Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 9

Size: px
Start display at page:

Download "Title: Plant and Equipment Risk Management Form Issue Date: Review Date: Page Number: 1 of 9"

Transcription

1 Issue Date: Review Date: Page Number: 1 of 9 1. Hazard Management Details General Plant/Equipment Item: BISCUIT JOINER Make/Model No.: Serial No.: School: Work Location: Name of Person(s) Conducting Activity: Date Conducted: Description of Use: A Biscuit Joiner is a specialized woodworking tool that uses a circular saw blade to cut a crescent shaped hole in the opposite edges of two pieces of wood. An oval-shaped, wooden biscuit (hence the name biscuit join) is placed in the slot, glue is applied and the two pieces of wood are clamped together. Summary of Key Risks: (refer to appropriate subsections) Impact and cutting Electricity Slips/trips/falls Other (dust)

2 Issue Date: Review Date: Page Number: 2 of 9 2. Documentation Relevant Legislation/Standards Y / N Comments Is plant required to be registered? Is a user license required? Key reference material: AS 1473 Guarding and safe use of woodworking machinery AS4024 Safeguarding of machinery AS/NZS 3760 In service safety inspection and testing of electrical equipment AS/NZS Hand-held motor-operated electric tools - Safety - General requirements Plant Documentation Y / N Comments Are operator s manuals accessible? Is this a restricted use item? Does this item require safe use documents/test? 3. Hazard Identification ENTANGLEMENT Can anyone s hair, clothing, gloves, cleaning brushes, tools, rags or other materials become entangled with moving parts of the plant or materials?

3 Issue Date: Review Date: Page Number: 3 of 9 Impact and Cutting Injury Can anyone be crushed/cut/struck etc. due to: Material falling off the plant? Uncontrolled/unexpected movement of plant/load? Lack of capacity to slow, stop or immobilize plant? The plant tipping or rolling over? Injuries could be sustained as a result of the cutter being poorly maintained, damaged or the work piece not being secured. Make sure that work piece is securely clamped in place prior to cutting. The work piece should not be cut freehand. Make sure appropriate PPE (e.g. eye protection) is worn whilst operating equipment. Parts of the plant disintegrating or collapsing? Moderate Rare Moderate Contact with moving parts during testing, inspection, operation, maintenance, cleaning or repair? Make sure that guards are appropriately fitted prior to use. Being thrown off or under the plant? Contact with sharp or flying objects? (e.g. work pieces being ejected) The mobility of the plant? Inappropriate parts and accessories being used? Moderate Unlikely Moderate Moderate Unlikely Moderate Other

4 Issue Date: Review Date: Page Number: 4 of 9 SHEARING Can anyone s body parts be sheared between two parts of plant, or between a part of the plant and a work piece or structure? PRESSURISED CONTENT Can anyone come into contact with fluids or gases under high pressure, due to plant failure or misuse of the plant? ELECTRICITY Can anyone be injured or burnt due to: Live electrical conductors? (e.g. exposed wires) Working in close proximity to electrical conductors? Access to electricity? Damaged or frayed electrical cords would pose an electrical hazard. Operator to check for damaged electrical cords prior to use. Make sure equipment is serviced on a regular basis, tested & tagged and appropriate isolation procedures (e.g. lock out tags) are in place. Damaged or poorly maintained electrical leads, cables or switches? Water near electrical equipment? Lack of isolation procedures? Other Major Unlikely Moderate

5 Issue Date: Review Date: Page Number: 5 of 9 ERGONOMICS Can anyone be injured due to: Poorly designed workstation? Repetitive body movement? Constrained body posture or the need for excessive effort? Design deficiency causing psychological stress? Inadequate or poorly placed lighting? Does the plant impact on the surrounding workplace and create potential hazards? (Consider safe access and egress from plant, workflow and design of the workplace) Is the location of the plant inappropriate? (Consider potential affects due to environmental conditions and terrain) Other

