Sensors. Sensors v03. Navarra de Componentes Electrónicos, S.A. Polígono Industrial Municipal Vial T2 Nº Tudela Navarra Spain

Size: px

Start display at page:

Download "Sensors. Sensors v03. Navarra de Componentes Electrónicos, S.A. Polígono Industrial Municipal Vial T2 Nº Tudela Navarra Spain"

Bonnie Parsons
6 years ago
Views:

1 Sensors Sensors v0 Navarra de Componentes Electrónicos, S.A. Polígono Industrial Municipal Vial T2 Nº22 00 Tudela Navarra Spain Tel: Fax:

2 Piher is recognised as a world leader in custom controls and sensor solutions by the top Land Vehicle/Automotive and Appliance players. In this catalogue you will find a selection of the most prolific of our rotary and linear sensors for these applications. The pursuit of the most costeffective total solution for your needs is firmly embedded in our business philosophy, so whatever your requirements may be, be sure that Piher will deliver. Two more catalogues are available depending on the technology used: Rotary sensors Linear sensors Series MRA ERA Life Lin SMD Op.Temp Page PSC0 PT0V PT0H PTC0V PTC0H PTV PTH PTCV PTCH PS PC PC SC HVAC v2. HVAC v N A Z MT series PCR NPL PL multiturn up to mm º 0º multiturn up to 0 2mm 7 >0M 0K 0K 0K 0K up to 200k up to 200k 0K 0K 0K 2K 2K 00K 00K 200K 200K 2M 8K M 0K 2K º 2 2 SOON SOON PS YES YES YES YES 0 to 0 2 to +70* 2 to +70* 0 to to to +70* 2 to +70* 0 to to to +8 2 to +70* 2 to +70* 0 to +8 0 to +8 0 to to to to +8 0 to to +0 2 to +70 MRA: Mechanical rotation angle (degrees) ERA: Electrical rotation angle (degrees) Lin: Absolute linearity (percentage) *up to +8ºC depending on the application Contact incremental encoders & rotary switches Control potentiometers Should you be interested in any of these catalogues or require further information please do not hesitate to contact you nearest Piher supplier. Information contained in and/or attached to this document may be subject to export control regulations of the European Community, USA, or other countries. Each recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher International Corp. Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration Regulations. Diversion contrary to US law is prohibited. All models of this catalogue can be adapted to meet customer s requirements. Request full datasheets from your nearest Piher supplier or visit ISO/TS 99 BUREAU VERITAS Certification Nº 270 ISO 900 BUREAU VERITAS Certification Nº ESPMDD008 ISO 00 BUREAU VERITAS Certification Pb Nº to ELV (2000//EC) According / RoHS (2002/9/EC) NOTE: The information contained in this catalogue should be used for reference purposes only. Due to continous product improvements, we reserve the right to make specification and/or product changes without prior notification. Please refer to for updated information.

Applications for Automotive Windscreen wiper speed & delay controls Headlight levelling controls & sensors Audio controls Instrument Panel light dimmers Power sunroof controls Antipinch sensors

controls Adaptive front lighting HVAC sensors Traction control The Automotive market is one of the key drivers of Piher s success.

3 Applications for Automotive Windscreen wiper speed & delay controls Headlight levelling controls & sensors Audio controls Instrument Panel light dimmers Power sunroof controls Antipinch sensors Anticollision Radar HVAC controls Rearview mirror memory sensors Navigation & Infotainment controls Airbag enable/ disable controls Convertible Hood control Seat positioning sensors & Seat heating controls Adaptive front lighting HVAC sensors Traction control The Automotive market is one of the key drivers of Piher s success. Demanding new and cost effective ideas year on year has shaped the company in to what it is today: proactive and customer driven. Since the seventies Piher has served the key European Automotive OEM s and component suppliers and has developed an expertise in providing custom Control and Sensor solutions unrivalled in today s Automotive sector. Along with the acquisition of a prestigious array of quality awards representative of this sector: ISO 900, QS9000, ISO 00 and ISO TS 99, Piher s products are listed in the IMDS database providing detailed information on product recyclability. Long Life typical applications: NonContacting long life angle/position sensor Absolute Rotary Position Sensor Pedal Position Sensor Throttle/EGR Valve and Gear Position Sensor Height & suspension Sensor NonContacting Potentiometer FloatLevel Sensor Motorshaft Position Sensor Precision Robotics,industrial equipment, HVAC monitoring & control... 2

