Magnetic Path Length. Outside Dimensions Outer Diameter mm
|
|
- Willis Potter
- 6 years ago
- Views:
Transcription
1 MAJOR USES Output choke coils for Switching Mode Power Supply For DC-DC converter Normal mode choke coils for noise control Please contact us when the coils are used in a high-voltage circuit. FEATURES Smaller size in comparison with ferrite choke coil by about half in volume Lower core loss in comparison with silicon steel sheet by about half More excellent DC bias and temperature characteristics in comparison with dust choke Unidirectional leakage flux enables parts to be mounted adjacently adjacent mounting parts. CORE STANDARD SPECIFICATIONS Cross Core Part No. Sectional Abbreviation (Old Core Part No.) Area cm LNCG (CG) LNC9G (C9G) LNCG (CG) LNCG (CG) LNCG (CG) LNCG (CG) LNCG (CG) LNCG (CG) LNCG (CG) LNCG (CG) *[khz], ±% G G G G G9 G GJ GQ GK RoHS Compliant. CORE LOSS CHARACTERISTICS CM choke Magnetic Path Length cm Outer Diameter Width Height.... Inductance Coefficient AL Value Idc=[A] Current*.. Current Ampere Turn [AT] G Core loss PFe [mw/g] [khz] [khz] [khz] [khz] [khz] [khz] [khz] Magnetic flux density Δ Bp-p [mt] CAT. No. ER
2 D.C. BIAS CHARACTERISTICS AL-AT() Frequency : [khz]. D.C. BIAS CHARACTERISTICS AL-AT() Frequency : [khz]. LNCG LNCG. LNCG AL []. LNCG LNCG AL []. LNCG LNCG LNCG LNC9G. LNCG NI [AT] NI [AT] MAGNETIC FIELD - MAGNETIC DENSI TY FREQUENCY - INDUCTANCE CHARAC TER IS TICS CM Core Magnetic flux density B [T].. Relative value [%] 9 Magnetic field H [A/m] Frequency f [khz] TEMPERATURE DEPENDENCE - INDUCTANCE AND CORE LOSS Frequency : [khz] Inductance, Core loss Relative value [%] Inductance Current Idc= [A] Core loss - Temperature [ ] CAT. No. ER
3 COIL STANDARD SPECIFICATIONS Coil Part No. (Old Coil Part No.) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) Current A Inductance * (khz) [A] Rating D D D.C.R. mω (max) W a L Maximum outer diameter : D(Vertical), D(Horizontal) Maximum width : W Total lead length : L=± Soldering boundary : a=.max *The bottom of the core or coil ( ) is defined as base surface. Winding φ lines. P. P.9 P. P.9 P. P. P.9 P. P.9 P. P. P. P. P.9 P. P. P. P. P. P. P * inductance tolerance :±%, the inductance at current [A] indicates the reference value. There is a horizontal putting type in all items in the above list."v"changes into "H" in last the third digit of the name of items. There is a type with the length putting seat in item in the above list."v" changes into "D" in last the third digit of the name of items. There are the type with the length putting seat and the horizontal putting seat in item. The type with the length putting seat is "V" changes into "B" in last the third digit of the name of items. *Order the auxiliary pins separately if they are required for the pedestal. Please select them according to the situation. D D W CAT. No. ER
4 COIL STANDARD SPECIFICATIONS Coil Part No. (Old Coil Part No.) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACM9G-VE (CM9GPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACM9G-VE (CM9GPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG9-VE (CMG9PBF) LACMG9-VE (CMG9PBF) LACMG9-VE (CMG9PBF) LACM9G9-VE (CM9G9PBF) LACMG9-VE (CMG9PBF) LACMG9-VE (CMG9PBF) LACMG9-VE (CMG9PBF) Current A Inductance * [A] 9 9 (khz) Rating D.C.R. mω (max) Winding φ lines.9 P. P. P.9 P.9 P. P. P. P. P. P. P. P. P. P. P. P. P. P. P. P.9 P. P. P. P. P D D W CAT. No. ER
