POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD 17 QUEEN VICTORIA ST, FREMANTLE WA PHONE (08) FAX (08) MWA-3028

Transcription

1 POSEIDON SCIENIIC INSRUMENS PY D 17 QUEEN VICORIA S, REMANE WA 10. PHONE (0) 90 9 AX (0) 9 0 CAE DRAWING: MWA-02 DRAWING IE: PSU DC Power Cable DRAWING NO.: MWACA-002 DRAWN Y: DRC DAE: 2-Nov- SHEE: 1 of 2 REV: A Cable Detail: Connectors: Description Parts (Qty) erminal JS - VWS1.2-A - Crimp, ork, mm, Red See Note1 elow(2) Conductors: Cable PRO POWER Wire, lack, 2/0AWG See Note2 elow(9cm) Overall ength +/-mm Notes: 1. he JS ork erminal can be supplied from Element1 # Any equivalent will be OK refer to data sheets supplied with this drawing. 2. he cable can be supplied from Element1 # Any equivalent will be OK refer to data sheets supplied with this drawing ypical Drawing: ypical Photo: REVISION Date Rev Remarks 1/12/09 A Draft 21/07/ A or Release 02/11/ A Salem Version arnell to Element1

2 CAE DRAWING: DRAWING IE: PSU DC Power Cable POSEIDON SCIENIIC INSRUMENS PY D 17 QUEEN VICORIA S, REMANE WA 10. PHONE (0) 90 9 AX (0) 9 0 MWA-02 DRAWING NO.: MWACA-002 DRAWN Y: DRC DAE: 2-Nov- SHEE: 2 of 2 REV: A Connection Detail: rom: (DC Power) Attached to the DC terminals on the PSU o: (DC Power) Attached to the PSU PC erminals. Assembly Details: REVISION Date Rev Remarks 1/12/09 A Draft 21/07/ A or Release 02/11/ A Salem Version arnell to Element1

3 SPADE ONGUE (A type) Non-insulated razed seam ød1 E ile No.: E202 R2012 Actual Refer to page 1 for actual size of the terminal. (except for 1.2-2A) Applicable Wire 2 to 22 (0.2 to 0.) 22 to 1 (0.2 to 1.) 1 to 1 (1.0 to 2.) 12 to (2. to.) Stud size American Metric / - - 1/ 1/ /1 2 2 Part No. Standard ool No. Qty/box E ø D ø d1 0.-2A 0.-A 0.-.7A 0.-A 1.2-2A 1.2-CA 1.2-A 1.2-MA 1.2-CA 1.2-A 1.2-NA 1.2-YSA 1.2-SA 1.2-PA 1.2-YSA 1.2-SA 1.2-A 1.2-SA 1.2-MA 1.2-A 1.2A 2-NA 2-MA 2-CA 2-YSA 2-SA 2-A 2-YSA 2-YMA 2-SA 2-A 2-MA 2-A 2-A.-SA.-A.-SA.-A.-A.A.-A 2.2 (.07).2 (.12).7 (.1). (.19) 2.2 (.07).2 (.12).2 (.12).2 (.12).7 (.1).7 (.1).7 (.1).7 (.1).7 (.1).7 (.1). (.19). (.19). (.19). (.209). (.209). (.209). (.22).2 (.12).2 (.12).7 (.1).7 (.1).7 (.1).7 (.1). (.19). (.19). (.19). (.19). (.209). (.209). (.22).7 (.1).7 (.1). (.19). (.19). (.209). (.22). (.1). (.11).0 (.197). (.22) 7.0 (.27). (.11). (.221). (.22). (.20). (.221). (.22).2 (.2). (.22) 7.2 (.2) 7. (.29). (.22) 7.2 (.2). (.) 7.2 (.2). (.) 9. (.7) 12.0 (.72).9 (.22).0 (.2). (.220). (.22) 7.2 (.2). (.). (.22). (.2) 7.2 (.2). (.). (.) 9. (.7) 12.0 (.72) 7.2 (.2) 9. (.7). (.) 