Radio controlled home automation

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Radio controlled home automation"

Transcription

1 Radio controlled home automation for retro-fit and new projects Hager quicklink is a home automation system accessible to all installers. It's an easy to use radio operation, offering control of applications for lighting, shutters and blinds.

2 radio transmitters & receivers R.4 radio transmitters R.5 radio receivers R.6 technical guide R.7 Radio control automation

3 quicklink Hager democratises home automation Hager quicklink home automation is an offer based on a new configuration mode: quicklink mode! Requiring neither training nor a specific configuration tool, this new radio offer is available to all installers for retro-fit, renovation or new projects. 3 4 Your benefits: KX home automation without training. Technical data: KX radio 868,3 MHz. Extremely simple configuration. Direct quicklink configuration on the products. Accessible home automation for all installers. Radio operation no trunking or chasing of walls. Enjoy the decorative richness of kallysta. Range: 00 m outdoors and across two concrete sections. Also configurable with TX00 and ETS. Control applications for lighting, shutters and blinds.

4 Expert tips Home automation for you A new configuration mode without tools, without training: quicklink. Radio commands For installations without trunking or chasing. The new colours of home automation function = colour. 3 A choice of 35 kallysta frames To satisfy all decorative requirements of your customers. Preconfigurated kits For a simpler and faster implementation. 00% KX products tebis products can also be configured with TX00 and ETS. 4 A distinctive button All quicklink products are equipped with a configuration button "". Products tailored for renovation Installation in 40mm depth boxes.

5 quicklink KX radio transmitters and receivers quicklink is a configuration mode that does not require a Hager programming tool. This mode is based on learning by pressing the buttons located on the products. These products enable control of lighting, shutters, blinds or receivers operating together or individually. Characteristics - Preconfigured kits - Bidirectional products - Frequency: MHz KX radio - Configurable with TX00 and ETS - Range: 00m in open field and across two concrete sections. Connection capacity - 0,75 to x,5 mm² Lighting functions - O/OFF (impulse) - O - OFF - O/OFF (switch) - O/OFF (dimming) - O (dimming «+») - O (dimming «-») - timer - scenario - repetition (presence simulation) Shutter functions - Up - Down - Scenario - Up/down (switch) - Force up - Force down - Repetition (presence simulation) The repetition function It saves the commands carried out over a period of time. Once learned, the user may repeat the sequence automatically in a period of 4 hours. Examples: - Shutter up/down at fixed times - Simulation of presence (lighting). One of four pushbuttons is dedicated to this function. For technical information, see page R.8. Description Characteristics Pack Cat. ref. qty. kallysta input/output mechanisms for lighting kallysta O/OFF without neutral ( wire) - output 5 300W/VA (not CFL or LED) - pushbutton inputs WKT400 WKT40 kallysta O/OFF with neutral (3 wire) - output 6A AC, all loads - pushbutton inputs WKT40 kallysta input/output mechanisms for dimming kallysta O/OFF dimming without neutral ( wire) - dimming output 5 300W/VA (not CFL or LED) - pushbutton inputs WKT40 WKT4 kallysta dimming without neutral ( wire) with repetiton - dimming output 5 300W/VA (not CFL or LED) - 4 pushbutton inputs WKT4 kallysta input/output mechanisms for shutters and blinds kallysta up/down 4 wire (,,, ) - output 5A for motor - pushbutton inputs WKT4 WKT4 kallysta up/down 3 wire (,,, ) with repetiton function - output 5A for motor - 4 pushbutton inputs WKT4 kallysta up/down 4 wire (,,, ) with repetiton function - output 5A for motor - 4 pushbutton inputs WKT43 Description Characteristics Pack Cat. ref. qty. WKT4 KX radio remote controls buttons TU40 Delivered with battery (CR430 3V) 4 buttons TU404 6 buttons TU406 TU404 TU48 6 buttons 8 channels TU48 R.4

6 quicklink KX radio transmitters The radio buttons allow the addition of extra operating points without the need for cabling. Characteristics - Transmitters are uni directional in use and bi directional during configuration - Frequency: MHz radio KX - Low battery indication - Average life of battery: 5 years - Range: 00m in open field Radio wall detectors Can be fixed in a location and used to control a radio receiver with a 30V 0A contact. Characteristics - Available in batter and solar versions - Detection angle: 0 - IP55/IK04 - Uni directional in use and bi directional during configuration - Frequency: MHz KX radio - Range: 00m in free field - Delivered with 3 x.5v batteries. For technical information, see pages R.9, R.0, R.6 and R.7. Description Characteristics Pack Cat. ref. qty. Mechanisms for KX radio pushbuttons Supplied with: - protective site cover - double sided sticker - battery CR430 3V way/ buttons 4 way/4 buttons 6 way/6 buttons WKT30R WKT304R WKT306R WKT306R Description Colour Pack Cat. ref. Cat. ref. Cat. ref. qty. buttons 4 buttons 6 buttons kallysta covers Supplied with a label dimensions: 57 x 57 mm white carbon sand silver WKT90B WKT90C WKT90D WKT90T WKT904B WKT904C WKT904D WKT904T WKT906B WKT906C WKT906D WKT906T WKT904B Description Colour Pack Cat. ref. Cat. ref. qty. shutters dimmers and blinds WKT904C kallysta buttons silkscreened covers - for dimmers - for shutters and blinds white carbon sand silver Description Characteristics Pack Colour Cat. ref. qty. WKT94B WKT94C WKT94D WKT94T WKT95B WKT95C WKT95D WKT95T Radio control automation WK4 Decorative frame dimensions 80 x 80mm white WK40 Suitable for all kallysta switches carbon WK50 sand WK4 silver WK49 TRE50 IR movement detectors wall mounted KX radio battery emitter white anthracite TRE50 TRE5 solar emitter white TRE530 anthracite TRE53 IR movement detector and LED floodlight white TRE600 TRE600 Pushbuttons IP55 KX radio button/ input TRE30 buttons/ inputs TRE30 Recessed input modules KX radio input battery supply CR/ AA 3V for volt free input contacts TRB30A TRE30 TRB30B input 30V supply for volt free input contacts TRB30B R.5

7 quicklink KX radio receivers KX radio receivers act as power interfaces to control electrical loads. Characteristics - Bi directional receivers - Frequency: MHz KX radio - O/OFF (switch) - Timer - Force O - Force OFF - Up/down (switch) - Force up - Force down Lighting functions - O/OFF (impulse) -O -OFF Shutter functions -Up - Down - Scenario For technical information, see page R.8. Description Characteristics Pack Cat. ref. qty. Recessed receivers O/OFF KX radio Combined input/output unit KX radio output O/OFF 6A/30V AC TRB0 TRB0 volt free input output contact 0A 30V TRB50 TRB Recessed shutter/blind receivers KX radio Combined input/output unit KX radio output shutter/blind up/down 4 wire (,,, ) 5A/30V AC volt free inputs output contacts TRB TRB5 Recessed dimmer KX radio max load 00 W halogen/incandescent lamps TRB0 TRB0 Receivers O/OFF IP55 KX radio dimensions 50 x 85 x 35mm output 0A/30V AC TRE0 outputs 0A/30V AC TRE0 Receiver shutter/blind IP55 KX radio dimensions 50 x 85 x 35mm output shutter/blind up/down 4 wire (,,, ) 0A/30V AC` TRE TRE0 Receiver input + output IP55 KX radio volt free input contact output 0A/30V AC TRE400 Motion detector kit IP55 KX radio includes: TRE50 motion detector TRE0 wall mounted output TRE70 KX radio switch activator for plugs for remote-controlled switching of electrical loads TRC70D R.6

