GLASS INFILL HOLDERS 3
|
|
- Stephen Gregory
- 6 years ago
- Views:
Transcription
1 GLASS INFILL HOLDERS 3
2 COMINE GLASS AND SEEL O CREAE HE MOS EAUIFUL ALUSRADES If you are combining glass and steel, you can choose from our wide range of glass fixings, with stainless steel glass clamp and glass adapter options available to fit every railing project imaginable. Of course, regardless of how attractive the glass infill holders are, the primary purpose of railings is safety. We are committed to meeting all of the stringent safety requirements and legislation in our field for every product we sell. In pursuit of these requirements, we successfully focus a great deal of attention on the safety and quality of our products. hat is one of the reasons why thousands of professionals choose the products offered by Q-railing. For greater safety, work with DIN EN approved glass clamps Stainless steel and glass constructions are trademarks of modern architecture. However, it s no paradox that a material as fragile as glass can meet today s strict building code requirements. Q-railing glass clamps are absolutely secure and comply with DIN EN 12600, the German Industry Norm for impact safety. In the pendulum test required for DIN EN compliance, both the glass clamps and the glass are tested according to the DIN EN norm. his test uses a 110 pound pendulum that simulates the force of a person falling onto the glass. he combination of glass clamps DIN " 60" 18" and glass prevent the person from falling through. All Q-railing glass clamps for glass thicknesses starting from 5/16 (8.0 mm) comply with this strict German safety standard. 110 lbs he test results as well as the recommended glass dimensions can be found on the following pages. (Indoor tests: echnical University of Munich. Outdoor tests: German-approved esting Laboratory, Dr. Ronald Ondra and LGA Nurnberg.) he test results required constitute the highest standards in German technical approval. he advantages of Q-railing s glass clamps All glass clamps are DIN EN certified and grip the glass with immense strength All glass clamps can be used with glass of a width of up to 5.3 feet All glass clamps have been successfully tested with tempered and laminated glass as well as for indoor and outdoor applications Fascia mount? Safety first! Use: or ( 169) (MOD 24) 146
3 INDEX GLASS INFILL HOLDERS Glass clamps Glass adapters Spider Glass adapters Ø 1-3/16" (30 mm) Glass adapters Ø 1-15/16" (50 mm) Glass clamps MOD /64" (6 mm) 5/16" (8 mm) MOD /64" (6 mm) 5/16" (8 mm) 3/8" (10 mm) MOD /64" (6 mm) 5/16" (8 mm) 3/8" (10 mm) MOD /2" (12 mm) MOD /2" (12 mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /64" (6 mm) 5/16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD 51/ /2" (12 mm) MOD /4" (6.76 mm) MOD /4" (6.76 mm) 5/16" (8.76 mm) MOD /4" (6.76 mm) 5/16" (8.76 mm) MOD /2" (12.76 mm) 9/16" (13.52 mm) 5/8" (16.76 mm) 11/16" (17.52 mm) MOD /8" (10.76 mm) 1/2" (12.76 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) MOD /4" (6.76 mm) 5/16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) MOD 51/ Glass thickness inches (mm) Glass adapters Glass thickness (mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /64" (6 mm) 5/16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) MOD /4" (6.76 mm) 5/16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) 5/8" (16.76 mm) MOD /16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 9/16" (13.52 mm) 5/8" (16.76 mm) 11/16" (17.52 mm) 147
4 Glass clamps - DIN est results MOD 20 / 21 / 22 / 24 / 25 / 26 est setup Dimensions (mm) min. max. Glass width 19.7" (500 mm) see table h3 h1 Glass thickness see table see table H H Glass height 31.5" (800 mm) 39.4" (1000 mm) h1 Handrail - top glass panel 4/10" (10 mm) 1.9" (50 mm) without edge protection 4.7" (120 mm) with edge protection h4 h2 h2 Floor - bottom glass panel 4/10" (10 mm) 1.9" (50 mm) without edge protection 4.7" (120 mm) with edge protection op glass panel - h3 upper glass clamp 4" (100 mm) 5.9" (150 mm) Lower glass clamp h4 bottom glass panel 4" (100 mm) 5.9" (150 mm) INDOOR Glass clamps without security pin and without security plate. MOD 20 (38.1 mm) (glass thickness) max empered glass 5/16" (8 mm) 19.7"-47.2" ( mm) MOD 21 (38.1 mm) (glass thickness) max 5/16" (8.76 mm) 19.7"-47.2" ( mm) MOD 22 (38.1 mm) (50.8 mm) empered glass (glass thickness) 5/16" (8.76 mm) 5/16" (8 mm) 3/8" (10 mm) max 19.7"-59.1" ( mm) 19.7"-59.1" ( mm) MOD 24 (38.1 mm) (50.8 mm) empered glass (glass thickness) 1/2" (12.76 mm) 11/16" (17.52 mm) 1/2" (12.76 mm) 11/16" (17.52 mm) 1/2" (12 mm) 1/2" (16 mm) max 19.7"-59.1" ( mm) 19.7"-63" ( mm) 19.7"-63" ( mm) MOD 25 (38.1 mm) (50.8 mm) empered glass (glass thickness) 3/8" (10.76 mm) 1/2" (12.76 mm) 1/2" (12 mm) max 19.7"-59.1" ( mm) 19.7"-59.1" ( mm) 148 MOD 26 (38.1 mm) (50.8 mm) empered glass (glass thickness) 5/16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 5/16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) max 19.7"-55.1" ( mm) 19.7"-63" ( mm) 19.7"-55.1" ( mm) 19.7"-63" ( mm)
