Westalee Design by Sew Steady - Item Price List - March 31, 2016 Description

Transcription

1 WF-PKG NEW, HS - RULER FOOT WF-PKG NEW, HSS - RULER FOOT WF-PKG NEW, LS - RULER FOOT WF-PKG NEW, MS - RULER FOOT WF-PKG, HS - RULER FOOT WF-PKG, HSS - RULER FOOT WF-PKG, LS - RULER FOOT WF-PKG, MS - RULER FOOT ( ) - RULER FOOT STARTER PACKAGE-HIGH SHANK (INCLUDES RULER FOOT, 12" ARC TEMPLATE, STABLE TAPE STRIP & ADJUSTMENT GUIDE) 3 $ ( ) - RULER FOOT STARTER PACKAGE-HIGH SHANK SPECIAL (INCLUDES RULER FOOT, 12" ARC TEMPLATE, STABLE TAPE STRIP & ADJUSTMENT GUIDE) 3 $ ( ) - RULER FOOT STARTER PACKAGE-LOW SHANK (INCLUDES RULER FOOT, 12" ARC TEMPLATE, STABLE TAPE STRIP & ADJUSTMENT GUIDE) 3 $ ( ) - RULER FOOT STARTER PACKAGE-MEDIUM SHANK (INCLUDES RULER FOOT, 12" ARC TEMPLATE, STABLE TAPE STRIP & ADJUSTMENT GUIDE) 3 $ RULER FOOT STARTER PACKAGE- HIGH SHANK. (HIGH SHANK RULER FOOT, 12" ARC TEMPLATE, 3" FEATHER, STABLE TAPE STRIP, ADJUSTMENT GUIDE) 3 $ RULER FOOT STARTER PACKAGE - HIGH SHANK SPECIAL (HIGH SHANK SPECIAL RULER FOOT, 12" ARC TEMPLATE, 3" FEATHER, STABLE TAPE STRIP, ADJUSTMENT GUIDE) 3 $ RULER FOOT STARTER PACKAGE- LOW SHANK (INCLUDES LOW SHANK RULER FOOT, 12" ARC TEMPLATE, 3" FEATHER, STABLE TAPE STRIP, ADJUSTMENT GUIDE) 3 $ RULER FOOT STARTER PACKAGE- MEDIUM SHANK (INCLUDES MEDIUM SHANK RULER FOOT, 12" ARC TEMPLATE, 3" FEATHER, STABLE TAPE STRIP, ADJUSTMENT GUIDE) 3 $ WT-Feather Template [Low Shank, High Shank, or Long Arm] ( )-Feather Template - CHOOSE NO. F2, F3, F4, F5 4 $ WT-FS4 - Feather Set -HS ( )- Feather Template Set - High Shank - 4 Piece Set (2", 3", 4", 5") 4 $ WT-FS4 - Feather Set -LA ( )- Feather Template Set - Long Arm Shank - 4 Piece Set (2", 3", 4", 5") 4 $ WT-FS4 - Feather Set -LS ( )- Feather Template Set- Low Shank - 4 Piece Set (2", 3", 4", 5") 4 $ WT-Fspine10 - FEATHERS SPINE-HS ( )-Feather Template Spine-High Shank-1.5" Deep x 10" Long 4 $ WT-Fspine10 - FEATHERS SPINE-LA ( )-Feather Template Spine-Long Arm Shank-1.5" Deep x 10" Long 4 $ WT-Fspine10 - FEATHERS SPINE-LS ( )-Feather Template Spine-Low Shank-1.5" Deep x 10" Long 4 $ WT-Fspine12 - FEATHERS SPINE [Low Shank, High Shank, or Long Arm] ( )-Feather Template Spine 1.5" Deep x 12" Long 4 $ WT-WQTSS-6 - SAMPLERSET1-HS WT-WQTSS-6 - SAMPLERSET1-LA ( )-Sampler Template Set-High Shank - A set of 6 templates to get you started with Ruler work on your domestic sewing machine: 1 x 6" Spiral 1 x Spin-e-fex No. 4 1 x Circles on Quilts Spinning Wheel No x 4" Arc 1 x Clamshell Bonus 2 Inside... 4 $ ( )-Sampler Template Set-Long Arm Shank - A set of 6 templates to get you started with Ruler work on your long arm sewing machine: 1 x 6" Spiral 1 x Spin-e-fex No. 4 1 x Circles on Quilts Spinning Wheel No x 4" Arc 1 x Clamshell Bonus Inside Circ... 4 $ ( )-Sampler Template Set-Low Shank - A set of 6 templates to get you started with Ruler work on WT-WQTSS-6 - SAMPLERSET1-LS your domestic sewing machine: 1 x 6" Spiral 1 x Spin-e-fex No. 4 1 x Circles on Quilts Spinning Wheel No x 4" Arc 1 x Clamshell Bonus 2 Inside... 4 $ WT-SC.5" - Simple Circles [Low Shank, High Shank, or Long Arm] ( )Simple Circles - 1/2" 5 $ WT-SC 1.0" - Simple Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Circles - 1" 5 $ WT-SC 1.5" - Simple Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Circles - 1.5" 5 $ WT-SC 2.0" - Simple Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Circles - 2" 5 $ WT-SC Simple Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Circles - 2.5" 5 $ WT-SC 3.0" - Simple Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Circles - 3" 5 $ WT-SC 3.5" - Simple Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Circles - 3.5" 5 $ WT-SC 4" - Simple Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Circles - 4" 5 $ WT-SC SC.5 SC1 SC1.5 SC2 - SET [Low Shank, High Shank, or Long Arm] ( )-Simple Circles (SC 0.5", 1", 1.5", 2") - Set of 4 5 $ WT-SC SC2.5 SC3 SC3.5 SC4 - SET [Low Shank, High Shank, or Long Arm] ( )-Simple Circles (SC 2.5", 3", 3.5", 4") - Set of 4 5 $ WT-SH- SET - Simple Hexagon Set [Low Shank, High Shank, or Long Arm] ( )-Simple Hexagon - Set of 3 5 $ WT-SH-1 1"x2" - Simple Hexagon [Low Shank, High Shank, or Long Arm] ( )-Simple Hexagon (1" x 2") 5 $ WT-SH-1 2"x4" - Simple Hexagon [Low Shank, High Shank, or Long Arm] ( )-Simple Hexagon (2" x 4") 5 $ Page 1 of 9

