Work Experience Pack. Prepared by LMP Architectural Consultants. LMP Architectural Consultants Work Experience Pack
|
|
|
- Julian Mason
- 6 years ago
- Views:
Transcription
1 Prepared by 1
2 1.0 Exercise 1 Freehand Trace In this exercise you will learn the basics of using a traditional drawing board, technical pens and the set square. You will require the following materials & equipment; Exercise 1 Freehand Trace drawing Tracing paper Technical pen Set square To commence, the Exercise 1 Freehand Trace drawing is to be placed and levelled on the drawing board using the straight edge. The drawing is then to be secured in place by tape with the tracing paper placed and taped above. Using the technical pen the drawing is to be traced with straight lined created using the set square if you wish. Once the trace is complete the drawing is to be copied onto paper using the large format printer & scanner to generate a finalised drawing. 2
3 2.0 Exercise 2 Technical Trace In this exercise you will trace a technical drawing using the set square to create a precise and accurate drawing. Exercise 2 Technical Trace drawing Tracing paper Technical pen Set square To commence, the Exercise 2 Technical Trace drawing is to be placed and levelled on the drawing board using the straight edge. The drawing is then to be secured in place by tape with the tracing paper placed and taped above. Using the technical pen and the set square you are to carefully and accurately trace the drawing to create a new technical drawing. Any notes and titles on the drawing are also to be copied to complete the drawing. 3
4 3.0 Exercise 3 Drawing a Survey In this exercise you will be introduced to surveying (drawing an existing building) and AutoCAD drawing software. Exercise 3 Drawing a Survey notes Computer with AutoCAD software installed Using the Exercise 3 Drawing a Survey notes, and following a basic tutorial in AutoCAD, the floor plans and elevations of the existing building are to be drawn alongside all relevant notes and titles. The drawing is to be finalised with a drawing sheet and completed title block. An example AutoCAD file will be provided for support. 4
5 4.0 Exercise 4 Sketch Proposals With the requirements of the clients provided, you are to produce sketch proposals for an extension to the existing dwelling that you had drawn in the previous exercise. Tracing paper Technical pencil Technical pen Set square The proposals are to be drawn to scale on tracing paper (using the printed survey as an underlay) with multiple ideas and sketches created for the clients consideration. The drawing is to be finalised with a drawing sheet and completed title block. All appropriate notes and titles are to be included to complete the drawing. 5
6 5.0 Exercise 5 Finalised Proposal With the sketch proposals refined, the preferred proposals are to be produced in AutoCAD to a planning drawing standard. Exercise 4 Sketch Proposals drawings Computer with AutoCAD software installed The drawing is to be finalised with a drawing sheet and completed title block. All appropriate notes and titles are to be included to complete the drawing. 6
7 6.0 Exercise 6 3D Model In this exercise you will be introduced to 3D modelling. Following a basic tutorial, the finalised proposals completed in the previous exercise are to be modelled in Sketchup. Exercise 5 Finalised Proposal drawing Computer with Sketchup & AutoCAD software installed Only the external façades of the building are to be modelled to produce images that will allow the client to visualise the completed design. 7
THE DESIGN PROCESS. for an interior design project
THE DESIGN PROCESS for an interior design project STAGE 1 Preliminary meeting The client brief The business proposal and client s agreement to proposal THE DESIGN PROCESS for an interior design project
How to Draw a Rose Flower
How to Draw a Rose Flower Easy Fast Have you ever wanted to be able to draw a beautiful rose? This easy step-by-step drawing tutorial outlines the steps necessary to draw a cartoon style rose, complete
