The following are OSHA Construction Standards that require self-inspection, training, and written programs or are required to be posted.

Size: px
Start display at page:

Download "The following are OSHA Construction Standards that require self-inspection, training, and written programs or are required to be posted."

Transcription

1 The following are OSHA Construction Standards that require self-inspection, training, and written programs or are required to be posted. Legend: Y = Yes I = Initial AN = As Needed RF = Refresher P = Posted N = No A = Annual R = Recommended EV = Evaluation Standard Self Training *Written Standard Language Number Inspection Frequency Program Inspections, citations, penalties, rights Y I P Recordkeeping of Injuries & Illness Y I *Y & P General Safety & Health Provisions Y Y R Safety Training & Education Y *I & AN R First Aid & Medical Attention, General Y Y R Fire Protection & Prevention Y Y R Housekeeping Y *I & AN R Illumination Y Y R Sanitation, General Y Y R Personal Protective Equipment, General Y Y R Acceptable Certifications Y R R Shipbuilding & Ship Repairing Y I & AN Y Incorporation By Reference Y R R Access to Employee Exposure & Medical Records Y I &A Y* & P Means of Egress Y *I & AN Y Emergency Action Plans Y *I & AN R Medical Services & First Aid Y *I & AN R Sanitation Y *I & AN Y* Occupational Noise Exposure Y I, A & AN Y* & P Ionizing Radiation Y *I & AN R Non-ionizing Radiation Y *I & AN R Gases, Vapors, Fumes, Dusts & Mists Y *I & AN Y* Illumination Y *I & AN R Ventilation Y *I & AN R Page 1 10/23/2008

2 * Hazard Communication Y I & AN Y Methylenedianiline Y *I & AN Y * Retention of DOT Markings, Placards & Labels Y R Y* Lead Y I & A Y PSM Y *I, R & AN Y HAZWOPER Y I & RF Y Design & Construction of Spray Booths Y *I & AN Y* Criteria for Personal Protective Equipment Y *I & AN R Occupational Foot Protection Y *I & AN R Head Protection Y I & AN R Hearing Protection Y I, A & AN Y* Eye & Face Protection Y *I & AN R * Respiratory Protection Y I & AN Y Safety Belts, Lifelines, & Lanyards Y I & AN R Safety Nets Y *I & AN R Working Over or Near Water Y *I & AN Y Fire Protection Y *I & A Y* Fire Prevention Y *I & A R* Flammable & Combustible Liquids Y *I & AN R LP Gas Y *I & AN R Temporary Heating Devices Y *I & AN Y* Accident Prevention Signs & Tags Y *I & AN Y* Signaling Y *I & AN R Barricades Y I & AN R Storage Requirements, General Y *I & AN R Rigging Equipment for Material Handling Y *I & AN R Disposal of Waste Materials Y *I & AN R Hand Tools Y *I & AN R Power-Operated Hand Tools Y *I & AN Y* Abrasive Wheels & Tools Y *I & AN R Woodworking Tools Y *I & AN R Jacks Y *I & AN R Air Receivers Y *I & AN R Mechanical Power-Transmission Apparatus Y *I & AN R Gas Welding & Cutting Y *I & AN R Arc Welding & Cutting Y *I & AN R Fire Prevention Y *I & AN R Ventilation & Protection in Welding, Cutting, & Heating Y *I & AN R Welding, Cutting & Heating / Perservative Coatings Y *I & AN R Electrical, General Requirements Y *I & AN R Wiring Design & Protection Y *I & AN Y* Wiring Methods Y *I & AN Y* Specific Purpose Equipment & Installations Y *I & AN Y* Hazardous Locations Y *I & AN Y* Special Systems Y *I & AN R Page 2 10/23/2008

3 Maintenance of Equipment Y *I & AN Y* Environmental Deterioration Y *I & AN R Battery Charging Y *I & AN Y* General Requirements, Scaffolds Y I & AN Y* Specific Requirements, Scaffolds Y I & AN R Aerial Lifts Y I & AN R Training Requirements Y I & AN R Duty to Have Fall Protection Y I & AN Y* Fall Protection Systems Criteria & Practices Y I & AN Y* Training Requirements Y I & AN Y* Cranes & Derricks Y *I & AN R Helicopters Y *I & AN R Material Hoists, Personnel Hoists & Elevators Y *I & AN Y* Base-Mounted Drum Hoists Y *I & AN Y* Overhead Hoists Y *I & AN Y* Conveyors Y *I & AN Y* Equipment Y *I & AN R Motor Vehicles Y *I & AN R Material Handling Equipment Y *I & AN R Pile Driving Equipment Y *I & AN R Site Clearing Y *I & AN R Marine Operations & Equipment Y *I & AN R Specific Excavation Requirements Y *I & AN R Requirements for Protective Systems Y *I & AN Y* Masonry & Concrete, General Requirements Y *I & AN Y* Requirements for Equipment & Tools Y *I & AN Y* Requirements for Cast in Place Concrete Y *I & AN R Requirements for Precast Concrete Y *I & AN R Requirements for Lift-Slab Operations Y *I & AN R Requirements for Masonry Construction Y *I & AN R Site-Specific Steel Erection Plan Y *I & AN Y Hoisting & Rigging Y *I & AN Y* Structural Steel Assembly Y *I & AN R Column Anchorage Y *I & AN R Beams & Columns Y *I & AN R Open Web Steel Joists Y *I & AN R System-Engineered Metal Buildings Y *I & AN R Falling Object Protection Y *I & AN R Fall Protection Y *I & AN Y* Training Y *I & AN Y* Underground Construction Y *I & AN Y* Caissons Y *I & AN R Cofferdams Y *I & AN R Compressed Air Y *I & AN Y* Preparatory Operations, Demolition Y *I & AN Y* Page 3 10/23/2008