9. (.7) 9. (.7) 1 (.2) 1 (.2) 12. (.0) 12. (.92) 1.0 (.91) 1.2 (.) 1. (.7) 1. (.22) 1. (.22) 1.0 (.0) 1. (.22) 1. (.22) 1. (.22) 1. (.0) 1. (.22) 1. (.) 1. (.0) 1. (.22) 1. (.22) 1. (.22) 1. (.22) 1. (.22) 22.0 (.) 1. (.22) 1. (.71) 1. (.22) 1. (.0) 1.0 (.0) 1. (.1) 1. (.0) 1. (.0) 1.0 (.0) 1. (.1) 1. (.1) 1. (.1) 22.0 (.) 19. (.7) 19. (.7) 19. (.7) 19. (.7) 19. (.7) 2. (1.00) 2. (1.00). (.177).0 (.2) 7.7 (.0). (.2). (.19). (.2). (.2).0 (.1). (.2). (.2). (.2). (.2). (.2). (.217). (.2). (.2) 7.0 (.27). (.2) 7.0 (.27) 7.0 (.27) 11.0 (.). (.2).0 (.197). (.2). (.2). (.2) 7. (.27). (.2). (.2). (.2) 7. (.27) 7. (.27) 7. (.27) 11.0 (.) 7. (.29) 7. (.29) 7. (.29) 7. (.29) 7. (.29) 12.2 (.0) 12.2 (.0) Note:1) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. 2-A >WS2-A). 2) Delivery lead times may vary depending on the product. Contact JS for details..0 (.17). (.19). (.19). (.2) 2.0 (.079). (.1).1 (.11). (.220) 1.0 (.09) 1.7 (.07) 2. (.091). (.1) 0. (.020) 0. (.01) 0. (.01) 1.0 (.09) YH-222 C-01 YH-22 YA- C-01 YH-22 YA- C-01 YH-22 YA- C-01 00

4 SPADE ONGUE (A type) Vinyl-insulated ile No.: E202 R2012 SRAIGH ARED Applicable Wire 2 to 22 (0.2 to 0.) 22 to 1 *(0.2 to 1.) 1 to 1 (1.0 to 2.) 12 to (2. to.) Stud size Part No. American Metric Straight lared Standard - V0.-A V0.-A V0.-.7A V0.-.7A V1.2-2A V1.2-2A - V1.2-A V1.2-A V1.2-CA V1.2-NA V1.2-NA V1.2-YSA V1.2-YSA V1.2-SA V1.2-SA V1.2-PA V1.2-PA V1.2-YSA V1.2-YSA V1.2-SA V1.2-SA V1.2-A V1.2-A V1.2-SA V1.2-SA V1.2-MA V1.2-MA V1.2-A V1.2-A 1/ V1.2A V1.2A - V2-NA V2-NA - V2-MA V2-MA V2-YSA V2-YSA V2-SA V2-SA V2-A V2-A V2-YSA V2-YSA V2-YMA V2-YMA V2-SA V2-SA V2-A V2-A V2-MA V2-MA V2-A V2-A 1/ V2-A V2-A V.-SA V.-SA V.-A V.-A V.-SA V.-SA V.-A V.-A V.-A V.-A 1/ V.A V.A /1 V.-A V.-A.2 (.12).0 (.197) 1. (.0).0 (.2).7 (.1). (.22) 19.0 (.7) 7.7 (.0) 2.2 (.07). (.11) 1. (.70). (.19).2 (.12). (.22) 20.0 (.77). (.2).7 (.1). (.220) 20.0 (.77). (.2).7 (.1).2 (.2) 20.0 (.77). (.2).7 (.1). (.22) 19. (.772). (.2).7 (.1) 7.2 (.2) 20.0 (.77). (.2).7 (.1) 7. (.29) 1.0 (.709). (.217). (.19). (.22) 19. (.772). (.2). (.19) 7.2 (.2) 20.0 (.77). (.2). (.19). (.) 20.0 (.77) 7.0 (.27). (.209) 7.2 (.2) 20.0 (.77). (.2). (.209). (.) 20.0 (.77) 7.0 (.27). (.209) 9. (.7) 20.0 (.77) 7.0 (.27). (.22) 12.0 (.72) 2.2 (1.02) 11.0 (.).2 (.12).9 (.22) 20.0 (.77). (.2).2 (.12).0 (.2) 1.7 (.7).0 (.197).7 (.1). (.22) 19. (.772). (.2).7 (.1) 7.2 (.2) 20.2 (.79). (.2).7 (.1). (.) 21.0 (.27) 7. (.27). (.19). (.22) 19. (.772). (.2). (.19). (.2) 19. (.772). (.2). (.19) 7.2 (.2) 20.2 (.79). (.2). (.19). (.) 