2 WT-SH-1 5"x3" - Simple Hexagon [Low Shank, High Shank, or Long Arm] ( )-Simple Hexagon (1.5" x 3") 5 $ WT-SO- SET - Simple Ovals Set p [Low Shank, High Shank, or Long Arm] ( )-Simple Ovals - Set of 3 5 $ Ovals p [Low Shank, High Shank, or Long Arm] ( )-Simple Ovals (1" x 2") 5 $ Ovals [Low Shank, High Shank, or Long Arm] ( )-Simple Ovals (2" x 4") 5 $ WT-SO-1-5"x3" Simple Ovals [Low Shank, High Shank, or Long Arm] ( )-Simple Ovals (1.5" x 3") 5 $ WT-SSC-Simple Semi Circles [Low Shank, High Shank, or Long Arm] ( )-Simple Semi Circles 5 $ WT-CBL 2-1-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop Length_2x1 - A 2" wide loop 1" high. 6 $ WT-CBL 2-1-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop Length_2x1 - A 2" wide loop 1" high. 6 $ WT-CBL 2-1-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop Length_2x1 - A 2" wide loop 1" high. 6 $ WT-CBL 2-2-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop Length_2x2 - A 2" wide loop 2" high. 6 $ WT-CBL 2-2-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop Length_2x2 - A 2" wide loop 2" high. 6 $ WT-CBL 2-2-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop Length_2x2 - A 2" wide loop 2" high. 6 $ WT-CBL 2-3-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop Length_2x3 - A 2" wide loop 3" high. 6 $ WT-CBL 2-3-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop Length_2x3 - A 2" wide loop 3" high. 6 $ WT-CBL 2-3-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop Length_2x3 - A 2" wide loop 3" high. 6 $ WT-CBL 2-4-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop Length_2x4 - A 2" wide loop 4" high. 6 $ WT-CBL 2-4-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop Length_2x4 - A 2" wide loop 4" high. 6 $ WT-CBL 2-4-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop Length_2x4 - A 2" wide loop 4" high. 6 $ WT-CBL 2-5-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop Length_2x5 - A 2" wide loop 5" high. 6 $ WT-CBL 2-5-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop Length_2x5 - A 2" wide loop 5" high. 6 $ WT-CBL 2-5-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop Length_2x5 - A 2" wide loop 5" high. 6 $ WT-CBL 2-6-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop Length_2x6 - A 2" wide loop 6" high. 6 $ BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop Length_2x6 - A 2" wide loop 6" high. 6 $ WT-CBL 2-6-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop Length_2x6 - A 2" wide loop in 6" high. 6 $ WT-CBL2 3-1-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 1 Length_3x1 - A 2" wide loop 1" high. 6 $ WT-CBL2 3-1-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 1 Length_3x1 - A 2" wide loop 1" high. 6 $ WT-CBL2 3-1-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 1 Length_3x1 - A 2" wide loop 1" high. 6 $ WT-CBL2 3-2-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 1 Length_3x2- A 2" wide loop 2" high. 6 $ WT-CBL2 3-2-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 1 Length_3x2- A 2" wide loop 2" high. 6 $ WT-CBL2 3-2-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 1 Length_3x2- A 2" wide loop 2" high. 6 $ WT-CBL2 3-3-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 1 Length_3x3- A 2" wide loop 3" high. 6 $ WT-CBL2 3-3-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 1 Length_3x3- A 2" wide loop 3" high. 6 $ WT-CBL2 3-3-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 1 Length_3x3- A 2" wide loop 3" high. 6 $ Page 2 of 9

