GROUNDING. Ground-Lok CLAMP SYSTEM SERRATED HEAD - COMPONENTS

Transcription

1 PAGE 7 GRVES EXCLUSIVE Ground-Lok CLAMP SYSTEM SERRATED HD - COMPONENTS BRONZE CLAMPS Interchangeable clamps and adapters provide versatility Matching serrations assure positive lock of adapter to clamp Heavy duty construction - cast bronze body and plated steel screws G SERIES SIZE (IPS) TUBING SIZE CLAMPS 00 G / - / - / G G / - / - / - - # - 0 STR Clamp 060 G / G 0 CABLE ARMORED ADAPTERS /0 - #0 STR # - 0 STR Wire Adapter CONDUIT HUBS G G G THRD SIZE / / /0 - #0 STR /0 - #0 STR /0 - #0 STR Conduit Adapter Hub PLATING: For tin-plating add suffix letter P to S. UL listed to # AWG. CSA certified as shown. CLAMPS + ADAPTERS = 0 COMBINATIONS Available with brass screws. All adapters fit all clamps Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

2 PAGE G G G 5 G 6 INCLUDES ADAPTER TYPE ADAPTER WATER PIPE SIZE (IPS) / - / - / - / - 6 FOR / RIGID CONDUIT /0 STR Ground-Lok CLAMP SYSTEM SERRATED HD - ASSEMBLED BRONZE CLAMPS GRVES EXCLUSIVE G 5 G 6 G 8 G 9 / CONDUIT SIZE / - / - / - / - 6 /0 STR FOR / RIGID CONDUIT G 7 G 8 G G / CONDUIT SIZE / - / - / - / - 6 /0 STR FOR RIGID CONDUIT G 9 G 0 G G CONDUIT SIZE / - / - / - / - 6 /0 STR PLATING: For tin-plating add suffix letter P to S. UL listed to # AWG. CSA certified as shown. GBS SERIES Ground-Lok CLAMP SYSTEM BRASS SCREWS INCLUDES ADAPTER TYPE WATER PIPE SIZE (IPS) MAX G BS / G BS / # STR G BS / G BS G 0 BS G BS G BS G BS G BS G BS Wire / Conduit / Conduit Conduit Wire Wire / - 6 / - / - /0 STR /0 STR /0 STR /0 STR /0 STR /0 STR PLATING: For tin-plating add suffix letter P to S. UL listed to # AWG. CSA certified as shown. Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

3 PAGE G S G S SlZE (IPS) / - / - ECONOMY PIPE CLAMPS Bare Wire Type Cast bronze high-copper alloy pipe clamp with plated steel screws For bonding bare copper wire to water pipe, such as a water meter shunt G 0 G S SlZE (IPS) / - / - WlRE MAX # STR # STR FIG FIG FIG FIG FIG 5 5 Armored Wire Type Cast bronze high-copper alloy pipe clamp with plated steel screws For bonding bare or armored copper wire, also use with jacketed cables or cords Separate two-screw clamping strap for armor G 5S G 6S SlZE (IPS) / - / - WlRE MAX # STR # STR WlRE MAX #6 SOL #6 SOL 0 / Conduit Type Cast bronze high-copper alloy pipe clamp with plated steel screws Hub threaded for / conduit Connect wire under hub-screw 0 Brass Screw Type Cast bronze high-copper alloy pipe clamp with brass screws For bonding bare copper wire to water pipe, such as a water meter shunt G S-BS G S-BS G S-DB G S-DB G 0-DB SlZE (IPS) / - / - SlZE (IPS) / - / - / - WlRE MAX # STR # STR Type Cast bronze high-copper alloy pipe clamp with silicon bronze screws For bonding bare copper wire to water pipe, such as a water meter shunt UL listed for direct burial in earth or concrete, G 0-DB has armor clamp WlRE MAX. # STR # STR # STR PLATING: For tin plating add suffix letter P to catalog numbers. ALUMINUM CLAMPS High-strength tin-plated aluminum alloy, plated steel screws For bonding wire to water pipe, galvanized pipe, or steel conduit Figure Figure Figure Figure Figure 5 Dual-rated for aluminum or copper wire GAC GAC GAC SlZE (IPS) / - / - / - WlRE MAX. /0 - # - #6 - #6 FIG Figure 6 Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

