Paint Scheme Specification
|
|
- Charleen Doyle
- 6 years ago
- Views:
Transcription
1 Paint Scheme Specification All dimensions used are only a guide. Paint shop to determine final dimensions during the paint scheme layout. COPYRIGHT 2016 by Scheme Designers, Inc. - These drawings and paint schemes may only be used for the aircraft shown. Drawings and specifications shall be returned to the owner after the aircraft painting is complete. Reproduction of this scheme on another aircraft requires written permission of Scheme Designers, Inc. Prepared for: January 20, 2016 Aircraft Length Used: Fuselage length (not including pitot tube and thrust attenuator) 21 Broadway, Suite 204 Cresskill, NJ 07626, USA craig@schemedesigners.com
2 Final Specifications Page 1 Dupont Color Chart Green P2547 (dark green leaves and flag) Green Apple M2296 mid green leaves and tail tip) Zorch Green L0695 Brown L0043 (wood grain) Sable Brown P2323 (wood grain) Golden Yellow M1022 (beer) Shell Yellow P6205 (beer) Fire Red P7140 ( Jet Blast text) Gloss Black P2333 Titanium Effect P1219 (if using metallic for base) NOTE: All dimensions listed in this specification are in inches unless otherwise noted. Beer Glass and Foam: White and very light grays. Possibilities: Matterhorn White P6294, First Star White P6286, Gray P6206 OR White Pearl with lightened Metallic Silvers. Gold Metal Rim on beer glass: Bernard likes Green Gold Effect P6208 Possibilities: (John can make best match based on his available paints and approach) Outter Rim: Blends of Golden Yellow M1022, Shell Yellow P6205, and white or very light gray. Inner Rim: Darkened version of Shell Yellow OR Can do the rim with Gold metallic blends Final Paint Scheme Design
3 Final Specifications Page 2 NOTE: The design on the right side of the aircraft is the mirror image of that on the left side. Templates should be used to facilitate the layout from one side to the other. Similar dimensions apply. Right Side View
4 Final Specifications Page 3 1-3/8 LEFT SIDE The pilot name is applied using a paint mask in black. 3/4 RIGHT SIDE The Jet Blast Warning is applied using a paint mask in red. The registration consists of 3 high rounded digits, angled aft on both sides at 15O. The digits are dark green. 30-7/8 5-3/8 The American Flag is applied using a paint mask in dark green. LEFT SIDE RIGHT SIDE The Beer glass and foam is applied using an airbrush artist. Fuselage Graphics
5 Final Specifications Page 4 7-1/2 20-3/4 2-5/ / /2 1-3/8 10-7/8 1-3/8 10-1/2 Nose
6 Final Specifications Page 5 6-3/4 1-1/4 4-1/ /8 5-1/4 The Pilot Name is parallel to the edge of the window line. Mid-Fuselage
7 Final Specifications Page 6 2-1/2 1-1/8 1-1/2 3-3/8 4-7/8 3/8 7-1/4 5-1/4 2-7/8 5-5/8 2-5/8 NOTE: The registration is level in the ground attitude. Rear Fuselage 1-1/4 11-5/8 10-5/8
8 Final Specifications Page 7 1 5/8 11-3/8 2-3/8 2-1/4 1-1/8 13-5/8 14-7/8 Tail 11-1/4
9 Final Specifications Page 8 Plan View
10 Final Specifications Page 9 Dupont Color Chart Shell Yellow P6205 ( Hail to the Ale Plane! text) OR a Gold Metallic. There is no close match from our charts. Lightened version of Titanium Effect P1219 to remain legible over Titanium base (VIRGIL GAMACHE FARMS INC.) 17 Beer: Possible blend of Shell Yellow P6205, Chrome Yellow P2353, and Brown L0043 Bear Glass and Foam: White and very light grays. Possibilities: Matterhorn White P6294, First Star White P6286, Gray P6206 OR White Pearl with lightened Metallic Silvers. 40-7/8 42-3/4 4-3/8 The textual elements are applied using a paint mask. Plan View - Graphics
11 Final Specifications Page /8 22-1/2 19-1/2 1-1/2 20-1/8 1-1/2 Plan View - Wings 9-7/8 19-1/2
12 Final Specifications Page /8 1-3/8 3-1/4 2-1/2 Horizontal Tail
13 Final Specifications Page 12 NOTE: The edges of the black and brown fading stripe on the lower surfaces of the wings and horizontal tail are the mirror images of that on the upper surfaces. The design is symmetrical. Similar dimensions apply. Bottom View
14 Final Specifications Page 13 Dupont Color Chart Shell Yellow P6205 ( Hail to the Ale Plane! text) OR a Gold Metallic. There is no close match from our charts. Lightened version of Titanium Effect P1219 to remain legible over Titanium base (VIRGIL GAMACHE FARMS INC.) Green P2547 Zorch Green L0695 Golden Yellow M1022 Yellow P Shell Yellow P /8 40-7/8 4-3/8 The textual elements are applied using a paint mask. Bottom View Graphics
15 Final Specifications Page 14 The brown stripe is a constant 1-1/2 as it flows across the wing. It fades from brown to silver/gray moving inboard. 7-1/4 25-3/8 20-3/4 7-1/4 19-1/2 1-1/2 1-1/2 19-1/2 The roundels lie 2 from the leading edge of the ailerons. 3-1/2 The brown stripe is a constant 1-1/2 as it flows across the wing. It fades from brown to silver/gray moving inboard. Bottom View 1-1/2 1-1/2
