A-SL-1 A-SL-1 HAND RAIL STAIRS STRUCTURE/ ARCH SLIDE FOUNDATION 12" ROUND PIER 20" SQUARE PIER CAP DRILL AND EPOXY BOLTS *SEE FOUNDATION DETAILS
|
|
|
- Loreen Elliott
- 6 years ago
- Views:
Transcription
1 2X2 SQUARE TUBING /" WALL ON STRUCTURAL FRAME /8" WALL RAFTERS & INFILL NO. ISSUE HOUSE # GALVANIZED STEEL STAIRS SLIDE 2 GA SS POLISHED FINSHED LASER CUT FOUNDATION 2" ROUND PIER 20" SQUARE PIER CAP DRILL AND EPOXY BOLTS *SEE FOUNDATION DETAILS A-SL- /2" STEEL PIPE GALVANIZED QTY: 2 SLIDE PERSPECTIVE NOT TO SCALE STRUCTURE/ ARCH /4" X " IPE " STEEL PIPE GALVANIZED QTY: 2 TUMBLING HOUSE - SUB ASSEMBLY -HOUSE #5 AND SLIDE HAND RAIL A-SL-
2 SCALE: /8"=' HANDRAIL A-SL-0 TUMBLING HOUSE - HOUSE #5, SLIDE- HANDRAIL NO. ISSUE +4 X SL-H-F HANDRAIL PLAN SL-H-F HANDRAIL ROTATION PERSPECTIVE 2 HANDRAIL BENDS SL-H-F SL-H-F HANDRAIL BACK ELEVATION 4 Z Ø " PIPE LEVEL 5'-8 7/8" + Y - Y -4 X Y X A-SL-0 2'-0 5/8" '-0 /8" '- /8" 2'-0 /4" 2'- /8" 2'- /8" 4'-" 4 HARDWARE '-4 /" SL-H-P0 SL-H-P R0 /4" 5'- /4" SL-H-P SL-H-P0 5 /" SL-H-P2 '-9 5/8" SL-H-P2 R2'- 5/8" 8 7/8" SL-H-P2 SL-H-P2 ITEM DESCRIPTION QTY /2" #0 24 FLAT HEAD BOLT FLAT WASHER #0 24 ACORN NUT
3 TREAD NO. ISSUE /2" = '-0" A-SL- TUMBLING HOUSE - SUB ASSEMBLY - SWING SL-H-F TREAD SCALE:"=' SLT- SLT-2 SLT- SLT-4 '-0 7/8" 5 MITER BOTH SIDES SLT-5 '-0" /8" COUNTERSUNK HOLE 2'-0 /8" 2'-0 /8" SLT- 2'- /2" 2'- /8" SLT-7 2'-2 /4" 2'-2 /2" SLT-8 2'- 7/8" 2'- /4" 2'-5 /8" 2'-4 7/8" 2'- /8" 2'- /8" 2'-7 /2" 2'-7 /8" 2'-8 /4" A-SL- /4"
4 SL-H-L SL-A-L SL-A-R SLIDE SL-H-R HOUSE#5 IPE TREADS RISERS FINAL ASSEMBLY ISSUE NOT TO SCALE A-SL-2 TUMBLING HOUSE - HOUSE #5, SLIDE- HANDRAIL NO. SEQUENCE HARDWARE SL-F FINAL ASSEMBLY PERSPECTIVE -ATTACH HANDRAILS TO HOUSE #5 2-ARCHES TO FOUNDATION -HOUSE TO ARCHES 4-SLIDE TO RIBS ITEM DESCRIPTION /2" #0 24 FLAT HEAD BOLT FLAT WASHER #0 24 ACORN NUT /2" #0 FLAT HEAD DRILL POINT " #0 WOOD SCREW QTY 2 2 A-SL-2
5 S- SL-S- TUMBLING HOUSE - SUB ASSEMBLY - SWING SL-D-5 A-SL-2 A-SL-4 SL-E- 4'-7 /4" '-9 /4" 2'-0 /4" 4'-" 8'- /4" REVIEW SITE PLAN /8" = '-0" 0'-5 /8" A-SL-4 SL-E-2 SL-P '-0" '-0" REVIEW 8/24/202 REVIEW NO. ISSUE S-2 A-SL '-8" LOCATION SL-E- A-SL- SLIDE SITE PLAN A-SL-2
6 A-SL- SIDE ELEVATION /2" = '-0" TUMBLING HOUSE - SUB ASSEMBLY - SWING SL-D- SL-E SLIDE LEFT ELEVATION SCALE:/2"=' REVIEW 5'-" NO. ISSUE 22'-7" A-SL- '-2" 5'- /8" '-7 7/8" 0'-0 /2" 2'- /2" 45 8'- /4" '-0 5/8"