5 COIL STANDARD SPECIFICATIONS Coil Part No. (Old Coil Part No.) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACM9G-VE (CM9GPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMG-VE (CMGPBF) LACMGJ-VE (CMGJPBF) LACMGJ-VE (CMGJPBF) LACMGJ-VE (CMGJPBF) LACMGJ-VE (CMGJPBF) LACMGJ-VE (CMGJPBF) LACMGJ-VE (CMGJPBF) LACMGJ-VE (CMGJPBF) LACMGQ-VE (CMGQPBF) LACMGQ-VE (CMGQPBF) LACMGQ-VE (CMGQPBF) LACMGQ-VE (CMGQPBF) LACMGK-VE (CMGKPBF) LACMGK-VE (CMGKPBF) LACMGK-VE (CMGKPBF) LACMGK-VE (CMGKPBF) LACMGK-VE (CMGKPBF) LACMGK-VE (CMGKPBF) LACMGK-VE (CMGKPBF) Current A Inductance * [A] 9 (khz) Rating 9 D.C.R. mω (max) 9 Winding φ lines. P. P. P. P. P. P. P.9 P. P. P. P. P. P. P. P. P. P. P. P. P. P. P. P. P. P D D W CAT. No. ER
6 D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] LACMG-VE LACMG-VE D.C. BIAS CHARACTERISTICS () Core : LNC9G, Frequency : [khz] LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] LACMG-VE LACMG-VE LACM9G-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE CAT. No. ER
7 D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] LACM9G-VE LACMG9-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG-VE LACMG9-VE LACMG9-VE LACMG9-VE LACM9G9-VE LACMG9-VE LACMG9-VE D.C. BIAS CHARACTERISTICS (9) Core : LNCG, Frequency : [khz] D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] LACMG-VE LACMG-VE LACMG-VE LACM9G-VE LACMG-VE LACMG-VE LACMG-VE LACMGJ-VE LACMGJ-VE LACMGJ-VE LACMGJ-VE LACMGJ-VE LACMGJ-VE LACMGJ-VE D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] D.C. BIAS CHARACTERISTICS () Core : LNCG, Frequency : [khz] LACMGK-VE LACMGQ-VE LACMGQ-VE LACMGQ-VE LACMGK-VE LACMGK-VE LACMGK-VE LACMGK-VE LACMGK-VE LACMGK-VE LACMGQ-VE CAT. No. ER
CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS
E nglish CERAMIC CAPACITORS VARISTORS FILM CAPACITORS CHOKE COILS CAT.NO.EX / EA / EU / ES NANOCRYSTALLINE / AMORPHOUS / DUST CHOKE COILS Production Guide P- Series Table/Global Code System/Coil Series
More informationEMC Components. HF Series Common-Mode Choke Coils for AC Power Supply Closed Magnetic Circuit, High Impedance
(/5) FEATURES Comprising double-square closed magnetic circuit ferrite cores and windings on partitioned bobbins, these common-mode choke coils are useful for noise suppression. With the small size and
More informationApplications SSHB 10 HS- R Core Type
AC Line Filters Dual Mode SSHB Coils, 10HS Series, Wide Range Impedance Type Overview The KEMET SSHB coils are dual mode chokes with a wide variety of characteristics. These hybrid coils combine the two
More informationApplications SSHB 21 HS- R Core Type
AC Line Filters Dual Mode SSHB Coils, 21HS Series, Wide Range Impedance Type Overview The KEMET SSHB coils are dual mode chokes with a wide variety of characteristics. These hybrid coils combine the two
More informationCommon Mode Chokes BU Series
Document 60- Common Mode Chokes BU Series These low cost, high performance choke coils are designed to virtually eliminate line conducted common mode noise. The BU9S and BU9HS families are ideal for signal
More information-Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the 'C' dimension of the toroid.
