Time Switches. Because we have a Responsibility

Transcription

1 TIME SWITCHES

2 Time Switches On 8th August 1958, a young entrepreneur manufactured, India's first indigenously developed, sheet steel enclosed rewirable switch at Jalandhar in Punjab, marking the birth of Indo Asian. Nearly Half a century later, Indo Asian has a proven track record of manufacturing and marketing a wide range of high quality electrical control & protection products, which include electrical safety devices such as Indo Kopp MCBs, Stopshock RCCBs, HRC Fuselinks, Indo Asian Wires & Cables, Insulated Industrial Plugs & Sockets, Hausmann Modular Wiring Accessories and of course ecofriendly energy saving Compact Fluorescent Lamps. Because we have a Responsibility Indo Asian's product portfolio reflects its philosophy of social responsibility. At Indo Asian, on one hand we manufacture devices which make the use of electricity safe & convenient, on the other hand, ecofriendly energy saving Compact Fluoresent Lamps conserve scarce electrical power. Indo Asian has installed the largest integrated and automated CFL manufacturing setup in south East Asia to produce a wide range of Smart Compact Fluorescent Lamps which are used in homes, offices, hotels, entertainment arenas, shopping arcades, public areas, housing colonies etc. enabling these users to conserve nearly 80% electrical energy conventionally used for lighting. Thus addressing a crucial need of the nation. The Technology Edge The group's pursuit of excellence backed by extensive inhouse R&D, technical and commercial collaborations with world's best renowned companies such as Heinrich Kopp AG, Doepke & Co. AG., and Theben AG Werke Zeitautamatic GmbH, all from Germany and ETI Elektorelement d.d. of Slovenia of all have resulted in bringing world class products from all the 5 modern and state-of-the art manufacturing units of Sonepat, Jalandhar, Noida and Parwanoo.

3 Time Switches Theben The abilities of Theben AG lies in solutions for time, lighting and climate control. Within time switching devices, modules or bussystems, Theben produces the highest quality products in every range. Theben offers not only time switches in analog and digital technology with classical switch tappets or segments, but also microprocessor-controlled digital devices that offer hours, days, weeks and years programs and an extensive program of sensors and actuators for the EIB bus technology. On top of this Theben is well known for its stair, light and twillight switches and for its clock thermostats that allow a power saving heating control. Theben offers its clients a tailored solution for all applications and situations. Theben AG manufacturing plants in Germany, Great Britain, France, Italy and Switzerland and is one of the leading producers of time switching devices and systems. A worldwide presence in more than 54 countries with market leading high-quality products form the basis for continual growth. Theben products are very well-known for their user-firendly operation, a high product quality and a first rate design. In India the complete range of Theben products are made available from "Indoasian Fusegear Ltd. The company is certified according to the international DIN ISO 9001 standardisation. The Philosophy We are an autonomous, independent, internationally operation company with a high potential of innovation and a great many profitable ideas and concepts for the future. Our core competency encompasses the control and regulation of time, light and climate. We are recognized specialists, especially when it comes to timer devices and other intelligent systems. Our goals are innovation, high functionality, best quality, dependability, continuity and calculability. We are a dependable and competent partner to our customers, offering competitive products and services. The Theben company aims to serve, and continuously supports the personal as well as the occupational qualification and development of its staff members.