7 ELEVATIONS /8" = '-0" REVIEW A-SL-4 8'- /8" NO. ISSUE TUMBLING HOUSE - SUB ASSEMBLY - SWING SL-E 2 8'-9 /8" SL-D-2 SLIDE FRONT ELEVATION SL-E SLIDE BACK ELEVATION A-SL-4 7 /8" 2'-4 /4" 5'-7 5/8" 5'- /4" 8'-8 /8" '-7 7/8" 5'-7 /4"
8 SIDE SECTION /2" = '-0" REVIEW A-SL-5 NO. ISSUE TUMBLING HOUSE - SUB ASSEMBLY - SWING SL-S SLIDE LONG SECTION SCALE:/2"=' 7 7/8" A-SL-5 5'-7 /8" 8" '-5 /2" SL-D- SL-D-4
9 SL-A-L MAIN ARCH SL-A-L '-0" '-2" 2" NON-SHRINK GROUT /4" ALL THREAD /2" SS PLATE /4" LONG /4" X 20 WELDED STUD SLIDE SL-H-L ISSUE NO. SL-D ' FOUNDATION DETAIL SCALE:/4"=' 2" ROUND PIER ' MIN DEPTH SL-A-L SL-D 2 WELD SL-R-4 TO PIPE MAIN CONNECTION PLAN DETAIL SCALE:"=' RP-7 SL-R-4 LOCK WASHER /4" 20 ACORN NUT SLIDE SL-D LOCK WASHER ACORN NUT SL-R-8 SL-R- MAIN CONNECTION DETAIL SCALE: /2"=' SL-H-P " /4X20 WELDED STUD SL-R-8 TUMBLING HOUSE - SUB ASSEMBLY -HOUSE #5 AND SLIDE SL-H-P SL-H-R SL-A-L SL-H-P SL-H-L LOCK WASHER ACORN NUT SL-H-P SLIDE DETAILS SCALE VARIES SH-R SL-R-8 " /4X20 WELDED STUD #0 /4" WOOD SCREW,/4" X 0" IPE TREAD 2X2 GALVANIZED SS TUBE SL-A-R SL-H-R /2" #0 24 FLAT HEAD BOLT WASHER ACORN NUT SLR-7 SLR-8 SLT- SLT-2 SLT- SL-D 4 FOUNDATION DETAIL SCALE:"=' SL-D 5 MAIN CONNECTION PLAN DETAIL SCALE: /2"=' SL-D MAIN CONNECTION DETAIL SCALE:"='
10 HOUSE FABICATION NO. A-SL-7 TUMBLING HOUSE - SUB ASSEMBLY -HOUSE #5 AND SLIDE ISSUE H5-F H5-F 2'- /4" HOUSE #5 PLAN HOUSE #5 RIGHT ELEVATION H5-F 2 H5-F 4 HOUSE #5 PERSPECTIVE 90 5'-7 /2" 5'- /2" HOUSE #5 BACK ELEVATION A-SL-7 4'-2 /2" 9'-5 /4" 5'- /2" 2'- /4" 2'- /4" '-5 /2" 9'-5 /4" 2'- /4" '- /4" 2'- /4" 2'- /4" 8'-" '-5 /2" 8'-" ROTATED 45 /2" SQUARE TUBE RAFTERS ROTATED 45 LEVEL TO GROUND TREADS STRUCTURAL SUPPORT NOTE: FILLET WELD ALL SEAMS 2X2" /8" WALL FLOOR JOISTS AND FRAME GROUND PLANE
11 SLS-F 2 SLIDE BEND PROFILE SLS-F UNROLLED SLIDE W/ RIBS SLS-F HANDRAIL PLAN R5 /2" R /4" R2'-7 7/" A-SL-9 SLIDE TUMBLING HOUSE - SUB ASSEMBLY - SWING NO. ISSUE /2" = '-0" A-SL-9 SLR- SLR-2 SLR- SLR-4 SLR-5 SLR- SLR-5 SLR- SLR-7 SLR-8 SLR-7 SLR-8 7/8" SLR- SLR-2 SLR- SLR-4 WELDED STUD SLS LOCATION 2 GA SS POLISHED FINISH NOTE: /2" SS LASERCUT SEE SLD-2 ASSEMBLY '- /2" 2'-0 /8" 2'-0 /8" 2'-0 /8" 2'-0 /8" PARTS RP-, RP-4 RPL- 2'-0 /4" PARTS RP-, RP-2 RPL- PARTS RP-9, RP-0 RPL-5 RP- RP-4 RPL-7 RP- RP-2 RP-9 RP-0 PARTS RP-7, RP-8 PARTS RP-5, RP- RP-7 RP-8 RPL-4 RP-5 RPL- RP- PARTS RP-, RP-4 RPL-2 PARTS RP-, RP-2 RPL- RP-4 RP- RP- RP-2 9" 9'- /4" /" '- /2" "