5 OUDOOR MOD 22 (38.1 mm) (50.8 mm) MOD 25 (38.1 mm) (50.8 mm) MOD 26 (38.1 mm) (50.8 mm) Possible glass width for outdoor use depending on wind factor, glass type and glass thickness without security pin and without security plate. (glass thickness) (glass thickness) Height Situation F empered glass (ft) (psf) 5/16" (8.76 mm) 5/16" (8 mm) 3/8" (10 mm) 328 Corner " (800 mm) 31.5" (800 mm) 65 Corner " (500 mm) 39.4" (1000 mm) 55.1" (1400 mm) 328 Normal " (500 mm) 39.4" (1000 mm) 55.1" (1400 mm) 65 Normal max 31.5" (800 mm) 55.1" (1400 mm) 59.1" (1500 mm) 26 Corner " (1000 mm) 55.1" (1400 mm) 59.1" (1500 mm) 26 Normal " (1200 mm) 59.1" (1500 mm) 59.1" (1500 mm) Height Situation F empered glass (ft) (psf) 3/8" (10.76 mm) 1/2" (12.76 mm) 1/2" (12 mm) 328 Corner " (800 mm) 31.5" (800 mm) 55.1" (1400 mm) 65 Corner " (800 mm) 47.2" (1200 mm) 59.1" (1500 mm) 328 Normal " (800 mm) 47.2" (1200 mm) 59.1" (1500 mm) 65 Normal max 47.2" (1200 mm) 55.1" (1400 mm) 59.1" (1500 mm) 26 Corner " (1200 mm) 59.1" (1500 mm) 59.1" (1500 mm) 26 Normal " (1500 mm) 59.1" (1500 mm) 59.1" (1500 mm) Height Situation F empered glass (ft) (psf) 5/16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 5/16" (8 mm) 3/8" (10 mm) 1/2" (12 mm) 328 Corner " (500 mm) 31.5" (800 mm) 31.5" (800 mm) 31.5" (800 mm) 39.4" (1000 mm) 55.1" (1400 mm) 65 Corner " (800 mm) 31.5" (800 mm) 39.4" (1000 mm) 39.4" (1000 mm) 55.1" (1400 mm) 55.1" (1400 mm) 328 Normal " (800 mm) 39.4" (1000 mm) 47.2" (1200 mm) 47.2" (1200 mm) 55.1" (1400 mm) 55.1" (1400 mm) 65 Normal max 31.5" (800 mm) 39.4" (1000 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 26 Corner " (800 mm) 47.2" (1200 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 26 Normal " (1200 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) (glass thickness) 149
6 Glass clamps - DIN est results MOD 25 est setup Dimensions (mm) min. (mm) max. (mm) h3 h1 Glass width 19.7" (500 mm) see table H With security pin (4x) Glass thickness see table see table H Glass height 31.5" (800 mm) 39.4" (1000 mm) h4 h2 h1 h2 Handrail - top glass panel Floor - bottom glass panel 4/10" (10 mm) 4/10" (10 mm) 1.9" (50 mm) without edge protection 4.7" (120 mm) with edge protection 1.9" (50 mm) without edge protection 4.7" (120 mm) with edge protection op glass panel - h3 upper glass clamp 5.9" (150 mm) 5.9" (150 mm) Lower glass clamp h4 bottom glass panel 5.9" (150 mm) 5.9" (150 mm) INDOOR Glass clamps with security pin, without security plate. MOD 25 (38.1 mm) (50.8 mm) (glass thickness) max 1/2" (12.76 mm) 19.7"-63" ( mm) OUDOOR Possible width of glass for outdoor use depending on wind factor, glass type and glass thickness with security pin, without security plate. MOD 25 (38.1 mm) (50.8 mm) Height Situation F (ft) (psf) (glass thickness) 1/2" (12.76 mm) 328 Corner " (800 mm) 65 Corner " (1000 mm) 328 Normal " (1000 mm) 65 Normal max 55.1" (1400 mm) 26 Corner " (1400 mm) 26 Normal " (1600 mm) 150 We have designed different glass clamps for tempered and for laminated glass. his guarantees the best clamping results on glass panels. Q-railing, we make the difference!
7 Glass clamps - DIN est results MOD 26 est setup Dimensions (mm) min. max. h3 h1 Glass width 19.7" (500 mm) see table With security plate (2x) Glass thickness see table see table H H Glass height 31.5" (800 mm) 39.4" (1000 mm) h4 h2 h1 Handrail - top glass panel 4/10" (10 mm) 1.9" (50 mm) without edge protection 4.7" (120 mm) with edge protection h2 Floor - bottom glass panel 4/10" (10 mm) 1.9" (50 mm) without edge protection 4.7" (120 mm) with edge protection op glass panel - h3 upper glass clamp 4" (100 mm) 5.9" (150 mm) Lower glass clamp h4 bottom glass panel 7/8" (MOD 26) 7/8" (MOD 26) INDOOR Glass clamps without security pin, with security plate. MOD 26 (38.1 mm) (50.8 mm) (glass thickness) 5/16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 5/16" (8 mm) empered glass 3/8" (10 mm) max 19.7"-55.1" ( mm) 19.7"-55.1" ( mm) 1/2" (12 mm) OUDOOR Possible width of glass for outdoor use depending on wind factor, glass type and glass thickness without security pin, with security plate. MOD 26 (38.1 mm) (50.8 mm) Height (ft) Situation F (psf) 5/16" (8.76 mm) 3/8" (10.76 mm) 1/2" (12.76 mm) 5/16" (8 mm) empered glass 3/8" (10 mm) 1/2" (12 mm) 328 Corner " (500 mm) 31.5" (800 mm) 31.5" (800 mm) 31.5" (800 mm) 39.4" (1000 mm) 55.1" (1400 mm) 65 Corner " (800 mm) 31.5" (800 mm) 39.4" (1000 mm) 39.4" (1000 mm) 55.1" (1400 mm) 55.1" (1400 mm) 328 Normal " (800 mm) 39.4" (1000 mm) 47.2" (1200 mm) 47.2" (1200 mm) 55.1" (1400 mm) 55.1" (1400 mm) 65 Normal max 31.5" (800 mm) 39.4" (1000 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 26 Corner " (800 mm) 47.2" (1200 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 26 Normal " (1200 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) 55.1" (1400 mm) (glass thickness) Fascia mount? Safety first! Use: or ( 169) (MOD 26) 151