16 Final Specifications Page 15 Specification Notes Dimensions: Dimensions are in inches, unless otherwise specified. When dimensions are specified with the word from, it implies the perpendicular distance from where it is measured. For example, The black stripe starts at a point 1 from the edge of the red stripe implies that the measurement to the starting point of the black stripe is measured perpendicular to the edge of the red stripe. If a vertical distance is being specified, it will be specified as below or above the element from where the measurement is being taken. For example, The black stripe starts at a point 1 below the edge of the red stripe implies that the measurement to the starting point of the black stripe is measured vertically from the red stripe. Similarly, a horizontal measurement (parallel to the ground line) will be specified as forward of or aft of a particular reference. Colors: Colors are referred to throughout the document by a shortened name. For example, an Acry Glo Black Velvet Metallic color is simply referred to as black. The reference to the actual color against the shortened name is provided on Page 1 of the specifications. If a different paint type is being used to that specified on page 1, contact directly to determine an appropriate color match in the brand of paint being used. If there is any reason to suspect an error in a color specification, either in the color name or part number, please contact Scheme Designers, Inc. immediately to verify the color specification. Paint Masks and Vinyl Decals The specifications indicate where paint masks and/or vinyl decals are required. These may be provided by, by other paint masks/vinyl decal manufacturers or made internally by the paint shop. If they are to be ordered from : Contact Craig Barnett at Scheme Designers to Order. Phone: Craig@schemedesigners.com If they are ordered from an alternate source, or made internally: The drawings in the specifications PDF file are scalable. Extract elements to be paint masked or made into a vinyl decal, scale them to the dimensions indicated in the specifications and proceed to cut. Alternately, the overall length of the aircraft is provided on the cover page. The full drawing of the aircraft can be extracted from the PDF file, enlarged to the overall length provided, and then elements to be paint masked or made into decal can be extracted and cut. Questions/Errors While we strive to be as accurate as possible, errors may occur in specifications text or dimensions, or text may be unclear. If an error is found or suspected, or if any item in these specifications is not clearly understood, please call or Craig at immediately to resolve the issue or to obtain an explanation. Specification Notes
17 FLS Microjet N358BV
rcfoamfighters FF-VIPER-50
FOAM, GLUE, TAPE AND A LITTLE IMAGINATION... (RC Model Airplane Construction Plans) rcfoamfighters FF-VIPER-50 (Original Design by Paul Petty ) (PDF Template V1.0- Feb. 2018) THIS IS A FREE PLAN, PERMISSION
More informationFINAL ASSEMBLY- DOORS
- DOORS DRAWING 8XF-5 ASSEMBLY OF THE DOORS CONTENTS SECTIONS #4a DOOR FRAME #4b DOOR GUSSETS & BOTTOM SKIN #4c DOOR LATCH & STOP Helpful building tips: Use a flat, unwrapped piece of plywood for the door
More informationHasegawa 1/48 scale Nakajima B5N2 "Kate" by Dick Smith
Hasegawa 1/48 scale Nakajima B5N2 "Kate" by Dick Smith The release of last summer's motion picture "Pearl Harbor," caused a flood of interest in the modeling world in the Japanese aircraft that took part
More informationCleveland Quickie Luscombe Silvaire
Cleveland Quickie Luscombe Silvaire This plan package is not a 100% copy of the original kit. As you make your way through the instructions you will see the differences. Here s just a few of them: The
More informationEasy Built Models Kit JX-02 MiG-15 Conversion to Rubber-Power By Matt Payne, October 2011
Easy Built Models Kit JX-02 MiG-15 Conversion to Rubber-Power By Matt Payne, October 2011 The fuselage is restructured. The Jetex-related structural components, the stock keel parts, and the formers are
More information6mmFlyRC.com Super Bandit Assembly Instructions
Assembly Instructions Start the assembly with forward fuselage. Lay the two fuselage sides down on a flat surface and glue the foam corner doublers to the locations shown on the plans. Make sure to make
More informationI do hope you build and enjoy a model from this plan package. Paul Bradley
There are several notes I need to provide to aid you with the enclosed package. The original kits used 1/16" balsa. Since I wanted to print these directly on balsa sheet I developed the parts for 1/32"
More informationSERVICE BULLETIN
SERVICE BULLETIN 16-03-28 Date Released: May 6, 2016 (Initial Release) June 2, 2016 (Added Note, pg.11) Date Effective: May 6, 2016 Affected Models: Subject: Required Action: All RV-3, 4, 6/6A, 7/7A, 8/8A,
More informationSTOL CH st Edition 1 st Revision Drawings Summary of changes from Edition 1 to Edition 1 Revision 1.
