GeoTools commands summary
|
|
- Alexina King
- 5 years ago
- Views:
Transcription
1 GeoTools commands summary The following list of command descriptions show what each one of the GeoTools commands do. All commands shown here work in AutoCAD as well as Bricscad unless otherwise noted. Polyline Tools Tool # 1 Mass join polylines (2d & 3D) Tool # 2 Flexible ways to convert 2D to 3D and 3D to 2D polylines Tool # 3 Change width (multiple mode) Tool # 4 Single pick add and delete vertex Tool # 5 Identify & Reverse direction Tool # 6 Densify vertices Tool # 7 Distance and angle based vertex weed (optimization tool) Tool # 8 Weed (remove) collinear vertices from polyline Tool # 9 Identify and remove intersecting segments (kink / knot remover) Tool # 10 Populate zero value elevations by linear interpolation Tool # 11 Compute summed lengths Tool # 12 Control polyline linetype Tool # 13 Multiple Pedit Tool # 14 Identify zero elevation vertices in polylines Tool # 15 Place Points/Blocks along vertices Tool # 16 Merge adjacent closed polylines Tool # 17 Multiple polyline / line/ arcs vertex editor Tool # 18 Mark intersection points along lines,polylines,arcs.. Tool # 19 Mark junction points on a network of lines Tool # 20 Flip (mirror) arc segments in polylines Tool # 21 Specify segment lengths in polylines Tool # 22 Specify a new start point for closed polylines Tool # 23 Explode wide polylines, retain width geometry Tool # 24 Offset, Move, Extract, Mirror, Rotate, Stretch, Reshape part of polyline Tool # 25 Find direction of vertices Tool # 26 Compute and report detailed polyline statistics Tool # 27 Explode splined polylines Tool # 28 Express Pedit Tool # 29 Zoom to polyline Tool # 30 Highlight elevation differences Tool # 31 Add/Remove closing vertices Tool # 32 Fillet between two polylines / Fillet between multiple polylines Tool # 33 Fix objects with non-parallel UCS Tool # 34 Offset closed polylines INwards / OUTwards Tool # 35 Draw 2d/3d polylines with auto-edge panning
2 Tool # 36 Tool # 37 Draw linear polylines from arced polylines Compute summed polyline areas from selected layers Conversion Tools Tool # 38 Tool # 39 Tool # 40 Tool # 41 Tool # 42 Tool # 43 Tool # 44 Tool # 45 Tool # 46 Tool # 47 Tool # 48 Tool # 49 Tool # 50 Tool # 51 Tool # 52 Tool # 53 Tool # 54 Tool # 55 Tool # 56 Tool # 57 Tool # 58 Convert heavy-weight to light-weight polylines and vice-versa Convert zero-length lines to POINTs Scale Z values Convert arced Polylines to linear segment polyline Convert linear polylines to arcs/arced polylines Convert polylines to 3dface Convert polylines to PFACE mesh Change Properties ByLayer-to-ByEntity Convert Blocks/Shapes/Text/Circle to Points Convert Points/Text/Circles to Blocks/Shapes Convert Splines to polylines Convert polylines to SPLINE Inherit properties from neighboring objects Automatically Assign contour elevations Assign contour elevations from text objects 3DFaces to polylines 3DFaces to polyface mesh Polyface mesh to polylines Convert lines and arcs to polylines Flatten - Convert to 0.0 elevation Attributes to Xdata Export Tools Tool # 59 Tool # 60 Tool # 61 Tool # 62 Import/Export points and lines Import(read) / ARC ASCII DEM files Export (write) ARC ASCII DEM files Multiple drawing export in various formats Drawing Cleanup Tool # 63 Tool # 64 Tool # 65 Tool # 66 Tool # 67 Analyze and fix polyline elevation trends Remove overlapping segments from a lines selection Delete Duplicate Objects Delete Null TEXT Purge All Unused Symbols
3 Tool # 68 Tool # 69 Tool # 70 Tool # 71 Tool # 72 Tool # 73 Tool # 74 Tool # 75 Tool # 76 Tool # 77 Tool # 78 Linear & Node Snap (MAGNET) Identify intersecting segments (kinks) in polylines Break crossing objects at ends Lineworks Intersection Processor Detect free ends (dangles) of lines,polylines and arcs Remove all unreferenced scales Detaches all un-referenced XREFs and binds all others into current DWG Create right angle corners Weed points based on spacing Check for coincident (XY) endpoints with varying Z Set all 0 elevation vertices to a nearest value Draw Tools Tool # 79 Tool # 80 Tool # 81 Tool # 82 Tool # 83 Tool # 84 Tool # 85 Tool # 86 Tool # 87 Tool # 88 Tool # 89 Tool # 90 Tool # 