Combined vibration and temperature test of CX4 Antennas
|
|
|
- Shonda Bailey
- 6 years ago
- Views:
Transcription
1 DELTA Test Report TEST Reg. no. 19 Combined vibration and temperature test of CX4 Antennas Performed for AC Marine A/S DANAK-19/14553 Revision B Project no.: T Page 1 of 14 including 1 annex 10 October 2014 DELTA Venlighedsvej Hørsholm Denmark Tel Fax VAT No This report is issued under the rules of DANAK (Danish Accreditation) and ILAC (International Laboratory Accreditation Cooperation) including its MRA (Mutual Recognition Arrangement). Further information can be found at and The report must not be reproduced, except in full, without the written approval of DELTA. Version m
2 Page 2 of 14 Title Test objects Report no. Project no. Combined vibration and temperature test of CX4 Antennas 2 pcs. CX4 Antennas Detailed information is given in Section 2. The test objects were received 5 September DANAK-19/14553 Revision B T Test period 5 September 2014 Client Contact person Manufacturer Specifications Results Test personnel AC Marine A/S Pilehøj Vænge 8E 3460 Birkerød Denmark Tel.: Mr Christian Bøhme chb@acmarine.dk AC Marine A/S IEC 60945: Fourth edition, 2002 Maritime navigation and radio communication equipment and systems - General requirements - Methods of testing and required test results. IEC 60945: Fourth edition, CORRIGENDUM 1, 2008 IEC :2010, Test and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests No malfunctions were detected. Olling Truelsen Dan Hansen
3 Page 3 of 14 Date 10 October 2014 Responsible Andreas W. Højsgaard, M.Sc.Eng. DELTA This test report replaces previously issued test report DANAK-19/14553 Rev. A dated 8 October The changes in this report are: IEC updated to correct version throughout the test report. Page 8: Place of measurements of accelerometers corrected. Page 10: Curves corrected.
4 Page 4 of 14 Table of contents Page 1. Summary of test Test requirements 5 2. Test objects Test objects 6 3. General test conditions Functional test Standard environment 7 4. Test and results Vibration - Resonance search Vibration - Endurance sinusoidal at -55 C 11 Annex 1 List of instruments 13
5 Page 5 of Summary of test 1.1 Test requirements The following tests were carried out as agreed with the client, in the Z-axis only. The antennas were mounted in a 45 angle, due to the limitations of the dimensions inside the climatic chamber and in order for the antennas to see more rough conditions than normal mounting when considering vertical vibration. Test Test method Vibration - Resonance search IEC :2007 Vibration - Combined cold / vibration IEC :2010
6 Page 6 of Test objects 2.1 Test objects Test object Name of test object Antenna 1 Model / type CX4 Part no Serial no. S/N: 0001 Manufacturer AC Marine Supply voltage N/A Comments Worst case tolerances Test object Name of test object Antenna 2 Model / type CX4 Part no Serial no S0213 Manufacturer AC Marine Supply voltage N/A Comments Std. production model Photo 1 Test objects Antenna 1 to the left. Antenna 2 to the right.
7 Page 7 of General test conditions 3.1 Functional test A functional test was performed before and after the test. The functional test was carried out by the client. 3.2 Standard environment Normal environmental condition: Temperature : 15 C - 35 C Humidity : 25 %RH - 75 %RH Air pressure : 86 kpa kpa (860 mbar mbar) Power supply voltage : U nom. ±3 %
8 Page 8 of Test and results 4.1 Vibration - Resonance search Specifications IEC 60945, clause 8.7. Test method IEC :2007, Test Fc: Vibration (sinusoidal). Severity and procedure Frequency range : Hz Frequency / amplitude : Hz : ±1 mm Hz : ±0.7 g Sweep rate : Max. 0.5 octave/min. Number of axes : 1 The test object is de-energised during the exposure. During the resonance search, the resonance frequencies are determined by means of stroboscopic light with slow motion facility and accelerometer measurements of the amplification factors (Q). Resonance frequencies with an amplification factor above 2 are recorded. Results Only Z-axis exposure was performed as agreed with the client. The table below shows the result of the resonance search. Place of measurement Axis Frequency [Hz] Antenna 1 Z Antenna 2 Z Amplification factor [Q] Measurement curves of the maximum amplification factors and resonance frequencies and definition of axes are enclosed below.
9 Page 9 of 14 Photo 2 Vibration, resonance search, mounting of accelerometer. Z Y X Photo 3 Vibration, resonance search, definition of axes.