Environmental Design. Floor Plan. Planometric Drawing. Target Audience. Media. Materials
Environmental Design The design of large-scale aspects of the environment by means of architecture, interior design, way-finding, landscape architecture, etc. Floor Plan A scale diagram of the arrangement
Step By Step Feathers
Step By Step Feathers Getting Started You may be used to other terms to describe feathers and feather parts, but in order to standardize my instructions, I m going to use some specific terms. Freehand
Drafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
ARCH 2000: Visual Thinking A
Calendar Description Fall 2015 Class Time: Friday, 2:00pm to 5:00pm Room: D414 MacDonald Building, Sexton Campus Course Instructor: Ken Kam Course T.A.: TBA Office: HA-15 (Ralph M. Medjuck Building) Contact:
ARCHITECTURAL DESIGN (542)
DESCRIPTION This is the first assessment in a sequence, Architectural Design I prepares students with knowledge of residential architectural and related construction. Topics include; architectural blueprint
Content Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
Desk Organizer Project
Desk Organizer Project PROBLEM STATEMENT: Keeping an office desk from becoming cluttered with papers and items such as pens, pencils, staplers, paper clips, Post-It Notes, and writing pads is a never-ending
Box Track INSTALLATION INSTRUCTIONS
Box Track INSTALLATION INSTRUCTIONS BOX TRACK Recommended Tools Level Tape Measure Pencil Drill with 1/8, and 1/4, Drill Bits, Phillips Bit and Slotted Bit Socket Wrench with 9/16 Socket 9/16 and 5/8 Wrench
Design Tool Bag: Adding an ipad Pro to Your Toolset
Design Tool Bag: Adding an ipad Pro to Your Toolset Jim LaPier IMPACT Designs, LLC Join the conversation #AU2016 Class summary With the introduction of the Apple ipad Pro and Apple Pencil, an incredibly
Develop an Interior perspective from a floor plan using 2 points. using orthographic projection techniques
Develop an Interior perspective from a floor plan using 2 points using orthographic projection techniques Obtain a floor of the space to be drawn Digital or hand drawn plan Plan must be to scale Often
Residential Design Using AutoCAD 2018
Daniel John Stine CSI, CDT Residential Design Using AutoCAD 2018 Includes video instruction SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com ACCESS CODE UNIQUE CODE INSIDE
A step by step guide to recording a building
BUCKINGHAMSHIRE ARCHAEOLOGICAL SOCIETY HISTORIC BUILDINGS GROUP A step by step guide to recording a building First, the essential safety bit! Never work alone (unless you are surveying your own house!)
Strengthened Technical-Vocational Education Program COURSE DESIGN
COURSE DESIGN COURSE TITLE : DRAFTING TECHNOLOGY NOMINAL DURATION : 1200 HOURS QUALIFICATION LEVEL : NC II COURSE DESCRIPTION : This course is designed to enhance the knowledge, skills, and positive attitudes
UNIT 2: GEOMETRY CONSTRUCTION PROJECT Due Date: November 1 st (Red) and 2 nd (Gray)
UNIT 2: GEOMETRY CONSTRUCTION PROJECT Due Date: November 1 st (Red) and 2 nd (Gray) Expectations: Choose one of the designs from the attached pages. Figure out what must be done to duplicate those designs.
1 classroom hour, 2 lab/studio hours, 2 credits
VISUAL STUDIES I 1 classroom hour, 2 lab/studio hours, 2 credits Course Description: Visual Studies I is taken in tandem with ARCH 1110: Architectural Design I: Foundations to introduce the language of
TRADITIONAL SKETCH RENDERING
TRADITIONAL SKETCH RENDERING www.lugnegarddesign.com I will begin by introducing myself. My name is Mikael Lugnegård and I'm a Swedish designer, currently working in the automotive industry. I'm 27 years
WAYNESBORO AREA SCHOOL DISTRICT CURRICULUM INTRODUCTION TO ENGINEERING
UNIT: Classroom rules and procedures NO. OF DAYS: 2 KEY LEARNING(S): Expectations and classroom procedures UNIT : What are the expectations and classroom procedures in the CAD room 3.4.12.A3. Demonstrate
Build and Explore with Geocadabra
Build and Explore with Geocadabra Task : How to use the Geocadabra Construction Box. When you activate the software, you see a screen like this Click on Basic application. Click on Lower for the User level