4 Analog Time Switches SUL-189 s Segment Time Switch Function : Time switches with or without power reserve. 24 hour dial with segment of 15 min. Switching time each. Early ON/OFF over-ride switching without influencing the subsequent program sequence. Permanent ON/OFF switching, e.g. for holidays. Changeover contact 10A/250V~. Switching status indication. Clock hands can be reset for switching over between summer/winter time. Technical Data : Nominal voltage : 230 V ~±10% Power Consumption : Max. 2.5 VA. Permissible ambient temperature : -10ºC..+50ºC Time setting : analog with clock hands, also possible anticlockwise. Contact : Floating, gap less than 3 mm (µ). Contact material : Hard silver, gold-plated. Switching Capacity : 10A/250 V ~, cos =1 2A/250 V ~, cos =0.6. Housing and insulating material : high temperature-resistant, fireproof thermoplastics. Electrical Connection : screw terminal or 4.8 mm tab connectors. Protection class : II in accordance with EN if installed as directed. Quartz time switch with power reserve Drive : quartzcontrolled stepping motor. Mains frequency : Hz. Accuracy : ± 1 Sec./day at 20ºC. Power reserve : Approx. 72 hours on fully charge battery at 20ºC Full power reserve : approx. 3 days after connection to operating voltage. Weight : Approx. 260g. Design : Front frame 72 x 72 mm Switch panel mounting with clip fastening. Connection either with tab connectors (4.8mm) or with screw terminals using the plug-in base. Surface mounting with plug-in base and terminal cover. Can also be mounted on a 35 mm top-hat rail with additional parts or on PC boards with plug connector. Transparent cover protects against dirt and unintentional adjustment Type Program Power reserve Switching Programmable Minimum Switching Nominal Order No. dial approx. segments every... switching interval contacts current at 250~ SUL 189 s 24 hours 3 days min. 15 min. 1Changeover Switch 10 (2) A T

5 Analog Time Switches SUL 181 h Segment Time Switch Function : Time switches with power reserve. 24 hour dial with 30 min. segments or 60 min dial with 75s segments. Early manual over-ride switching for on and off without influencing the subsequent program sequence. Permanent ON/OFF switch. Switching status indication. Fine adjustment for time setting accurate to the minute. Summer/winter time correction ± 1 hour by the bi-directional fine time adjustment facility. Operating indication. TECHNICAL DATA : Nominal voltage : 230V ~ ± 10% Permissible ambient temperature : - 20ºC ºC. Power Consumption : Max. 2.5 VA. Contact : Floating, gap less than 3 mm (µ). Contact material : Hard silver. Housing and insulating material: High temperature-resistant, fireproof thermoplastics. Enclosure type : IP 20 in accordance with EN Protection class : II in accordance with EN if installed as directed. Test Approvals : national and international depending on device type. Quartz time switches with power reserve : Drive : quartz-controlled stepping motor. Mains frequency : Hz. Accuracy : = ± 1 sec./day at 20ºC. Power reserve : upto 72hours on fully charged battery. Weight : approx. 150g. DESIGN : Standard housing 45x54x60(mm). Snap-on fixing for 35mm top-hat rail (DIN EN 50022). Surface-mounting with additional terminal cover, tamper proofing. Tamper proof operating panel protects against undesired programming interventions. Shock protection in accordance with accident prevention regulation VBG 4. Captive terminal screws * * L N M ~ Type Program Power reserve Switching Programmable Minimum Switching Nominal Order No. dial approx. segments every... switching interval contacts current at 250~ SUL 181 h 24 hours 3 d min. 30min. 1 Changeover 16 (4)A T Switch

6 Analog Time Switches SUL 180 a Segment Time Switch Function : Time switches with 24 h or 7 day segment dial. Programming by 15 minutes segments in the day program. Programming by 2 hours segments in the week program. Technical Data : Nominal voltage : 230V ~ ± 10% Frequency : Hz Power Consumption : Approx. 2, 5VA Contact : Floating, gap less than 3 mm (µ). Contact material : Ag Cd O Permanent ON/OFF switch. Normally open contact 16A/250V~ Switching status indication Switching Capacity : 16A 250 V ~, cos =1 4A, 250 V ~, cos =0.6. Accuracy : = ± 1 sec. /day at 20ºC. Power reserve : approx. 3 days at 20ºC Permissible ambient temperature : -10ºC...+50ºC Housing and insulating material : high temperature-resistant, fireproof thermoplastic. Test approvals : national and international depending on device type. Protection class : II in accordance with EN if installed as directed. Weight : approx. 120 g. Design : Standard housing 45 x 17,5 x 60 (mm) Snap-on fixing for 35 mm top-hat rail (EN 50022) Tamper proof transparent cover protects against undesired programming interventions. Shock protection in accordance with accident prevention regulation VBG 4. Captive terminal screws * * 55.5* L N M ~ Type Program Power reserve Switching Programmable Minimum Switching Nominal Order No. dial approx. segments every... switching interval contacts current at 250~ SUL 180a 24 hours 3 d 96 1/4 hour 1/4 hour 1 Working 16(4)A T Contract

