Hot Glass Studio Access and Equipment Hire Costs
|
|
|
- Loreen Wilcox
- 6 years ago
- Views:
Transcription
1 Hot Glass Studio Access and Equipment Hire Costs
2 Water Jet Cutter Hot Glass Studio 1 Diamond Flatbed Grinder Flat Bed Grinders Hot Glass Studio 1
3 Facilities at National Glass Centre include: 2 x Hotshops SPECIAL OFFER vat per day. Subject to availability. 10 days notice required. Max 3 days discounted hire per calendar month. Terms & conditions apply. 15kg of glass included, per booking, additional glass usage vat per kg. Standard Commercial rate vat per day. 30kg glass included, additional glass usage vat per kg x electric Falorni furnaces (running simultaneously) 7 x glory holes (Ø300x600-1 off, Ø400x600 5 off, Ø500x off) 2 x pipe warmers 2 small pickup kilns 2 x large top loading casting kilns (D50 X W90 X H48) 7 x lehrs 6 x blowing benches Hire: 10am 4.30pm, with a 30min lunch break includes the following: 1 x furnace. Pot holds approx 100 kgs Glasma glass 1 x bench 1 x annealing oven 1 day included 1 x shared pipe warmer 1 x standard glory hole (Ø400 x 600mm, with split doors at Ø150 & 200mm) 1 x Colour pick up kiln 1 x oxy-propane torch 1 x compressed air line A selection of pipes and irons Also available: lehr hire additional days 25 + vat per day. large oxy-propane torch 15 + vat per day small top-loader kiln 5 + vat per day additional glory holes 20 to 25 + vat per day large top loader kiln 25 + vat per day, 15 per day thereafter Hot Glass Studio 1 Hot Glass Studio 2
4 Cold working facilities From vat per hour: charged in 1hr units (consumables not supplied) 9am - 5pm vat per day payable in advance. 2 x Diamond saws - Ø 34cm blade 1 x large diamond saw Ø 50cm blade 4 x linishers assorted belts 2 x Diamond pillar drill Habit shank 4 x sandblasters 1 x Guyson GT2 Side-loader W80xD70xH75 1 x Guyson Side + large panel access W80xD70xH75 1 x Guyson Front loader W75xD50xH60 1 x Vixen small Side-loader W70xD50xH25 2 x Flatbed grinder Ø 76cm: grits only 3 x flatbed grinders Ø 60cm 1 x cerium oxide flatbed grinders Ø 45cm by special arrangement, T&C s apply 1 x diamond flatbed Ø 60cm by special arrangement, T&C s apply 2 x Ø30 rociprolaps by special arrangement 5 x polishing lathes max cork wheel Ø 40cm, felt/cerium oxide wheel 3 x cutting lathes 2 x engraving lathes 1 x Wax melting pot 1 x vinamould melting pot 1 x flexible drive 2 x Ø4 diameter pneumatic hand grinders 1 x Suhner grinder and polisher Cold Shop Diamond Saw
5 Reciprolaps Pneumatic Grinding Station Glaze Room
6 Kiln Hire: Moog Casting Kiln Please enquire for prices from vat per day 1 x huge glass casting kiln W2.5M x D1.55M x H0.80M 1 x large glass casting kiln W130 x D70 x H70 1 x very large flatbed kiln W150 x D12 1 x large flatbed kiln W150 x D10 2 x medium flatbed kilns W120 x D95, & W100 x D70 2 x large ceramic gas kiln 25 + small, medium and large casting kilns, plus 10 ceramic kilns Large Flatbed Kiln Selection of Electric Kilns
7 Lampworking area: 20 half day (3.5 hrs), or rate 30 + vat per day (consumables not supplied) Payable in advance 7 x workstations with torches Water-jet cutter: Please contact us if you have an enquiry Flame Working Area Water Jet Cutter Silk screen printing facilities: 15 half day (3.5 hrs), or 30 + vat per day (consumables not supplied) Payable in advance 1 x light table W150xD150 1 x UV exposure unit W145xD95 1 x vacuum print table W140xD85 1 x water-jet screen wash area Screen Printing Area
8 Mould-making facilities glass & ceramics: 15 half day, or 30 +vat per day (consumables not supplied) 9am - 5pm. Payable in advance Extensive plaster / molochite mould making facilities Vinamould melting pot Wax steaming out area Glaze mixing & spray facilities 3 x plaster lathes 1 x whirler / jigger-jolley Slip casting workshop Assorted ceramic facilities Plaster Studio Ceramic Studio Ceramics Studio