10 Page 10 of 14 (gn)/(gn) Ratio_1_5 profile(f) control(f) Ratio_1_5: Hz, (gn)/(gn) Ratio_1_5: Hz, (gn)/(gn) dx = Hz, dy = (gn)/(gn) Frequency (Hz) Curve 1 Resonance search, Z-axis Antenna gn profile(f) Ratio_2_ control(f) Ratio_2_5: Hz, (gn)/(gn) Ratio_2_5: Hz, (gn)/(gn) dx = Hz, dy = (gn)/(gn) Frequency (Hz) Curve 2 Resonance search, Z-axis - Antenna
11 Page 11 of Vibration - Endurance sinusoidal at -55 C Specification IEC 60945, clause 8.7. Test method IEC :2010, Test and guidance: Combined climatic (temperature/humidity) and dynamic (vibration/shock) tests Severity and procedure Frequency range : Hz Frequency / amplitude : Hz : ±1 mm Hz : ±0.7 g Procedure : Dwell on found resonances. Dwell conditions : Q 5 : 120 minutes at each resonance frequency Q < 5 : 120 minutes 30 Hz Number of axes : 3 mutually perpendicular Temperature : -55 C A narrow sweep will be used if 2 resonances in the same axis are close to each other. The test objects are de-energised during the entire exposure. Results Only Z-axis exposure was performed on fundamental frequency as agreed with the client. Based on the results from the resonance search, the following endurance conditions were performed: Axis Frequency Duration Z 11 Hz 120 Min No malfunction was observed during the exposure and the function of the test objects was OK after the endurance exposure according to the client. Exposure curves and definition of axes are enclosed below. No damage was observed at the visual inspection performed after the exposures.
12 Page 12 of 14 (gn)/(gn) Ratio_1_5 profile(f) control(f) Frequency (Hz) Curve 3 Endurance vibration, Z-axis.
13 Page 13 of 14 Annex 1 List of instruments
14 Page 14 of 14 List of instruments NO. DESCRIPTION MANUFACTURER TYPE NO. EVFGT-50 EL.DYN SHAKER LING DYNAMICS V LS 96 / ACCELEROMETER BRÜEL & KJÆR a / ACCELEROMETER BRÜEL & KJÆR / ACCELEROMETER BRÜEL & KJÆR ACC. PRE-AMP. BRÜEL & KJÆR ACC. PRE-AMP. 4-CHAN. BRÜEL & KJÆR VIBR. CONTROLLER LDS DACTRON LAS 200 EVFGT-17 CLIMATIC CHAMBER VKV600 WEISS TECHNIK WT
Compass safe distance measurements of Trackball
We help ideas meet the real world Test Report DANAK Reg. no. 19 Compass safe distance measurements of Trackball Performed for CASP Elektronik DANAK-198084 Project no.: A503330-1 Page 1 of 7 2 annexes 22
DELTA Test Report. Type approval testing of C6200 and C6250. Performed for Selco A/S. We help ideas meet the real world
We help ideas meet the real world DELTA Test Report TEST Reg. no. 19 Type approval testing of C6200 and C6250 Performed for Selco A/S DANAK-1910203 Project no.: A505341 Page 1 of 54 including 6 annexes
Type approval testing of Engine Controller M2500
DELTA Test Report TEST Reg. no. 19 Type approval testing of Engine Controller M2500 Performed for Selco A/S Project no.: A506392 Page 1 of 68 including 6 annexes 15 October 2009 DELTA Venlighedsvej 4 2970
DELTA Test Report. Performed for INWIDO Denmark A/S. DANAK 100/2331 Project no.: Page 1 of October 2017
DELTA Test Report TEST Reg. no. 100 Laboratory measurement of airborne sound insulation of a INWIDO Denmark A/S coupled sidehung construction with Float 6 mm glass in the external sash and a Float 3145
Performed for LEO Pharma A/S, LEO Innovation Lab
DELTA Test Report TEST Reg. no. 19 Radio parameter test of KlikKit Performed for LEO Pharma A/S, LEO Innovation Lab DANAK-19/18090 Project no.: 117-24389-1 Page 1 of 47 13 July 2017 DELTA Venlighedsvej
Type approval testing of SIGMA Protection & Control modules S6000, S6100 and S6500
Test Report DANAK Reg. no. 19 Type approval testing of SIGMA Protection & Control modules S6000, S6100 and S6500 Performed for Selco A/S Project no.: E501273-1 Page 1 of 29 6 annexes 16 October 2003 DELTA
DELTA Test Report. FCC Part 15 C test of Trackman III (TMA3A) Performed for Trackman A/S
DELTA Test Report TEST Reg. no. 19 FCC Part 15 C test of Trackman III (TMA3A) Performed for Trackman A/S Project no.: T200869 Page 1 of 51 Including 4 annees 07 February 2012 DELTA Venlighedsvej 4 2970
DELTA Test Report. Certification testing of generic cabling products: Unscreened channel, Class E, 4 connector model. Performed for Sterling
DELTA Test Report TEST Reg. no. 19 Certification testing of generic cabling products: Unscreened channel, Class E, 4 connector model Performed for Sterling DANAK-19/16909 Project no.: T213173-01 Page 1
Calibration Certificate
ÌÇa8SÈ-EÇÂ!ÈfeFÎ Calibration Certificate Date of issue 2015-12-08 Calibrated by Gert Schnipper Approved by Ole F. Carlsen 1 (5) CUSTOMER: GN RESOUND A/S GTO LAUTRUPBJERG 7-9 2750 BALLERUP DEVICE UNDER
Special testing of 100 ohm unshielded channel, Class E. Performed for HCS KABLOLAMA SISTEMLERI SAN.VE TIS.A.S.