4 PSC0 contactless sensor Main features Technology Vertical Hall Effect Linearity ±% absolute (0.% upon request) Design simple & robust Programmable angular range up to 0 (without dead band) Programmable linear transfer characteristics some positive slopes & one negative slope can be programmed in the same transfer characteristic; up to programmable points Output Selectable: Analog (Ratiometric), PWM, SPI Programmable switch output Angular resolution analog & PWM: 2 bits serial Protocol (SPI): bits Full redundant option ID Number (0 bit) Selfdiagnostic features Rotational life* >0M cycles Operating temperature 0ºC to +0ºC Voltage protection +20V over voltage protection and 0V reverse voltage protection Supply voltage V ±0% (others upon request) Sealing IP (others upon request) Panel mount version available (*) depending on application and mounting Standards EN 022 class B, emission radiated EN 022, class B, emission radiated EN 0002, ESD on housing and connections EN 000, immission HF radiated EN 000, Burst EN 000, Surge EN 000, immission HF conduted EN immission magnetic field IEC 09, Insulation resistance IEC 09, Dielectric strenght IEC 82, Vibration IEC 8227 Shock MHz MHz contact / air MHz on supply lines / signal lines on supply lines / signal lines MHz 0Hz 00VDC, bar, 2s VAC, 0Hz, min, bar Amax=0.7mm, f= Hz

5 Dimensions R Dimensions (panel mount version) Plastic bushing (Zamak version upon request) Metal shaft UNEF2A xº..... () Panel mount version

6 Output function examples v v v 0º 0º 0º v v v 0º 0º 0º v v v 0º 0º 0º Redundant examples: v v 0º 0º

PT0 & PTC0 0mm rotary sensor Main features PT0 PTC0 Plastic material according to UL9V0 upon request Resistive element carbon cermet Dust proof enclosure Supplied in magazines for automatic insertion

7 PT0 & PTC0 0mm rotary sensor Main features PT0 PTC0 Plastic material according to UL9V0 upon request Resistive element carbon cermet Dust proof enclosure Supplied in magazines for automatic insertion Wiper positioned at 0% or fully clockwise Low & extra low torque versions Mechanical detents Special tapers Special switch option upon request SPDT switch Cut track option upon request Laser trimming for tighter tolerances Crimped terminals available Special linearity option % upon request Electrical specifications PT0 PTC0 Range of values* Tolerance* ± 20% ± 0% Max. Voltage 200 VDC (lin) 00 VDC (no lin) Nominal Power 0 C (22 F) 70 C (8 F) 0. W (lin) 0.07 W (no lin) 0. W (lin) 0.7 W (no lin) Taper* Lin, Log, Alog (Log & Alog only Rn k) Residual resistance* Equivalent noise resistance Operating temperature 2 C + 70 C** 0 C + 90 C ( F + 8 F) 0 C + 90 C ( 0 F + 9 F) (*) Others upon request (**) Up to 8 C depending on application Mechanical specifications Mechanical rotation angle 2 ± Electrical rotation angle 220 ± 20 Torque 0. to 2 Ncm. (0. to 2.7 inoz) Stop torque > Ncm. ( >7 inoz) Life 0K cycles

8 V(0). 0.. S 0 A E 0.. H(2.) A S E.. A = Initial S = Wiper E = Final V() H() Rotors (wipers positioned at 0%) L = Screwdriver thru hole M = Hexagonal thru hole G = Hexagonal thru hole K = Cross slot thru hole R Y = Adjustable from terminal side. Z = Adjustable from collector side L X = Adjustable from collector side L W = Adjustable from terminal side 7