7 Motion Detector LU Motion Detector Function : Technical Data : Detection angle : 180º Motion detector for mounting on exterior house wall or corner. Distance : 14 m max. depending on the adjustment of the sensor, on the surrounding temperature and on the direction of approach. Detector functioning by passive infrared technology. Reacts to the temperature variations resulting from moving bodies, cars etc. For increased safety and convenience around the home. Automatic switch-on off connected lighting when detection area is entered and delayed switch-off when area is left. Switching capacity : 10A/230 V~. Incandescent lamps : upto 2400 W. Halogen lamps : upto 2400 W. Fluorescent lamps : upto 500 W. Dimensions : 68 x 68 x 122 mm Suitable for controlling lighting in house and garage entrances, hall, stairs, garden, storage rooms etc. Energy saving because the lamps automatically switch off after a predetermined time (adjustable timing). Integral photoelectric cell preventing switching on during daylight. Timing is restarted every time a motion is detected. Quick installation and adjustment. White housing. L N LS 180º L N Type Detection Mounting Brightness Time Range Switching contacts Nominal Current Angle Height Range LU º Min 2m lux 5 sec...12 min. 10A, 230 V~ Max 14m. Caution : the detection range and quality depends on ambient temperature and the axis in which the movement takes place in relation to the product. The range is greater when the movement is across the field of view of the sensor rather than directly towards it.

8 Digital Time Switches Digital Timers Switch TR 610 Top / TP 612 Top/TR 611 Top By means of text-oriented operator guidance you are escorted step by step through the entire programming. Function : Technical specifications : Rated voltage : V~+6%-10% Frequency : 50-60Hz Own consumption : max. 6 VA Day/Week Program Contact : zero-potential, break gap less than 3 mm ( ) TR 610 Top TR 608 Top Operator guidance by an integrated LCD display Programming is shown graphically by a means of a bar chart on the LCD display Preset ex-works-time (CET) and automatic summer/winter time changeover Summer/Winter time changeover can be alternatively switched off or randomly programmed (GB, USA changeover norm selectable) High number of memory locations Guided copying of the switching times to other days of the week (random block formation) Sorting of the switching times in memory by the day of the week Switching preselection Permanent switching Lithium battery and EEPROM TR 622 top TERMINA 2 channels with 42 memory locations Holiday switching, random function and pulse program separate for each channel. Cycle program for channel 1. Contact material : Ag Sn O 2 Switching power : 16A, 250V~, cos =1; 10A, 250V~, cos =0.6. Incandescent lamp load : 2300W Halogen lamp load : 2300W Fluorescent lamps : non compensated, series comp. 1000W, parallel comp. 400 W (42f) Compact fluorescent lamps : 9x7 W, 7x11W, 7x15w, 7x20W, 7x23W Timing basis : quartz Working precision : <± 1 sec./day at 20ºC Shortest switching time : 1 minute (pulse/cycle 1 sec.) Switching precision : exact to the second Display : LCD display with text line Operating control elements : 4 touch keys and 1 reset key Power reserve : approx. 4 years with display with full controllability (temp. 20ºC) by means of an environmentally friendly lithium battery Permissible ambient temperature : -10ºC...+50ºC Enclosure and insulating material : high-temperature resistant, self-extinguishing thermoplastics Protection class : II in compliance with EN if installed as directed Degree of protection : IP 20 in compliance with EN Test approval : Weight : appox. 170 g Design : Standard enclosure 45 x (mm) Quick fastening facility for 35 mm DIN rail (EN ) Built-on installation with an additional terminal cover which can be fitted with a leadable seal Switch panel installation complete with installation kit No Captive hinged cover which can be fitted with a leadable seal.