3 WT-CBL2 3-4-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 1 Length_3x4- A 2" wide loop 4" high. 6 $ WT-CBL2 3-4-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 1 Length_3x4- A 2" wide loop 4" high. 6 $ WT-CBL2 3-4-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 1 Length_3x4- A 2" wide loop 4" high. 6 $ WT-CBL2 3-5-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 1 Length_3x5- A 2" wide loop 5" high. 6 $ WT-CBL2 3-5-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 1 Length_3x5- A 2" wide loop 5" high. 6 $ WT-CBL2 3-5-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 1 Length_3x5- A 2" wide loop 5" high. 6 $ WT-CBL2 3-6-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 1 Length_3x6- A 2" wide loop 6" high. 6 $ WT-CBL2 3-6-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 1 Length_3x6- A 2" wide loop 6" high. 6 $ WT-CBL2 3-6-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 1 Length_3x6- A 2" wide loop 6" high. 6 $ WT-CBL3 2-2-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 2 Length_2x2 - A 2" wide loop 2" high. 6 $ WT-CBL3 2-2-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 2 Length_2x2 - A 2" wide loop 2" high. 6 $ WT-CBL3 2-2-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 2 Length_2x2 - A 2" wide loop 2" high. 6 $ WT-CBL3 2-3-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 2 Length_2x3 - A 2" wide loop 3" high. 6 $ WT-CBL3 2-3-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 2 Length_2x3 - A 2" wide loop 3" high. 6 $ WT-CBL3 2-3-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 2 Length_2x3 - A 2" wide loop 3" high. 6 $ WT-CBL3 2-4-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 2 Length_2x4 - A 2" wide loop 4" high. 6 $ WT-CBL3 2-4-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 2 Length_2x4 - A 2" wide loop 4" high. 6 $ WT-CBL3 2-4-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 2 Length_2x4 - A 2" wide loop 4" high. 6 $ WT-CBL3 2-5-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 2 Length_2x5 - A 2" wide loop 5" high. 6 $ WT-CBL3 2-5-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 2 Length_2x5 - A 2" wide loop 5" high. 6 $ WT-CBL3 2-5-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 2 Length_2x5 - A 2" wide loop 5" high. 6 $ WT-CBL3 2-6-CONTIN BORDER - HS [High Shank] ( )-Continuous Borders Loop 2 Length_2x6 - A 2" wide loop 6" high. 6 $ WT-CBL3 2-6-CONTIN BORDER - LA [Longarm Shank] ( )-Continuous Borders Loop 2 Length_2x6 - A 2" wide loop 6" high. 6 $ WT-CBL3 2-6-CONTIN BORDER - LS [Low Shank] ( )-Continuous Borders Loop 2 Length_2x6 - A 2" wide loop 6" high. 6 $ WT-B2BC-Back to Back Circles [Low Shank, High Shank, or Long Arm] ( )-Back to Back Circles (1,3,4,6)..CHOOSE: 1, 3, 4, $ [Low Shank, High Shank, or Long Arm] ( )-Between The Lines - CHOOSE SIZE: BTL.5", BTL-1", WT-BTL - Between The Lines BTL-1.5", BTL-2" 7 $ WT-BTL- Between The Lines SET [Low Shank, High Shank, or Long Arm] ( )-Between the Lines Set (BTL 0.5",1",1.5",2")..Set of 4 7 $ WT-CMC-1 - Corner Mark Circles [Low Shank, High Shank, Longarm] Corner Mark Circles - 2 Piece Set (12" and 10"). ( ) 7 $ WT-CMC-2 - Corner Mark Circles [Low Shank, High Shank, Longarm] Corner Mark Circles - 3 Piece Set (8", 6" & 4") ( ) 7 $ WT-CMO-1 - Corner Mark Ovals [LONG ARM, LOW SHANK, HIGH SHANK] Corner Mark Oval - Set of 2 (10" & 12"). ( ) 7 $ WT-CMO-2 - Corner Mark Ovals [LONG ARM, LOW SHANK, HIGH SHANK] Corner Mark Oval - Set of 3 - (8", 6" & 4"). ( ) 7 $ Border [Low Shank, High Shank, or Long Arm] ( )-Continuous Heart Border Tool (Small) - 8 $ WT-CHB-2 Contin Heart Border [Low Shank, High Shank, or Long Arm] ( )-Continuous Heart Border Tool (Large) - 8 $ Page of 9

4 WT-CHC - Curved Cross Hatch [Low Shank, High Shank, or Long Arm] Curved Cross Hatch CHOOSE: CHC-1, 2, 3, 4 8 $ WT-PB2 - Persian Border [Low Shank, High Shank, or Long Arm] Persian Border Tool - 2 Piece Nested Set 8 $ WT-C12- Curves -12" [Low Shank, High Shank, or Long Arm] ( )-Curves-12" CHOOSE: C12-1, C12-2, C12-3,C $ WT-C6 - Curves -6" [Low Shank, High Shank, or Long Arm] ( )-Curves-6" CHOOSE: C6-1, C6-2, C6-3, C6-4 9 $ WT-IOC12 - Inside Out Curve [Low Shank, High Shank, or Long Arm] ( )-Inside Out Curve - 12" CHOOSE: IOC12-1, IOC12-2, IOC12-3, IOC $ WT-IOC6 - Inside Out Curve [Low Shank, High Shank, or Long Arm] ( )-Inside Out Curve - 6" CHOOSE: IOC6-1, IOC6-2, IOC6-3, IOC6-4 9 $ WT-12A - ARCS 12" [Low Shank, High Shank, or Long Arm] ( )-12" Arc 10 $ WT-3A - ARCS 3" [Low Shank, High Shank, or Long Arm] ( )-3" Arc 10 $ WT-4A - ARCS 4" [Low Shank, High Shank, or Long Arm] ( )-4" Arc 10 $ WT-5A - ARCS SET [Low Shank, High Shank, or Long Arm] ( )-Arcs Set - 5 Piece Set (3", 4", 6", 8", 12") 10 $ WT-6A - ARCS 6" [Low Shank, High Shank, or Long