Vert-X 16. Applications Servodrives Dancer arm Operating table

Size: px
Start display at page:

Download "Vert-X 16. Applications Servodrives Dancer arm Operating table"

Transcription

1 Version B C Electrical Data Measuring range Independent linearity see table B see table C Max. hysteresis see table B see table C Resolution see table B see table C Max. repeatability see table B see table C Sample rate see table B see table C System propagation delay see table B see table C Max. temperature coefficient of the output signal ppm/ K Min. life (electrical) years Power supply voltage VDC 5 (±10 %) 5 (±10 %) Current consumption without load (typical) see table B see table C Min. ohmic load at output see table B see table C Max. capacitive load at output see table B see table C PWM frequency see table B - Reverse polarity protection of power supply see table B see table C Electrical connection see table B see table C Mechanical Data Mechanical range 360 (continuous) 360 (continuous) Max. starting torque at IP54 / IP65 Ncm 0.5 / / 3 Max. rotating speed rpm Min. life (mechanical) movements 50 Mio. 50 Mio. Max. permitted axial shaft load N Max. permitted radial shaft load N Operating temperature C see table B Storage temperature C see table B Protection class IP54 / IP65 IP54 / IP65 Applications Servodrives Dancer arm Operating table Features Compact dimensions Mounting tabs with metal inlets Contactless measuring method Long life High accuracy of measurement Use in cramped installation conditions Optionen Custom electrical angles Output signal X... Y% UB Custom shaft design Custom cable / wires Standards EN classe B, emission radiated ( MHz) max. 30 db(µv/m) max. 30 db(µv/m) EN classe B, emission radiated ( MHz) max. 37 db(µv/m) max. 37 db(µv/m) EN , ESD on housing and connections (contact / air) 4 / 8 kv 4 / 8 kv EN , Iimission HF radiated ( MHz) 30 V/m 30 V/m EN , burst (on supply lines / signal lines) 1 / 0.5 kv 1 / 0.5 kv EN , surge (on supply lines / signal lines) 0.5 kv 0.5 kv EN , immission HF conducted ( MHz) 10 Vemk 10 Vemk EN , immission magnetic field (50Hz) 30 A/m 30 A/m IEC Insulations resistance (500VDC, 1bar, 2s) 20 GOhm 20 GOhm IEC Dielectric strenght (VAC, 50Hz, 1min, 1bar) 1 kv 1 kv IEC Vibration (Amax = 0.75mm, f = Hz) 20 g 20 g IEC Shock 50 g 50 g

2 Interface % UB PWM SPI % UB Independent linearity % meas. range ±0.3 ±0.3 ±0.3 Max. hysteresis Resolution bit Max. repeatability Sample rate fast mode khz (5) (5) 2.2 Sample rate slow mode khz (0.55) System propagation delay fast mode µs (800) (800) 400 System propagation delay slow mode µs (600) Current consump. without load (typ.) fast mode ma (16) (16) 16 Current consump. without load (typ.) slow mode ma (10) Min. ohmic load at output kohm Max. capactitive load at output nf PWM frequency khz (... 1) - Reverse polarity protection of power supply yes yes yes Electrical connection wires wires ribbon cable Cross section of single wires mm² 0.25 (AWG24) 0.25 (AWG24) 0.09 (AWG28) Redundancy feasible yes yes no Operating temperature C Storage temperature C Table Version B Additional features Full resolution and accuracy at programmed electrical angle Additional options Electrical angle within programmable Redundancy Operating temperature C Fast mode / slow mode selectable (Standard: slow mode, except for SPI: fast mode)

3 Power supply voltage 2 Standard: 5VDC Output signal 2 Standard: 10%... 90% of power supply 4 Optional: x%... y% of power supply (within %) 5 Standard: PWM 8 Standard: SPI Ordering code Version B Output characteristics 1 Standard: Positive gradient CW 2 Optional: Positive gradient CCW 3 Optional: Redundant, positive gradient CW 4 Optional: Redundant, positive gradient CCW 5 Optional: Redundant, crossed signal curves Electrical connection 1 Standard: Ribbon cable 6pol 2 Standard: Wires 3pol (not SPI) 9 Optional: Special cable; special wires Vert-X Length of wires / ribbon cable 01 Optional: 10cm 02 Standard: 20cm 03 Optional: 30cm 04 Optional: 40cm 05 Optional: 50cm 99 Optional: Special length Electrical angle 36 Standard: Electrical angle 360 xx Optional: 10 to 35; Declaration in 10 steps 99 Optional: Special angle Sensor principle 7 B Mechanical version 1601 Standard: 6mm shaft D-shape ; IP Standard: 6mm shaft D-shape ; IP Optional: Special shaft