9 Digital Time Switches Overview of the menu levels TR 611/622 top TR 610/612 top * only TR 611/622 top * only TR 622 top Type Program Memory Power reserve Programmable LCD Switch Rated Current Ordering No. Location (Lithium) every... backlit Contacts at 259V~ TR 608 top 24h 28 3 years 1 min - 1 changeover 16(6)A T channel 7d switch TR 610 top 24h years 1min. - 1 changeover 16(10)A T channel 7 days Switch TR 612 top 24h/7 days years 1 min. - 2 changeover 16(10)A T channel 7random days switches switching, holiday TR 611 top years 1 min. yes 1 changeover 1 channel program, switch 16(10)A T pulse and cycle TR 622 top years 1 min. yes 2 changeover 16(10)A T program 2 channels switches Terminal cover for built-on installation, can be fitted with a leaded seal

10 Analog Time Switches SEL 170 top Selekta Technical data : Function : Nominal voltage : V, +10%/-15% Solar 1-channel weekly clock with top operating philosophy, i.e. simplest possible operation through text-oriented programming Frequency : 50-60Hz Power consumption : max, 6VA Precise calculation of sunrise and sunset times through inputting date, time and location coordinates (longitude and latitude) Power reserve : approx. 10 years at full operability (temp. 20ºC) through pro-environmental lithium cell SEL 170 Top Alternatively, the location coordinates can be specified via a country-specific and preprogrammed list of cities. The switching on and off of the connected consumer depends on the sunrise and sunset times and can be offset forwards or backwards for fine adjustment by up to 120 minutes Contact : Floating changeover contact Gap : less than 3 mm ( ) Contact material : Ag Sn O2 Resistive switching capacity : 16A, 250V, cos =1 Factory-set date and time Text-based programming in 4 easy steps, supported by self-explanatory symbols. Energy-saving night switch-off with simple programmable weekly program Inductive switching capacity : 10A, 250V, cos =0.6 Incandescent lamp load : 2300 W Halogen lamp load : 2300 W Semi-automatic function (e.g. light on during evenings, night switch-off at 2300 hrs) Uncorrected fluorescent lamp : 1000VA Guided copying of switching times to other weekdays (block formation). The daily switching times are graphically illustrated by a segment bar in the LCD Date-controlled holiday program Continuous Switching (continuous on or continuous off) Series corrected fluorescent lamps : 1000VA Parallel-corrected fluorescent lamps : 400VA(42 f) Lead-lag (duo) fluorescent lamps : 1000VA Uncorrected mercury discharge lamp : 4 x 125W, 2x250W, 1 x 400W, 1x700W switching pre selection An external input S enables the output to be switched via a control signal (e.g. manual switch) Parallel-corrected mercury discharge lamp : 6x50W (7f), 4x125W (10f), 2x 250W (18f), 1x400W (25f), 1x700 W (40f). Uncorrected sodium discharge lamp : 2x250W, 1 x 400 W In code, 10 year power reserve Automatic summer/winter time correction, can be disabled or freely selected (Europe, GB, USA/CAN changeover rule also selectable) Flexible alternative to twilight switch (brightness sensor does not need to be wired) Parallel compensated sodium discharge lamp : 2x250W (20f), 1x250W (32f), 1x400W (45f) Compact fluorescent lamps : (Capacitive ballast) 1000 VA, (Electronic ballast) 9 x 7W, 7X11W, 7x15W, 7x20W, 7x23W Time based on : Quartz Switching time guaranteed through EEPROM Time accuracy : <± 1s/day at 20ºC Shortest switching time : 1 minute Switching accuracy : to the second Display : LCD with text line Control elements : 4 touch control key s and 1 reset key Permitted ambient temperature : -10ºC...+50ºC Protection rating : IP 20 to En Protection class : II to EN for designated installation Weight : approx. 170g

