Signal Relays AXICOM. IM Relay

Size: px

Start display at page:

Download "Signal Relays AXICOM. IM Relay"

Gordon Thornton
6 years ago
Views:

1 Signal s IM n Slim line 0x6mm, low prile 5.65mm and min. board-space 60mm n Switching current /5A, switching power 60/6.5VA and switching voltage 0VDC/50VAC n Low coil power consumption, 40m standard, 00m high sensitive, 50m ultra high sensitive and 00m bistable n High dielectric and surge capability up 500Vrms between open contacts and 500Vrms between coil and contacts n High mechanical shock resistance up 50g functional Typical applications Telecommunication, access and mission equipment, optical network terminals, modems, fice and business equipment, consumer electronics, measurement and test equipment, industrial control, medical equipment, HVAC Approvals UL 508 File No. E 44 Technical data approved types on request Contact Data standard, C D, I P standard and high high contact high dielectric current stability Contact arrangement m C, CO Max. switching voltage 0VDC, 0VDC, 0VDC, 50VAC 50VAC 50VAC Rated current A 5A A Limiting continuous current A 5A A Switching power 60, 6.5VA Contact material PdRu AgNi PdRu +Au +Au +Au covered covered covered Contact style twin cont. twin cont. twin cont. I: single contacts Minimum switching voltage 00µV Initial contact resistance <50mΩ at 0mA/0mV I: < 00mΩ Thermoelectric potential <0µV Operate time typ. ms, max. ms Release time without diode in parallel typ. ms, max. ms with diode in parallel typ. ms, max. 5ms Bounce time max. typ. ms, max. 5ms Max. DC load breaking capacity DC Voltage [Vdc] DC current [A] resistive load Contact Data (continued) Electrical endurance at contact application 0 ( 0mV/ 0mA) cable load open end resistive, 5VDC / 0.4A - 0 resistive, 0 VDC / 0.7A - 60 resistive, 50VAC / 0.5A - 6.5VA resistive, 0VDC / A - 0 resistive, 0VDC / A - 60 UL contact rating Mechanical endurance Coil Data Magnetic system Coil voltage range min..5x0 6 operations min..0x0 6 operations min. 5x0 5 operations min. x0 5 operations min. x0 5 operations min. 5x0 5 operations min. x0 5 operations 0VDC, A, 60, NO only 0VDC, 0.A, 0VDC, 0.7A, 60 5VAC, 0.5A, VAC, 0.5A, operations monostable, bistable.5 4VDC Coil s, standard, monostable, coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±0% m All figures are given coil without pre-energization, at ambient temperature + C Coil operating range, standard Coil Voltage [U/Unom] Umax. at xa Umax. at xa Unom. nominal coil voltage Urel. min. 40m coil 00m coil U Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at Ambient Temperature [ C] are

2 Signal s IM (Continued) Dimensions ÊSignalÊs IM Pole Changeo Coil Data (continued) Coil s, sensitive, monostable, coil L Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power H VDC VDC VDC Ω±0% m T T D Coil s, ultra high sensitive, monostable, coil S Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±0% m All figures are given coil without pre-energization, at ambient temperature + C Coil operating range, sensitive and ultra high sensitive coil Coil Voltage [U/Unom] Unom. nominal coil voltage Corporation, Umax. at xa Umax. at xa Uop min. Urel. min. 50m coil 00m coil only ger with Definitions section. IMÊTHT IMÊTHT Insulation Data standard* C* D,P, I mm inch mm inch mm standard, high high current, 0.00Ê± sensitive, dielectric high contact 6.00Ê±Ê0.08 ÊÊ6.00Ê ultra high stability ÊÊ5.65Ê sensitive 7.50Ê±Ê Initial dielectric strength 0Ê±Ê Ê±Ê between open contacts 000V rms 500V rms 750V rms 0Ê±Ê between contact and coil 800V rms 800V rms 500V rms.0ê±ê between 0 adjacent contacts 000V rms 800V rms 750V rms Initial surge withstand voltage 0.09 between open contacts 500V 500V 000V between contact and coil 500V 500V 000V between adjacent contacts 500V 500V 000V Initial insulation resistance between insulated elements >0 9 Ω >0 9 Ω >0 9 Ω Capacitance between open contacts max. pf between contact and coil max. pf between adjacent contacts max. p RF Data Isolation at 00MHz/900MHz 7.0dB/8.8dB Insertion loss at 00MHz/900MHz 0.0dB/0.dB Voltage standing wave ratio (VSR) at 00MHz/900MHz.06/ Ambient Temperature [ C] Or Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Coil s, standard, bistable coil refer Product Compliance Support Center at Coil Rated Set Reset Coil Rated coil /cusmersupport/rohssupportcenter code voltage voltage voltage resistance power Ambient temperature -40 C +85 C VDC VDC VDC Ω±0% m Thermal resistance <50K/ Category environmental protection IEC 680 RT V - hermetically sealed Vibration resistance (functional) 0g, 0 500Hz Shock resistance (functional), half sinus ms 50g Shock resistance (destructive), half sinus 0.5ms 500g position any eight max. g Resistance soldering heat IEC All figures are given coil without pre-energization, at ambient temperature + C Moisture sensitive level, JEDEC J-Std-00D MSL Coil operating range, bistable coil related only relays packed in orginal dry-packs Coil Voltage [U/Unom] Umax. - 00% coil duty at 0A (00m) Umax. - 00% coil duty at 0A (00m) Unom. nominal coil voltage Ambient Temperature [ C] Umax. - 5%coil duty at xa (00m) Uset min. 00 m 00 m Umax.-5%coil duty at 0A(00m) Umax.-5%coil duty at 0A (00m) Umax. -5% coil duty at xa (00m) THT *this relay contains SF6 (Sulfur hexafluoride, CAS number: ) dielectric strength enhancement, SF6 is hermetically sealed in relay without leaks air during normal application as recommended per applicable product specification. It is clarified that usage SF6 in mini signal relay is not prohibited by related regulations. Please contact TE local sales or field engineer furr inmation and detailed material declaration. Ultrasonic cleaning Packaging/unit THT Monostable rest not not recommended tube/50pcs., box/000 pcs. reel/000 pcs., box/000 or 5000 pcs. Bistable, coil o ±0. Contacts are shown in. Contact position might change during portation and must be bee use. Copla i m use. Datasheets and product data is Datasheets, product data, Definitions section, terms disclaimer and all chapters Definitions section, available at are 0.

3 T TT LLT L T T 6.00Ê±Ê Ê±Ê Ê±Ê0.08 0Ê±Ê Ê±Ê0.08 0Ê±Ê0.0 0Ê±Ê0.0 0Ê±Ê0.0 HH H ÊÊ ÊÊ ÊÊ ÊÊ TD TD TD T T 0 0 T 0 0 0Ê±Ê0.0 0Ê±Ê0.0 0Ê±Ê0.0 S 0.09 S Ê±Ê0.0 S 0.09 D D D SS S Signal s ±0.±0. ±0. ±0. layout TOP on wings J-legs Processing J-legs ±0. ±0.±0. ±0. wings THT Dimensions THTTHT THT IM (Continued) THTTHT THT T LT H TD T S D S soldering s Recommended Recommended reflow soldering prile IEC Coil Resistance soldering heat - reflow prile IEC not not not not Coil not not not not inê inê inê inê - -- inê inê inê inê use. use. use. use All specifications All specifications use. use. use.use. Recommended soldering s Vapour phase soldering 0 40s 40 C All specifications full line: typical dotted line: process limits Temperature [ C] 80 C 0 C external preheating 00 C ced cooling Vapour phase soldering temperature/time prile (lead and housing peak temp.) Time [s] 05 Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at are

4 Signal s IM (Continued) Tub 50 r,00 Packing Tube THT 50 relays per tube, 000 relays per box Tape and reel 000 relays per reel, 000 or 5000 relays per box Tape and reel,000 relays per reel,000 or 5,000 relays per box Reel Dimension Reel Dimension Reel dimensions Tap,00,00 Reel Dimension Product code structure Typical product code IM 0 G R IM Signal s IM Series Contact arrangement Blank m C, CO Coil Coil code: please refer coil s table Permance type Blank I High current single contact C High dielectric D High current P High contact stability s T THT - standard J - J-leg N THT - narrow G - gull wing Packing S Tube R Reel 4 05 Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at are