91 Tool # 92 Tool # 93 Tool # 94 Tool # 95 Tool # 96 Tool # 97 Draw Tapered lines Draw Slot Draw Helix Draw Parabola Draw Involute Draw Tube Draw Tuncated Cone Draw Perpendicular lines Draw Rectangle with diagonals Projected(construction) lines Easy 3dpoint, 3dpolyline & 3dface Tangents to Curves Draw Embankment hatch slopes pattern Draw vegetation cover symbols Draw 3d polylines with auto.elev increment/decrement Draw a rectangle box at the current screen extents Draw bounding box around selected object(s) Draw a polyline by joining points in sorted order Draw arc-ends to arc-center connections in arcs & polyarcs Build Tool # 98 Tool # 99 Tool # 100 Tool # 101 Tool # 102 Tool # 103 Make Right-of-Way/Pavements/Ramps Draw Center-Lines from road R-O-W Multiple Offset Relative & Absolute Offset and delete original Offset 3d polylines Create centroid marks inside closed polygons
4 Tool # 104 Tool # 105 Tool # 106 Tool # 107 Tool # 108 Tool # 109 Tool # 110 Tool # 111 Tool # 112 Tool # 113 Tool # 114 Tool # 115 Tool # 116 Multi-Variable Measure Multiple Variable polyline segment offset Offset single segment from polyline Easy Solids Extruder Join nearest ends of lines, polylines Build common edges along closed, adjacent polygons Interpolate point elevation from neighboring polylines - manual pick Interpolate point elevation from neighboring polylines automatic Copy / Move and then Rotate Create closed polylines from a mass of networked polylines Create mathematical offsets between two contour polylines Place points along linear network Drape a 3D polyline across a set of intersecting linear objects Annotation Tool # 117 Tool # 118 Tool # 119 Tool # 120 Tool # 121 Tool # 122 Tool # 123 Tool # 124 Tool # 125 Tool # 126 Tool # 127 Label points Label polyline vertices Label polylines with attached data Label polyline segments Label contour polylines Label polyline Angles Annotate ends of lines/polylines with symbols Annotate points, based on layer names Create/update length annotation Display object handles as text labels Create annotations along intersections Blocks and Attributes Tool # 128 Tool # 129 Tool # 130 Tool # 131 Tool # 132 Tool # 133 Tool# 134 Tool # 135 Tool # 136 Tool # 137 Tool # 138 Tool # 139 Globally Modify Block Properties Extract Block attributes to file Export Block Attribute Tags to ASCII file Transfer Attributes between blocks Explode only nested blocks Global Attribute Editor Multiple choice attribute add/editor Multiple Redefine Blocks-Lyr/Clr Replace Block Explode Block- Retain attributes as Text Express Block Insert Repeat Last Block Insert
5 Tool # 140 Tool # 141 Tool # 142 Tool # 143 Tool # 144 Tool # 145 Tool # 146 Tool # 147 Tool # 148 Tool # 149 Tool # 150 Tool # 151 Tool # 152 Tool # 153 Search and replace text/attributes Edit blocks graphics and attribute properties independently Search Blocks for text strings Transfer Text strings to Block attributes Trim lines/polylines along intersecting blocks Rename block attribute tags, prompts and defaults Delete block attribute tags from block definition Compare Block attributes and create report Connect blocks based on attribute values Place a block along each segment of the polyline Move / Rotate attribute Make attribute readable Re-Order attributes of a block Explode blocks to a specified layer Text Tool # 154 Tool # 155 Tool # 156 Tool # 157 Tool # 158 Tool # 159 Tool # 160 Tool # 161 Tool # 162 Tool # 163 Tool # 164 Tool # 165 Tool # 166 Tool # 167 Tool # 168 Tool # 169 Tool # 170 Tool # 171 Tool # 172 Tool # 173 Tool # 174 Tool # 175 List Drawing Fonts Enclose Text in Box Align Text Objects Align Text Objects to a line Change Case Globally modify TEXT/MTEXT Draw Quick Text (running numbers) Draw Multiple Text Text Filter Round Off Numeric text Slide (move) text relative to its rotation angle Write Text to File Global Multiple Text Editor Underline Text Consolidate Text into MText Split long text strings into individual strings Create text along a curve Unclutter text objects Create text aligned to a curve Create Date/Drawing Stamp Convert text strings to attribute definitions Convert attribute definitions to text objects AutoCAD Map Tools (not available in Bricscad, except where noted with a *)
