Compact Relay Family with Forcibly Guided Contacts

Size: px

Start display at page:

Download "Compact Relay Family with Forcibly Guided Contacts"

Horatio Greer
5 years ago
Views:

Compact Relay Family with Forcibly Guided Contacts SF-Y RELAYS -pole ( Form A Form B, Form A Form B) -pole ( Form A Form B, 5 Form A Form B) RoHS compliant FEATURES.

1 Compact Relay Family with Forcibly Guided Contacts SF-Y RELAYS -pole ( Form A Form B, Form A Form B) -pole ( Form A Form B, 5 Form A Form B) RoHS compliant FEATURES. Forcibly guided contact structure Relay complies with EN 5005, Type A Equipped with forcibly guided contact structure that enables detection of contact welding and construction of safety circuit.. Small size. Different contact configurations: Type L W H (mm inch) Form A Form B, Form A Form B Form A Form B, 5 Form A Form B Low profile:.5 mm.57 inch 5. Insulation according to EN 0-: Overvoltage category III, Pollution degree, 50V AC Reinforced insulation: Clearance and creepage 5.5 mm.7 inch (between all contacts and between contact NO and coil) Basic insulation: Clearance mm. inch and creepage mm.57 inch (between all contacts and between contact NC and coil) TYPICAL APPLICATIONS. Emergency stop switches. Machine safety engineering. Safety control units. Automation technology 5. Elevators. Escalators 7. Overcurrent protection with monitor contact ORDERING INFORMATION Contact arrangement : Form A Form B : Form A Form B : Form A Form B 5: 5 Form A Form B Nominal coil voltage DC 5,,,,, V Notes: Please consult us about other coil voltages. Gold-clad contact type available on request. SFY ASCTB7E 05-T

2 TYPES Contact arrangement Nominal coil voltage Part 5 V DC SFY-DC5V V DC SFY-DCV Form A Form B V DC SFY-DCV V DC SFY-DCV -pole V DC SFY-DCV V DC SFY-DCV 5 V DC SFY-DC5V V DC SFY-DCV Form A Form B V DC SFY-DCV V DC SFY-DCV V DC SFY-DCV V DC SFY-DCV 5 V DC SFY-DC5V V DC SFY-DCV Form A Form B V DC SFY-DCV V DC SFY-DCV -pole V DC SFY-DCV V DC SFY-DCV 5 V DC SFY5-DC5V V DC SFY5-DCV 5 Form A Form B V DC SFY5-DCV V DC SFY5-DCV V DC SFY5-DCV V DC SFY5-DCV Standard packing: Tube 0 pcs. RATING. data -pole -pole Contact arrangement Form A Form B Form A Form B Form A Form B 5 Form A Form B Nominal coil voltage 5V DC Pick-up voltage (at 0 C F) Drop-out voltage (at 0 C F) Nominal operating current [±0%] (at 0 C F) resistance [±0%] (at 0 C F) ma Ω V DC 5mA 5Ω V DC ma 0Ω V DC 7mA Ω V DC ma Ω V DC ma Ω 5V DC ma Ω V DC 5mA 5Ω V DC ma 0Ω V DC 7mA Ω V DC ma Ω V DC 75%V or less of 5%V or more of ma Ω nominal voltage nominal voltage 5V DC (Initial) (Initial) ma Ω V DC 5mA 5Ω V DC ma 0Ω V DC 7mA Ω V DC ma Ω V DC ma Ω 5V DC ma Ω V DC 5mA 5Ω V DC ma 0Ω V DC 7mA Ω V DC ma Ω V DC ma Ω Nominal operating power (at 0 C F) 70mW Max. applied voltage (at 0 C F) 0%V of nominal voltage ASCTB7E 05-T

3 . Specifications Characteristics Contact Rating Electrical characteristics Mechanical characteristics Item Notes: *. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage conditions in NOTES. *. According to EN 0-:00, table. Characteristic is sealed construction with s, case and base sealed shut with sealing resin. Construction is designed to prevent seeping of flux when soldering and cleaning fluid when cleaning. Harmful substances on the contacts are removed by gas purging before sealing with. *. holding voltage is the coil voltage after 00 ms from the applied nominal voltage. Important: Relay characteristics may be influenced by: strong external magnetic fields magnetic conductive materials near the relay narrow top-to-top mounting (printed surface to printed surface) -pole Specifications Contact arrangement Form A Form B, Form A Form B Form A Form B, 5 Form A Form B Forcibly guided contacts All contacts: Type A, EN 5005 Contact resistance (Initial) Max. 00 mω (By voltage drop V DC A) Contact material Au-flashed AgNi alloy type Nominal switching capacity (resistive load) Max. switching power (resistive load) Max. switching voltage Max. switching current Min. switching capacity (Reference value)* Insulation resistance (Initial) Between open contacts Breakdown Between contact sets voltage (Initial) Between contact and coil holding voltage* Operate time (at 0 C F) Release time (at 0 C F) Shock resistance Vibration resistance Functional Destructive Functional Destructive A 50V AC, A 0V DC,500VA, 0W 50V AC, 0V DC A 0mA 0V DC -pole Min.,000MΩ (at 500V DC) Measurement at same location as Breakdown voltage section.,500 Vrms for min. (Detection current: 0mA),000 Vrms for min. (Detection current: 0mA) NC:,500 Vrms for min; NO:,000 Vrms for min (Detection current: 0mA) Min. 0%V (Initial, at 0 C F) Max. 0ms (Nominal coil voltage applied to the coil, excluding contact bounce time) Max. 0ms (Nominal coil voltage applied to the coil, excluding contact bounce time) (without diode) 00 m/s (Half-wave pulse of sine wave: ms; detection time: 0μs),000 m/s (Half-wave pulse of sine wave: ms) 0 to 55 Hz at double amplitude of.5 mm.05 inch (Detection time: 0μs) 0 to 55 Hz at double amplitude of.5 mm.05 inch Mechanical Min. 0 7 (at 0 times/min.) Expected life Electrical 50 V AC A resistive load: Min. 0 5 (at 0 times/min.) Degree of protection RT III* Conditions Conditions for operation, transport and storage* Max. Operating speed Ambient temperature: 0 C to +70 C 0 F to +5 F Humidity: 5 to 5% R.H. (Not freezing and condensing at low temperature) 0 times/min. (at nominal voltage) Unit weight Approx. g.7 oz Approx. g. oz SFY Insulation Form A Form B Form A Form B Form A Form B 5 Form A Form B NC NC 5 NO NC 5 NO NC NC 5 NO NO NC 5 NO 7 NO5 0 NO 7 NO5 0 NO 7 NO5 NO 0 NO 7 NO5 NO 0 = Reinforced insulation: overvoltage category III, pollution degree, 50V AC (Clearance and creepage distance is 5.5 mm.7 inch or more between contact sets shown by. Also, there is 5.5 mm.7 inch or more clearance and creepage distance even between contact NO and coil.) = Basic insulation: overvoltage category III, pollution degree, 50V AC (Between contact NC and coil shown by, the clearance is mm. inch or more and the creepage distance is mm.57 inch or more.) ASCTB7E 05-T