5 Signal s IM (Continued) Product code Arrangement Perf. type Coil Coil type Coil s Part number IM00GR m C,.5VDC Monostable gull wing IM00JR CO J-leg IM00NS contacts THT narrow IM0GR VDC gull wing IM0JR J-leg IM0NS THT narrow IM0TS THT standard IM0GR 4.5VDC gull wing IM0JR J-leg IM0NS THT narrow IM0GR 5VDC gull wing IM0JR J-leg IM0NS THT narrow IM0TS THT standard IM04GR 6VDC gull wing IM04JR J-leg IM04NS THT narrow IM05GR 9VDC gull wing IM05JR J-leg IM05NS THT narrow IM05TS THT standard IM06GR VDC gull wing IM06JR J-leg IM06NS THT narrow IM07GR 4VDC gull wing IM07JR J-leg IM07NS THT narrow IM08GR VDC gull wing IMGR VDC High sens IMGR 4.5VDC IMGR 5VDC IM6GR VDC IM7GR 4VDC IM7TS THT standard *IMGR VDC Ultra gull wing *IMTS high THT standard *IMGR 4.5VDC sensitive gull wing *IMTS THT standard *IMGR 5VDC gull wing *IMTS THT standard *IM6GR VDC gull wing *IM6TS THT standard IM40GR.5VDC Bistable gull wing IM40JR J-leg IM40NS THT narrow IM40TS THT standard IM4GR VDC gull wing IM4JR J-leg IM4NS THT narrow IM4TS THT standard IM4GR 4.5VDC gull wing IM4JR J-leg IM4NS THT narrow IM4TS THT standard IM4GR 5VDC gull wing IM4JR J-leg IM4NS THT narrow IM4TS THT standard IM44GR 6VDC gull wing IM44JR J-leg IM44NS THT narrow IM44TS THT standard IM45GR 9VDC gull wing IM45JR J-leg IM45NS THT narrow IM46GR VDC gull wing IM46JR J-leg IM46NS THT narrow IM46TS THT standard IM47GR 4VDC gull wing IM47JR J-leg IM47NS THT narrow IM47TS THT standard * please check with application first furr details 05 Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at are 5

6 Signal s IM (Continued) Product code Arrangement Perf. type Coil Coil type Coil s Part number IM48GR VDC gull wing IM0CGR m C High VDC Monostable gull wing IM0CTS CO dielectric THT standard IM0CGR contacts 4.5VDC gull wing IM0CGR 5VDC IM0CJR J-leg IM0CTS THT standard IM05CGR 9VDC gull wing IM06CGR VDC IM06CJR J-leg IM06CTS THT standard IM07CGR 4VDC gull wing IM07CTS THT standard IM7CGR High sens. gull wing IM4CGR VDC Bistable IM4CGR 4.5VDC IM4CGR 5VDC IM48CGR VDC IM0DGR High 4.5VDC Monostable IM0IJR current J-leg IM0IGR gull wing IM0DGR 5VDC gull wing IM0DJR J-leg IM05DGR 9VDC gull wing IM06DGR VDC IM06DJR J-leg IM06DTS THT standard IM07DGR 4VDC gull wing IM07DJR J-leg IM07DTS THT standard IMDTS 4.5VDC U.h.sens IM4DGR VDC Bistable gull wing IM4DGR 4.5VDC IM4DNS THT narrow IM46DNS VDC IM47DJR 4VDC J-leg IM48DGR VDC gull wing IM49DGR VDC IM40IGR.5VDC IM48IGR VDC IM49IGR VDC IM0PGR High 4.5VDC Monostable IM0PNS contact THT narrow IM0PGR stability 5VDC gull wing IM0PJR J-leg IM0PNS THT narrow IM06PGR VDC gull wing IM06PNS THT narrow IM4PGR 4.5VDC Bistable gull wing IM4PNS THT narrow IM4PGR gull wing IM46PNS VDC THT narrow Corporation, only ger with Definitions section. Datasheets and product data is terms disclaimer and all chapters Definitions section, available at are

RF Signal Relays AXICOM. HF3 Relay

RF Signal Relays AXICOM. HF3 Relay HF3 Relay n Y-Design n Frequency range DC to 3GHz n Impedance 50Ω or 75Ω n Small dimensions (14.6x7.2x10mm) n 1 form C contact (1 changeover contact) n Immersion cleanable n Low power consumption ( 140mW)