4 Interface SSI Incremental (A,B,Z) Independent linearity % ±0.5 ±0.5 Max. hysteresis Resolution bit (quadrature) Resolution per channel ppr / (128 / 64 / 32) Max. repeatability Sample rate khz System propagation delay µs Current consumption without load (typical) ma Min. ohmic load at output kohm 5 5 Max. capacitive load at output nf 1 1 Reverse polarity protection of power supply no no Electrical connection ribbon cable ribbon cable Cross section of single wires mm² 0.09 (AWG28) 0.09 (AWG28) Redundancy feasible no no Table Version C Additional features High operating speed Additional options Operating temperature C Incremental resolution 128 / 64 or 32ppr programmable (Standard 256ppr)

5 Power supply voltage 2 Standard: 5VDC Output signal 6 Standard: SSI 7 Standard: Incremental A,B,Z Ordering code Version C Vert-X Output characteristics 1 Standard: Positive gradient CW 2 Optional: Positive gradient CCW (only SSI) Electrical connection 1 Standard: Ribbon cable 6pol 9 Optional: Special cable; special wires Length of wires / ribbon cable 01 Optional: 10cm 02 Standard: 20cm 03 Optional: 30cm 04 Optional: 40cm 05 Optional: 50cm 99 Optional: Special length Electrical angle 36 Standard: Electrical angle 360 Sensor principle 6 C Mechanical version 1601 Standard: 6mm shaft D-shape ; IP Standard: 6mm shaft D-shape ; IP Optional: Special shaft

6

Vert-X 37-5V. Applications Agricultural machines Construction machines Forest machines Special purpose vehicles

Vert-X 37-5V. Applications Agricultural machines Construction machines Forest machines Special purpose vehicles Version A B C Electrical Data Measuring range 0... 360 0... 360 360 Linearity see table A see table B see table C Max. hysteresis see table A see table B see table C Resolution see table A see table B

More information

Vert-X 31E 24V. Applications Concrete pump Access control system Fork lift

Vert-X 31E 24V. Applications Concrete pump Access control system Fork lift C Electrical Data Measuring range 0... 360 360 Linearity see table B see table C Max. hysteresis see table B see table C Resolution see table B see table C Max. repeatability see table B see table C Sample

More information

Vert-X 28HD - 24V / V. Applications Harvester Public transport Construction machines

Vert-X 28HD - 24V / V. Applications Harvester Public transport Construction machines Sensor principle MH-C MH-C2 Electrical data Measuring range 0...360 - Indep. linearity % of meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz

More information

Vert-X 22E - 5V / PWM. Applications Wind vanes Valve control Level sensor Special purpose vehicles

Vert-X 22E - 5V / PWM. Applications Wind vanes Valve control Level sensor Special purpose vehicles Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearitiy (without misalignment) % of meas. range ±0.3 - Indep. linearitiy (with allowed misalignment @ 360 ) % of meas. range

More information

Vert-X 22E - 5V / % Ub. Applications Wind vanes Valve control Level sensor Special purpose vehicles

Vert-X 22E - 5V / % Ub. Applications Wind vanes Valve control Level sensor Special purpose vehicles Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearitiy (without misalignment) % of meas. range ±0.3 ±0.3 Indep. linearitiy (with allowed misalignment @ 360 ) %

More information

Vert-X 22E - 24V / 4-20mA. Applications Wind vanes Valve control Level sensor Special purpose vehicles

Vert-X 22E - 24V / 4-20mA. Applications Wind vanes Valve control Level sensor Special purpose vehicles Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearitiy (without misalignment) % of meas. range ±0.3 ±0.3 Indep. linearitiy (with allowed misalignment @ 360 ) %

More information

Vert-X 27E - 5V / % Ub. Applications Harvesting machine Fork lift Hydraulic pump

Vert-X 27E - 5V / % Ub. Applications Harvesting machine Fork lift Hydraulic pump Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearitiy (without misalignment) % of meas. range ±0.3 ±0.3 Indep. linearitiy (with allowed misalignment @ 360 ) %

More information

Vert-X 27E - 24V / SPI. Applications Harvesting machine Fork lift Hydraulic pump

Vert-X 27E - 24V / SPI. Applications Harvesting machine Fork lift Hydraulic pump Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearitiy (without misalignment) % of meas. range ±0.3 - Indep. linearitiy (with allowed misalignment @ 360 ) % of meas. range