STOL CH 750 1 st Edition 1 st Revision Drawings Summary of changes from Edition 1 to Edition 1 Revision 1. Page Date Drawing Title 75-G-0 01/10 Three View Drawing 75-G-1 01/10 Drawings Index 75-RX-1 05/09
More informationCENTER WING SECTION (CWS) WORK REPORT
CENTER WING SECTION (CWS) WORK REPORT No. Check Parts / Description Qty PHASE 1: Preparations 1 [ ] 6V1-3 Rear ribs 2R & 2L 1 [ ] L Angle 6 2 [ ] 6V2-1 Rear Ribs.032 2R & 2L 2 [ ] 6V5-1 Gear Rib Doubler
More informationFly Baby Sheet Steel Layouts 5/2/04 Ted Cannaday
Fly Baby Sheet Steel Layouts 5/2/04 Ted Cannaday Within this PDF file are full-size layout drawings for all the.063,.093 and 3/16 fittings for the Fly Baby as shown in Pete Bowers plans book, along with
More informationCompetition Dates: Sunday, March 15, 2015, at 3:00 PM in Arnold Hall Flight Virtual Glider Contest
Aviation and Aerospace - Division 16 Superintendent: Pamela Lopez Assistant Superintendents: Noemy Pascual Robert Tschumy Sean Gallagan Tonya McHugh Tatiyana Brown Registration Deadline: January 20, 2015
More informationFor Fuselage Assembly.
1.Find these Parts First. 2.Take out F11, F12 For Fuselage Assembly. 3.Assemble F13 as below. Do not glue!!! 4.Assemble F4 as below. Do not glue!!! Do not glue!!! 5. Assemble F16 Do not glue!!! 6. Turn
More informationSTOL CH F2-2 Side Skin
7F2-2 Side Skin IMPORTANT: See drawing 7F2-2 to identify the topside of the skin, also clearly mark the side that will be on the inside of the fuselage (if possible choose the side with the manufacture
More informationI do hope you build and enjoy a model from this plan package. Paul Bradley
There are several notes I need to provide to aid you with the enclosed package. The original kits used 1/16" balsa. Since I wanted to print these directly on balsa sheet I developed the parts for 1/32"
More informationDesigned in 2005 by Bernard Burton. Assembly manual Bernard Burton DRAFT 1
Designed in 2005 by Bernard Burton Assembly manual 2005 - Bernard Burton DRAFT 1 The plans can be requested via this link http://www.gundersonaerodesign.com/m12plansreq.htm The laser kit is available here
More informationIMPORTANT - STATE AIRCRAFT REGISTRATION NUMBER IN ALL CORRESPONDENCE MOONEY AIRCRAFT, INC. M-l8 SERVICE LETTER NO.17
IMPORTANT - STATE AIRCRAFT REGISTRATION NUMBER IN ALL CORRESPONDENCE MOONEY AIRCRAFT, INC. M-l8 SERVICE LETTER NO.17 (This Service Letter is FAA. Approved) DATE: OCTOBER 24, 1959 SUBJECT: REAR BULKHEAD
More informationThe Olympic DLG. (Discus launch glider) by Chris Brislin
The Olympic DLG (Discus launch glider) by Chris Brislin 1 Contents Parts List/ What you need 3 Before you begin 4 Wing Construction 5-9 Pod Construction 9-13 Tail assembly 13-? Control linkages 9-10 Finishing
More informationWING ASSEMBLY 23.5 (Continued)
A VERY IMPORTANT NOTE found on many wing drawings states Do not drill any unspecified holes into spar. This is extremely important as any extra holes may, under extreme conditions, WEAKEN THE SPAR. Note;
More informationULS Cherokee. Ultra Low Speed aircraft for indoor RC flying. Zippkits. Specifications: Required to complete:
Zippkits ULS Cherokee Ultra Low Speed aircraft for indoor RC flying. Specifications: Span- 28 inches Wing Area- 151 Sq/In Wing Loading- 3.0 ounces/ft Weight- 3.5 ounces RTF Build time- 1-2 Hours Radio-
More informationEPP Rebel Z 35. White Red w/ Blue Orange w/ Blue Orange w/burgundy Other. Specs. Color - Bottom White Black Checkers Silver Checkers Other Checkers
EPP Rebel Z 35 Specs AUW ~10.0oz Width 35.28 Length 34.67 Wing Area 1.44 sqft Horz Area 2.35 sqft Vert Area.91 sqft
More informationSignage systems by ETC
Signage systems by ETC Built-up Premium Metal Letters 2 Fabricated Signage 7 Fabricated Totems & Monoliths 10 Flat Cut Metal Letters 12 Luxury Illuminated Letters 14 Electro-Tech Colour Ltd. 1 Blenheim
More informationThe Phoenix FockeWulf FW-190 Part 2
The Phoenix FockeWulf FW-190 Part 2 (refinishing) By: Roy Vaillancourt Overview: This is part 2 of the continuing story of the resurrection, rebuilding and restoration of my latest Focke Wulf FW-190. In
More informationHasegawa 1/48 P-40E. By Mike Hanlon