64 X 64 BLOCK REPEAT
64 X 64 BLOCK REPEAT Here are instructions for creating a 64cm x 64cm Block Repeat design, commonly a repeat dimension used for furnishing repeats. In this instance we will be using the fashion sized repeat
DRAWING / DIAGRAMMING Intro to graphic communication (why we draw)
DRAWING / DIAGRAMMING Intro to graphic communication (why we draw) Marcel Breuer, Cape Cod Cottage Architects communicate visually, using drawings and graphics 1 Drawing is the language of architects.architects
Exercise DrE-5. Plan. AutoCAD History, Basic concepts, Edit&View. Prof Ahmed Kovacevic
Engineering Drawing and Design ME 1110 Engineering Practice 1 Lecture 8 AutoCAD History, Basic concepts, Edit&View Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room CG08, Phone:
Problem solving Grade 4 GCSE 9-1
Write your name here Surname Other names AQA Edexcel Level 1/Level 2 GCSE (9-1) Centre Number Candidate Number Problem solving Grade 4 GCSE 9-1 www.themathsprofessor.com Higher Tier Paper Reference Time:
Scanning Various Hand Drawn Graphics
Tutorial Created by Brijesh Bhatha, 2004. Updated 2006 by Corinne Stewart (corinnestewart@gmail.com) GRAPHICS TUTORIAL # C1 CP-208 Plan Preparation Studio - Prof. Elizabeth Macdonald 2 Besides making drawings
How to Draw with a Grid
Level: Beginner Flesch-Kincaid Grade Level: 8.3 Flesch-Kincaid Reading Ease: 67.5-6 Pages and 12 Illustrations How to Draw with a Grid Exploring the grid method to draw accurate outline drawings This resource
How to Draw Bob the Minion
How to Draw Bob the Minion Easy Fast Sunflowers are symbols of happiness and vitality. They have graced gardens for over 1,000 years, and images of sunflowers are often found in ancient art, especially
U C L A E X T E N S I O N ARCHITECTURE & INTERIOR DESIGN PROGRAMS
U C L A E X T E N S I O N ARCHITECTURE & INTERIOR DESIGN PROGRAMS DESIGN COMMUNICATION II FALL 2011 Instructor: David Alvarez david@studioalvarez.com Materials List: (Needed) Black Felt Tip Pens: Pilot
Paper Reference. Mathematics (Linear) 1380 Papers 3 and 4 Locus and Constructions Past Paper Questions Arranged by Topic
Centre No. Candidate No. Paper Reference 1 3 8 0 4 H Surname Signature Paper Reference(s) 1380/4H Edexcel GCSE Mathematics (Linear) 1380 Papers 3 and 4 Locus and Constructions Past Paper Questions rranged
LECTURE 1 INRTRODUCTION TO CIVIL ENGINEERING DRAWING. Engr. Ali Raza Khalid Civil Engineering drawing
LECTURE 1 INRTRODUCTION TO CIVIL ENGINEERING DRAWING Engr. Ali Raza Khalid CIVIL ENGINEERING DRAWING COURSE OUTLINE Credit Hours: 2+2= 4 Introduction: Introduction to the subject and drawing equipment.
Folding Activity 1. Colored paper Tape or glue stick
Folding Activity 1 We ll do this first activity as a class, and I will model the steps with the document camera. Part 1 You ll need: Patty paper Ruler Sharpie Colored paper Tape or glue stick As you do
1: Assemblage & Hierarchy
What: 1: Assemblage & Hierarchy 2 compositional sequences o abstract, line compositions based on a 9 square grid o one symmetrical o one asymmetrical Step 1: Collage Step 2: Additional lines Step 3: Hierarchy
How to fit an Internal Door
How to fit an Internal Door How to fit an Internal Door The following instructions are for installing a internal door only. If you have any queries please contact Cheshire Mouldings technical helpline
Problem solving Grade 4 GCSE 9-1
Write your name here Surname Other names AQA Edexcel Level 1/Level 2 GCSE (9-1) Centre Number Candidate Number Problem solving Grade 4 GCSE 9-1 www.themathsprofessor.com Higher Tier Paper Reference Time:
UNIT 1 SIMILARITY, CONGRUENCE, AND PROOFS Lesson 2: Constructing Lines, Segments, and Angles Instruction
Prerequisite Skills This lesson requires the use of the following skills: using a compass understanding the geometry terms line, segment, ray, and angle Introduction Two basic instruments used in geometry
21 st Century Skills. conceptualize and sketch a scaled drawing of an object that has some everyday use.