More information

Vert-X 27E - 24V / 4-20mA. Applications Harvesting machine Fork lift Hydraulic pump

Vert-X 27E - 24V / 4-20mA. Applications Harvesting machine Fork lift Hydraulic pump Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearitiy (without misalignment) % of meas. range ±0.3 ±0.3 Indep. linearitiy (with allowed misalignment @ 360 ) %

More information

Vert-X 37E - 5V / % Ub. Applications Agricultural machines Construction machines Forest machines Special purpose vehicles

Vert-X 37E - 5V / % Ub. Applications Agricultural machines Construction machines Forest machines Special purpose vehicles Sensor principle Electrical data Measuring range 0... 360 0... 360 Indep. linearitiy (without misalignment) % of meas. range ±0.3 ±0.3 Indep. linearitiy (with allowed misalignment @ 360 ) % of meas. range

More information

Vert-X 31E - 24V / SPI. Applications Concrete pump Access control system Fork lift

Vert-X 31E - 24V / SPI. Applications Concrete pump Access control system Fork lift Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearity (typ.) % of meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 14 - Max. repeatability 0.1 - Sample rate fast

More information

Vert-X 31E - 5V / % Ub. Applications Concrete pump Access control system Fork lift

Vert-X 31E - 5V / % Ub. Applications Concrete pump Access control system Fork lift Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearity (typ.) % of meas. range ±0.3 ±0.3 Max. hysteresis 0.1 0.1 Resolution bit 12 14 Max. repeatability 0.1 0.1

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800 NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection

More information

NOVOHALL Rotary Sensor touchless technology transmissive. Series RFC4800 analog

NOVOHALL Rotary Sensor touchless technology transmissive. Series RFC4800 analog NOVOHALL Rotary Sensor touchless technology transmissive Series RFC4800 analog The RFC 4800 utilizes a separate magnet or magnetic position marker, attached to the rotating shaft to be measured. The orientation

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,

More information

NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800

NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800 NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:

More information

high grade, temperature resistant plastic, Thermoplast with brass inserts

high grade, temperature resistant plastic, Thermoplast with brass inserts NOVOHALL Rotary Sensor touchless technology transmissive Series RFD-4000 Special features fully touchless - no shaft or seals to wear measure directly through any non-ferromagnetic material electrical

More information

high grade, temperature resistant plastic, Thermoplast with brass inserts

high grade, temperature resistant plastic, Thermoplast with brass inserts NOVOHALL Rotary Sensor touchless technology transmissive Series RFD4000 analog Special features fully touchless - no shaft or seals to wear measure directly through any non-ferromagnetic material electrical

More information

Rotational Position Sensor, Kit Type, Hall Effect Technology

Rotational Position Sensor, Kit Type, Hall Effect Technology Rotational Position Sensor, Kit Type, Hall Effect Technology QUICK REFERENCE DATA Sensor type Kit rotational, hall effect Output type Wires Market appliance Industrial Dimensions 48 mm x 43 mm x 12 mm

More information

Data Sheet for Angle Sensors

Data Sheet for Angle Sensors ETA25PM - R ETA25PM - F ETA25PM - TS 10 to 100-times longer life compared with multiturn potentiometers Free user programmable start and end position (electrical angle 10 up to 72000 ) Simple user programming

More information

NOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900

NOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900 NOVOHALL Rotary Sensor touchless transmissive Series RFX-6900 Special features Very robust design to extreme environmental conditions Touchless hall technology Electrical range up to 360, in single and

More information

Throttle Position Sensor in Hall Effect Technology Hollow and D-Shaft Versions

Throttle Position Sensor in Hall Effect Technology Hollow and D-Shaft Versions Throttle Position Sensor in Hall Effect Technology Hollow and D-Shaft Versions QUICK REFERENCE DATA Sensor type ROTATIONAL, single turn hall effect Output type Wires Market appliance Industrial Dimensions

More information

NOVOHALL Rotary Sensor non-contacting. Series RSX-7900

NOVOHALL Rotary Sensor non-contacting. Series RSX-7900 NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in

More information

Single Turn Servo Mount Hall Effect Sensor in Size 05 (12.7 mm)