Hasegawa 1/48 P-40E By Mike Hanlon The definitive US Army Air Corps fighter in the eighteen months following Pearl Harbor, the P-40E fought in the Pacific, China, North Africa and the Aleutians. In addition
More informationAssembly Instructions
Assembly Instructions Parts Included: 1 Nose Cone 1 Body Tube 3 1/8 Balsa Fins 1 Thrust Ring 1 Motor Tube 1 Motor Hook 1 Motor Sleeve 2 Centering Rings 1 Launch Lug 1 Kevlar Shock Cord (yellow) 1 Elastic
More information1 P a g e. P13231 UAV Test Bed Setup Manual
1 P a g e P13231 UAV Test Bed Setup Manual Table of Contents Introduction....3 Wings... 3-4 Pitot Tube....3 Aileron Fault...4 Accelerometers.4 Fuselage.. 5-8 GPS.5 FPV System..5 ArduPilot 7 GoPro 7 Rudder
More informationWedge Log Cabin National Quilting Day Free Pattern. Quilt Alliance Document Preserve Share Join us:
2016 National Quilting Day Free Pattern y 25thanniversar National Quilting M Day 6 a rc h 1 19, 2 0 A gift to the quilting community by the Quilt Alliance. Document Preserve Share: Don t let the story
More informationBashing The Hanger 9 Cessna 182 ARF Part 4
Bashing The Hanger 9 Cessna 182 ARF Part 4 Eric Helms Pongo Air This is the final installment of a four-part article covering a variety of modifications incorporated into a Hanger 9 Cessna 182 ARF. Upgrades
More informationSTOL CH nd Edition Drawings July 20, 2010 Summary of changes from Edition 1 to Edition 2.
STOL CH 750 2 nd Edition Drawings July 20, 2010 Summary of changes from Edition 1 to Edition 2. Page Date Drawing Title 75-G-0 07/10 Three View Drawing 75-G-1 07/10 Drawings Index 75-G-2 03/10 General
More informationSummer Day Teddy. DecoArt Paints. Dazzling Metallics Ice Blue, Splendid Gold Sharon Chinn Page 1. by Sharon Chinn
DecoArt Paints Traditions Artist Acrylics or Titanium White - DAT35 Carbon Black - DAT42 Dark Grey Value 3 - DAT41 Medium Grey Value 6 - DAT40 Burnt Umber - DAT46 Raw Sienna - DAT43 Yellow Oxide - DAT12
More informationHow to paint a space ship Sci Fi scene.
How to paint a space ship Sci Fi scene.. What You Need: You can get all of these materials at a gold or above art centre go to /stockist cmmd6012 mont marte double thick canvas 60 x 120 cm mamd0001 mont
More informationCOMET SENIOR DART REPRODUCTION ASSEMBLY GUIDE
COMET SENIOR DART REPRODUCTION A RUBBER POWERED 24" WING SPAN MODEL BY PAUL BRADLEY ASSEMBLY GUIDE JANUARY 2018 CHANGES MADE TO THE ORIGINAL The following changes were made to the original Comet kit structural
More informationREAR FUSELAGE ASSEMBLY
SECTION 2 Rear Fuselage Bottom Assembly Ref Dwg 8FR-2 SECTION 2 - Page 1 of 17 FUSELAGE BOTTOM SKIN 8F2-3A Note: The edges of skin 8F2-3A are not a straight line. Check: edge distance from the center of
More informationSTOL CH 701. Standard L ANGLES are supplied in 4ft length. Ref. bottom left diagram on drawing 7-V-2
Standard L ANGLES are supplied in 4ft length. Ref. bottom left diagram on drawing 7-V-2 Length = 206mm. Layout the cut line on the outside flanges. Ref. see boxed diagram on drawing 7-V-2 Three vertical
More informationHigh performance 90mm fiberglass jet
High performance 90mm fiberglass jet Assembly manual For intermediate and advanced fliers only! Specs Wingspan: 1255mm Fuselage length: 1250mm Flying weight: 2600-3000g Wing area: 22.6 dm² Wing loading:
More informationI hope you enjoy the Spirit as much as I have. Scott DeTray Model Aero
We are excited to introduce the Model Aero Spirit. Inspired by the magnificent Northrop Grumman B-2 Spirit Stealth Bomber, the Spirit is a great flyer, on land or water. It tracks like an arrow and is
More informationFLITZEBOGEN-2 Assembly instructions
FLITZEBOGEN-2 Assembly instructions Trim the end of the fuselage to the length of 925mm from the nose. Be careful to avoid splitting the carbon fibers. Sand the base of the stab mount in preparation for
More informationZODIAC 601 XL UPRIGHT CHANNELS 6B5-6. Top and bottom outboard flange is joggle to overlap the.093 extrusion 6B2-3 and 6B11-1
UPRIGHT CHANNELS 6B5-6 Top and bottom outboard flange is joggle to overlap the.093 extrusion 6B2-3 and 6B11-1 Length: fits between the bottom and top longerons. Clamp the upright channel to the rear frame