8 Flush-mounted radio output modules, quicklink Radio plug adapter actuator, quicklink : TRC70D Flush-mounted radio dimmer, quicklink : TRB0 ➀ ➁ ➀ ➁ on off ➂ ➃ ➀ Configuration button and LED ➁ Function button and LED for the output ➀ Configuration button and LED ➁ Radio transmitter ➂ Function button and LED for the output ➃ Terminal strip L : ase 30 V : eutral : Dimmer output Radio control automation R.7

9 Putting quicklink products into service It is possible to configure virtually any function in push-button mode i.e. using the buttons on the devices themselves. Each transmitter is equipped with a configuration button () and each receiver is equipped with a configuration button and a function button ( + ) for this purpose. All of the functions are indicated by coloured LEDs, whereby the button can be used to simply scroll through them. on off on off > s. Activating configuration mode Briefly press the button on the transmitter. The LEDs on the transmitter and all receivers light up.. Configuring the transmitter Briefly press the channel button to which a function is to be assigned on the transmitter. The LED on the transmitter flashes for second. Transmitter and receiver are now in configuration mode. 3. Selecting a function Press the button on the receiver repeatedly until the chosen function in indicated by the LED. 4. Confirming the selected function Press the button on the receiver and keep it pressed for > s until the LED starts flashing to confirm the selected function. To configure a group control system, repeat steps 3 and 4 on all other receivers in the group. 5. Terminating configuration Briefly press the button on the transmitter again. The LEDs on the transmitter and all receivers go out. The configuration process really is quick! Switching outputs Dimmer Shutter/blind outputs LED Function Function Function O/OFF (one surface control element) O/OFF, dimming ± O O, dimming + Opening, stop OFF OFF, dimming - Closing, stop Scene Scene Scene Scene Scene Scene Time switch Time switch O/OFF (switch) O/OFF (switch) Roller shutter ctrl. system (switch) Forced mode O Forced mode OFF Forced mode OPE Forced mode CLOSE Delete Delete Delete R.8

10 Flush-mounted radio input modules, quicklink Input modules: TRB30A/B Power supply Inputs Contact current Input current Battery service life Transmit frequency Range Indoors Outdoors Operating temperature Storage temperature Ingress protection rating Dimensions H W D Connection TRB30A Battery / AA (3 V) for floating contacts 30 µa 9 ma 5 years MHz Max. 30 m Max. 00 m 0 C to +45 C 0 C to +70 C IP30 48 mm 5 mm 6 mm Plug-in connector, connecting wires 00 mm long TRB30B 30V AC, 50 Hz ± 5% 30 µa 9 ma MHz Max. 30 m Max. 00 m 0 C to +45 C 0 C to +70 C IP0 48 mm 53 mm 7 mm Flush-mounted radio input module, -gang, battery-powered, quicklink, TRB30A Flush-mounted radio input module, -gang, 30 V, quicklink, TRB30B Radio control automation 3 TRB30B ➀ Battery compartment cover ➁ Battery, type 3 V CR ½ AA ➂ Configuration button and LED ➃ Plug-in connector with connecting wires for the inputs (0 cm long) LED Receiver category Transmitter duty cycle % 30 V Made in France L 6T3b ➀ Terminal strip for the power supply ➁ Configuration button and LED ➂ Plug-in connector with connecting wires for the inputs (0 cm long) R.9

11 Flush-mounted radio input modules, quicklink Surface-mounted radio tactile sensor, IP55, quicklink TRE30 : TRE30/ Contact assignments for external inputs Technical data Power supply Estimated service life of the battery Transmit frequency Range in open spaces Dimensions Cable length Minimum dwell period Ingress protection rating with wires connected Operating temperature Storage temperature Standards CR V (TBTS, SELV, ZLVS) 5 years MHz 00 m 76 mm 49 mm 3 mm < 3 m 50 ms IP55 IP3 0 C +50 C 0 C +70 C E / E E / E Installation LED 3 ➀ The configuration button and LED are located under the cover ➁ Transmission pilot light ➂ Operator control buttons ➃ Screw plugs for the battery compartment ➄ Wall-mounting holes ➅ Terminal strip holder ➆ Terminal strip for external inputs 5 4 States indicated by the transmission pilot light ➁ State of the LED Colour of the LED Meaning Lights up briefly Green Transmitting the control command, input configured Activation of one of the buttons Flashes for seconds Flashes for second Flashes for second Does not light up Green Orange Red - Transmitting the control command, scene input (teach-in mode) Input not configured Low battery charge o batteries or very low charge Batteries fitted the wrong way round The device may be mounted to the wall with double-sided adhesive tape or screws. The following must be taken into consideration when using external inputs: Mounting orientation, i.e. horizontal or vertical alignment Supply line < 3 m R.0

12 Flush-mounted radio output modules, quicklink Flush-mounted radio switching output modules quicklink TRB0, TRB50, socket quicklink TRC70D and dimmer output module quicklink TRB0 Power supply TRB0 TRB50 TRC70D 30V AC, 50 Hz ± 5% TRB0 Inputs, for floating contacts Outputs µ 6 A 30V AC, AC µ 0 A 30V AC, AC µ 6 A 30V AC for resistive loads / µ 0 A 30 V AC for lamp loads Type Switching capacity for: - Incandescent lamps - 30 V halogen lamps - LV halogen lamps with CTR - LV halogen lamps with ETR - Fluorescent lamps Max. 0 µf O contacts 300 W 300 W 600 VA 00 VA 0 36 W Max. 47 µf O contacts 500 W 500 W 800 VA 800 VA 36 W Max. 0 µf O contacts 300 W 300 W 600 VA 00 VA 0 36 W Dimmer W W 0 00 VA 0 00 VA Connection Flexible Rigid.5.5 mm².5.5 mm² mm² mm².5.5 mm².5.5 mm² Transmit frequency MHz Range Indoors Outdoors Max. 30 m Max. 00 m Operating temperature 0 C to +45 C 0 C to +45 C 0 C to +45 C 0 C to +45 C Storage temperature Ingress protection rating Dimensions H W D 0 C to +70 C IP mm 0 C to +70 C IP mm 0 C to +70 C IP (80) 54 mm 0 C to +60 C IP mm Radio control automation CTR: conventional transformer ETR: electronic transformer ECG: electronic control gear Flush-mounted radio module, output, quicklink : TRB0 Flush-mounted radio module, input/output, quicklink : TRB50 ➀ ➁ ➀ ➁ TRB0 ➂ ➃ ➂ ➃ ➀ Configuration button and LED ➁ Radio transmitter ➂ Function button and LED for the output ➃ Terminal strip L: ase 30 V : eutral : 30 V contact output ➀ Configuration button and LED ➁ Function button or conventional button ➂ Function button and LED for the output ➃ Terminal strip L: ase 30 V : eutral : 30 V contact output R.