6 Tool # 176 Convert Object Table Data to Xdata (for Bricscad / plain AutoCAD use) Tool # 177 Edit object data from AutoCAD Map (in Bricscad / plain AutoCAD) * Tool# 178 Transfer XData to object data (after Bricscad / plain AutoCAD edit) Tool # 179 Convert Object Table Data to Xdata Tool # 180 Transfer Object Data / Xdata between two objects Tool # 181 Transfer Object Table Data to Block Attributes Tool # 182 Transfer Block Attributes to Object Table Data Tool # 183 Transfer database linked data to object data Tool # 184 Create text labels from Object data / extended entity data Tool # 185 Transfer AutoCAD properties to Object Data Tool # 186 Assign elevations from object data Tool # 187 Merge two object tables Tool # 188 Remove duplicate object data records within objects Tool # 189 Rename Object Data Fields Tool # 190 Export Object Table Data to ASCII files Tool # 191 Export Object Table Field Structure to ASCII files Tool # 192 Transfer text strings to Object Data Tool # 193 List Object Data Tool # 194 Search and replace Object table data Tool # 195 Select Topology objects graphically Tool # 196 Copy Object Table definition Tool # 197 Define Object Table from block attributes Tool # 198 Define object table from linked database table Tool # 199 Global Object Data Editor Tool# 200 Multiple choice object data add/editor Tool # 201 Format text labels queried with 'Alter properties' Tool # 202 Break object but retain object data in both broken parts Tool # 203 Create auto-incrementing object table data Tool # 204 Check for no Xdata / Object Data Extended Entity Data Tool # 205 Tool # 206 Tool # 207 Tool # 208 Remove Xdata Search and replace extended entity data Display extended entity data from picked object Extract extended entity data to ASCII files Civil Tools Tool # 209 Tool # 210 Tool # 211 Tool # 212 Create TIN (Triangulated Irregular Network) Annotate chainages along a route Draw cross-sectional profile from 3D Polyline Adjust cross-section elevations
7 Tool # 213 Tool # 214 Tool # 215 Tool # 216 Draw Graded polylines Perform traverse error adjustment Create and Place Map Sheet Index Block Create Map Grid Miscellaneous Tool # 217 Tool # 218 Tool # 219 Tool # 220 Tool # 221 Tool # 222 Tool # 223 Tool # 224 Tool # 225 Tool # 226 Tool # 227 Tool # 228 Tool # 229 Tool # 230 Tool # 231 Tool # 232 Tool # 233 Tool # 234 Tool # 235 Tool # 236 Tool # 237 Tool # 238 Tool # 239 Tool # 240 Tool # 241 Tool # 242 Tool # 243 Tool # 244 Tool # 245 Tool # 246 Tool # 247 Tool # 248 Scan selected image files and build image boundary list Insert geo-referenced image corresponding to selected AOI Import (read) a MINEX coal reserves data file Insert a geo-referenced image Object Chopper Automatic Dimensioning Layers to DWG Match Properties Roughen a Line Compute Surface Area of 3DFACEs Align Objects Control 3dface Face Normals Extract from XREF Multiple drawings XREF Sort ASCII files Round Off Values from points/lines Multiple DWG Inserts Split a drawing into smaller parts Re-Create Hatch boundaries from HATCH object Layer Names Editor Export 3dface objects into SMS 2DM file format Import 2DM files as 3dface objects Explode objects - Retain Object Table and extended entity data Batch process multiple drawings with scripts Contour Spacing Distance Tool Break(Split) objects along a polyline Zoom to extent of selected object(s) (with 5% margin) Scale objects (unequally) in X, Y and Z directions Create a mean (averaged) point from a cluster of points Enter geographical coordinates-latitude,longitude,height Flip (reverse) elevations(z) from selected objects Classify Elevation Contours Selection
8 Tool # 249 Tool # 250 Tool # 251 Tool # 252 Tool # 253 Tool # 254 Polylines based on properties 3DFaces based on properties Enhanced Entity Selector Build Selection Set Find objects in selected Z range Select Current Layer / Current Style Inquiry Tool # 255 Tool # 256 Tool # 257 Tool # 258 Tool # 259 Tool # 260 Tool # 261 Tool # 262 Tool # 263 Display angle between two lines Display info. about polyline bulge (arc segments) Compute Center of Gravity Display Drawing Statistics Compute running distance/perimeter Compute summed areas of closed polylines Object Selection Browser Quick elevation Info Enhanced DIST command Layer Tool # 264 Tool # 265 Tool # 266 Tool # 267 Tool # 268 Tool # 269 Isolate layer(s) Restore Isolated layer(s) Save / Restore Layer States Change to current layer Copy to current layer Copy layer contents to another layer
