Spare parts catalog. Check sieve MKSA-40 / -75. Bühler AG CH-9240 Uzwil, Switzerland Phone Fax
|
|
- Shauna McDaniel
- 5 years ago
- Views:
Transcription
1 Bühler AG CH-9240 Uzwil, Switzerland Phone Fax Spare parts catalog Check sieve MKSA-40 / -75 MKSA en-0511
2 2 After-sales service Check sieve After-sales service Ordering spare parts When ordering spare parts, please refer to the information on the following pages. Please note that special manufacturing and delivery specifications are frequently applied to Bühler and non-bühler parts, and that the spare parts supplied by Bühler always conform to the latest state of technology. Ordering instructions An order for spare parts must include the following information: Machine No. Subassembly No. Part No. Designation Quantity Note: These order details are required to prevent incorrect deliveries. If a part being ordered cannot be distinguished clearly, please include a dimensional sketch and a description. When ordering spare parts that do not have part numbers, be sure to include the subassembly no. and, in place of the part no., the parts list item number. Motors and drives: Please include the motor or drive number when enquiring about or ordering spare parts. Contact Bühler AG Ersatzteildienst Grain Processing CH-9240 Uzwil, Switzerland Fax Bühler AG Ersatzteildienst Engineered Products CH-9240 Uzwil, Switzerland Fax MKSA en-0511 Copyright 2006 Bühler AG
3 Check sieve After-sales service 3 Spare parts designation Designation E1 E2 E3 V Description Critical spare parts Parts that can cause the entire machine to fail if they fail or become defective. Onsite stock required. Moderately critical spare parts Parts that can greatly limit the functionality of the machine if they fail or become defective. Onsite stock required. Non-critical spare parts Parts that only slightly limit the functionality of the machine if they fail or become defective. Defined delivery date. Wear part Onsite stock required.
4 4 After-sales service Check sieve MKSA en-0511 Copyright 2006 Bühler AG
5 Check sieve 5 Table of contents Spare parts lists... 7 MKSA-40 MKSA Control screen 40 with drive stainless... 9 MKSA Control screen 40 with drive MKSA Selection list: Sieve support with clothing MKSA Selection list: Sieve support with clothing MKSA Selection list: Nylon clothing for MKSA MKSA Selection list: Wire cover for MKSA MKSA-75 MKSA Control screen 75 with drive stainless MKSA Control screen 75 with drive MKSA Selection list: Sieve support with clothing MKSA Selection list: Nylon clothing for MKSA MKSA Selection list: Wire cover for MKSA MKSA-40 / -75 MKSA Selection list: Vibrator 0,12 kw to MKSA... 23
6 6 Check sieve MKSA en-0511 Copyright 2006 Bühler AG
7 Check sieve 7 Spare parts lists
8 Check sieve 8
9 Check sieve 9 MKSA MKSA-40 Control screen 40 with drive stainless Item Part No. C Designation Qty. Unit 01 MKSA E3 Housing stainless 1 ST 02 MKSA Selection list: Sieve support with clothing 1 ST 03 MKSA E3 Suspension assembly 3 ST 04 MKSA E3 Textile sleeve D ST 05 MKSA E3 Seal NR 660mm 1 ST 06 MKSA E3 Clamp band 1350mm 4 ST 07 UNN E3 Lock to clamp band 4 ST 08 UNE E3 Earthing strap 16mm2 L = 250mm 1 ST 09 MKSA Selection list: Vibrator 0,12kW 1 ST
10 Check sieve 10
11 Check sieve 11 MKSA Control screen 40 with drive Item Part No. C Designation Qty. Unit 01 MKSA E3 Housing powder-coated 1 ST 02 MKSA Selection list: Sieve support with clothing 1 ST 03 MKSA E3 Suspension assembly 3 ST 04 MKSA E3 Textile sleeve D ST 05 MKSA E3 Seal NR 660mm 1 ST 06 MKSA E3 Clamp band 1350mm 4 ST 07 UNN E3 Lock to clamp band 4 ST 08 UNE E3 Earthing strap 16mm2 L = 250mm 1 ST 09 MKSA Selection list: Vibrator 0,12kW 1 ST
12 Check sieve 12
13 Check sieve 13 MKSA Selection list: Sieve support with clothing Item Part No. C Designation Qty. Unit 01 MKSA E3 Sieve Clothing PE stainless 1 ST 02 MKSA E3 Sieve with wire cloth Clothing stainless 1 ST 03 MKSA E3 Sieve support stainless with perforated sheet 20/20 1 ST MKSA Selection list: Sieve support with clothing Item Part No. C Designation Qty. Unit 01 MKSA E3 Sieve Clothing PE stainless 1 ST 02 MKSA E3 Sieve with wire cloth Clothing stainless 1 ST 03 MKSA E3 Sieve support stainless with perforated sheet 20/20 1 ST