4 Stairways, Passageways & Ladders Y *I & AN R Chutes Y *I & AN R Removal of Material Through Floor Openings Y *I & AN R Removal of Walls, Masonry Sections & Chimneys Y *I & AN R Manual Removal of Floors Y *I & AN R Removal of Walls, Floors and Materials with Equipment Y *I & AN R Storage Y *I & AN Y* Removal of Steel Construction Y *I & AN Y* Mechanical Demolition Y *I & AN Y* Selective Demolition by Explosives Y *I & AN Y* Blasting, General Provisions Y *I & AN Y* Blaster Qualifications Y *I & AN Y* Surface Transportation of Explosives Y *I & AN Y* Underground Transportation of Explosives Y *I & AN Y* Storage of Explosives or Blasting Agents Y *I & AN Y* Loading of Explosives or Blasting Agents Y *I & AN Y* Initiation of Explosives Charges Y *I & AN Y* Use of Safety Fuse Y *I & AN Y* Use of Detonating Cord Y *I & AN Y* Firing the Blast Y *I & AN Y* Inspection After Blasting Y *I & AN Y* Misfires Y *I & AN Y* Underwater Blasting Y *I & AN Y* Blasting in Excavation Work Under Compressed Air Y *I & AN Y* Power Transmission & Distribution, General Y *I & AN Y* Tools & Protective Equipment Y *I & AN Y* Mechanical Equipment Y *I & AN Y* Material Handling Y *I & AN Y* Grounding for Protection of Employees Y *I & AN Y* Overhead Lines Y *I & AN Y* Underground Lines Y *I & AN Y* Construction in Underground Substations Y *I & AN Y* Construction in Energized Substations Y *I & AN Y* Lineman s Body Belts, Safety Straps & Lanyards Y *I & AN Y* ROPS for Material Handling Equipment Y *I & AN R ROPS, Performance Criteria Y *I & AN R ROPS, Used in Construction Y *I & AN R ROPS, Industrial Tractors Y *I & AN R General Requirements, Stairways & Ladders Y *I & AN R Stairways Y *I & AN R Ladders Y *I & AN R Training Requirements Y *I & AN Y* * Qualifications of Dive Team Y *I & RF Y* * Safe Practices Manual Y *I & RF Y* * Pre-Dive Procedures Y *I & RF Y* Page 4 10/23/2008

5 * SCUBA Diving Y *I & RF Y* * Surface-Supplied Air Diving Y *I & RF Y* * Mixed-Gas Diving Y *I & RF Y* * Lifeboating Y *I & RF Y* * Equipment Y *I & RF Y* * Recordkeeping Requirements Y *I & RF Y* Asbestos Y I & A Y * Coal Tar Pitch Volatiles Y I & A Y * Carcinogens Y I & A Y * Alpha-Naphthylamine Y I & A Y * Methyl Chloromethyl Ether Y I & A Y * ,3 Dichlorobenzidiene Y I & A Y * Bis-Chlorometyl Ether Y I & A Y Beta-Naphthylamine Y I & A Y * Benzidine Y I & A Y * Aminodiphenyl Y I & A Y * Ethyleneimine Y I & A Y * Beta-Propiolactone Y I & A Y * Acetylaminofluorene Y I & A Y * Dimethylaminoazobenzene Y I & A Y * N-Nitrosodimethylamine Y I & A Y * Vinyl Chloride Y I & A Y * Inorganic Arsenic Y I & A Y Chromium VI Y I & A Y Cadmium Y I & A Y * Benzene Y I & A Y * Coke Oven Emissions Y I & A Y * ,2-Dibromo-3-chloropropane Y I & A Y * Acrylonitrile Y I & A Y * Ethylene Oxide Y I & A Y * Formaldehyde Y I & A Y * Methylene Chloride Y I & A Y In the Written Program column, * indicates that an internal policy, procedures, record retention, signage, job instructions or scheduled maintenance work order is required whereas a complete written program may not be required. Read the OSHA standard for the exact requirement. In the Training Frequency column, * indicates that will be used to cite the lack of employee training. A CSHO s observance of danger or potential danger, consensus standard or the manufacturer s manual for end users of the product will be used to support the citation. Page 5 10/23/2008

6 In the Standard Number column, * indicates that the Construction standard follows the GI standard or that the GI standard includes construction activities in the Scope. *AN = as needed means that retraining must be conducted when the HAZARD changes; whether by the introduction of a new hazard or a person s job task changes, introducing a new hazard. Retraining is also required if, for any reason, the employee s work habit indicates that they may not have retained the original training. Page 6 10/23/2008

Online Training Course Library

Online Training Course Library Online Training Course Library ClickSafety is the leading provider of online safety and health training for the Construction, Mining, and General Industries. Our extensive library includes 300+ courses

More information

Management. Industrial Safety and Heal. Sixth Edition. David W. Rieske. C. Ray Asfahl. University of Arkansas UNIVERSITATSB'.