6 Issue Date: Review Date: Page Number: 6 of 9 RADIATION Can anyone using the plant, or in the vicinity of the Plant suffer injury or illness due to exposure to radiation in the form of any of the following: infra-red radiation ultra violet light microwaves NOISE Can anyone using the plant, or in the vicinity of the plant, suffer injury due to exposure to noise? VIBRATION Can anyone be injured or suffer ill-health from exposure to vibration? FRICTION Can anyone be burnt due to contact with moving parts, materials or surfaces of the plant? SUFFOCATION Can anyone be suffocated due to lack of oxygen, or atmospheric contamination? CONDITION Is a hazard likely due to the age and condition of the plant? (Consider how hard the machine has been worked, and whether it is used constantly or rarely). Can anyone be injured as a result of the plant not serviced appropriately and/or maintained in line with manufacturer s recommendations?

7 Issue Date: Review Date: Page Number: 7 of 9 SLIPS/TRIPS/FALLS Can anyone using the plant, or in the vicinity of the plant, slip, trip or fall due to: Uneven, slippery or steep work surfaces? Poor housekeeping, e.g. spillage in the vicinity? Obstacles being placed in the vicinity of the plant? Inappropriate or poorly maintained floor or walking surfaces (i.e. lack of a slip-resistant surface, unprotected holes, penetrations or gaps?) If operating or maintaining plant at height can anyone slip, trip or fall due to: Use of work platforms, stairs or ladders? Minor Possible Moderate Minor Possible Moderate Poor housekeeping allowing the build up of waste materials or failure to immediately clean up spills could result in a slip hazard. Inappropriate placement of objects (e.g. spare materials, bags etc) in the immediate vicinity of the plant equipment may result in a trip hazard. Make sure appropriate cleaning & housekeeping standards are maintained at all times to minimise the risk of a slip, trip or fall. Lack of guardrails or other suitable edge protection? Other

8 Issue Date: Review Date: Page Number: 8 of 9 FIRE AND EXPLOSION Can anyone be injured by fire? Can anyone be injured by explosion of gases, vapours, liquids, dusts, or other substances? TEMPERATURE/MOISTURE Can anyone come into contact with objects at high or low temperatures? Can anyone suffer ill-health due to exposure to high or low temperatures? Can anyone be injured or suffer ill-health due to exposure to moisture? OTHER Can anyone be injured or suffer ill-health from exposure to: Chemicals? Toxic gases or vapours? Dust generated from the work process may be hazardous to health. Make sure good housekeeping practices are maintained. Fumes/Dusts? Minor Unlikely Low Other? (please specify) 4. Risk Assessment Signoff Authorised By: Signature: Date:

9 Issue Date: Review Date: Page Number: 9 of 9

Tasks Risk Suggested controls

Tasks Risk Suggested controls Risk Assessment Name Shane Date 1/10/09 Equipment or work process being assessed Crosscutting logs in the log yard 1. Pinch points and crush injuries A. Are there any exposed or unguarded moving parts

More information

D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL

D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL 8-11-11 General Machinery Safety Instructions Machinery House requires you to read this entire Manual before using this

More information

Safe use of meat bandsaws

Safe use of meat bandsaws Guidance note Safe use of meat bandsaws This information sheet provides practical advice for employers about controlling hazards while using meat bandsaws. February 2011 Background Meat bandsaws are commonly

More information

Tools Hand and Power. OSHA Office of Training and Education 1

Tools Hand and Power. OSHA Office of Training and Education 1 Tools Hand and Power 1 Hazards Workers using hand and power tools may be exposed to these hazards: objects that fall, fly, are abrasive, or splash harmful dusts, fumes, mists, vapors, and gases frayed

More information

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size

ATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880

More information

Table I given below highlights the potential harm associated with these hazards and its control measures: Table I Sl No. Hazards Harm Controls