12 Ø 2" PIPE Z NOTE: WELD RIBS TO SLIDE PIPES +4 X -4 X ISSUE SLA-F UNROLLED SLIDE W/ RIBS +2 Y X SLA-F 2 2'- /8" R0 /8" -2 Y ARCH ROTATION PERSPECTIVE SL-A-L,R 2 GA SS POLISHED FINISH R4 /" /8" Y A-SL-8 NO. TUMBLING HOUSE - SUB ASSEMBLY -HOUSE #5 AND SLIDE R /8" R9'-2 /4" '- /2" " 9'- /4" /" ARCH R5 /2" R2'-7 7/" SLA-F ARCH BEND PROFILES SLA-F 4 SLIDE ARCH BEND PROFILE A-SL-8
TYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
32 Gallon Perforated Square Receptacle
32 Gallon Perforated Square Receptacle 992-031 24 5/" 24 5/" 39 1/2" 30 1/2" ITEM NO. PART NUMBER DESCRIPTION QTY. 1 653-006 Receptacle Base 1 2 653-045 32 Gallon Perforated Side 4 3 653-011 Arch Lid 1
STEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
Vertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
COMPARE #01-12 OCTOBER 11, Original Vroom. Vroom Garage Ceiling Bracket #9547. Installation. (with L-Brackets) Ease of.
#01-12 OCTOBER 11, 2012 The new Vroom Garage Ceiling Bracket makes it simple to attach Vroom to garage ceiling joists, meaning less installation time is needed. It only takes a third of the time just 30
Salter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
LOW PROFILE LIFEGUARD STANDS
LOW PROFILE LIFEGUARD STANDS ASSEMBLY INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334 www.srsmith.com
V nyl Gazebo truct c it Assembly Instr ons
V nyl Gazebo Vi Assembly Instr ct tr t u ru ons ct c i ti Pre-assembly Instructions A C B #1 - Site properly prepared. 4" - 6" clean stone 9 linear blocks 2" x 8" x 16" C C A A B B #1a - 12" sauna tubes,
SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
ALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
STEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
MPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
Determine the proper ground fixing stair position, by using, as a reference, the landing tread [Fig. 7].
![Determine the proper ground fixing stair position, by using, as a reference, the landing tread [Fig. 7].](/thumbs/82/86224479.jpg "Determine the proper ground fixing stair position, by using, as a reference, the landing tread [Fig. 7].")