8 D Infills SAIN Glass clamps - MOD 20 All dimension drawings are in inches Flat ube MOD 20 INDOOR (glass thickness) /64" (6 mm) QS /16" (8 mm) QS MOD 20 - D = (38.1 mm) INDOOR D (glass thickness) /64" (6 mm) QS /16" (8 mm) QS INDOOR (glass thickness) /4" lam. (6.76 mm) QS INDOOR D (glass thickness) /4" lam. (6.76 mm) QS OUDOOR (glass thickness) /64" (6 mm) QS /16" (8 mm) QS OUDOOR D (glass thickness) /64" (6 mm) QS /16" (8 mm) QS OUDOOR (glass thickness) /4" lam. (6.76 mm) QS MOD 20 tested for INDOOR OUDOOR D (glass thickness) /4" lam. (6.76 mm) QS MOD 20 tested for INDOOR Use our Q-screws QS- and Q-tools Q- - See pages Screw no. QS-127 Article no Description 5/16-18 x 3/4" Socket head cap screw, ype stainless steel Drill size J ap size 5/ A Q-23 Q-cleaner 10.1 fl.oz Q
9 D Infills SAIN Glass clamps - MOD 21 All dimension drawings are in inches Flat ube MOD 21 INDOOR (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS MOD 21 - D = (38.1 mm) INDOOR D (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS INDOOR (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS INDOOR D (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS OUDOOR (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS OUDOOR (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS OUDOOR D (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS OUDOOR D (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS MOD 21 tested for INDOOR MOD 21 tested for INDOOR Use our Q-screws QS- and Q-tools Q- - See pages We have designed different glass clamps for tempered and for laminated glass. his guarantees the best clamping results on glass panels. Q-railing, we make the difference! Screw no. QS-127 Article no Description 5/16-18 x 3/4" Socket head cap screw, ype stainless steel Drill size J ap size 5/ A Q-22 Q-ultra-clean 16.9 fl.oz
10 SAIN Glass clamps - MOD 22 All dimension drawings are in inches Flat ube 2.48 Ø Ø MOD 22 INDOOR (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS INDOOR (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS OUDOOR (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS OUDOOR (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS MOD 22 - D = (38.1 mm) / (50.8 mm) D 1.89 INDOOR D (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS INDOOR D (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS OUDOOR D (glass thickness) /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS /64" (6 mm) QS /16" (8 mm) QS /8" (10 mm) QS OUDOOR D (glass thickness) /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS /4" lam. (6.76 mm) QS /16" lam. (8.76 mm) QS We have designed different glass clamps for tempered and for laminated glass. his guarantees the best clamping results on glass panels. Q-railing, we make the difference! Screw no. QS-127 Article no Description 5/16-18 x 3/4" Socket head cap screw, ype stainless steel Drill size J ap size 5/ A 25/64" Use our Q-screws QS- and Q-tools Q- - See pages
11 SAIN Glass clamps - MOD 24 All dimension drawings are in inches Flat ube 2.17 Ø Ø MOD 24 INDOOR (glass thickness) /2" lam.(12.76 mm) QS /16" lam.(13.52 mm) QS /8" lam.(16.76 mm) QS /16" lam.(17.52 mm) QS Ø 1.9" MOD 24 - D = Ø 1.9" (48.3 mm) 1.73 INDOOR D (glass thickness) Ø 1.9" 1/2" lam.(12.76 mm) QS Ø 1.9" 9/16" lam.(13.52 mm) QS Ø 1.9" 5/8" lam.(16.76 mm) QS Ø 1.9" 11/16" lam.(17.52 mm) QS OUDOOR (glass thickness) /2" lam.(12.76 mm) QS /16" lam.(13.52 mm) QS /8" lam.(16.76 mm) QS /16" lam.(17.52 mm) QS OUDOOR D (glass thickness) Ø 1.9" 1/2" lam.(12.76 mm) QS Ø 1.9" 9/16" lam.(13.52 mm) QS Ø 1.9" 5/8" lam.(16,76 mm) QS Ø 1.9" 11/16" lam.(17,52 mm) QS Insert the security plate into the glass clamp instead of using a security pin. Your costs are reduced because drilling the glass is not required. Please order security pins and fixing bolts separately. 155
12 SAIN Glass clamps - MOD 25 All dimension drawings are in inches Flat ube Ø 0.31 Ø MOD 25 INDOOR (glass thickness) /2" (12 mm) QS INDOOR (glass thickness) /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS OUDOOR (glass thickness) /2" (12 mm) QS OUDOOR (glass thickness) /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS MOD 25 - D = (38.1 mm) / (50.8 mm) D INDOOR D (glass thickness) /2" (12 mm) QS /2" (12 mm) QS INDOOR D (glass thickness) /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS OUDOOR D (glass thickness) /2" (12 mm) QS /2" (12 mm) QS OUDOOR D (glass thickness) /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS Q-23 Q-cleaner 10.1 fl.oz Q-22 Q-ultra-clean 16.9 fl.oz Screw no. QS-127 Article no Description 5/16-18 x 3/4" Socket head cap screw, ype stainless steel Drill size J ap size 5/ A 25/64"
