TVA Thermopad Series offer proven performance and significant high reliability heritage in a commercial grade product. Features and Benefits
|
|
|
- Quentin Greer
- 5 years ago
- Views:
Transcription
1 Attenuator Temperature Variable Chip 2 Watts TVA Thermopad Series offer proven performance and significant high reliability heritage in a commercial grade product. Smiths Interconnect is the world leader in temperature variable chip attenuators offering the widest selection of products from DC through Ka band. Thermopad products have been a highly reliable passive solution for over temperature gain compensation for more than 20 years. Smiths Interconnect is the leader in high reliability components. The TVA platform offers significant heritage and proven performance in a cost effective commercial grade product. High reliability tested options are also available to ensure mission success in demanding applications. Rated for DC-6 GHz with excellent broadband response, the TVA series supports a wide range of applications. It is constructed on an Alumina substrate with rugged thick film terminations and thick film thermistor technology. The product also includes a protective coating for added protection from various environmental conditions. Multiple attenuation values, temperature shift options and mounting configuration are available to support both surface mount and wire bond applications. Various finish options are also available including RoHS compliant solutions. Features and Benefits Small Footprint Multiple Mounting Configurations Broad Frequency Range Low VSWR Wide Range of Attenuation Values Multiple Temperature Shift Options Tight Attenuation Tolerance Applications Amplifier Circuits Transmit/Receive Modules Up/Down Converters Instrumentation Satellite Communications Radar Broadcast
2 Technical Characteristics Mounting Configuration Options Electrical Nominal Impedance Frequency Range Attenuation Values Available 50 ohms Planar Single Wrap (W1) Triple Wrap (W3) Wire Bondable Gold (WB1) DC -6.0 GHz 1-10 in 1 db Increments Attenuation Accuracy ± C Temperature Coefficient of Attenuation (TCA) (db/db/ C) in db/db/ C increments through & Positive Shift Options through through & Positive Shift Options , , and through Positive Shift Options through through & Temperature Coefficient Tolerance Input Power CW 2 Peak Power VSWR Environmental Operating Temperature Storage Temperature Moisture Sensitivity Level Mechanical ± db/db/ C - 2 Watts Max up to 125 C (See derating curve) Positive Shift Options Watts Max up to 125 C (See derating curve) - 20 Watts based on 10 µs pulse 1% Duty Cycle Positive Shift Options Watts based on 10 µs pulse 1% Duty Cycle 1.30:1 1 GHz -55 C to +150 C -65 C to +150 C MSL 1 - Unlimited Substrate Material Alumina (Al 2 O 3 ) 96% Resistive Film Thick Film, Thermistor Terminal Material Thick Film Thick Film Bondable Gold Input/Output Pads, Solderable Platinum Gold Ground Protective Coating Polymer Finish Options Blank Solder Plated (Sn60/Pb40) Solder Plated (Sn60/Pb40) N/A Marking Unit Marking Quality Assurance Packaging Standard Packaging -F Silver Plated (RoHS Compliant) Silver Plated (RoHS Compliant) -S Pretinned (Sn60/Pb40) Pretinned (Sn60/Pb40) -G Gold (Thick Film) db Value (X), Direction of shift (N), & TCA value (X) None db Value (X), Direction of shift (N), & TCA value (X) Sample visual and mechanical Inspection AQL per mechanical drawing requirements. Periodic electrical inspection performed for commerical grade products. High reliability tested products are available per MIL-PRF TCA Calculation Method - Measure DC every 20 C over the temperature range of -55 C to +125 C Calculate the slope of the curve using linear regression. Calculate TCA using the following formula: TCA = Slope 25 C Tape and Reel or Waffle Pack None
3 Power Derating Curve 100% RATED POWER 50% SAFE OPERATING AREA 0% TEMPERATURE IN C Typical Data TVA0X00N0X Planar TVA0X00N0XW3 Triple Wrap TVAXX00XXX Series VSWR Attenuation (db) TVA0100N0X TVA0200N0X TVA0300N0X TVA0400N0X TVA0500N0X TVA0600N0X TVA0700N0X TVA0800N0X TVA0900N0X TVA1000N0X VSWR Frequency (GHz) Frequency (GHz) 3
4 Mechanical TVA - Planar Option TYP [1.02] 0.020± [3.68] XNX [3.10] [0.51] MARKING ON THIS SURFACE TVA - Single Wrap Option TYP [1.02] 0.021± [3.68] [3.12] [0.76] FULL TERMINAL TVA - Triple Wrap Option [3.73] TYP [1.04] 0.021± TYP [0.38] [1.57] XNX [3.12] [0.79] [3.43] [0.38] MARKING ON THIS SURFACE TVA - Wire Bondable Gold Option TYP [1.02] 0.021± [3.68] [3.12] [0.76] 4 *Dimensions apply before solder, allow max for all pretinned surfaces Unless otherwise specified, tolerance: X.XXX = ±0.005 FULL TERMINAL