14 Check sieve 14 MKSA Selection list: Nylon clothing for MKSA-40 Item Part No. C Designation Qty. Unit 01 MKSA V Polyester fabric w = 1,6 490x490 1 ST 02 MKSA V Polyester fabric w = 2,0 490x490 1 ST 03 MKSA V Polyester fabric w = 2,38 490x490 1 ST 04 MKSA V Polyester fabric w = 3,0 490x490 1 ST 05 MKSA V Polyester fabric w = 4,0 490x490 1 ST 06 MKSA V Polyester fabric w = 5,0 490x490 1 ST
15 Check sieve 15 MKSA Selection list: Wire cover for MKSA-40 Item Part No. C Designation Qty. Unit 01 MKSA V Wire cloth w = 0,75 D 0,28 490x490 stainless 1 ST 02 MKSA V Wire cloth w = 1,0 490x490 stainless 1 ST 03 MKSA V Wire cloth w = 1,6 490x490 stainless 1 ST 04 MKSA V Wire cloth w = 2,0 490x490 stainless 1 ST 05 MKSA V Wire cloth w = 2,5 490x490 stainless 1 ST 06 MKSA V Wire cloth w = 3,55 490x490 stainless 1 ST 07 MKSA V Wire cloth w = 4,0 490x490 stainless 1 ST 08 MKSA V Wire cloth w = 5,0 490x490 stainless 1 ST 09 MKSA V Wire cloth w = 6,30 490x490 stainless 1 ST 10 MKSA V Wire cloth w = 7,10 490x490 stainless 1 ST 11 MKSA V Wire cloth w = 8,0 D 1,6 490x490 stainless 1 ST 12 MKSA V Waved grid Mesh size 10 D 1,5 stainless 1 ST 13 MKSA V Waved grid Mesh size 20 D 2 stainless 1 ST
16 Check sieve 16
17 Check sieve 17 MKSA MKSA-75 Control screen 75 with drive stainless Item Part No. C Designation Qty. Unit 01 MKSA E3 Housing stainless 1 ST 02 MKSA Selection list: Sieve support with clothing 1 ST 03 MKSA E3 Suspension assembly 3 ST 04 MKSA E3 Textile sleeve D ST 05 MKSA E3 Seal 1360mm CR 1 ST 06 MKSA E3 Clamp band 2450mm 4 ST 07 UNN E3 Lock to clamp band 4 ST 08 UNE E3 Earthing strap 16mm2 L = 250mm 1 ST 09 MKSA Selection list: Vibrator 0,12kW 1 ST
18 Check sieve 18
19 Check sieve 19 MKSA Control screen 75 with drive Item Part No. C Designation Qty. Unit 01 MKSA E3 Housing powder-coated 1 ST 02 MKSA Selection list: Sieve support with clothing 1 ST 03 MKSA E3 Suspension assembly 3 ST 04 MKSA E3 Textile sleeve D ST 05 MKSA E3 Seal 1360mm CR 1 ST 06 MKSA E3 Clamp band 2450mm 4 ST 07 UNN E3 Lock to clamp band 4 ST 08 UNE E3 Earthing strap 16mm2 L = 250mm 1 ST 09 MKSA Selection list: Vibrator 0,12kW 1 ST
20 Check sieve 20
21 Check sieve 21 MKSA Selection list: Sieve support with clothing Item Part No. C Designation Qty. Unit 01 MKSA E3 Sieve Clothing PE 1 ST 02 MKSA E3 Sieve with wire cloth Clothing stainless 1 ST 03 MKSA E3 Sieve support 75 stainless with perforated sheet 20x20 1 ST
22 Check sieve 22 MKSA Selection list: Nylon clothing for MKSA-75 Item Part No. C Designation Qty. Unit 01 MKSA V Polyester fabric w = 1,6 840x840 1 ST 02 MKSA V Polyester fabric w = 2,0 840x840 1 ST 03 MKSA V Polyester fabric w = 2,38 840x840 1 ST 04 MKSA V Polyester fabric w = 3,0 840x840 1 ST 05 MKSA V Polyester fabric w = 4,0 840x840 1 ST 06 MKSA V Polyester fabric w = 5,0 840x840 1 ST MKSA Selection list: Wire cover for MKSA-75 Item Part No. C Designation Qty. Unit 01 MKSA V Wire cloth w = 7,1 840x840 stainless 1 ST 02 MKSA V Wire cloth w = 6,3 840x840 stainless 1 ST 03 MKSA V Wire cloth w = 1,6 840x840 stainless 1 ST 04 MKSA V Wire cloth w = 2,0 840x840 stainless 1 ST 05 MKSA V Wire cloth w = 2,5 840x840 stainless 1 ST 06 MKSA V Wire cloth w = 3,15 840x840 stainless 1 ST 07 MKSA V Wire cloth w = 3,55 840x840 stainless 1 ST 08 MKSA V Wire cloth w = 4,0 840x840 stainless 1 ST 09 MKSA V Wire cloth w = 5,0 840x840 stainless 1 ST 10 MKSA V Waved grid Mesh size 10 1,5 stainless 1 ST 11 MKSA V Waved grid Mesh size 15 stainless 1 ST
23 Check sieve 23 MKSA MKSA-40 / -75 Selection list: Vibrator 0,12 kw to MKSA Item Part No. C Designation Qty. Unit 01 UXM E3 Vibrator VLD ,12kW 1 ST 02 UXM E3 Vibrator VLD ,12kW 1 ST
24 Check sieve 24
Phone: Fax: Large Inventory Quick Delivery Knowledgeable Staff Competitive Pricing
Pole Bracket Mounting Hardware Seasonal Decorations Banner Flag Municipal Car Dealers Traffic Signal Shopping Centers Gas Stations Security Cameras Clamp/Straps Stainless Steel Snap Locking Style Clamps/Straps