4 PAGE 75 ROD CLAMPS Silicon bronze body Bronze or stainless steel bolt G SERIES G 9 G 0 G G G 0 G 580 G 0 G 00 ROD SIZE (IN) / / / / HVY DUTY * HVY DUTY MAX # STR # SOL /0 SOL # SOL # STR /0 STR /0 STR /0 STR ECONOMY CLAMP 705 G E # STR PLATING: For tin plating add suffix letter P to S. * For allen set screws add suffix A to BRKAWAY BOLT Breakaway bolt head to assure torque and provide tamper resistance 690 G580B ROD SIZE (IN) MAX /0 - #8 AWG 0. UNIVERSAL LARGE- Extra heavy duty bronze body Stainless steel bolts More than / inches of contact with -bolt clamp *G5 G0 * Fits all size ground rods indicated. ROD SIZE (IN) / / - / MAX #6 SOL - MCM #6 SOL - MCM # SOL - MCM #8 SOL - /0 AWG LARGE TWO- Bronze body, stainless steel U-bolt More than / inches of contact area Fits all ground rod sizes up through inch diameter G0 ROD SIZE (IN) / - MAX #6 - MCM S PERPENDICULAR TO ROD #6-0MCM PARALLEL TO ROD 5 Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

5 PAGE 76 HIGH-WING SYSTEM Continuous Run Capability For Grounding and Bonding Applications include galvanized pipe, rod, tube, fencing, rebar (#6, / and up) Continuous run, lay-in design Suitable for use in harsh environments such as agricultural buildings, swimming pool/spa, food processing, marine, grounding grid and others Orient head in any direction - lock in position with serrated teeth Replaces exothermic welding Corrosion-resistant cast bronze alloy body, silicon bronze hardware Approved for direct burial in earth and concrete G-DB SERIES G 0-DB G 0-DB G 0-DB G 60-DB Not for use on epoxy coated rebar SlZE (IN) / - / - / - / - 6 REBAR SIZE # INCH 6-9 / - /8 /8 /0STR-#0SOL GRVES EXCLUSIVE Wire up to #/0 AWG Pipe sizes / to 6 REBAR CLAMPS Jones Bond Lay-in Rebar Clamp for Continuous Loop Grounding / Bonding Pool / Spa bonding and grounding Ufer Grounding (concrete encased electrodes) Replaces Exothermic Welding Installs quickly, grips rebar firmly between ridges with special teeth Bronze body, stainless steel screw for direct burial CSA Certified for direct burial in earth and concrete on rebar J-DB SERIES J 9-DB J 0-DB *J -DB ** J -DB Not for use on epoxy coated rebar. *UL listed for # STR - # STR ** UL pending #6 SOL - 8 SOL # STR - 8 SOL /0 STR - 6 SOL /0 STR - 6 SOL REBAR SIZE # INCH / 5,5,6 /,,/ WEIGHT LBS/ Patent Pending Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

6 PAGE 77 Use to connect wire to rebar J-DB SERIES J 9-DB J 0-DB J -DB ** J -DB Not for use on epoxy-coated rebar *UL listed for # STR - # STR G 0-DB G 0-DB REBAR SIZE # INCH / 5,5,6 /,,/ REBAR SIZE # INCH 6-9 / - /8 /8 #6 SOL - 8 SOL # STR - 8 SOL /0 STR - *6 SOL /0 STR - 6 SOL **UL pending REBAR UFER CLAMPS Lay-in feature allows continuous loop wiring Bronze bodies with bronze or stainless steel hardware For use in other harsh environments such as swimming pool/spa, agricultural buildings, food processing, marine, communications grid and others Compared to compression and exothermic methods for rebar Ufer grounding and bonding, Greaves mechanical clamps provide fast installation and range-taking capability. /0STR - #0SOL Jones Rebar Clamp Use to connect wire to galvanized water pipe, rod, tube, fence post, or rebar Orient head in any direction - lock in position with serrated teeth G-DB SERIES HIGH-WING System NEC Article.5(A)() requires all present grounding electrodes to be bonded together to form a grounding electrode system. Present concrete-encased electrodes (re-enforcing bar, or rebar) and/or grounded I-beam must be included in the grounding electrode system. The result is a more effective and reliable grounding system. R E B Use to connect wire to rebar or water pipe GR-DB SERIES G R-DB C 0 C 0 C 08 C C 0 REBAR SIZE # INCH REBAR SIZE # INCH / - / 7-8 7/ /8 - / / # - 0 /0 - # Lay-in Rebar Clamp Use to connect wire to galvanized water pipe, conduit, rod, tube, fence post, or rebar Connects wire either parallel or 90 to pipe C00 SERIES See C00 Series for complete listing of sizes. Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT).6 U-Bolt Clamp Parallel or 90 connection to rod or pipe A R 005 NEC.5(A)() requires bonding all present grounding electrodes, including concrete-encased electrodes (Ufer).