13 SAIN Glass clamps - MOD 26 All dimension drawings are in inches Flat ube Ø 0.31 Ø 0.31 MOD 26 Ø INDOOR (glass thickness) /16" (8 mm) QS /8" (10 mm) QS /2" (12 mm) QS INDOOR (glass thickness) /16" lam. (8.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS OUDOOR (glass thickness) /16" (8 mm) QS /8" (10 mm) QS /2" (12 mm) QS OUDOOR (glass thickness) /16" lam. (8.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS Ø 2.17 D MOD 26 - D = (38.1 mm) / (50.8 mm) INDOOR D (glass thickness) * 5/16" (8 mm) QS * 3/8" (10 mm) QS * 1/2" (12 mm) QS /16" (8 mm) QS /8" (10 mm) QS /2" (12 mm) QS INDOOR D (glass thickness) * 5/16" lam. (8.76 mm) QS * 3/8" lam. (10.76 mm) QS * 1/2" lam. (12.76 mm) QS /16" lam. (8.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS OUDOOR D (glass thickness) * 5/16" (8 mm) QS * 3/8" (10 mm) QS * 1/2" (12 mm) QS /16" (8 mm) QS /8" (10 mm) QS /2" (12 mm) QS Insert the security plate into the glass clamp instead of using a security pin. Your costs are reduced because drilling the glass is not required. Q-23 Q-cleaner 10.1 fl.oz OUDOOR D (glass thickness) * 5/16" lam. (8.76 mm) QS * 3/8" lam. (10.76 mm) QS * 1/2" lam. (12.76 mm) QS /16" lam. (8.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS For more information or project photos, please visit our website: 157
14
15 SAIN / POLISHED Glass clamps - MOD 28 All dimension drawings are in inches Flat ube 2.48 Ø Ø DØ 1.9" 1.89 MOD 28 INDOOR (glass thickness) /16" (8 mm) QS /8" (10 mm) QS /2" (12 mm) QS MOD 28 - D = Ø 1.9" (48.3 mm) INDOOR D (glass thickness) Ø 1.9" 5/16" (8 mm) QS Ø 1.9" 3/8" (10 mm) QS Ø 1.9" 1/2" (12 mm) QS INDOOR (glass thickness) /16" lam. (8.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS INDOOR D (glass thickness) Ø 1.9" 5/16" lam. (8.76 mm) QS Ø 1.9" 3/8" lam. (10.76 mm) QS Ø 1.9" 1/2" lam. (12.76 mm) QS OUDOOR (glass thickness) /16" (8 mm) QS /8" (10 mm) QS /2" (12 mm) QS OUDOOR D (glass thickness) Ø 1.9" 5/16" (8 mm) QS Ø 1.9" 3/8" (10 mm) QS Ø 1.9" 1/2" (12 mm) QS OUDOOR (glass thickness) /16" lam. (8.76 mm) QS /8" lam. (10.76 mm) QS /2" lam. (12.76 mm) QS OUDOOR D (glass thickness) Ø 1.9" 5/16" lam. (8.76 mm) QS Ø 1.9" 3/8" lam. (10.76 mm) QS Ø 1.9" 1/2" lam. (12.76 mm) QS International Design Model Protection International Design Model Protection Please order security pins and fixing bolts separately. 25/64" 159
16 SAIN Glass clamps - MOD 51/52 All dimension drawings are in inches ube + flat ube + flat Ø MOD 51 Ø MOD 52 INDOOR (glass thickness) INDOOR (glass thickness) /2" (12 mm) QS /2" (12 mm) QS OUDOOR (glass thickness) OUDOOR (glass thickness) /2" (12 mm) QS /2" (12 mm) QS SAIN Infills Adapters for glass clamps Flat MOD 0723 INDOOR OUDOOR Ø 1.38 Ø 1.18 Ø Screw no. QS-127 Article no Description 5/16-18 x 3/4" Socket head cap screw, ype stainless steel Drill size J ap size 5/ A Use our Q-screws QS- and Q-tools Q- - See pages MOD 0723 MOD 51/52 Mounting A QS
TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
More informationQ-DESIGNS BY Q-RAILING. Q-designs by Q-railing
Q-DESIGNS BY Q-RAILING CONTENT 2 Q-DESIGNS BY Q-RAILING WE DESIGN RAILING SYSTEMS Q-HANDRAIL Q-LINE SQUARE LINE QUICKRAIL EASY GLASS TOP EASY GLASS EVOLUTION PROJECTS What can you expect from Q-railing?
More informationDoor Hinges Drill-in Hinges
Drill-in hinge StarTec Frame part For timber lining frames For rebated doors Maintenance-free friction bearing To use in combination with receiver Max. door weight: 40 kg Knuckle: Ø15 mm Drilling bit Ø7.2
More informationM ODE RN. Edition 1.5
M ODE RN M E TA L CO L L E C TIO N INTERIOR EXTERIOR Edition 1.5 S TA I N L E S S S T E E L CABLE INFILLS Modern Metal Made Easy... This Modern Metal Collection from Oak Pointe, LLC which includes stainless
More informationOpen Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
More informationThe Safe Solution for Stainless Steel Balustrade Systems
M E R G I N G S A F E T Y W I T H S T Y L E The Safe Solution for Stainless Steel Balustrade Systems KEE STAINLESS is the most exclusive product in the Kee Safety handrail and balustrade product range.
More informationRAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES
RAILINGSYSTEMS PLANNING MANUAL EFFICIENCY DECIDES THE SYSTEM The system that can even be without any load-bearing handrail... * With general technical approval (AbP) and certified type structural properties!
More informationAluminum Railing Installation. Glass Railing Spindle Railings Intimacy Railings and Panels
Aluminum Railing Installation Glass Railing Spindle Railings Intimacy Railings and Panels This information in this manual will help you to Better understand our product line. Give you guidelines for an
More informationATLANTIS RAIL Contact Information
ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing
More informationQ-RAILING DESIGNER SYSTEMS
Q-RAILING DESIGNER SYSTEMS THE IDEAL SOLUTION FOR EVERY RAILING PROJECT BRING YOUR VISION TO LIFE CONTENT WELCOME TO Q-RAILING, YOUR SOURCE FOR INNOVATIVE, HIGH GRADE, DESIGNER RAILING SYSTEMS. OUR SYSTEMS
More informationBezdan Stainless. Frameless Glass Railing. Baluster Railing EXCEPTIONAL DESIGN AND FUNCTION
Bezdan Stainless EXCEPTIONAL DESIGN AND FUNCTION Bezdan offers frameless and baluster glass railing systems that deliver a high end result with exceptional design and function for everyday applications.
More informationDIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE SAFE STYLISH AND AFFORDABLE FOR DIY GLASS FENCE SOLUTIONS THE CHOICE IS SIMPLE Bring your outdoor areas to life with clear views and clean lines.
More informationOptiLine 45 Floor boxes
OptiLine 45 Floor outlet boxes P89490 Type Colour Dimensions A/B/C (mm) Qty per pack Ref. No. Floor outlet box including mounting frames for Altira, trim frame with four quick-fix devices and lid with
More informationQ-RAILING SYSTEMS THE IDEAL SOLUTION FOR EVERY PROJECT THE PREMIUM BRAND IN RAILING SYSTEMS
Q-RAILING SYSTEMS THE IDEAL SOLUTION FOR EVERY PROJECT THE PREMIUM BRAND IN RAILING SYSTEMS BRING YOUR VISION TO LIFE WELCOME TO Q-RAILING, YOUR SOURCE FOR INNOVATIVE, HIGH GRADE, DESIGNER RAILING SYSTEMS.
More informationMulti-Stage ASSEMBLY INSTRUCTIONS ST-8100 SERIES. 125 TAYLOR PARKWAY ARCHBOLD, OH PHONE: (419) FAX: (419)
125 TAYLOR PARKWAY ARCHBOLD, OH 43502 PHONE: (419) 445-8915 FAX: (419) 445-0367 www.biljax.com Multi-Stage ST-8100 SERIES ASSEMBLY INSTRUCTIONS ALL DRAWINGS ARE FOR ILLUSTRATION ONLY. PRINTED IN U.S.A.
More informationATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA North Las Vegas, NV 89030
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com
More informationCOMPOSITE RAILING INSTALLATION
COMPOSITE RAILING INSTALLATION Tools All you ll need is a hammer and screw gun, circular saw (carbidetipped blade with fewer than 20 teeth is recommended), level, tape measure, rasp and blue chalk line.
More informationAssembly Instructions
Section A Interna-Rail Components Handrail systems utilizing Interna-Rail in-line fittings provide a sleek architectural finish with anodized fittings and aluminum pipe. Interna- Rail has the clean look
More informationPole Mount Installation Manual
Pole Mount Installation Manual Thank You for Choosing AIMS Power! 1. AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We ensure our products are manufactured to
More informationQ-RAILING DESIGNER SYSTEMS
Q-RAILING DESIGNER SYSTEMS THE IDEAL SOLUTION FOR EVERY RAILING PROJECT BRING YOUR VISION TO LIFE CONTENT WELCOME TO Q-RAILING, YOUR SOURCE FOR INNOVATIVE, HIGH GRADE, DESIGNER RAILING SYSTEMS. OUR SYSTEMS
More informationWaist-high Railing System from Tempered Glass BH-06 ASSEMBLY AND OPERATION MANUAL
Waist-high Railing System from Tempered Glass BH-06 ASSEMBLY AND OPERATION MANUAL Waist-high Railing System from Tempered Glass BH-06 Assembly & Operation Manual Assembly & Operation Manual Dear Customers!
More informationATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 10/13/2016 Issued: 12/17/2014 Visit www.ati-es.com for current status Revised: 06/05/2015 Page 1 of
More informationPORTABLE UNITS BASKETBALL SCHELDE SUPER SAM MULTI-ADJUST
PORTABLE UNITS SCHELDE SUPER SAM MULTI-ADJUST Highest class unit with regulated projection (within range of 245-325 cm) equipped with SAM (Spring Assisted Mechanism) - unique solution which avails to set
More informationQ-RAILING SYSTEMS THE IDEAL SOLUTION FOR EVERY RAILING PROJECT
Q-RAILING SYSTEMS THE IDEAL SOLUTION FOR EVERY RAILING PROJECT THE PREMIUM BRAND IN RAILING SYSTEMS BRING YOUR VISION TO LIFE WELCOME TO Q-RAILING, YOUR SOURCE OF INNOVATIVE, HIGH GRADE, DESIGNER RAILING
More informationGEZE SLIDING DOOR SYSTEMS
GEZE Perlan 140 Multi-faceted uses with individual accessories The discrete design supports every required room effect and makes the sliding door system with its accessories a guarantee for elegant and
More informationThis is trial version
Guiding components, Locating units, Dowel pins, Screws, Springs, Dateand recycling inserts, Retaining rings, Lifting devices, Clamping-systems, Thermal insulating sheets, Locating rings 1.01 1.02 Ordering
More informationINSTALLING INVISIRAIL GLASS PANELS POST INFORMATION... 2 PRE-INSTALLATION... 2
Contents POST INFORMATION... 2 PRE-INSTALLATION... 2 STEP A1: MEASURING FOR INVISIRAIL CUSTOM GLASS PANELS (skip if using Standard Sized Panels)... 2 STEP A2: GATHER ADDITIONAL TOOLS/SUPPLIES... 2 STEP
More informationMODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More informationMake your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing.
Make your railing view friendly with the original stainless steel cable infill for wood, metal, and composite-sleeved wood railing. 1 Feeney makes it easy The CableRail cable infill system is slender,
More informationACE ARCHI is concerntrate on customize service, we combine the design and manufactural to provide our customers as building projects solution.