Table I given below highlights the potential harm associated with these hazards and its control measures: Table I Sl No. Hazards Harm Controls Research Paper MAKING TABLE MOUNTED CIRCULAR SAW OPERATIONS SAFER IN CONSTRUCTION INDUSTRY: A PRACTICAL APPROACH Krishna Nirmalya Sen 1, Dr R.K Elangovan 2 Dr Shrihari 3, Dr Nihal Anwar Siddiqui 3 Address

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

Wall Mount Dust Collector 650 CFM Instructions

Wall Mount Dust Collector 650 CFM Instructions Wall Mount Dust Collector 650 CFM Instructions Effective Febuary 2018 Review full instruction manual prior to use for important safety information. Always check Rockler.com to confirm that you are using

More information

Operators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series

Operators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series Operators Manual: Diamond Rock Saw Excavator Attachment Austramac Flashcut Series! WARNING! Inappropriate use of rock saw may cause serious injury or death. Operators must read this manual before use and

More information

Portable circular saw Used to cut a wide range of construction materials Check the cord, leads and 3 pin plugs for any damage. A Residual Current Device (RCD) is plugged into the power source. Do not stand

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module. Equipment mostly used by the. Selected trainees would

More information

Safe use of metal turning lathes

Safe use of metal turning lathes Guidance Note Guidance Note Safe use of metal turning lathes Safe use of metal turning lathes This information sheet and table provide practical advice to employers about controlling hazards while using

More information

Dust Collector. Model No: DC2200 (FM300S)

Dust Collector. Model No: DC2200 (FM300S) Dust Collector Model No: DC2200 (FM300S) GENERAL SAFETY INSTRUCTIONS Before attempting to operate this machine, it is important that you read, understand and follow these instructions very carefully. They

More information

Safe use of metal turning lathes

Safe use of metal turning lathes Guidance Note Safe use of metal turning lathes This information sheet and table provide practical advice to employers about controlling hazards while using metal turning lathes. June 2017 Background Metal

More information

Operating Manual 6 Industrial Bench Grinder ATBG280/

Operating Manual 6 Industrial Bench Grinder ATBG280/ Operating Manual 6 Industrial Bench Grinder ATBG280/6 804531 40 Year Australian Heritage The reputable name in bench grinders for 40 years Protect yourself and others by observing all safety information,

More information

LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM

LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM LOS ANGELES UNIFIED SCHOOL DISTRICT DIVISION OF ADULT AND CAREER EDUCATION SAFETY TEST FOR MACHINIST PROGRAM School: Industry Sector: Manufacturing & Product Dev. Class: Date: Teacher: Room: (Please Print)

More information

How to use a bow saw Muddy Faces Ltd

How to use a bow saw Muddy Faces Ltd How to use a bow saw Muddy Faces Ltd This card gives guidelines on how to introduce and use bow saws safely with a group aged 8 yrs +. The following process may be split up over a number of sessions or

More information

Home Workshop System WARNING. MARK V Model 500. Summary Manual. Designed and Built in Dayton, Ohio.

Home Workshop System WARNING. MARK V Model 500. Summary Manual. Designed and Built in Dayton, Ohio. Shopsmith Mark V Home Workshop System MARK V Model 500 Summary Manual Designed and Built in Dayton, Ohio. WARNING Read the SAFETY information in the Introduction section and complete the ASSEMBLY AND ALIGNMENT

More information

POTENTIAL HEALTH & SAFETY HAZARDS

POTENTIAL HEALTH & SAFETY HAZARDS Number: OH&S 18.32.1 Revision Date: 03/12/2014 Radial Arm Saw Safety 1. PURPOSE 1.1. To provide operational guidelines on the safe use of Radial Arm Saws found in woodworking shops at Thompson Rivers University

More information

GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

High Speed Drill MODEL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

High Speed Drill MODEL WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH High Speed Drill MODEL 6501 003002 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill DS402 05402 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DS402 Capacities Steel 3 mm Wood

More information

12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max)

12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max) 1 1 2 2 3 3 82mm (Max) 12mm (Max) 12mm (Max) 6mm (Max) 4 4 5 6 8 6mm (Max) 0.5 0mm 1 5 6 7 7 8 9 9 A = B 10 11 12 D B 1 13 14 15 0 C A D E 16 17 18 F G D B N H J G I K 19 A 20 G L 21 C K 1mm L M 1mm 22

More information

UNIVERSAL WORKSTATION

UNIVERSAL WORKSTATION ASSEMBLY AND OPERATING INSTRUCTIONS UNIVERSAL WORKSTATION FOX Model F50-179 1 Universal Workstation FOX MODEL F50-179 TABLE OF CONTENTS Safety instructions Page 3 Specific safety instructions for workbenches..

More information

Forename: Surname: School / College/ Institution. Course date: / / RDTHSC:

Forename: Surname: School / College/ Institution. Course date: / / RDTHSC: Specialist Extension Level S8HS Forename: Surname: School / College/ Institution Course date: / / RDTHSC: These Training and Accreditation Guidelines are based on the following essential publications:

More information

Health and Safety Training in Design and Technology Design and Technology Association Specialist Extension Level S8HS Planer/Thicknesser Machines

Health and Safety Training in Design and Technology Design and Technology Association Specialist Extension Level S8HS Planer/Thicknesser Machines Specialist Extension Level S8HS Forename: Surname: School / College/ Institution Course date: / / These Training and Accreditation Guidelines are based on the following essential publications: Health and

More information

1/4in. SHEET PALM SANDER

1/4in. SHEET PALM SANDER 1/4in. SHEET PALM SANDER OPERATING INSTRUCTIONS SPECIFICATIONS ITEM# 151608 Voltage: Max. output: No load speed: Cord: 120V ~ 60Hz 180W 14000 RPM 6 feet (2m) Dust-Sealed On/off Switch Dust Extraction Adaptor

More information

SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.

SAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees. SAFETY DIRECTIVE Title: Hand and Power Tools Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This

More information

Safeguarding Machinery

Safeguarding Machinery Safeguarding Machinery Safeguards are essential for protecting workers from preventable injuries caused by moving machine parts. Any machine part, function, or process that may cause injury must be safeguarded.

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Current Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module.

More information

ANGLE GRINDER STAND USER GUIDE AFTER SALES SUPPORT

ANGLE GRINDER STAND USER GUIDE AFTER SALES SUPPORT ANGLE GRINDER STAND USER GUIDE Important: retain for future reference - please read carefully. Now you have purchased a WORKZONE product you can rest assured in the knowledge that as well as your 1 year

More information

SAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E

SAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E SAFETY AND OPERATING MANUAL 2 PRODUCT SAFETY GENERAL Power Tool Safety Warnings WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or

More information

SHOP SAFETY AND TRAINING IN ACADEMIC DEPARTMENTS

SHOP SAFETY AND TRAINING IN ACADEMIC DEPARTMENTS Page 1 of 6 SHOP AND TRAINING IN ACADEMIC DEPARTMENTS 1. All students and employees (staff and faculty) are required to complete documented safety training prior to using any machines or power tools in

More information

Hazard Identification and Risk Assessment Form. Risk Assessment

Hazard Identification and Risk Assessment Form. Risk Assessment Identification and Assessment Form Assessment Current Tool & Machine Work General Various injuries (including potential fatalities) All staff complete safety induction programme at the start of the module.