7 PAGE 78 POOL and SPA GRVES EXCLUSIVE CONTINUOUS LOOP BONDING & Swimming pools / spas, foundation footings, agricultural buildings and other difficult environments JONES REBAR CLAMP Connect grounding electrode conductor to rebar (concrete encased electrode) Rugged and compact with no awkward projections - easy coverage in concrete Lay-in feature allows continous-run or termination Cast bronze body with stainless steel hadrware The J-DB handles a range of rebar sizes and wire sizes CSA (C US) certified and UL listed for direct burial in earth or concrete Rebar Clamp J 9-DB J 0-DB J -DB ** J -DB 6 SOL - #8 STR - #8 SOL /0 STR - *#6 SOL /0 STR - #6 SOL J-series clamps are designed for bare rebar only Do not use on ground rod, pipe, or epoxy-coated rebar Installation torque in-lbs REBAR SIZE # INCH / 5,5,6 /,,/ BVER TOOTH LUG Use on electrical equipment, pool/spa equipment, conduit bushings, jumper to multiple conduits Copper body, stainless steel screw, for use with copper wire only Lay-in-Lug BTL -DB BTL -DBP BTL -DB BTL -DBP # - AWG # - AWG # - AWG # - AWG BUGLUGS Heavy duty silicon bronze and copper, tin-plated For use with copper wire only BOLT SIZE #0 #0 / / MESH-BUG Use to connect copper conductor to wire mesh Copper-alloy bronze construction Sizes available for rolled (#0) and heavy (#6) wire mesh UL listed for direct burial in earth and concrete BL 6 BL BL BL /0 A-DB A-DB A5-DB A8-DB A0-DB MAX #6 # # /0 MESH/ SIZE #0 #0 #6, #0 # #/0 *UL listed for # STR - # STR **UL pending MOUNTING BOLT SIZE #0 / / 5/6 COPPER COND. (AWG) #8 - AWG #6 SOL - 8 AWG # AWG - 8 SOL # - 6 AWG #/0 - AWG DBP is tin-plated for use on aluminum pool structure. Use of oxide-inhibitor is recommended. Tin-plated for use on aluminum pool structure. Use of oxide-inhibitor is recommended Lay-in-Lug Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT) Patent Pending Patent Pending 86D 86D

8 PAGE 79 POOL and SPA ROD CLAMPS For connecting ground wire to ground rod Cast bronze body with silicon bronze bolt, for use with copper wire only UL listed for direct burial in earth and concrete G 9 G 0 G G G 00 G S-DB G S-DB ROD SIZE (IN) / / SIZE (IPS) / - / - MAX # STR # SOL /0 SOL # SOL /0 STR MAX # STR # STR PIPE CLAMPS For connecting ground wire to water pipe Cast bronze body, silicon bronze screws, for use with copper wire only UL listed for direct burial in earth and concrete C 0 C 0 C 08 C C 0 C C ROD SIZE (IN) / - / 7/8 - SIZE (IPS) / / - / / U-BOLT CLAMPS Heavy Duty U-bolt Clamps Use to connect wire to pipe, rod, or fence posts Cast bronze bodies with silicon bronze hardware, for use with copper wire only CSA NRTL/C Certified for direct burial in earth and concrete See C00 Series for complete listing of sizes. PLATING: For tin plating of above items add suffix P to SS 0-A SS 0-B SS 0-C SS 0-D SS 0-A SS 0-B SS 0-C SS 0-D SCREW SIZE L (IN) / 0- /-0 / / / / / CABLE /0 - # /0 - # STAINLESS STEEL HARDWARE KITS Sets of stainless steel screws, washers, and nuts Use to mount BTL-DB and BL Series lugs to equipment Each kit packaged in clear plastic display box KIT CONTENTS SCREWS WASHERS NUTS FLAT LOCK 00 For larger sizes of stainless steel or silicon bronze see HARDWARE pages KIT KIT KIT KIT KIT KIT KIT KIT C C Parallel or 90 connection to rod or pipe Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

9 PAGE 80 POOL and SPA EQUIPOTENTIAL BONDING COPPER BONDING MESH KITS Use to provide equipotential bonding grid under pool perimeter surfaces, under paving stones or concrete Fulfills 008 NEC Article 680.6(B)()(b) requirements Made of #8AWG solid copper with exothermically welded joints Kits include hardware listed below Each kit is individually boxed 008 NEC Article 680.6(B)()(b) and 680.6(B)() excerpts: A copper conductor grid shall be provided and be constructed of minimum 8 AWG bare copper conductors bonded to each other at all points of crossing be arranged in a 00mm ( in) by 00mm ( in) network of conductors in a uniformly spaced perpendicular grid pattern with a tolerance of 00mm ( in) the perimeter surface shall extend for m ( ft) horizontally beyond the inside walls of the pool and shall include unpaved surfaces as well as poured concrete and other types of paving. CBM SERIES MAT L MESH DIMENSIONS W (FT) L (FT) S (IN) W = width L = length S = distance between wires KIT CONTENTS CLAMP SPLIT BOLTS STAKES CBMK CBM0K CBM5K CBM0K #8CU #8CU #8CU #8CU INSTALLATION - Unroll into position. Use holding stakes to assist one-man work. - Bond to rebar with rebar clamp provided (accepts two #8 wires), or Jones Rebar clamp #J9-DB ( rebar), or #J0-DB (/ rebar), or #GR-DB ( - rebar). - For contours, shape the mesh wire or cut and splice - Bond mesh sections together with direct burial split bolts supplied or Greaves #A-DB or #A5-DB. Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