METAL SPIRAL STAIR MOUNTING INSTRUCTIONS - ENGLISH - PRELIMINARY OPERATIONS Prior to fitting your staircase, please check the packaging content. You then place all components onto a wide surface in order
Door Canopy. PDL Building Products Industrial Parkway, N. Olmsted, OH Phone:
Door Canopy Door Canopies are attractive and efficient while eliminating the need and expense of drafting and manufacturing canopies as part of the building package. Construction: 26 gauge material around
1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"
Assembly Instructions for model: VMPR1
Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design
BARCLAY SPIRAL STAIRCASE SPECIFICATIONS
BARCLAY SPIRAL STAIRCASE Congratulations on your purchase of our Barclay 5' Spiral Staircase! Modeled on the structure of a staircase salvaged from a paper mill in the Ottawa Valley, the Barclay's decorative
Face Mount to Through-the-Post Mount
Face Mount to Through-the- Mount Cable Runs through Two Corners When going around two corners, it s necessary to tension the cable from both ends as shown in Deck 4. Use the 672 series The tensioning devices
LEAVE THIS MANUAL WITH LIFT OWNER
Wood Deck Anchor PART #: F-107EXWDA (For Spa & Pro Spa Lifts) MANDATORY LEAVE THIS MANUAL WITH LIFT OWNER Read & follow all instructions Lift safety can only be ensured if the anchor is installed and operated
Clearview Railing System Installation Instructions
Clearview Railing System Installation Instructions Disclaimer: AGS Stainless, Inc. has its Clearview Railing Systems designed by a professional engineer to meet the requirements of the latest national
4832A Installation Sheet Part List
4832A Installation Sheet Part List (1) 4016A-43-003 Qty 1- (2) 4016A-43-002 Qty 1- (3) 4016A-43-001 Qty 2- (4) 4016A-10-005 Qty 1- (5) 4016A-43-004L Qty 1- Mounting Bolt Kit (A) (K) Qty 2 - Qty 6 - M10
Instruction Manual. The Clear Choice! Aluminum Railing. Stainless Railing. Cable Railing. Trellis Systems. Maintenance Free. 316 Stainless Steel
Instruction Manual Aluminum Railing Stainless Railing Cable Railing Trellis Systems Maintenance Free 316 Stainless Steel Virtually Invisible Light Strong Durable Custom Colors The Clear Choice! 1 Table
4099T Parts List. Front Bow Assy. (1) Rear Bow Assy. (1) Long Mounting Rail (2) Short Mounting Rail (2)
4099T Parts List Ver.2 Front Bow Assy. (1) Rear Bow Assy. (1) Small Mnt Foot (2) Large Mount Foot (2) Ladder Hook (2) Ladder Stop (2) Handle Extension (1) Long Mounting Rail (2) Short Mounting Rail (2)
INSTALLATION INSTRUCTIONS MAIN BAR TIPO B 90002, 91002, 91502, 92002, 93002, 94002, 95002, 96002, y PS / B / C
Parts List: i) 4-7/16" Plastic cap Not Includes: a) 1- Driver Leg 8-3/8x1 1/2" Flat washer Kicker b) 1- Passenger Leg 8-3/8" Hex nut c) 1- Cross bar 4-3/8x 1 1/2" Carriage bolt d) 2- Mounting plate 4-3/8x
11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
HARDWARE MOUNTING HOLE BORING GUIDE FOR METAL RAILINGS
HARDWARE MOUNTING HOLE BORING GUIDE FOR METAL RAILINGS March 1, 2017 TABLE OF CONTENTS Through-the-Post Mounted Fittings Page Invisiware Receiver... 2-3 Invisiware Radius Ferrule... 4-6 Receiver with Push-Lock
This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.