21.0 (.27) 7. (.27). (.209). (.) 21.0 (.27) 7. (.27). (.209) 9. (.7) 21.0 (.27) 7. (.27). (.22) 12.0 (.72) 2.2 (1.02) 11.0 (.).7 (.1) 7.2 (.2) 2.2 (1.02) 7. (.29).7 (.1) 9. (.7) 2.2 (1.02) 7. (.29). (.19). (.) 2.2 (1.02) 7. (.29). (.19) 9. (.7) 2.2 (1.02) 7. (.29). (.209) 9. (.7) 2.2 (1.02) 7. (.29). (.22) 1 (.2) 2.2 (1.2) 12.2 (.0). (.1) 1 (.2) 2.2 (1.2) 12.2 (.0) Note:1) *he crimping will be more secure if the total cross-sectional area of the wire is at least 0. mm 2. Examples: If the cross-sectional area of the wire is 0.mm 2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.mm 2, crimp the terminal onto the wire as it is. 2) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. V2-A >VWS2-A). ) o order products with nylon insulation, change the "V" in the part number prefix to "N" (ex. V2-A >N2-A). ecause nylon absorbs moisture, care must be taken concering storage. ) Delivery lead times may vary depending on the product. Contact JS for details..0 (.1) 9.0 (.) 9.0 (.) 1 (.1) ø D Str. ld. 1.9 (.07).2 (.12).9 (.1). (.21) 2.9 (.11).0 (.17). (.177). (.2) 0. (.020) 0. (.01) 0. (.01) 1.0 (.09) Color Yellow Red lue Yellow ool No. YN-222, C-01 YN-221 YA- C-01 YN-11 YA- C-01 YN-12S YA- C-01 Qty/box 00

5 SPADE ONGUE (A type) Vinyl-insulated (funnel-entry) ile No.: E202 R2012 Applicable Wire 22 to 1 *(0.2 to 1.) 1 to 1 (1.0 to 2.) 12 to (2. to.) Stud size American Metric - 1/ - - 1/ 1/ /1 Part No. Standard ø D Color ool No. Qty/box VX1.2-A.2 (.12). (.22) 21. (.). (.2) VX1.2-NA.7 (.1).2 (.2) 21. (.). (.2) VX1.2-YSA.7 (.1). (.22) 21. (.). (.2) VX1.2-SA.7 (.1) 7.2 (.2) 21. (.). (.2) VX1.2-PA.7 (.1) 7. (.29) 21. (.). (.217) YN-221 VX1.2-YSA. (.19). (.22) 21. (.). (.2) Red VX1.2-SA. (.19) 7.2 (.2) 21. (.). (.2) (.2) (.17) (.01) YA- VX1.2-A. (.19). (.) 21. (.) 7.0 (.27) C-01 VX1.2-SA. (.209) 7.2 (.2) 21. (.). (.2) VX1.2-MA. (.209). (.) 21. (.) 7.0 (.27) VX1.2-A. (.209) 9. (.7) 21. (.) 7.0 (.27) VX1.2A. (.22) 12.0 (.72) 2.0 (1.2) 11.0 (.) VX2-NA.2 (.12).9 (.22) 21. (.). (.2) VX2-MA.2 (.12).0 (.2) 20. (.07).0 (.197) VX2-YSA.7 (.1). (.22) 21. (.). (.2) VX2-SA.7 (.1) 7.2 (.2) 2.0 (.90). (.2) C-01 VX2-A.7 (.1). (.) 22. (.9) 7. (.27) YN-11 VX2-YSA. (.19). (.22) 21. (.). (.2).. 0. lue VX2-YMA. (.19). (.2) 21. (.). (.2) (.2) (.11) (.01) VX2-SA. (.19) 7.2 (.2) 2.0 (.90). (.2) YA- C-01 VX2-A. (.19). (.) 22. (.9) 7. (.27) VX2-MA. (.209). (.) 22. (.9) 7. (.27) VX2-A. (.209) 9. (.7) 22. (.9) 7. (.27) VX2-A. (.22) 12.0 (.72) 2.0 (1.2) 11.0 (.) 00 VX.-SA.7 (.1) 7.2 (.2) 2.7 (1.01) 7. (.29) VX.-A.7 (.1) 9. (.7) 2.7 (1.01) 7. (.29) VX.