We help ideas meet the real world Test Report DANAK Reg. no. 19 Special testing of 100 ohm unshielded channel, Class E Performed for HCS KABLOLAMA SISTEMLERI SAN.VE TIS.A.S. DANAK-19J1508 Project no.:
COPY FOR INFORMATION ONLY
COPY FOR INFORMATION ONLY SHEET No. 2 of 9 GKN Aerospace Services Test Equipment Used (i) Vibration Facility Comprising :- a. Data Physics Vibration Controller Type DP560 System No 5109 CAL DUE: Oct 2006
This is to certify that the results from the test(s) requested by. Quanta Laboratories Job No. QL-Q8-916 and conform
3199 De La Cruz Boulevard Santa Ciara, CA 95054-2483 TEL: (408) 988-0770 FA: (408) 988-0762 E-MAIL: testfsiquantalabs.com This is to certify that the results from the test(s) requested by ALPAHA NOVATECH
CERTIFICATE of QUALITY TEST
Testing laboratory for climatic, mechanical and corrosive environmental stress CERTIFICATE of QUALITY TEST Test report - No. 10996.07 / 14 Client Baumer Hübner GmbH Max-Dohrn-Str. 2 + 4 10589 Berlin Equipment
Product Specifications Approval Sheet
TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: tstsales@mail.taisaw.com Web: www.taisaw.com
Report. Test of noiselab version 2.0. Client: DELTA. AV /06 Page 1 of 54 annexes. 4 August DELTA Danish Electronics, Light & Acoustics
Report Test of noiselab version. Client: DELTA Page of 54 annexes 4 August 6 DELTA Danish Electronics, Light & Acoustics Venlighedsvej 4 97 Hørsholm Danmark Tlf. (+45) 7 9 4 Fax (+45) 7 9 4 www.delta.dk
DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 204, VIBRATION, HIGH FREQUENCY
INCH-POUND MIL-STD-202-204 18 April 2015 SUPERSEDING MIL-STD-202G w/change 2 (IN PART) 28 June 2013 (see 6.1) DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 204, VIBRATION, HIGH FREQUENCY AMSC N/A FSC
ARS UNIT QUALIFICATION
TEST REPORT ARS UNIT QUALIFICATION Prepared For: Mr. Ryan Welsh Boulder Engineering Studio 2516 49 th Street, Unit 2 Boulder, CO 80301 FILE NO.: 40640 P.O. NO.: L6293 DATE TESTING STARTED: 02/04/13 DATE
High Ohmic Flat Chip Resistors
OCT 0603, OCU 0805 High Ohmic Flat Chip Resistors FEATURES Unique very high ohmic chip resistor product Standard TC: ± 100 ppm/k Excellent overall stability Low voltage coefficient: 0.05 %/V Wide high
High Frequency Flat Chip Resistors
FEATURES Speciality product for RF applications Low-inductance trimmed product Suitable for more than 10 GHz Resistance range: 6.8 Ω to 470 Ω Green product, supports lead-free soldering. APPLICATIONS Telecommunication
SRM VDE. REG.-Nr. E932. Cap Diameter (D1, mm) Body Diameter (D2, mm)
D2 VDE REG.-Nr. E932 Specifications Per IEC 605- Features B L D IEC60065 & UL676 Compliant MELF packaging yet capable of high power handling Special conductive film enhances anti-surge capability. Absorbs
MIL-STD-202G VIBRATION, HIGH FREQUENCY
VIBRATION, HIGH FREQUENCY 1. PURPOSE. The high frequency vibration test is performed for the purpose of determining the effect on component parts of vibration in the frequency ranges of 10 to 500 hertz
Precision Thin Film Chip Resistor Array
and precision automotive grade thin film chip resistor arrays with convex terminations combine the proven reliability of discrete chip resistors with the advantages of chip resistor arrays. Defined tolerance
Test Specification for Type Approval
A2 (1991) (Rev.1 1993) (Rev.2 1997) (Rev. 2.1 July 1999) (Rev.3 May 2001) (Corr.1 July 2003) (Rev.4 May 2004) (Rev.5 Dec 2006) (Rev.6 Oct 2014) Test Specification for Type Approval.1 General This Test
Shock/Vibration/ Thermal Cycling
National Highway Traffic Safety Administration Shock/Vibration/ Thermal Cycling Nha Nguyen NHTSA 1 Objective/Purpose The purpose of the testing is to stress a rechargeable energy storage system (REESS)
SPECIFICATION ESD FSP250-60HNC. Released Date:2012/08/15-21:58:49
SPECIFICATION ESD12047757 FSP250-60HNC Released Date:2012/08/15-21:58:49 1/9 禁止翻印外洩 ESD12047757-R1.pdf 發行時間 :2012/8/15 全漢企業股份有限公司 FSP TECHNOLOGY INC. 台灣桃園市建國東路 22 號 NO.22,Jianguo E, Rd.,Taoyuan City,Taiwan,R.O.C.