Vertex Management GT_FIXCLOSED Add / Remove redundant closing vertex in polylines GT_DELSVP Delete single vertex polylines
GeoTools Polyline Tools Join GT_3DJ GT_PLJOIN Join 3D Polylines Automated Join - 2D polylines Change 2d3d2d GT_CH2D3D GT_CH3D2D 2D-to-3D 3D-to-2D Vertex Management GT_FIXCLOSED Add / Remove redundant closing
More information1: INTRODUCTION TO AUTOCAD
AutoCAD syllabus 1: INTRODUCTION TO AUTOCAD Starting AutoCAD AutoCAD Screen Components Drawing Area Command Window Navigation bar Status bar Invoking Commands in AutoCAD Keyboard Ribbon Application Menu
More informationARC By default AutoCAD will draw an ARC through three selected points. Options can be set at the start and within the command.
DFTG 1309 Final Review Notes I. Draw commands: LINE (draws a series of lines) Valid input: Pick button Cartesian coordinates Absolute (2,3) Relative rectangular (@2,3) Relative polar (@ 2
More information1.6.7 Add Arc Length Dimension Modify Dimension Value Check the Sketch Curve Connectivity
Contents 2D Sketch... 1 1.1 2D Sketch Introduction... 1 1.1.1 2D Sketch... 1 1.1.2 Basic Setting of 2D Sketch... 2 1.1.3 Exit 2D Sketch... 4 1.2 Draw Common Geometry... 5 2.2.1 Points... 5 2.2.2 Lines
More information06/17/02 Page 1 of 12
Understanding the Graphical User Interface When you start AutoCAD, the AutoCAD window opens. The window is your design work space. It contains elements that you use to create your designs and to receive
More informationDharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester
Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationTutorial Guide to AutoCAD 2015
Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationTutorial Guide to AutoCAD 2014
Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationTutorial Guide to AutoCAD 2013
Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com
More informationn 4ce Professional Module
n 4ce Fact Sheet n 4ce Professional Module For the discerning user with specialist needs, n 4ce Professional provides extra facilities in Design and 3D presentations. Using the same platform as Lite, extra
More informationSPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS
SPRINGFIELD TECHNICAL COMMUNITY COLLEGE ACADEMIC AFFAIRS Course Number: ARBT 125 Department: Architecture and Building Technology Course Title: Architectural CAD I Semester: Fall Year: 2013 Objectives/
More informationAutoCAD Civil 3D 2009 ESSENTIALS
AutoCAD Civil 3D 2009 ESSENTIALS SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. Alignments and Profiles Section 2: Profiles In this section you learn how
More informationCOURSE: INTRODUCTION TO CAD GRADES: UNIT: Measurement
UNIT: Measurement - Students will demonstrate correctness in measuring using various scales and instruments. Demonstrate the various marks that make up a ruler including 1/16, 1/8, ¼ and ½. Assessment
More informationDean Muccio AutoCAD Interior Designer. for the. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2020 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationDean Muccio. AutoCAD 2018 for the. Interior Designer. AutoCAD for Mac and PC SDC. Better Textbooks. Lower Prices.
Dean Muccio AutoCAD 2018 for the Interior Designer AutoCAD for Mac and PC SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationCOMPUTER AIDED DRAFTING LAB (333) SMESTER 4
COMPUTER AIDED DRAFTING LAB (333) SMESTER 4 Introduction to Computer Aided Drafting: The method of preparing engineering drawing by using the computer software is known as Computer Aided Drafting (CAD).
More informationLesson 6 2D Sketch Panel Tools
Lesson 6 2D Sketch Panel Tools Inventor s Sketch Tool Bar contains tools for creating the basic geometry to create features and parts. On the surface, the Geometry tools look fairly standard: line, circle,
More informationCreo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling
Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...