This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4
J D SQUARED INC. NOTCH MASTER Tube and Pipe Notcher Operating Instructions
Copyright (c) 2006 J D SQUARED INC. www.jd2.com NOTCH MASTER Tube and Pipe Notcher Operating Instructions Angled Notches PATENT PENDING Straight Notches Offset Notches Tube Clamp Slider Tube Clamp Exploded
ROOF CURB INSTALLATION INSTRUCTIONS: VERTICAL STANDING SEAM PANEL
: p: (800) 284-1412 f: (903) 759-3598 www.lmcurbs.com 827 fisher rd longview, tx 75604 Installation Check List: Attach Sub-Frames Layout Curb on Back-up Channels Apply Sealants & Set Curb in Place Fasten
Assembly Instructions for Model: VMPR1
Assembly Instructions for Model: VMPR1 Thank you for choosing a Sanus Systems Model: VMPR1 ceiling mount. The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LC/LP
irunning Board Installation Instruction
Item Part Name QTY Item Part Name QTY 1 Step Bar 2 13 M10 Revit Insert Nuts 5 2 Passenger/Right Mounting Bracket(RB) 3 14 M10-1.5mm x 30mm Hex Bolts 5 3 Driver/Left Front Mounting Bracket(LFB) 1 15 Plastic
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
PROJECT PLANS OUTDOOR SERVING CART
R PROJECT PLANS OUTDOOR SERVING CART Make outdoor entertaining easy with this serving cart. It offers lots of space for storing food, tableware, and outdoor supplies, plus it cradles bottles where they
Dublin Stalls Installation Instructions
Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round
D HANDRAIL. Doc No. A-39. Item Description. Hand hold for deck entry or exit equipment. Available in 0.6M, 0.9M, 1.2M, 1.5M and 1.8M heights.
D HANDRAIL 1 D Handrail 1 2 M10 Flat Washer 2 Materials: 3 M10x25mm Torx Bolt 2 Hand hold for deck entry or exit equipment. Available in 0.6M, 0.9M, 1.2M, 1.5M and 1.8M heights. 1. Refer to drawings for
STRATUS SHELTER. Take bike parking to new heights
Take bike parking to new heights The Stratus Shelter is a striking bike shelter option for any transit station, university campus, or multi-family residential building project. It is constructed of American
UNIVERSAL DOUBLE BAR SAFETY GATE
N. Unit 5 Stour Valley Business Centre, Brundon Lane, Sudbury CO0 7GB Tel: 0787 377 322 - Fax: 0787 377 433 UNIVERSAL DOUBLE BAR SAFETY GATE Reversible Hinge Design EASY INSTALLATION Universal hinge design
HANDRAIL HEIGHT PER LOCAL CODE AUTORITY
WOOD END CAPS PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE HRWS-6CSLBW INSTALLATION! 3 1/16" [77.7mm] THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW
BASEBALL FOUL POLES SURFACE MOUNTED
Page 1 of 5 Installation Instructions 1. 2. Check all items against parts list to ensure all parts have been included. Locate and drill holes for concrete footings. See Details A and B for critical information
INSTALLATION INSTRUCTIONS 6 OVAL BENT END SIDEBARS DODGE RAM 1500, CREW CAB PART#: /241533B
PARTS LIST: 1 Driver/Left Sidebar 24 8mm x 24mm x 2mm Flat Washers 1 Passenger/Right Sidebar 12 8mm Lock Washers 3 Driver/left, Passenger Center and Rear 6 8mm Hex Nuts 3 INSTALLATION INSTRUCTIONS 6 OVAL
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
LOFT DOOR HANGER BARN DOORS & HARDWARE. Hardware Installation Instructions. Page
LOFT DOOR HANGER Page 1 Specifications 2 7/16" 3/8" 1-1/2 1-3/4 Ø3 3 7/8" 11-1/16 Page 2 Parts and Tools Tools Needed Tape Measure Pencil Drill with 1/8, 1/4 and 3/8 bits, 1 spade bit and Phillips bit
Oval Vinyl Gazebo. Assembly Manual
Oval Vinyl Gazebo Assembly Manual Gazebo Assembly Thank you for your purchase of this Gazebo. This manual is designed to simplify the assembly process, however we strongly recommend having an experienced
Terms of delivery: Stock items if not sold