Management. Industrial Safety and Heal. Sixth Edition. David W. Rieske. C. Ray Asfahl. University of Arkansas UNIVERSITATSB'. Industrial Safety and Heal Management Sixth Edition C. Ray Asfahl David W. Rieske \ University of Arkansas TECHNISCHE INFORMAT i O N SSiSU,)TH EK UNIVERSITATSB'.BLIOTHEK Prentice Hall Upper Saddle River

More information

CPL LOG Updated February 3, 2017

CPL LOG Updated February 3, 2017 CPL NUMBER 06-03 (CPL 02) 10-02 (CPL 02) CPL 01-00-003 Old CPL 1-0.3 CPL 02-00-002 Old CPL 2.2 CPL 02-00-009 Old CPL 2.9 CPL 02-00-025 Old CPL 2.25I CPL 02-00-042 Old CPL 2.42 CPL 02-00-042 Old CPL 2.42

More information

Beyond OSHA Compliance

Beyond OSHA Compliance Foth Production Solutions, LLC Personalized Client-Centered Service When is fall protection required? 1926= 30 feet (steel erection; required) 1926= 15 feet (steel erection; provided) 1926= 10 feet (scaffolding)

More information

HAND AND POWER TOOLS

HAND AND POWER TOOLS HAND AND POWER TOOLS Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio 44256 (330) 725-6090 HAND AND POWER TOOLS General All power tools whether furnished by Steingass Mechanical Contracting,

More information

Industrial Safety and Health Management

Industrial Safety and Health Management Industrial Safety and Health Management Seventh Edition C. Ray Asfahl David W. Rieske University of Arkansas 330 Hudson Street, NY NY 10013 A01_ASFA0564_07_SE_FM.indd 1 27/11/2017 07:39 Director, Portfolio

More information

A Safe Workplace A Workplace Safety and Health Manual for Your Community Section: I Subject:

A Safe Workplace A Workplace Safety and Health Manual for Your Community Section: I Subject: Section ntroduction and Disclaimer A. Workplace Safety and Health Program Policy Appendix -A-1 Statement of Responsibilities B. Community Harassment Prevention Appendix -B-1 Sample Community Harassment

More information

Spanish Language Safety Training Videos for Loan!

Spanish Language Safety Training Videos for Loan! 2005 OSHA RESOURCE CENTER LOAN PROGRAM Spanish Language Safety Training Videos for Loan! Located on the OSHA Website http://www.osha.gov/fso/ote/training/resource-center/loan.html Or contact the Resource

More information

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter.

Knowledge Requirements. Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator. trainthepainter. Knowledge Requirements Protective Coatings Applicator Abrasive Blast Cleaning Operator Spray Painting Operator trainthepainter.com Knowledge Requirements The Knowledge Requirements the protective coatings

More information

SHOP SAFETY AND TRAINING IN ACADEMIC DEPARTMENTS

SHOP SAFETY AND TRAINING IN ACADEMIC DEPARTMENTS Page 1 of 6 SHOP AND TRAINING IN ACADEMIC DEPARTMENTS 1. All students and employees (staff and faculty) are required to complete documented safety training prior to using any machines or power tools in

More information

Total Test Questions: 65 Levels: Grades Units of Credit: 1.0

Total Test Questions: 65 Levels: Grades Units of Credit: 1.0 DESCRIPTION This course will focus on the foundation of construction trades. Students will learn and practice basic safety skills. They will need to understand and demonstrate basic math skills. Students

More information

Environmental Health and Safety Office Hazardous Dust Control Guide

Environmental Health and Safety Office Hazardous Dust Control Guide Created February 2012 Table of Contents A. Purpose and Policy... Page 2 B. Introduction to Wood Dust...Page 2 C. Introduction to Combustible Dust.Page 3 D. House Keeping..Page 3 E. Other Hazards...Page

More information

Portable Hand and Power Tools Self-Inspection Checklist

Portable Hand and Power Tools Self-Inspection Checklist Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Portable Hand and Power Tools Self-Inspection Checklist Guidelines: This checklist covers

More information

FSS020-ADVANCED DIPLOMA IN FIRE & INDUSTRIAL SAFETY MANAGEMENT ONE YEAR EXAMINATION NOVEMBER TIME: 3 Hours Marks: 100

FSS020-ADVANCED DIPLOMA IN FIRE & INDUSTRIAL SAFETY MANAGEMENT ONE YEAR EXAMINATION NOVEMBER TIME: 3 Hours Marks: 100 1 BHARAT SEVAK SAMAJ NATIONAL DEVELOPMENT AGENCY, PROMOTED BY GOVERNMENT OF INDIA CENTRAL BOARD OF EXAMINATIONS BSS NATIONAL VOCATIONAL EDUCATION MISSION FSS020-ADVANCED DIPLOMA IN FIRE & INDUSTRIAL SAFETY

More information

SAFETY MANUAL All Models: On-Car Brake Lathes

SAFETY MANUAL All Models: On-Car Brake Lathes SAFETY MANUAL All Models: On-Car Brake Lathes On-Car Brake Lathe SAFETY MANUAL phone: 800.543.6618 fax: 603.298.8404 email: info@procutusa.com web: www.procutusa.com INTRODUCTION Thank you for purchasing

More information

This publication updates in June/December

This publication updates in June/December This publication updates in June/December 75-M (1530) Copyright 2017 J. J. Keller & Associates, Inc. 3003 Breezewood Lane P.O. Box 368 Neenah, Wisconsin 54957-0368 Phone: (800) 327-6868 Fax: (800) 727-7516

More information

ACCESS TO HIGH VOLTAGE APPARATUS

ACCESS TO HIGH VOLTAGE APPARATUS CORPORATE PROCEDURE ACCESS TO HIGH VOLTAGE APPARATUS Approved By: Prepared By: Issue Date: 17/6/2011 Andrew Macrides Access to Apparatus Rules File No: Managing Director Committee QDOC2011/63 Status: Approved

More information

BB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

BB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. BB07552 5 Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

Select, wear adjust, use and maintain personal protective equipment

Select, wear adjust, use and maintain personal protective equipment ANALYSIS PROFILE PROTECT SELF AND OTHERS Identify, interpret and apply applicable Acts, Codes and regulations Select, wear adjust, use and maintain personal protective Recognize and assess hazards and