10 PAGE 8 FLEXIBLE STRAP SYSTEM PIPE CLAMPS FOR FLEXIBLE STRAPS For grounding flat flexible strap to fence posts, gates or water pipe Bronze high-copper alloy castings For copper strap CF SERIES PIPE SIZE IPS STRAP MAX W (IN) 70 CF CF / CF 5 / CF CF / CF CF 5 /.6 70 CF 0. 7 CF CF FLEXIBLE JUMPER STRAP CONNECTORS Use to absorb expansion, misalignment, or motion of equipment Use with CF Series clamps to bond fencepost to gate Flexible flat woven tin-plated copper braid Seamless high-conductivity tin-plated copper flat ferrules FJ SERIES FJ 00-8N FJ 00-8N FJ 00-8N EQUIV. SIZE (APPROX) # AWG /0 AWG /0 AWG NOMINAL AMP RATING* INDOOR OUTDOOR NOMINAL DIMENSIONS L W T 8 /8 8 /6 8 / * Ampacity varies with service conditions such as environment, airflow, orientation, temperature rise, etc. NEMA bolt pattern for () / bolts on / centers. Other configurations and sizes available; consult factory. Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

11 PAGE 8 -PRES IRREVERSIBLE COMPRESSION SYSTEM Irreversible compression C tap connectors for direct burial grounding grid applications LN-DB GBC GPP GPC C-DB GPU GPL GPR Tap or lap-splice for wire-to-wire connections GPC SERIES GPC6 GPC GPC6 GPC GPC00 GPC00 GPC00 GPR MAIN #STR-6SOL #STR-SOL /0-/0STR /0-/0SOL TAP #6STR-6SOL #STR-SOL #6STR-8SOL #STR-SOL /0STR-/0SOL /0STR-/0SOL /0STR-/0SOL DIE BG or C O F or D CAUTION Use of wash-off resistant oxide-inhibitor is recommended with all underground joints. Tap or lap-splice for ground rod-to-wire or wire-to-wire connections GPR SERIES GPR GPR0 GPR GPR GPR0 GPR GPR MAIN TAP ROD /,, / MCM- /0 STR 0- MCM #STR-SOL /0-/0STR MCM-/0STR #STR-SOL /0-/0STR MCM-/0STR 0MCM/0STR DIE or Perpendicular configuration for ground rod-to-wire or wire-to-wire connections GPL SERIES GPL GPL GPL GPL GPL GPL A B ROD /,, / #STR-6SOL MCM-STR MCM-#STR 0-MCM #STR-6SOL #STR-6SOL MCM-# #STR-6SOL MCM-# 0-MCM DIE A B O O 997 O O Hydrauiic tool required fo installation for all except GPL. Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

12 PAGE L0NDB L0NDB L0NDB L0NDB LNDB LNDB L0NDB -PRES IRREVERSIBLE COMPRESSION SYSTEM COMPRESSION TERMINAL Irreversible compression terminal for direct burial grounding grid applications Seamless high-conductivity copper NEMA bolt spacing - for / bolts on / centers Pre-filled with oxide inhibitor and capped L-NDB SERIES SIZE /0 /0 /0 /0 MCM MCM 0MCM U-TYPE DIE COLOR INDEX PINK /8 BLACK O PURPLE 5 YELLOW 6 RED 8/ BROWN 0/99 PINK BLACK O PURPLE YELLOW RED BROWN COMPRESSION SPLICE Irreversible compression splice for direct burial grounding applications Seamless high-conductivity copper Two inspection holes, one for each wire Pre-filled with oxide-inhibitor and capped C-DB SERIES C0DB C0DB C0DB C0DB CDB CDB C0DB SIZE /0 /0 /0 /0 MCM MCM 0MCM U-TYPE DIE COLOR INDEX / / 0/ COMPRESSION PLATE Irreversible compression ground plate for direct burial grounding applications Body cast of high-strength, high-conductivity high-copper alloy NEMA spacing for tapped lug-mounting holes for / bolts on / centers Copper compression element of pure wrought copper, pre-filled with oxide-inhibitor Tapped positioning hole on underside of plate Plastic plugs provided in tapped holes GPP SERIES 6 GPP-N MCM-# 6 GPP-N *PT655 adapter required with some tools. ** -6 is standard; others available. DIE U997* MOUNTING HOLES () /- () /- POSITIONING HOLE -6**..7 Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

