Review of Silicon Inner Tracker

Size: px

Start display at page:

Download "Review of Silicon Inner Tracker"

Christiana Wells
5 years ago
Views:

1 Review of Silicon Inner Tracker H.J.Kim (KyungPook National U.)

2 Talk Outline Configuration optimization of BIT and FIT Silicon Sensor R&D Electronics R&D Summary and Plan Detail study will be presented by E.Won 1) A Simulation Study of Silicon IT for GLD, Tues 1:30pm 2) Status of DSSD R&D for Inner Tracking, Thurs. 1:30-1:50

3 IT Collaboration for GLD Kyungpook/ Seoul Nat. Univ. Configuration optimization mask design DSSD simulation Sensor characterization Radiation damage study Korea/ Chonnam Univ. Configuration study hybrid development Readout Electronics 4 faculty members and 7 graduate students. (Not all are in full time)

4 Configuration Barrel Inner Tracker design optimization Forward Inner Tracker baseline design Endcap Silicon Tracker between TPC and CAL Background study Single side vs Double side SD IT Optimization for physics improvement

5 GLD Geometry (vertex and tracking only) TPC 260 cm (150 cm for TESLA) VTX Endcap Calorimeter place for endcap trackers IT CAD drawing by S.K.Park items ACFA8 snowmass barrel IT 4 layers 4 layers forward IT did not exist 7 layers software gld v1 various updates

6 Barrel/Forward Intermediate Trackers ( snowmass parameters ) Barrel IT spatial resolution 10 µm 4 layers (thickness 561 µm Silicon strip) r=9 cm (innermost), 30 cm (outermost) half z = 18.5 cm (innermost), 62 cm (outermost) cosθ <0.9 Beam Pipe BIT FIT FIT Forward IT spatial resolution 10 µm 7 layers (thickness 561 µm Silicon strip)

7 e+e- ZH, ZZ Study (ongoing) GLD default configuration - input m H = 120 GeV + PYTHIA + Geant4 ee ZH ACFA8 result Y.I.Kim ee ZZ We have been (and will be) working on roles of IT in terms of physics...

8 With and W/O IT ACFA8 result Geant4/single (cosθ=0) TPC only resolution does not deteriorate at low pt for TPC+IT+VTX due to z information from VTX TPC+VTX TPC+IT+VTX 1 GeV Without IT: 5 x 10-5 (GeV) -1 (high momentum limit) With IT: 4 x 10-5 (GeV) -1 H. Ha

9 Number of layers vs. resolution Geant4/single (cosθ=0) ACFA8 result 2 layer option 4 layer (default) 5 layer H. Ha 4 layer (default) is probably enough

10 Number of layers vs. resolution (forward) This plot is from a fast sim. (Kalman filter in but no Geant4) with snowmass parameters without forward 4 layer option seems slightly better at low p T 4 layers only (2,4,6 removed) default (7 layers) Y.I.Kim

11 Resolution vs. p T with snowmass parameters

12 Silicon sensor Double side, single side sensor and pxiel sensor Characterization of DSSD sensor and S/N DC vs AC type Radiation damage

13 DSSD Schematic

14 DSSD Parameters

15 N-side Design 64ch 50µm pitch 512ch 50µm pitch 32ch 50µm pitch 1x1cm 2 PIN diode 16ch 50µm pitch For SDD R&D Rear-side of SSD Pixel Array

8-50nA/strip @100V No extremely Leaky P-strips

16 DSSD s from Latest Fab out P-side IV P-side Guard Ring ~ All P-strips ~ No extremely Leaky P-strips Full Depletion Voltage ~100V Operation Voltage ~120V CV

17 Sr-90 beta Source Test Radiation Source ( 90 Sr β) Test Test Si SiDetector Reference Detector Data acquisition Trigger Pedestal sigma = 15.9 S/N = 25

18 Sensor Irradiation Test cyclotron in Korea Institute of Radiological and Medical Sciences s : 35MeV proton cyclotron

19 I/V before and after irradiation BEAM TEST_C3T3_IV _Ps ide_10^12 BEAM TEST_G5T2_IV_Pside_10^ Leakage Current (na) Rerverse Bias (V ) C3T3 1s t_ nd Leakage Current (na) Rervers e Bias (V ) G5T2 1s t_ nd BEAM TEST_E3T2_IV_Pside_10^14 BEAM TEST_E3T3_IV_Pside_10^ Leakage Current (na) Rervers e Bias (V ) E3T2 1s t_ nd Leakage Current (na) Rervers e Bias (V ) E3T3 1s t_ nd

20 Electronics & support structure PreAmp (+shaping and holder with VA) Hibrid board (control +HV) FADC New Readout Electronics with pipeline Long ladder issue (S/N ) Support Structure

21 Status of Hybrid Board We mounted latest fab out DSSDs to the hybrid (August 9) VA1 + RC sensor channel DSSD Wire bonding done (August 11) pads VA : by a company (LP electronics in Korea) VA RC, RC DSSD : done by a KEK expert (T.Tsuboyama) DSSD RC VA We are ready to get the MIP signal!

22 Summary A lot of progress on BIT and FIT Configuration since ACFA8 1) BIT Optimization 2) FIT baseline configuration Silicon Sensor R&D is going as planned. 1) DSSD design and fabrication 2) Characterization & S/N OK 3) Radiation damage test results. Readout electronics is in progress.

23 Future plan for study Configuration 1.Endcap Silicon Tracker between TPC and CAL 2.Background study 3.Single side vs Double side SD 4. IT Optimization for physics improvement Silicon Sensor R&D 1. Single side sensor (and pixel sensor) 2. AC type 3. Larger wafer (6,, 8 ) 8 Readout electronics & Support Structure 1.New Readout Electronics with pipeline 2. Long ladder issue (S/N, shaping time)

Development of Double-sided Silcon microstrip Detector. D.H. Kah*, H. Park, H.J. Kim (BAERI JikLee (SNU) E. Won (Korea U)

Development of Double-sided Silcon microstrip Detector D.H. Kah*, H. Park, H.J. Kim (BAERI JikLee (SNU) E. Won (Korea U), KNU) 2005 APPI dhkah@belle.knu.ac.kr 1 1. Motivation 2. Introduction Contents 1.