ELCAR T ART. 3/3406 3/3620 PAGINA 1 DI 7. servizio automatico documentazione tecnica T T W H
ART. 3/3406 3/3620 PAGINA DI 7 CUSTOMER : CUSTOMER'S REFERENCE : 3/34 3/35 3/36 Series DESCRIPTIONS : SHENGXIN TY : METALLIZED POLYESTER FILM CAPACITOR-BOX series Fig. w T T W H.5max P 20min H S L0.5max
High Precision Thin Film Chip Resistor ± 0.05 %; ± 5 ppm/k
High Precision Thin Film Chip Resistor FEATURES Low temperature coefficient and tight tolerances () Superior moisture resistivity 0.25 % (85 C; 56 days; 85 % RH) Lead (Pb)-free solder contacts, RoHS compliant
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 BRUEL AND KJAER North American Service Center Calibration Laboratory 3079 Premiere Parkway Suite 120 Duluth, GA 30097 William Shipman
DELTA Test Report. Radio parameter test of Aperio radio in Server lock KS PA2. Performed for ASSA AB
DELTA Test Report TEST REPORT issued by an Accredited Testing Laboratory TEST Reg. no. 19 Radio parameter test of Aperio radio in Server lock KS100-640-PA2 Performed for ASSA AB REC-E704276_4 Rev. A Project
Qualification testing of 100 ohm shielded channel, Class EA. Performed for Tyco Electronics Raychem N.V.
We help ideas meet the real world DELTA Test Report DANAK TEST Reg. no. 19 Qualification testing of 100 ohm shielded channel, Class EA Performed for Tyco Electronics Raychem N.V. DANAK-19J1636 Project
EMC TEST REPORT RADISYS CORPORATION. Tel: Fax:
EMC TEST REPORT Report No.: Product: Model No. : FCC2012-8029E GSM Tracker PRIME AT PLT Brand Name: PRIME Applicant: Address: Issued by: Lab Location: RADISYS CORPORATION 601 North Congress Ave Suite 439,
INTERNATIONAL OIML R 103 RECOMMENDATION
INTERNATIONAL OIML R 103 RECOMMENDATION Edition 1992 (E) Measuring instrumentation for human response to vibration (with reference to International Standards 8041 and 5347 of the International Organization
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
Report On. Radio Frequency Exposure Testing of the Winland Electronics, Inc. EnviroAlert Electronic Multi-Zone Environmental Alarm System
America Report On Radio Frequency Exposure Testing of the Winland Electronics, Inc. EnviroAlert Electronic Multi-Zone Environmental Alarm System EN62311 January 2008 AS/NZS 2772.2:2011 October 2017 REPORT
Professional Leaded Resistors
,, - Professional FEATURES Approved according to CECC 400-806 Advanced thin film technology Power dissipation rating up to W Excellent overall stability: class 0.25 Wide professional range: 0.22 Ω to 22
Mica 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications [Bluetooth, WiFi (802.11b/g), Zigbee, WiMedia etc.] Intended for SMD mounting Supplied in tape on reel 2 Description The Mica antenna
CERTIFICATE of CALIBRATION
Primary Laboratory within AC Electricity Danish Standards Laboratory AC and RF Quantities DPLE Partner (Danish Primary Laboratory for Electricity) Page no. Appendix 1/5 1 CERTIFICATE of CALIBRATION for
RF, COAXIAL. HYBRID COUPLERS POWER DIVIDERS and DIRECTIONAL COUPLERS GENERIC SPECIFICATION
1/ 23 Titre / Title RF, COAXIAL HYBRID COUPLERS POWER DIVIDERS and DIRECTIONAL COUPLERS GENERIC SPECIFICATION Written by Responsibility Date Signature P. THIBAUD Space Project manager 29/01/10 Verified
SPECIFICATION ESD FSP460-60HCN. Released Date:2011/04/01-15:26:46
SPECIFICATION ESD10076435 FSP460-60HCN Released Date:2011/04/01-15:26:46 1/10 禁止翻印外洩 ESD10076435-R1.pdf 發行時間 :2011/4/1 全漢企業股份有限公司 FSP TECHNOLOGY INC. 台灣桃園市建國東路 22 號 NO.22,Jianguo E, Rd.,Taoyuan City,Taiwan,R.O.C.