More information7. Operating instructions: EFL 300
7. Operating instructions: EFL 300 Copyright 2015 by Endecotts Ltd. 59 1. Setting up Technical specifications SIEVE SHAKER MODEL: EFL 300 General Information The new EFL 300 combines the best features
More informationCOFFEE LABORATORY WHITE STONE VA TEL
1. Technical specifications 4. Operating instructions: Octagon 200 Copyright 2015 by Endecotts Ltd. 21 1. Setting up Technical specifications SIEVE SHAKER MODEL: Octagon 200 General Information The sieve
More informationSaatiMil TM PRECISION FABRICS FOR MILLING & SIFTING APPLICATIONS
SaatiMil TM PRECISION FABRICS FOR MILLING & SIFTING APPLICATIONS Perfecting the Art of Precision Screening fabrics High-tech precision looms SaatiTech is a member of the worldwide Saati Group of companies,
More informationModel 511 Model 711 Model 821
Stainless Steel Tru-Balance Model 511 Model 711 Model 821 Shown with front lift off shield removed The ultimate in reliable performance, capacity, versatility and sanitation for your sifting or screening
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 3310-1 Fifth edition 2016-08-15 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth Tamis de contrôle Exigences techniques et vérifications
More informationTest sieves Technical requirements and testing. Part 2: Test sieves of perforated metal plate
INTERNATIONAL STANDARD ISO 3310-2 Fifth edition 2013-09-01 Test sieves Technical requirements and testing Part 2: Test sieves of perforated metal plate Tamis de contrôle Exigences techniques et vérifications
More informationSignal Beacon - LED Series 6162
www.stahl.de > Versions rotating mirror beacon rotating beacon beacon with double flash (9 + 5 J) flashing beacon (15 J) LED-continuous beacon LED-rotating beacon > Seawater resistant aluminium enclosure
More informationOPERATION MANUAL ELECTRONIC FREQUENCY CONVERTER HFO E
OPERATION MANUAL ELECTRONIC FREQUENCY CONVERTER HFO E Lievers Holland Postbus 103 3640 AC Mijdrecht Tel: +31 (0)297 231900 Fax: +31 (0)297 231909 E mail: info@lieversholland.nl www.lieversholland.nl Operation
More informationCrimping Die Assemblies , , , , , , , , and 69653
Crimping Die Assemblies 46754-2, 46755-2, 46756-2, 46757-2, 46758-2, 46759-2, 46760-2, 59870-1, and 69653 Instruction Sheet 408-1602 10 NOV 16 Rev C 1. INTRODUCTION WIRE SIZE (MCM) (1) CMA (Circular Mil
More information2013 Moving Pad & Accessories Catalogue
2013 Moving Pad & Accessories Catalogue Western Tarpaulin & Co. Industrial Textile Products and More...Since 1948 Serving the moving industry for over 50 years 1-800-265-9507 High Quality Regular Van Pad
More informationScheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification
BRITISH STANDARD BS 8666:2005 Incorporating Amendment No. 1 Scheduling, dimensioning, bending and cutting of steel reinforcement for concrete Specification ICS 77.140.15; 91:080.40 Committees responsible
More informationSIEVE STRETCHING AND FRAME PREPARATION Saati Stretching APRIL 2017
SIEVE STRETCHING AND FRAME PREPARATION Saati Stretching - 101 APRIL 2017 Profile SAATI S.p.A Year of foundation: 1935 Headquarter: Appiano Gentile (CO), Italy Business Start: Products for food production
More informationProfessional Series Modular Kennels
Professional Series Modular Kennels Heartland English Setters Fairmount, IL 61841 217-733-2644 www.heartlandenglishsetters.com Why TK Pro-Series? After years of using major branded and custom-built kennels,
More informationOPERATION MANUAL ELECTRONIC FREQUENCY CONVERTER HFO-E
OPERATION MANUAL ELECTRONIC FREQUENCY CONVERTER HFO-E Lievers Holland PO Box 103 3640 AC Mijdrecht Tel: +31 (0)297-231900 Fax: +31 (0)297-231909 E-mail: info@lieversholland.nl - www.lieversholland.nl CONTENT
More informationEMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL
EMMEGI ARCHITECTURAL FENCING MASTER SPECIFICATION SECTION 05720 METAL FENCING, GATES & RAILING SYSTEM PART 1 GENERAL EMMEGI ARCHITECTURAL FENCING is a high quality steel fencing system comprised of a hybrid