More informationAutoCAD Civil 3D 2013 South African Country Kit
AutoCAD Civil 3D 2013 South African Country Kit Contents 1 General... 3 1.1 Introduction from the author and creator... 3 1.2 Overview... 4 2 Drawing Settings... 8 2.1 Edit Drawing Settings... 8 3 Layers...
More informationAutocad Basics 7/28/2009. Chapter 14 - Learning Objectives
Chapter 14 - Learning Objectives Autocad Basics Chapter 14 July 28, 2009 Use grips to stretch, copy, move, rotate, scale, and mirror objects. Edit objects using the Quick Properties panel and the Properties
More informationSolidWorks 95 User s Guide
SolidWorks 95 User s Guide Disclaimer: The following User Guide was extracted from SolidWorks 95 Help files and was not originally distributed in this format. All content 1995, SolidWorks Corporation Contents
More informationIntroduction to ANSYS DesignModeler
Lecture 4 Planes and Sketches 14. 5 Release Introduction to ANSYS DesignModeler 2012 ANSYS, Inc. November 20, 2012 1 Release 14.5 Preprocessing Workflow Geometry Creation OR Geometry Import Geometry Operations
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More informationCome Back to the Other Side - AutoCAD for MicroStation Users
11/30/2005-8:00 am - 9:30 am Room:Peacock 2 (Swan) Walt Disney World Swan and Dolphin Resort Orlando, Florida Come Back to the Other Side - AutoCAD for MicroStation Users Mark Mates - ProSoft GD31-2 This
More informationAn Introduction to Autodesk Inventor 2011 and AutoCAD Randy H. Shih SDC PUBLICATIONS. Schroff Development Corporation
An Introduction to Autodesk Inventor 2011 and AutoCAD 2011 Randy H. Shih SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation An Introduction to Autodesk Inventor 2011 and AutoCAD 2011
More informationAutoCAD Architecture 2018 Fundamentals
Elise Moss Autodesk AutoCAD Architecture 2018 Fundamentals SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites
More informationGstarCAD Mechanical 2015 Help
1 Chapter 1 GstarCAD Mechanical 2015 Introduction Abstract GstarCAD Mechanical 2015 drafting/design software, covers all fields of mechanical design. It supplies the latest standard parts library, symbols
More informationGeoTools. GeoTools Tool List. Super-charging BricsCAD and AutoCAD with productivity boosting tools since 1999
lp GeoTools GeoTools Tool List Super-charging BricsCAD and AutoCAD with productivity boosting tools since 1999 Polyline Tools Join GT_3DJ GT_PLJOIN Join 3D Polylines Automated Join - 2D polylines Change
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE. Introduction to Computers and AutoCAD
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: Introduction to Computers and CODE NO. : SEMESTER: 2 PROGRAM: AUTHOR: Civil Engineering Technician Construction
More informationAutodesk AutoCAD Architecture 2015 Fundamentals
Autodesk AutoCAD Architecture 2015 Fundamentals Elise Moss SDC P U B L I C AT I O N S Authorized Author Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the
More informationAdvance Concrete 2014 Service Pack 1
Advance Concrete 2014 Service Pack 1 This document describes the improvements in Service Pack 1 for Advance Concrete 2014. GENERAL Interaction between Advance Concrete and Advance Steel. Advance Steel
More informationA TUTORIAL GUIDE TO FOR WINDOWS* Includes Coverage of. Addison-Wesley Publishing Company
A TUTORIAL GUIDE TO AUTOCAD RELEASE 13 FOR WINDOWS* Includes Coverage of AutoVision and AutoCAD Designer Shawna D. Lockhart TT Addison-Wesley Publishing Company Reading, Massachusetts Menlo Park, California
More informationArchitecture 2012 Fundamentals
Autodesk Revit Architecture 2012 Fundamentals Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial files on enclosed CD Visit
More informationLD20558-L Parking Lots with AutoCAD Civil 3D Corridors
LD20558-L Parking Lots with AutoCAD Civil 3D Corridors Steven Hill CAD Manager, Civil Designer / Geosyntec Consultants.NET Application Developer / Red Transit Consultants, LLC Learning Objectives Discover
More informationRevit Structure 2012 Basics:
SUPPLEMENTAL FILES ON CD Revit Structure 2012 Basics: Framing and Documentation Elise Moss autodesk authorized publisher SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation Structural
More informationA Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2017 All rights reserved. No
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationTools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS
Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS
More informationGeoTools. GeoTools Tool List. Super-charging BricsCAD and AutoCAD with productivity boosting tools since 1999
lp GeoTools GeoTools Tool List Super-charging BricsCAD and AutoCAD with productivity boosting tools since 1999 Polyline Tools Join GT_3DJ GT_PLJOIN Join 3D Polylines Automated Join - 2D polylines Change
More informationin the list below are available in the Pro version of Scan2CAD
Scan2CAD features Features marked only. in the list below are available in the Pro version of Scan2CAD Scan Scan from inside Scan2CAD using TWAIN (Acquire). Use any TWAIN-compliant scanner of any size.