P R O D U C T D ATA Available sizes single rail double rail gate opening SG500 UNI DG500 UNI 300-560 SG630 UNI DG630 UNI 561-685 SG760 UNI DG760 UNI 686-810 SG890 UNI DG890 UNI 811-940 This table can be
Cable Railing Kit Application Guide
Cable Railing Kit Application Guide January 2019 Nationwide Industries 10333 Windhorst Rd. Tampa, FL 33619 813.988.2628 Fax: 813.988.3465 Photo courtesy of FabWorx Framework You Will Need for Cable Railing
INSTALLATION GUIDE PermaTrak. Patented Product: U.S. Patent #5,906,084 #8,302,362 #8,522,505 #8,839,588 #9,096,975
INSTALLATION GUIDE 2009-2017 PermaTrak. Patented Product: U.S. Patent #5,906,084 #8,302,362 #8,522,505 #8,839,588 #9,096,975 Table of Contents Project Overview Forward, Acceptability Criteria, Safety,
March 1, Fax:
March 1, 2017 U.S.A. Manufacturer The Cable Connection 52 Heppner Drive Carson City, Nevada 89706 800.851.2961 775.885.1443 Fax: 775.885.2734 E-mail: info@ultra-tec.com www.ultra-tec.com Framework You
Continuous Handrail Kit Installation Instructions
Continuous Handrail Kit Installation Instructions ALUMINUM RAILING SYSTEM Canadian Version Wall Application (see page 2) Railing Application (see page 7) Wall anchors not provided Hardware included: 1x
10 x 10 Flat Top Two Tone Pergola
0 x 0 Flat Top Two Tone Pergola Models: Bordeaux ASSEMBLY GUIDE OPTIONAL ACCESSORIES Arch Kit System ( Arches) Privacy Fence Panel System ( Panels & Middle Post) Bolt Down Bracket Kit ( for Pergola) Ver.0-00
Thank you for purchasing our product! *Please read these instructions and follow them step by step.*
07/07/08.rev1 PAGE 1 OF 11 601AL VERTICAL 60120VL LIFT W/CHAIN DRIVE WINCH Thank you for purchasing our product! *Please read these instructions and follow them step by step.* Step 1. Separate and group
PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 PPM-5710 JK HEAVY DUTY SKID PLATE ASSEMBLY Version 2.0 GENERAL NOTES: These instructions are also available on our website; www.synergymfg.com.
HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY
WITH OPTIONAL S.S. S PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION
Thanks for shopping with Improvements! 7 Wood Garden Bridge with Removable Plugs Item #573366
Thanks for shopping with Improvements! 7 Wood Garden Bridge with Removable Plugs Item #73366 Note: Danger: Do not overload this bridge. This bridge is NOT REOMMENDED for weight of more than 0 lbs. Do not
Kai Installation Instructions
Kai Installation Instructions Before Beginning Installation Read through the entire instruction thoroughly A minimum of 2 people are required for this assembly These instructions reflect typical assemblies;
Assembly Instructions
Laminate/Phenolic & 1 Pc Butcherblock Tops Before you begin, please make sure all parts and proper quantities are included. (See on next page) Any parts damaged during shipment must be reported within
JUDGE'S STAND INST TOOLS: Hammer, Tape Measure, Phillips Screwdriver, 7/16" Wrench, 1/2" Wrench, 9/16" Wrench X2
888--8. Check all parts against parts list to ensure that all parts and hardware are available to complete the installation. 0 0 900 JUDGE'S STAND TOOLS: Hammer, Tape Measure, Phillips Screwdriver, /"
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
CHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
Installation instructions for FC17 Forward Controls for Triumph Rocket III Roadster
Installation instructions for FC17 Forward Controls for Triumph Rocket III Roadster It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating
DECKS. Stairway illumination Positive attachment of ledger Lateral load connection required board (R507.2) required (R ) (R311.7.