13 PAGE 8 I-BM CLAMPS To connect grounding electrode conductor to structural I-beam or metal frame Can also be used on fence posts, trailer frames, cable tray Series covers a wide range of beam and wire sizes Eliminates drilling structural steel Replaces exothermic welding FIG. FIG. FIG. GBCH High strength copper-alloy bronze casting Steel hardware, zinc plated Screw penetrates paint or oxide Use to terminate wire For use with copper wire only UL (CU only) GBCA Aluminum body, tin-plated Steel hardware, zinc plated Screw penetrates paint or oxide Dual-rated for copper or aluminum wire Side-entry allows continuous loop Also for sheet metal cable tray UL (CUAL), CSA (CU only) GBC0 High strength copper-alloy bronze casting Steel hardware, zinc plated Clean beam surface for electrical contact Side-entry allows continuous loop run Shape of hook may vary by size For use with copper wire only CSA (CU only) 005 NEC.5(A)() requires bonding all present grounding electrodes, including grounded I-Beams. GBC SERIES 790 GBCH6 BM FLANGE (IN) F TH MAX MAX MIN #6 - #AWG DIMENSIONS (IN) W L H 5 /8 /6 FIG GBCA / MAX MCM - #6 7/8 / GBC0- /6 /0 - #STR / / GBC0- / /0 - #STR 6 / / GBC /6 /0 - #STR 8 / / GBC0-8 8 /0 - #STR 0 / / 0.67 Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

14 PAGE 85 ADJUSTABLE STRAPS Adjustable ground straps are made from pure annealed copper Bolts, nuts and washers are plated steel Four sizes cover a ground pipe range of to For copper wire #-6SOL Ground wire connection can be soldered or solderless D 80 D 8 D 8 D 8 SIZE (IPS) HVY TYPE.0 THICK, / WIDE LIGHT TYPE.0 THICK, / WIDE D D D D PLATING: For tin plating add suffix letter P to S. PERFORATED COPPER STRAP Pure annealed 6 guage copper Holes accommodate / screws, spaced / on center Strap has full round edge WIDTH (IN) THICKNESS (IN) COIL LENGTH 705 D 0 /.0 0 FT. COIL For longer coils consult factory for availability. FLEXIBLE BRAID Flexible flat-woven tin-plated copper braid Use to absorb expansion, misalignment, motion, or vibration of equipment Use for bonding or grounding jumpers Use multiple layers to increase ampacity FB SERIES FB60 FB90 FB00 FB00 FB00 CIRCULAR MIL AR 9.6 kcmil kcmil 77 kcmil 5 kcmil kcmil EQUIV. SIZE (APPROX) #0 AWG #6 AWG # AWG /0 AWG /0 AWG NOMINAL AMP RATING* INDOOR OUTDOOR DIMENSIONS W T / / / / /8 /6 5/ * Ampacity varies with service conditions such as environment, airflow, orientation, temperature rise, etc. Also available as finished connectors with endpads; see FJ Series. Also available in bulk quantities. COIL LENGTH FT FT 0 FT 0 FT 0 FT COIL COIL COIL COIL COIL Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

15 PAGE 86 U-BOLT CLAMP CONNECTORS Heavy Duty - Bronze Castings for Strength and Ruggedness Use to connect wire to pipe, rod, or fence posts High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete C00 SERIES C 00 C 0 C 0 C 0 C 0 C 05 C 06 C 07 C 08 C 09 C 0 C C C 5 C 6 C 9 C 0 C C C C 6 C 7 C 8 C C C C C 6 C 7 C 8 C 9 C C C C C 6 C 7 C 8 C 9 C 5 C 5 C 5 C 5 ROD SIZE (IN) / - / 7/8 - PIPE SIZE IPS (O.D.) / (.5) (.675) / - / (.8) - (.05) (.5) / (.66) / (.90) (.75) / (.875) (.5) / (.0) (.5) For sizes not listed contact factory for delivery. PLATING: For tin plating add suffix P to catalog numbers. CABLE # - 8 /0 - # - /0 # - 8 /0 - # - / # - 8 /0 - # - / # - 8 /0 - # - / # - 8 /0 - # - / # - 8 /0 - # - / # - 8 /0 - # - / # - 8 /0 - # - / # - 8 /0 -# - / # - 8 /0 - # - / # - 8 /0 - # - / Connects one wire parallel or perpendicular to rod or pipe Heavy Duty Pipe sizes / to IPS Wire #8 to 0 MCM Applications Water Pipe Metallic Fencing Ground Rods Grounding Grids Rebar Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