More informationHIGH-END TECHNOLOGY. Electric ducted fan rafale
HIGH-END TECHNOLOGY RC Electric ducted fan rafale First we want to thank and congratulate you with your decision in buying one of our Kits. The Rafale puts together very easily so there is not much explanation
More informationmermaid Social Artworking Instruction Sheet
mermaid Social Artworking Instruction Sheet 2016 DecoArt Social Artworking mermaid time approximately 21/2-3 hours brushes: 4 3/4" Flat No. 2 Round No. 6 Bright No. 12 Bright colors: 8 Bright Red Cobalt
More informationBuilding No-Cal indoor planes. Printing on tissue
Building No-Cal indoor planes No-Cal is a simple formula for duration competitions. You need a scale-ish model with the correct outline and markings. The maximum wingspan is 16 and rubber power. The full
More informationDWG 002. Blueprint Reading. Geometric Terminology Orthographic Projection. Instructor Guide
DWG 002 Blueprint Reading Geometric Terminology Orthographic Projection Instructor Guide Introduction Module Purpose The purpose of the Blueprint Reading modules is to introduce students to production
More information1/6 PA-25 PAWNEE. *Specifications are subject to change without notice.*
1/6 PA-25 PAWNEE INSTRUCTION MANUAL [ A335 Kit ] Wing Span : 72 in / 1830 mm Wing Area : 736 sq in / 47.5 sq dm Flying Weight : 6.6 lbs / 3000 g Fuselage Length : 48 in / 1220 mm Requires : "Glow Power"
More informationRyan STA Sport Scale Model Aircraft Assembly and Instruction Manual
Ryan STA Sport Scale Model Aircraft Assembly and Instruction Manual Warning: This radio controlled model is not a toy. It requires skill to fly and is not recommended for the novice pilot. It should not
More informationLANDING GEAR. 1. Fit landing gear into slots on bottom of fuselage.
LANDING GEAR 1. Fit landing gear into slots on bottom of fuselage. 4. Use channel-lock pliers to press blind nuts into position (note: drilled hole should be slightly smaller than shaft of blind nut for
More information16. Wing Final Assembly and Installation
Section Objective: Installation and rigging of ailerons. Pitot tube install, and any other wing related items. Required Parts: Left aileron push rod ALA-0072, Right aileron push rod ALA-0073, Push tube
More informationAP Statistics Composition Book Review Chapters 1 2
AP Statistics Composition Book Review Chapters 1 2 Terms/vocabulary: Explain each term with in the STATISTICAL context. Bar Graph Bimodal Categorical Variable Density Curve Deviation Distribution Dotplot
More informationSewingMachinesPlus.com CLASS INFORMATION or
SewingMachinesPlus.com CLASS INFORMATION 760-739-8222 or 800-401-8151 Name of Class Cross Stitch Machine Embroidery Date(s) and Tuesday, February 28, 2012 Times of class 10 am to 5 pm Cost of class $30
More informationby: David P. Andersen
by: David P. Andersen Are you ready to design? Have you mastered; Plan Building or Kit Bashing? Are you a good pilot? Do you understand basic principles of structure and flight? Will you enjoy every step
More informationBOBS CARD MODELS. Canadair CL-215 (1:72)
BOBS CARD MODELS www.bobscardmodels.com Canadair CL-215 (1:72) Canadair was a civil and military aircraft manufacturer in Canada. It was the subsidiary of other aircraft manufacturers and a nationalized
More informationAir Tractor, Inc. Repairs Page 5-i AT-802/802A July 30, 2008
Repairs Page 5-i TABLE OF CONTENTS SECTION 5- REPAIRS No. Page FUSELAGE FRAME REPAIRS... 5-1 FORWARD CLAMP BLOCK BOLT FAILURE..5-1 STANDARD STRUCTURAL REPAIR DRAWINGS...5-1 Repairs Page 5-1 April 12, 2010
More informationPHOTOSHOP DESIGN EFFECTS FOR INTERMEDIATE TO ADVANCED USERS
PHOTOSHOP DESIGN EFFECTS FOR INTERMEDIATE TO ADVANCED USERS Copyright 2012, National Seminars Training Introduction This class is all about design effects in Adobe Photoshop. For example, let s say that
More informationSPAD. SPAD Derelict. Simple Plastic Airplane Design
Derelict SPAD Simple Plastic Airplane Design SPAD Derelict The Derelict. This is our third design entry for an RCCA legal open "B" class plane. The main difference in this design is the choice of materials.