OVERVIEW Students will use geometric shapes to design a unique three-dimensional object that has an everyday use. Students will first sketch a scaled drawing of the object by hand. Then, they will design
Heavy Duty I-Beam Trolley
Heavy Duty I-Beam Trolley ASSEMBLY INSTRUCTIONS I-BEAM TROLLEY Recommended Tools Level Tape Measure Pencil Drill with 1/8, 1/4, and 3/8, Drill Bits and Phillips Bit Socket Wrench with 9/16 Socket I-BEAM
CAD Tutorial 24: Step by Step Guide
CAD TUTORIAL 24: Step by step CAD Tutorial 24: Step by Step Guide Level of Difficulty Time Approximately 40 50 minutes Lesson Objectives To understand the basic tools used in SketchUp. To understand the
READING ARCHITECTURAL PLANS
READING ARCHITECTURAL PLANS ARCHITECTURAL DRAWINGS FOR A HOUSE Architectural drawings contain information about the size, shape, and location of all parts of the house ARCHITECTURAL DRAWINGS FOR A HOUSE
DOG ROSE PROJECT Level Beginner
DOG ROSE PROJECT Level Beginner Introduction This project is aimed at the beginner. It is recommended that you get detailed instructions on the technique from either the DVD The Long & The Short Of It
2.000 Sketching Example: Tractor transmission
1. HAVE A PLAN:Look at the transmission from the angle you want to draw it from choose an angle that will show the most information. Here we choose to draw an oblique sketch for clarity and simplicity.
Parchment Craft Design Step-by-Step Tutorial - Best Wishes Wendy Walters. Traditional White Work Sample This design incorporates traditional style tracing with mapping pen white ink and grid work also
Communicating Ideas by Sketching
Communicating Ideas by Sketching Designers communicate their thoughts through sketches, which allow their CLIENT to visualize what the design will look like. This could be line drawings and freehand sketches
Edexcel GCSE Mathematics Paper 3 (Non-Calculator) Higher Tier Specimen paper Time: 1 hour and 45 minutes
Centre No. Paper Reference Surname Initial(s) Candidate No. Signature Paper Reference(s) Edexcel GCSE Mathematics Paper 3 (Non-Calculator) Higher Tier Specimen paper Time: 1 hour and 45 minutes Examiner
Drawing Geometric Designs: From Hand Sketch to Digital Pattern
PROJECT GUIDE Unit 1: But I Hate Geometry! 1. Find your inspiration and reference material Think back on any memories that involve patterns Look at patterns from other cultures You can be inspired by my
Polyboard 6 WOOD. new features. designer
Polyboard 6 new features WOOD designer Legal Disclaimers All contents copyright 2016 Wood Designer Ltd. All rights reserved worldwide. No part of this document should be reproduced, transmitted or distributed
SKILL BUILDING. Learn techniques helpful in building prototypes. Introduction 02 Prototyping. Lesson plans 03 Prototyping skills
SKILL BUILDING Learn techniques helpful in building prototypes. Introduction 02 Prototyping Lesson plans 03 Prototyping skills Resources 11 Skills stations Introduction 2 DID YOU KNOW? Prototyping is the
Year 13 - DVC NCEA LEVEL 3 Course Outline 2017 Technology Dept. Huntly College
Year 13 - DVC NCEA LEVEL 3 Course Outline 2017 Technology Dept. Huntly College What is Design and Visual Communication? The term 'visual presentation' is used to refer to the actual presentation of information
Developing Design Ideas
Modelling It is often difficult to imagine what a design idea will look like or how it will work. Modelling your design ideas gives you something to look at, think about and test. Modelling will help you:
Virtual Reality & Real-Time Simulation. Animation. 3D Stereoscopy
tec3d Visualisation Virtual Reality & Real-Time Simulation tec3d Ltd produce 3D real-time or Virtual Reality simulations which allow the user to freely explore 3D virtual worlds through a first-person
TIGRESS BLOCK by Lone J. Minkkinen
TIGRESS BLOCK by Lone J. Minkkinen Finished block size 9½" x 15" Instructions are for one raw-edge, fused quilt-liqué block. This block is fused and cut before stitching. Queen of India, 17¼" x 22½", by
BASICS: NOT SO BASIC BASICS
BASICS: Richard L. Yepez and Kathleen E. Yepez An Art Skills Tutorial Commissioned by the Center for Science Education Research at the University of Texas at Dallas Copyright 2005-2006 by Richard L. Yepez
Isometric Drawing Paper Print Out
ISOMETRIC DRAWING PAPER PRINT OUT PDF - Are you looking for isometric drawing paper print out Books? Now, you will be happy that at this time isometric drawing paper print out PDF is available at our online
BCN 1251C Construction Drawing Section: Credits Spring 2016
BCN 1251C Construction Drawing Section: 5889 3 Credits Spring 2016 Meeting Location: RNK210 Meeting Time: T, R 8-9 Periods Instructor: Yuanxin 'Alex' Zhang Logan K. To Ph.D. Candidate Office: RNK324 Office:
3D Scanning Services Information. With Hayles & Howe By K Lawrence CAD Technician
3D Scanning Services Information 2017 With Hayles & Howe By K Lawrence CAD Technician 1 Summary Faro Laser Scanner Focus 3D X 130 HDR With the use of a 3D laser scanner you can capture any environment
Spectrum Design. Materials need for the project:
Spectrum Design IDEA: This painting project is a good follow up to color chart 1. By using the chromatic scale and mixing all the colors in a 12 color scale, the student can create a composition using
Make it Real CAD Engineering Challenge
Make it Real CAD Engineering Challenge Coach Hosaka Harry Daniel Eric Christopher Connor Nolan Victor Alexander John I am Christopher and I have designed a system of two parts to help with wire management.