13 Flush-mounted radio output modules, quicklink Flush-mounted radio blind module, output, quicklink inputs/ output, quicklink : TRB5 : TRB / flush-mounted radio blind module, Power supply Inputs Outputs Power dissipation Delay time between opposite directions Transmit frequency Range Indoors Outdoors Operating temperature Storage temperature Ingress protection rating Dimensions H W D Connection Flexible Rigid TRB 30V AC, 50Hz ± 5%, µ 6 A 30V AC, AC W 600 ms MHz Max. 30 m Max. 00 m 0 C to +45 C 0 C to +70 C IP30 48 mm 53 mm 30 mm.5.5 mm².5.5 mm² TRB5 30V AC, 50Hz ± 5%, for floating contacts, µ 6 A 30 V AC, AC W 600 ms MHz 0 C to +45 C 0 C to +70 C IP30 48 mm 53 mm 30 mm mm² mm² Flush-mounted radio blind module, output, quicklink : TRB Flush mounted radio blind module, inputs/ output, quicklink : TRB5 TRB LED L LED A M TRB5 ➀ Configuration button and LED ➁ Radio transmitter ➂ Function button and LED for the output ➃ Terminal strip L: ase 30 V : eutral : Open : Close 0 A LED L LED 4 M ➀ Configuration button and LED ➁ Button ➂ Function button and LED for the output ➃ Terminal strip L: ase 30V : eutral : Open : Close R.

14 Flush-mounted radio output modules, quicklink Technical data Maximum load per switching output Power supply Transmit frequency Switching capacity per output Ingress protection rating Operating temperature Storage temperature Dimensions (H W D) Connection TRE0x / TRE400 30V DC +0 5% MHz (µ 6 A 30V AC, AC) IP55 0 C +55 C 0 C +70 C 50 mm 85 mm 35 mm 0.75 mm² to.5 mm² 30V AC Incandescent lamps 500 W 30V AC Halogen lamps 500 W V DC Conventional transformer 600 W 4V DC V DC Electronic transformer 600 W 4V DC 30V AC Electronic transformer 600 W ballast Fluorescent lamps with ECG Fluorescent lamps with - conventional ballast connected in parallel 6 x 58 W Energy-saving lamps 6 x 8 W Connection Surface-mounted radio output modules, output, IP55, quicklink : TRE0 LED 3 LED TRE0 x 0 A S S L Radio control automation ➀ Configuration button and LED ➁➂ Function buttons and LEDs ➃ Terminal strip for outputs S and S Surface-mounted radio output modules, output, IP55, quicklink : TRE0 Surface-mounted radio module, input + output, IP55, quicklink ; connection: TRE400 TRE0 x 0 A S S S S L TRE400 S E S L R.3

15 Surface-mounted radio output modules, quicklink Surface-mounted radio blind output module, output, IP55, quicklink : TRE Power supply Transmit frequency Delay time between opposite directions Ingress protection rating Operating temperature Storage temperature Dimensions (H W D) Standards TRE 30V DC +0 5% MHz 600 ms IP55 0 C +55 C 0 C +70 C 50 mm 85 mm 35 mm E E E E E5048 Connecting TRE TRE L R.4

16 Surface-mounted radio motion detector, IP55, quicklink Surface-mounted radio motion detector, battery and solar-powered, IP55, quicklink TRE5x/TRE53x Technical properties TRE5x (battery) TRE53x (solar) TRE600 Colour white, anthracite white, anthracite, alum., brown white Detection zone m to the front / 0 m to the side m to the front / 360 detection: 6 m diameter under the sensor 0 m to the side 360 detection: 6 m diameter under the sensor Head adjustment (vertical) +90 / 30 - Head adjustment (horizontal) ±80 LED lamp adjustment - 80 (horizontal) / 340 (vertical) Masking panels Supplied with the devices Corner bracket (inside/outside) EE855 white; EE856 anthracite - Potentiometer brightness adjustment Time delay adjustment 5 to 000 lux 30 s to 5 min Sensitivity adjustment 0 to 00% Transmit frequency Controlled by remote control Pilot light detection MHz TU4xx Yes Power supply 3.5V AAA Solar cell with back-up battery 30V AC Range 00 m (open spaces) LED power Standards E E E E Ingress protection rating IP55 approx. 60 W (300 W white-hot) IK code 04 Ambient conditions Storage temperature 0 C to +55 C Operating temperature 0 C to +60 C Dimensions (L W H) 53 mm 9 mm 30 mm 3 mm 50 mm 57 mm Radio control automation Motion detector, quicklink Description : TRE5x/TRE53x Detection range: TRE5x/TRE53x IP55 wall mounting plate +/-80 vertical adjustment + 90 /- 30 setting potentiometer rotary sensor,5 m 4 m 6 m 0,5 m 8 m 6 m Recommended installation height,5 m. The detection zone must be free of obstructions at all times. 0 m 0 m α 0/360 R.5

17 Surface-mounted radio motion detector, IP55, quicklink Motion detector, quicklink Description : TRE600 rotary light panel Detection range: TRE600 Wall mount with power supply unit ,5 m ø 0,6 m 8 m m Recommended installation height,5 m. The detection zone must be free of obstructions at all times. 8 m 8 m setting potentiometer rotary sensor masking panel Installation: TRE5x/TRE53x Corner adapter: TRE5x/TRE53x Masking panels: TRE5x/TRE53x ➀ ➁ Installation: TRE600 Clac! R.6

18 Surface-mounted radio motion detector, IP55, quicklink Device adjustments TRE5xx button Fitting the batteries: TRE5x Time delay (OFF delay) Brightness Sensitivity (changing the range) button LED C 30 s lux 5min auto 5 min test - + TRE600 button LED A LED B Device adjustments Operation Setting Potentiometer Light switched on automatically for a predetermined period of time according to standard settings (factory). This function is only available if the time delay has been programmed for the detector. Automatic settings Set lux potentiometer to auto-test. The default settings are as follows: Lux =, (night mode only) period = 3 min Sensitivity = max. lux auto test Light switched on automatically for a predetermined period of time. This function is only available if the time delay has been programmed for the detector. Testing and confirming the detection range. Electrician settings Test mode Set potentiometer to auto-test. lux 5min 30 s auto 5 min test lux lux auto auto test test - + Radio control automation Adjusting the sensitivity. Used to set the range in order to prevent interference - + Adjusting the sensitivity. Used to set the sensitivity in order to avoid perturbation. - + LED Function on /off on off O/OFF (staircase lighting circuit) O OFF Scene Scene Time switch O/OFF (switch) on off Forced mode O Forced mode OFF Presence simulation Delete R.7

Rev ABB i-bus KNX 6151/11 U-500. Power and productivity for a better world TM

Rev ABB i-bus KNX 6151/11 U-500. Power and productivity for a better world TM 1 73-1-7831 Rev. 01 3.2012 6151/11 U-500 Power and productivity for a better world TM Page: 1 of 31 Switching actuator 1gang with binary Inputs, FM Actuator Article-no.: 6151/11 U-500 ETS search path:

More information

Technical data: Instabus EIB supply Voltage: YY 6 x 0.6 mm; red: bus (+) / black: bus (-)

Technical data: Instabus EIB supply Voltage: YY 6 x 0.6 mm; red: bus (+) / black: bus (-) Product designation: switching actuator 2fold 6A FM Design: FM (flush-mounted type) Article no.: 1057 00 ETS search path: Gira Giersiepen / Output / Binary output, 2fold / switching actuator 2fold 6A FM