Part Number: 5978014001 Frequency Range: Medium Permeability, 77 (ui=2000) & 78 (ui=2300) materials Description: Application: Where Used: Part Type: 78 TOROID Inductive Components Closed Magnetic Circuit
More informationLarge Kool Mµ Core Shapes
Large Kool Mµ Core Shapes TECHNICAL BULLETIN Ideal for high current inductors, large Kool Mµ geometries (E cores, U Cores and Blocks) offer all the advantages of Kool Mµ material, low core loss, excellent
More informationTransformers. Objectives
Transformers Objectives Explain mutual inductance Describe how a transformer is constructed and how it works Explain how a step-up transformer works Explain how a step-down transformer works Discuss the
More informationHigh power density, high efficiency, low profile shielded drum core power inductors
Supersedes pril 2014 High power density, high efficiency, low profile shielded drum pplications Notebook power LCD panels Desktop and servers DVD players and portable power devices DC-DC Converters Buck,
More informationLarge Kool Mµ Core Shapes
Large Kool Mµ Core Shapes TECHNICAL BULLETIN Ideal for high current inductors, large Kool Mµ geometries (E cores, U Cores and Blocks) offer all the advantages of Kool Mµ material, low core loss, excellent
More informationTopic 4 Practical Magnetic Design: Inductors and Coupled Inductors
Topic 4 Practical Magnetic Design: Inductors and Coupled Inductors Louis Diana Agenda Theory of operation and design equations Design flow diagram discussion Inductance calculations Ampere s law for magnetizing
More information-Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the 'C' dimension of the toroid.
Part Number: 5967001701 Frequency Range: Low Permeability, 67 (ui=40) material Description: Application: Where Used: Part Type: 67 TOROID Inductive Components Closed Magnetic Circuit Toroids Mechanical
More informationCommon Mode Choke Coils(Line Filters)
Common Mode Choke Coils(Line Filters) For power line, Closed magnetic circuit core type HF Series Type: Vertical type HF36/HF38 /HF9 For large inductance HF04/HF4/HF430/HF86/HF836/HF3545 Issue date: December
More informationNoise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC
Power Choke Coil (Automotive Grade) Series: PCC-M8M-LE(MC) PCC-M78M-LE(MC) High heat resistance and high reliability Using metal composite core (MC) Industrial Property : patents 3 (Registered /Pending
More information(TPUTX) SMD Power Wire wound Toroidal Inductors. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TPUTX) SMD Power Wire wound Toroidal Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu
More informationLarge Kool Mµ Core Shapes
Large Kool Mµ Core Shapes Technical Bulletin Ideal for high current inductors, large Kool Mµ geometries (E cores, Toroids, U Cores and Blocks) offer all the advantages of Kool Mµ material, low core loss,
More informationMAGNETIC PRODUCTS. SMD Beads and Chokes
MAGNETIC PRODUCTS SMD Beads and Chokes Philips Components Magnetic Products SMD beads in tape November 1994 2 Magnetic Products Philips Components Contents page SMD Beads 8 SMD Common Mode Chokes 14 SMD
More informationApplications. Overview. Benefits. Part Number System. AC Line Filters Common Mode SSRH Coils, 24NVS/NHS, Wide Range Impedance Type
AC Line Filters Common Mode SSRH Coils, 24NVS/NHS, Wide Range Impedance Type Overview The KEMET SSRH24NV/NH coils are common mode chokes with a wide variety of characteristics. These gear type coils are
More informationApplications. Overview. Benefits. Ordering Information. Pulse Transformers Device for HD-PLC, PLT Series
Pulse Transformers Device for HD-PLC, PLT Series Overview The KEMET PLT pulse transformers are common mode choke coils suitable for Power Line Communication (PLC). Designed with our proprietary ferrite
More information86 chapter 2 Transformers
86 chapter 2 Transformers Wb 1.2x10 3 0 1/60 2/60 3/60 4/60 5/60 6/60 t (sec) 1.2x10 3 FIGURE P2.2 2.3 A single-phase transformer has 800 turns on the primary winding and 400 turns on the secondary winding.
More informationApplications SSR 21N VS Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 21NVS/NHS, Wide Range Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed
More informationApplications SSR 21N V-M Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 21NV-M/NH-M, High Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with
More information-Thermo-set plastic coated parts can withstand a minimum breakdown voltage of 1000 Vrms, uniformly applied across the 'C' dimension of the toroid.
Fair-Rite Product's Catalog Fair-Rite Products Corp. PO Box J,One Commercial Row, Wallkill, NY 12589-0288 Part Number: 5977011101 Frequency Range: Medium Permeability, 77 (ui=2000) & 78 (ui=2300) materials
More informationInductors for Power Circuits
Inductors for Power Circuits Wound/STD magnetic shielded RLF series Type: RLF7030 (7.3x6.8 mm) RLF12545 (12.5x12.8 mm) RLF12560 (12.5x12.8 mm) Issue date: September 2011 (1/6) Inductors for Power Circuits
More informationApplications SSR 10 V Core Orientation and Bobbin Type
AC Line Filters Common Mode SSR Coils, 10VS/HS, Wide Range Impedance Type Overview The KEMET SSR coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed
More informationAPPENDIX 4 TYPICAL LAYOUT, VALUES AND CONSTANTS
109 APPENDIX 4 TYPICAL LAYOUT, VALUES AND CONSTANTS TYPICAL LAYOUT The purpose of a transformer is to transfer energy from the input to the output through the magnetic field. The layout of a partial typical
More informationApplications SSRH 7 HS-M Core Orientation and Bobbin Type
AC Line Filters Common Mode SSRH Coils, 7HS-M, Wide Range Impedance Type Overview The KEMET SSRH7H-M coils are common mode chokes with a wide variety of characteristics. These low current and high inductance,
More informationSurface mount Power Inductors
Surface mount Power Inductors Non Shielded Inductor / Wire wound Inductors Coilmaster Electronics Co., Ltd. Headquarters: 9F-3 No.398, Huan Bei Road, Chung Li City, Taoyuan 320, Taiwan,ROC TEL: 886-3-4228279;
More informationDR1050 Shielded power inductors
Shielded power inductors Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Graphics cards and battery powered systems Point-of-load
More informationCOMPLIANT Common Mode Chokes - UU9.8 & UU10.5 Series
Document FR00 COMPLIANT Common Mode Chokes - UU9.8 & UU0.5 Series Order Code MCU 000 MCU 0002 Core Mounting Inductance mh (Min) UU9.8 Series Current Rating ma (steady state) 350 350 Leakage DC Inductance
More information(TC19) Micro Gap Power Toroidal Inductor
Version: February 28, 2017 Electronics Tech. (TC19) Micro Gap Power Toroidal Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing
More informationDR1030 Shielded power inductors
Supersedes March 2007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Notebook and laptop regulators Graphics cards and battery
More informationTelemetrie-Messtechnik Schnorrenberg
Telemetrie-Messtechnik Schnorrenberg MTP-IND-PWR User Manual Inductive power supply set Power supply for power head 25 and 50mm mounting tape to fix coil on shaft Ferrite tape 30mmx3m CUL 1.00 mm (Enamelled
More informationDR1040 Shielded power inductors
Shielded power inductors Supersedes March 007 Applications LED/LCD backlighting High definition televisions (HDTV) Server and desktop power supplies Portable electronics Graphics cards and battery powered
More informationdiscontinued October 31, 2017 or until inventory is
Supersedes June 2017 Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and resonant converters Noise filtering and filter chokes
More informationFP1005R High frequency, high current power inductors
Supersedes December 2008 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU) Graphics
More informationINDEX HOESUNG COIL PARTS
INDEX HOESUNG COIL PARTS 1. Metal Molding High Current SMD Power Inductor PART NO DEMINSION(mm) Inductance Range Rated DC Current Page MMI 06518 SERIES 6.5 7.1 1.8 1.0uH ~ 4.7uH 9.8A ~ 5.0A 5 MMI 06524
More informationP7605 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7605 Family Features Lead-free (Pb-free) RoHS compliant High Current (Saturation to 20A) Low DCR (to 9mΩ) Low profile (to
More informationFP1309B High frequency, high current power inductors
Technical Data 10477 High frequency, high current power inductors Applications Servers Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) Server and desktop Central processing unit (CPU)
More informationMagnetics Design. Specification, Performance and Economics
Magnetics Design Specification, Performance and Economics W H I T E P A P E R MAGNETICS DESIGN SPECIFICATION, PERFORMANCE AND ECONOMICS By Paul Castillo Applications Engineer Datatronics Introduction The
More informationSMD Shielded Wire Wound Power Inductor. TIS4D28QES Series. Features. Applications. Dimensions
SMD Shielded Wire Wound Power Inductor SMD Shielded Wire Wound Power Inductor Features Magnetically shielded construction Compact and thin Large current and low DCR RoHS Compliant Applications DC-DC converter
More informationShielded Power Inductors
Shielded Power Inductors MN509 Shielded inductor with minimum EMI Minimum power loss Non standard values available Low DC resistance Flat top for SMT operations Specifications Inductance tested at 100KHz
More informationMagnetics Product Roundup
ISSUE: March 2010 This Magnetics Product Roundup highlights recently introduced transformers, inductors, chokes, cores, and magnetics design software suitable for power electronics applications. Table
More informationTUTORIAL Inductor Database in the Thermal Module
TUTORIAL Inductor Database in the Thermal Module October 2016 1 A typical inductor consists of three main parts: core, bobbin (also called coil former), and winding, as shown below. To construct an inductor
More informationIron Powder Core Selection For RF Power Applications. Jim Cox Micrometals, Inc. Anaheim, CA
HOME APPLICATION NOTES Iron Powder Core Selection For RF Power Applications Jim Cox Micrometals, Inc. Anaheim, CA Purpose: The purpose of this article is to present new information that will allow the
More informationFP2207R High frequency, high current power inductors
Technical Data 10673 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and highpower density VRMs Server and desktop Central processing
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 1 High Current, Power Inductors MPCA-63-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 7.3x6.8x 3.mm maximum surface mount package Powder iron core material
More informationdiscontinued October 31, 2017 or until inventory is
Technical Data DS4314 Supersedes June 2017 ECONO-PAC /OCTA-PAC OCTA-PAC PLUS Applications Computer and portable power devices LCD panels, DVD players Inductor: DC-DC converters Buck, boost, forward, and
More informationNoise fi lter for various drive circuitry requiring high temp. operation and peak current handling capability Boost-Converter, Buck-Converter DC/DC
Power Choke Coil for Automotive application Series: PCC-MM-LP(MC) PCC-MM-LP(MC) PCC-MM-LP(MC) PCC-MM-LP(MC) High heat resistance and high reliability Using metal composite core (MC) Industrial Property
More informationKun Shan MAZO tech Co., Ltd
Page : 1/9 High Current, Power Inductors LPCA-14-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 11.5x1.3x 4.mm maximum surface mount package Powder iron core material
More information2.0 EMI INTERFERENCE SUPPRESSION AND EMC ELECTROMAGNETIC COMPATIBILITY
SMD Beads and Chokes Introduction 1 INTRODUCTION To support designers and manufacturers of electronic circuitry, FERROX- CUBE manufactures a comprehensive line of ferrite EMI-suppression products for use
More informationTUTORIAL Inductor Loss Calculation in Thermal Module
TUTORIAL Inductor Loss Calculation in Thermal Module October 2016 1 The Thermal Module provides the capability to calculate the winding losses, core losses, and temperature rise of inductors based on standard
More information(TCLP/TCVP) SMD Power Wire wound Toroidal Inductor
Version: February 28, 2017 Electronics Tech. (TCLP/TCVP) SMD Power Wire wound Toroidal Inductor Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong
More informationFP1008R7 High frequency, high current power inductors
Technical Data 1629 Effective December 216 FP18R7 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density VRMs
More informationFERRITE CORES 2012 CATALOG
FERRITE CORES 2012 CATALOG Part Number Index TOROIDS E CORES SHAPES TOROID PG TOROID PG 40200TC 16 43610TC 20 40301TC 16 43615TC 20 40401TC 16 43620TC 20 40402TC 16 43806TC 20 40502TC 16 43813TC 20 40503TC
More informationECONO-PAC /OCTA-PAC OCTA-PAC PLUS Power Inductors and Transformers
Description Surface mount magnetics that can be used as single or coupled inductors or 1:1 transformers that provide isolation between two windings OCTA-PAC s are designed around high frequency, low loss
More information(TCTC) High Current Toroidal Inductors
Version: September 6, 2017 Electronics Tech. (TCTC) High Current Toroidal Inductors Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry
More informationKun Shan MAZO tech Co., Ltd
Page : 1 / 8 High Current, Power Inductors MPCA-412-XXX-M Power Choke Description Halogen Free 125 C maximum total temperature operation 4.75 x 4.45 x 1.2mm maximum surface mount package Powder iron core
More informationFerrite EMI Noise Filtering
Ferrite EMI Noise Filtering SOLUTIONS About Laird Technologies Laird Technologies is a global market leader in the design and supply of electromagnetic interference (EMI) shielding, thermal management
More informationPlanar Transformer Prototyping Kit. Designer s Kit C356
Planar Transformer Prototyping Kit Designer s Kit C Contents Introduction... Kit Contents... Part Details... Core... Primary Boards... Secondary Stamps... Auxiliary Boards... Pins and Insulators... Designing
More informationShielded SMD Power Inductor
101 Features Dimensions Unit: mm -Directly connected electrode on ferrite core -Available in magnetically shielded -Low DC resistance -Suitable for large current -Available on tape and reel for auto surface
More information(TPSTX) SMD Compact Power Toroidal Inductors
Version: July 31, 2017 Electronics Tech. (TPSTX) SMD Compact Power Toroidal Inductors Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing
More informationABB September Slide 1
Magdalena Puskarczyk, Radoslaw Jez, ABB Corporate Research Center, Krakow, Poland The Design of a Multilayer Planar Transformer for a DC/DC Converter with a Resonant Inverter Slide 1 The Design of a Multilayer
More informationLooking for magnetic parts? Low Permeability Nanocrystalline Cores Nanophy. Material on design Permeability on demand
Looking for magnetic parts? kµ cores Low Permeability Nanocrystalline Cores Nanophy Stainless & Nickel Alloys Components Material on design Permeability on demand Permeability range from 2 to 3 Material
More informationGapped ferrite toroids for power inductors. Technical Note
Gapped ferrite toroids for power inductors Technical Note A Y A G E O C O M P A N Y Gapped ferrite toroids for power inductors Contents Introduction 1 Features 1 Applications 1 Type number structure 1
More informationSunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS
Sunlord Wire Wound SMD Power Inductor Page 1 of 7 SPECIFICATIONS Customer Product Name Wire Wound SMD Power Inductor Sunlord Part Number SWPA4020S T Customer Part Number [ New Released, Revised] SPEC No.:
More informationHCV1605 High current power inductors
Technical Data 188 High current power inductors pplications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55 C to
More informationRhombus Industries Inc.
NEW! FOR '97 MAGNETIC COMPONENTS INDUCTORS, COILS & SMPS MAGNETICS PRODUCTS INCLUDE... CURRENT SENSE POWER LINE CHOKES HASH CHOKES COMMON MODE MAG AMP TOROIDS POWER INDUCTORS SWING INDUCTORS HIGH L AIR
More informationMAGNETIC POWDER CORES
Ver.13 www.changsung.com MAGNETIC POWDER CORES Innovative Technological Advancements Move forward with Chang Sung Corporation. We are one of the main suppliers of cutting edge products to all our customers
More informationApplications SC JS. Series Rated Current AC (A) Inductance (mh) Minimum Terminal Base Type 0x- = x A. x0 = x mh xx = x.x mh 0x = 0.