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL Impact drill WX317 WX318 1 3 2 8 7 6 5 4 A1 A2 B C1 2 1 3 3 1 D C2 5 4 E F 2 E F 1 G 4 2 H 1. Keyless Chuck 2. Depth gauge 3. Drill/hammer drill function selector 4. Switch

More information

BRICKLAYER TRADE REGULATION

BRICKLAYER TRADE REGULATION Province of Alberta APPRENTICESHIP AND INDUSTRY TRAINING ACT BRICKLAYER TRADE REGULATION Alberta Regulation 265/2000 With amendments up to and including Alberta Regulation 119/2018 Current as of June 20,

More information

Subpart 6H Autobody / Surface Coating. Mecklenburg County Land Use and Environmental Services Agency Air Quality Division

Subpart 6H Autobody / Surface Coating. Mecklenburg County Land Use and Environmental Services Agency Air Quality Division Subpart 6H Autobody / Surface Coating Mecklenburg County Land Use and Environmental Services Agency Air Quality Division NESHAP Subpart 6H 40 CFR 63.11169 11180 Subpart HHHHHH National Emission Standards

More information

Tools Hand and Power. OSHA Office of Training and Education 1

Tools Hand and Power. OSHA Office of Training and Education 1 Tools Hand and Power 1 Hazards Workers using hand and power tools may be exposed to these hazards: objects that fall, fly, are abrasive, or splash harmful dusts, fumes, mists, vapors, and gases frayed

More information

WORK CREW SAFETY MANUAL

WORK CREW SAFETY MANUAL WORK CREW SAFETY MANUAL Introduction Safety is everybody s concern and is always an important consideration at any construction site. Building construction can be one of the most dangerous occupations.

More information

Spray Painting Policy

Spray Painting Policy Spray Painting Policy Form: Revision: MFG-20 C Revision Date: 1-8-2018 Spray Painting Policy Granite Falls, MN New Ulm, MN Watertown, SD Prentice, WI a.) Configuring, testing and maintaining the paint

More information

Fluke 570 Series Infrared Thermometers:

Fluke 570 Series Infrared Thermometers: Fluke 570 Series Infrared Thermometers: Adding more precision to non-contact temperature measurement Application Note 572 574 This application note describes the Fluke 570 Series, the most advanced infrared

More information

G r a d e 1 1 A F o u n d a t i o n s a n d F l o o r F r a m i n g

G r a d e 1 1 A F o u n d a t i o n s a n d F l o o r F r a m i n g G r a d e 1 1 A F o u n d a t i o n s a n d F l o o r F r a m i n g G r a d e 1 1 A : F o u n d a t i o n s a n d F l o o r F r a m i n g Course Description Carpentry 11A: Foundations and Floor Framing

More information

HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy

HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy INTRODUCTION Safety is everybody's concern and is always an important consideration at any construction site. Building construction is

More information

Indoor Air Quality and Noise Monitoring

Indoor Air Quality and Noise Monitoring Noise Monitoring Tony Kuehn CSP, OHST, ALCM Director Health and Safety Services Integrated Loss Control 1 Noise Monitoring Why Monitor for Indoor Air Quality & Noise? During this webinar you will learn

More information

Construction Trades Foundation

Construction Trades Foundation PRECISION EXAMS Construction Trades Foundation EXAM INFORMATION Items 65 Points 82 Prerequisites NONE Grade Level 10-12 Course Length ONE YEAR DESCRIPTION This course will focus on the foundation of construction

More information

My Background. Session Topics. General Industry Standards. Variety of Tools Covered. Related Standards/Hazards 1/27/2014

My Background. Session Topics. General Industry Standards. Variety of Tools Covered. Related Standards/Hazards 1/27/2014 My Background Shop Safety: Equipment and Tools Mary Bauer UW Extension Webinar January 28, 2014 Mary Bauer CIH, CSP Compliance Assistance Specialist Eau Claire, WI 54701 715-832-9019 28 years w/ OSHA 20

More information

Health & Safety Policy and Procedures Manual SECTION 5 HAND AND POWER TOOLS

Health & Safety Policy and Procedures Manual SECTION 5 HAND AND POWER TOOLS SECTION 5 HAND AND POWER TOOLS 1. POWER TOOLS A. References: 29 CFR 1926 Sub Part I (300-307) B. Employees using hand and power tools and exposed to the hazard of falling, flying, abrasive, and splashing

More information

National Craft Assessment and Certification Program S P E C I F I C A T I O N S

National Craft Assessment and Certification Program S P E C I F I C A T I O N S National Craft Assessment and Certification Program S P E C I F I C A T I O N S INDUSTRIAL MAINTENANCE MECHANIC V4 MEMT32_04 Released June 2013 Focus Statement A journey-level Industrial Maintenance Mechanic

More information

SAFETY AND OPERATING MANUAL. 750W/13mm IMPACT DRILL JM750ID

SAFETY AND OPERATING MANUAL. 750W/13mm IMPACT DRILL JM750ID SAFETY AND OPERATING MANUAL 750W/13mm IMPACT DRILL JM750ID GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may

More information

Small Business Success Podcast: OSHA AND WORKPLACE SAFETY

Small Business Success Podcast: OSHA AND WORKPLACE SAFETY Small Business Success Podcast: OSHA AND WORKPLACE SAFETY The SCORE Small Business Success Podcast features interviews with the best and brightest in the world of small business, covering topics such as