16 PAGE 87 LARGE PIPE CLAMPS Extra heavy-duty bronze castings for strength and ruggedness Use to connect wire to pipe or fence posts Clamp first to pipe, then attach wire with cover piece Separate bolts for mounting on pipe and connecting wire High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete CG SERIES CG 0 CG 00 CG 60 CG 6 CG 6 CG 6 CG 60 CG CG CG 75 CG 0 CG 6 CG 6 CG 675 CG 60 CG CG CG 75 CG 0 CG 6 CG 6 CG 6 CG 60 CG 5 CG 5 CG 5 CG 575 CG CG 6 CG 6 CG 6 CG 675 CG 60 CG 70 CG 8 CG 8 CG 875 CG 80 CG 00 CG 0 CG 0 CG 60 PIPE SIZE IPS (O.D.) (.75) -/ (.875) (.5) -/ (.0) (.5) -/ (5.0) 5 (5.56) 6 (6.6) 6 Cast Iron ( ) 8 (8.6) 0 (0.75) (.75) (.0) 6 (6.0) CABLE # # - 8 /0 - # - / # - / # - / # - / # /0 - # - / # /0 - # - / # /0 - # - / # # - / # # # # # Sizes for other O.D. or circumference available. For sizes not listed contact factory for delivery. PLATING: For tin plating add suffix letter P to S. * 000MCM sizes not UL Listed. Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT) FIG Connects one wire parallel or perpendicular to pipe Figure Figure * Large pipe sizes to 6 IPS Large wire sizes to 000MCM

17 PAGE 88 U-BOLT CLAMP CONNECTORS Heavy Duty - Bronze castings for strength and ruggedness Use to connect wire to pipe or fence posts High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete CW SERIES CW CW 5 CW 0 CW CW 6 CW 7 CW 8 CW CW CW CW 7 CW 8 CW 9 CW CW CW SIZE (IPS) / / / CABLE # - /0 /0 - # - /0 /0 - # - /0 / # - /0 / # - /0 / # - /0 / U-BOLT CLAMP CONNECTORS Heavy Duty - Bronze castings for strength and ruggedness Use to connect wire to pipe or fence posts High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete CS SERIES CS 0 CS 0 CS 0 CS 05 CS 08 CS 09 CS 0 CS CS 5 CS 6 CS 0 CS CS CS 6 CS 7 CS 8 CS CS CS ROD SIZE (IN) / or / 7/8 or SIZE (IPS) / / - / / / CABLE # - /0 /0 - # - /0 /0 - # - /0 / # - /0 / # - /0 / # - /0 / # - /0 / Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT) Connects two cables parallel to pipe Connects two cables perpendicular to rod or pipe

18 PAGE 89 U-BOLT CLAMP CONNECTORS Heavy Duty - Bronze castings for strength and ruggedness Use to connect wire to pipe or fence posts High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete CZ SERIES ROD SIZE (IN) SIZE (IPS) CABLE CZ 0 CZ 05 or / # - /0 / CZ 08 # - / CZ 09 7/8 or / or / / CZ CZ # - /0. 95 CZ 5 / CZ CZ 0 # - /0.5 9 CZ / / CZ CZ 6 # - / CZ 7 / / CZ CZ # - /0.9 9 CZ / CZ CZ 7 CZ 8 CZ 9 / # - /0 / Connects three cables parallel to rod or pipe 9 CZ # - /0.7 9 CZ / CZ CZ 7 / # - /0.0 RAISED-FLOOR PEDESTAL CLAMPS Pedestal clamp for raised computer-floor grounding grid applications Accommodates one or two grounding wires Install on round or square pedestal, as noted Provides signal reference grid, static ground drain, fault current ground Bronze high-copper alloy body and silicon bronze hardware Suitable for direct burial in earth or concrete CR SERIES CR07 CR08 CR PEDESTAL SIZE (IN) TYPE / - ROUND / - 7/8 SQUARE / - ROUND / - 7/8 SQUARE / ROUND CONDUCTORS NO. SIZE or #8- STR or #-/0 STR or #-/0 STR T = Throat of U-bolt DIMENSIONS A B C D T Connects one or two cables perpendicular to pedestal T Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