5 Suggested Mounting Footprint Inches MM Part Number A B C D S W A B C D S W TVA0X00N0X (Planar) and TVA0X00N0XW3 (Triple Wrap) A C B S D W PLATED THRU HOLES How To Order Specify Model Number: TVA0X00NXXXXXX T V A Series Name T V A Series 2 Atttenuation Value db through db 3 EMC Code 0 0 EMC Code 4 TCA Slope N Negative P Positive 5 TCA Shift Option (db/db/ C) = = = = = = = Options Planar W 1 Single Wrap Ground W 3 Triple Wrap - All Ports W B 1 Wire Bondable 7 Terminal Finish Standard S Pretinning F RoHS G Gold 5
6 RFMW Ltd. Global Support For sales locations and contact information visit: more > smithsinterconnect.com Copyright 2018 Smiths Interconnect All rights reserved Version 1.0 The information contained within this document is subject at all times to applicable Export Control regulations and legal requirements
TT9 SMT Series. Attenuator Chip 500 Milliwatts
Attenuator Chip 500 Milliwatts TT9 SMT Series Attenuator Chip 500 Milliwatts TT9 SMT Series, specifically designed for surface mount broadband applications which require more power. Smiths Interconnect
Thermopad. Introduction
Introduction Thermopad Features Lead Free Option Available Impedance 50 and 75 Ohms Frequency Ranges from DC to 46 GHz Attenuation Values from 1 to 10 db Wire Bondable Connections Available Negative and
Smiths Microwave Product Overview May, 2016
Smiths Microwave Product Overview May, 2016 This presentation is an unpublished work, created in 2016 by Smiths Interconnect Microwave Components, Inc., all rights reserved. 1 Components EMC Technology
State of the Art, Inc Fox Hill Road, State College, PA USA tel: (814) fax: (814)
Temperature Variable Attenuators Temperature variable attenuators (TVAs) decrease attenuation with increasing ambient temperature. TVAs passively compensate temperature sensitive components without generating
Introduction. Attenuators
Introduction Attenuators Features Lead Free, RoHS Compliant Option Available Substrates - BeO, AlN or Alumina Power Rating -.05 to 400 Watts Frequency Range DC to 6 GHz Package styles: chip, tab & cover,
- 01dB = 1dB, - 02dB = 2dB, - 03dB = 3dB, - 04dB = 4dB, - 05dB = 5dB, - 06dB = 6dB, - 07dB = 7dB, - 08dB = 8dB, - 09dB = 9dB, - 10dB = 10dB
AT02M0.09 - Page 1 of 13 Product Family: Part Number Series: Temperature Variable Attenuators ATV112F Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film resistive
Model C0810J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C81J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C81J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. It
Detailed Electrical Specifications: Specifications subject to change without notice. Broadband Narrowband 25 C
fee Ultra Low Profile 85 Balun 75Ω to 75Ω Balanced Description The B225J7575AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on
Model PD0409J7575S2HF
Model PD49J77SHF Ultra Low Profile 8 Power Divider 7Ω to 7Ω Description The PD49J77SHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49J77SHF is
Model C1517J5003AHF. Ultra Low Profile db, 90 Hybrid Coupler
Model C57J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C57J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package. The
Model PD3150J5050S2HF
Model PD315J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD315J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD315J55S2HF
Model PD0409J5050S2HF
Model PD49JSHF Ultra Low Profile 8 Power Divider Ω to Ω Description The PD49JSHF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD49JSHF is ideal for
Model BD3238N5050AHF. Ultra Low Profile 0404 Balun
Model BD338N55AHF Ultra Low Profile 44 Balun 5Ω to 5Ω Balanced Description The BD338N55AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and
Model PD2328J5050S2HF
Model PD2328J55S2HF Ultra Low Profile 85 Power Divider 5Ω to 5Ω Description The PD2328J55S2HF is a low profile, sub-miniature Wilkinson power divider in an easy to use surface mount package. The PD2328J55S2HF
SA18N-20 DATA SHEET. 20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
20 db Fixed Attenuator N Male To N Female Up To 18 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
ATTENUATORS FIXED COAXIAL
ATTENUATORS FIXED COAXIAL SV Microwave manufactures a complete line of standard and custom-designed attenuators, including QPL and Hi-Rel versions. A variety of connector configurations are available,
SA26B-10 DATA SHEET. 10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body.