Your home is full of opportunities to explore maths Build his or her self-confidence and understanding of mathematical ideas. "talk maths" Being able
Mrs Horsnell Your home is full of opportunities to explore maths Build his or her self-confidence and understanding of mathematical ideas. "talk maths" Being able to describe mathematical patterns and
Orthographic Drawing (Architectural Board Drafting)
Design and Drafting Description In this activity, the teacher will introduce orthographic projection, in which a multi-view drawing shows how the sides of an object are related to each another. Students
AUTOCAD 2D TUTORIALS FOR CIVIL ENGINEERS
page 1 / 5 page 2 / 5 autocad 2d tutorials for pdf What is the difference between AutoCAD, Inventor, and Fusion 360? AutoCAD is desktop-based design, drawing, drafting, and modeling software widely used
Manual Sketching Exercises For Cad
Manual Sketching Exercises For Cad If searching for a book Manual sketching exercises for cad in pdf format, then you've come to right website. We furnish the complete edition of this ebook in epub, txt,
Lesson 3- Create a Circuit
Lesson 3- Create a Circuit E-Textiles in the Elementary Classroom STANDARDS PURPOSE Students will create a parallel circuit using conductive thread and become familiar with positive and negative leads
GCSE Mathematics (Non-calculator Paper)
Centre Number Surname Other Names Candidate Number For Examiner s Use Examiner s Initials Candidate Signature GCSE Mathematics (Non-calculator Paper) Practice Paper Style Questions Topic: Loci & Constructions
Teaching Sketching in D&T
Teaching Sketching in D&T (a neat little collection of thoughts and ideas..!) Mark Wemyss-Holden Director (and teacher) The Drawing Tool Company Ltd. Digital technology is incredible. It s the future,
Interior Design Associate in Applied Science Degree (A.A.S.)
Berkeley College Overview Academic Programs Admissions and Finances Administration, Faculty, and Staff Contact Us Interior Design Associate in Applied Science Degree (A.A.S.) Course Requirements MAJOR
HERE, KITTY KITTY Stitchery Pattern
HERE, KITTY KITTY Stitchery Pattern This is a free pattern provided by The Red Boot Quilt Company 2017 STRICTLY NOT FOR RESALE OR DISTRIBUTION The Red Boot Quilt Company The Red Boot Quilt Company HERE,
ACAD-BAU TUTORIAL For BricsCAD platform
ACAD-BAU TUTORIAL WWW.ARHINOVA.SI For BricsCAD platform August 06 WORKSPACE ACAD-BAU RIBBON ACAD-BAU CONTROL BAR F ACAD-BAU PALETTES BASIC SETTINGS Use New command and open the template called ACB_International.DWT.
SolidWorks Tips & Tricks for Industrial Design. SVSWUG April 26 th, 2011
SolidWorks Tips & Tricks for Industrial Design SVSWUG April 26 th, 2011 Overview 1. Sketching like a Pro Perfect Perspective using Basic Volumes & SW Drawings Layer it up for professional looking concept
Straw support Fusion 360
Straw support Fusion 360 Before using these instructions, watch the video screencast of the CAD drawing actually being done in the software. Click this link for video tutorial This design works on a variety
Free Tutorial: 2 Hour Laminated Shower Curtain
Quilters Corner 518 West State Street Ithaca, New York 14850 Authorized PFAFF & Baby Lock sewing machine dealer 607-266-0850 www.e-quilterscorner.com Free Tutorial: 2 Hour Laminated Shower Curtain Before
autocad 2d basics 8396F0FBCAE55CF6CABF6AE8C0C49F7C Autocad 2d Basics 1 / 6
Autocad 2d Basics 1 / 6 2 / 6 3 / 6 Autocad 2d Basics AutoCAD 2D Basics - Tutorial to draw a simple floor plan (Fast and efective!)... Tutorial to draw a simple floor plan (Fast and efective!) PART 1 CAD
Architect. Architect.