More information

Universal Radio Cord Dimmer Order No.: Function

Universal Radio Cord Dimmer Order No.: Function Order o.: 0335 0 a) b) Function The permits radio-operated control of lighting fixtures. The device permits switching (short actuation) or dimming (long actuation) of the lighting. The dimmer is operated

More information

1. Function. Universal dimming actuator REG-K/2x230/ 300 W. Universal dimming actuator REG-K/230/ 500 W. Universal dimming actuator REG-K/230/ 1000 W

1. Function. Universal dimming actuator REG-K/2x230/ 300 W. Universal dimming actuator REG-K/230/ 500 W. Universal dimming actuator REG-K/230/ 1000 W L L N N on error RUN 1 2 3 4 KNX EIB 1 1 1 1 Chapter 9: Dimming actuators/control units Chapter 9:Dimming actuators/control unitsart. no.6493xxas of 10/079.2Universal dimming actuators Universal dimming

More information

LOAD AWG Solid CU Wire Only LINE NEUT FSP-211. High/Low PIR Occupancy Sensor 230 VAC, 50 Hz 1200W max ballast 5E4

LOAD AWG Solid CU Wire Only LINE NEUT FSP-211. High/Low PIR Occupancy Sensor 230 VAC, 50 Hz 1200W max ballast 5E4 DESCRIPTION AND OPERATION The is a motion sensor that dims lighting from high to low based on movement. This slim, low-profile sensor is designed for installation inside the bottom of a light fixture body.

More information

SeeTool - Solutions for KNX

SeeTool - Solutions for KNX SeeTool - Solutions for KNX Office building segment Application 8.2.1.0.0.4 Movement dependent automatic light control with light regulation and manual control, temperature control (electrical heating

More information

14/2 14/5 14/9 14/11 DELTA 14/12 DELTA

14/2 14/5 14/9 14/11 DELTA 14/12 DELTA /2 General data /5 Flushmounting devices /9 Surfacemounting devices / DELTA wave pushbutton /2 DELTA sys pushbutton For further technical information please refer to the GAMMA building management systems

More information

SLV SYSTEM SOLUTIONS. LIGHT AND HOME CONTROL.

SLV SYSTEM SOLUTIONS. LIGHT AND HOME CONTROL. 776 LIGT AND OME CONTROL. SYSTEM SOLUTIONS BIG ITE 2017 SLV SYSTEM SOLUTIONS. LIGT AND OME CONTROL. SLV meets the many requirements and needs of modern lighting control and home automation with its comprehensive

More information

EC5401B. B-Tronic EasyControl. Assembly and Operating Instructions. Wall/hand-held transmitter, 1-channel, bidirectional

EC5401B. B-Tronic EasyControl. Assembly and Operating Instructions. Wall/hand-held transmitter, 1-channel, bidirectional B-Tronic EasyControl EC5401B en Assembly and Operating Instructions Wall/hand-held transmitter, 1-channel, bidirectional Important information for: Fitters / Electricians / Users Please forward accordingly!

More information

STC-KNX (32-channel AP)

STC-KNX (32-channel AP) STC-KNX (32-channel AP) Bidirectional-Gateway between EnOcean and EIB/KNX-Bus Operating and installation instructions Humidity sensors Light sensors Presence sensors Gas sensors Room control panels Automated

More information

KNX ENO 634 (32-channel AP)

KNX ENO 634 (32-channel AP) WEINZIERL GINEERING GmbH KNX O 634 (32-channel AP) Bidirectional-Gateway between EnOcean and KNX-Bus Operating and installation instructions Digital inputs Link from KNX to EnOcean actuator Switch Dimmer

More information

Folding-Arm Cassette Awning markilux 6000

Folding-Arm Cassette Awning markilux 6000 Folding-Arm Cassette Awning markilux 6000 Fitting Instructions 1. Fitting the mounting fixtures 1.1 Fitting height H = Projection Y = Horizontal cover X = Value from Table 2 K = Headroom = G X G = Fitting

More information

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE FSP-2X1 Digital High/Low Pir Fixture Integrated Sensor INSTALLATION INSTRUCTIONS IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including the following:

More information

LCC1653, LCC1656, LRI1653 Datasheet ActiLume DALI System

LCC1653, LCC1656, LRI1653 Datasheet ActiLume DALI System 1/8 Product description The Philips ActiLume lighting control system consists of a small, lightweight sensor and controller, designed for easy integration into luminaires. ActiLume is a true Plug and Play

More information

Wireless Ceiling Motion Sensor for Occupancy / Vacancy Detection with integrated diagnostic tools INSTALLATION GUIDE

Wireless Ceiling Motion Sensor for Occupancy / Vacancy Detection with integrated diagnostic tools INSTALLATION GUIDE MOS-21 Wireless Ceiling Motion Sensor for Occupancy / Vacancy Detection with integrated diagnostic tools INSTALLATION GUIDE This guide covers all models of MOS-21 Ceiling occupancy sensor. The MOS-21 product

More information

The universal input/output device is a DIN rail mounted device. It is connected to the EIB via a bus connecting terminal.

The universal input/output device is a DIN rail mounted device. It is connected to the EIB via a bus connecting terminal. , GH Q631 0026 R0111 SK 0097 B97 The universal input/output device is a DIN rail mounted device. It is connected to the EIB via a bus connecting terminal. The device has 32 freely programmable inputs/outputs,

More information

User Manual 3X300 DIMMER MODULE DM03B02KNX

User Manual 3X300 DIMMER MODULE DM03B02KNX User Manual 3X300 DIMMER MODULE DM03B02KNX 1/29 Index 1.... Presentation of the Dimming functions 3 2.... Configuration and param. of the Dimming functions 5 3.... Physical addressing 29 2/29 1. Presentation

More information

INSTAT 868 Radio Frequency Single-Room Controls

INSTAT 868 Radio Frequency Single-Room Controls INSTAT 868 Radio Frequency Single-Room Controls Easy to operate wireless application HEATING People Performance Products Climate Controls Europe An Invensys company Radio Frequency Controls Single-room

More information

Width (W): 44 mm. bus connecting and branching terminal External supply --- Inputs: Number: up to 2 (depending on parameterization: channel 1 to 2)

Width (W): 44 mm. bus connecting and branching terminal External supply --- Inputs: Number: up to 2 (depending on parameterization: channel 1 to 2) Product name: Design: 2-channel push button interface UP (flush-mounting type) Item no.: 1118 00 ETS search path: Gira Giersiepen / input / binary input, 2fold / Universal push putton interface 2fold Functional

More information

Wireless Ceiling Mount Sensor for Occupancy / Vacancy Detection INSTALLATION GUIDE

Wireless Ceiling Mount Sensor for Occupancy / Vacancy Detection INSTALLATION GUIDE MOS-IR/DT Wireless Ceiling Mount Sensor for Occupancy / Vacancy Detection INSTALLATION GUIDE This guide covers all models of MOS-IR and MOS-DT ceiling occupancy sensor. The MOS-IR product family includes:

More information

FL ballasts Electronic dimming. PCA T8 ECO lp Y, 3x18 W and 4x18 W ECO T8

FL ballasts Electronic dimming. PCA T8 ECO lp Y, 3x18 W and 4x18 W ECO T8 T8 PCA T8 ECO lp Y, x18 W and x18 W ECO T8 Product description Processor-controlled ballast with y inside Highest possible energy class CELMA EEI = A1 BAT 1 Noise-free precise control via DSI signal, switchdim