10 db Fixed Attenuator SMA Male To SMA Female Up To 26 GHz Rated To 2 Watts With Passivated Stainless Steel Body Fairview Microwave carries a broad selection of fixed attenuators with a wide range of attenuation
ENGAT00000 to ENGAT00010
Wideband Fixed Attenuator Family, DIE, DC to 50 GHz ENGAT00000 / 00001 / 00002 / 00003 / 00004 / 00005 / 00006 / 00007 / 00008 / 00009 / 00010 Typical Applications ENGAT00000 to ENGAT00010 Features Space
Return loss (db) Insertion loss (db) .56±.06 TBD. GND / DC Feed 1 + RF GND 2. Unbalanced Port Balanced Port Balanced Port.
Model BD6N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD6N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB, - 07DB = 7dB, - 08DB = 8dB, - 09DB = 9dB, - 10DB = 10dB
AT02M750.06 - Page 1 of 14 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805C Series Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni alloy thin-film
Model C2327J5003AHF Rev D
Model C2327J53AHF Ultra Low Profile 85 3 db, 9 Hybrid Coupler Description The C2327J53AHF is a low cost, low profile sub-miniature high performance 3 db coupler in an easy to use surface mount package.
- 01DB = 1dB, - 02DB = 2dB, - 03DB = 3dB, - 04DB = 4dB, - 05DB = 5dB, - 06DB = 6dB
AT02M750.08 - Rev A - Page 1 of 10 Product Family: Part Number Series: Temperature Variable Attenuators ATV0805J Series (10GHz) Construction: High purity Alumina Substrate Thermo-sensitive thermistor Ni
Model BD4859L50100A00 Rev A
Model BD4859L51A Ultra Small Low Profile 63 Balun 5Ω to 1Ω Balanced Description The BD4859L51A is an ultra-small low profile balanced to unbalanced transformer designed for differential inputs and output
Model B0922N7575AHF Rev B. Ultra Low Profile 0404 Balun
Model B9N7575AHF Ultra Low Profile 44 Balun 75Ω to 75Ω Balanced Description The B9N7575AHF is a low profile, low impedance mm square subminiature wideband unbalanced to balanced transformer designed for
LM M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet
LM200802-M-A-300 Surface Mount Pin Diode Limiter, 20 MHz 8 GHz Datasheet Features Broadband Performance: 20 MHz 8 GHz Surface Mount Limiter in Compact Outline: 8 mm L x 5 mm W x 2.5 mm H Incorporates NIP
High Precision Wraparound - Wide Ohmic Value Range Thin Film Chip Resistors
P Vishay Sfernice High Precision Wraparound - Wide Ohmic Value Range For low noise and precision applications, superior stability, low temperature coefficient of resistance, and low voltage coefficient,
Model BD1722J50100A00
Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1722J51A is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations on next generation
Surface Mount Limiter, GHz
Surface Mount Limiter, 2.9 3.3 GHz LM2933-Q-B-301 Datasheet Features Surface Mount Limiter in Compact Package: 8 mm L x 5 mm W x 2.5 mm H Incorporates PIN Limiter Diodes, DC Blocks, Schottky Diode & DC
Data Sheet. ACMD-6003 UMTS Band 3 Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-63 UMTS Band 3 Duplexer Data Sheet Description The Avago ACMD-63 is a highly miniaturized duplexer designed for use in UMTS Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data terminals.