Arm] ( )-6" Arc 10 $ WT-8A - ARCS 8" [Low Shank, High Shank, or Long Arm] ( )-8" Arc 10 $ WT-S1-2 - Serpentine [LOW SHANK, HIGH SHANK, LONG ARM] Serpentine S1-2 (S1:1-1/2" Deep - S2:2" Deep) ( ) 10 $ WT-S3-4 - Serpetine [LOW SHANK, HIGH SHANK, LONG ARM] Serpentine S3-4 (S3:2" Deep - S4:1" Deep) ( ) 10 $ WT-S5-6 - Serpentine [LOW SHANK, HIGH SHANK, LONG ARM] Serpentine S5-6 (S5:1" Deep - S6:1-1/2" Deep) ( ) 10 $ WT-S7-8 - Serpentine [LOW SHANK, HIGH SHANK, LONG ARM] Serpentine S7-8 (S7:1/2" Deep - S8:1" Deep) ( ) 10 $ WT-MAC-1 - Multi Arc Rulers - [Low Shank, High Shank, or Long Arm] ( )-Multi Arc Rulers- Shallow Ovals (Includes: 1", 2", 3", 1 4", 5", 6" Curves) 11 $ WT-MAC-2 - Multi Arc Rulers - [Low Shank, High Shank, or Long Arm] ( )-Multi Arc Rulers- Circles (Includes: 1", 2", 3", 4", 5", 6" 2 Curves) 11 $ WT-MAC-3 - Multi Arc Rulers - [Low Shank, High Shank, or Long Arm] ( )-Multi Arc Rulers- Deep Ovals (Includes: 1", 2", 3", 4", 3 5", 6" Curves) 11 $ WT-MAC-4 - Multi Arc Rulers - [Low Shank, High Shank, or Long Arm] ( )-Multi Arc Rulers- Deep Ovals 2 (Includes: 1", 2", 3", 4 4", 5", 6" Curves 11 $ WT-SR - Straight Rulers - 4" WT-SR - Straight Rulers - 6" WT-SR - Straight Rulers - 8" WT-SR - Straight Rulers 12" - 1 WT-SR - Straight Rulers 12"- 2 WT-SR - Straight Rulers 18"- 1 WT-SR - Straight Rulers 18"- 2 WT-CC1 - Clamshell Template WT-CC12X3OVAL WT-CC2 - Clamshell Template (Low Shank, High Shank, Longarm) < > Straight Rulers - 4" (4 Sizes)..Choose Size: 1.5x4, 2x4, 2.5x4, 3x $ (Low Shank, High Shank, Longarm) < > Straight Rulers - 6" (4 Sizes)..Choose Size: 1.5x6, 2x6, 2.5x6, 3x6 11 $ (Low Shank, High Shank, Longarm) < > Straight Rulers - 8" (4 Sizes)..Choose Size: 1.5x8, 2x8, 2.5x8, 3x8 11 $ (Low Shank, High Shank, Longarm) < > Straight Rulers - 12" (2 Sizes)..Choose Size: 1.5x12, 2x12 11 $ (Low Shank, High Shank, Longarm) < > Straight Rulers - 12" (2 Sizes)..Choose Size: 2.5x12, 3x12 11 $ (Low Shank, High Shank, Longarm) < > Straight Rulers - 18" (2 Sizes)..Choose Size: 1.5x18, 2x18 11 $ (Low Shank, High Shank, Longarm) < > Straight Rulers - 18" (2 Sizes)..Choose Size: 2.5x18, 3x18 11 $ [Low Shank, High Shank, or Long Arm] ( )-Clamshell Template - 2-Sided 12-1/2"..(CC1.75 X 1.5 & 1X 2") $ [Low Shank, High Shank, or Long Arm] ( )-12" x 3" Oval Template - 1/4" reference lines up to 3". Curve is from 12" section of Oval 12 $ [Low Shank, High Shank, or Long Arm] ( )-Clamshell Template - 2-Sided 12-1/2"..(CC2.5 X 1 & 1.5 X 3") $ WT-OC-1 - Oval Clamshell [Low Shank, High Shank, or Long Arm] ( )-Oval Clamshell Template (OC- 1) 12 $ WT-OC-2 - Oval Clamshell [Low Shank, High Shank, or Long Arm] ( )-Oval Clamshell Template (OC- 2) 12 $ Clamshell [Low Shank, High Shank, Long Arm] Persian Clamshell (PC-01) 12" Length 12 $ WT-SOC1 - Squat Oval Clamshell [Low Shank, High Shank, or Long Arm] ( )-Squat Oval Clamshell (SOC1) 12 $ WT-SOC2 - Squat Oval Clamshell [Low Shank, High Shank, or Long Arm] ( )-Squat Oval Clamshell (SOC2) 12 $ Page 4 of 9

5 WT-WCR.75A-Continuous WT-WCR 1.5 A-Continuous WT-WCR 1.5B-Continuous WT-WCR 1.5C-Continuous WT-WCR 1.5D-Continuous WT-WCR 2.5A-Continuous WT-WCR 2.5B-Continuous WT-WCR 2.5C-Continuous WT-WCR 2.5E-Continuous WT-WCR 5.5A-Continuous WT-WCR 5.5B-Continuous [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template.75A - 3/4" high by 2 1/4" wide. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 1.5A - 1 1/2" high by 3" wide. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 1.5B - 1 1/2" high by 4" wide. Optional echo built into template $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 1.5C - 1 1/2" high by 5" wide. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 1.5D - 1 1/2" high by 6" wide. Optional echo built into template $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 2.5A - 2 1/2" high by 3" wide. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 2.5B - 2 1/2" high by 4" wide. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 2.5C - 2 1/2" high by 5" wide. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 2.5E - 2 1/2" high. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 5.5A - 5 1/2" high by 5" wide. Optional echo built into template. 