Bilateral Comparison EURAMET.AUV.V-K1.2. (vibration acceleration) Swiss Federal Office of Metrology METAS Christian Hof
Final report 2011 04 20 Bilateral Comparison EURAMET.AUV.V-K1.2 (vibration acceleration) Swiss Federal Office of Metrology METAS Christian Hof Abstract This report describes the results obtained in a bilateral
Flavus GSM Snap-In Antenna
Product Specification 1 Features Designed for GSM applications [800/900/1800/1900 MHz] Intended for Snap-In mounting Supplied in trays 2 Description The Flavus antenna is intended for use with all GSM
DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 213, SHOCK (SPECIFIED PULSE)
INCH-POUND MIL-STD-202-213 18 April 2015 SUPERSEDING MIL-STD-202G w/change 2 (IN PART) 28 June 2013 (see 6.1) DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 213, SHOCK (SPECIFIED PULSE) AMSC N/A FSC
BCcomponents DATA SHEET. MBA 0204; MBB 0207; MBE 0414 Professional leaded resistors. Product specification File under BCcomponents, BC08.
DATA SHEET File under BCcomponents, BC08 2000 Sep 06 FEATURES Advanced thin film technology Power dissipation rating up to 1 W Excellent overall stability: class 0,25 Wide professional range: 0,22 Ω to
Metallized Polypropylene Film Capacitor AC Filtering Radial Type
Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?999
Comata 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications [Bluetooth, WiFi (802.11b/g), Zigbee, WiMedia etc.] Intended for SMD mounting Supplied in tape on reel 2 Description The Comata antenna
EU RO Mutual Recognition Technical Requirements
LEVEL GAUGES/TRANSMITTERS Version 0.0 This document is subject to controlled issue and can be found here: http://www.euromr.org/technical-requirements *** Uncontrolled if downloaded or printed *** Adoption
SPECIFICATION ESD FSP500-60GHC. Released Date:2012/12/26-15:25:33
SPECIFICATION ESD08032632 FSP500-60GHC Released Date:2012/12/26-15:25:33 1/10 禁止翻印外洩 ESD08032632-R10.pdf 發行時間 :2012/12/26 全漢企業股份有限公司 FSP TECHNOLOGY INC. 台灣桃園市建國東路 22 號 NO.22,Jianguo E, Rd.,Taoyuan City,Taiwan,R.O.C.
EIA STANDARD TP-27B. Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors EIA B ELECTRONIC INDUSTRIES ASSOCIATION
ANSI/-1996 Approved: April 17, 1996 EIA STANDARD TP-27B Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors (Revision of EIA-364-27A) MAY 1996 ELECTRONIC INDUSTRIES ASSOCIATION
Technical Documentation
Technical Documentation Microphone Type 4964 for Hand-held Analyzer Types 2250, 2250-L and 2270 Supplement to Instruction Manual BE 1712 English BE 1864 11 Microphone Type 4964 for Hand-held Analyzer
Flight Unit S/N 001 Environmental Vibration Test Report. Dwg. No
Rev. ECO Description Author Approved Date 01 32-261 Initial Release M. Smith 12-6-07 Flight Unit S/N 001 Environmental Vibration Test Report Dwg. No. 32-06050.0101 Revision 01 December 8, 2007 32-0605.0101
EN v1.2.1 ( ) TEST REPORT FOR b/g PCIExpress Minicard MODEL NUMBER: AR5BXB63 REPORT NUMBER: 06U
EN 301 489-17 v1.2.1 (2002-08) TEST REPORT FOR 802.11b/g PCIExpress Minicard MODEL NUMBER: AR5BXB63 REPORT NUMBER: 06U10459-6 ISSUE DATE: JULY 31, 2006 Prepared for ATHEROS COMMUNICATIONS, INC. 5480 GREAT
ELECTRONICS TESTING CENTER, TAIWAN
Report No.: 14-06-MAS-233-01 EMC TESTING DEPARTMENT Page: 1/27 CONFORMANCE TEST REPORT FOR ECE R10(REV.05) Report No.: 14-06-MAS-233 Client: Product: Model No.: Comment Issues: Trade Name: Manufacturer/supplier:
Fusca 2.4GHz SMD Antenna
Product Specification 1 Features Designed for 2.4GHz applications [Bluetooth, WiFi (802.11b/g), ZigBee, etc.] Intended for SMD mounting Supplied in tape on reel 2 Description The Fusca antenna is intended
Rufa 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications [Bluetooth, WiFi (802.11b/g), Zigbee, WiMedia etc.] Intended for SMD mounting Supplied in tape on reel 2 Description The Rufa antenna
CENTROTECNICA S.r.l. Centrotecnica Test House