Model BD1631J50100AHF
Model BD1631J51AHF Ultra Low Profile 85 Balun 5Ω to 1Ω Balanced Description The BD1631J51AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output
Model 2425B50-50C Rev. A
rit Model 2425B50-50C Xinger Balun 50Ω to 100Ω Balanced Description The 2425B50-50C is a low profile sub-miniature balanced to unbalanced transformer designed for differential inputs and output locations
MADP Solderable AlGaAs Flip Chip PIN. Features. Chip Dimensions. Description. Applications
Features Low Series Resistance Ultra Low Capacitance Millimeter Wave Switching & Cutoff Frequency 2 Nanosecond Switching Speed Can be Driven by a Buffered TTL Silicon Nitride Passivation Polyimide Scratch
Data Sheet. ACMD-6125 Band 25 Duplexer. Description. Features. Specifications, 10 C to +85 C. Applications. Functional Block Diagram
ACMD-6125 Band 25 Duplexer Data Sheet Description The Avago ACMD-6125 is a highly miniaturized duplexer designed for use in Band 25 (185.25 1914.75 MHz UL, 193.25 1994.75 MHz DL) handsets and mobile data
Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
RESISTIVE POWER SPLITTERS AND DIVIDERS
RESISTIVE POWER SPLITTERS AND DIVIDERS DC 40.0 GHz S Resistive Power Splitters Usage: : Use in RF and wireless applications where one of the two outputs are included in a leveling loop or used as a reference
Data Sheet. ACMD-6103 Band 3 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-613 Band 3 Duplexer Data Sheet Description The Avago Technologies ACMD-613 is a highly miniaturized duplexer designed for use in LTE Band 3 (171 1785 MHz UL, 185 188 MHz DL) handsets and mobile data
Model BD2425N50200AHF. Ultra Low Profile 0404 Balun 50Ω to 200Ω Balanced
Model BD45N5AHF Ultra Low Profile 44 Balun 5Ω to Ω Balanced Description The BD45N5AHF is a low cost, low profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output
Data Sheet. ACMD-6307 LTE Band 7 Duplexer. Description. Features. Specifications. Applications. Functional Block Diagram
ACMD-637 LTE Band 7 Duplexer Data Sheet Description The Avago ACMD-637 is a highly miniaturized duplexer designed for use in LTE Band 7 (25 257 MHz UL, 262 269 MHz DL) handsets and mobile data terminals.
Buried Broadband Capacitors How To Order
Quick Select by Application and Resonant Free Bandwidth Size Resonant Free Bandwidth** Typical Insertion Loss (S21)*** 2 Cap Values in Parallel (pf) Temp. Coeff. Working VDC FIT Calc. using cont. op. temp.
Data Sheet. ACFF-1024 ISM Bandpass Filter ( MHz) Description. Features. Specifications. Functional Block Diagram.
ACFF-124 ISM Bandpass Filter (241 2482 MHz) Data Sheet Description The Avago ACFF-124 is a miniaturized Bandpass Filter designed for use in the 2.4 GHz Industrial, Scientific and Medical (ISM) band. The
Top View (Near-side) Side View Bottom View (Far-side) ± ±.08. 4x.28. Orientation Marker Balanced port 1.