The The line line sketch sketch with with modified modified height height for for plinth plinth floor floor is is displayed. displayed. Open Open Architectural Architectural plan plan file, file, which
Project SNEAKY FRACTION QUIZZER
6 SNEAKY MATH: A Graphic Primer with Projects Project SNEAKY FRACTION QUIZZER Make your own Sneaky Fraction Quizzer to practice your fraction calculating skills. (And later, give it away to a young math
HERE, KITTY KITTY Stitchery Pattern
HERE, KITTY KITTY Stitchery Pattern This is a free pattern provided by The Red Boot Quilt Company 2017 STRICTLY NOT FOR RESALE OR DISTRIBUTION The Red Boot Quilt Company www.theredbootquiltcompany.com
BIM Toolbox. User Guide. Version: Copyright 2017 Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES
BIM Toolbox User Guide Version: 2018.0 Copyright 2017 Computer and Design Services Ltd GLOBAL CONSTRUCTION SOFTWARE AND SERVICES Contents Introduction... 1 Create a new project... 2 Trace around a site
701 OCEAN STREET, 4 TH FLOOR, SANTA CRUZ, CA (831) FAX: (831) TDD: (831)
COUNTY OF SANTA CRUZ 701 OCEAN STREET, 4 TH FLOOR, SANTA CRUZ, CA 95060 (831) 454-2580 FAX: (831) 454-2131 TDD: (831) 454-2123 Measuring Your Structure and Drawing Scaled Plans Applications for building
*X033/12/01* X033/12/01 HIGHER STAPLE HERE NATIONAL QUALIFICATIONS. 8 Orthographic drawings are in third angle projection.
Question 2 3 4 Section A Total 7a 7b 8 9 0 EITHER OR 2 Section B Total Total Marks A + B Marks STAPLE HERE FOR OFFICIAL USE 033/2/0 NATIONAL QUALIFICATIONS 204 THURSDAY, 8 MAY.00 PM 4.00 PM GRAPHIC COMMUNICATION
SHELTON THERMOSTATIC SHOWER PANEL
SKU(s): 413241 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the plumbing, floor,
1MA0/1F Edexcel GCSE Mathematics (Linear) 1MA0 Practice Paper 1F (Non-Calculator) Set C Foundation Tier Time: 1 hour 45 minutes
1MA0/1F Edexcel GCSE Mathematics (Linear) 1MA0 Practice Paper 1F (Non-Calculator) Set C Foundation Tier Time: 1 hour 45 minutes Materials required for examination Ruler graduated in centimetres and millimetres,
Building Shapes. Geometry. Objective. Common Core State Standards Talk About It. Solve It. More Ideas. Formative Assessment
2 Objective Building Shapes Giving children the opportunity to combine and take apart shapes helps them build several important mathematical skills. Such activities foster spatial reasoning and spatial
Transfer an Image to Drawing Paper
Level: Beginner to Advanced Flesch-Kincaid Grade Level: 8.4 Flesch-Kincaid Reading Ease: 64.6 Drawspace Curriculum 1.2.A5 6 Pages and 4 Illustrations Transfer an Image to Drawing Paper A three-step process
Triple Bypass System
Triple Bypass System ASSEMBLY INSTRUCTIONS TRIPLE BYPASS SYSTEM Recommended Tools Drill with 1/4 Drill Bit and Phillips Screw Bit 7/16 Combination Wrench Socket Wrench with 7/16 and 9/16 Socket Level Tape
How to Make a Paper Cut-Out Luther Rose by Kelly Klages
How to Make a Paper Cut-Out Luther Rose by Kelly Klages This tutorial will teach you how to cut a traditional, 5-petal Luther rose out of paper, using the paper-folding technique for making a 5-point snowflake
Engineering Drawing. Engineering Drawing TVET FIRST NATED SERIES. Engineering Drawing. Student s Book. NATED Series. M Cameron TVET FIRST NATED SERIES
The TVET First NATED Series offers students and lecturers a wide range of courses, written by lecturers, examiners and subject experts. Troupant/Macmillan have developed brand new books that cover the
technical drawing school of art, design and architecture nust spring 2011
technical drawing school of art, design and architecture nust spring 2011 http://www.youtube.com/watch?v=e55ocgb0l8o t e c h n i c a l d r a w i n g a mean to design reasoning spring 2011 the ability to
Suite Express. Tree Skirt. Designed by Vanessa Stevens using the Suite Christmas collection by RJR Fabrics. Finished skirt measures 50 diameter
Suite Express Tree Skirt Designed by Vanessa Stevens using the Suite Christmas collection by RJR Fabrics Finished skirt measures 50 diameter Suite Express Color Card Suite Christmas fabric collection Fabric
Topic Pulse Modulation. analyse and draw graphs to illustrate the following pulse carrier
Learning Objectives: At the end of this topic you will be able to; analyse and draw graphs to illustrate the following pulse carrier modulation techniques: o Pulse width modulation o Pulse position modulation
Perspective Drawing Skills Packet
Perspective Drawing Skills Packet Source: http://www.studentartguide.com/articles/one-pointperspective-drawing This article contains everything an Art student needs to know about drawing in one point perspective.
