600A Features Linearity error maximum 1.5 ppm Fluxgate,
E E E E E E E E E E E E IP65 IP67
½ IP65 IP67 series SPECIFICATION MODEL OUTPUT INPUT PROTECTION ENVIRONMENT SAFETY & EMC OTHERS NOTE DC VOLTAGE RATED CURRENT RATED POWER RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE Note.5
VR20 - Inductive sensor (LVDT) Measurement range from 25 to 600 mm
VR20 - Inductive sensor (LVDT) Measurement range from 25 to 600 mm Technical data: Measurement range [mm] 0 25 0 50 00 80 0 100 0 150 0 200 0 300 0 600 Linearity 0,30% (0,20% Optional), 1,50% for a range
Electric actuators kn
Features Microprocessor controlled with automatic self-calibration on start up LED indication of actuator status Wear-free distance measuring system - no potentiometer Permanent storage of stroke in EPROM
Series GLET Accessory for dataloggers series GL in modular enclosure
PRESSURE LOAD TORQUE POSITION ROTARY ANGLE TILT ACCELERATION VIBRATION RATE SIGNAL CONDITIONER DATALOGGER Series GLET Accessory for dataloggers series GL in modular enclosure Models: GLET-IU-BNC-BA4 passive,
Galvanic Isolation. 0/4-20mA, 0/2-10V DC 0/4-20mA, 0-10V DC Frequency 0-10kHz. Output Relay SPDT Solid State Output. Setpoint/Hysteresis
Introduction & Selection Guide INTRODUCTION Process control and monitoring systems often utilise a large number of standard process signals; Voltage levels, current loops, temperature and pulsed signals
Features. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer LF 2010-S/SPA0 I P N = 2000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Bipolar and