More informationInstruction Manual. Specification:
Instruction Manual H I G Specification: Wingspan: 133 cm (52.3 inches) Length : 104 cm (40.9 inches) Weight : 1830gr Engine : 25-32 two stroke Radio : 4 channel - 4 servo H W I N G KIT CONTENTS: We have
More informationREVISION LIST CHAPTER 7: AIRCRAFT ALIGNMENT JIG
REVISION LIST CHAPTER 7: The following list of revisions will allow you to update the Legacy construction manual chapter listed above. Under the Action column, R&R directs you to remove and replace the
More information51
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 Spitfire MkVIII by Geoff Pentland for 29 35 engines from Aero Modeller December 1960. Near-scale model of the famous WWII fighter will complete the most
More informationINS TRUC T I ON M A NU A L
INS TRUC T I ON M A NU A L Packing list: 1: PP F6F fuselage *1 2: Carbon tube 5*5*940mm *1 3: Pull rod *4 4: Motor mount *1 5: Quick rod adjuster *4 6: Hinge *4 7: M3 screws *4 8: Hook and loop tape *1
More informationAUTUMN DEER. by Barb Halvorson
AUTUMN DEER by Barb Halvorson EXCLUSIVE Autumn Deer by Barb Halvorson PALETTE DecoArt Americana Premium Tube Acrylics Burnt Sienna #14527 Burnt Umber #14526 Cadmium Orange Hue #14530 Cadmium Red Hue #14522
More informationMinicraft B-24D. Modeling a. Hand-painting and heavy weathering deliver a Liberator
Carmine gave a Minicraft 1/72 scale B-24D a thorough going-over to model a Liberator of the Snow White Squadron, a famous participant in the low-altitude raid on the refineries at Ploesti in August 1943.
More informationThe Putora Sharpness Indicator Instructions
264 Morris Avenue Mountain Lakes, NJ 07046 973-335-4460 The Professionals Choice sales@zgc.com www.zgc.com About the Sharpness Indicator. The Putora Sharpness Indicator Instructions Description The Sharpness
More informationThank you for your purchase of the Lee Ulinger, FoamtanaS, Yak-55, or Extra 330 3D Depron foam, Aerobatic airplane.
Thank you for your purchase of the Lee Ulinger, FoamtanaS, Yak-55, or Extra 330 3D Depron foam, Aerobatic airplane. Tools you will need to build Recommended additional items: #11 hobby knife Motor: Hacker
More informationExcavating, Backfilling, and Compaction for Utilities Piping (Plumbing).
SECTION 15047 - IDENTIFICATION PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Identification including necessary accessories indicated on Construction Documents and specified in this section or as required
More informationREAR FUSELAGE ASSEMBLY
SECTION 5 Tail Attachments on Fuselage Ref Dwg 8RU-3 The rudder hinge line (HL) is parallel to the aft edge of the fuselage skin SECTION 5 - Page 1 of 9 Looking at the top of the rear fuselage. Stabilizer
More informationHistoric Wings. 1:72 Metal Kit of the. Copyright unknown Antoinette VII. History, Notes and Assembly Instructions
Historic Wings 1:72 Metal Kit of the Copyright unknown 1911 Antoinette VII History, Notes and Assembly Instructions History The Antoinette company was named after the daughter of the director, Jules Gastambide,
More informationStall warner - retrofit installation - XS
Stall warner - retrofit installation - XS Part 1 - retrofit to aircraft with XS wings Mark a point on the starboard wing root rib half way between the forward lift pin and the front of the spar, and half
More information77.5 degrees REAR CHANNEL PLYWOOD TEMPLATE
77.5 degrees REAR CHANNEL PLYWOOD TEMPLATE Ref. 6-B-14 Make following template: Vertical distance = 300mm Layout dimensions shown in the bottom right table on drawing 6-B-14 Top and bottom are square to
More informationSD3-60 STRUCTURAL REPAIR MANUAL - STRUCTURAL IDENTIFICATION
SRM 14.0.0.0WING FLAPS - STRUCTURAL IDENTIFICATION 1. General This subject identifies the structural components and the skin plating of the wing flaps. Details are given of specific location, material
More informationAdvance Steel. Tutorial
Advance Steel Tutorial Table of contents About this tutorial... 7 How to use this guide...9 Lesson 1: Creating a building grid...10 Step 1: Creating an axis group in the X direction...10 Step 2: Creating
More informationColor Pencil Techniques and Toned Drawing Practice Exercises
Color Pencil Techniques and Toned Drawing Practice Exercises Objectives: Learn to create values in black, white, and grayscale Practice color pencil techniques Learn ways of mixing color Become familiar
More informationZODIAC CH 601 Series Kit Aircraft
ZODIAC CH 601 Series Kit Aircraft THE FOLLOWING IS A DRAFT MANUAL This manual has been written and published strictly for informational purpose. It has been prepared as a guide to facilitate the assembly