ACE ARCHI is concerntrate on customize service, we combine the design and manufactural to provide our customers as building projects solution. ACE Architectural Products Co.,Ltd A:Rm1209,No.241 building,chuangye
More informationSTAINLESS STEEL SYSTEMS
SQUARE SERIES ZC CABLE SERIES ZR ROUND SERIES ZX Photos and drawings are indicative. The installer is responsible for checking the current regulations, in their area, with their local building inspector.
More informationINSTALLATION INSTRUCTIONS
Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.
More informationM2 Assembly. M2 Sub-Assemblies mm Belt Sub-Assembly mm Belt Sub-Assembly Spider Sub-Assembly... 4
M2 Assembly Table of Contents M2 Sub-Assemblies... 3 630mm Belt Sub-Assembly... 3 702mm Belt Sub-Assembly... 3 Spider Sub-Assembly... 4 Idler Bolt Sub-Assembly... 8 Y Motor Sub-Assembly... 9 X Motor Sub-Assembly...
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationSTRATUS SHELTER. Take bike parking to new heights
Take bike parking to new heights The Stratus Shelter is a striking bike shelter option for any transit station, university campus, or multi-family residential building project. It is constructed of American
More informationA-SL-1 A-SL-1 HAND RAIL STAIRS STRUCTURE/ ARCH SLIDE FOUNDATION 12" ROUND PIER 20" SQUARE PIER CAP DRILL AND EPOXY BOLTS *SEE FOUNDATION DETAILS
2X2 SQUARE TUBING /" WALL ON STRUCTURAL FRAME /8" WALL RAFTERS & INFILL NO. ISSUE HOUSE # GALVANIZED STEEL STAIRS SLIDE 2 GA SS POLISHED FINSHED LASER CUT FOUNDATION 2" ROUND PIER 20" SQUARE PIER CAP DRILL
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationINSTALLATION INSTRUCTIONS
Tools required for the installation. A. Core Drill 87mm Drill bit B. Tape measure C. Spirit Level D. Marking pen E. Caulking gun F. Cutting Pliers G. Cordless Drill and Philips head bit, 5mm Drill bit.
More informationAssembly & Installation Instructions FOR VEHICLE MOUNT KIT USING VEHICLE CENTER MEMBER
Assembly & Installation Instructions FOR VEHICLE MOUNT KIT 991002 USING VEHICLE CENTER MEMBER 9910092 TO FIT 99 - LATER Chevrolet 2500 Silverado 4x4 and 3500 Pickup 4x4 99 - LATER GM 2500 Sierra 4x4 and
More information#4 Phillips Driver Bit 1/8, 4mm, 5.5mm & 8mm (5/16 ) Allen Wrench. Safety Glasses
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com
More informationMerlin / Prima. Patch Fittings. Patch Fittings. Merlin & Prima Series
/ Prima Patch Fittings & Prima Series / Prima In the field of architectural fittings for glass doors, provides high quality and total design flexibility for ease of installation, safety, security and functionality.
More informationThe standards stay the same, but the innovation never ends...
The standards stay the same, but the innovation never ends... BTS Elegant on-floor glass supporting systems distinguish your high-end projects with their quality, beauty and durability. Floor fixings
More informationINSTALLATION INSTRUCTIONS Aluminum Railing System
INSTALLATION INSTRUCTIONS FASCIA MOUNT SURFACE MOUNT OFFSET BASE SURFACE MOUNT STANDARD BASE CORE MOUNT Ø3" [Ø76 mm] 3 2 1 " [89 mm] 1 4 1 " [32 mm] 2 8 7 " [73 mm] 200 SERIES 300 SERIES 3 3 4 " [95 mm]
More informationinstallation care & maintenance instructions lifecycledecking.com 25-year limited residential warranty 20-year limited commercial warranty
installation care & maintenance instructions lifecycledecking.com 25-year limited residential warranty 20-year limited commercial warranty Installation Instructions As with any building project, use proper
More informationSPECIAL HINGES. From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall.
SPECIAL HINGES From flap hinges and mini-hinges to glass door hinges for direct mounting on the cabinet side wall. 0 GRASS THE CATALOGUE 0-0 SPECIAL HINGES Hinges for special applications. Where individual
More informationBERMANGLASS 3D KILN CAST GLASS
PRODUCT TECH BRIEF DATA BermanGlass is the newest addition to Forms+Surfaces innovative architectural glass program. Created when Joel Berman Glass Studios joined the F+S family, BermanGlass unites artistic
More informationSolarMount (E)volution
SolarMount (E)volution SOLARMOUNT (E)VOLUTION: THE BEST JUST GOT BETTER. Engineering, Excellence, and Ease. Performance Engineered for versatility and reduced installation time, SolarMount (E)volution
More information21 C SHELVING SYSTEMS 21 C Shelving Systems consist of innovative products that provide visually appealing shelving and storage to any area. This syst
21 C SHELVING SYSTEMS 21 C SHELVING SYSTEMS 21 C Shelving Systems consist of innovative products that provide visually appealing shelving and storage to any area. This system is available in two unique
More informationUniversal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
More informationInstallation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1
More informationInstallation of Balustrade Systems
Installation of Balustrade Systems IMPORTANT: Be sure to mark the center point of each newel post's location prior to installation to insure proper spacing. All product interfaces must use PL Premium Adhesive
More informationARCHITECTURAL RAILING COMPONENTS CATALOG
www.stairservice.com -800-90-057 sales@stairservice.com 07 ARCHIECURAL RAILING COMPONENS CAALOG 07 ARCHIECURAL RAILING COMPONENS CAALOG SAINLESS SEEL CHEMICAL COMPOSIION here are many grades of stainless
More informationTREX POST MOUNT DECKING AND CONCRETE
TREX POST MOUNT DECKING AND CONCRETE for Pressure-treated Wood Framing LOCATION AND INSTALLATION OF POST MOUNTS IMPORTANT NOTES:» EACH POST MUST BE ATTACHED AS SHOWN TO ENSURE A CODE COMPLIANT AND SAFE
More information2015 Feeney (8/15) # D. Aluminum Railing Systems
2015 Feeney (8/15) #2012-425D Aluminum Railing Systems Aluminum Railing Systems Searching For a Complete Railing System? Look No Further. DesignRail by feeney aluminum railing frame systems combine the
More informationInstallation Manual Using Existing Handrail Version 4.0 Oct 2017
Installation Manual Using Existing Handrail Version 4.0 Oct 2017 ORDER OF ASSEMBLY TOOLS YOU WILL NEED - Fine Saw - Sander - Wood Filler - Allen keys - Screw Driver - Drill - Suitable Screws PROTECTING
More informationThe following instructions will guide you through the installation of your new vinyl railing.