11 Analog Time Switches SELEKTA 170 top-solar Timer The SELEKTA 170 top, Theben's 35mm wide astronomic timer is an ingeniously simple to operate control unit based on the established TERMINA top operating concept. The special features of an astronomic timer are the precisely calculated sunrise and sunset imes. This ability to calculate switching times so precisely makes the SELEKTA 170 top the ideal solution for illuminating roads, squares, courtyard approahces, display windows and corporate logos. Design Standard housing 45x35x60 mm to DIN Quick fastening for 35mm profile rail (DIN EN ) Contact protection to comply with accident prevention regulation BVGA2 (VBG 4) Top mounting with additional terminal box cover plate, sealable (No ) Control panel installation with assembly kit (No ) Captive cover flap, sealable Lighting control system with SELEKTA 170 top Lux (brightness) Calculated time for sunrise and/or sunset (Astro Time) Sunset Sunrise Individually programmed times for night switching Night switch-off Type Program Power reserve Programmable Special Switching Nominal Order No. (Lithium) every... Function Contacts Voltage at 250 V~ SEL 170 top Astro program 10 Years 1 minute Local 1 changeover 16(10)A T Weekly program database switch Terminal box cover plate for top mounting, sealable SEL 173 DCF Astronomical year 1.5 years 1 minute Holiday or weekend 2 changeover 16(10) A T programm, 24h/7 days/years switching channel change switch (without antenna and power unit) Antenna for DCF77 radio signal, makes DCF77 time synchronisation possible. Power supply is integrated in the device. T Programming set OBELISK (chip card, intermediate plug for PC interface, Software) T OBELISK memory board (separately) T

12 Twilight Switches LUNA LU Star Series LUNA Functions : Technical Data : Nominal voltage : 230~, ±10% Twilight switch in a modern, innovative design Integral light sensor with a very large light-entry angle (approx. 180º) and specially formed lens Immediate LED display of switching status Variable ON/OFF delay settings of approx s, LUNA 129 star-time: 0-180s, LUNA 126 star: 40s fixed setting Test button for checking the installation, independent of brightness setting (except LUNA 126 star) Infinitely variable brightness range of approx lux (model dependent). Preset brightness value of approx. 15 lux as delivered (LUNA 127 star and LUNA 129 star-time) High quality relay ensures safe, secure switching of lamp loads. Frequency : 50Hz Power consumption : Approx. 3.5 VA, 2 VA(LUNA 129) Contact : not floating, gap less than 3 mm ( ) Contact material : Ag Sn O2 Switching capacity : 16A/230V~, cos =1, 10A/230V~, cos =0.6 LUNA 126 star : 10A/230V~, cos =1 6A/230V~, cos =0.6 Glow lamp load : 2300W (LUNA 126 star : 1000W) Halogen lamp load : 2300W (LUNA 126 star : 1000W) Fluorescent lamps : Uncorrected/series-corrected : 2300VA (LUNA 126 star: 1000VA) Parallel-corrected : 400 VA(42f) (LUNA 126 star; 120 VA(18f) Lead-lag circuit (duo) : 1200VA (LUNA 126 star: 400VA) Mercury vapor lamps : Uncorrected/series-corrected : 1000VA Parallel-corrected : 250VA(40f) (LUNA 126 star: use contactor) Sodium vapor lamps : Uncorrected/series-corrected: 1000VA Parallel-corected : 250VA(37f) (LUNA 126 star: use contactor) Compact flourescent lamps : (Capacitive ballast) 1500 VA (Electronic ballast) 9 x 7 w, 7x11w, 7x15w, 7x20w, 7x23w (LUNA 126 star: (capacitive ballast) 400 VA (Electronic ballast) 4x7W, 3x11W, 3x15W, 3x20W, 3x23W) Light intensity setting : depends on model, see table Switch delay time : depends on model, see table Permissible ambient temperature : -35ºC to +55ºC Protection class: II, when installed in accordance with EN and EN Degree of protection : IP 55 (in accordance with EN 60529), with bottom connection