9 Our studios and equipment can be hired 7 days a week, subject to availability. Please contact National Glass Centre Studio for enquiries about hiring: + 44 (0) (Option 3) Our Studio Team chris.blade@nationalglasscentre.com +44 (0) tim.betterton@sunderland.ac.uk +44 (0) Joanna.o-hara@sunderland.ac.uk +44 (0) ashley.woods@sunderland.ac.uk +44 (0) National Glass Centre facility hire does not include consumables or technical support unless agreed in advance. Please let us know is you would like advice on sourcing materials or equipment. CANCELLATION FEES: Please note that cancellations of hot shop hire facilities need to be made in writing/ In order to benefit from the discounted hot shop offer, bookings must be confirmed 10 days in advance. Cancelations with more than 7 days notice will attract a 50% refund. Terms and conditions should be read in conjunction with the above and may be subject to change without notice. Proof of adequate (min 5M) Public Liability Insurance must be provided prior to your hire session. If you are using assistants we will require proof your policy adequately covers them. See Terms & Conditions for further information. Please note that hire cannot commence without suitable insurance documentation. Hire of hot shop facilities for teaching private classes must be discussed with the Head of Enterprise & the Studio prior to booking as separate Health & Safety, induction and insurance issues may have to be reviewed. Did you know National Glass Centre is home to the University of Sunderland s Glass and Ceramics Department? We offer a range of formal courses including Foundation/Level 0 Art and Design, BA (Hons) Glass and Ceramics undergraduate and postgraduate programmes, for further information visit nationalglasscentre.com/learn
Open Kilnforming Studio Portland
Open Kilnforming Studio Portland If you ve completed at least one class at Bullseye, you re eligible to attend Open Studio sessions. Bring your Bullseye glass to the Resource Center studio and enjoy access
Open Kilnforming Studio Bay Area
Open Kilnforming Studio Bay Area If you ve completed at least one class at Bullseye, you re eligible to attend Open Studio sessions. Bring your Bullseye glass to the Resource Center studio and enjoy access
Denver Glass Machinery, Inc. Price Pages 2018
Page 4 SB-810BASE STUDIO MODEL BEVELER (BASE MACHINE)... $2,950.00 SB-810SE STANDARD ELECTROPLATED DIAMOND VERSION... $3,500.00 SB-810SB STANDARD BONDED DIAMOND VERSION... $4050.00 SB-810AE ALL ELECTROPLATED
Skill Development Programme Certificate course in Advance Machining/Advance Welding 11 th March 29 th March 2019
Skill Development Programme 11 th March 29 th March 2019 CENTRAL WORKSHOP CSIR-INSTITUE OF MINERALS & MATERIALS TECHNOLOGY The Central Mechanical Workshop of CSIR-Institute of Minerals & Materials Technology
Make a Pencil Holder. Description. Lesson Objectives. Assumptions. Terminology
Youth Explore Trades Skills Make a Pencil Holder Description Welders are required to work with many other metalworking trades. To be successful as a welder one must have an understanding of many other
WORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
WORKING ARTIST PROGRAM
WORKING ARTIST PROGRAM LU Design in Craft CERAMICS JEWELRY & METALSMITHING PAPER MAKING & BOOK BINDING Longwood University s Post-Baccalaureate Program aka the Working Artist Program is for artists who
Cutting Edge: RAM Explores Contemporary Glass Jewelry October 28, 2012 February 17, 2013
Racine Art Museum 441 Main Street Racine, Wisconsin 53401-0187 p 262.638.8300 f 262.898.1045 www.ramart.org Cutting Edge: RAM Explores Contemporary Glass Jewelry October 28, 2012 February 17, 2013 Exhibition
STUDIO ARTS FOR AGES 14-18
STUDIO ARTS FOR AGES 14-18 1 Snow Farm Summer provides creative young people with the rare opportunity to study and work with professional artists in a supportive and engaging environment. AT SNOW FARM
Koster Industries, Inc.
Koster Industries, Inc. Surplus Jewelry Manufacturing Machinery - Hawthorne, CA Late Model 2 & 4-Hi Rolling Mills * Multi-Slitter * 50 & 200-Ton Hydraulic Coining/Stamping Presses * Melting Furnaces *
Protection of Propeller shaft
APPLICATION REPORT Protection of Propeller shaft Application: Place: Protection against bi-metallic corrosion on propeller shaft. Workshop - Chile Date: January 2015 Job and report done by: Wencon products
Course Guide. New Courses. Stained Glass Glass Fusing Painting on Glass Lampwork Bead-Making and much more inside!