19 PAGE 90 CABLE TRAY CONNECTORS CABLE TRAY CLAMP Bronze multi-purpose connector for tray, splice, tap, or cable-end High-copper alloy body Accommodates either one or two conductors Galvanized carriage bolt with square shoulder prevents turning Low profile head provides smooth surface on inside of tray Large contact surfaces to tray and wires for low resistance For use with copper conductor CTGG SERIES CTGG CTGG -P* MAIN TAP -/0 -/0 -/0 -/0 DIMENSIONS (IN) W L 7 /8 7 /8 BOLT SIZE -6 X -6 X *CTGG-P is tin-plated for use with aluminum conductor or on aluminum tray, use oxide-inhibitor. Available with silicon bronze hardware, add -BC to CTGG -P Shown Thru-Grip -TYPE CABLE TRAY CLAMP For grounding applications on wire-basket type cable tray Use to connect single jumper-wire to tray sections Bronze high-copper alloy body Unique design provides lay-in feature quick installation turn prevention Mount on tray-wire perpendicular to ground wire direction Direct wire-to-wire contact provides low-resistance connection Provides smooth surface on inside of tray For copper wire CT9 SERIES CT 9 CT 9-P* TRAY /8 - /6 /8 - /6 CONDUCTOR #0-6SOL #0-6SOL DIMENSIONS (IN) H L / / W Standard screw is round-head, recessed-socket, plated-steel Available with plated steel, slotted-head screw; add -SL to Available with silicon bronze hex-head screw; add -BH to *CT9-P is tin-plated SCREW SIZE /-0 X / /-0 X / Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

20 PAGE 9 BOND STUDS Lay-in connector for continuous loop grounding Use to ground or conductors to bar or plate High copper bronze alloy for maximum conductivity Suitable for direct burial in earth or concrete BS SERIES MAX. SIZE SOLID STRND. STUD SIZE THRD LENGTH ONE 7070 BS -7 #6 #7 / - 0 / BS -5 # #5 5/6-8 9/ BS - # # BS - # # BS -0 /0 /0 / - / BS -0 /0 /0 / - / BS -0 / TWO BS -7 BS -5 BS - BS - BS -0 BS -0 BS -0 #6 #7 # #5 # # # # /0 /0 /0 /0 /0 / -0 / 5/6-8 9/ / - / / - / For sizes not listed consult factory for delivery. Bronze nuts, flat washers and lockwashers available, see HARDWARE pages. PLATING: For tin plating add suffix P to S. For longer stud add suffix L to S, consult factory for availability. CONTINUOUS LOOP Lay-in Lug for Grounding or Continuous Loop Bonding Use on electrical equipment, conduit bushings, jumper to multiple conduits Heavy Duty - Bronze castings for strength and ruggedness High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete, copper cable only JR-DB BTL -DB BTL -DB J AR-DB J AR-DB J AR-DB J 5AR-DB J 6AR-DB J 7AR-DB J 8AR-DB MATERIAL BODY SCREW COPPER BRONZE STAINLESS BRONZE # - # - #- /0 - /0 /0 - /0 - / BOLT SIZE #0 / / / / / / Lay-in Lugs BTL-DB JAR-DB Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

21 PAGE 9 INTERSYSTEM BONDING TERMINATION METERBOX BONDING KIT Use to connect multiple intersystem conductors Accommodates up to wires #-AWG Mount on exterior of meter box or panel All kits include stainless steel mounting hardware Each kit is individually bagged MBKA Aluminum bar kit is suitable for indoor or dry outdoor use MBKC Copper bar kit is suitable for outdoor situations Cutaway of box 008 NEC article.9 requirements An intersystem bonding termination for connecting intersystem bonding and grounding conductors required for other systems shall be provided external to enclosures at the service equipment and at the disconnecting means for any additional buildings or structures. The intersystem bonding termination shall be accessible for connection and inspection. The intersystem bonding termination shall have the capacity for connection of not less than three intersystem bonding conductors. The intersystem bonding termination device shall not interfere with opening a service or metering equipment enclosure. H Each kit contains: () Bar with set-screws for wire connecting () Mounting screws /-0 X / stainless steel slotted head () Nuts /-0 stainless steel () External-tooth countersunk lock-washers / stainless steel L W MBK SERIES MBKC- MBKA- BAR MAT L CU* AL** DIMENSIONS (IN) W H L 7 /6 7 /6 MOUNTING HOLE DIA CENTERS / CLR /8 / CLR * CU bar (in #MBKC-) is CSA certified and UL recognized with zinc-plated steel set-screws; CU bar in kit has stainless steel (5/ hex-socket) set-screws suitable for outdoor locations. **Aluminum bar (in #MBKA-) is CSA certified. Screws are slotted-head zinc-plated mild steel. /8 KITS/ 0 0 INSTALLATION -Pre-position bar and drill one / inch clearance hole. Install bar loosely with one screw. Locate and drill second mounting hole. Clean inner metal surface if heavily coated (inner surface need not be cleaned if it is paint-coated less than.0 thick). -Position teeth of external-tooth washers down against inside surface of box, as shown, so they will penetrate paint to create the bonding connection. - Apply oxide-inhibitor or silicone sealant to bare metal surfaces of drilled holes and around mounting screws to create seal. -Finish the assembly and tighten the mounting screws to 7 in-lbs torque, to assure that the external-tooth washers penetrate paint to create the bonding connection. 5- Install wires into bar. Tighten set-screws to 0 in-lb on #AWG, 75 in-lb on #AWG, 60 in-lb on #6AWG, 55 in-lb on #8AWG. Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