Centrotecnica Test House Environmental Testing Lab - Our capabilities Centrotecnica Test House Enrvironmental Testing Lab - Our capabilities For Vibration and Shock Testing Name of the equipment Rated
OIML R 130 RECOMMENDATION. Edition 2001 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION. Octave-band and one-third-octave-band filters
INTERNATIONAL RECOMMENDATION OIML R 130 Edition 2001 (E) Octave-band and one-third-octave-band filters Filtres à bande d octave et de tiers d octave OIML R 130 Edition 2001 (E) ORGANISATION INTERNATIONALE
High-ohmic/high-voltage resistors
FEATURES Types VR37 and VR68 meet the safety requirements of: UL1676 (range 51 kω to 11 MΩ) EN665 BS665 (U.K.) NFC 92-13 (France) VDE 86 (Germany) High pulse loading capability Small size. APPLICATIONS
Power Sensors Ltd. PQube 3 AC Analyzer IEC Class 0,2 S Accuracy Compliance Report
PSL Standards Lab 980 Atlantic Avenue Alameda, CA 94501 USA TEL ++1-510-522-4400 FAX ++1-510-522-4455 www.standards.com Sensors Ltd. PQube 3 AC Analyzer IEC Class 0,2 S Accuracy Compliance Report IEC 62053-22
TECHNICAL REPORT KONGSBERG SEATEX AS TYPE TESTING OF SEATEX AIS 100 TRANSPONDER REPORT NO REVISION NO. 03 DET NORSKE VERITAS
KONGSBERG SEATEX AS TYPE TESTING OF SEATEX AIS 100 TRANSPONDER REPORT NO. 2002-3207 REVISION NO. 03 DET NORSKE VERITAS Head of Office: Veritasvn. 1, N-1322 HØVIK, Norway Table of Content Page 1 SCOPE OF
Piezo Ceramics DC-AC Inverter. Specification
` Piezo Ceramics DC-AC Inverter Specification Note: Actual product image may be different. Model FC01-12-06 Part No. 400-8888-010 Description Customer Hardware Rev 1.0 Document Rev 1.2 1 lamps with wide
High Stability Thin Film Flat Chip Resistor 0.05 % (1000 h rated power at 70 C)
TNPW e3 High Stability Thin Film Flat Chip Resistor FEATURES Superior moisture resistivity.25 % (85 C; 56 days; 85 % RH) Lead (Pb)-free solder contacts, RoHS compliant AEC-Q compliant (sizes 2 to 16) Low
RMC10,16,20,32,35,50,63 Automotive Grade Page: 1/10
+5 C +35 C 75% Product specification contained in this data sheet are subject to change at any time without notice If you have any questions or a Purchasing Specification for any quality Agreement is necessary,
Status Date Prepared Reviewed Endorsed Approved
Discipline Engineering Standard - NSW Category Signalling Title Reference Number SPS 19 - (RIC Standard: SC 07 40 04 00 SP) Document Control Status Date Prepared Reviewed Endorsed Approved May 05 Standards
STEREO IMPACT Solar Energetic Particles Package (SEP) Dynamic Test Plan
1 2 Jet Propulsion Laboratory 352G-WBT-0507 Interoffice Memorandum January 13, 2005 To: From: Subject: References: Distribution W. B. Tsoi STEREO IMPACT Solar Energetic Particles Package (SEP) Dynamic
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
Test Report. Prepared for: Becker Avionics, Inc. Model: TG Description: Aeronautical basestation radio used for emergencies
Test Report Prepared for: Becker Avionics, Inc Model: TG660-50 Description: Aeronautical basestation radio used for emergencies Serial Number: 10001, 10002 FCC ID: 2AHX9TG660 To FCC Part 87 Date of Issue:
IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC,
F IBER OPTIC ATTENUATOR (FC/UPC, SC/UPC, LC/UPC) 1. GENERAL This specification covers the requirements of the standard attenuator for single mode optical fiber to be supplied to TOT Public Company Limited
VALUE DESCRIPTION. R > 100 kω R/R max.: ±0.25% Ω R/R max.: ±0.1% Ω
FEATURES Precision resistors in small outlines Low noise. APPLICATIONS All general purpose applications. DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a
Comata 2.4 GHz SMD Antenna
Product Specification 1 Features Designed for 2.4 GHz applications [Bluetooth, WiFi (802.11b/g), Zigbee, WiMedia etc.] Intended for SMD mounting Supplied in tape on reel 2 Description The Comata antenna
FCC TEST REPORT. SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY Co., Ltd.