Model BD2FAHF Ultra Low Profile 168 Balun Ω to Ω Balanced Description The BD2FAHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
High-Reliability and Environment Qualified Components
High-Reliability and Environment Qualified Components Introduction Ruggedness and reliability have been designed in across our product lines and proven in the field. This section of our catalog provides
RFSWLM S-Band Switch Limiter Module
PRELIMINARY RFSWLM-2420-131 S-Band Switch Limiter Module Features: Surface Mount S- Band Switch Limiter Module 5mm x 8mm x 2.5mm Frequency Range: 2 to 4 GHz Higher Average Power Handling than Plastic Packages
Data Sheet. ACMD-7409 Miniature PCS Band Duplexer. Features. Description. Specifications. Applications. Functional Block Diagram
ACMD-749 Miniature PCS Band Duplexer Data Sheet Description The Avago ACMD-749 is a miniature duplexer designed for US PCS handsets. The ACMD-749 is designed with Avago Technologies Film Bulk Acoustic
Data Sheet. ACMD-4102 UMTS/NCDMA/Co-band GSM Rx Band 2 Duplexer with Balanced Rx Port. Features. Description. Specifications.
ACMD-412 UMTS/NCDMA/Co-band GSM Rx Band 2 Duplexer with Balanced Rx Port Data Sheet Description The Avago ACMD-412 is a highly miniaturized duplexer designed for use in UMTS and NCDMA Band 2 (185.48 199.52
Electrical Specifications. Insertion to +85 TOP VIEW SIDE VIEW BOTTOM VIEW. Pin 2. Yantel Corporation
Description The is a low profile, high performance 20dB directional coupler. It is designed for DCS & PCS applications. This component is suitable for feed-forward amplifier and signal sampling circuits
1N4460US 1N4496US and 1N6485US 1N6491US
Available on commercial versions VOIDLESS HERMETICALLY SEALED SURFACE MOUNT 1.5 WATT GLASS ZENER DIODES Qualified per MIL-PRF-19/406 DESCRIPTION This surface mount, Zener voltage regulator series is military
it2025j 30 khz to 18 GHz High-Gain Power Amplifier VCTRL2 VD2 OUT VG2 VG1 Description Features Device Diagram Recommended bias conditions:
30 khz to GHz High-Gain Power Amplifier Description Features The it2j is a RoHS-6-compliant packaged broadband GaAs MMIC traveling wave amplifier designed for medium output power applications where low-frequency
Quasi Active High Power L Band PIN Diode Limiter Module - SMT. Surface Mount L- Band Limiter Module: High Peak Power Handling: Low Insertion Loss:
PRELIMINARY RFLM-102202XA-150 Quasi Active High Power L Band PIN Diode Limiter Module - SMT Features: Surface Mount L- Band Limiter Module: Frequency Range: High Average Power Handling: High Peak Power
Limiter Diodes Features Description Chip Dimensions Model DOT Diameter (Typ.) Chip Number St l Style Inches 4 11
Features Low Loss kw Coarse Limiters 200 Watt Midrange Limiters 10 mw Clean Up Limiters 210 20 Description Alpha has pioneered the microwave limiter diode. Because all phases of manufacturing, from design
Top View (Near-side) Side View Bottom View (Far-side) .89±.08. 4x.280. Orientation Marker Orientation Marker.
Model B2F2AHF Ultra Low Profile 168 Balun Ω to 2Ω Balanced Description The B2F2AHF is a low profile sub-miniature balanced to unbalanced transformer designed for differential input locations on data conversion
Passive MMIC 30GHz Equalizer
Page 1 The is a passive MMIC equalizer. It is a positive gain slope equalizer designed to pass DC to 30GHz. Equalization can be applied to reduce low pass filtering effects in both RF/microwave and high
High Power C Band Limiter Module: Ultra Low Flat Leakage & Fast Recovery Time
PRELIMINARY RFLM-502602HC-491 High Power C Band Limiter Module: Ultra Low Flat Leakage & Fast Recovery Time Features: C Band SMT Limiter Module 6mm x 9mm x 2.5mm Frequency Range: 5.0 to 6.0 GHz High Average
Insertion loss (db) Return Loss (db) Orientation Marker Denotes Pin Location. Configuration-4 Coupled GND. Direct. Direct Isolated.
Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 33 38 MHz Mean Coupling 5dB Ultra Low Insertion Loss WiMax,
Model DC4859J5005AHF. Ultra Low Profile db Directional Coupler
Model DC4859J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Features: 47-59 MHz Mean Coupling 5dB Ultra Low Insertion
Insertion loss (db) Return Loss (db) 4x x x Orientation Marker Denotes Pin Location
Model DC1722J55AHF Ultra Low Profile 85 5 db Directional Coupler Detailed Electrical Specifications: Specifications subject to change without notice. Description The DC1722J55AHF is a low cost, low profile
High Frequency (up to 20 GHz) Resistor, Thin Film Surface Mount Chip
High Frequency (up to 20 GHz) Resistor, Thin Film Surface Mount Chip series chip resistors are designed with low internal reactance. They function as almost pure resistors on a very high range of frequencies.
CR0603/CR0805/CR Chip Resistors
*RoHS COMPLIANT Features RoHS compliant* Power rating at 7 C: CR63 -.1 W, CR85 -.125 W, CR126 -.25 W Tight tolerances of bottom electrode width Suitable for all types of soldering processes Three layer
Data Sheet. ACMD-7605 Miniature UMTS Band 8 Duplexer. Description. Features. Specifications
ACMD-765 Miniature UMTS Band 8 Duplexer Data Sheet Description The Avago Technologies ACMD-765 is a miniature duplexer designed for use in UMTS Band 8 (88 915 MHz UL, 925 96 MHz DL) handsets and mobile
The RFLM QX-290 Limiter Module carries a Class 0 ESD rating (HBM) and an MSL 1 moisture rating.
PRELIMINARY RFLM-202802QX-290 Two Stage Passive Limiter Module - SMT Features: Surface Mount Limiter Module: 5mm x 8mm x 2.5mm Passive High Power PIN Limiter Design Frequency Range: 2 GHz to 8 GHz High
High Average Power Handling : High Peak Power Handling: Low Insertion Loss: Low Flat Leakage Power : Low Spike Energy Leakage:
PRELIMINARY RFLM-501202MC-299 Two Stage Passive Limiter Module - SMT Features: Surface Mount Limiter Module: Frequency Range: High Average Power Handling : High Peak Power Handling: Low Insertion Loss:
High Frequency (up to 40 GHz) Resistor, Thin Film Surface Mount Chip
FC High Frequency (up to 40 GHz) Resistor, Thin Film Surface Mount Chip FC series chip resistors are designed with low internal reactance. They function as almost pure resistors on a very high range of
HMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
VFB1012D (Z-Foil) Vishay Foil Resistors
Ultra High Precision Z-Foil BGA Surface Mount Voltage Divider with 0.1 ppm/ C TCR Tracking, Tolerance Match and Load Life Stability Ratio to ± INTRODUCTION Bulk Metal Z-foil technology out-performs all
Quasi Active High Power L Band PIN Diode Limiter Module - SMT. Surface Mount L- Band Limiter Module: High Peak Power Handling:
RELEASED RFLM-102202QX-290 Quasi Active High Power L Band PIN Diode Limiter Module - SMT Features: Surface Mount L- Band Limiter Module: Frequency Range: High Average Power Handling: High Peak Power Handling:
The RFLM200802MA-299 Limiter Module carries a Class 1C ESD rating (HBM) and an MSL 1 moisture rating.
PRELIMINARY RFLM-200802MA-299 Two Stage Passive Limiter Module - SMT Features: Surface Mount Limiter Module: 5mm x 8mm x 2.5mm Passive High Power PIN Limiter Design Frequency Range: 20 MHz to 8 GHz High
The RFLM102202QX-290 Limiter Module carries a Class 0 ESD rating (HBM) and an MSL 1 moisture rating.
PRELIMINARY RFLM-102202QX-290 PIN Diode Limiter Module - SMT Features: Surface Mount L- Band Limiter Module 5mm x 8mm x 2.5mm Quasi Active High Power PIN Limiter Design Frequency Range: 1 to 2 GHz High
High Average Power Handling: High Peak Power Handling: Low Insertion Loss:
RELEASED RFLM-102202QX-290 Quasi Active PIN Diode Limiter Module - SMT Features: Surface Mount L- Band Limiter Module Frequency Range: High Average Power Handling: High Peak Power Handling: Low Insertion
TGP GHz 180 Phase Shifter. Primary Applications. Product Description. Measured Performance
Amplitude Error (db) S21 (db) 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 Measured Performance 0.0 140 30 31 32 33 34 35 36 37 38 39 40 0-1 -2-3 -4-5 State 0-6 State 1-7 -8-9 -10 30 31 32 33 34 35 36 37 38
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
High Average Power Handling : High Peak Power Handling: Low Flat Leakage Power : Low Spike Energy Leakage:
PRELIMINARY RFLM-200802MA-299 Two Stage Passive Limiter Module - SMT Features: Frequency Range: High Average Power Handling : High Peak Power Handling: Insertion Loss: Return Loss: Low Flat Leakage Power
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC652LP2E
Section / Product...Page. Company Profile...22, 23. Attenuators...2
RESISTIVE COMPONENTS Contents Section / Product....................................Page Company Profile.......................................22, 23 Attenuators..............................................2
Passive MMIC 26-40GHz Bandpass Filter
Page 1 The is a passive MMIC bandpass filter. It is a low loss integrated filter that passes the Ka (26-40GHz) band. Passive GaAs MMIC technology allows production of smaller filter constructions that
Variable Attenuators (Step & Continuous)
(Step & Continuous) Wide Choice of Attenuation & Frequency Ranges. High Reliability & Long Life Rugged Construction & Connectors Rotational Stops Included on most models Low Cost Designs - Model 3033 Custom
Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. *RoHS COMPLIANT VERSIONS AVAILABLE Features Lead free version available (see
Vectron International Filter specification TFS180L 1/5
Vectron International Filter specification TFS180L 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 205.51 Ω -23.24 pf Output: 141.63 Ω - 31.49
MMIC 2-18GHz 90 Splitter / Combiner. Green Status. Refer to our website for a list of definitions for terminology presented in this table.
MMIC 2-18GHz 90 Splitter / Combiner MQS-0218 1 Device Overview 1.1 General Description The MQS-0218 is a MMIC 2GHz 18GHz 90 splitter/combiner. Wire bondable 50Ω terminations are available on-chip. Passive
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
MMIC GHz Quadrature Hybrid
MMIC 3.5-10GHz Quadrature Hybrid MQH-3R510 1 Device Overview 1.1 General Description The MQH-3R510 is a MMIC 3.5 GHz 10 GHz quadrature (90 ) hybrid. Wire bondable 50Ω terminations are available on-chip.
9-10 GHz GaAs MMIC Core Chip
9-10 GHz GaAs MMIC Core Chip Features Functional Diagram Frequency Range: 9GHz 10GHz Tx Small Signal Gain: 28dB Rx Small Signal Gain: 4dB Tx Output P1dB : 22dBm Tx Output Psat : 23dBm Input Return Loss
High Peak Power Handling: Low Insertion Loss: Low Flat Leakage Power: Low Spike Energy Leakage:
RELEASED RFLM-202802QX-290 Two Stage Quasi-Active Limiter Module - SMT Features: Frequency Range: High Average Power Handling: High Peak Power Handling: Low Insertion Loss: Return Loss: Low Flat Leakage
High Peak Power Handling: Low Insertion Loss: Low Flat Leakage Power: Low Spike Energy Leakage:
RELEASED RFLM-202802QX-290 Two Stage Quasi-Active Limiter Module - SMT Features: Frequency Range: High Average Power Handling: High Peak Power Handling: Low Insertion Loss: Return Loss: Low Flat Leakage
Invention Patents.