More informationLUNAR EXPRESS. Little
Little LUNAR EXPRESS The Little Lunar Express kit contains all the parts necessary* to build a flying high power rocket: 1) Pre-slotted boattail 1) Airframe 5.5" long 1) Nose cone 2) Main fins 2) Stabilizer
More informationTaco Bell Restaurant kit in HO scale
Taco Bell Restaurant kit in HO scale Parking lot base and cars not included This kit includes all building parts milled in white styrene plastic, clear window glazing, Plastruct tile roofing, and logo
More informationShow Bookmarks
InsightTM Technical Education www.insightteched.com 877.640.2256 Show Bookmarks Legal information: Copyright 2008 by Insight Technical Education All rights reserved. No part of this work may be reproduced
More informationŸ Battery Strap Ÿ Paper Knife Ÿ Elevon Throw Gauge Ÿ Instructional Manual. Building Tools:
Congratulations on your purchase of the TuffBirds Spec Racer Flying Wing. We Hope these build instructions will help you complete the build easily. Though the build itself doesn't take much time, just
More informationSkill Level 3 Average Skills Needed. Skill Level 3. Skonk Wulf Parts List
Kit #05153 Skill Level 3 Made In USA Skonk Wulf Parts List Item # Item Name Qty 10091 AT-24/3.75" 1 10186 AT-66/14.2" Body Tube 1 13031 CR 18/24 1 13314 CR 24/66 1/8" Plywood 2 13056 1/4" Launch Lug 1
More informationSummer Lilacs by Donna Hodson, CDA
Summer Lilacs by Donna Hodson, CDA Summer Lilacs By Donna Hodson, CDA Palette: DecoArt Americana Acrylics Antique Gold #13009 Cadmium Yellow #13010 Dioxazine Purple #13101 Hauser Dark Green #13133 Hauser
More informationFundamentals of Model Airplane Building
The dihedral and sweepback give stability The finished glider ready to launch Fundamentals of Model Airplane Building A Complete Course for Beginners Who Wish to Become Expert. How to Build a Contest Glider-Part
More informationNO. 8 FINISH (MIRROR POLISHED) Obtained by polishing with successively finer abrasives, then buffing with a very fine compound. RANDOM SWIRL FINISH
Stainless Steel Textured Finishes Textured Surface Finishes on Stainless Steel NO. 4 FINISH A lightly grained surface produced by single-directional abrading. The most common stainless finish for architectural
More informationFORWARD FUSELAGE SIDES & REAR TOP SKINS
FORWARD FUSELAGE SIDES & REAR TOP SKINS WORK REPORT Step No. Check Parts / Tools Qty Preparations. 1 [ ] 6F5-3 Upper Front Longerons 2 2 [ ] 6F5-5 Heel Support 1 3 [ ] 6F5-2 Front Floor Skin 1 3 [ ] Firewall
More information25mm EPP SU31. Instruction Manual. Specifications
25mm EPP SU31 Instruction Manual Specifications Wingspan: 39.4in (1000mm) Length: 42in (1070mm) Wing Area: 448sq in (28.9sq dm) Flying Weight: Approx. 1.5lb (650-710g) Dear Customer, www.valuehobby.com/su31-epp.html
More informationHow to paint a Painterly landscape using the 8pce Oil Colour Intro set
How to paint a Painterly landscape using the 8pce Oil Colour Intro set www.montmarte.net Copyright of Mont Marte International Pty Ltd ACN 101589897 Materials List... The materials for this lesson can
More informationHow to Paint an Abstract Butterfly
How to Paint an Abstract Butterfly Materials List... The materials for this lesson can be found at a Gold or above Art Centre. Go to to find the one nearest to you. CMMD9090 Mont Marte Double Thick Canvas
More informationINCLUDED IN THIS KIT: SPECIFICATION: NEEDED BUILDING TOOLS: REQUIRED EQUIPMENT:
Please review this entire manual before beginning assembly. By doing so it will help you better understand each step as you progress in the actual building of your kit, and you will do a better job in
More informationMusical Daze. 18 x 20 Inches Flat Panel Canvas Acrylic Paints Gloss Finish Colors: Red, White, Black and Gold PRICE $75
Musical Daze 18 x 20 Inches Flat Panel Canvas Red, White, Black and Gold PRICE $75 Spaced Out 30 x 40 Inches Acrylic Paint Navy, Silver, Black and White Price $900 Faces of Color 24 x 30 Inches Red, Yellow,
More informationKodo build guide 1.4
Kodo build guide 1.4 Please do not share files that you bought Development of a new plane and support of the old ones is very time consuming. Only with your help I can focus fully on this project and spend
More information35 Magnum. Instruction Manual
EPP EPP 35 35 Magnum Rebel Z Instruction Manual This is how your kit will arrive When cutting the hardware package open use caution. The contents are semi-coiled to fit in the box. They will spring open
More informationNotes on Irish Air Corps colours and markings.
