RF Signal Relays AXICOM. HF3 S Relay

Size: px

Start display at page:

Download "RF Signal Relays AXICOM. HF3 S Relay"

Hubert Manning
5 years ago
Views:

1 n Y-Design n range DC to n Impedance 5 n Small dimensions (15x7.6x1.6mm) n 1 form C contact (1 changeover contact) n Immersion cleanable n Low power consumption ( 14mW) Typical applications Cable modems and linecards CATV, Tabs, measurement and test equipment ATE, satellite audio video tuners, wireless base stations and antennas, power stages Contact Contact arrangement Max. switching voltage Rated current Limiting continuous current, 2 C Switching power 1 form C, 1 CO 22VDC, 25VAC 2A 2A 6W, 62.5VA, 5W (2.5) Max. Continuos RF-Power, at 2 C., VSWR <1.2 1) 2 1) Breaking capacity max. W 1) Contact material Ag, Au covered Minimum switching voltage 1µV Initial contact resistance <1m at 1mA2mV Operate time typ. ms, max. 5ms Release time without diode in parallel typ. 2ms, max. 5ms with diode in parallel typ. 4ms, max. 6ms Bounce time max. typ. 1ms, max. ms Duration of setreset pulse min. 2ms Mechanical endurance 1 7 operations 1) with appropriat cooling only Coil (continued) Coil versions, bistable Coil Rated Set Limiting Reset Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC ±1% mw 5 version, bistable, 1 coil 7S version, bistable, 2 coils 91S S S S version, bistable, 2 coils 41S S S S All figures are given for coil without pre-energization, at ambient temperature +2 C. Coil operating Range Coil Coil voltage range to 24VDC Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC VDC VDC VDC ±1% mw 5 version, monostable, 1 coil version, monostable, 14 mw 1 coil 7 mw All figures are given for coil without pre-energization, at ambient temperature +2 C. Coil Voltage [UU nom ] Coil Voltage [UU nom ] U nom. nominal coil voltage Uop. min. Urel. min. Umax. at A 1U nom. nominal coil voltage U nom. nominal coil voltage Umax. at A 14 mw 7 mw.5 Uop. min , Rev. 112 U nom 212 Tyco Electronics Corporation, U max. sheets and product specification = Nominal according coil to voltage IEC and to be used = Upper only limit together of with the the operative Definitions range section. of the coil voltage (limiting voltage) U op. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) For latching relays U set min. resp. U reset min. sheets and product data is subject to the sheets, product data, Definitions section, 1

2 RF Signal Relays Rev. Rev. D D Signal Signal andrelays S Relay (Continued) Rev. D Rev. D SignalSignal andrelays Insulation 5 version version SignalSignal and Relays Initial dielectric strength Other Rev. DRev. D Material compliance: EU RoHSELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at customersupportrohssupportcenter 5 Ambient 5 temperature -55 C to +85 C Thermal resistance <165KW -8dB -8dB -55dB -55dB -8dB -8dB -5dB -5dB Category of environmental protection -.db -.db -.12dB -.12dB -.db -.db -.db -.db -.12dB -.12dB -.db -.db IEC 6181 RT III - wash tight of1.1 67, immersion Degree protection, IP cleanable IEC Vibration 5g, to Hz -8dB resistance -8dB -55dB (functional) -55dB -8dB 1-8dB -5dB -5dB Shock resistance (functional), half sinus 11ms 5g -.db -.db -.12dB -.12dB -.db -.db -.db -.db -.12dB -.12dB -.db -.db Shock resistance (destructive), half sinus.5ms 15g 5 5 type SMT Terminal -8dB -8dB -55dB -55dB -8dB max. -8dB g -5dB -5dB Weight Resistance to soldering heat SMT -.db -.db -.db -.12dB -.12dB -.db -.db -.db -.12dB -.12dB -.db -.db C1s 1.5Moisture 1.5 IEC sensitive level, JEDEC J-Std-2D MSL Ultrasonic not recommended cleaning Packagingunit, SMT reel25 pcs., box25 pcs. between open contacts 6Vrms between contact and coil Vrms surge withstand voltage RF Initial RF between open contacts V at 1 at between contact and coil V at 1 at RF RF at 1 at RF at 1 at at 1 at dB8dB at 19 95dB8dB RF RF at 1 at dB 9 at 5dB at 1 at loss at 19.dB.12dB at 1 at dB.12dB at.db.db at 1 at Voltage standing wave ratio (VSWR) 5 5at [db] [db] [] [] [] [] 2 -loss [db]-loss [db]-loss [db] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] RF performance, Ω version [] [] -loss [db]-loss [db] -loss [db] RF performance, 5Ω version [db] [db] [db] [db] [] [] [] [] , Rev. 112 sheets and product 2 specification 2 [] according [] to IEC and to be used 212 Tyco Electronics Corporation, [] [] sheets and product data is subject to the sheets, product data, Definitions sec [] [] tion, [] [] All specifications All specifications subject subject to change. to change. Consult Consult TycoTyco Electronics Electronics for latest for latest specifications. specifications. [] [] 8 of812 of 12

3 (Continued) Terminal assignment TOP view on component side of PCB Monostable Bistable, 1 coil Bistable, 2 coils + set - - reset Contacts are shown in reset condition. Contact position might change during transportation and must be reset before use reset - - set + PCB layout TOP view on component side of PCB 5 version version Dimensions 5 version version 1-212, Rev Tyco Electronics Corporation, sheets and product specification according to IEC and to be used sheets and product data is subject to the sheets, product data, Definitions section,

4 (Continued) Processing Packing Recommended soldering conditions Vapour phase soldering 2 to 4s 24 C full line: typical dotted line: process limits Tape and reel for SMT 18 C 1 C external preheating 1 C forced cooling Vapour phase soldering temperaturetime profile Recommended reflow soldering profile Infrared soldering temperaturetime profile Reel dimensions Resistance to soldering heat Infrared soldering temperaturetime profile , Rev Tyco Electronics Corporation, sheets and product specification according to IEC and to be used sheets and product data is subject to the sheets, product data, Definitions section,

5 (Continued) Product code structure Typical product code 5 S Type Coil Type Relays S Series 1 form C, 1 CO Coil code: please refer to coil versions table Performance type 5x 5 version, monostable 1coil x version, monostable 1coil 7x 5 version, bistable 1coil 2x version, bistable 1coil 9x 5 version, bistable 2coils 4x version, bistable 2coils S performance Product code Arrangement Version Coil Coil type Part number 5S 1 form C (1 CO) 5ohm 5VDC Monostable S 12VDC S 24VDC S 1 form C (1 CO) 5ohm 4.5VDC Bistable 2 coils S 5VDC S 12VDC S 1 form C (1 CO) ohm 5VDC Monostable S 9VDC S 12VDC S 1 form C (1 CO) ohm VDC Bistable 2 coils S 4.5VDC This list represents the most common types and does not show all variants covered by this data sheet. Other types on request 1-212, Rev Tyco Electronics Corporation, sheets and product specification according to IEC and to be used sheets and product data is subject to the sheets, product data, Definitions section, 5

RF Signal Relays AXICOM. HF3 S Relay

RF Signal Relays AXICOM. HF3 S Relay n Y-Design n range DC to n Impedance n Small dimensions (x7.6x.6mm) n form C contact ( changeover contact) n Immersion cleanable n Low power consumption ( 4mW) Typical applications Cable modems and linecards