AC Line Filters Common Mode SC Coils, SC-JS Series, Terminal Base Type Overview The KEMET SC-JS coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with
More informationInduction heating of internal
OPTIMAL DESIGN OF INTERNAL INDUCTION COILS The induction heating of internal surfaces is more complicated than heating external ones. The three main types of internal induction coils each has its advantages
More information(TPSDC) SMD Low-DCR Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TPSDC) SMD Low-DCR Power Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
More informationGLOSSARY OF TERMS FLUX DENSITY:
ADSL: Asymmetrical Digital Subscriber Line. Technology used to transmit/receive data and audio using the pair copper telephone lines with speed up to 8 Mbps. AMBIENT TEMPERATURE: The temperature surrounding
More informationMagnetics. Important relationships. Magnetic quantities Analogies to electrical quantities
Mor M. Peretz, Switch-Mode Power Supplies [3-1] Faraday s and Amper s laws Permeability Inductor Reluctance model Air gap Current crowding Inductor design Skin effect, proximity effect Losses Transformer
More informationSMALLER-FASTER- OW R CO$T
SMALLER-FASTER- OW R CO$T Magnetic Materials for Today s High-Power Fast-Paced Designs Donna Kepcia Technical Sales Manager Magnetics DISCUSSION OVERVIEW Semiconductor Materials, SiC, Silicon Carbide &
More informationHCV1707 High current power inductors
Technical Data 10712 High current power inductors Applications Compatible with Picor Cool-Power ZVS Buck and Buck-Boost Regulator Families Environmental data Storage temperature range (Component): -55
More informationNotice for TAIYO YUDEN Products
Notice for TAIYO YUDEN Products [ For General Electronic Equipment (General Environment) ] Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is
More informationHCM1707. High current power inductors. Technical Data Applications
Supersedes August Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-load modules Desktop and server VRMs and EVRDs Data networking and storage systems Base station equipment Battery
More informationHCM1A1305 Automotive grade High current power inductors
Technical Data Effective September HCMA Automotive grade High current power inductors Product features AEC-Q Grade qualified High current carrying capacity Magnetically shielded, low EMI Frequency range
More informationJanuary Inductors for Power Circuits. Wound Ferrite. SLF Series. SLF7045 Type SLF7045
January 2015 Inductors for Power Circuits Wound Ferrite SLF Series SLF7045 (2/9) REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS
More informationSurface Mount Wideband RF
Document 9- Surface Mount Wideband RF Tapped and untapped versions V interwinding isolation, / Watt RF input power ma max current rating. Typical Frequency Response Part db db db number (MHz) (MHz) (MHz)
More informationMethods for Reducing Leakage Electric Field of a Wireless Power Transfer System for Electric Vehicles
Methods for Reducing Leakage Electric Field of a Wireless Power Transfer System for Electric Vehicles Masaki Jo, Yukiya Sato, Yasuyoshi Kaneko, Shigeru Abe Graduate School of Science and Engineering Saitama
More informationApplications SC JH. Series Rated Current AC (A) Inductance (mh) Minimum Terminal Base Type x0- = x0 A xx- = xx A. x0 = x mh xx = x.