13 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 5.5B - 5 1/2" high by 3" wide. Optional echo built into template. 13 $ WA-SLD Stitching Line Discs Stitching Line Discs - Pack of 8 - Including 4 different pen hole sizes. 14 $ WR-BTF - Bound To Fit Bound To Fit - Cut $ WT-LW - Line Works [Low Shank, High Shank, or Long Arm] Line Works CHOOSE: 1,0.5, $ WA-CS-1 - Corner Selector Corner Selector 15 $ Stable Tape - Stable Tape is a self adhesive tape to help keep rulers and templates in place. WA-ST STABLE TAPE Great for both domestic and longarm users. Packets of 5 Strips - cut to size 15 $ WA-WFEG - Echo Guide Ruler Foot Echo Guide Set 3 Piece Set - 1/2", 3/4", and 1" Guides 15 $ WA-TRA - The Right Angle The Right Angle Ruler - Etched with ¼ lines and 45-degree angles. 15 $ WT-BBCS - Mini Clamshell [Low Shank, High Shank, or Long Arm] ( )-Mini Clamshell - 4 Sizes of Half Circles or Clams. One on each side of the ruler. (1", 2", 3", 4") 15 $ WT-BBMC - Mini Curve [Low Shank, High Shank, or Long Arm] ( )-Mini Curve - 1/4" apart parallel lines.. 15 $ WA-CHG16" - Cross Hatch Guide Cross Hatch Guide 16" - Long Arm Tool. (Black fence must be purchased separately.) 16 $ WA-CHG22" - Cross Hatch Guide Cross Hatch Guide 22" - Long Arm Tool. (Black fence must be purchased separately). 16 $ WA-CHS CrossHair Sq Cross Hair Square 12.5" - Cross Hair Ruler..Use this 12-1/2 x 12-1/2 Square to mark center along with up to 64 different line markings on a block. 16 $ CIRCLEWORKS CIRCLEWORKS (LONGARM ONLY). CHOOSE: 12" OR 36" 16 $ WA-H - ADD-A-HANDLE ADD-A-HANDLE - Pack of 2 large, 2 medium and 2 small. 16 $ WA-LRB -Little Rotation Bobs Little Rotation Bobs (12 & 16 Rotations) 16 $ WA-MCHG- Mini Cross Hatch Mini Cross Hatch Guide - The Mini Cross Hatch Guide is for midarm and domestic machines in Guide frames. 16 $ WWR10 Ruler/Template Rack - Minimum 10 rulers or templates capacity. 16 $ Spacing Gauge - Increments of 1/8, 1/4, 1/2 and 1 spaces when using rulers and templates. WA-SPG-Spacing Gauge Also use to adjust height of foot during install. 16 $ Longarm Adjustable Storage Tray - For all those things you want to reach quickly, (or find) when your are quilting, we have manufactured a practical sized Utility Tray. Adjustable to fit even the WA-Utility Tray largest Quilt Table. Sitting over the rollers and next t $ WT-COQ-SET OF 2 ( ) HS ( )-Circles on Quilts - 2.5" thru 11.5" Template Set-High Shank for Sit Down Longarm..(Set of 2 Templates 1" increments) 21 $ WT-COQ-SET OF 2 ( ) LA WT-COQ-SET OF 2 ( ) LS ( )-Circles on Quilts - 2.5" thru 11.5" Template Set-LONG ARM-for Sit Down Longarms not being used on quilting frame (Set of 2 Templates 1" increments) 21 $ ( )-Circles on Quilts - 2.5" thru 11.5" Template Set-Low Shank for Sit Down Longarm..(Set of 2 Templates 1" increments) 21 $ WT-COQ-SET OF 2 (2-12) ( )-Circles on Quilts - 2" thru12" Template Set-High Shank-for Sit Down Longarm..(Set of 2 HS Templates 1" increments) 21 $ ( )-Circles on Quilts - 2" thru12" Template Set-LONG ARM-for Sit Down Longarms not being WT-COQ-SET OF 2 (2-12) LA used on quilting frame (Set of 2 Templates 1" increments) 21 $ ( )-Circles on Quilts - 2" thru12" Template Set-Low Shank-for Sit Down Longarm..(Set of 2 WT-COQ-SET OF 2 (2-12) LS Templates 1" increments) 21 $ Page of 9

6 WT-COQT - FRAME ONLY [Long Arm, Gammil, or APQS] ( )-Circles on Quilts Template - For use with Long-arm Quilting machines on a Frame. Available for Nolting, APQS, Gammil, Innova, Handi Quilter and others. 21 $ WT-SFX-SCQ1.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-Fex Curly Q Template (1.5") 22 $ WT-SFX-SCQ10.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (10.5") 22 $ WT-SFX-SCQ11.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (11.5") y 22 $ Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (11.5"-Wide) 22 $ WT-SFX-SCQ2.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (2.5") 22 $ WT-SFX-SCQ3.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (3.5") 22 $ WT-SFX-SCQ4.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (4.5") 22 $ WT-SFX-SCQ5.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (5.5") 22 $ WT-SFX-SCQ6.