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationInserting and Creating ImagesChapter1:
Inserting and Creating ImagesChapter1: Chapter 1 In this chapter, you learn to work with raster images, including inserting and managing existing images and creating new ones. By scanning paper drawings
More informationBeginner s Guide to SolidWorks Level I
Beginner s Guide to SolidWorks 2013 - Level I Parts, Assemblies, Drawings, Simulation Xpress Alejandro Reyes MSME, CSWP, CSWI SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices.
More informationArranging and Patterning Objects
C H A P T E R Arranging and Patterning Objects Learning Objectives After completing this chapter, you will be able to do the following: Relocate objects using the MOVE tool. Change the angular positions
More informationCOURSE OUTLINE. Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2
COURSE OUTLINE Course Number Course Title Credits DRA190 Introduction to Computer-Aided Drafting 2 Hours: Co- or Pre-requisite lecture/lab/other 1/2 Catalog description (2009-2011) Catalog Implementation
More informationALLYCAD TRAINING RESERVATION FORM ALL REGIONS & INTERNATIONAL
Arctipoint (Pty) Ltd Reg No 2016/529416/07 Trading as CIVIL DESIGNER SOUTH AFRICA ALLYCAD TRAINING RESERVATION FORM ALL REGIONS & INTERNATIONAL FAX OR EMAIL THIS FORM TO THE OFFICE BELOW THAT COVERS YOUR
More informationCreate Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models
GEN20552-L Create Compelling 2D Sections, Details, and Auxiliary Views from AutoCAD 3D Models J.C. Malitzke Digital JC CAD Learning Objectives Learn how to create drawing views of AutoCAD 3D models for
More informationIntroduction to Autodesk Inventor for F1 in Schools (Australian Version)
Introduction to Autodesk Inventor for F1 in Schools (Australian Version) F1 in Schools race car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s Digital
More informationWelcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators.
Workspace tour Welcome to Corel DESIGNER, a comprehensive vector-based package for technical graphic users and technical illustrators. This tutorial will help you become familiar with the terminology and
More informationRequired Materials For complete material(s) information, refer to
Butler Community College Science, Technology, Engineering, and Math Division Brett Trimpe Revised Spring 2016 Implemented Fall 2016 COURSE OUTLINE AutoCAD Basics Course Description EN 107. AutoCAD Basics.
More informationS206E Lecture 6, 5/18/2016, Rhino 3D Architectural Modeling an overview
Copyright 2016, Chiu-Shui Chan. All Rights Reserved. S206E057 Spring 2016 This tutorial is to introduce a basic understanding on how to apply visual projection techniques of generating a 3D model based
More informationA Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2015 All rights reserved. No
More informationPart Design. Sketcher - Basic 1 13,0600,1488,1586(SP6)
Part Design Sketcher - Basic 1 13,0600,1488,1586(SP6) In this exercise, we will learn the foundation of the Sketcher and its basic functions. The Sketcher is a tool used to create two-dimensional (2D)
More informationConquering the Rubicon
Autodesk Inventor R10 Fundamentals: Conquering the Rubicon Elise Moss SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Schroff Development Corporation P.O. Box 1334
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationModule 10. Assemblies and Corridors. Objectives
NOTES Module 10 Assemblies and Corridors In this module, you learn to work with assemblies and corridors in AutoCAD Civil 3D. Corridor models are used to represent road designs in Civil 3D. An assembly
More informationBeginner s Guide to SolidWorks Level I
Beginner s Guide to SolidWorks 2014 - Level I Parts, Assemblies, Drawings, PhotoView 360 and Simulation Xpress Videos Now includes SolidWorks training videos Alejandro Reyes MSME, CSWP, CSWI Multimedia
More informationSurvCADDR. Section - Profile Module. File Modify Display Draw Inq-Set Pnts Profiles Design Sections Misc PRODUCT DESCRIPTION BENEFITS & ADVANTAGES
