Cool Christmas. Instructions. YOU WILL NEED: Pegboards: 4 Large squares. Front Left Side Right Side Base. Fusing Instructions Only Adults Iron

Transcription

1 YOU WILL NEED: Pegboards: 4 Large squares Other: Scissors Clear tape Bead Colors: Pink - 32 Blush - 78 Red Cranapple Yellow - 44 Cheddar Orange - 93 Toothpaste * Light Green Parrot Green Dark Green Light Blue Dark Blue - 75 Pastel Lavender - 10 Brown Grey - 42 Black White * Pink Candy Stripe - 2 Cinnamon Stripe - 15 Fire Stripe - 2 Buttercream Stripe - 84 Cucumber Stripe - 61 Sky Blue Stripe - 30 Grape Stripe - 54 Silver Pearl Stripe * You will need 2 bags of Toothpaste beads, and 3 bags of White beads. Instructions 1. Some of the patterns require 2 or all 4 of the pegboards assembled together as shown below. Cut these patterns out and tape together in the same way. If you are using clear pegboards, slide the actual-size patterns underneath them. Place your beads on the pegboards as shown. 2. Ask an adult to fuse your designs see bottom for further instructions. Front Left Side Right Side Base Fusing Instructions Only Adults Iron 1. Place your pegboard on a flat, heat-safe surface. 2. Set a household iron to the medium setting. Place ironing paper over the pegboard. In a circular motion, begin to iron the project. Do not press down with the iron. As the beads begin to fuse, you will see circles of the beads start to show through the paper. When ironed properly, the beads will still have an open center. Let the design cool. 3. Remove the paper and bead design from the peg board. Flip the design over to expose the non-fused side. Repeat step two. Let cool completely. NOTE: Beads need heat for about seconds per side to fuse evenly. Lift the paper occasionally to see how the beads are fusing. Depending on the size of the project, additional heating time may be required. DO NOT OVER-IRON the beads as it will make the centers of the beads close and can make the assembly you do with your project more challenging. 1

2 Bead Colors: Pink Red Cranapple Yellow Cheddar Orange Toothpaste Light Green Parrot Green Dark Green Light Blue Dark Blue Pastel Lavender Grey Black White Pink Candy Stripe Fire Stripe Buttercream Stripe Cucumber Stripe Sky Blue Stripe Silver Pearl Stripe Front: Quadrant 1 2

3 Front: Quadrant 2 3

4 Front: Quadrant 3 4

5 Front: Quadrant 4 5

6 Bead Colors: Cranapple Cheddar Toothpaste Light Green Parrot Green Dark Green White Buttercream Stripe Cucumber Stripe Grape Stripe Silver Pearl Stripe Left Side: Top 6

7 Left Side: Bottom 7

8 Bead Colors: Blush Red Yellow Toothpaste Parrot Green Dark Green White Buttercream Stripe Cucumber Stripe Silver Pearl Stripe Right Side: Top 8

9 Right Side: Bottom 9

10 Bead Colors: Toothpaste Light Blue White Silver Pearl Stripe Base: Quadrant 1 10

11 Base: Quadrant 2 11

12 Base: Quadrant 3 12

13 Base: Quadrant 4 13

14 Bead Colors: Red Yellow Cheddar Orange Toothpaste Parrot Green Dark Green Brown Grey Black White Cinnamon Stripe Buttercream Stripe Cucumber Stripe Sky Blue Stripe Penguins Fence Lamp Post (2 pieces) Stand Make 2 each 14

15 Assembly 1. Penguins: Slide penguins feet into the stands. 3. Final Assembly: Holding the left side perpendicular to the front piece, slide the two pieces together along the long slots on each. Do the same with the right side. Insert the tabs of these assembled pieces into the slots in the base. 2. Lamp Posts: Turn the two lamp post pieces perpendicular to each other slide together at the slots. Insert the lamp posts and fence pieces into the base. Place the penguins on the pond. Perler Beads and EKSuccess Brands are either registered trademarks or trademarks of Dimensions Crafts LLC and EK Success Ltd. respectively in the United States and/or other countries Dimensions Crafts LLC. All rights reserved. 15