FCC TEST REPORT APPLICANT : GN Netcom Inc PRODUCT NAME : Bluetooth Headsets MODEL NAME : HSC040W TRADE NAME : N/A BRAND NAME : Jabra FCC ID : BCE-HSC040W STANDARD(S) : 47 CFR Part 15 Subpart B TEST DATE
Product Data Sheet. 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies
PD-0033 Product Data Sheet 3M Serial Advanced Technology Attachment (SATA) Boardmount Plug, Receptacle and Cable Assemblies 3 Electronic Solutions Division Page: 1 of 12 Table of Contents 1.0 Scope...2
DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 201, VIBRATION
INCH-POUND MIL-STD-202-201 18 April 2015 SUPERSEDING MIL-STD-202G w/change 2 (IN PART) 28 June 2013 (see 6.1) DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 201, VIBRATION AMSC N/A FSC 59GP FOREWORD
EUROFINS PRODUCT SERVICE GMBH EN V1.6.1 EN V Asset tracker. Rock
EUROFINS PRODUCT SERVICE GMBH RADIO TEST- REPORT EN 300 440-1 V1.6.1 EN 300 440-2 V1.4.1 Asset tracker Rock TEST REPORT NUMBER: G0M-1103-1036-T-42 Eurofins Product Service GmbH Storkower Str. 38c, 15526
Pulse Proof, High Power Thick Film Chip Resistors
Pulse Proof, High Power Thick Film Chip Resistors -HP e3 STANDARD ELTRICAL SPIFICATIONS SIZE LIMITING POWER RATING ELEMENT MODEL P 70 INCH METRIC W VOLTAGE MAX. V FTURES Excellent pulse load capability
Certificate of Test AND KEEPS ALL REQUIREMENTS ACCORDING THE FOLLOWING REGULATIONS IEC :2001 IEC :2007
Certificate of Test WE HEREBY CERTIFY THAT: Certificate No.: R07122709E Yuan Hsun Electric Co., Ltd. No. 57, Chung He Rd, Zuo-Ying Dist., Kaohsiung City 813, Taiwan R.O.C. Quad photobeam detector Quad-200CS
S5X Mobile Microcomputer. Technical Information 223,5 82,25 77,75 8,5 8,5 164,5 10,3. AMP Stecker AMP Connector 52,5 POWER SYSTEM MODE STATUS
S5X Mobile Microcomputer Technical Information 247 223,5 POWER SYSTEM 82,25 77,75 MODE STATUS 9 164,5,3 AMP Stecker AMP Connector 1 14 9 16 15 28 29 42 1 8 52,5 Overview DESCRIPTION The Sauer-Danfoss S5X
Trimmable Flat Chip Resistors
,, TCA 1206 Trimmable Flat Chip Resistors, and TCA 1206 trimmable flat chip resistors are best suited whenever stable circuit adjustment is required and potentiometers will be either too expensive, too
Flavus 2.4 GHz Snap-In Antenna
Product Specification 1 Features Designed for 2.4 GHz applications [Bluetooth, WiFi (82.11b/g), Zigbee, WiMedia etc.] Intended for Snap-In mounting Supplied in trays 2 Description The Flavus antenna is
POWER SYSTEM MODE STATUS
S1X Mobile Microcomputer Technical Information 174 155 55,75 POWER SYSTEM MODE STATUS 60,25 8,5 8,5 10 9 10 123,5 10,5 AMP Stecker AMP Connector 1 14 15 28 55 29 42 Overview DESCRIPTION The Sauer-Danfoss
EUROFINS PRODUCT SERVICE GMBH EN V Tracking solution. Bolero-LT2
EUROFINS PRODUCT SERVICE GMBH RADIO TEST-REPORT EN 300 440 V1.4.1 Tracking solution Bolero-LT2 TEST REPORT NUMBER: G0M-1103-1037-T-42 Eurofins Product Service GmbH Storkower Str. 38c, 15526 Reichenwalde,
AGN 008 Vibration DESCRIPTION. Cummins Generator Technologies manufacture ac generators (alternators) to ensure compliance with BS 5000, Part 3.
Application Guidance Notes: Technical Information from Cummins Generator Technologies AGN 008 Vibration DESCRIPTION Cummins Generator Technologies manufacture ac generators (alternators) to ensure compliance
Technical Note. Noise reducing properties of crash barriers. Performed for WillumTech. AV 1217/11 Project no.: A Page 1 of 19 incl.