4 Other contact gaps when contacts are welded The table below shows the state of the other contacts. In case of form NO contact weld the coil applied voltage is 0 V. In case of form NC contact weld the coil applied voltage is nominal. < Form A Form B> < Form A Form B> < Form A Form B> <5 Form A Form B> - (NC) 5- (NC) 7- (NO) -0 (NO) - (NC) >0.5 > (NC) >0.5 > (NO) >0.5 >0.5-0 (NO) >0.5 >0.5 - (NC) 5- (NO) 7- (NO) -0 (NO) - (NC) >0.5 >0.5 > (NO) > (NO) >0.5-0 (NO) >0.5 - (NC) 5- (NC) 7- (NO) -0 (NO) - (NO) - (NO) - (NC) >0.5 >0.5 >0.5 > (NC) >0.5 >0.5 >0.5 > (NO) >0.5 >0.5-0 (NO) >0.5 >0.5 - (NO) >0.5 >0.5 - (NO) >0.5 >0.5 - (NC) 5- (NO) 7- (NO) -0 (NO) - (NO) - (NO) - (NC) >0.5 >0.5 >0.5 >0.5 > (NO) > (NO) >0.5-0 (NO) >0.5 - (NO) >0.5 - (NO) >0.5 >0.5: contact gap is kept at min. 0.5 mm.00 inch Empty cells: either ON or OFF Note: Contact gaps are shown at the initial state. If the contact transfer is caused by load switching, it is necessary to check the actual loading. ASCTB7E 05-T

5 DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: -pole ( Form A Form B, Form A Form B) CAD Data External dimensions (x).0 (x) 0.5 (x).0 (x) 0.5 (x).00 (x) General tolerance: ±0. ± Projection mode: Schematic (Bottom view) PC board pattern (Bottom view) ( Form A Form B) ( Form A Form B) dia., typical value for manual insertion..0 dia., typical value for automatic insertion Tolerance: ±0. ±.00 5 ASCTB7E 05-T

6 . -pole ( Form A Form B, 5 Form A Form B) CAD Data External dimensions (x).0 (x) 0.5 (x).0 (x) 0.5 (x).00 (x) General tolerance: ±0. ± Projection mode: Schematic (Bottom view) PC board pattern (Bottom view) ( Form A Form B) (5 Form A Form B) dia., typical value for manual insertion..0 dia., typical value for automatic insertion Tolerance: ±0. ±.00 SAFETY STANDARDS Certification authority File Rating UL/C-UL E07* A 50V AC, general use, 00Kops A 0V DC, general use, 00Kops, B00, R00 (pilot duty) TÜV Cert. no: /EZ / A 0V AC (cosφ=.0) 70 C 5 F resistive, A V DC (cosφ=.0) resistive * CSA standard certified by C-UL NOTES. For cautions for use, please read General Application Guidelines on page B-.. operating power Pure DC current should be applied to the coil. The wave form should be rectangular. If it includes ripple, the ripple factor should be less than 5%. However, check it with the actual circuit since the characteristics may be slightly different.. connection When connecting coils, refer to the wiring diagram to prevent mis-operation or malfunction.. Soldering When using automatic soldering, the following conditions are recommended ) Preheating: 0 C F, within 0 sec (PC board solder surface) ) Soldering: 0 C±5 C 500 F± F, within sec ASCTB7E 05-T

Slim type safety relays. FEATURES 1. Acquisition of Korean safety certification ( S mark) Excluding with diode type

Slim type safety relays. FEATURES 1. Acquisition of Korean safety certification ( S mark) Excluding with diode type Slim type safety relays SF RELAYS Slim type RoHS compliant Protective construction: Flux-resistant type ORDERING INFORMATION S: Slim type Contact arrangement 2: 2 Form A 2 Form B 3: 3 Form A Form B 4: