REC16K/REC16L/REC16M MANUAL SETTING TYPE OPTICAL ENCODERS R E C 1 6 K FEATURES PART NUMBER DESIGNATION LIST OF PART NUMBERS.

Size: px

Start display at page:

Download "REC16K/REC16L/REC16M MANUAL SETTING TYPE OPTICAL ENCODERS R E C 1 6 K FEATURES PART NUMBER DESIGNATION LIST OF PART NUMBERS."

Hillary Alexis Rodgers
5 years ago
Views:

MANUAL SETTING TYPE RECK/RECL/RECM FEATURES mm square compact size Excellent click & switch feelings Long life of million cycles RoHS compliant PART NUMBER DESIGNATION R E C K 5-0 Series name With

1 MANUAL SETTING TYPE RECK/RECL/RECM FEATURES mm square compact size Excellent click & switch feelings Long life of million cycles RoHS compliant PART NUMBER DESIGNATION R E C K 5-0 Series name With click Push switch function and shaft Single shaft without push switch Single shaft with push switch Double shaft with push switch Output interface Voltage Open collector Output A & B Resolution (P/R) 5 LIST OF PART NUMBERS Resolution Click Push switch function Shaft Output interface Part number 5 (P/R) With Click No Yes Single Shaft Double Shaft Voltage (PIN HEADER Type) Open Collector (SCOKET Type) RECM5-0 RECK5-0 A RECK5-05-B A RECL5-05-B The products indicated by A mark are manufactured upon receipt of order basis.

2 RECK/RECL/RECM STANDARD SPECIFICATIONS Electrical characteristics Mechanical characteristics Input voltage Input current DC5 ± 5 % 30 ma maximum Click torque 7.35 mn m ±.5 maximum (75 ± 5 gf cm) With click Output wave form Square wave Click number 5 Output phases A, B Shaft loading (Pull-push) 9. N maximum ( kgf) Resolution 5 operation force.45 ±.47 N (50 ± 50 gf) Phase difference of outputs A & B 90 ± 45 stroke 0.3 ± 0. mm Maximum frequency response 00 Hz Rotational life (Mechanical) million cycles Output signal Light source (High) 0 (Low) V minimum V maximum LED ing life Shaft loading (When mounting) Radial Axial million cycles 4.90 N maximum (500 gf).94 N maximum (300 gf) Net weight Approx. g characteristics Strength of tighten screw N m {0. kgf cm} maximum Maximum contact rating Contact resistance Note) Manual setting only. DC5 V, 0 ma Ω maximum Initial value Environmental characteristics Operating temp. range 0 ~ 50 C Storage temp. range Protection grade 0 ~ 80 C IP40 OUTPUT Click spot for 5P/R Output A Output B a b c a, b, c, d 00 s d Click spot CW The click spot is located somewhere outputs A & B are at Lo level.

3 RECK/RECL/RECM RELIABILITY TEST The output shall satisfy the criteria below after the following tests. Test item Test conditions Vibration Amplitude :.5 mm or 98. m/s (0 G) whichever is smaller. 0 ~ 500 Hz excursion 5 min/cycle, 8 cycles each for X, Z, directions. Shock High temperature exposure Low temperature exposure Humidity Thermal shock Power ON Power ON 3 times each in directions (X, Z) at 490 m/s (50 G), ms. 80 C 9 h 50 C 9 h 0 C 9 h (To be measured after leaving samples for h at normal temperature and humidity after the test.) 0 C 9 h C Relative humidity (To be measured after wiping out moisture and leaving samples for h at normal temperature and humidity after the test.) To be done 0 cycles with the following condition (To be measured after leaving samples for h at normal temperature and humidity after the test.) C C OUTLINE DIMENSIONS Unless otherwise specified, tolerance: ± 0.4 (Unit: mm) Single shaft and PIN HEADER Accessories M9P = ± ± MAX M9 P = Nut. Washer PIN ( 7. ) ( 9.4 ) (. ) PIN HEADER : Made by IRISO ELECTRONICS CO., LTD 908B - - Z03 - PT 8. (Locking type) PIN ASSIGNMENT Pin No. Without switch With switch Power 0 (V) Power 0 (V) N C For switch 3 N C For switch 4 Output B Output B 5 Output A Output A Power 5V Power 5V OUTPUT CIRCUITRY AND RECEIVING CIRCUITRY 4.7k Output Circuitry Transistor RN707JE eqivalent Schmitt IC TC7W4FK eqivalent Vcc (5V) Output "A", "B" GND (OV) Receiving Circuitry

4 RECK/RECL/RECM OUTLINE DIMENSIONS Unless otherwise specified, tolerance: 0.4 (Unit: mm) Single shaft and SOCKET Accessories ( 7.4 ) MAX M9P = ± ( 3. ) (.9 ) ( 7.5 ) SOCKET (SAMTEC) CES-0-0-S-S M9 P = Nut Washer Double shaft and SOCKET Option ± M9P = ± ( 9.5 ).35 ( 7.4 ).35.5 ( 3. ) 0.5 MAX (.9 ) ( 7.5 ) SOCKET (SAMTEC) CES-0-0-S-S ± ± ±0.5 Locking Ring OUTPUT CIRCUITRY AND RECEIVING CIRCUITRY PIN ASSIGNMENT Pin No. Function Power 0 (V) For switch 3 For switch 4 Output B 5 Output A Power +5 V Output Circuitry.k Receiving Circuitry Transistor RN707JE eqivalent Schmitt IC TC7W4FK eqivalent Vcc (5V) Output "A", "B" GND (OV)

5 RECK/RECL/RECM Option Available mounting on PC board with Snap-in Holder as an optional item separately ±0. 3 With Snap-in Holder PIN No Mounting hole dimentions Tolerance : ±0. Thickness : t =.

MANUAL SETTING TYPE OPTICAL ENCODERS RE C W 20 D Model Size φ 20 mm. Without click. With click. Without click. With click.

MANUAL SETTING TYPE OPTICAL ENCODERS RE C W 20 D Model Size φ 20 mm. Without click. With click. Without click. With click. MANUAL SETTING TYPE REC/RES FEATURES Contactless, manual adjustment only Compact, light weight (REC2, REC2C, REC2D, RE2D) Panel seal type (RESW2D, RE2D) RoHS compliant RoHS compliant PART NUMBER DESIGNATION