More information

RFS 2. Operating instructions Bedienungsanleitung Mode d emploi

RFS 2. Operating instructions Bedienungsanleitung Mode d emploi RFS 2 Operating instructions Bedienungsanleitung Mode d emploi scope OF delivery 1 11 3 10 2 12 4 5 6 7 8 9 1 case 2 lithium button cell li-mn cr2450 (560 mah, 3 V) 3 display 4 usb socket 5 Sync in 6 Sync

More information

PCA T8 EXCEL one4all lp Y, W T8 fluorescent lamps

PCA T8 EXCEL one4all lp Y, W T8 fluorescent lamps EXCE oneall series T8 PCA T8 EXCE oneall lp Y, 58 W T8 fluorescent lamps Product description Processor-controlled ballast with y inside oise-free precise control via DSI signal, switchdim, corridorfuctio

More information

LMLR-710 (Plug-in type door chime receiver) LMLT-711 (push unit door chime transmitter)

LMLR-710 (Plug-in type door chime receiver) LMLT-711 (push unit door chime transmitter) MODEL: LMLR-710 (Plug-in type door chime receiver) LMLT-711 (push unit door chime transmitter) FEATURE: * 67 million self-learning coding RF wireless operation system. No interference with neighbors. *

More information

Automation and control equipment

Automation and control equipment Automation and control equipment D. Latching relays - Latching relays auxiliaries D. Relays - Interface relays D.5 Contactors and override contactors D.6 Electromechanical time switches D.8 Analogue time

More information

FL ballasts Electronic dimming. PCA T8 ECO lp Y II, W ECO T8

FL ballasts Electronic dimming. PCA T8 ECO lp Y II, W ECO T8 T8 PCA T8 ECO lp Y II, 18 58 W ECO T8 Product description Processor-controlled ballast with y II inside Highest possible energy class CELMA EEI = A1 BAT 1 Noise-free precise control via DALI or DSI signal,

More information

EBDHS-MB-AT-DD. RF ceiling PIR presence detector DALI / DSI dimming. Product Guide. Overview. Features

EBDHS-MB-AT-DD. RF ceiling PIR presence detector DALI / DSI dimming. Product Guide. Overview. Features Product Guide EBDHS-MB-AT-DD RF ceiling PIR presence detector DALI / DSI dimming Overview The EBDHS-MB-AT-DD is a passive infrared (PIR) motion sensor combined with two output channels capable of controlling

More information

Single-colour Dimming: Hand-held Transmitter 2801E Data Sheet

Single-colour Dimming: Hand-held Transmitter 2801E Data Sheet Hand-held Transmitter 2801E Data Sheet Hand-held transmitter 2801E The Transmitter 2801E is a radio transmitter module designed as a hand-held remote control unit. Together with a separate receiver module

More information

FIXTURE INTEGRATED DAYLIGHT DIMMING PHOTOSENSOR

FIXTURE INTEGRATED DAYLIGHT DIMMING PHOTOSENSOR FIXTURE INTEGRATED DAYLIGHT DIMMING PHOTOSENSOR Product Overview The is a fixture-integrated dimming photosensor. It provides a continuous dimming signal to a 0-10 VDC dimming ballast, based on daylight

More information

Niko connected switch. Effortlessly smarter

Niko connected switch. Effortlessly smarter Niko connected switch Effortlessly smarter 1 Everything is connected Stay in control, wherever you are Nowadays, we are connected to everything and everyone. Customers expect more and more from their devices.

More information

AT-SL-DDR & AT-SL-DDR-SA

AT-SL-DDR & AT-SL-DDR-SA AT-SL-DDR & AT-SL-DDR-SA Product Guide Slim-line RF DALI/DSI + relay controller Overview The AT-SL-DDR and AT-SL-DDR-SA are wireless controllers with two output channels capable of controlling incandescent,

More information

Modular. Modular. devices

Modular. Modular. devices Modular Modular devices Modular Devices Indicators and Push Buttons The new range of indicator lights and push buttons replaces and expands upon the whole SV range and is composed of the following three

More information

HL25K INSTALLATION INSTRUCTIONS. Hidden Link Shelf Top Standard IR Receiver

HL25K INSTALLATION INSTRUCTIONS. Hidden Link Shelf Top Standard IR Receiver DESCRIPTION The Hidden Link IR Receiver is a small shelf-top infrared repeater assembly. It includes an IR receiver. a 789-44 Connecting Block, a Power supply, and 4 283D emitters. The Hidden Link IR Receiver

More information

UNIVERSAL LOW VOLTAGE LED DIMMERS DMS-P SERIES

UNIVERSAL LOW VOLTAGE LED DIMMERS DMS-P SERIES UNIVERSAL LOW VOLTAGE LED DIMMERS Description DMS-P series universal PWM dimmers are designed for smooth, flicker-free dimming of all constant voltage LED modules, including MR16 bulbs as well as 12V/24V

More information

KNX ENO 620/622 (32-channel AP)

KNX ENO 620/622 (32-channel AP) KNX O 620/622 (32-channel AP) Gateway between EnOcean and the KNX bus Operating and installation manual Installation and connection Fig. 1: KNX O 620 Fig. 2: KNX O 622 Application KNX O 620 and 622 serve

More information

Silent Gliss. Switches and Controls

Silent Gliss. Switches and Controls Switches and Controls Control System 0450 Radio Control System Product Information For use with all Silent Gliss motors Radio controlled - no wiring from switch to control box Up to 255 house and 255 room

More information

The Instructions should be read, prior to commencing the installation, failure to follow these instructions will void your warranty.

The Instructions should be read, prior to commencing the installation, failure to follow these instructions will void your warranty. Low Voltage System The Platinum Low Voltage lighting system can power up to 120 candle pods depending on the length of cables used during the installation this can reduce the number of pods to 24 per outlet

More information

WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany

WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany 522 WAGO Application: Plastic Technology Center (SKZ) in Würzburg, Germany WAGO Products: WAGO-I/O-SYSTEM with ETHERNET Controllers, DALI and EnOcean Components Wireless Technologie System Overview 524

More information

KNX S-UP. Actuator for 230 V or 24 V. Installation and Adjustment

KNX S-UP. Actuator for 230 V or 24 V. Installation and Adjustment EN KNX S-UP Actuator for 230 V or 24 V Installation and Adjustment 1 Content 1. Description... 3 1.1. Technical data... 3 1.2. Structure... 4 1.2.1. Structure 230 V AC version... 4 1.2.2. Strucure 24 V

More information

www.greenelectricalsupply.com Installation Guide Model: WLVD Wireless Low Voltage Dimmer (Receiver) Specifications: Power Supply 24 V DC Place on 24V power line prior to light load. 10A Maximum Load Package

More information

Product data for intelligent lighting control. Intelligent lighting control

Product data for intelligent lighting control. Intelligent lighting control for intelligent lighting control Intelligent lighting control January 2010 The product data in this catalogue gives you thorough information about the products, their features, characteristics, dimensions

More information

This product is for use in a dry, indoor environment only. This product is not to be installed near water, liquid, or flammable materials.