DECKS Max. riser height-7 ¾ Min. tread depth-10 Landings required at (R311.7.5.1) (R311.7.5.2) top and bottom of stairs (R311.7.6) Notched guardrail post NOT allowed Graspable handrail required Spacing
Assembly Instructions 10 X 10 Aluminum Frame Building
Assembly Instructions 10 X 10 Aluminum Frame Building 27 97 9 8 47 36 74 52 10 10 X 10 Square Building W/ Dome Includes: The Steel Entry Door with a Dead Bolt Lock assembly and Aluminum Door Frame. Metal
INSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
(6) Plastic Retainers. Passenger/Right. Passenger/Right Support Brackets
PART#R102580 PARTS LIST: 1 Driver/Left HD Running Board 4 8mm Bolt/Nut Plates 1 Passenger/Right HD Running Board 4 8mm Plastic Retainers 2 Driver/Left & Center Mount Bracket 14 8mm-1.25 x 30mm Hex Bolts
INSTITUTIONAL LIFEGUARD STAND
INSTITUTIONAL LIFEGUARD STAND ASSEMBLY INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 1017 SW Berg Parkway Canby, Oregon 97013 (503) 266-2231 Fax (503) 266-4334
Straight staircases. Practical staircase solutions, outside and indoors
Straight staircases Practical staircase solutions, outside and indoors 2 www.weland.se +46 (0) 371-344 00 Straight staircases - lightweight, attractive designs Standard Straight Flight Staircases Weland
HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT
HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT Introduction SECTION 1 Thank you for purchasing one of our fine True Focus products. This manual covers the
8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left
ATLANTIS RAIL Contact Information
ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing
2-PIECE STAIRWAY ASSEMBLY
REVISED 2/12/15 2-PIECE STAIRWAY ASSEMBLY STEP 1: LAY OUT THE RIGHT AND LEFT SIDE TOP AND BOTTOM RISER PANELS AS SHOWN IN FIGURE 1. BOLT THE SPLICE PLATE (#15114C for OSHA F SERIES; #15412C for BOCA U
O-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
technical sheet facade stabilization anchors shoulder bolt type Description
Description shoulder bolt type page: 1/5 Stabilization anchors must be installed in buildings over 130 (150 or 45m in Canada), with the first on being no more then 50 from the top of the building. The
A Step-by-Step How To Guide
HOW TO REMODEL YOUR STAIR A Step-by-Step How To Guide Add new life to your staircase and achieve professional results. 1 Renovating your staircase is more than a remodel, it s a transformation of your
HOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
INSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
Passenger/Right Front Mounting Bracket
PARTS LIST: 1 Driver side running board 1 8mm Insert Installation Tool 1 Passenger side running board 4 10-1.50mm x 35mm Hex Bolt 1 Driver 10 10mm x 24mm OD x 2.2mm Flat Washer 1 Passenger 6 10mm Lock
#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
INSTALLATION INSTRUCTIONS
TreadClimber INSTALLATION INSTRUCTIONS STAR TRAC FITNESS 1 of 14 635-4175 Rev: B NOTICE Installation of this product requires that 2 or more people are available to safely perform certain steps outlined
GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:
PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers
BSM, GSM & GSS. Joint Kit Instruction. (Modified for IMPACT) (NSF Certified) Curved Glass Fresh Meat Delicatessen and Seafood Merchandisers
BSM, GSM & GSS Joint Kit Instruction (Modified for IMPACT) (NSF Certified) Curved Glass Fresh Meat Delicatessen and Seafood Merchandisers February, 1999 JOINT ASSEMBLY PARTS LIST Item Quantity Description
BRIDGE RAILING, 4 TUBE B-26-F POST DETAILS MICHIGAN DEPARTMENT OF TRANSPORTATION
\ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x 6" SLOTTED ROUND HEAD BOLTS, WITH 1 PLATE WASHER, 1 LOCK WASHER AND HEX. NUT \ ƒ" x 1 " SLOTTED HOLE IN POST AND \ ƒ"! HOLE IN RAIL \ "! x
Kit 102 Series Installation Instructions for Wood or Metal Posts on Level Runs