File Modify Display Draw Inq-Set Pnts Profiles Design Sections Misc SurvCADDR Section - Profile Module PRODUCT DESCRIPTION engineeringsoftwareforanexpandinguniverse The Section - Profile Module creates
More informationIntroduction to IntelliCAD 6
Introduction to IntelliCAD 6 These notes explain the basic concepts and techniques for doing 2D line drawings, with dimensions, arranged onto sheets for printing, using the 6.4 or 6.6 versions of IntelliCAD
More informationActivity 5.2 Making Sketches in CAD
Activity 5.2 Making Sketches in CAD Introduction It would be great if computer systems were advanced enough to take a mental image of an object, such as the thought of a sports car, and instantly generate
More informationDrawing and Assembling
Youth Explore Trades Skills Description In this activity the six sides of a die will be drawn and then assembled together. The intent is to understand how constraints are used to lock individual parts
More informationAdvance Steel suite 6.1 / SP2
Advance Steel suite 6.1 / SP2 This document describes only the improvements in Service Pack 2 compared to Service Pack 1. The installation of SP2 includes SP1; please see the previous document for improvements
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationTable of Contents. Dedication Preface. Chapter 1: Introduction to CATIA V5-6R2015. Chapter 2: Drawing Sketches in the Sketcher Workbench-I.
Table of Contents Dedication Preface iii xvii Chapter 1: Introduction to CATIA V5-6R2015 Introduction to CATIA V5-6R2015 1-2 CATIA V5 Workbenches 1-2 System Requirements 1-4 Getting Started with CATIA
More informationCopyrighted. Material. Copyrighted. Material. Copyrighted. Copyrighted. Material
Engineering Graphics FREEHAND SKETCHING Introduction to Freehand Sketching Sketching is a very important technique for technical communication. Sketches can transfer ideas, instructions and information
More informationComputer Aided Electrical Drawing Laboratory Manual. Table of Contents
1 Sl No Computer Aided Electrical Drawing Laboratory Manual Table of Contents Name of the drawing Page Number 1. Basic drawing commands for autocad 4 2. Standard Electrical component symbols. 10 3. 4.
More informationIntroduction to Polylines and Multilines Chapter 15
Introduction to Polylines and Multilines Chapter 15 Sacramento City College EDT 310 Chapter 15 - Introduction to Polylines and Multilines 1 Polylines Chapter 15 - Introduction to Polylines and Multilines
More informationCOMPUTER AIDED ENGINEERING DRAWING
FIRST SEMESTER COMPUTER AIDED ENGINEERING DRAWING COMPUTER SIMULATION LAB DEPARTMENT OF ELECTRICAL ENGINEERING Prepared By: Checked By: Approved By: Engr. Sidra Jhangir Engr. M.Nasim Khan Dr.Noman Jafri
More informationAutodesk. AutoCAD Architecture Fundamentals. Elise Moss SDC PUBLICATIONS. Schroff Development Corporation
Autodesk AutoCAD Architecture 2008 Fundamentals Elise Moss SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com Lesson 3 Floor Plans The floor plan is central to any
More informationAutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.
AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to
More informationType A. BWSC CAD Standards for Site Plans (Design and As-Built) Format. Scale. Fonts, Linetypes, Shapes
BWSC CAD Standards for Site Plans (Design and As-Built) Type A The following CAD standards are for Type A application and involve no work in Public Street, except for connection(s) to the Boston Water
More informationNew Sketch Editing/Adding
New Sketch Editing/Adding 1. 2. 3. 4. 5. 6. 1. This button will bring the entire sketch to view in the window, which is the Default display. This is used to return to a view of the entire sketch after
More informationEditing Polylines. Sacramento City College Engineering Design Technology. Editing Polylines 1
Editing Polylines Sacramento City College Engineering Design Technology Editing Polylines 1 Objectives Use the PLINE command to draw polylines and polyarcs. Edit existing polylines with the PEDIT command.