This product is for use in a dry, indoor environment only. This product is not to be installed near water, liquid, or flammable materials. The equipment described in this manual contains high voltage. Always disconnect power to the equipment before installing, disconnecting, or servicing the product. This product is for use in a dry, indoor

More information

XT-DL-IRK. DinkyLink IR Receiver Kit. Plasma / LCD / LED / CFL Friendly IR Receiver INSTALLATION INSTRUCTIONS

XT-DL-IRK. DinkyLink IR Receiver Kit. Plasma / LCD / LED / CFL Friendly IR Receiver INSTALLATION INSTRUCTIONS XT-DL-IRK DinkyLink IR Receiver Kit Plasma / LCD / LED / CFL Friendly IR Receiver INSTALLATION INSTRUCTIONS DESCRIPTION These small IR receivers have been designed for mounting in very small spaces. They

More information

TOP SERVO SIGNAL 5 SERVO SIGNAL 3 SERVO SIGNAL 4 SERVO SIGNAL 6 T B T B T B T B T B SERVO TRIGGER 1 BOTTOM

TOP SERVO SIGNAL 5 SERVO SIGNAL 3 SERVO SIGNAL 4 SERVO SIGNAL 6 T B T B T B T B T B SERVO TRIGGER 1 BOTTOM Micro Miniatures Servo Controller Channel Location of connections and switches TOP SERVO SIGNAL SERVO SIGNAL 7 SERVO SIGNAL 6 SERVO SIGNAL 5 SERVO SIGNAL SERVO SIGNAL SERVO SIGNAL SERVO SIGNAL SIGNAL COMMON

More information

PBIT, PBIR Infrared remote control unit

PBIT, PBIR Infrared remote control unit 58, Infrared remote control unit Infrared remote control unit for PRNT IRC controllers PRU, PRU/A, PRVU, PRFB-A and PRFB-V. Can be used as a room operating unit. Temperature setpoint reset ccupancy switch

More information

MULTILINK. Installation and Operating Instruction

MULTILINK. Installation and Operating Instruction R TI N B Y TM MULTILINK Installation and Operating Instruction Catalog No: 63099 DESCRIPTION The MultiLink control provides four separate ways to drive a Somfy motor: - Radio Remote Control using Telis

More information

Home Automation, Inc. Model 12A00. Wireless Receiver. Installation Manual

Home Automation, Inc. Model 12A00. Wireless Receiver. Installation Manual Home Automation, Inc. Model 12A00 Wireless Receiver Installation Manual Document Number 12I00 Rev D August, 2002 CONTENTS DESCRIPTION...1 COMPATIBLE TRANSMITTERS...1 INSTALLATION...2 OPERATION...3 SETUP

More information

AC 01.2 Modbus TCP/IP

AC 01.2 Modbus TCP/IP General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR.2 type range and part-turn actuators of the SQ/SQR.2 type range with interface. Features and functions Power

More information

HIGH/LOW/OFF PIR OUTDOOR PHOTO/MOTION SENSOR IN IP66 ENCLOSURE FOR FLEXIBLE MOUNTING

HIGH/LOW/OFF PIR OUTDOOR PHOTO/MOTION SENSOR IN IP66 ENCLOSURE FOR FLEXIBLE MOUNTING HIGH/LOW/OFF PIR OUTDOOR PHOTO/MOTION SENSOR IN IP66 ENCLOSURE FOR FLEXIBLE MOUNTING Product Overview The FSP-2x1B is a family of passive infrared (PIR) outdoor sensors that raise or lower the electric

More information

USER MANUAL. Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330

USER MANUAL. Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330 USER MANUAL Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330 Introduction Congratulations on your purchase of the Extech EX330 Meter. The EX330 offers AC/DC Voltage, AC/DC Current, Resistance,

More information

STX Stair lighting controller.

STX Stair lighting controller. Stair lighting controller STX-1792 STX-1792 controller is used to control stairs lighting dynamically. The backlight is switched on with the subsequent steps, depending on the motion directions: ascending

More information

The Mural Collection II. Advanced All-Digital Decora-Style Dimmers with Preset and Scene Capable Models

The Mural Collection II. Advanced All-Digital Decora-Style Dimmers with Preset and Scene Capable Models The Mural Collection II Advanced All-Digital Decora-Style Dimmers with Preset and Scene Capable Models The Mural Collection II Setting The Mood of The New Millennium Lighting Control with Style. Three

More information

2 $POUFOUT

2 $POUFOUT 2 3 Insta The company 4 Tronic Trafo Controls Instafunk Appendix 46 4 Insta is an innovative, medium-sized company, part of a group of companies of building installation technology with focus on development

More information

Universal 1-channel switching receiver EnOcean Easyfit RCM 250

Universal 1-channel switching receiver EnOcean Easyfit RCM 250 Universal 1-channel switching receiver EnOcean Easyfit RCM 250 User Manual V1.14 May 2007 Revision History The following major modifications and improvements have been made to the initial version of the

More information

LOM-15 CD-LOM15-01 PRODUCT OVERVIEW. Product. Description. Specifications SKU: LOM-15. Duplex Receptacle

LOM-15 CD-LOM15-01 PRODUCT OVERVIEW. Product. Description. Specifications SKU: LOM-15. Duplex Receptacle CD-LOM15-01 LOM-15 Product Duplex Receptacle Description The Evolve Wall Mounted Outlet is a component of the Evolve lighting control system and is wired in place of a standard receptacle in any existing

More information

BOLD, STRIKING & REFRESHING VIVO

BOLD, STRIKING & REFRESHING VIVO BOLD, STRIKING & REFRESHING VIVO 2 MODERN CHOICE BOLD, STRIKING & REFRESHING VIVO Choose the colour to suit your style Excel VIVO can be customised to suit your tastes and your interiors. Keep it simple

More information

INSTABUS RADIO GATEWAY

INSTABUS RADIO GATEWAY INSTA radio gateway INSTA radio gatewaychapter 2:Interfaces/gatewaysArt. no.680999as at 07/022.3Gateways Function! C B Article no. 680999 D E F Description of the operating elements On the front of the

More information

Radio Powr SavrT Occupancy / Vacancy Sensor

Radio Powr SavrT Occupancy / Vacancy Sensor 369480c 1 01.25.13 Radio Powr SavrT Occupancy / Vacancy Sensor LutronR Radio Powr SavrT occupancy/vacancy sensors are wireless, battery-powered passive infrared (PIR) sensors that automatically control

More information

10 to 30 VDC (10% max. permissable ripple peak-to-peak)

10 to 30 VDC (10% max. permissable ripple peak-to-peak) R Background Suppression Sensor Photoelectric Sensor With Adjustable Setting Distance in Rugged Metal Housing H Stable detection regardless of material color or size of sensing object: 2% or less black/white

More information

DC Motor. Controller. User Guide V0210

DC Motor. Controller. User Guide V0210 DC Motor Controller User Guide 59757 V0210 This kit provides a great exercise of intermediate soldering skills and creates a device that enables you to control various Pitsco motors, Tamiya gearboxes,

More information

animeo KNX 4 DC 2 A Motor Controller WM 24 V DC Installation manual

animeo KNX 4 DC 2 A Motor Controller WM 24 V DC Installation manual somfy.com animeo KNX 4 DC 2 A Motor Controller WM 24 V DC Installation manual Ref. 1860128 2008-2013, SOMFY SAS. ALL RIGHTS RESERVED. REF. 5059105C - 2013/04/30 Table of contents 1 2 3 4 5 6 7 8 9 10 Introduction...