Notes on Irish Air Corps colours and markings. By and large modellers will always try and find the exact shade of paint to match the full size aircraft they are trying to replicate in scale form. There
More informationColor Your Own Stickers Letters & Numbers: Just Color, Peel, And Stick By Peg Couch
Color Your Own Stickers Letters & Numbers: Just Color, Peel, And Stick By Peg Couch If searched for a book Color Your Own Stickers Letters & Numbers: Just Color, Peel, and Stick by Peg Couch in pdf form,
More informationNASTY Build Guide. Supplies needed
NASTY Build Guide Supplies needed Blucore or Depron Foam. Blucore (Fan Fold Foam) is available at Lowes. Approximately $25 for 50 feet of Blucore. Depron can be ordered on the internet for slightly more.
More informationBuilding a Vailly Aviation Hawker Hurricane...Instalment 10
Building a Vailly Aviation Hawker Hurricane...Instalment 10 Painting: I am a lousy painter of model aeroplanes, anybody looking for a few clues from this section of the build is well advised to look elsewhere.
More informationHow to Sketch a Lion using Graphite Pencils
How to Sketch a Lion using Graphite Pencils Materials List... The materials for this lesson can be found at a Gold or above art centre. Go to to find the one nearest to you. MSB0053 Mont Marte Sketch Pad
More informationRoR Step-by-Step Review Consolidated B-24J Liberator 1:48 Monogram # Review Click Here to Buy This Kit
RoR Step-by-Step Review 201207011 Consolidated B-24J Liberator 1:48 Monogram #85-5629 Review Click Here to Buy This Kit The Consolidated B-24 Liberator was an American heavy bomber, designed by Consolidated
More information75-TA-4. Elevator Skins
75-TA-4 This manual has been prepared for assembly of the. This photo assembly manual is intended as a supplement to the drawings. If there is any discrepancy between this manual and the drawings, the
More informationBobs Card Models
Bobs Card Models www.bobscardmodels.com Canadair CL-415 (1:72) The Bombardier 415 (formerly Canadair CL-415) is a Canadian amphibious aircraft purpose-built as a water bomber. It is the only aircraft designed
More informationSNEAKING A PEEK. by Barb Halvorson
SNEAKING A PEEK by Barb Halvorson EXCLUSIVE Sneaking A Peek by Barb Halvorson PALETTE DecoArt Americana Acrylics Honey Brown #13163 Lamp Black #13067 Traditional Burnt Umber #13221 Ultramarine Blue #13225
More informationSpecifications Wingspan: 43cm Flying Weight: 33 grams (with battery) Channels: 3 Suggested Receiver: 4Ch Micro Motor: 7mm Brushed Geardrive
Specifications Wingspan: 43cm Flying Weight: 33 grams (with battery) Channels: 3 Suggested Receiver: 4Ch Micro Motor: 7mm Brushed Geardrive Airframe Kit (Included Contents) * Airframe Parts Sheets (Depron)
More informationBasic elements. Corporate Mark. Corporate Colors. Typeface. Avant Garde Gothic Condensed - Demi. Basic elements chart. Vertical Corporate Mark
Basic elements chart Basic elements chart The basic elements comprise Corporate M arks, Corporate Colors and Corporate Typeface. These elements are the core for visually expressing the latest Visual I
More informationEPP EAGLE THE RC RAPTOR
EPP EAGLE THE RC RAPTOR Installation Manual FLYEAGLE2007@GMAIL.COM TM Step 1: Verify that all the EPP Eagle pieces are included in the Kit. Before we start. Step 2: Identify the pieces need to assemble
More informationSTOL CH 701. Clamp a reference extrusion on the bottom of the spar. Clamp the bottom flange of the rib to the extrusion. Rear Root Rib 7V4-2
Rear Root Rib 7V4-2 Clamp a reference extrusion on the bottom of the spar. Clamp the bottom flange of the rib to the extrusion. Cleco the root nose rib to the spar Position the rear root rib at station
More informationAircraft assembly and disassembly
Following instructions are related to ATEC 321(322) FAETA with wingtanks, but in general the basic methodics (besides several few differencies) is applicable also to other ATEC models. Aircraft assembly
More information