Single Turn Servo Mount Hall Effect Sensor in Size 05 (12.7 mm) Single Turn Servo Mount Hall Effect Sensor in Size 05 (12.7 mm QUICK REFERENCE DATA Sensor type ROTATIONAL, single turn hall effect Output type Wires Market appliance Professional Dimensions ½" (12.7 mm

More information

Throttle Position Sensor in Hall Effect Technology Hollow and D-Shaft Versions

Throttle Position Sensor in Hall Effect Technology Hollow and D-Shaft Versions Model 981 HE Throttle Position Sensor in Hall Effect Technology FEATURES Accurate linearity down to: ± 0.5 % Easy mounting principle Non contacting technology: Hall effect Model dedicated to all applications

More information

NPN PNP NPN PNP NPN PNP

NPN PNP NPN PNP NPN PNP Cam Positioner Low-Cost, High-Performance Electronic Cam Switch for Use with OMRON E6F Rotary Encoder Control outputs can be programmed to turn ON/OFF in 1 units of rotary encoder shaft rotation Handles

More information

Rotary Measuring Technology

Rotary Measuring Technology Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation:

More information

Vdc 9 to 30 (unregulated) and 5 ±0.5 (regulated) Supply voltage

Vdc 9 to 30 (unregulated) and 5 ±0.5 (regulated) Supply voltage NRH280DP dual output no contact rotary sensor PERFORMANCE Measurement range 20 to 360 in 1 increments Supply voltage 9 to 30 (unregulated) and 5 ±0.5 (regulated) Over voltage protection Up to 40 (-40 to

More information

Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm)

Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) Ten Turns Servo or Bushing Mount Hall Effect Sensor in Size 09 (22.2 mm) ELECTRICAL SPECIFICATIONS FEATURES All electrical angles available up to: 3600 Accurate linearity down to: ± 0.5 % Very long life:

More information

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

More information

Multiturn Sensor non-contacting. Series RSM2800 analogue. Preliminary data sheet

Multiturn Sensor non-contacting. Series RSM2800 analogue. Preliminary data sheet Multiturn Sensor non-contacting Series RSM2800 analogue Preliminary data sheet Special features non-contacting, magnetic long life electr. angle 720 up to 5760 in 360 -steps available (equates 2... 16

More information

Incremental Encoder Model: FOI58

Incremental Encoder Model: FOI58 Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85

More information

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution

Incremental encoders Redundant sensing, isolated blind hollow shaft ø mm, cone shaft ø17 mm pulses per revolution Features Robust, compact housing Two bearings with large distance, one at each end High shaft load up to 450 N Shock resistant up to 250 g Shaft insulation up to 2.8 kv Highest operating speed 10000 rpm

More information

Rotary Measurement Technology Absolute Encoders, Multiturn

Rotary Measurement Technology Absolute Encoders, Multiturn Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection

More information

Type CP-S, CP-C & CP-A Switch mode

Type CP-S, CP-C & CP-A Switch mode Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting

More information

Wimesure 54, rue de Versailles CHEVREUSE Tél Fax

Wimesure  54, rue de Versailles CHEVREUSE Tél Fax No-contact, Hall-effect technology Wear free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or 9-30V supply options Dual redundant outputs Analog output 0.5-4.5V

More information

Absolute Encoders Singleturn

Absolute Encoders Singleturn The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra

More information

Technical data. General specifications. Measurement range min max. 360

Technical data. General specifications. Measurement range min max. 360 Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling

More information

Connection to the sensor is with simple flying leads for customer termination. 1 Page NRH300DP Rev B 09/15

Connection to the sensor is with simple flying leads for customer termination. 1 Page NRH300DP Rev B 09/15 No-contact, Hall-effect technology Wear free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or 9-30V supply options Dual redundant outputs Analog output 0.5-4.5V

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable

More information

PD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description

PD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer

More information

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80

More information

COMPACT 700 SERIES ENCODERS FOR DRIVES

COMPACT 700 SERIES ENCODERS FOR DRIVES COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be

More information

COMPACT 700 SERIES ENCODERS FOR DRIVES

COMPACT 700 SERIES ENCODERS FOR DRIVES COMPACT 700 SERIES ENCODERS FOR DRIVES Robustness in tight spaces An encoder is mounted at the rear of a motor and therefore affects the motor s overall length. In tight spaces, the build length can be

More information

Rotary Measuring Technology

Rotary Measuring Technology SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,

More information

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6. IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration

More information

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:

More information

Absolute encoders - SSI

Absolute encoders - SSI with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN

More information

Data Sheet for Precision Potentiometer

Data Sheet for Precision Potentiometer Electrical Data 3turn 5turn 1turn Effective electrical angle of rotation 1.) 18 ±5 18 ±5 36 ±5 Total resistance 1.) 2 Ohm..5 kohm 2 Ohm..1 kohm Resistance tolerance ±3% (±1%) Independent linearity (best

More information

38 Series - Relay interface modules A

38 Series - Relay interface modules A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays

More information

38 Series - Relay interface modules A

38 Series - Relay interface modules A 38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC

More information

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS Online data sheet ACM36-L1K0-K01 ACS/ACM36 ACM36-L1K0-K01 ACS/ACM36 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number

More information

ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG

ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features

More information

Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit

Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit Magnetic absolute encoder GEL 2035 Serial interface (SSI), 24 Bit Technical information Version 03.09 Resolution: Precision: 0.8 Signal pattern: Singleturn (ST): Multiturn (MT): up to 24 Bit SSI and SSI

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just

More information

RM36. Rotation sensors RM36 Absolute rotary encoder

RM36. Rotation sensors RM36 Absolute rotary encoder Rotation sensors RM36 Absolute rotary encoder RM36 Description The RM36 is a high-speed magnetic rotary encoder designed for use in harsh industrial environments. The non-contact two-part design removes

More information

Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT

Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,

More information

T10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en

T10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en T10F Torque Flange Data Sheet Special features Extremely short design High permissible dynamic loads High permissible transverse forces and bending moments Very high torsional stiffness Contactless Selectable

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional

More information

DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.

DSA150 Series. xxx Series. 150 Watts.   AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125. 15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty

More information

Electronic timer CT-TGD.22

Electronic timer CT-TGD.22 2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection

More information

PRELIMINARY. current/ phase

PRELIMINARY. current/ phase date 03/20/2018 page 1 of 6 SERIES: NEMA11-AMT112S DESCRIPTION: STEPPER MOTOR W/ INCREMENTAL ENCODER FEATURES CUI AMT112S encoder + LIN Engineering stepper motor small, compact NEMA 11 frame size up to

More information

Datasheet. messtechnik gmbh. Torque ranges from 0,5 to 1000 Nm. Features. Extra Features DRBK-A. Torque Transducer DRBK + DRBK-A

Datasheet. messtechnik gmbh. Torque ranges from 0,5 to 1000 Nm. Features. Extra Features DRBK-A. Torque Transducer DRBK + DRBK-A messtechnik gmbh tel. +49 (0)79 72 93 10-0 hagstrasse 10. D-74417 gschwend vertrieb@eth-messtechnik.de Datasheet Torque Transducer DRBK + DRBK- Torque ranges from 0,5 to 1000 Nm Features Very short Broad

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional

More information

Magnetic Encoder MEM 22

Magnetic Encoder MEM 22 Description The MEM 22 is a magnetic incremental encoder. He is a reliable low cost hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder MEM22 is designed

More information

Measurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )

Measurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( ) Magnetic Angle Sensor with Analog Output Magnetic Angle Sensor 0-360 Measurement range 0-360 Protection class IP67 Analog output Compact, low profile housing Non-contact with external position magnet Wear

More information

Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )

Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( ) PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external

More information

Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W

Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

T40B. Torque Flange. Special features. Data sheet. Overall concept

T40B. Torque Flange. Special features. Data sheet. Overall concept T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI

DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for

More information

Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING. Technical leaflet

Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING. Technical leaflet Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 RD.5G.H4.02 Danfoss A/S (IC-MC/mr), 09-2004 Introduction AKS 32 and AKS 33 are pressure transmitters that

More information

DTM.OCS.S/N - Modbus Level Transmitter

DTM.OCS.S/N - Modbus Level Transmitter Digital Submersible Level Transmitter with Modbus Interface DTM.OCS.S/N - Modbus Level Transmitter CUSTOMER BENEFITS High precision digital level transmitter with standard Modbus interface Fast customization

More information

T22. Torque transducer. Special features. Data sheet

T22. Torque transducer. Special features. Data sheet T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring

More information

Multi-voltage Multi-function. Wiring diagram (without control signal)

Multi-voltage Multi-function. Wiring diagram (without control signal) 80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of

More information

Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )

Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( ) PRAS1 Magnetic Angle Sensor with Analog Output Magnetic angle 0-360 in M12 housing Measurement range 0 to 360 Protection class IP67 / IP69K Analog output Stainless steel housing Non-contact with external