PT & PTC mm rotary sensor Main features PT PTC Plastic material according to UL9V0 upon request Resistive element carbon cermet Dust proof enclosure Long life model Supplied in magazines for

9 PT & PTC mm rotary sensor Main features PT PTC Plastic material according to UL9V0 upon request Resistive element carbon cermet Dust proof enclosure Long life model Supplied in magazines for automatic insertion Wiper positioned at 0% or fully clockwise Low torque versions Mechanical detents (up to 27) Special tapers Special switch option upon request SPDT switch Cut track option upon request Laser trimming for tighter tolerances Crimped terminals available Special linearity upon request upon request Electrical specifications PT PTC Range of values* Tolerance* ± 20% ± 0% Max. Voltage 20 VDC (lin) 2 VDC (no lin) Nominal Power 0 C (22 F) 70 C (8 F) 0.2 W (lin) 0.2 W (no lin) 0.0 W (lin) 0.2 W (no lin) Taper* Lin, Log, Alog (Log & Alog only Rn k) Residual resistance* Equivalent noise resistance Operating temperature 2 C + 70 C** 0 C + 90 C ( F + 8 F) 0 C + 90 C ( 0 F + 9 F) (*) Others upon request (**) Up to 8 C depending on application Mechanical specifications PT PTC Mechanical rotation angle 2 ± Electrical rotation angle 20 ± 20 Torque 0. to 2. Ncm. (0.7 to. inoz) Stop torque > 0 Ncm. ( > inoz) Life 0K, 00K, 200K cycles 0K cycles (*) Others upon request 8

10 V(2.) S 7 VD H() H(2.) HB A E A = Initial S = Wiper E = Final , A S E ,. Hc (only PT)

11 Ha (only PTC). Va(2.) VD() (only PT) V() V(7.) Ø. Rotors Ø.02 Ø L = Screw driver thru hole M = Hexagonal thru hole N = Removable shaft or thumbwheel Wiper position Wiper position G = Ø. Removable shaft or thumbwheel Rotor C Rotor F Rotor R Rotor T wipers positioned at initial wipers positioned at 0% L L Y = Adjustable from terminal side Z = Adjustable from collector side X = Adjustable from collector side W = Adjustable from terminal side 0

PS mm SMD rotary sensor Main features Leadfree relfow soldering compatible Plastic material according to UL9V0 Resistive element carbon Dust proof enclosure Wiper positioned at 0% or fully clockwise

12 PS mm SMD rotary sensor Main features Leadfree relfow soldering compatible Plastic material according to UL9V0 Resistive element carbon Dust proof enclosure Wiper positioned at 0% or fully clockwise Mechanical detents (up to 27) Special tapers Absolute linearity % (upon request) Electrical specifications Range of values* K to M Tolerance* ± 0% Nominal Power 0 C (22 F) Taper* Linear Residual resistance Equivalent noise resistance Operating temperature 0 C + 8 C (*) Others upon request Mechanical specifications Mechanical rotation angle 2 ± Electrical rotation angle 20 ± 20 Torque 0. to 2. Ncm. (0.7 to. inoz) Stop torque > 0 Ncm. ( > inoz) Mechanical life 0K cycles DIMENSIONS R

PC & PC SC mm rotary sensor Main features Plastic material according to UL9V0 Resistive element Dust proof enclosure Modular gang type (up to ) Stereo matching Nut & washer Special tapers Switch