13 Twilight Switches LUNA Design Generous terminal space for connecting and extending wiring as needed 5 connecting terminals including an extra (PE) terminal (except LUNA 126 star) Compact and unobtrusive housing for exterior installation Splash-proof housing (IP 55) Mast installation possible with standard tubing clamp (no included) Cables can be connected at the bottom or back of device housing (2cables possible) Quick-clamping screws for securing the hinged housing cover 4mm2 connection cross section Housing colour: white Type Brightness Installation Switching delay Switching Nominal Order No. range ON/OFF contacts Current at230 v~ LUNA 126 star Lux infinitely Wall mount or approx. 40 s (fixed) 1 Working contact 10 (6)A T adjustable (linear) mast mount LUNA 127 star Lux infinitely Wall mount or s 1 Working contact 16 (10) A T adjustable (linear) mast mount infinitely adjustable LUNA 128 star Lux infinitely Wall mount or s 1 Working contact 16 (10) A T adjustable (logarithmisch) mast mount infinitely adjustable LUNA 129 star Lux infinitely Wall mount or 0-10 min Working contact 16 (10) A T star-time digital adjustable mast mount digital adjustable

14 Twilight Switches LUNA LU 110 Luna LU 112 Luna Twilight switch for distribution panel installation with separate surface-mounted or built-in light sensor. Switching brightness can be adjusted continuously between approx lux with the adjusting screw immediate indication of the switching status by LED Approx.40 s switch- ON/swiitch-OFFdelay in order to avoid switching errors owing to lightning flashes or car headlamps etc. Twilight switch for distribution panel installation with separate light sensor as above, but: Control unit with range selector switch for 2 brightness ranges: Range 1: approx lux Range 2: approx lux Approx. 40/80s switch-on/switch-off delay in order to avoid switching errors owing to lightning flashes or car headlamps etc. Technical data: Nominal voltage: 230 V~, ±10 % Mains frequency: Hz Power consumption: approx. 2.2 VA LU 113 approx. 2.7 VA Contact: floating, gap less than 3 mm ( ) Contact: material:ag Sn O2 Switching capacity : 10A/250 v~, cos = 1 6A/250 v~, cos = 0.6 incandescent lamp load: 1000 w Halogen lamps: 1000 W (230 V~) Fluorescent lamp: uncompensated/series compensated 800 W parallel compensated 200 W lead-lag circuit (duo) 800 W High-pressure discharge lamps : use power contactor Brightness range : lux on LU lux, lux on LU 110 Switching delay (ON/OFF) : Approx. 80s, Approx. 40s on LU 110 and LU 113 Switching status indication : LED (no delay) Connection cable for light sensor : 2-core cable max. 100m Permissible ambient temperature : control unit : -10ºC...+50ºC light sensor : -40ºC...+70ºC Protection class : II in accordance with EN if installed as directed Degree of protection : in accordance with EN Control unit : IP 20 Surface-mounted light sensor : IP 54 with cable connection at bottom built-in light sensor : IP 65 Test approvals : national and international depending on device type Type Brightness Adjustment Sensor Switching delay Switching Nominal Order No. range ON/OFF contacts current at 250V~ LUNA Lux 1 brightness Surface-mounted 40/40s 1 changeover 10 (6) A range light sensor (IP 54) switch with screw terminals LUNA Lux 1 brightness Built-in light sensor 40/40s 1 changeover 10 (6) A range (IP 65) with 1.5 m cable switch Terminal cover for surface mounting LUNA 110, tamper proofing LUNA Lux 2 brightness Surface-mounted 80/80s 1 changeover 10 (6) A ranges light sensor (IP-54) switch with screw terminals LUNA Lux 2 brightness Built-in light sensor 80/80s 1 changeover 10 (6) A ranges (IP 54) with 1.5m cable switch Terminal cover for surface mounting LUNA 112, plombierbar LUNA Lux 2 brightness Surface-mounted 40/40s 2 changeover 10 (6) A ranges light sensor (IP-54) switch 2 channels with screw terminals max. 10 devices attachable Terminal cover for surface mounting LUNA 113. Built-in light sensor, connection cable 1.5m, Degree of protection IP 65 (spare part), (except LUNA 113) Surface-mounted light sensor with fastening square and screw terminals, (except LUNA 113) Surface-mounted light sensor with fastening square and screw terminals, (only for LUNA 113)