More information

Penny & Giles No-Contact, Rotary Position Sensor NRH271 & NRH272

Penny & Giles No-Contact, Rotary Position Sensor NRH271 & NRH272 Penny & Giles No-Contact, Rotary Position Sensor NRH271 & NRH272 No-Contact Hall-effect technology Wear-Free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or

More information

Power supply CP-E 24/0.75

Power supply CP-E 24/0.75 2CDC 271 016 F0t06 a OUTPUT L+, L : terminals output b INPUT L, N, PE: terminals input c LOW: red LED output voltage too low d OK: green LED output voltage OK e OUTPUT Adjust: rotary potentiometer output

More information

Product Data Sheet 8452/2HHP. The engineer's choice

Product Data Sheet 8452/2HHP. The engineer's choice Product Data Sheet 8452/2HHP The engineer's choice 8452/2HHP INDEX 1 General... 3 2 Mechanics... 3 2.1 General... 3 2.2 Connections... 3 3 Operating Data... 5 3.1 Electrical Interface - Input... 5 3.2

More information

3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching

3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching Main Characteristics: Zero-point switching LED display Various connection technologies Plug-in control terminal Degree of protection IP 2 Insulated mounting foot Standards / Approvals: DIN EN 697--3 UL

More information

MIG Encoders BEGE MIG NOVA+ Your drive, our (trans)mission. BEGE Power Transmission

MIG Encoders BEGE MIG NOVA+ Your drive, our (trans)mission. BEGE Power Transmission MIG Encoders BEGE MIG NOVA+ BEGE Power Transmission Anton Philipsweg 30 2171 KX Sassenheim The Netherlands T: +31 252-220 220 E: bege@bege.nl W: www.bege.nl Your drive, our (trans)mission Mounting a conventional

More information

Express Delivery. Axial. Connection

Express Delivery. Axial. Connection HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

More information

08/07/2015

08/07/2015 17.5 mm - 1 Solid State Relay 0.7A MUS2 Part number 88827004 Multi-function or mono-function Multi-range Multi-voltage Screw or spring terminals LED status indicator (relay version) Possibility of external

More information

Switching Power Supply Type SPP1 60W Enclosed type

Switching Power Supply Type SPP1 60W Enclosed type Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and

More information

CP-T range Product group picture

CP-T range Product group picture Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details

More information

Data Sheet for Angle Sensors

Data Sheet for Angle Sensors Up to 1024 pulses / 360 2 channels + index pulse Outputs TTL-compatible or as option linedriver Supply voltage 5 VDC Fast and simple to install, less than 19mm installation depth Upper limit frequency

More information

83 Series - Modular timers 16 A. Features

83 Series - Modular timers 16 A. Features Features 83 Series - Modular timers 16 A 83.11 Multi-function and mono-function timer range - Multi-function & multi-voltage 83.11 - delay, multi-voltage 22.5 mm wide Six time scales from 0.1s to 20h High

More information

Power supply CP-E 24/2.5

Power supply CP-E 24/2.5 2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment

More information

CP-E range Benefits and advantages

CP-E range Benefits and advantages Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A

More information

MHAD 50 - HDmag. Features

MHAD 50 - HDmag. Features Magnetic sensing, hollow shaft 30 mm MHAD 50 with cable Features Absolute encoder with magnetic sensing and without bearings Absolute resolution max. 16 bit singleturn Additional incremental signals Robust

More information

MAGNETIC 2000 SERIES BEARINGLESS ENCODERS FOR LARGE SHAFTS

MAGNETIC 2000 SERIES BEARINGLESS ENCODERS FOR LARGE SHAFTS MAGNETIC 2000 SERIES BEARINGLESS ENCODERS FOR LARGE SHAFTS Low-maintenance for large shafts Certain motors benefit from having the speed feedback sensor mounted directly on the main shaft. A bearingless

More information

38 Series - Relay interface modules A. Features /

38 Series - Relay interface modules A. Features / Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions

More information

Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles Life cycle of bearings

Clamps, mounting plate EN :1993, 100 g/11 ms, 100 shocks EN :1995, 20 g 10 Hz-2 khz, 10 cycles Life cycle of bearings PRAS3 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 in a 36 mm dia. housing Measurement range 0-360 + Protection class IP67 / IP69K Analog output With 10 mm shaft or 6 mm hollow

More information

M5800 Pressure Transducer with Rotatable Display

M5800 Pressure Transducer with Rotatable Display Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations Optional Stainless Steel Snubber CE Compliant

More information

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,

More information