More information

MULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS

MULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS MULTI-PURPOSE SAW 500watt MODEL NO. OZMPS500A OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS - MODEL NO. OZMPS500A Motor: Input: No load speed: Length of stroke:

More information

GENERAL OPERATIONAL PRECAUTIONS

GENERAL OPERATIONAL PRECAUTIONS GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

Manufacture of wooden furniture

Manufacture of wooden furniture Manufacturing intelligence: Manufacture of wooden furniture Helping brokers protect clients standards Manufacturing Processes We know that your clients take risk management seriously and that it plays

More information

SAFE OPERATING PROCEDURE KEY CUTTING MACHINE - Manual (Generic)

SAFE OPERATING PROCEDURE KEY CUTTING MACHINE - Manual (Generic) SAFE OPERATING PROCEDURE KEY CUTTING MACHINE - Manual (Generic) DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission. PERSONAL PROTECTIVE EQUIPMENT

More information

MINI RECIPROCATING SAW MODEL NO: CRS350M

MINI RECIPROCATING SAW MODEL NO: CRS350M CRS350M - Mini Reciprocating saw.fm Page 1 Thursday, November 22, 2012 9:41 AM MINI RECIPROCATING SAW MODEL NO: CRS350M PART NO: 6462550 OPERATION & MAINTENANCE INSTRUCTIONS LS1112 CRS350M - Mini Reciprocating

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Shear Wrench 6922NB DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Shear Wrench 69NB 00498 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 69NB Bolt size M6, M0, M

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire

More information

Forename: Surname: School / College/ Institution. Course date: / / RDTHSC:

Forename: Surname: School / College/ Institution. Course date: / / RDTHSC: Specialist Extension Level S1HS Forename: Surname: School / College/ Institution Course date: / / RDTHSC: These Training and Accreditation Guidelines are based on the following essential publications:

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL Impact drill WX317 WX318 1 3 2 8 7 6 5 4 A1 A2 B C1 2 1 3 3 1 D C2 5 4 E F 2 E F 1 G 4 2 H 1. Keyless Chuck 2. Depth gauge 3. Drill/hammer drill function selector 4. Switch

More information

Tuck tie in shirt, roll up sleeves, wear protective apron or lab. coat. High risk

Tuck tie in shirt, roll up sleeves, wear protective apron or lab. coat. High risk Risk Assessment Exercises The table below lists some typical D&T activities and the risks involved in carrying them out. Assess each activity as either a high risk, low risk or no risk activity and state

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Curved Planer 00BA 0059 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 00BA Planing width 0 mm Planing

More information

Select Language. Metal Lathe. Risks & Hazards Hazard Control PPE General Safety Operating Safety Maintenance Safe Work Zones Operating Procedures

Select Language. Metal Lathe. Risks & Hazards Hazard Control PPE General Safety Operating Safety Maintenance Safe Work Zones Operating Procedures Metal Lathe Select Language Risks & Hazards Hazard Control PPE General Safety Operating Safety Maintenance Safe Work Zones Operating Procedures The information contained in this SOP is general in nature.

More information

Impact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Impact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Impact Wrench MODEL TW000 00605 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Table Saw Small Parts Sled Instructions

Table Saw Small Parts Sled Instructions Table Saw Small Parts Sled Instructions Effective May 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most

More information

Angle Grinder MODEL 9553B MODEL 9555B

Angle Grinder MODEL 9553B MODEL 9555B ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

Impact Wrench MODEL 6905B MODEL 6906

Impact Wrench MODEL 6905B MODEL 6906 ENGLISH Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

HAND AND POWER TOOLS

HAND AND POWER TOOLS USA office: 511 Avenue of America s, # 601, New York, NY 10011 Canada office: 655-32 nd Avenue, Suite 201, Lachine, QC., Canada, H8T 3G6 tel.: 514 634 3434 - fax: 514 634 9736 All PFI Standards and Best

More information

College of Forestry 610: Power Tools

College of Forestry 610: Power Tools College of Forestry 610: Power Tools Safety Policy & Procedure Manual Section 600: Workshops and Shop Tools Effective: 01 January 2007 Revised: August 2014 PURPOSE The purpose of this section is to provide

More information

Drill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE.