More information

Expandable Series Wireless Multi Unit Doorbell System

Expandable Series Wireless Multi Unit Doorbell System Expandable Series Wireless Multi Unit Doorbell System Thank you for purchasing our Wireless Doorbell system. Please carefully read this user manual before usage and installation. North America Office:

More information

Product Manual. ABB i-bus EIB / KNX. Universal Interface US/U Intelligent Installation Systems

Product Manual. ABB i-bus EIB / KNX. Universal Interface US/U Intelligent Installation Systems Product Manual ABB i-bus EIB / KNX Universal Interface US/U 12.2 Intelligent Installation Systems US/U 12.2, Universal Interface, 12-fold, FM Contents Page 1 General.3 1.1 Product and functional overview..3

More information

Radio Technology Somfy. Pocket Programming Guide

Radio Technology Somfy. Pocket Programming Guide Radio Technology Somfy Pocket Programming Guide TABLE OF CONTENTS HOW DOES RTS WORK?... 1 IDENTIFY RTS CONTROL OPTIONS... 2 TRANSMITTERS Telis Hand-Held Remote 4 Telis Soliris Hand-Held Remote 5 Telis

More information

WIRELESS Energy Monitor - Smart Meter

WIRELESS Energy Monitor - Smart Meter Energy saving made simple MONITOR CONTROL SAVE WIRELESS Energy Monitor - Smart Meter Monitors your electricity use and cost in real time Instruction Manual EW4500 IMPORTANT Please retain your Instruction

More information

RAM 712 KNX room thermostat for surface-mounted and flush-mounted installation

RAM 712 KNX room thermostat for surface-mounted and flush-mounted installation RAM 712 KNX room thermostat for surface-mounted and flush-mounted installation RAM 712 712 9 200 Version: Dec-10 (subject to change) Page 1 of 65 Contents 1 Functional characteristics... 4 1.1 Operation...

More information

INSTRUCTION MANUAL. Starter SK studio flash

INSTRUCTION MANUAL. Starter SK studio flash INSTRUCTION MANUAL Starter SK-200 studio flash www.dynaphos.com 1 Savety Thank you for choosing DYNAPHOS studio lighting equipment! Before you proceed further, please read the instruction manual. Use of

More information

Radio Touch Order no.: 2880 xx. Operation and installation instructions. 1 Safety instructions. 2 Structure of the device (Figure 1) Radio Touch

Radio Touch Order no.: 2880 xx. Operation and installation instructions. 1 Safety instructions. 2 Structure of the device (Figure 1) Radio Touch Radio Touch Order no.: 2880 xx Operation and installation instructions 1 Safety instructions Electrical equipment must only be installed and assembled by a qualified electrician in accordance with the

More information

Smart Dupline Wireless dimmer with energy reading Type SHJWD200WExxx

Smart Dupline Wireless dimmer with energy reading Type SHJWD200WExxx Smart Dupline Wireless dimmer with energy reading Type SHJWD200WExxx Universal wireless dimmer up to 200 W for R, L, C load and LED lamps Wireless transmission based on IEE802.15.4 @ 2.4 GHz Automatic

More information

20 - Arc Guard Systems

20 - Arc Guard Systems Arc Guard Index Arc Guard - Arc Guard Arc Guard...1 -.14 Selection Arc Guard System, description...6...2...2 Description,...1 Description,...1 Description, with detectors...4 Description,...5 Detectors

More information

INTERACT3. User manual Wireless adaptor plug switch IP 20/IP 44, wireless adaptor plug dimmer German/English

INTERACT3. User manual Wireless adaptor plug switch IP 20/IP 44, wireless adaptor plug dimmer German/English User manual Wireless adaptor plug switch IP 20/IP 44, wireless adaptor plug dimmer German/English 53916.00.001.01 Wireless adaptor plug switch IP 20 (Model ZW ZS 3500) 53917.00.001.01 Wireless adaptor

More information

User's Guide Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330

User's Guide Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330 User's Guide Mini Multimeter with Non-Contact Voltage Detector (NCV) Model EX330 Introduction Congratulations on your purchase of the Extech EX330 Meter. The EX330 offers AC/DC Voltage, AC/DC Current,

More information

DECORATOR COMFORT CONTROL (DCC)

DECORATOR COMFORT CONTROL (DCC) DECORATOR COMFORT CONTROL (DCC) The Decorator Comfort Control (DCC) enables a window treatment to provide shading from the sun automatically and conveniently. The DCC sun sensor continually monitors sun

More information

Blinded by the LIGHT Manfred Mann (#6 in August 1976)

Blinded by the LIGHT Manfred Mann (#6 in August 1976) Blinded by the LIGHT Manfred Mann (#6 in August 1976) SceneStyle from Mode is the stylish way to control your lighting. Self-contained, they connect to your existing wiring without fuss and can control

More information

DEMO of Self-Powered PIR Radio Sensor

DEMO of Self-Powered PIR Radio Sensor 1. Purpose The purpose of this concept is to demonstrate the feasibility of an autarkic radio occupancy sensor for indoor use based on EnOcean technology. The concept implements the following functions:

More information

General-Purpose Photoelectric Sensors with Self-Contained Amplifier

General-Purpose Photoelectric Sensors with Self-Contained Amplifier General-Purpose Photoelectric Sensors with Self-Contained Amplifier HP Series The convenience of industry standards, plus reliability. Effective light axis alignment 50% power savings Prevention of accidental

More information

LED Field Strength Indicator Kit

LED Field Strength Indicator Kit LED Field Strength Indicator Kit Description The Field Strength Indicator kit from Qrpkits.com provides a visual way to monitor RF fields through the brightness of an LED. It will respond to RF fields

More information

PHASED OUT. LED Driver Compact dimming. Driver LCAI 55W 900mA 1750mA ECO SR ECO series

PHASED OUT. LED Driver Compact dimming. Driver LCAI 55W 900mA 1750mA ECO SR ECO series Product description Independent dimmable LED Driver Constant current LED Driver Output current adjustable between 900 1,750 ma Max. output power 55 W Nominal life-time up to 100,000 h 5-year guarantee

More information

Mallia. Express Yourself Like Never Before

Mallia. Express Yourself Like Never Before TM Mallia Express Yourself Like Never Before It s s simple Mixing colours is a breeze with Mallia TM. With four new metal plates added to the current range, the possibilities are not only endless, but

More information

LASTS UP TO 2X LONGER THAN OTHER LED BULBS CONSUMES LESS ELECTRICITY VS. CFL BULBS UP TO 50% BRIGHTER VS. CFL BULBS.

LASTS UP TO 2X LONGER THAN OTHER LED BULBS CONSUMES LESS ELECTRICITY VS. CFL BULBS UP TO 50% BRIGHTER VS. CFL BULBS. LASTS UP TO 2X LONGER THAN OTHER LED BULBS CONSUMES LESS ELECTRICITY VS. CFL BULBS UP TO 50% BRIGHTER VS. CFL BULBS Contact Person: FIREFLY ELECTRIC & LIGHTING CORP. 7/F Zen Offices Bldg. 1111 Natividad

More information

Busch-dynasty Covers for switches/ push-buttons

Busch-dynasty Covers for switches/ push-buttons BUSCH-JAEGER Innovations 0 Busch-dynasty Covers for switches/ push-buttons Article-o. Order-o. Rocker For flush-mounted switch gw, gw, intermediate, push switch. anthracite 0 antique brass ) --00 --00-0-00-0-0-0-0-0-

More information

Infrared Wall Mount Occupancy Sensor

Infrared Wall Mount Occupancy Sensor LOS-WIR 1 07.16.10 Infrared Wall Mount Occupancy Sensor The LOS-WIR wall-mounted passive infrared sensor is used in spaces with pendant fixtures, ceiling fans, or high ceilings (more than 12 ft./3.7 m).