Temperature Compensation Attenuator USA,Europe, China, Korea, Taiwan Invention Patents www.yantel-corp.com Application Theory: When temperature compensation attenuator is applied to high frequency & microwave
MSW2T /MSW2T SP2T Surface Mount High Power PIN Diode Switch
RELEASED MSW2T-2040-193/MSW2T-2041-193 SP2T Surface Mount High Power PIN Diode Switch Features: Wide Operating Frequency Band: 50 MHz to 4 GHz Surface Mount SP2T Switch: 5mm x 8mm x 2.5mm Industry Leading
High Isolation GaAs MMIC Doubler
Page 1 The is a balanced MMIC doubler covering 16 to 48 GHz on the output. It features superior isolations and harmonic suppressions across a broad bandwidth in a highly miniaturized form factor. Accurate,
MMP PIN Diode Data Sheet Rev A
Rev A Features Low Series Resistance for Low Insertion Loss and High Isolation: R S < 1.2 Ω Low Junction Capacitance for Low Insertion Loss and High Isolation: C J < 0.1 pf Low Thermal Resistance: < 45
Application Notes. Introduction
Introduction EMC Technology has provided an extensive collection of Application Notes that help designers mount and measure the products. These cover the complete line of Thermopads, Attenuators, SmartLoad,
CZRA4728-G Thru CZRA4764-G
CZR4728-G Thru CZR4764-G Voltage: 3.3 to Volts Power:. Watts RoHS Device Features -Batch process design, excellent power dissipation offers better reverse leakage current and thermal resistance. -Standard
Ultra High Precision Z-Foil Flip Chip Resistor with TCR of ± 0.05 ppm/ C, 35 % Space Saving vs. Wraparound Design and PCR of 5 ppm at Rated Power
Ultra High Precision Z-Foil Flip Chip Resistor with TCR of ± 0.05 ppm/ C, 35 % Space Saving vs. Wraparound Design and PCR of 5 ppm at Rated Power Bottom View INTRODUCTION One of the most important parameters
High Average Power Handling: High Peak Power Handling: Low Insertion Loss: Low Flat Leakage Power:
PRELIMINARY RFLM-301511QC-290 Quasi Active High Power UHF Band Limiter Module Features: Frequency Range: High Average Power Handling: High Peak Power Handling: Low Insertion Loss: Return Loss: Low Flat
New Materials and Method for Laser Trimmable NTC Thermistors
New Materials and Method for Laser Trimmable NTC Thermistors By David J. Nabatian Gene A. Perschnick Chuck Rosenwald KOARTAN EMC Technology Corporation Artek Corporation Microelectronic Interconnect Materials
MECGaNC30. 4 to 6 GHz GaN HEMT Power Amplifier. Main Features. Product Description. Applications
Main Features 0.25µm GaN HEMT Technology 4.1 5.9 GHz full performances Frequency Range W Output Power @ Pin 27.5 dbm 37% PAE @ Pin 27.5 dbm % PAE @ Pout Watt 27 db Small Signal Gain Product Description
MMIC 18-42GHz Quadrature Hybrid
MMIC 18-42GHz Quadrature Hybrid MQH-1842 1 Device Overview 1.1 General Description The MQH-1842 is a MMIC 18GHz 42 GHz quadrature (90 ) hybrid. Passive GaAs MMIC technology allows production of smaller
High Average Power Handling: High Peak Power Handling: Low Insertion Loss: Low Flat Leakage Power:
PRELIMINARY RFLM-301511QC-290 Quasi Active High Power UHF Band Limiter Module Features: Frequency Range: High Average Power Handling: High Peak Power Handling: Low Insertion Loss: Return Loss: Low Flat
HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Satcom Military Radar, EW, & ECM Functional Diagram Features Wide Tuning Bandwidth
HMC940LC4B. 13 Gbps, 1:4 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE. Typical Applications. Features. Functional Diagram. General Description
Typical Applications Features The is ideal for: RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 13 Gbps Clock Buffering up to 13 GHz Functional Diagram Inputs Terminated
HMC850LC3. High Speed Logic - SMT. Features. Typical Applications. Functional Diagram. General Description
Typical Applications Features High Speed Logic - SMT The is ideal for: RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 28 Gbps Clock Buffering up to 20 GHz Functional Diagram
HMC728LC3C HIGH SPEED LOGIC - SMT. Typical Applications. Features. Functional Diagram. General Description
Typical Applications Features The HMC728LC3C is ideal for: 2:1 Multiplexer up to 14 Gbps RF ATE Applications Broadband Test & Measurement Serial Data Transmission up to 14 Gbps Redundant Path Switching