13 PC & PC SC mm rotary sensor Main features Plastic material according to UL9V0 Resistive element Dust proof enclosure Modular gang type (up to ) Stereo matching Nut & washer Special tapers Switch option Shafts available Bushings available 0A/20v switch rating available carbon upon request upon request (plastic, metallic) (PC7 series) Electrical specifications Range of values* Tolerance* Max. Voltage Nominal Power Taper* Residual resistance* Equivalent noise resistance Operating temperature ± 20% ± 0% 20 VDC (lin) 2 VDC (no lin) 0 C (22 F) 0.2 W (lin) 0. W (no lin) Lin, Log, Alog (Log & Alog only Rn>k) 0.% Rn ( min.) 2 C + 70 C** ( F + 8 F) (*) Others upon request (**) Up to 8 C depending on application Mechanical specifications Mechanical rotation angle 00 ± Electrical rotation angle 280 ± 20 Torque 0. to. Ncm. (0.7 to 2. inoz) Stop torque > 0 Ncm. ( > inoz) Max. torque nut (binding out) < 80 Ncm. (2 inoz) Thrust and pull in the shaft > 2 N Life 2K cycles 2

14 PC S/D/T/C..H... M0 x E S. A A = Initial S = Wiper E = Final Mounting surface S D T C. PC SV... M0 x 0.7 S E A PC SC PIHER thickness = 0.

HVAC position sensor Main features Resistive element Dust proof enclosure Long life model Packaging Wiper positioned at 0% carbon plastic trays Electrical specifications Resistive value* K7

15 HVAC position sensor Main features Resistive element Dust proof enclosure Long life model Packaging Wiper positioned at 0% carbon plastic trays Electrical specifications Resistive value* K7 Tolerance* ± 20% Linearity ± 2% Max. Voltage VDC (lin) Nominal Power 0 C (22 F) 0.2 W (lin) Taper* Linear Residual resistance % Rn Equivalent noise resistance 20% Rn Operating temperature 0 C + 8 C (*) Others upon request Mechanical specifications Mechanical rotation angle 0º (endless) Electrical rotation angle 20º, 70º, 80º, 20º, 0º Torque 0.2 to.2 Ncm. Life 00K cycles

16 V R 0º R2. R27. R2.2. A A SEND POSITION 90º SEND POSITION 90º V

17 N / A mm low profile rotary sensor Main features N A Mouting methods SMD, through hole, horizontal Resistive element carbon Dust proof enclosure Packaging embossed tape, bulk Low profile (. mm) Linearity/precision ±% (absolute) up to º (standard is 7º) Shaft insertable from both sides Rotor T polarised Long life version Endless rotation Fully customiseable Leadfree relfow soldering compatable Incremental encoder version available (E series) Rotary switch version available (S series) Hybrid pulse generatorpotentiometer version (contact PIHER for detailed information) Electrical specifications N A Range of values* k, 0k, 00k k, 0k Tolerance* ± 0% ± 0% Max. Voltage 20 VDC Nominal Power 0. 0ºC Taper Linear special Operating temperature 0 C + 20 C (*) Others upon request Mechanical specifications N A Mechanical rotation angle 0º Electrical rotation angle 0 ± 0 0º ± 7º Torque 20 mn.m Mechanical life* 00K cycles (*) 200K cycles upon request Z series: up to 2M cycles

18 SMD version SOLDER Through hole version (WITHOUT SOLDER MASK) SOLDER MASK Horizontal adjust version * This drawing is just an example, horizontal adjust versions will be studied case by case 7

19 Z 2 millon cycle mm low profile rotary sensor Main features Mouting methods Resistive element Dust proof enclosure Packaging Low profile Linearity/precision Shaft insertable from both sides Rotor Endless rotation Fully customiseable Leadfree relfow soldering compatable SMD, through hole carbon embossed tape, bulk (. mm) ±% (absolute) T polarised Electrical specifications Value* K Tolerance* ± 0% Max. Voltage** 27 VDC (K version) Nominal Power 0. 0ºC Taper Linear Operating temperature 0 C + 20 C (*) Others upon request (**) Max. voltage is dependent on nominal power and resistance value. Max. voltage can not exceed 20VDC Mechanical specifications Mechanical rotation angle 0º Electrical rotation angle 0 ± 0 Torque 20 mn.m Mechanical life up to 2M cycles 8

MT Series Multiturn sensors Main features Resistive element Dust proof enclosure Linearity/precision Fully customiseable carbon ±% (independent) Electrical specifications Value 0k Tolerance ± 20% Max.