More information

animeo KNX 4 AC Motor Controller 31. March 2016 WM/DRM V AC

animeo KNX 4 AC Motor Controller 31. March 2016 WM/DRM V AC 2011-2016, SOMFY SAS 50 avenue du Nouveau Monde 74300 Cluses France 1/57 Table of contents 1 Definitions... 4 1.1 Manual Command... 4 1.2 Automatic Command... 4 1.3 US push button ergonomics... 4 1.4 EU

More information

Operating instructions II / 2004

Operating instructions II / 2004 Operating instructions II / 2004 Light and presence sensor TOUCH DIM LS/PD LI OSRAM GmbH Costumer-Service-Center (CSC) Steinerne Furt 62 86167 Augsburg, Germany www.osram.com www.osram.de Tel. : (+49)

More information

OPERATING INSTRUCTIONS ARE ON PAGE 5. SECTION 2 Technical Data Transmitter Unit. RVHT 2 MULTI-FIT Programmable R/F Thermostat-Pair SECTION 1

OPERATING INSTRUCTIONS ARE ON PAGE 5. SECTION 2 Technical Data Transmitter Unit. RVHT 2 MULTI-FIT Programmable R/F Thermostat-Pair SECTION 1 OPERATING INSTRUCTIONS ARE ON PAGE 5 RVHT 2 MULTI-FIT Programmable R/F Thermostat-Pair SECTION 1 This Programmable Ravenheat R/F controlled room Thermostat RVHT 2, consists of 2 items: a Mobile Transmitter

More information

Binary Inputs. Ref.-No. KNX universal binary input, 8-gang. ETS-product family: Series embodiment (SE-) device (2 units) Ref.-No.

Binary Inputs. Ref.-No. KNX universal binary input, 8-gang. ETS-product family: Series embodiment (SE-) device (2 units) Ref.-No. Binary s 1 L1 L2 L3 N E1 N1 E2 N2 E3 N3 E4 N4 KNX + - 2 1 KNX universal binary input, 4-gang ETS-product family: Product type: Series embodiment (SE-) device (2 units) Ref.-No. 2114 REG 4-gang binary input

More information

ELECTRONICS STARTER KIT

ELECTRONICS STARTER KIT ELECTRONICS STARTER KIT (MAP 474 - N02QQ) R These five small self-assembly circuits cover basic principles of electronics and can be adapted for numerous practical application. The five circuits include

More information

animeo KNX/EIB 4 AC Motor Controller WM/DRM V AC

animeo KNX/EIB 4 AC Motor Controller WM/DRM V AC somfy.com animeo KNX/EIB 4 AC Motor Controller WM/DRM 220-240V AC Installation manual Ref. 1860114 Ref. 1860116 2007, SOMFY SAS. ALL RIGHTS RESERVERD. REF. 5050779-30/04/2007 Table of contents Introduction...

More information

Mx-D15 Intelligent Valve Actuator

Mx-D15 Intelligent Valve Actuator Application Small radio controlled, battery-powered actuator for room temperature control. For thermostat valve bodies for direct mounting on commercially available radiator valves for room-specific temperature

More information

LRF20CR2BPWH Ceiling MNT Wireless Occ Sensor

LRF20CR2BPWH Ceiling MNT Wireless Occ Sensor 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LRF20CR2BPWH Ceiling MNT Wireless Occ Sensor Lutron Catalog Number Manufacturer Description Weight per unit Product Category

More information

IRIS \ IRIS-I QUICK SET-UP GUIDE STEP 1 INSTALL

IRIS \ IRIS-I QUICK SET-UP GUIDE STEP 1 INSTALL IRIS \ IRIS-I QUICK SET-UP GUIDE STEP 1 INSTALL Confirm contents of package: 1 sensor, 1 cable, 1 wide lens (default), 1 narrow lens, mounting template, User s Guide. Install the sensor at the desired

More information

SVM F2 Calculator. A small competent calculator for compact or wall montage. Users manual

SVM F2 Calculator. A small competent calculator for compact or wall montage. Users manual SVM F2 Calculator A small competent calculator for compact or wall montage Users manual Users manual F2 1 INSTALLATION... 5 1.1 AT DELIVERY... 5 1.2 CONNECTIONS... 6 2 MOUNTING... 7 2.1 MOUNTING ON A

More information

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009 Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred

More information

BFS / BFSM SERIES Installation & Maintenance Manual

BFS / BFSM SERIES Installation & Maintenance Manual Introduction: The BFS / BFSM series electric actuators have battery backup modules for fail safe operation. The BFS series is for two position control and the BFSM series is for proportional control, both

More information

innovate. create. illuminate. furniture lighting 2011

innovate. create. illuminate. furniture lighting 2011 innovate. create. illuminate. furniture lighting 2011 Our idea CONTENTS 2 Our idea... 4 The importance of furniture lighting 6 Lighting a traditional style kitchen 8 Lighting a modern style kitchen 20

More information

Radio Powr SavrTM Wireless Occupancy / Vacancy Ceiling Sensor

Radio Powr SavrTM Wireless Occupancy / Vacancy Ceiling Sensor Radio Powr SavrTM Wireless Occupancy / Vacancy Sensor Lutron Radio Powr SavrTM occupancy/vacancy sensors are wireless, battery-powered, passive infrared (PIR) sensors that automatically control lights

More information

Cat. No. H8861 Model: RCL-S-STAT

Cat. No. H8861 Model: RCL-S-STAT -AAA Cat. No. H8861 Model: RCL-S-STAT INSTALLATION AND OPERATION INSTRUCTIONS IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE INTRODUCTION This remote

More information

Radio Technology Somfy. Pocket Programming Guide

Radio Technology Somfy. Pocket Programming Guide Radio Technology Somfy Pocket Programming Guide Table of Contents P. 1 How Does RTS Work? P. 2 Identify RTS Control Options Transmitters P. 4 DecoFlex Wireless Wall Switch P. 5 DecoFlex Table Top Accessory

More information

User Manual. KNX MultiLight Dali. Article number: function Technology AS. Picture: KNX MultiLight products

User Manual. KNX MultiLight Dali. Article number: function Technology AS. Picture: KNX MultiLight products User Manual KNX MultiLight Dali Article number: 44002 Picture: KNX MultiLight products function Technology AS Table of Contents 1 THE KNX MULTILIGHT DALI... 3 2 INTRODUCTION... 3 3 START-UP AND GENERAL

More information

ENGLISH PORTUGUÊS NEDERLANDS DAB200

ENGLISH PORTUGUÊS NEDERLANDS DAB200 DEUTSCH ENGLISH FRANÇAIS NEDERLANDS ESPAÑOL PORTUGUÊS NORSK DAB200 Contents Introduction..... 2 What is DAB + Digital Radio?.... 2 Setting up..... 3 Backlit display.... 4 Using headphones...... 4 Your

More information