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (6.5") 22 $ WT-SFX-SCQ7.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (7.5") 22 $ WT-SFX-SCQ8.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (8.5") 22 $ WT-SFX-SCQ9.5" - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template (9.5") 22 $ WT-SFXF 8x4 - Feather Set- HS ( )-Spin-e-fex Feather Template Set - High Shank (Set of 4) Value $80 23 $ WT-SFXF 8x4 - Feather Set- LONG ( )-Spin-e-fex Feather Template Set -LONGARM (Set of 4) Value $80 23 $ WT-SFXF 8x4 - Feather Set- LS ( )-Spin-e-fex Feather Template Set - Low Shank (Set of 4) Value $80 23 $ WT-SFXF8-3.5 Feather [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Feather Templates-3.5" 23 $ WT-SFXF8-4.5 Feather [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Feather Templates-4.5" 23 $ WT-SFXF8-5.5 Feather [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Feather Templates-5.5".. 23 $ WT-SFXF8-7.5 Feather [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Feather Template-7.5" 23 $ WT-SFXSN1-2 Snowflake - Set 1 [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Snowflake (Set #1 Includes: Snowflake Template 1 & 2 w/ 4 keys) 23 $ WT-SFXSN3-4 Snowflake - Set 2 [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Snowflake (Set #2 Includes: Snowflake Template 3 & 4 w/ 4 keys) 23 $ WT-SFXSN5-6 Snowflake - Set 3 [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Snowflake (Set #3 Includes: Snowflake Template 5 & 6 w/ 4 keys) 23 $ WT-SFXSN7-8 Snowflake - Set 4 [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Snowflake (Set #4 Includes: Snowflake Template 7 & 8 w/ 4 keys) 23 $ WT-SFXSNSETx8 Snowflake [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Snowflake (Set of 8 Templates) 23 $ WT-COQSW - Spinning Wave [Low Shank, High Shank, or Long Arm] ( )-Circles on Quilts - Spinning Wave Template Choose: NO. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, $ WT-SAE- SPIN AND ECHO [Low Shank, High Shank, or Long Arm] ( )-Spin and Echo 6.5" High..CHOOSE NO: 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,15A,16,17 29 $ WR-12" HSTRS-HALF SQUARE TRI 6" - 12" Half Square Triangle 30 $ WR-12x12 Adjust Straight Ruler 12½" x 12½" - Adjustable Block Ruler with Locking Fabric Guide 30 $ WR-12x6 Adjust Straight Ruler 12½" x 6½" - Adjustable Straight Locking Ruler 30 $ WR-18x6 Adjust Straight Ruler 18" x 6½" - Adjustable Straight Locking Ruler 30 $ WR-18x8 Adjust Straight Ruler 18" x 8½" - Adjustable Straight Locking Ruler 30 $ WR-24x6 Adjust Straight Ruler 24" x 6½" - Adjustable Straight Locking Ruler 30 $ WR-24x8 Adjust Straight Ruler 24" x 8½" - Adjustable Straight Locking Ruler 30 $ WR-6" QSTRS - QTR SQUARE TRI 6" Quarter Square Triangle 30 $ WR-7x6 Adjust Straight Ruler 7" x 6½" - Adjustable Straight Locking Ruler 30 $ WR- ADJRULERSTARTERSET Adjustable Ruler Starter Set - 3 Adjustable Straight Rulers and Free Block Patterns..Includes:..1-6" Adjustable Locking Quarter Square Triangle..1-6" Adjustable Locking Half Square Triangle..1-18" x 6.5" Adjustable Locking Straight Ruler 30 $ Page of 9

7 WR-ctri-2 - Setting Triangle Setting Triangle- 2" to 6" 30 $ WR-Qtri-2 - QTR SQUARE TRIANGLE Quarter Square Triangle- 2" to 6" 30 $ WR-stri-2 - CORNER SETTING TRI Corner Setting Triangle- 2" to 6" 30 $ x2 Brass Thumbscrews - Set of 2 31 $ WR-30ADJWEDGESET12" 30 Degree Wedge 6" to 12" - Wedge, an Adjustable Corner Triangle and a Trim Guide. 31 $ WR-30ADJWEDGESET24" 30 Degree Wedge 12" to 24" - Wedge, an Adjustable Corner Triangle and a Trim Guide. 31 $ WR-45ADJWEDGESET12" 45 degree Adjustable Wedge - 6" to 12" - Wedge and an Adjustable Corner Triangle. 31 $ WR-45ADJWEDGESET24" 45 degree Adjustable Wedge- 12" to 24" - A Wedge and an Adjustable Corner Triangle. 31 $ WR-60EDGEMINI Half Square Adjustable Triangle ½ to 3 - Half Square Adjustable Triangle ½ to 3 31 $ WR-60MINIEDGE 60 degree Border Triangle - This tool is the companion for the 60 degree triangle 2" to 6". I 31 $ WR-EQUTRI Mini 60 Equilateral Triangle ½ to 3 - This tool will cut finished sizes from 1/2" to 3". 