Technical Note Noise reducing properties of crash barriers Performed for WillumTech Project no.: A581500 Page 1 of 19 incl. 1 annex 6 October 2011 DELTA Venlighedsvej 4 2970 Hørsholm Denmark Tel. +45 72
Contact person Date Reference Page Rebecca Hultman P09140A 1 (5) Electronics
issued by an Accredited Testin Laboratory Contact person Rebecca Hultman 2014-03-13 A 1 (5) Electronics +46 516 59 23 Rebecca.Hultman@sp.se 02 ISO/IEC 17025 HMS Industrial Networks AB Rickard Andersson
Metallized Polypropylene Film Capacitor AC Filtering Radial Type
Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES High peak current capabilities Long lifetime Material categorization: for definitions of compliance please see www.vishay.com/doc?9991
EN 55015: 2013 Clause Pass. EN 55015: 2013 Clause Pass. EN 55015: 2013 Clause Pass
Reference No.: WTD15S0730643E Page 2 of 42 1 Test Summary Test Item Conducted Disturbance at Mains Terminal, 9kHz to 30MHz Radiation electromagnetic disturbance, 9kHz to 30MHz Radiation Emission, 30MHz
Organisation Internationale de Métrologie Légale
Organisation Internationale de Métrologie Légale INTERNATIONAL RECOMMENDATION Integrating-averaging sound level meters Sonomètres intégrateurs-moyenneurs OIML R 88 Edition 1998 (E) CONTENTS Foreword...
Certificate of Calibration Sound Level Meter
NTacoustic coustic Calibration & Testing Laboratory Level 1, 418 Elizabeth Street., Surry Hills NSW 2010 USTRLI Ph: (02) 8218 0570 email: service@natacoustic.com.au website: www.natacoustic.com.au division
SETUP I: CORD. Continuous Systems
Lab #8 Continuous Systems Name: Date: Section / Group: SETUP I: CORD This part of the laboratory is mainly exploratory in nature. By using your hand to force the cord close to one of its ends, you should
X Series Data Sheet 375, 500 Watt AC-DC and DC-DC DIN-Rail Converters
Features RoHS lead-free-solder and lead-solder-exempted products are available Rugged 5 mm DIN-rail snap-fit design Class I equipment Universal AC-input with single stage conversion AC to DC or DC input
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-607 Revision: 1.0 Issue Date: Oct.15, 2001 HAMBURG INDUSTRIES CO., LTD. 6FL., No.12, Lane 270, Sec. 3, Pei Shen Rd., Shen Keng Hsiang, Taipei Hsien, Taiwan
MIL-STD-202G SHOCK (SPECIFIED PULSE)
SHOCK (SPECIFIED PULSE) 1. PURPOSE. This test is conducted for the purpose of determining the suitability of component parts and subassemblies of electrical and electronic components when subjected to
Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz
Coaxial Switch 50W SPDT Pin Diode, Reflective TTL Driver 10 to 3000 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C Power L(+20 dbm), M(+28 dbm), U(+30 dbm)
PRODUCT DATA. Sound Intensity Calibrator Type Uses and Features
PRODUCT DATA Sound Intensity Calibrator Type 4297 Sound Intensity Calibrator Type 4297 is used for on site sound pressure calibration and pressure residual intensity index verification. Its most important
Emission test to FCC requirements of DeLaval Activity meter AM2
DELTA Test Report TEST REPORT issued by an Accredited Testing Laboratory TEST Reg. no. 19 Emission test to FCC requirements of DeLaval Activity meter AM2 Performed for DeLaval International AB REC-E703572_3
2. See Manual Part 1.4.1, (Identical Items, "Boilerplate" for all Manual Parts), Section A. Draft
2159 Part 11.5.1 Recommended Environmental Requirements for Electrical and Electronic Railroad Signal System Equipment Revised 2159 (1 Pages) A. Purpose 1. This Manual Part recommends environmental requirements
RESOLUTION MSC.116(73) (adopted on 1 December 2000) PERFORMANCE STANDARDS FOR MARINE TRANSMITTING HEADING DEVICES (THDs)
MSC 73/21/Add.3 RESOLUTION MSC.116(73) THE MARITIME SAFETY COMMITTEE, RECALLING Article (28(b) of the Convention on the International Maritime Organization concerning the functions of the Committee, RECALLING
Wire Wound Chip Inductors LPI0805FT Series
INTRODUCTION Product : LPI Miniature SMD Inductor For Power Line Size : 0805 The LPI series are low profile inductor used in notebook, PC, cellular phone backlight, inverter and etc. The devices are designed
SITRANS F flowmeters. SITRANS F M System information MAGFLO electromagnetic flowmeters. 4/18 Siemens FI
Function All are based on Faraday s law of induction: U M = B v d k U M = Measured voltage induced in the medium perpendicular to the magnetic field and the flow direction. The voltage is tapped at two
Data sheet. FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: RMC-1K-17N1011 /1 Date: 2017. 11. 28 Data sheet Title: Style: FIXED RECTANGULAR TYPE RMC10,16,20,32,35 Automotive Grade AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note:
High Frequency Leaded Resistors
High Frequency Leaded Resistors FEATURES Speciality product for RF applications Low-inductance non-helical trimmed product Suitable for more than 3 GHz Resistance range: Green product, supports lead-free