-SA. (.19). (.) 2.7 (1.01) 7. (.29) YN-12S VX.-A. (.19) 9. (.7) 2.7 (1.01) 7. (.29) Yellow YA- (.1) (.2) (.09) VX.-A. (.209) 9. (.7) 2.7 (1.01) 7. (.29) C-01 VX.A. (.22) 1 (.2) 2.7 (1.27) 12.2 (.0) VX.-A. (.1) 1 (.2) 2.7 (1.27) 12.2 (.0) 20 Note:1) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. VX2-A >VXWS2-A). 2) *he crimping will be more secure if the total cross-sectional area of the wire is at least 0. mm 2. Examples: If the cross-sectional area of the wire is 0.mm 2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.mm 2, crimp the terminal onto the wire as it is. ) Delivery lead times may vary depending on the product. Contact JS for details.

6 SPADE ONGUE (A type) Vinyl-insulated (funnel-entry) ile No.: E202 R2012 Applicable Wire 22 to 1 *(0.2 to 1.) 1 to 1 (1.0 to 2.) 12 to (2. to.) Stud size American Metric / - - 1/ 1/ /1 2 Part No. Standard ø D Color ool No. Qty/box V1.2-2A 2.2 (.07). (.11) 19.2 (.7). (.19) V1.2-A.2 (.12). (.22) 20. (.0). (.2) V1.2-NA.7 (.1).2 (.2) 20. (.0). (.2) V1.2-YSA.7 (.1). (.22) 20.0 (.77). (.2) V1.2-SA.7 (.1) 7.2 (.2) 20. (.0). (.2) YN-221 V1.2-PA.7 (.1) 7. (.29) 1. (.72). (.217) V1.2-YSA. (.19). (.22) 20.0 (.77). (.2) Red (.70) (.1) (.01) V1.2-SA. (.19) 7.2 (.2) 20. (.0). (.2) YA- C-01 V1.2-A. (.19). (.) 20. (.0) 7.0 (.27) V1.2-MA. (.209). (.) 20. (.0) 7.0 (.27) V1.2-A. (.209) 9. (.7) 20. (.0) 7.0 (.27) V1.2-SA. (.209) 7.2 (.2) 20. (.0). (.2) V1.2A. (.22) 12.0 (.72) 2. (1.07) 11.0 (.) V2-NA.2 (.12).9 (.22) 20. (.0). (.2) V2-MA.2 (.12).0 (.2) 19.1 (.72).0 (.197) V2-YSA.7 (.1). (.22) 20.0 (.77). (.2) V2-SA.7 (.1) 7.2 (.2) 20. (.11). (.2) V2-A.7 (.1). (.) 21. (.) 7. (.27) YN-11 V2-YSA. (.19). (.22) 20.0 (.77). (.2) lue V2-YMA. (.19). (.2) 20.0 (.77). (.2) (.70) (.1) (.01) YA- V2-SA. (.19) 7.2 (.2) 20. (.11). (.2) C-01 V2-A. (.19). (.) 21. (.) 7. (.27) V2-MA. (.209). (.) 21. (.) 7. (.27) V2-A. (.209) 9. (.7) 21. (.) 7. (.27) V2-A. (.22) 12.0 (.72) 2. (1.07) 11.0 (.) V.-SA.7 (.1) 7.2 (.2) 2. (1.0) 7. (.29) V.-A.7 (.1) 9. (.7) 2. (1.0) 7. (.29) V.-SA. (.19). (.) 2. (1.0) 7. (.29) YN-12S V.-A. (.19) 9. (.7) 2. (1.0) 7. (.29) Yellow YA- (.) (.27) (.09) V.-A. (.209) 9. (.7) 2. (1.0) 7. (.29) C V.A. (.22) 1 (.2) 2. (1.20) 12.2 (.0) V.-A. (.1) 1 (.2) 2. (1.20) 12.2 (.0) Note:1) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. V2-A >VWS2-A). 2) *he crimping will be more secure if the total cross-sectional area of the wire is at least 0. mm 2. Examples: If the cross-sectional area of the wire is 0.mm 2, fold the wire in two when crimping the terminal. If the cross-sectional area of the wire is 0.mm 2, crimp the terminal onto the wire as it is. ) Delivery lead times may vary depending on the product. Contact JS for details. 7