Kit 102 Series Installation Instructions for Wood or Metal Posts on Level Runs A. Drill Posts Hole size for 1/8" or 3/16" cable installation This kit may also be used for stairs or runs that exit the end
DIY Lowery Inspired Embroidery Floor Stand
DIY Lowery Inspired Embroidery Floor Stand Below find the details on how to build your own embroidery floor stand. The Lowery Floor Stand inspired this design. Note using the following instructions will
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA North Las Vegas, NV 89030
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com
HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
![HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8 [161.9mm]](/thumbs/74/70647988.jpg "HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8 [161.9mm]")
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED
HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8" [161.9mm]
![HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8 [161.9mm]](/thumbs/79/79002604.jpg "HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY. 6 3/8 [161.9mm]")
PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE P-RSAN-INT INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS
Passenger/Right Center and Rear Support Brackets. Driver/Left Center and
PARTS LIST: 1 Driver/Left HD Running Board 24 8mm x 24mm OD x 2mm Flat Washers 1 Passenger/Right HD Running Board 12 s 3 Driver/Left front, passenger center/rear Support Brackets 6 8mm-1.25 Hex Nuts 3
Staircase and Handrail Parts
Staircase and Handrail Parts hammersmith.com.au 2 CONTENTS HANDRAIL & BRACKETS Designer Rail page 3 Ezirail 2.0 page 4-5 Heritage Rail page 6 Zipbolt page 7 Victorian Rail page 8 Mono Rail page 8 Handrail
WAREHOUSE HANGER INSTALLATION INSTRUCTIONS R H INS T A L L A TIO N INS T R U C TIO N S
INS T A L L A TIO N INS T R U C TIO N S WAREHOUSE HANGER NOTE: Due to the size and weight of the Warehouse Hanger it is recommended that this Hanger be installed on 3 4 or wider doors. 10.11.2016 2-3/16"
INSTALLATION INSTRUCTIONS INS T A L L A TIO N INS T R U C TIO N S ROD IRON SCROLL HANGER R H
INS T A L L A TIO N INS T R U C TIO N S ROD IRON SCROLL HANGER 10.5.2016 2-1- 3/16" 11/16" 8" 8 O 2-7/8 Ø2-7/8" 3-1/2 3-1/2" 12-9/16 12-9/16" PLEASE NOTE: These instructions are specific to a particular
Kwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
ULT R A S PACE SAV E R SQ UA R E D
ULT R A S PACE SAV E R SQ UA R E D Hip to be Square Dero s Ultra Space Saver Squared offers high-security, vertical bike parking. Adjustable sliding arms make it easy for customers to best utilize their
8030 Synergy Jeep JK Rear Long Arm Frame Brackets
General Notes: SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397 8030 Synergy Jeep JK Rear Long Arm Frame Brackets These instructions are also available on our website; www.synergymfg.com.
40993 Parts List. Front Bow Assy.(1) Rear Bow Assy.(1)
40993 Parts List Front Bow Assy.(1) Rear Bow Assy.(1) Rail Mnt Foot(4) Ladder Hook (2) Ladder Stop (2) Mounting Clip-ProMaster Only (6) Mounting Bracket(6) Long Mounting Rail(2) Short Mounting Rail(2)
A - Railing Frame Material Specifications
A - Railing Frame Material Specifications NOTE: We strongly recommend stainless steel for exterior applications. R-1 8/1/02 B Stainless Steel Spacers (For Horizontal Railing Double Post End Post using
Bulkhead Model Number and
Bulkhead Model Number 96141-3-01 and 96142-3-01 Installing your ProMaster bulkhead is very clear cut following these instructions. Before cutting or drilling in the floor, verify the location of you gas
Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Top Support Kit: (x2) - 2 Top Supports. Quantities are per bench
Parts Included (per back to back bench) Column Kit: (x2) - 1 LH & 1 RH Column - Control Box - Hand Switch Cable Tray Kit: - Cable Tray - Cable Tray Cover - Power Block Support (x2) Depth Support Kit: -