Drill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 6411 6412 6413 007894 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Circular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE

PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE 92778 1 GENERAL SAFETY INFORMATION For your safety, please read these instructions carefully before use and keep them in the

More information

Safe Work Method Statement SWMS 81213

Safe Work Method Statement SWMS 81213 Safe Work Method Statement SWMS 81213 This safe work method statement is generic in nature. It documents the risks and hazards associated with each step of a task and the control measures in place to minimise

More information

Recipro Saw MODEL JR3000V. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Recipro Saw MODEL JR3000V. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Recipro Saw MODEL JR3000V 00477 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Impact Wrench. 19 mm (3/4 ) MODEL 6906

Impact Wrench. 19 mm (3/4 ) MODEL 6906 Impact Wrench 9 mm (3/4 ) MODEL 6906 002290 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

More information

Health and Safety Training in Design and Technology Design and Technology Association Specialist Extension Level S7HS Wood Turning Lathe

Health and Safety Training in Design and Technology Design and Technology Association Specialist Extension Level S7HS Wood Turning Lathe Specialist Extension Level S7HS Forename: Surname: School / College/ Institution Course date: / / These Training and Accreditation Guidelines are based on the following essential publications: Health and

More information

Angle Drill MODEL DA3000R MODEL DA3000V

Angle Drill MODEL DA3000R MODEL DA3000V ENGLISH Angle Drill MODEL DA3000R MODEL DA3000V 003004 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR

More information

Drill MODEL 6013B MODEL 6013BR. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Drill MODEL 6013B MODEL 6013BR. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH Drill MODEL 6013B MODEL 6013BR 004618 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 64 642 643 007894 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 64 642 643 Capacities Steel

More information

SAFETY AND OPERATING MANUAL

SAFETY AND OPERATING MANUAL SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J

More information

BB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.

BB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. BB07552 5 Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

Date 1/29/16 Revised. I. Wood Lathe Safety Policy PURPOSE

Date 1/29/16 Revised. I. Wood Lathe Safety Policy PURPOSE Date 1/29/16 Revised I. Wood Lathe Safety Policy PURPOSE The purpose of this policy is to help employers provide a safe and healthful workplace. The guide describes the principal hazards of woodworking

More information

Circular Saw M583 INSTRUCTION MANUAL

Circular Saw M583 INSTRUCTION MANUAL ENGLISH INSTRUCTION MANUAL Circular Saw M583 005337 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. ENGLISH SPECIFICATIONS

More information

Handling instructions

Handling instructions Hand Shear Model CE 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that

More information

Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850.

Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850. Operator s manual Manual d utilisation Manual de instrucciones Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850. GB English FR ES

More information

Agricultural Mechanics and Technology Power Tool Safety Rules

Agricultural Mechanics and Technology Power Tool Safety Rules Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust

More information

SDS4-800 HAMMER DRILL. Instruction Manual. Read instructions before operating this tool. 01/03/

SDS4-800 HAMMER DRILL. Instruction Manual. Read instructions before operating this tool. 01/03/ Instruction Manual Read instructions before operating this tool. 01/03/2016 FIG 1 FIG 2 TABLE OF CONTENTS TABLE OF CONTENTS IMPORTANT EC - Declaration of Conformity Important Information 12 Month Limited

More information

STUDENT/FACULTY MACHINE SHOP SAFETY RULES

STUDENT/FACULTY MACHINE SHOP SAFETY RULES STUDENT/FACULTY MACHINE SHOP SAFETY RULES Supervisors have full authority over the shop and its safe use, including the responsibility, authority, and obligation to prohibit shop or tool access for the

More information

Safety Procedures Visual Arts

Safety Procedures Visual Arts Safety Procedures Visual Arts Plano Independent School District Janice Truitt, Visual Arts Coordinator Fine Arts Department Plano Independent School District 1 General Safety Procedures: Exposure to hazardous

More information

INSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4 SIOUX RIVET HAMMERS (SERIAL D)

INSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4 SIOUX RIVET HAMMERS (SERIAL D) Form Z489 Date 2009August8/C Page 1 of 4 INSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4 SIOUX RIVET HAMMERS (SERIAL D) Read and understand these instructions before operating this tool. SAVE THESE

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Drill MT600 MT60 003635 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT600 MT60 Capacities Steel

More information

ENGLISH (Original instructions) INSTRUCTION MANUAL. Recipro Saw JR3050T DOUBLE INSULATION. IMPORTANT: Read Before Using.

ENGLISH (Original instructions) INSTRUCTION MANUAL. Recipro Saw JR3050T DOUBLE INSULATION. IMPORTANT: Read Before Using. ENGLISH (Original instructions) INSTRUCTION MANUAL Recipro Saw JR3050T 005783 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model JR3050T Length of stroke

More information

Power Planer 1900B/N1900B/1902

Power Planer 1900B/N1900B/1902 Power Planer 1900B N1900B 1902 SPECIFICATIONS Model 1900B/N1900B/1902 Planing width... 82 mm Planing depth... 1 mm Shiplapping depth... 9 mm No load speed (min -1 )...16,000 Overall length... 290 mm Net

More information

OPERATOR S MANUAL FOR MODEL BLADE GRINDER

OPERATOR S MANUAL FOR MODEL BLADE GRINDER OPERATOR S MANUAL FOR MODEL 88-021 BLADE GRINDER Table of Contents Page Blade Grinder Safety and User Instructions 2 Unpacking the Grinder 5 Assembling the grinder 6 Adjusting the grinding angle 8 Adjusting

More information

1/4 Sheet Palm Sander

1/4 Sheet Palm Sander OWNER S MANUAL Model Number: PS160CA-3 1/4 Sheet Palm Sander TM Registration Card Inside CAUTION! To reduce the risk of fire, electric shock and personal injury, read and understand the owner s manual

More information

Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) Operator s manual Manual d utalisation Manual de instrucciones

Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) Operator s manual Manual d utalisation Manual de instrucciones HÄcksaxtillsats HA110 HA850 Jonsered Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) GB FR ES Operator s manual Manual d utalisation Manual de instrucciones KEY TO SYMBOLS

More information

transportable cutting and shaping machines in the workplace

transportable cutting and shaping machines in the workplace Unit Update D/503/2408: SETTING UP AND USING TRANSPORTABLE CUTTING AND SHAPING MACHINES IN THE WORKPLACE U s e f r o m 2 0 1 2 J a n u a r y This version of this unit replaces all previously published

More information

HAND AND POWER TOOLS

HAND AND POWER TOOLS HAND AND POWER TOOLS Steingass Mechanical Contracting, Inc. 754 Progress Drive Medina, Ohio 44256 (330) 725-6090 HAND AND POWER TOOLS General All power tools whether furnished by Steingass Mechanical Contracting,

More information

Before use please read & understand this manual, paying particular attention to the safety instructions.

Before use please read & understand this manual, paying particular attention to the safety instructions. OPERATOR S MANUAL AND PARTS LIST 12 HAND PUSH ROLLER MOWER - THHMR Sales & Helpline 01793 333220 www.thehandy.co.uk Before use please read & understand this manual, paying particular attention to the safety

More information

OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE

OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE 1 CONTENTS Safety 3 Labels 5 Quick Guide 6 In Depth Instructions 8 Operating Instructions 12

More information

HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy

HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy HABITAT FOR HUMANITY WORK CREW SAFETY: Construction Safety Policy INTRODUCTION Safety is everybody's concern and is always an important consideration at any construction site. Building construction is

More information

(SHOP NAME) Shop Safety Plan

(SHOP NAME) Shop Safety Plan (SHOP NAME) Shop Safety Plan i SHOP SAFETY PLAN TABLE OF CONTENTS 1.0 STATEMENT OF PURPOSE... 2 2.0 GENERAL SHOP INFORMATION... 3 3.0 SHOP POLICIES AND PROCEDURES... 4 4.0 INVENTORY OF SHOP EQUIPMENT...