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Brush Guard Kit Kit no. 67730 (black), 67731 (stainless) for GMC Trucks Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
More informationISO INTERNATIONAL STANDARD. Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3310-1 Fourth edition 2000-07-15 Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth Tamis de contrôle Exigences
More informationLAARMANN. Sieving Machines and Test Sieves. Innovators in Solids
Innovators in Solids Sieving Machines and Test Sieves Digital Sieving Machines for dry, wet and air jet sieving Stainless steel test sieves with precision wire mesh, perforated plates and electroformed
More informationFramo 80. Siconnect Framo 80 Beam Section TP F 80 Group: A410
Framo 80 15Framo 80 Beam Section TP F 80 Group: A410 Galvanised hollow-box-section for fabrication of steel frames. Designed for both simple two-dimensional supports and complex volumetric arrangements.
More informationTECTUS. The completely concealed hinge system
TECTUS The completely concealed hinge system It s still design even if there s nothing to be seen! TECTUS This Latin word for concealed signifies SIMONSWERK s newly developed, completely hidden hinge system.
More informationGROUNDING EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA EA
PAGE 86 5000 500 5040 5060 5080 500 50 540 560 580 500 540 560 580 5300 5340 5360 5380 5400 5440 5460 5480 5500 5540 5560 700 705 75 70 75 730 740 745 750 755 765 770 775 780 790 7300 7305 730 C 00 C 0
More informationSuper Screen (Large)
Super Screen (Large) INSTALLATION & MAINTENANCE MANUAL BM&M Screening Solutions 5465 Production Blvd. Surrey, BC Canada V3S 8P6 Toll-free: 1-800-663-0323 Phone: 604-539-1029 Fax: 604-539-1022 sales@bmandm.com
More informationMM22 Enclosure Mount C228M-B (4/14)
I N S T A L L A T I O N MM22 Enclosure Mount C228M-B (4/14) Important Safety Instructions 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.
More informationSAFETY. Read and understand all safety precautions and instructions before installing this product.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationAbrasives 31. Abrasives. ACCESSORIES Rubber Slotted Expander Wheels Slotted wheels for use with evenrun bands.
215587 Pages 30-39 7/21/03 2:57 PM Page 30 3M Evenrun Bands Aluminum oxide bands are made of high-grade mineral and a bonding system which reduces shelling of the mineral. Economical abrasive bands for
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 76139 & 7643 For Chevrolet Silverado 1500 As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message has a
More informationSTAIRCASES, BALUSTRADING, BALCONIES & CANOPIES
STAIRCASES, BALUSTRADING, BALCONIES & CANOPIES Introduction With 40 years experience, M&G Olympic Products has maintained its position as a leading specialist in the design, manufacture and installation
More informationINDUSTRIAL DIRECT DRIVE 16 Electric Heated Air Curtain Data Sheet
For Door Heights To 16 (environmental separation) INDUSTRIAL DIRECT DRIVE 16 Data Sheet STANDARD CONSTRUCTION Single speed T.E.A.O. motor(s) - direct drive Gray powder coated exterior (Optional: Custom
More informationKnife grinding machine K3 H/K
Knife grinding machine K3 H/K 01.11.2010 GS-Schleiftechnik, Leyher Str. 61 a, D-90431 Nürnberg Phone 0049/9193/4404, Fax 0049/9193/4391 e-mail: info@gs-de.eu 1 Table of Contents A. SAFETY... 3 A.1 THE
More informationAll Purpose Hardware
Backs and Support OWNER MANUAL All Purpose Hardware TFB Hardware All Purpose (Knob) Owner s Manual Customer Satisfaction 1.0 Stealth Products strives for 100% customer satisfaction. Your complete satisfaction
More informationBONDED ABRASIVE PRIMER
BONDED ABRASIVE PRIMER Basic information on the terminology and use of bonded abrasive products. Property of: KASCO ABRASIVES Coldwater, Michigan 1-800-367-729 Fax 517-279-7265 1 GENERAL BONDED ABRASIVES
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 7646 & 766 For GMC Sierra 500 As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message has a specific purpose.
More informationMISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION
5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE
More informationBühler Dies and Roller Shells High-precision Parts for all Types of Pellet Mills.
Bühler Dies and Roller Shells High-precision Parts for all Types of Pellet Mills. Bühler dies and roller shells. Increasing lifetime and profits. Bühler specializes in the manufacture of high-precision
More informationUNHCR Case postale 2500 CH-1211 Genève 2. Tel.:
UNHCR Case postale 2500 CH-1211 Genève 2 Tel.: +41 22 739 8220 This ANNEX A contains specifications for the visibility items required: Specifications A: Baseball Caps Specifications B: UN and UNHCR Flags
More informationLUMINATOR. A Mark IV Industries Company. ILLUSTRATED PARTS CATALOG FOR 8 x 96 HORIZON SIDE DESTINATION SIGN. Part Number
LUMINATOR A Mark IV Industries Company ILLUSTRATED PARTS CATALOG FOR 8 x 96 HORIZON SIDE DESTINATION SIGN Part Number 099003 SPARE PARTS CATALOG GENERAL This parts catalog provides replacement parts information
More informationHAVER & BOECKER. Information. Woven Wire Cloth Terminology, Types of Weave and Apertures
HAVER & BOECKER Information Woven Wire Cloth Terminology, Types of Weave and Apertures Wire Cloth Terminology according to ISO 9044 Aperture width w is the distance between two adjacent warp or weft wires,
More informationEC centrifugal fan. forward curved, dual inlet with housing (flange)
D3G46-AH- ebm-papst Mulfingen GmbH & Co. KG Bachmühle 2 D-74673 Mulfingen Phone +49 7938 8- Fax +49 7938 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court
More informationWanco Electric & Machinery Pte Ltd. Cable Management Systems. Cable Trunking
Wanco Electric & Machinery Pte Ltd Cable Management Systems Cable Trunking About Wanco Wanco Electric and Machinery Pte Ltd is the leader in electrical construction materials. Through continued support
More informationPRODUCT CATALOG CHINA. Plastic Recycling Solutions MADE IN
PRODUCT CATALOG MADE IN CHINA Plastic Recycling Solutions COMPANY PROFILE POKS Machinery is one of the leading machine manufacturers for plastic recycling in China. Our highly satisfied customers are spread
More informationCenomic. Flexible full-volume bead mill. Innovations for a better world.
Cenomic. Flexible full-volume bead mill. Innovations for a better world. Cenomic TM. Flexible full-volume bead mill. Full-volume agitated bead mill. For an unbeatable price-performance ratio. Leading companies
More informationOperating manual. TruTool N 500 (1A1) english
Operating manual TruTool N 500 (1A1) english Table of Contents 1. Safety...4 1.1 General safety information...4 1.2 Specific safety information...5 2. Description...6 2.1 Correct use...7 2.2 Technical
More informationLamellar Grinding Machines T-20/T-25 11/2012
Lamellar Grinding Machines T-20/T-25 11/2012 Instruction Manual GS-Schleiftechnik Leyher Str. 61a D- 90431 Nürnberg Tel.0700-24681234- e-mail: info@gs-de.eu - Internet: www.gs-de.de 1 Contents as of 12/01/12
More informationCutting Off Saw. Model:TV-350. Operation Manual
Cutting Off Saw Model:TV-350 Operation Manual 1 Table of content 1. Introduction..3 1.1 General...3 1.2 Safety regulations.3 1.3 Guarantee.. 4 2. Technical data.. 4 2.1 Main groups...4 2.2 Survey and sketch
More informationYour source for screens.
Your source for screens. 800-257-5241 sales@compasswire.com www.compasswire.com Comprehensive inventory always in stock. Fast order turnaround. And our ongoing commitment to minimizing downtime and saving
More informationCheck-list for Hazardous material workstations
Check-list for Hazardous material workstations Company/Address: asecos GmbH Weiherfeldsiedlung 16-18 D-63584 Gründau Fax: +49 6051 9220-10 Order information: Company: Department: Name: Telephone: E-Mail:
More informationUNPACKING. Thank you for purchasing the Manual Capsule Filling Machine from KARISHMA PHARMA MACHINES.