Installation Guide St. James Vinyl T-Rail Tools Required Protective eye glasses 3/8 x 3 Concrete Anchors/Fasteners (for Tape measure concrete installations) Variable speed drill/screwdriver Philips Driver
More informationClearview Railing System Installation Instructions
Clearview Railing System Installation Instructions Disclaimer: AGS Stainless, Inc. has its Clearview Railing Systems designed by a professional engineer to meet the requirements of the latest national
More informationParts & Tools. O'Cello printing and assembly instructions. o-cello.com
The O'Cello is a 3D-printable cello developed by Conor O'Kane, which is free to download and print for personal use. This document will show you how to print and assemble your own O'Cello. For the latest
More information7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
More informationC4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS
C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS Thank you for your purchase of the C4 Fabrication s 5th Gen 4Runner Rock Sliders! This product was carefully crafted to ensure a perfect
More informationTi-Color STAINLESS STEEL HANDRAIL
Ti-Color STINLESS STEEL HNDRIL Handrail Custom-made Rail HNDRIL STNDRD Handrail Custom-made rail Vertical Type Horizontal Type Elegance Type HNDRIL TYPE Vertical Type 5001 / 6001 6002 / 7002 5004 / 6004
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationOval Vinyl Gazebo. Assembly Manual
Oval Vinyl Gazebo Assembly Manual Gazebo Assembly Thank you for your purchase of this Gazebo. This manual is designed to simplify the assembly process, however we strongly recommend having an experienced
More informationinstallation care & maintenance instructions moistureshield.com limited lifetime warranty
installation care & maintenance instructions 866.729.2378 moistureshield.com limited lifetime warranty It s comforting to know that you re about to build a deck that gives you every possible advantage.
More informationAB INDUSTRIES FENCING PRODUCTS
AB INDUSTRIES FENCING PRODUCTS WWW.ABINDUSTRIES.COM.AU Did you know that A&B Industries is the manufacturer? We manufacturer and distribute the products directly to you the Wholesaler. There is no middle
More informationPRODUCT: LOKI INSTALLATION INSTRUCTIONS. Product is covered by U.S. patents. For more information visit
R INSTALLATION INSTRUCTIONS PRODUCT: LOKI CONFIGURATION: SINGLE DOOR MOUNT: GLASS MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com . TOOLS + MATERIALS REQUIRED TOOLS
More informationCXT PRO RAILING INSTALLATION INSTRUCTIONS For Installations Using Aluminum and Glass Balusters Sold Separately
CXT PRO RAILING INSTALLATION INSTRUCTIONS For Installations Using Aluminum and Glass Balusters Sold Separately CCRR-0171 PFS AA-652 Drill/power screwdriver Assorted drill bits Hammer Miter or circular
More informationMarketed and Distributed by: Absolute Distribution, Inc. Ph: Fax
Marketed and Distributed by: Absolute Distribution, Inc. TM Integra Rail Kits 84Composite Rail Kit IntegraTM Connector Options Use the steps below for the following pages to complete your Integra Rail
More informationCODE TUBE SIZE WALL THICKNESS DEGREE FINISH STAINLESS STEEL RADIUS CENTER
TUBING BALUSTRADE FITTINGS TUBING DIAMETER WALL FINISH TUBE SIZE WALL THICKNESS DEGREE FINISH * Stainless Steel 316 - Mirror Polish 90 DEGREE SS-TUBE-316-25 25.4mm 1.5mm 6000mm MIRROR SS-TUBE-316-38 38.1mm
More information3.0mm Rod Fixings Components
800-753-9688 sales@novadisplay.com www.novadisplay.com 3.0mm Rod Fixings Components 3mm Basic Rod Fixings RB1 RB2 RBT1 1.0M (3' 3-3/8") LONG ROD WITH ADJUSTABLE ANGLE FIXING - Screw Fixing Type for Ceiling
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More informationClamping devices - mechanical
Zero point reference also on down draw clamps A fixed zero point reference on down draw clamps is self-evident in the STARK zero point mounting system. This zero point reference on down draw clamps is
More informationInstallation Manual Using StairFurb Handraail Version 5.1 OCT 2017
Installation Manual Using StairFurb Handraail Version 5.1 OCT 2017 ORDER OF ASSEMBLY TOOLS YOU WILL NEED - Fine Saw - Sander - Wood Filler - Allen keys - Screw Driver - Drill - Suitable Screws PROTECTING
More informationATI Evaluation Service A Division of Architectural Testing Certification Services Code Compliance Research Report
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 04/15/2016 Issued: 06/24/2014 Visit www.ati-es.com for current Revised: 09/24/2014 Page 1 of 21 Maine
More informationATI Evaluation Service A Division of Architectural Testing Certification Services
ATI Evaluation Service A Division of Architectural Testing Certification Services Subject to Renewal: 11/15/2011 Issued: 11/15/2010 Visit for current status Page 1 of 16 Maine Ornamental LLC 933 U.S. Route
More informationMounting Instructions Item No.: xxx
Mounting Instructions Item No.: 271.92.xxx Wall-Beds 1 General Notes For vertical folding beds Successful and safe installation of Bed-Lift and construction of casework requires a professional skill level
More information800-753-9688 sales@novadisplay.com www.novadisplay.com 6.0mm Rod Fixings Components 6mm Basic Rod Fixings RAS TOP/BOTTOM FIXINGS FOR ROD - Includes Spring Tensioner, top/ceiling and bottom/floor fixings
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationKO4070 Series. MOUNTING The KO4070 series have integral mounting feet that snap onto standard 35mm DIN rail. They cannot be panel mounted.