15 Din Rail Programable Logic Controller Din Rail Program Programmable Logic Controller PHARAO-II 14 (AC) Common Functions Programmable controller for commercial and industrial use. 34 pre-programmed function blocks with special control functions that can be used up to 200 times Direct programming of even complex Boolean functions in one function module Programming, editing and modifying on the unit itself via 8 keys without interface cable Backlit LCD with operator guidance in 4x12 character text Input and output switching status display Process variable display (MMI function) Assignment of programmed functions on front key Internal EEPROM memory for max. 200 function blocks (5,000 bytes) Optional plug-in EEPROM for program transfer or dual programming of internal/plugged-in EEPROM 3-level password protection Realtime year clock with 1,000 switching times Graphical programming software for windows 95/98/NT/2000/ME/XP with detailed online help documentation Programming of the function blocks via "drag and drop" Online/offline program simulation on screen Remote control/remote monitoring possible via modem or GSM modem Transmission of SMS, or fax Communication in all directions Communication in all directions Analogue modem Cost efficient remote control and monitoring. Because PHARAO software 2.0 contains the entire set of communication tools, the PC requires only a modem to enable remote configuration, monitoring and programming. GSM Modem Error messages or threshold values in te text can be sent from controller to Fax Machine. Error messages or threshold values in the text can be sent by SMS from controller to mobile telephone. Type Outputs Rated Voltage Range Inputs Input Frequency Order No. PARAO 6 (AC) 2 relays (NO Contact) VAC, +10%/-15%, 4 digital inputs max. 5 Hz T a 8A/250V~ Hz VAC (0.24 ma/240 VAC) PHARAO 10 (AC) 4 relay (NO contact) VAC, +10%/-15%, 6 digital inputs max. 5 Hz T a 8/A250V~ 50-60Hz VAC (0.24 ma/240vac) PHARAO 11 (DC) 4 relays (NO contact) 24 V DC, +20%/-15% 6 analogue/digital eligible inputs max. 20Hz T a 8A/250 V~ 0-10 V DC or 24V DC, sink/source PHARAO 12 (DC) 4 transistor outputs 24 V DC, +20%/-15% 6 analogue eligible inputs max. 20 HZ T a 1A/24 DC 0-10 V DC order 24 V DC, sink/source PHARAO 20 (AC) 8 relays (NO Contact) VAD, +10%/-15% 12 digital inputs max. 5 Hz T a 8A/250V~ 50-60Hz 100V-240VAC (0.24mA/240VAC) PHARAO 21 (DC) 8 relays ( NO Contact) 24V DC, +20%/-15% 12 inputs : 4 digital inputs, max. 20 Hz T a 8A/250V~ 8 inputs alternatively analogue/digital, 0-10V DC or 24V DC, sink/source PHARAO 22 (DC) 8 transistor outputs 24V DC, +20%/-15% 12inputs : 4 digital inputs, max. 20 Hz T a 1A/24 DC 8 inputs alternatively analogue/digital, 0-10V DC or 24V DC, sink/source PHARAO-II 14 (AC) 6 relays (NO contact) VAC, + 10%/-15%, 8 digital inputs max. 20 Hz T a 8A/250V~ Hz PHARAO-II 15 (DC) 6 relays (NO contact) 24V DC, +20%/-15% 8 analogue/digital eligible inputs max. 20 Hz T a 8A/250V~ PHARAO-II 24 (AC) 4 relays a 8A/250V~ VAC, +10%/-15% 15 digital inputs max. 20 Hz T relays a 2A/250V~ 50-60Hz PHARAO-II 25 (DC) 4 relays a 8A/250V~ 24 V DC, +20%/-15% 15 inputs, 8 of them max. 20 Hz T relays a 2A/250V~ analogue/digital eligible inputs PHARAO-II VAC 4 digital inputs max. 20 Hz T Upgrade 4 ED (AC) 50-60Hz PHARAO-II 24V DC, +20%/-15% 4 digital inputs max. 5 Hz T Upgrade 4EDA(DC) PHARAO-II VAC 4 digital outputs 2x1 khz T Upgrade 4AR (AC) 50-60Hz Power unit 24VDC, 36W, 4 TE Luna 131 DDC combination sensor, temperature and brightness sensor for analogue inputs on PHARAO units, 0-10 VDC Pharao programing software, CD for windows 95/98/NT/2000/ME/XP, software for Pharao and Pharao-II generation Programming cable, PC/PHARAO PharaO-II GSM cable T T T T T Plug-in EEPROM, memory module T Plugs-in PHARAO-II EEPROM T Front panel installation kit T