UNPACKING Thank you for purchasing the Manual Capsule Filling Machine from KARISHMA PHARMA MACHINES. Please take sufficient time and read this manual carefully before you start installation and operation
More informationCLICK ON STYLE TO NAVIGATE TO PAGE. Contents
CLICK ON STYLE TO NAVIGATE TO PAGE Contents Ladies Uniform Ladies S/Sleeve Polo 2 Ladies ¾ Sleeve Shirt 2 Ladies Soft Shell Jacket 3 Ladies Soft Shell Vest 3 Ladies Knitted Cardigan 4 Ladies Knitted Jumper
More informationTested and ready to use Quality from a single-source
Tested and ready to use Quality from a single-source 2 Cable fabrication 100% tested and ready to use for all-round certainty Quickly assembled and reliable in operation that is how machine components
More informationCorrect Digitizing for Best Results When Creating Badges on Madeira s MFS
Correct Digitizing for Best Results When Creating Badges on Madeira s MFS 1. Set the first jump stitch to the corner of reference. Continue with another jump stitch to the start of the design. 2. Digitize
More information3 Scotchmate TM. Polyester Reclosable Fasteners. Product Selection Guide April, M Scotchmate Polyester Reclosable Fastener.
3 Product Selection Guide April, 2003 Products 3M Scotchmate Polyester Reclosable Fastener Plainbacked Products Loop Hook SJ3477 SJ3476 SJ3487FR SJ3486FR Pressure Sensitive Adhesive Products Loop Hook
More informationKnitted Wire Mesh. Overview
Overview A range of knitted wire mesh gaskets, providing a cost-effective solution to high shielding performance applications in the magnetic and electrical fields RFI/EMI and including EMP. Manufactured
More informationFORTIS RANGE. Modular concrete & timber seating. Combinations + configurations. tel:
Modular concrete & timber seating Fortis is a new seating product designed to offer an adaptable range of configuration options from a limited number of standard components. The concrete plinth is the
More informationSolid biofuels Determination of particle size distribution for uncompressed fuels. Part 2:
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 17827-2 First edition 2016-05-15 Solid biofuels Determination of particle size distribution for uncompressed fuels Part 2: Vibrating screen method
More informationEURO CRATES EURO CRATE + FRONT ARCH (FLOOR MOUNT) (84 SIDES + EURO SWING BACK GATE)
EURO CRATES CRATES-9 206352 84 EURO CRATE + FRONT ARCH (FLOOR MOUNT) (84 SIDES + SIDE MOUNT BUMPER) 206352-90 90 EURO CRATE + FRONT ARCH (FLOOR MOUNT) (84 SIDES + EURO SWING BACK GATE) 206350 84 EURO CRATE
More informationDisc, Belt, and Combination Disc/Belt Sanders
This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc
More informationC.R. LAURENCE CO. INC Installation Instructions
IMPORTANT: PLEASE READ BEFORE INSTALLING THE WINDOW The following instructions will reduce your chances of experiencing problems during installation, and ensure smooth, trouble-free operation of these
More informationQuick Release Hardware
Backs and Support OWNER MANUAL Quick Release Hardware TFB Hardware Quick Release Owner s Manual Customer Satisfaction 1.0 Stealth Products strives for 100% customer satisfaction. Your complete satisfaction
More informationPET & Steel Strapping Tools
PET & Steel Strapping Tools Handheld / Pneumatic / Battery-Operated Type AQD-19 Pneumatic strapping tools Suitable for PET straps with width of 13~19mm and thickness of 0.5~1.5mm. Maximum tighten power:
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 105-D02 Fifth edition 2016-06-01 Textiles Tests for colour fastness Part D02: Colour fastness to rubbing: Organic solvents Textiles Essais de solidité des coloris Partie D02:
More informationRottweiler Club of NSW Merchandise
The Rottweiler Club of NSW has the following Merchandise clothing for sale Being a small Club, we take pre-orders but we do have a small selection of sizes on hand and some will be available at the next
More informationE TREMEFLAP FLAP WHEELS
E TREMEFLAP REFERENCE & APPLICATION GUIDE Flap Wheels EASY WAYS TO PLACE AN ORDER Phone: 905 282 1313 Fax: 905 282 1313 e-mail: sales@extremeabrasivesl.com Over the Web: (coming soon) EXTREME ABRASIVES
More informationInstallation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
More informationACHIEVER AC
ACHIEVER AC100 www.outcomeseating.com - 855.967.4400 ACHIEVER AC100 key features -Height adjustable mesh back and upholstered seat -Synchronous mechanism -Seat depth adjustment by 3.9 inches -Lumbar support
More informationScrew jack options. When stainless steel screws are specified, we can supply the flange end and rod end in stainless if requested.
Screw jack options Raised cover CA Available for MA Series screw jacks, the raised covers with toleranced dimensions act as a centring register, also allow the fitting of bronze guide bushes, protective
More informationTop spin Nr /
Top spin Nr. 1840 0000 / 1840 1000 Bedienungsanleitung 21-6680 28052014 / A Made in Germany Ideas for dental technology Top spin Nr. 1840 0000 / 1840 1000 Contents 1. Introduction...2 1.1 Symbols...2 2.