20 MT Series Multiturn sensors Main features Resistive element Dust proof enclosure Linearity/precision Fully customiseable carbon ±% (independent) Electrical specifications Value 0k Tolerance ± 20% Max. Voltage 8 VDC Nominal Power 0. 0ºC Taper Linear Operating temperature 0 C + 8 C Mechanical specifications Mechanical rotation angle from to 0 turns Electrical rotation angle 0 ± 0 Torque 20 mn.m Mechanical life 8K cycles 9

Calibrated voltage dividers Special ohmic values Functional (incircuit) trimming Laser trimming unlimited

resistors: ±0%, ±% Matching capability ±2%, ±% Voltage ratio Nontrimmed resistors: ±0% Trimmed resistors: ±2% TRC

21 Printed Circuit Resistors linear / rotary sensors Main features Low profile Low cost No insertion costs No insertion errors No soldering problems Fixed & variable resistor combinations High frequency performance Calibrated voltage dividers Special ohmic values Functional (incircuit) trimming Laser trimming unlimited excellent Electrical specifications Resistance range Tolerance Nontrimmed resistors: ±0%, ±20%, ±0% Trimmed resistors: ±0%, ±% Matching capability ±2%, ±% Voltage ratio Nontrimmed resistors: ±0% Trimmed resistors: ±2% TRC better than 00 ppm/ºc Mechanical specifications Mechanicall life (voltage dividers) from 0K to million cycles (depending on each individual case) 20

22 Wiper examples Ref. 0 Ref. 82 Working position Unloaded position Ref. 07 Ref Working position.9.8 Unloaded position 0.0 Ref. 09 Ref. 8 Working position 2 2 Unloaded position

NPL linear position sensor Main features Fixation methods / clip style Resistive element Overmoulding technology Versions inward outward without clip straight crimped carbon metal, & plastic

23 NPL linear position sensor Main features Fixation methods / clip style Resistive element Overmoulding technology Versions inward outward without clip straight crimped carbon metal, & plastic Electrical specifications Range of values* K to 00K ohms Tolerance ± 0% Max. Voltage** 0 VDC to 00 VDC Nominal Power ºC Taper* Linear Operating temperature 0 C + 0 C Relative linearity* ± 2% (*) Others upon request (**) Depending on model Mechanical specifications Mechanical travel 7.2, 8, 2 mm electrical travel to 2 mm Sliding force 0 mm/sec Mechanical life* 0K cycles Stop strenght 0N for secs 22

24 Plastic versions Ø 2 Ø (INEND) (WIPER) (OUTEND). 2.8 NPL2P A B NPLP NPL07P All dimensions in mm. Clip style (NPL2P). (WIPER) (INEND) (OUTEND). Metal version (NPL08M) Ø A B S A E..08 PCB Hole Layout.08 INWARD FACING CLIPS OUTWARD FACING CLIPS (INEND) (WIPER) (OUTEND) PCB Hole Layout 2. PCB Hole Layout CRIMPED STRAIGHT 8. PCB Hole Layout..08. PCB Hole Layout..08 S S A E E

PL0 linear position sensor Main features Dust proof enclosure Cut track Resistive element Shielded versions Stackable upon request (at initial of final position) carbon Electrical specifications

25 PL0 linear position sensor Main features Dust proof enclosure Cut track Resistive element Shielded versions Stackable upon request (at initial of final position) carbon Electrical specifications Range of values* Tolerance* ± 20% ± 0% Max. Voltage 00 VDC (lin) 0 VDC (no lin) Nominal Power 0 C (22 F) 0.2 W (lin) 0.2 W (no lin) Taper* Lin, Log, Alog (Log & Alog only Rn k) Residual resistance 0.% Rn ( min.) Equivalent noise resistance % Rn ( min.) Operating temperature** 2 C + 70 C ( F + 8 F) (*) Others upon request (**) Up to 8 C depending on application Mechanical specifications Mechanical travel electrical travel Sliding force Mechanical life Stop torque force 0mm ± mm 7mm ± mm to N (. to 0 oz) 2K cycles >0 N (>79 oz) 2