More information

CHAPTER 17 CONSTRUCTION ELECTRICIAN (CE) NAVPERS F CH-77

CHAPTER 17 CONSTRUCTION ELECTRICIAN (CE) NAVPERS F CH-77 CHAPTER 17 CONSTRUCTION ELECTRICIAN (CE) NAVPERS 18068-17F CH-77 SCOPE OF RATING GENERAL INFORMATION CONSTRUCTION ELECTRICIAN CONSTRUCTION MANAGEMENT TABLE OF CONTENTS CONSTRUCTION ELECTRICIAN (CE) ELECTRICAL

More information

Written Exposure Control Plan

Written Exposure Control Plan SILICA COMPLIANCE SEMINAR Written Exposure Control Plan Finger Lynes Engineering 6.0 Forms 6.1 Task Exposure Control Evaluation* 6.2 Communication of Respirable Crystalline Silica Hazards to Employee 6.2.1

More information

Dust Collector. Model No: DC2200 (FM300S)

Dust Collector. Model No: DC2200 (FM300S) Dust Collector Model No: DC2200 (FM300S) GENERAL SAFETY INSTRUCTIONS Before attempting to operate this machine, it is important that you read, understand and follow these instructions very carefully. They

More information

Pennsylvania s Land Recycling Program. Vapor Intrusion Technical Guidance

Pennsylvania s Land Recycling Program. Vapor Intrusion Technical Guidance Pennsylvania s Land Recycling Program Vapor Intrusion Technical Guidance Statewide Health Standard Vapor Intrusion Screening Values and Screening Process Tables List of Tables TABLE OF CONTENTS Table 1.

More information

SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.

SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees. SAFETY DIRECTIVE Title: Hand and Power Tools Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This

More information

LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM

LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM School: Industry Sector: Manufacturing & Product Dev. Class: Date: Teacher: Room: (Please Print)

More information

MAC000-HBK-ENG

MAC000-HBK-ENG Machine Guarding MAC000-HBK-ENG-0000 www.coastal.com 04-2001 Machine Guarding This employee handbook is one of a series of fully-illustrated employee handbooks, informative posters, broadcast-quality video

More information

TRAFFIC SIGNAL ELECTRICIAN, 3819

TRAFFIC SIGNAL ELECTRICIAN, 3819 01-31-92 TRAFFIC SIGNAL ELECTRICIAN, 3819 Summary of Duties: A Traffic Signal Electrician performs skilled technical work and acts as a lead for and works with a signal construction crew constructing,

More information

www.cad-designers.com Staffing Services Cad Designers is an established staffing company that specializes in providing professional support for the A/E/C industry. All candidates are screened with a complete

More information

Established Industrial Metal Division Sheet & Plate Metal Design Fabrication Installation

Established Industrial Metal Division Sheet & Plate Metal Design Fabrication Installation Established 1938 Industrial Metal Division Sheet & Plate Metal Design Fabrication Installation Three Generations of Experience, Dependability & Trust...We re Not Going Anywhere John W. McDougall Company

More information

A/E REVIEW CHECKLIST HVAC

A/E REVIEW CHECKLIST HVAC A/E CHECKLIST HVAC Reviewers should - Use Checklists when reviewing any type of VA construction project for the following disciplines: Site and Landscape, Architectural, Structural, Plumbing, Fire Protection,

More information

Industrial Pipe Marking

Industrial Pipe Marking Industrial Pipe Marking Pipe and Valve Identification Specialists SPECIFICATIONS ASME (ANSI) Standard A13.1-2007 The ASME (ANSI) Standard for pipe identification is a widely used guideline in determining

More information

Insteel Industries, Inc. Job Description

Insteel Industries, Inc. Job Description Job Description Insteel Industries, Inc. Job Description Job Title: Department: Location: Reports To: FLSA Status: Maintenance - Electrical (027) Maintenance (075) Insteel Wire Products, St. Joseph, MO

More information

Sample Slip and Fall Prevention Program

Sample Slip and Fall Prevention Program Slip and Fall Prevention Program United Heartland has developed this sample Slip, Trip and Fall (STF) prevention program to assist our customers as they develop their own program. It shares best practices

More information

Inside This Issue Kick-Back Hazards of Portable Saws Pipe Threader Safety Fatalities Top 10 Construction Violations

Inside This Issue Kick-Back Hazards of Portable Saws Pipe Threader Safety Fatalities Top 10 Construction Violations November 2010 Volume 9, Issue 2 U.S. Department of Labor Wisconsin Construction Safety Newsletter Inside This Issue Kick-Back Hazards of Portable Saws Pipe Threader Safety Fatalities Top 10 Construction

More information

CP Sub. Code 11 P.G. DIPLOMA IN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT EXAMINATION, NOVEMBER 2017 ORGANIZATIONAL BEHAVIOUR.

CP Sub. Code 11 P.G. DIPLOMA IN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT EXAMINATION, NOVEMBER 2017 ORGANIZATIONAL BEHAVIOUR. WSS CP 8501 Sub. Code 11 P.G. DIPLOMA IN OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT EXAMINATION, NOVEMBER 2017 ORGANIZATIONAL BEHAVIOUR (Upto 2015 Batch) Time : 3 Hours Maximum : 75 Marks Part A (5 3 =

More information

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880

More information

SAFE WORK METHOD STATEMENTS MBS CPD Points

SAFE WORK METHOD STATEMENTS MBS CPD Points SAFE WORK METHOD STATEMENTS MBS 7.01 2 CPD Points Copyright and Disclaimer: MyBuildingSite Pty Ltd (MBS) owns the copyright of the content on this website, unless otherwise stated. The courses and information

More information

Paul Dobrowsky Innovative Technology Services

Paul Dobrowsky Innovative Technology Services Significant Changes to NFPA 70E -2009 Edition Paul Dobrowsky Innovative Technology Services 2008 IEEE PCIC 1 Repeat Presentation This has been previously presented 2008 IEEE Electrical Safety Workshop

More information

Minnesota Rules, Chapter 4732 X-ray Revision PROPOSED NON-MEDICAL CABINET X-RAY SYSTEMS, 1.0

Minnesota Rules, Chapter 4732 X-ray Revision PROPOSED NON-MEDICAL CABINET X-RAY SYSTEMS, 1.0 Minnesota Rules, Chapter 4732 X-ray Revision PROPOSED NON-MEDICAL CABINET X-RAY SYSTEMS, 1.0 4732.#### NON-MEDICAL CABINET X-RAY SYSTEMS Subpart 1. Applicability. A registrant s non-medical cabinet x-ray

More information

SUBSTATION SECURITY WALL INSTALLATION MANUAL

SUBSTATION SECURITY WALL INSTALLATION MANUAL SUBSTATION SECURITY WALL INSTALLATION MANUAL JULY 26, 2016 OLDCASTLE PRECAST, INC. 3000 New McEver Rd, Acworth, Ga 30101 Substation Security Wall Installation Manual This Installation Manual is intended

More information

1/4in. SHEET PALM SANDER

1/4in. SHEET PALM SANDER 1/4in. SHEET PALM SANDER OPERATING INSTRUCTIONS SPECIFICATIONS ITEM# 151608 Voltage: Max. output: No load speed: Cord: 120V ~ 60Hz 180W 14000 RPM 6 feet (2m) Dust-Sealed On/off Switch Dust Extraction Adaptor

More information

Safe Work Method Statement SWMS 81213

Safe Work Method Statement SWMS 81213 Safe Work Method Statement SWMS 81213 This safe work method statement is generic in nature. It documents the risks and hazards associated with each step of a task and the control measures in place to minimise

More information

2015 NFPA 70E. SESHA 2015 ARIZONA MINI CONFERENCE December 10, 2015 Intel Corporation

2015 NFPA 70E. SESHA 2015 ARIZONA MINI CONFERENCE December 10, 2015 Intel Corporation 2015 NFPA 70E SESHA 2015 ARIZONA MINI CONFERENCE December 10, 2015 Intel Corporation Introduction Jeffrey A. Pugh, P.E. Pugh Engineering LLC Bachelor of Science Degrees in Electrical Engineering and Computer

More information

MONTH : December 2015 PHOTOGAPH NO: DESCRIPTION : Rebar Installation Work for 1 st Lift of permanent Manhole at MH-G2

MONTH : December 2015 PHOTOGAPH NO: DESCRIPTION : Rebar Installation Work for 1 st Lift of permanent Manhole at MH-G2 MONTH : December 2015 PHOTOGAPH NO: 000587 DESCRIPTION : Rebar Installation Work for 1 st Lift of permanent Manhole at MH-G2 MONTH : December 2015 PHOTOGRAPH NO: 000588 DESCRIPTION : Concrete Casting for

More information

Green Label Product Paints (TGL-4-R4-14)

Green Label Product Paints (TGL-4-R4-14) Green Label Product Paints (TGL-4-R4-14) Revision Approved on 24 July 2014 Thailand Environment Institute (TEI) 16/151 Muang Thong Thani, Bond Street, Bangpood, Pakkred, Nonthaburi 11120 Thailand Phone:

More information

Hand and Portable Power Tools Program

Hand and Portable Power Tools Program Hand and Portable Power Tools Program Copyright 2017 President and Fellows of Harvard University Revised September 21, 2017 Harvard University Department of Environmental Health & Safety 46 Blackstone

More information

HANDLING INSTRUCTIONS

HANDLING INSTRUCTIONS Demolition Hammer Model: XP-G55VA HANDLING INSTRUCTIONS Before using this demolition hammer, please carefully read though these HANDLING INSTRUCTIONS. Ensure that you know how the machine works, and how

More information

(SHOP NAME) Shop Safety Plan

(SHOP NAME) Shop Safety Plan (SHOP NAME) Shop Safety Plan i SHOP SAFETY PLAN TABLE OF CONTENTS 1.0 STATEMENT OF PURPOSE... 2 2.0 GENERAL SHOP INFORMATION... 3 3.0 SHOP POLICIES AND PROCEDURES... 4 4.0 INVENTORY OF SHOP EQUIPMENT...

More information

Safety Procedures Visual Arts

Safety Procedures Visual Arts Safety Procedures Visual Arts Plano Independent School District Janice Truitt, Visual Arts Coordinator Fine Arts Department Plano Independent School District 1 General Safety Procedures: Exposure to hazardous

More information

1/4 Sheet Palm Sander

1/4 Sheet Palm Sander OWNER S MANUAL Model Number: PS160CA-3 1/4 Sheet Palm Sander TM Registration Card Inside CAUTION! To reduce the risk of fire, electric shock and personal injury, read and understand the owner s manual

More information

6 FT LED Bulb - T8-36W Lumens - UL Listed - Fluorescent T8 LED Replacement/Retrofit Lamp

6 FT LED Bulb - T8-36W Lumens - UL Listed - Fluorescent T8 LED Replacement/Retrofit Lamp 6 FT LED Bulb - T8-36W - 4500 Lumens - UL Listed - Fluorescent T8 LED Replacement/Retrofit Lamp Part #: LEDT8-72-RP The Larson Electronics LEDT8-72-RP 36 watt T-series LED tube lamp is an excellent choice

More information

AUT 107 Mechanical Systems I 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name