More informationWEAVING SOLUTIONS WeftMaster CUT-iT
WEAVING SOLUTIONS WeftMaster CUT-iT INCREASES QUALITY AND REDUCES LOT-CHANGE TIMES + FABRIC CUTTING WeftMaster CUT-iT is the ideal fabric cutter system for thermal cutting from thin and light to dense
More informationTOGGLE SWITCHES IP67 A 9 SERIES 1B AGENCY APPROVALS SPECIFICATIONS
AGENCY APPROVALS SPECIFICATIONS Sealed miniature toggle switches C IP67 File N E195524 File N E195524 In conformity with: EN 60529: 1991 IEC 529: 1989 CHARACTERISTICS Contact Rating: S (silver) - 5A with
More informationSeries 6000 Vinyl Single Hung
Series 6000 Horizontal Slider Series 6000 Vinyl Single Hung Contents List of Architectural Drawings...6000SH - 3 Elevations - Single Hung...6000SH - 4 Available Sizes - Single Hung...6000SH - 5 Series
More information1000 Watt Metal Halide Light - Hot Restrike - Multi-tap Ballast - Spot or Flood
1000 Watt Metal Halide Light - Hot Restrike - Multi-tap Ballast - Spot or Flood Part #: HID-22SL-HR The HID-22SL-HR 1000 Watt Metal Halide Light from Larson Electronics provides operators with the intensity
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More informationISO INTERNATIONAL STANDARD. Textiles Water resistance Rain tests: exposure to a horizontal water spray
INTERNATIONAL STANDARD ISO 22958 First edition 2005-03-15 Textiles Water resistance Rain tests: exposure to a horizontal water spray Textiles Résistance à l'eau Essai d'arrosage: exposition à une pulvérisation
More informationControl stations and enclosures Pendant control stations, for control circuits Double insulated or metal, types XAC-B and XAC-M
Characteristics Pendant control stations, for control circuits Environment Conforming to standards IEC 947-5-1, EN 60947-5-1 XAC-B : standard version : NEMKO, CSA 300 V type 4 Approvals XAC-M : standard
More informationMechanical Actuators
Mechanical Actuators Translating Ball Screw Actuators 1/2-Ton through 50-Ton Capacity Installation, Operation & Maintenance Instructions Publication Part No. SK-2373 CAUTION This manual contains important
More informationTerraLink. Twisted Wire Mesh Gabions & Mattresses Welded Wire Mesh Gabions. Data Sheet s Index. TerraLink Products
Twisted Wire Mesh Gabions & Mattresses Welded Wire Mesh Gabions Data Sheet s Index Page No. Products 2 Twisted Mesh Gabions & Mattresses Specification 3 Twisted Mesh Gabion & Mattress Assembly / Construction
More informationThe Hoodie. You can read more about this pattern over at So Sew Easy HERE.
The Hoodie This is the easiest hoodie pattern and tutorial I could come up with. I have tried my best to simplify the method, but still, I believe it is for the intermediate to the advanced seamstress.
More informationAMERICAN WHITE OAK CARE AND MAINTENANCE
AMERICAN WHITE OAK A classic material in American design. We elevate the most underutilized parts of the tree, focusing on character, durability and beauty. Our American White Oak is locally-sourced using
More informationWORK SURFACE I highly recommend getting an Olfa knife. It is difficult to cut 1/2 foamcore with just an Exacto. RAZOR KNIFE CUTTING MAT WIRE CUTTERS
RAZOR KNIFE CUTTING MAT WIRE CUTTERS MARKING TOOLS PLIERS CIRCLE STENCIL SMALL WOOD SAW COMPASS 12 METAL RULER* > 16 RULER HOT GLUE GUN RIGHT TRIANGLE SCREWDRIVER Find a sturdy table that is in a well-lit
More informationZiptrak. Overview. Ziptrak system considerations. Ziptrak Vertical screening ideal for outdoor restaurants, patios, verandas, corporate signage.
Overview Vertical screening ideal for outdoor restaurants, patios, verandas, corporate signage. Operating big window and pergola blinds has been a difficult task for many people. Conventional spring loaded
More informationArtikel-Nr.:
CXMT 135; EX; UK Grinding and Engraving Tool Artikel-Nr.: 4419179 Ident-Nr.: 01018 Komponenten / Ersatzteile Position Artikel-Nr. Beschreibung 1 441917001006 nut 2 441917001008 fix pin 5 441917001011 screw
More informationInstallation, Operating and Maintenance Instructions. Translating Ball Screw Actuators. 1/2 ton through 50 Ton. Publication Part No. SK-2373.
Installation, Operating and Maintenance Instructions Translating Ball Screw Actuators 1/2 ton through 50 Ton Publication Part No. SK-2373 Caution This manual contains important information for the correct
More informationRead all instructions before using the log splitter, especially safety instructions.