More information

12 SHEAR, PRESS BRAKE &SLIPROLL

12 SHEAR, PRESS BRAKE &SLIPROLL 12 SHEAR, PRESS BRAKE &SLIPROLL OPERATION MANUAL SPECIFICATION Cpacity: Roller : Die set sizes: Weight: 1mm thick (20gauge), 305 mm (12 ) width 38mm(1-1/2 ) 101.6mm(4 ), 76.2mm(3 ), 50.8mm (x2)[2 9x2]],

More information

Mill Safety Competencies

Mill Safety Competencies Mill Safety Competencies The following list of competencies is presented to ensure the contents of a training program from a perspective of safety. Additional instruction in actual tool use would augment

More information

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER

GENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.

More information

Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850

Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850 Operator s manual Manual d utalisation Manual de instrucciones Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850 GB FR ES KEY TO SYMBOLS

More information

Introduction to Carpentry Power Tools

Introduction to Carpentry Power Tools Youth Explore Trades Skills Introduction to Carpentry Power Tools Description s use power tools every day, and the ability to use these tools correctly and safely is paramount. In this Activity Plan, students

More information

Power Planer JCB-PP1050

Power Planer JCB-PP1050 Safety and operating manual Power Planer JCB-PP1050 ORIGINAL INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and

More information

Instruction Manual DETAIL SANDER. Model SROM Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools.

Instruction Manual DETAIL SANDER. Model SROM Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Instruction Manual DETAIL SANDER Model SROM 1187 Our tool range has you covered for DIY. Whatever the job, make light work of it with MAKO tools. Product Features: 1. On/Off Switch 2. Base Pad 3. Dust

More information

Surface planer or buzzer. Performs the tasks of dressing, squaring and straightening timber Machining short lengths of timber. Without the bridge guard. Without the appropriate training. Without PPE. Set

More information

MAKER LAB Safety Instructions Power Tool Training

MAKER LAB Safety Instructions Power Tool Training MAKER LAB Safety Instructions Power Tool Training Note: All the instructions from Basic Training apply to Power Tool Training. If you have not completed Basic Training, do so before you complete Power

More information

Safe Operating Procedure ELECTRIC DRILL

Safe Operating Procedure ELECTRIC DRILL Safe Operating Procedure ELECTRIC DRILL DO NOT use this equipment unless you have been instructed in its safe use and operation and given prior permission. PERSONAL PROTECTIVE EQUIPMENT OPERATIONAL SAFETY

More information

Machine Guarding. OSHA Office of Training and Education 1

Machine Guarding. OSHA Office of Training and Education 1 Machine Guarding OSHA Office of Training and Education 1 Introduction Crushed hands and arms, severed fingers, blindness - the list of possible machinery-related injuries is as long as it is horrifying.

More information

Injuries involving Angle Grinders

Injuries involving Angle Grinders Injuries involving Angle Grinders During the month of July, we experienced another two incidents at Mondi operations related to the use of an angle grinders. Fortunately, in both instances the operators

More information

Handling instructions

Handling instructions Orbital Sander Model SV 12SG Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended

More information

Operating and Maintenance Instructions Keep for future reference

Operating and Maintenance Instructions Keep for future reference Operating and Maintenance Instructions Keep for future reference TM400 Log Splitter 1 Index SAFETY... 3 LABELS.... 4 QUICK GUIDE including storage and transport... 5 IN-DEPTH INSTRUCTIONS.... 6 OPERATING

More information

POTENTIAL HEALTH & SAFETY HAZARDS

POTENTIAL HEALTH & SAFETY HAZARDS Number: OH&S 18.48.1 Revision Date: 01/14/2015 Safe Operating Procedures for RIDGID 535 1. PURPOSE 1.1. To provide operational guidelines on the safe us of the RIGID 535 Pipe Threader used in the Trades

More information