KO070 Series TERMINALS Box clamp design terminal blocks are used with the KO070 series enclosures. Wire(s) to be terminated are squeezed between the bottom of the clamp and the busbar for reliable, gastight
More informationContinuous Handrail Kit Installation Instructions
Continuous Handrail Kit Installation Instructions ALUMINUM RAILING SYSTEM Canadian Version Wall Application (see page 2) Railing Application (see page 7) Wall anchors not provided Hardware included: 1x
More information1. TOOLS + MATERIALS REQUIRED
R INSTALLATION INSTRUCTIONS PRODUCT: BALDUR + ODEN CONFIGURATION: BI-PARTING DOOR MOUNT: TOP MOUNT Product is covered by U.S. patents. For more information visit www.krownlab.com. TOOLS + MATERIALS REQUIRED
More information8x8 Spa Breeze Pergola Assembly Manual Outdoor Living Today
8x8 Spa Breeze Pergola Assembly Manual Outdoor Living Today Revision 3. Feb 18th/2015 Note: Post Mounting Hardware is NOT included in this kit. Please confirm with your local building permit office to
More informationVertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
More informationStainless SHS stanchions with glass infill and offset handrail
Stainless SHS stanchions with glass infill and offset handrail design elements C4 Min 180 100 40 Min 1000mm 100 100 Stainless SHS stanchions with glass infill and offset handrail C4 design Stainless steel
More informationFUSION JULIETTE BALCONIES FITTING INSTRUCTIONS
FUSION JULIETTE BALCONIES FITTING INSTRUCTIONS The Richard Burbidge FUSION Juliette Balcony System comprises a combination of timber and aluminium rails, glass infill panels and brackets designed for use
More informationInstallation Manual Flat Track Series
Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................
More informationSteel Solutions USA 602 E. Walnut Street Watseka, IL p: (888) f: (815)
Steel Solutions USA 602 E. Walnut Street Watseka, IL 60970 p: (888) 875-5004 f: (815) 432-3364 sales@steelsolutionsusa.com Published February 2011 2011 Steel Solutions USA. All rights reserved. version
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationI n v i s i R a i l. c o m
InvisiRail.com Get the look you ve always wanted You ve worked hard to create that view. Choose InvisiRail for the best sight lines while providing safety and security for your family. Our 10mm thick safety
More informationRUMFORD 1000 / 1000CD / 1000H
RUMFORD 1000 / 1000CD / 1000H TABLE OF CONTENTS Dear Customer, The Renaissance Rumford 1000, 1000CD, 1000H are all members of the Renaissance Fireplaces TM family of ultra high end, low emission fireplaces.
More informationSupplement. Assembly and Maintenance Guide Titan Series Commercial Step System. Manufactured in the USA
Supplement Assembly and Maintenance Guide Titan Series Commercial Step System Manufactured in the USA IMPORTANT! Read and follow all labels and assembly instructions including warnings and cautions prior
More informationMultipoint Gear Locks for Aluminium Doors CERTIFIED
AL0 0/06 Multipoint Gear Locks for Aluminium Doors CERIFIED HIGH SECURIY Lateral horizontal sliding deadbolts. Independent locking points: if one of the deadbolts is forced open, the others will stay locked.
More informationSLOANE ACCESSORIES PTY LTD
SLOANE ACCESSORIES PTY LTD FRAMELESS GLASS FENCING & BALUSTRADE STAINLESS STEEL FITTINGS 88 STONEY CREEK ROAD, BEXLEY NSW 2207 TEL: 1300 138 344 EMAIL: SALES@SLOANEACCESSORIES.COM.AU WWW.SLOANEACCESSORIES.COM.AU
More informationPrivacy Wall Glass Selections - Polished Edge Slider Door
Privacy Wall Glass Selections - Polished Edge Slider Door 3/6" HEX BIT PUTTY KNIFE #2 ACR BIT SUCTION CUP HOLDERS DOOR LEAF: Satin Tempered Clear Tempered LOCTITE 425 SIDE LIGHT ETCHED GLASS STYLES: Satin
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: D1090.02-301-44 Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California PRODUCT TYPE: Bi-Fold Door SERIES/MODEL:
More informationMay 14, Installation Manual
May 14, 2012 Installation Manual Contents MAG TRACKER Components...1 Mount Installation...7 Module Installation & Grounding...11 Maintenance...14 Warranty......14 Contact Information......14 May 14, 2012
More informationBLACK WIDOW COMPOSITE
PAGE-1 UPDATED 3-6-2015 REV.1 BLACK WIDOW COMPOSITE Detailed installation manual PAGE-2 UPDATED 3-6-2015 SpiderRax, Inc. REVISION PAGE Installation Manual For BWC-S, BWC-B,BWC-F DATE PAGES REASON OLD LEVEL
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationBarn Door & Hardware Installation Guide
Barn Door & Hardware Guide INTRODUCTION Thank you for purchasing our hardware. Our barn door and hardware will add a stunning accent to your living environment and maximize its space. This manual covers
More information10ft X 16ft Breeze Pergola Assembly Manual. Outdoor Living Today. Revision 6 March 20th,2012
10ft X 16ft Breeze Pergola Assembly Manual Outdoor Living Today Revision 6 March 20th,2012 Note: Post Mounting Hardware is NOT included in this kit. Please confirm with your local building permit office
More information