Operation manual for log splitter ELH500, ELH700, ELH1100, TRH700 och TRH1100 Read all instructions before using the log splitter, especially safety instructions. Faxes Fabriks AB Hestravägen 7 330 26
More informationExcellence in in solid wood. joinery für Abbundanlagen.
Excellence in in solid wood OERTLI quality Qualität for für your Ihren success Erfolg High-performance Hochleistungs-Werkzeuge tools for joinery für Abbundanlagen. machines Faster Cheaper Cleaner The most
More informationStabalux T. 5.0 Stabalux T 1
5.0 1 5.1 - System 2 5.1.1 System properties 2 5.1.2 System profiles 6 5.2 - Processing information 9 5.2.1 Mullion-transom joint 9 5.3 - Design 11 5.3.1 System cross sections 11 5.3.2 Notes 13 System
More informationOsborn 3pc Bistro - Neutral
Please refer to part numbers when reordering For questions or comments about product: Email: service@nanshanint.com or Call toll-free: 1-877-998-1697 Made in / Hecho en CHINA Distributed by Sears, Roebuck
More informationM Tumvantar 09, innervantar Thumb mittens 09 M Trefingervantar 09, innervantar Three finger mittens DESCRIPTION...
1(15) M7330-107000-2 Tumvantar 09, innervantar Thumb mittens 09 M7330-106000-3 Trefingervantar 09, innervantar Three finger mittens 09 TABLE OF CONTENTS 1. DESCRIPTION... 2 2. APPLICABLE DOCUMENTS... 3
More informationREP Design LLC. 193 Winding Ridge Rd, Southington, CT INSTALLATION INSTRUCTIONS:
REP Design LLC 193 Winding Ridge Rd, Southington, CT 06489 1-860.426.1894 n7emw@cox.net www.repdesign.us INSTALLATION INSTRUCTIONS: SHD-SO239 Super Heavy Duty SO-239Antenna Mounting System Thank you for
More informationRAUTOOL ASSEMBLY TOOLS FOR REHAU EVERLOC TM COMPRESSION SLEEVES PARTS LIST /1
RAUTOOL ASSEMBLY TOOLS FOR REHAU EVERLOC TM COMPRESSION SLEEVES PARTS LIST 856300/1 Valid from April 2011 Subject to Technical Alterations www.rehau.co.uk Building Solutions Automotive Industry CONTENTS
More informationInstallation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays
Installation and Assembly: Articulating Swivel Arm for 37" - 60" Flat Panel Displays Models: PLA60, PLA60-S, PLAV60, PLAV60-S Max UL Load Capacity: 175 lb (79 kg) 2300 White Oak Circle Aurora, Il 60502
More informationASME BPE 2014 DT Range of Bioprocessing Fittings
SME PE 2014 DT Range of ioprocessing Fittings lchem Process Ltd offer the full range of SME PE ioprocessing Fittings in both SF1 and SF4 surface finishes. The standard provides a good manufacturing guide
More informationShutter Collection Conversational Set
Shutter Collection Conversational Set Style #: AC-392ANSET4 Lot Number: Date Purchased: THIS SET-UP GUIDE CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. DO NOT RETURN
More informationEMBLEMS AND TRANSFER PRESSES FOR EVERY USE
THERMOTEX EMBLEMS AND TRANSFER PRESSES FOR EVERY USE www.thermo-tex.de EMBLEMS EMBLEMS / TRANSFERS The logos are directly transferred onto the textile. It is usually produced as a transfer without background
More informationTUCANA-02 P PORTABLE END MILLING MACHINE USER S MANUAL
TUCANA-02 P PORTABLE END MILLING MACHINE USER S MANUAL 1 CONTENTS Page 1. General Information 3 1.1. Introduction 3 1.2. Manufacturer 3 2. Machine s Description and Purpose of Use 3 2.1. Machine s description
More informationFEB 18 Rev D
ORIGINAL INSTRUCTIONS Terminal and Splice Crimping Die Assemblies Instruction Sheet 408-1632 01 FEB 18 Rev D PROPER USE GUIDELINES Cumulative trauma disorders can result from the prolonged use of manually
More informationSpecifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent)
Specifications for Lathe L- 45/5000(for items from Sr. 01 to Sr. 22 in Indent) Annexure-1 Sr. Specification of Parameter Parameter Value 1.0 Capacity 1.1 Height of centers (nominal) (mm) 450 1.2 Type of
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationFolding Center XXL-Center
RAS Reinhardt Maschinenbau GmbH RAS : A revolution in folding long parts Does this sound familiar? Your bread and butter is in long parts, but bending them requires two, maybe three operators. The floor
More informationModel 204B-EM Elbow Mandrels Rev TABLE OF CONTENTS
92-0697 Rev. 970131 Model 204B-EM Elbow Mandrels TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 MAINTENANCE 7 OPERATION 8 TROUBLE SHOOTING 11 ACCESSORIES
More information