16 Selection Table for Digital and Analog time switches Time Switch & Devices Program Contacts Contacts Minimum Nominal Power Distributor Wall Switch Flush Type distance trippable switching current at reserve panel mounting panel mounting < 3mm ( ) every.. time 250V~ approx. installation install DIGITAL 24h + 7 days Year Program 1s 1s 10A 10 years TR030 Top 1s 1s 16A 10 years TR 611 top 1s 1s 16A 10 years TR 611 top DCF 1s 1s 16A 8 years TR651 S 1min 1min 16A 3 years TR 608 top 1min 1min 16A 10 years TR 610 top 1min 1min 16A 10 years TR 635 top 1s 1s 16A 10 years TR 622 top 1s 1s 16A 8 years TR 652 S 1min 1min 16A 10 years TR 612 top 1min 1min 6A 10 years TR 636 top 1 min 1min 6A 10 years TR 685/2 top 1s 1s 10A 8 years TR 653 S 1s 1s 16A 1.5 years TR 641 S 1s 1s 16A 1.5 years TR 641 S DCF 1s 1s 16A 1.5 years TR 642 S 1s 1s 16A 1.5 years TR 642 S DCF 1s 1s 16A 1.5 years TR 644 S 1s 1s 16A 1.5 years TR 644 S DCF Program Contacts Contacts Minimum Nominal Power Distributor Wall Switch Type distance trippable switching current at reserve panel mounting panel < 3mm ( ) every.. time 250V~ approx. installation install 18.5 s 1.25 min 10 A TM 179 h 60 min 37.5 s 2 min 10 A TM 178 h 75 s 75 s 10 A TM 171 h 15 min 15 min 16 A 3 days SYN 160 a 15 min 15 min 16 A SUL 180 a 15 min 15 min 10 A SYN 169 s 15 min 15 min 10 A 3 days SUL 189 s 15 min 30 min 16 A SYN 168 h 24h 15 min 30 min 16 A 3 days SUL 188 h 30 min 30 min 16 A SYN 161 h 30 min 30 min 16 A 3 days SUL 181 h 5 min 20 min 6 A 150 h SUL 285/1 T 15 min 30 min 10 A SYN 168 g 15 min 30 min 10 A 3 days SUl 188 g 5 min 20 min 6 A 150h SUl 285/2 T 2 h 2 h 16 A 3 days MEM 190 a 1 h 3 h 16 A 3 days MEM 198 h 7 days 5/30 min 20 min/2h 10 A SYN 269 h 5/30 min 20 min/2h 10 A 3 days SUL 289 h 5 min 20 min 6 A 150h SUL 285 /1 TW 24h 5/30 min 20 min/2h 6 A SYN 269 g or 5/30 min 20 min/2h 6 A 3 days SUL 289 g 7 days 5/30 min 20 min/2h 6 A 150h SUL 285/2 TW adjustment 15 min 30 min 10 A 3 days SUL 189 hw 15 min 45 min 10 A SYN 168 hw 24h+2days 15 min 45 min 10 A 3 days SUL 188 hw same daily program on certain weekend especially suitable suitable to a limited extent ANALOG