7 SPADE ONGUE (A type) Vinyl-insulated with copper sleeve D D ile No.: E202 R2012 SRAIGH ARED Applicable Wire Stud size Part No. Standard American Metric Straight lared - VD0.-A.2 (.12).0 (.197) 1. (.0).0 (.2) 2 to 22 VD0.-.7A.7 (.1). (.22) 19.0 (.7) 7.7 (.0) (0.2 to 0.) - VD0.-A.2 (.12).0 (.197) 1. (.1).0 (.2) VD0.-.7A.7 (.1). (.22) 19. (.70) 7.7 (.0) VD1.2-2A VD1.2-2A 2.2 (.07). (.11) 19. (.7). (.19) - VD1.2-A VD1.2-A.2 (.12). (.22) 20. (.11). (.2) VD1.2-NA VD1.2-NA.7 (.1).2 (.2) 20. (.11). (.2) VD1.2-YSA VD1.2-YSA.7 (.1). (.22) 20.2 (.79). (.2) VD1.2-SA VD1.2-SA.7 (.1) 7.2 (.2) 20. (.11). (.2) 22 to 1 VD1.2-PA VD1.2-PA.7 (.1) 7. (.29) 1. (.72). (.217) (0.2 to VD1.2-YSA VD1.2-YSA. (.19). (.22) 20.2 (.79). (.2) 1.) VD1.2-SA VD1.2-SA. (.19) 7.2 (.2) 20. (.11). (.2) VD1.2-A VD1.2-A. (.19). (.) 20. (.11) 7.0 (.27) VD1.2-SA VD1.2-SA. (.209) 7.2 (.2) 20. (.11). (.2) VD1.2-MA VD1.2-MA. (.209). (.) 20. (.11) 7.0 (.27) VD1.2-A VD1.2-A. (.209) 9. (.7) 20. (.11) 7.0 (.27) 1/ VD1.2A VD1.2A. (.22) 12.0 (.72) 2.(1.0) 11.0 (.) - VD2-NA VD2-NA.2 (.12).9 (.22) 20. (.11). (.2) - VD2-MA VD2-MA.2 (.12).0 (.2) 19. (.70).0 (.197) VD2-YSA VD2-YSA.7 (.1). (.22) 20.2 (.79). (.2) VD2-SA VD2-SA.7 (.1) 7.2 (.2) 20. (.19). (.2) VD2-A VD2-A.7 (.1). (.) 21. (.0) 7. (.27) 1 to 1 VD2-YSA VD2-YSA. (.19). (.22) 20.2 (.79). (.2) (1.0 to 2.) VD2-YMA VD2-YMA. (.19). (.2) 20.2 (.79). (.2) VD2-SA VD2-SA. (.19) 7.2 (.2) 20. (.19). (.2) VD2-A VD2-A. (.19). (.) 21. (.0) 7. (.27) VD2-MA VD2-MA. (.209). (.) 21. (.0) 7. (.27) VD2-A VD2-A. (.209) 9. (.7) 21. (.0) 7. (.27) 1/ VD2-A VD2-A. (.22) 12.0 (.72) 2.(1.0) 11.0 (.) VD.-SA VD.-SA.7 (.1) 7.2 (.2) 2.7(1.01) 7. (.29) VD.-A VD.-A.7 (.1) 9. (.7) 2.7(1.01) 7. (.29) 12 to VD.-SA VD.-SA. (.19). (.) 2.7(1.01) 7. (.29) (2. to VD.-A VD.-A. (.19) 9. (.7) 2.7(1.01) 7. (.29).) VD.-A VD.-A. (.209) 9. (.7) 2.7(1.01) 7. (.29) 1/ VD.A VD.A. (.22) 1 (.2) 2.7(1.27) 12.2 (.0) /1 VD.-A VD.-A. (.1) 1 (.2) 2.7(1.27) 12.2 (.0) Note:1) he part numbers indicated in the above table are for products with a brazed seam. When ordering products with a butted seam, add the prefix "WS" to the part number (ex. VD2-A >VDWS2-A). 2) o order products with nylon insulation, change the "V" in the part number prefix to "N" (ex. VD2-A >ND2-A). ecause nylon absorbs moisture, care must be taken concering storage. ) Delivery lead times may vary depending on the product. Contact JS for details..0 (.1). (.27) 9. (.7) 9. (.7) 1.0 (.1) ø D Str. ld. 2.2 (.07) (.1).1 (.11).7 (.22) 2. (.09).0 (.17).7 (.1). (.2) 0. (.020) 0. (.01) 0. (.01) 1.0 (.09) Color Yellow Red lue Yellow ool No. YN-222, C-01 YN-221 YA- C-01 YN-11 YA- C-01 YN-12S YA- C-01 Qty/box 00