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationTHENI CE COMPUTER AIDED DESIGN & DRAFTING LABORATORY MANUAL
NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY THENI CE 6711 - COMPUTER AIDED DESIGN & DRAFTING LABORATORY MANUAL PREPARED BY RECOMMENDED BY APPROVED BY STAFF INCHARGE HOD/CIVIL PRINCIPAL GENERAL
More informationSection 1. Introduction and Review. Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics
Section 1 Introduction and Review Objectives: Log on to the computer Launch AutoCAD Create, open, and save a drawing Review AutoCAD basics Drawing Assignments: NCAA Basketball Court Plot Style Table (Check-off)
More informationIntroduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW
Emmett Wemp EDTECH 503 Introduction to Autodesk Inventor User Interface Fill in the blanks of the different tools available in the user interface of Autodesk Inventor as your instructor discusses them.
More informationAutoCAD LT 2009 Tutorial
AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson
More informationBlock References and Attributes
CHAPTER 11 Block References and Attributes PROJECT EXERCISE 11A This project exercise provides point-by-point instructions for creating the objects shown in Figure P11A 1. In this exercise, you will apply
More informationState of Florida Department of Transportation. FDOT Traffic Plans. Signing & Pavement Markings (CE ) Signalization (CE ) Lighting
State of Florida Department of Transportation FDOT Traffic Plans Signing & Pavement Markings (CE-11-0117) Signalization (CE-11-0119) Lighting (CE-11-0118) User Training Manual October 2017 PRODUCTION SUPPORT
More informationAutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation
AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction
More informationGetting Started with Revit
AUTODESK Autodesk REVIT Revit TRAINING Training TUTORIAL Tutorial Getting Started with Revit FOCUS Focus KUWAIT Kuwait CAD Cad Team 2012-13 Step 01 02 Grid & levels Grid create 5 vertical grid lines grid
More informationA Practical Guide to AutoCAD 2019
A Practical Guide to AutoCAD 2019 Tracy Chadwick and Rick Ellis Foreword written by Lynn Allen A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2018 All rights reserved. No part of
More informationLesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
More informationToothbrush Holder. A drawing of the sheet metal part will also be created.
Prerequisite Knowledge Previous knowledge of the following commands is required to complete this lesson; Sketch (Line, Centerline, Circle, Add Relations, Smart Dimension,), Extrude Boss/Base, and Edit
More informationSolidWorks 2013 Part I - Basic Tools
SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationPart Design Fundamentals
Part Design Fundamentals 1 Course Presentation Objectives of the course In this course you will learn basic methods to create and modify solids features and parts Targeted audience New CATIA V5 Users 1
More informationMade Easy. Jason Pancoast Engineering Manager
3D Sketching Made Easy Jason Pancoast Engineering Manager Today I have taught you to sketch in 3D. It s as easy as counting ONE, TWO, FIVE...er...THREE! When your sketch only lives in Y and in X, Adding
More informationCreate styles that control the display of Civil 3D objects. Copy styles from one drawing to another drawing.
NOTES Module 03 Settings and Styles In this module, you learn about the various settings and styles that are used in AutoCAD Civil 3D. A strong understanding of these basics leads to more efficient use
More informationSDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology
AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationFUSION 360: SKETCHING FOR MAKERS
FUSION 360: SKETCHING FOR MAKERS LaDeana Dockery 2017 MAKEICT Wichita, KS 1 Table of Contents Interface... 1 File Operations... 1 Opening Existing Models... 1 Mouse Navigation... 1 Preferences... 2 Navigation
More informationDrawing with precision
Drawing with precision Welcome to Corel DESIGNER, a comprehensive vector-based drawing application for creating technical graphics. Precision is essential in creating technical graphics. This tutorial
More informationFeatures and Benefits
AutoCAD Raster Design 2010 Features and Benefits Make the most of rasterized scanned drawings, maps, aerial photos, satellite imagery, and digital elevation models. Get more out of your raster data and
More informationWorking With Drawing Views-I
Chapter 12 Working With Drawing Views-I Learning Objectives After completing this chapter you will be able to: Generate standard three views. Generate Named Views. Generate Relative Views. Generate Predefined
More informationExplanation of buttons used for sketching in Unigraphics
Explanation of buttons used for sketching in Unigraphics Sketcher Tool Bar Finish Sketch is for exiting the Sketcher Task Environment. Sketch Name is the name of the current active sketch. You can also
More informationModule 1: Styles and Advanced Object Tools
Module 1: Styles and Advanced Object Tools This module contains: Section 1: General Style Information Using the Style Manager General Style Properties Working with Materials Classifications Display Properties
More information