31 $ WR-EQUTRIQUART Mini Quarter Square Adjustable Triangle ½"to 3" 31 $ WR-HALFSQTRIMINI Half Square Adjustable Triangle ½" to 3" - Half Square Adjustable Triangle ½ to 3 31 $ WR-Mini Adjust Locking Ruler 4" Mini 4" - Adjustable Locking Ruler 31 $ WA-DISPHGLAS "Disappearing Hourglass" The Pattern - This Quilt uses our 18". Adjustable Ruler and the 2" to 6". Adjustable Half Square Triangle. Measuring 58 1/2" x 58 1/2" 32 $ WA-MACHINE GUIDE Machine Sewing Guide - The Machine Sewing Guide will aid you in sewing straight seems when machine piecing. The guide is easily attached to any flatbed sewing machine. It will not mark your sewing machine. (Supplied with spare double sided tape strips) 32 $ WA-NOTLOGCABN "Not Quite a Log Cabin" The Pattern - 32 $ WA-SCANTGAUGE Scant 1/4" Seam Gauge - This Seam Gauge will enable you to position your sewing machine needle to a perfect scant 1/4" seam allowance. 32 $ "Shhhh... Don't tell anyone" by Leonie West - The Book, with more than 60 detailed photos, tips and techniques to help you achieve beautiful piecing, it is ideally suited to those beginning and WA-SSSHBOOK those of you still having difficulties with some areas of $ Stiletto - This little Tool makes it easy to to hold your pieces in place as the fabric goes under the needle. Great to use when sewing points and you do not want to stretch the bias edges. Sewing WA-STIL - STILETTO small pieces and using the Stiletto lets you easily con $ WA-TRIMGUIDE45 45 degree Diamond Trim Guide - The Diamond Trim Guide makes it quick and easy to trim the points from 45 degree diamonds. Making it easy to align and sew diamonds to each other. 32 $ WA-TRIMGUIDE60 60 degree Diamond Trim Guide - The Diamond Trim Guide makes it quick and easy to trim the points from 60 degree diamonds. Making it easy to align and sew diamonds to each other. 32 $ WA-TRIMGUIDESQ Square in the Square Trim Guide - The Guide makes it quick and easy to trim the points from Half Square and Quarter Square Triangles. Making it easy to align and sew blocks such as Square in a Square, Economy Patch and Twelve Triangles. 32 $ GUIDE 45 degree Diamond Trim Guide 32 $ GUIDE 60 degree Diamond Trim Guide 32 $ WR-MACHINE SEWING GUI Machine Sewing Guide.. 32 $ WR-Scant 1/4" Guide Scant 1/4" Seam Guide.. 32 $ Exploring the Pinwheel Block Set - Exploring the Pinwheel Set, a book with more than 80 different block designs, each with a quilt layout. While the book does not have patterns for every WA-PINWHEEBOOK design, it does tell you what tools to use for each block. There $ WR-PINWHEEL12" Pinwheel Block Set - Large (12") - A set of tools with average block size of 12". 33 $ WR-PINWHEEL6" Pinwheel Block Set - Small (6") - A set of tools with average block size of 6". 33 $ WR-STASHHALFSQ Half Square Triangle Stash Buster 34 $ WR-STASHHEX Hexagon Stash Buster Set 34 $ WR-STASHHOUSE House Stash Buster Set - Set contains one full house template and a half house template to finish off the row. 34 $ WR-STASHPIEC Pieced Equilateral Triangle Stash Buster Set - Set contains one triangle and half triangle to finish off the row. 34 $ Page 7 of 9

8 WR-STASHPUZZ Puzzler Stash Buster Set (choose size) - Available in a 4" and 2" set and a 3" and 1.5" set. Finished Sizes shown. 34 $ WR-STASHQRTSQ Quarter Square Triangle Stash Buster 34 $ Tumbler Stash Buster Set - Set contains one full template and a half template to finish off the WR-STASHTUMB row. 34 $ WA-WNCC Dresden Nested Centers WNCC - Dresden Nested Centres WNCC 35 $ WA-WNCS 1 Dresden Nested Centers WNCS 1 - Dresden Nested Centres WNCS 1 35 $ WA-WNCS 2 Dresden Nested Centers WNCS 2 - Dresden Nested Centres WNCS 2 35 $ WA-WNT2 Round Dresden Topper - Round Dresden Topper WNT 2 (CHOOSE POINT SIZE: 8, 10, 16, 20, 36) 35 $ WA-WNT3 Half Hex Dresden Topper - Half Hex Dresden Topper WNT 3 (CHOOSE POINT SIZE: 8, 10, 16, 20, 36) 35 $ WA-WNT4 Small Round Dresden Topper - Small Round Dresden Topper WNT 4 (CHOOSE POINT SIZE: 8, 10, 16, 20, 36) 35 $ WA-WNT5 Long Petal Dresden Topper - Long Petal Dresden Topper WNT 5 (CHOOSE POINT SIZE: 8, 10, 16, 20, 36) 35 $ WA-WNT7 Persian Dresden Topper - Persian Dresden Topper WNT 7 (CHOOSE POINT SIZE: 8, 10, 16, 20, 36) 35 $ WR-ADJISOSASHSET Adjustable Isosceles Sashing Ruler 35 $ WR-ADJISOSASHTRI Adjustable Isosceles