8 MCEW 112 Series Cable & Wire eatures: 1211AWG (2/0.2mm) inned Copper. Heat Resisting PVC Insulated. Specifications: Conductors: 1AWG (2/0.2mm) inned Annealed Copper unch. Minimum Cross-Sectional Area : 1.2mm 2. Insulation: PVC Compound Meeting the Requirement of Class PVC and Class 2. Minimum hickness at any One Point : 0.9mm. Minimum Average hickness : 0.7mm. Nominal Overall Diameter :.12mm. ay Up : Not Applicable. Screen : Not Applicable. Sheath : Not Applicable. Part Number able Description Wire, 2/0 lack 0M Wire, 2/0 lue 0M Wire, 2/0 rown 0M Wire, 2/0 Red 0M Wire, 2/0 lack 12.M Wire, 2/0 Red 12.M Wire, 2/0 White 12.M Part Number MCEW 112 K MCEW 112 U MCEW 112 RN MCEW 112 RED MCEW 112 K MCEW 112 RED MCEW 112 WH Page 1 /0/0 V1.0

9 MCEW 112 Series Cable & Wire Notes: International Sales Offices: AUSRAIA arnell InOne el No: ax No: INAND arnell InOne el No: ax No: NEHERANDS arnell InOne el No: ax No: SWIZERAND arnell InOne el No: ax No: AUSRIA arnell InOne RANCE arnell InOne NEW ZEAAND arnell InOne UK arnell InOne el No: el No: el No: el No: ax No: ax No: ax No: ax No: EGIUM arnell InOne GERMANY arnell InOne NORWAY arnell InOne UK uckhickman InOne el No: el No: el No: ax No: ax No: ax No: RAZI arnell-newark InOne el No: ax No: HONG KONG arnell-newark InOne el No: ax No: PORUGA arnell InOne el No: ax No: UK CPC CHINA arnell-newark InOne el No: ax No: IREAND arnell InOne el No: ax No: SINGAPORE arnell-newark InOne el No: ax No: export EXPOR arnell InOne el No: ax No: or enquiries from all other markets DENMARK arnell InOne IAY arnell InOne SPAIN arnell InOne el No: ++ el No: el No: ax No: ++ 0 ax No: ax No: ESONIA arnell InOne el No: ax No: MAAYSIA arnell-newark InOne el No: ax No: SWEDEN arnell InOne el No: ax No: Disclaimer his data sheet and its contents (the "Information") belong to the Premier arnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. he Information is subject to change without notice and replaces all data sheets previously supplied. he Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. iability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. his will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Pro-Power is the registered trademark of the Group. Premier arnell plc 200. Page 2 /0/0 V1.0