AC Line Filters Common Mode SC Coils, SC-JH Series, Terminal Base Type Overview The KEMET SC-JH coils are common mode chokes with a wide variety of characteristics. These toroidal coils are designed with
More informationHP1, HPH1 HP2, HPH2 HP3, HPH3 HP4, HPH4 HP5, HPH5 HP6, HPH6. Winding Layout. Middle 11. Inner
Document - HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH HP, HPH Six : isolated windings that can be connected in series or parallel Tightly coupled windings Power range: 0 Watts as inductor and flyback transformer;
More informationR. W. Erickson. Department of Electrical, Computer, and Energy Engineering University of Colorado, Boulder
R. W. Erickson Department of Electrical, Computer, and Energy Engineering University of Colorado, Boulder 13.2.3 Leakage inductances + v 1 (t) i 1 (t) Φ l1 Φ M Φ l2 i 2 (t) + v 2 (t) Φ l1 Φ l2 i 1 (t)
More informationHCMA0703 Automotive grade High current power inductors
Automotive grade High current power inductors Supersedes August 2014 Description Automotive grade 3 qualified High current carrying capacity, low core losses Magnetically shielded, low EMI Frequency range
More informationHCM1104 High current power inductors
Technical Data 4370 High current power inductors Supersedes September 2017 Applications Voltage Regulator Module (VRM) Multi-phase regulators Point-of-Load modules Desktop and server VRMs and EVRDs Base
More informationSMD Pulse Transformer for Ethernet Applications. The New Reference LAN Pulse Transformer
Fascinating, Fast, Accurate Communication SMD Pulse Transformer for Ethernet Applications ALT Series The New Reference Pulse Transformer In recent years, connectors have become standard equipment not only
More informationSMD Pulse Transformer for Ethernet Applications. The New Reference LAN Pulse Transformer
Fascinating, Fast, Accurate Communication SMD Pulse Transformer for Ethernet Applications ALT4532 Series The New Reference Pulse Transformer In recent years, connectors have become standard equipment not
More informationSelecting Magnetics for High Frequency Converters Practical Hints and Suggestions for Getting Started. Industry Session on Magnetics APEC 2016
Practical Hints and Suggestions for Getting Started Industry Session on Magnetics APEC 2016 The Challenge: Hypothetically, a small- to medium-sized power converter manufacturer with limited resources is
More information(TPSLF) SMD Wire Wound Power Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TPSLF) SMD Wire Wound Power Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More information(TPUD) SMD Low-Profile Wirewound Inductors. Token Electronics Industry Co., Ltd. Version: January 16, Web:
Version: January 16, 2017 (TPUD) SMD Low-Profile Wirewound Inductors Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationSMD Power Inductors. Features: Applications: Figure 1. Figure 2. Page <1> 20/06/11 V1.1
Features: Ferrite based SMD inductor with lower core loss. Ideal for LCD driver, DSC/DVC, Notebook PC or High density board design. Operating temperature range -55 C to + 130 C. MCSDRH73B - Series High
More information(TRAM) Surface Mount Spring RF Inductor. Token Electronics Industry Co., Ltd. Version: January 13, Web:
Version: January 13, 2017 (TRAM) Surface Mount Spring RF Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More informationApplications HHBC 8S- 0R6 A 0024 V. Wire Diameter (mm) Windings. R = Decimal point. A = Single B = Double
AC Line Filters Normal Mode Coils, HHBC (Fe-Si) Overview The KEMET HHBC coils are normal mode chokes with a wide variety of characteristics. These coils are designed with Fe-Si dust cores and are useful
More informationMPI40-V2 High current, low profile, miniature power inductors
Applications Handheld/mobile devices Portable media players Notebook/netbook/laptop regulators Tablets/smartbooks Battery operated devices LED drivers LCD displays Point-of-load (POL) converters Product
More informationSMALLER-FASTER- OW R CO$T
SMALLER-FASTER- OW R CO$T Magnetic Materials for Today s High-Power Fast-Paced Designs Donna Kepcia Technical Sales Manager Magnetics DISCUSSION OVERVIEW Semiconductor Materials, SiC, Silicon Carbide &
More informationApplications SS 30 V- R
AC Line Filters Common Mode SS Coils, 0V Series Overview The KEMET SS coils are common mode chokes with a wide variety of characteristics. These gear type coils are designed with our proprietary ferrite
More informationChallenges to Improving the Accuracy of High Frequency (120MHz) Test Systems
Challenges to Improving the Accuracy of High Frequency (120MHz) Test Systems Applied Power Electronics Conference March 25 th, 2017 Tampa, USA Zoran Pavlovic, Santosh Kulkarni, Satya Kubendran, Cristina
More informationSD3118 Low profile power inductors
SD38 Low profile power inductors Supersedes November 009 pplications Mobile/smart phones Tablets/e-readers Media players Digital cameras Small LED driver and LCD displays Handheld/mobile equipment Description
More information