22 PAGE 9 BUS BARS Use to connect multiple ground conductors/lugs in panels Includes stand-off brackets ( inch high) and insulators ( / inch high) Standoff brackets drilled for bolts Other lug-mounting patterns also available Copper bus / inch thick Individually packaged 5 / M W 6 / L GBBG Shown GBB SERIES NO. GBB6H GBBG GBBX GBBN DIMENSIONS (IN) W L 6 M 0 9 /6 0 9 /6 Available in other configurations, consult factory. For tin plating add suffix P to S. LUG-HOLES PATTERN NO. H G 8 X 6 N 0 Standard lug-hole patterns Lug-mounting holes are for bolt size (7/6 diameter) unless otherwise noted. H () lug-mounting holes ( bolt size) G (8) lug-mounting holes ( bolt size), for (9) -hole lugs ( inch spacing), or (8) -hole lugs X (6) lug-mounting holes for (6) -hole lugs ( bolt size, inch spacing), or () -hole lugs and () -hole lugs (/ bolt size, inch spacing) N Blank, supplied with no lug-mounting holes Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

23 PAGE 9 CROSS CONNECTORS Universal - for use as a tee, tap, parallel, end-to-end and cross Wide wire range capability Bronze body with bronze or stainless steel hardware Suitable materials for direct burial in earth or concrete C-X SERIES C X C X C X C 5X C 6X C 0X C 0X MAIN TAP MAX. /0 STR MCM 0 MCM 0 MCM 0 MCM 000 MCM 000 MCM MIN. SOL 6 SOL MCM MCM SOL AWG /0 AWG MAX. STR MCM STR /0 STR 0 MCM 000 MCM 000 MCM PLATING: For tin plating add suffix P to the catalog numbers. For sizes not listed consult factory. MIN. 6 STR 6 SOL 6 SOL STR SOL AWG /0 AWG 6 6 For copper cable TRANSFORMER CONNECTORS For transformers with /- tapped hole Bronze body - High conductivity copper alloy High strength bronze eye bolt, nut, lock washer GLT SERIES GLT GLT 0 GLT MAX. MIN. # STR #0 SOL /0 STR #8 SOL MCM #6 STR Plating: For tin plating add suffix P to Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)

24 PAGE 95 BAR OR TOWER CONNECTORS Heavy Duty - Bronze castings for strength and ruggedness Use for grounding cable or wire to a flat bar, plate, or structural steel member High copper alloy bronze castings with silicon bronze hardware Suitable for direct burial in earth or concrete For copper wire only TG SERIES CABLE MAX MIN BOLT SIZE 700 TG 0 # STR #8 SOL TG 0 /0 STR # SOL TG MCM /0 SOL 7/ TG 0 MCM 00 MCM / 0.87 TG 76 TG 75 7 MCM 5 MCM. 70 TGM 0 # STR #8 SOL 0. 7 TGM 0 /0 STR # SOL TGM MCM /0 SOL 7/ TGM 0 MCM 00 MCM / TGM 75 7 MCM 5 MCM Consult factory for connectors for bar greater than / thick. For tin plating add suffix P to S..0 TGM Connects one ground wire to / thick bar or stanchion TGG SERIES CABLE MAX MIN BOLT SIZE 70 TGG 0 # STR #8 SOL TGG 0 TGG /0 STR # SOL MCM /0 SOL 7/ TGG 77 TGG 0 MCM 00 MCM /. 78 TGG 75 7 MCM 5 MCM.0 7 TGGM 0 # STR #8 SOL TGGM 0 /0 STR # SOL TGGM MCM /0 SOL 7/ TGGM 0 MCM 00 MCM /.0 7 TGGM 75 7 MCM 5 MCM.00 TGGM Consult factory for connectors for bar greater than / thick. For tin plating add suffix P to S. Connects two ground wires to / thick bar or stanchion Heritage Park, Clinton, CT 06 Phone Fax TOLL FREE (Outside CT)