How To Paint A LadyBug
How To Paint A LadyBug Copyright 2013 - TheDonTolman.com How To Paint A LadyBug - Copyright 2013 TheDonTolman.com 1 The simple design and bold colors make this ladybug an ideal Ladybug Stone. Success depends
Home for Christmas Hatched and Patched
Finished Size - 7½ x 12¾ (19cmx32.5cm) Fabric Requirements Assorted scraps of red fabrics for strippy background scallops Cream applique background - 8"x11" Applique - SCRAPS of red, beige, brown, yellow,
NAME: PERIOD: DATE: LAB PARTNERS: LAB #6 DRAWING A CONTOUR MAP FROM A THREE DIMENSIONAL MODEL
NAME: PERIOD: DATE: LAB PARTNERS: LAB #6 DRAWING A CONTOUR MAP FROM A THREE DIMENSIONAL MODEL INTRODUCTION Since land distances and elevations on the earth's surface can be very great it is necessary to
TSA Surveying Course
TSA Surveying Course with ProQual Level 3 in Engineering Surveying A block by block outline Preamble The TSA Surveying Course comprises six study periods of two weeks each spread over a period of two years
COLORED PENCIL WITH MIXED MEDIA with Sarah Becktel
COLORED PENCIL WITH MIXED MEDIA with Sarah Becktel SUPPLY LIST Lesson 4: Using Pen and Ink with Colored Pencil Strathmore 400 Series Toned Mixed Media Paper This paper comes in 3 colors: gray, tan, and
CAMELOT FABRICS. 3. Draw a vertical line on the pointed end of each Strap, a tiny bit longer than the diameter of your buttons.
Other Supplies - 2 buttons in coordinating color - paper printer - basic sewing supplies - sewing machine with buttonhole foot - iron & pressing surface - scissors & fabric shears - measuring tape - fabric
2017 Doll Tag Clothing Rebel Bandolier 1
2017 Doll Tag Clothing Rebel Bandolier 1 INDEX Cover Page Page 1 Pattern Information Page 2 Cutting Instructions Page 3 2017 Doll Tag Clothing Rebel Bandolier 2 Bandolier Instructions Page 4-6 Pattern
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education PHYSICS 0625/02
Centre Number Candidate Number Name UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS International General Certificate of Secondary Education PHYSICS 0625/02 Paper 2 Core Candidates answer on the Question
Equipotential Lines and Electric Fields Plotting Equipotential and Electric Field Lines
Plotting Equipotential and Electric Field Lines PURPOSE In this experiment, the concept of electric field will be developed by investigating the space between a pair of electrodes that are connected to
HW1: Personalize Learning Journal (5 pts) Express your personality by customizing the front cover of your Learning Journal. You can draw with gel
HW1: Personalize Learning Journal (5 pts) Express your personality by customizing the front cover of your Learning Journal. You can draw with gel pens, create a collage or glue your personalized doodles
CAELI THERMOSTATIC SHOWER PANEL
SKU(s): 300280 CAELI THERMOSTATIC SHOWER PANEL BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for
Google SketchUp TECHNICAL WORKSHOPS
TECHNICAL WORKSHOPS Outcomes: -A reasonable technical understanding of OS referencing for accurately aligning contours to OS Cad bases -A general understanding of SkecthUp add-ons and their implications/