26 8. ±0. 9. ±0.2 0 ± ±0.2 PIHER 8 ±0. A B2 C 0 ±0. Only PL0M = =. 0 ±0. 7. ±0.2 Only PL 0 MS A B2 0 C 7. A = Initial terminal B2 = Wiper C = Final terminal Fixation means 2 ±0. M A 0.7 C P M.. M ± ±0. 2 B Ø A Ø. OPTIONS TAPS CODE 8. ±0. 2 ±0. 0 ± 9. ± A = Initial terminal B2 = Wiper C = Final terminal Only PL 0 MS 0. ±0.2. B2 7. A B2 T / T / 2 T 2/ PIHER C Only PL0M 8 ±0. = =. 7. ±0.2 A / /2 2/ C Ø. 0 ±0. 0 ±0. A= Initial B= Wiper C= Final Initial cut track (A) SCHEME CUTTRACK PL 0 Final cut track (C) A B C A B C 2

27 Sales Network NAVARRA DE COMPONENTES ELECTRÓNICOS, S.A. NACESA (Factory & Headquarters), Polígono Industrial Municipal, Vial T2 Nº22, 00 Tudela Spain, Tel: , Fax: , PIHER INTERNATIONAL CORPORATION, 0 Northwind Blvd., Libertyville, Illinois 008 USA, Tel , Fax , Sandra.rieke@meggitt.com CATALUNYA BRANCH OFFICE, Salvador Espriu,. 2., 0800 Barcelona Spain, Tel: , Fax: , mariadolores.recacha@meggitt.com PIHER BENELUX INTERNATIONAL BV, Ambachtsstraat 2A, 8 RH Nijkerk Holland, Tel: + 27, Fax: , piher.benelux@meggitt.com REGIONAL SALES MANAGER TAIWAN & SOUTH EAST ASIA, F, No., Alley 9, Lane 297, Yuantong Rd., Zhonghe City, Taipei County 2, Taiwan, Tel: , Fax: , alex.cheng@meggitt.com REGIONAL SALES MANAGER FRANCE, Polígono Industrial Municipal, Vial T2 Nº22, 00 Tudela Spain, Tel: (0) 27, Fax: (0) 27 2, yvan.mercier@meggitt.com PIHER INTERNATIONAL LTD, The Laurels, Jays Close, Viable Industrial Estate, Basingstoke, Hants. RG22 BS, UK, Tel ddt: , Customer Service telephone: + (0)79 22, Customer Service fax: , peter.slater@meggitt.com PIHER INTERNATIONAL GMBH, Orchideenstr., 902 EckentalBrand, Germany, Tel: , Fax: , piher.germany@meggitt.com REGIONAL SALES MANAGER CHINA & HK, Meggitt (Xiamen) Sensors & Controls Co., Ltd., No. 20, South Gaoqi Road, Xiamen, Fujian Province, 00, P.R. China, Tel: ext. 822, Fax: , Cell: , charles.qi@meggitt.com PIHER INTERNATIONAL ITALIANA SRL (Exclusive Representative), Via Alzaia Trieste, Nº, Cesano Boscone, Milan Italy, Tel: , Fax: +9020, piher@piheritaly.com For our full distribution network and further product information please visit

Encoders and switches

Encoders and switches Encoders and switches v02 Navarra de Componentes Electrónicos, S.A. Polígono Industrial Municipal Vial T2 Nº22 31500 Tudela Navarra Spain Tel: +34 948 820450 Fax: +34 948 824050 www.meggitt.com