Triangle 35 $ WR-DRES10 Dresden Plate - 10 Point - 10 Point Adjustable Dresden Plate 6" to 12" 35 $ WR-DRES16 Dresden Plate - 16 Point - 16 Point Adjustable Dresden Plate 6" to 12" 35 $ WR-DRES20 Dresden Plate - 20 Point - 20 Point Adjustable Dresden Plate 6" to 12" 35 $ WR-DRES8 Dresden Plate - 8 Point - 8 Point Adjustable Dresden Plate 6" to 12" 35 $ WR-DRESDEN32 Dresden Plate - 32 Point - 32 Point Adjustable Dresden Plate 18" to 36" Block 35 $ WR-ITSET - ISOSCELES TRIANGLE Isosceles Triangles - Adjustable 2 Piece value Set 35 $ WA-DWR Exploring the Double Wedding Ring Book - Exploring the Double Wedding Ring has 38 Block and Quilt ideas based around the 4 Sets. There is a comprehensive Fabric Requirement Chart to make it easy to plan your next Westalee Double Wedding Ring project. 36 $ WR-ADJSBRAIDER Adjustable Braider - Braids up to 12" wide, with or without cornerstones 36 $ WR-DWRS SET1 Double Wedding Ring Set 1 - with DVD and instructions. 36 $ WR-DWRS SET2 Double Wedding Ring Set 2 36 $ WR-DWRS SET3 Double Wedding Ring Set 3 36 $ WR-DWRS SET4 Double Wedding Ring Set 4 36 $ Epsilon Star Setter - 8 pointed stars in sizes from 2" to 18" with split, harlequin or striped WR-EpsilonStarSetter diamonds. 37 $ WR-ILLUS2-6 - ILLUSIONS Illusions 2" - 6" - Illusions, Adjustable tools to make blocks from 2" - 6" 37 $ WR-ILLUS ILLUSIONS Illusions 6" - 12" - Illusions, Adjustable tools to make blocks from 6" to 12". 37 $ Kali Star Quilt Variations - The book - This is a design ideas book, a selection of some of the WA-KALIBOOK quilts that can be made using the Kali Star templates. 38 $ WR-ADJHALFHEX Adjustable Half-Hexagon 38 $ WR-KALISET Kali Star Quilt Variations-9 Piece Set 38 $ WR-BHSQS1-6 Braider Half Sq & Qtr Sq Triangles 39 $ WR-BRAIDEREASYQTR Braider Easy Quarter Square Triangle 39 $ WR-BRAIDSQ - BRAIDER RULER Braider Ruler - Designed to cut Braids and Squares set on point 39 $ WT-COQSPW11-1/2" - Spin Wheels WT-COQSPW5-1/2" - Spin Wheels [Low Shank, High Shank, or Long Arm] ( )-Circles On Quilts - Spinning Wheels Template (11-1/2")..CHOOSE NO. 1,2,3,4,5,6,7,8,9,15,16,18,19,20,23,25,27,28,29,30,31,32,33,34, $ [Low Shank, High Shank, or Long Arm] ( )-Circles on Quilts - Spinning Wheels Template (5-1/2")..CHOOSE NO. 10,11,13, 14,17, 22,24, $ WT-COQSPW7-1/2" - Spin [Low Shank, High Shank, or Long Arm] ( )-Circles on Quilts - Spinning Wheels Template (7-1/2) Wheels No: 12, 20, 21, $ [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Template 11-1/2" CHOOSE:.. NO. 1, 2, 3, WT-SFX-L11-1/2" - Spin-e-fex 4, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15, 16, 17, $ [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Template 5-1/2" CHOOSE:.. NO. 1, 2, 3, 4, WT-SFX-M 5-1/2" - Spin-e-fex 5, 6, 7, 8, 9, 10, 11, $ Page of 9

9 WT-SFX-S 3-1/2" - Spin-e-fex WT-COQW11-1/2" - Wreath [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Template 3-1/2" CHOOSE:.. NO. 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, $ [Low Shank, High Shank, or Long Arm] ( )-Circles on Quilts - Wreath Template (11-1/2")..CHOOSE:..NO. 1, 2, 3, 4, 6, 7, 8, 12, 15, 16, 20, 22, $ WT-COQW4-1/2" - Wreath [Low Shank, High Shank, or Long Arm] ( )-Circles On Quilts - Wreath Template (4-1/2")..NO $ WT-COQW5-1/2" - Wreath [Low Shank, High Shank, or Long Arm] ( )-Circles on Quilts - Wreath Template (5-1/2")..CHOOSE: NO. 5, 17, 18, 19, $ WT-COQW7-1/2" - Wreath [Low Shank, High Shank, or Long Arm] ( )-Circles on Quilts - Wreath Template (7-1/2")..CHOOSE: NO. 9, 10, 11, $ WA-BRAIDEDHORIZ PATTERN "Braided Horizons" The Pattern - The Quilt measure 61" x 58 1/4". $ WT-SFX-SCQSET1 - Curly Q [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template Set 1 (Set of 6: Set 1 1.5",3.5",5.5",7.5",9.5",11.5" 22 $ WT-SFX-SCQSET2 - Curly Q Set 2 WT-WCR 1.5E-Continuous [Low Shank, High Shank, or Long Arm] ( )-Spin-e-fex Curly Q Template Set 2 (Set of 6: 2.5",4.5",6.5",8.5",10.5",11.5")...+ add bonus.5" Between the Lines Template - promo deal ends 3/31/16 22 $ [Low Shank, High Shank, or Long Arm] ( )-Continuous and Echo Template 1.5E - [Low Shank, High Shank, or Long Arm] ( )-..1 1/2" high by 1 1/2" wide. Optional echo built into template $ Page 9 of 9