AUT 107 Mechanical Systems I 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name Student s Signature Completion Date High School Teacher s Signature Recommended Grade High School COCC

More information

National Fire Protection Association. 1 Batterymarch Park, Quincy, MA Phone: Fax:

National Fire Protection Association. 1 Batterymarch Park, Quincy, MA Phone: Fax: National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org MEMORANDUM To: From: NFPA Technical Committee on Gas Hazards Lawrence

More information

Minnesota Rules, Chapter 4732 X-ray Revision

Minnesota Rules, Chapter 4732 X-ray Revision Minnesota Rules, Chapter 4732 X-ray Revision PROPOSED DRAFT NON-MEDICAL HAND-HELD X-RAY SYSTEMS, 1.0 4732.#### NON-MEDICAL HAND-HELD X-RAY SYSTEMS. Subpart 1. Applicability. A registrant s non-medical

More information

Grain Elevator Safety

Grain Elevator Safety Grain Elevator Safety Brad Freeman, CIH, CSP Gary Hulbert, CHMM, CSP Grain Elevator Overview Types and components of grain elevators OSHA standards Hazards associated with grain handling facilities: Engulfment

More information

Product Safety and RF Energy Exposure Booklet for Unication Two-Way Portable Radios

Product Safety and RF Energy Exposure Booklet for Unication Two-Way Portable Radios Product Safety and RF Energy Exposure Booklet for Unication Two-Way Portable Radios The information provided in this document supersedes the general safety information contained in user guides published

More information

MRS. MEYER'S CLEAN DAY SCENTED SOY CANDLE - LAVENDER SCENT

MRS. MEYER'S CLEAN DAY SCENTED SOY CANDLE - LAVENDER SCENT MRS. MEYER'S CLEAN DAY ED SOY CANDLE - LAVENDER 1. PRODUCT AND COMPANY IDENTIFICATION Product information Product name : MRS. MEYER'S CLEAN DAY ED SOY CANDLE - LAVENDER Recommended use : Candle Manufacturer,

More information

Safe work Method Statement

Safe work Method Statement Safe work Method Statement For Federal Safety Commissioner (FSC) approved companies or builders who require a high level of Safe Work Method Statements the attached SWMS is a guide only. As some FSC approved

More information

FSC 243. Fire Investigation II. Course Package

FSC 243. Fire Investigation II. Course Package 1 FSC 243 Fire Investigation II Course Package Presented and Approved May 2, 2008 2 Contact person(s) Michael Messner Date of proposal to 4/18/08 Curriculum Committee NEW COURSE PACKAGE FORM COURSE INFORMATION

More information

SECTION 5 TRANSFORMERS

SECTION 5 TRANSFORMERS SECTION 5 TRANSFORMERS Necessary transformers will be installed and maintained by The City of Aspen. The City of Aspen will not furnish transformers unless they are of standard size and voltage as established

More information

Dan Nickey. Miscellaneous Surface Coating at Area Sources: Summary of New Air Regulations & Permitting Requirements

Dan Nickey. Miscellaneous Surface Coating at Area Sources: Summary of New Air Regulations & Permitting Requirements Dan Nickey Miscellaneous Surface Coating at Area Sources: Summary of New Air Regulations & Permitting Requirements Iowa Department of Natural Resources Iowa Waste Reduction Center Iowa Collision Repair

More information

INSTALLATION GUIDE PermaTrak. Patented Product: U.S. Patent #5,906,084 #8,302,362 #8,522,505 #8,839,588 #9,096,975

INSTALLATION GUIDE PermaTrak. Patented Product: U.S. Patent #5,906,084 #8,302,362 #8,522,505 #8,839,588 #9,096,975 INSTALLATION GUIDE 2009-2017 PermaTrak. Patented Product: U.S. Patent #5,906,084 #8,302,362 #8,522,505 #8,839,588 #9,096,975 Table of Contents Project Overview Forward, Acceptability Criteria, Safety,

More information

2017 ELECTRICAL SAFETY SERVICES. Arc Flash Electrical Maintenance Lockout/Tagout And More

2017 ELECTRICAL SAFETY SERVICES. Arc Flash Electrical Maintenance Lockout/Tagout And More 2017 ELECTRICAL SAFETY SERVICES Arc Flash Electrical Maintenance Lockout/Tagout And More ABOUT LEWELLYN TECHNOLOGY Improving workplace safety since 1993 Daryn Lewellyn founded Lewellyn Technology more

More information

GVT112E & GVT112EW. Guitar Speaker Enclosures OWNER S MANUAL

GVT112E & GVT112EW. Guitar Speaker Enclosures OWNER S MANUAL GVT112E & GVT112EW OWNER S MANUAL TABLE OF CONTENTS Important Safety Instructions...2 Introduction / Special Features...3 The Rear Panel...4 Hookup Diagrams...5 Block Diagram...6 Technical Specifications

More information

Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 9

Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 9 Issue Date: Review Date: Page Number: 1 of 9 1. Hazard Management Details General Plant/Equipment Item: BISCUIT JOINER Make/Model No.: Serial No.: School: Work Location: Name of Person(s) Conducting Activity:

More information

Wall Mount Dust Collector 650 CFM Instructions

Wall Mount Dust Collector 650 CFM Instructions Wall Mount Dust Collector 650 CFM Instructions Effective Febuary 2018 Review full instruction manual prior to use for important safety information. Always check Rockler.com to confirm that you are using

More information

GENERAL POWER TOOL SAFETY WARNINGS

GENERAL POWER TOOL SAFETY WARNINGS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save

More information

FY2013 HMIT Training Level 3 Assessments

FY2013 HMIT Training Level 3 Assessments FY2013 HMIT Training Level 3 Assessments Since attending this training class, how many hazardous materials employees have you trained? How many hazardous materials employees do you expect to train in the

More information

Strands & Standards CONSTRUCTION TRADES FOUNDATION

Strands & Standards CONSTRUCTION TRADES FOUNDATION Strands & Standards CONSTRUCTION TRADES FOUNDATION COURSE DESCRIPTION A course that generally prepares individuals in the following areas: basic safety, introduction to blueprint reading, introduction

More information

Seeing beyond the surface.

Seeing beyond the surface. 3M Mining & Metallurgy Solutions 3M knows mining and metallurgy. We are committed to looking deeper and going farther. Finding solutions to meet your challenges. We are here to get you past them. Seeing

More information

BUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT

BUILDING PLANS. BUILDING INSPECTIONS DEPARTMENT BUILDING PLANS BUILDING INSPECTIONS DEPARTMENT 507-537-6773 www.ci.marshall.mn.us This handout is intended only as a guide to the subject matter covered herein and is based in part on the 2015 Minnesota

More information

SAFETY ENGINEERING SERIES, GS-0803

SAFETY ENGINEERING SERIES, GS-0803 TS-55 August 1981 General Schedule Position Classification Flysheet SAFETY ENGINEERING SERIES, GS-0803 Theodore Roosevelt Building 1900 E Street, NW Washington, DC 20415-8330 Classification Programs Division

More information

Wiring Methods, Components, and Equipment for General Use -- OSHA Standard

Wiring Methods, Components, and Equipment for General Use -- OSHA Standard ABE285 Wiring Methods, Components, and Equipment for General Use -- OSHA Standard 1910.305 1 Carol J. Lehtola, Charles M. Brown, and William J. Becker 2 The Impact of Safety on Florida Agriculture Florida

More information

SECTION PRECAST HOLLOW CORE PLANKS

SECTION PRECAST HOLLOW CORE PLANKS PART 1 GENERAL 1.1 SECTION INCLUDES A. Roof planks. B. Floor planks. C. Accessories. 1.2 RELATED REQUIREMENTS A. Division 01 General Requirements. SECTION 03 4113 PRECAST HOLLOW CORE PLANKS B. Section

More information

Breadth: Change CIP Structural Walls and Beams to Precast

Breadth: Change CIP Structural Walls and Beams to Precast Breadth: Change CIP Structural Walls and Beams to Precast Issue: One of the biggest problems facing construction companies in Richmond, Virginia is the lack of skilled labor. Currently, there are approximately

More information

PS /8 Inch Electric Drill Assembly & Operating Instructions

PS /8 Inch Electric Drill Assembly & Operating Instructions PS07216 3/8 Inch Electric Drill Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

NZQA Expiring unit standard version 3 Page 1 of 8. Operate bitumen handbar sprayer equipment, and handspray bitumen for chipseal surfacing

NZQA Expiring unit standard version 3 Page 1 of 8. Operate bitumen handbar sprayer equipment, and handspray bitumen for chipseal surfacing Page 1 of 8 Title Operate bitumen handbar sprayer equipment, and handspray bitumen for chipseal surfacing Level 3 Credits 10 Purpose This unit standard is for people working in the pavement surfacing industry.

More information

Field Instruction. Induced voltages can occur in overhead lines, underground cables, or in switchyards.

Field Instruction. Induced voltages can occur in overhead lines, underground cables, or in switchyards. 8.3 Induced Voltage Purpose The purpose of this instruction is to provide awareness of Electrostatic and Electromagnetic induced voltages and the method required to reduce or eliminate it. An induced voltage

More information

MATERIAL SAFETY DATA SHEET FOR PYRO-GUARD TREATED WOOD Meets Requirements of OSHA s 29 CFR

MATERIAL SAFETY DATA SHEET FOR PYRO-GUARD TREATED WOOD Meets Requirements of OSHA s 29 CFR MATERIAL SAFETY DATA SHEET FOR PYRO-GUARD TREATED WOOD Meets Requirements of OSHA s 29 CFR 1910.1200 Date Printed 06/97 Issued 08/93 HTWP 039 SECTION I Hoover Treated Wood Products, Inc. P.O. Box 746 Thomson,

More information

Model Curriculum. Irrigation Service Technician

Model Curriculum. Irrigation Service Technician Model Curriculum Irrigation Service Technician TABLE OF CONTENTS 1. Curriculum 04 2. Trainer Prerequisites 09 3. Annexure: Assessment Criteria 10 Irrigation Service Technician CURRICULUM / SYLLABUS This

More information

Single-Family Dwelling Submittal Requirements

Single-Family Dwelling Submittal Requirements Single-Family Dwelling Submittal Requirements The purpose of this guideline is to assist our customers in preparing for plan submittal. The items listed must be included before your plans can be accepted

More information

Premium Solar Star Greenhouse

Premium Solar Star Greenhouse Premium Solar Star Greenhouse Assembly Instructions SKU# 104901 2006 ClearSpan All rights reserved. Reproduction without permission is prohibited. Revision date: March 2006g Contact your sales representative

More information

Press Snap Soil Pipe Cutter

Press Snap Soil Pipe Cutter Press Snap Manual Press Snap Soil Pipe Cutter 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com! Read this Operator s Manual carefully

More information

CE2045-PREFABRICATED STRUCTURES QUESTION BANK

CE2045-PREFABRICATED STRUCTURES QUESTION BANK CE2045-PREFABRICATED STRUCTURES QUESTION BANK UNIT I - INTRODUCTION PART A 1. Define prefabrication 2. What are the types of prefabricates based on i. Plan area ii Based on weight 3. What are the types

More information