Course Guide Stained Glass Glass Fusing Painting on Glass Lampwork Bead-Making and much more inside! New Courses Creative Glass Guild, Unit 4 St Philips Central, St Philips, Bristol, BS2 0XJ Tel: 0117
STUDIO USER GUIDE FOR HOT SHOP AND COLD SHOP
STUDIO USER GUIDE FOR HOT SHOP AND COLD SHOP Updated January 2017 CONTENTS Introduction History Mission Vision Commitment to Racial Equity General Information Conditions for Access Waiver Agreement Acknowledgement
Machine Tool Traders. https://www.indiamart.com/machinetooltraders/
+91-8048017968 Machine Tool Traders https://www.indiamart.com/machinetooltraders/ we are one of the leading Manufacturer, Exporter and Supplier of Sheet and Wire Rolling Machines, Diamond Faceting Machines,
This course builds on your existing skills in glass cutting, either from having worked with stained glass or with kiln-formed glass.
SHORT COURSE DETAILS S4D07726 MAKING COLOURED GLASS BOWLS Tutor: Dates: ALEX POWELL 4 DAYS WEDNESDAY 21 MARCH SUNDAY 25 MARCH ABOUT YOUR COURSE: This course builds on your existing skills in glass cutting,
Receiver Hitch and Pin
Receiver Hitch and Pin Description: The hitch is used with a standard 2 receiver hitch commonly found on trucks and SUVs. It can be fitted with any size ball. It may be mounted up or down depending on
6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
Design and Technology Resistant materials Key words and definitions
Design and Technology Resistant materials Key words and definitions Word Acrylic Definition a type of thermoplastic, which is hard and can be transparent. Used to make shop signs. Perspex is a trade/brand
BSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
SODACOLOUR 104 COLOURED SODA LIME GLASS
SODACOLOUR 104 COLOURED SODA LIME GLASS Length of rods app. 300-500 mm Diameters 4 to 8 mm not assorted Rods can show deviations in diameter and can be oval or not even Ends are furnace cut Small segregations
GRINDERS 86 SAWS 86-90
sawing, cutting & grinding GRINDERS 86 SAWS 86-90 MINI GRINDER Cuts and grinds masonry, concrete and metal. Cuts to a depth of 25mm Can be fitted with surface grinding wheel for facing and grinding Powerful
PRODUCT CATALOGUE FOR GLASS ENGRAVERS
PRODUCT CATALOGUE FOR GLASS ENGRAVERS POLPUR, LTD. FOUNDED IN 1991, IS WHOLLY A CZECH COMPANY. We develop and produce polishing, lapping and grinding tools, especially for the glass, jewellery and optical
VAUGHANS (Hope Works)
CRUCIBLE FURNACE & SPARES FL-CM450 CM450 SAFTEY TILT CRUCIBLE FURNACE Runs on either Natural Gas or on LPG bottled gas Melts up to 2 litres of Aluminium in 35 minutes Temperature range - 950 C to 1000
TIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
RM-48 - Radius Master Pedestal Belt Grinder / Linisher - Series 2 50 x 1220mm Belt Size 7 Work Stations Ex GST Inc GST
RM-48 - Radius Master Pedestal Belt Grinder / Linisher - Series 2 50 x 1220mm Belt Size 7 Work Stations Ex GST Inc GST $2,090.00 $2,299.00 ORDER CODE: L096 MODEL: RM-48 Type: Belt Grinder / Linisher Mounting
Standard Operating Procedure for Ceramics Area Tyler School of Art Jan 19, 2009
Standard Operating Procedure for Ceramics Area Tyler School of Art Jan 19, 2009 The following guidelines determine the proper use and access to all Ceramics Area spaces. The spaces outlined in this policy
Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
ABRASIVE CATALOGS. Application: Weld dressing Cutting off smoothing of Casting Can be applied on various kind of Steel and non-ferrous materials
ABRASIVE CATALOGS Reinforced Depressed Centre Grinding Discs are excellently fabricated depressed centre grinding discs that are exclusively available in varying diameters of 4-9 in different thickness.
Splashback Installation Instructions
Splashback Installation Instructions What is Akril? Akril is an Australian made environmentally friendly, highly engineered polymer, enhanced with colour. Quite simply, it offers a new source of design
A SYNOPSIS OF LOST WAX CASTING
A SYNOPSIS OF LOST WAX CASTING Casting is the process of carving a wax model using jeweler s wax. Jeweler s wax is very hard and feels like plastic. It comes in different sizes, shapes, and hardness. The
INDUTHERM Mini Vacuum Pressure Casting Machine MC 20V
INDUTHERM Mini Vacuum Pressure Casting Machine MC 20V Advanced induction heated casting machine for all standard alloys like gold, silver steel, palladium and platinum alloys are possible to cast. MC 20
Hand Tools and Power Tools
Lesson Outcomes The student will be able to: Identify a variety of hand tools and power tools and describe their purpose, application and how they are operated in a safe and proper manner. A wide variety
Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm
Galloway Woodturners Auction 2016 Sunday 23 October 2016, Viewing 11am, Auction starts 1pm 001 DeLonghi Radia 1500W heater 002 Bench grinder, Clarke 6", CBG6RP 003 Reciprocating saw, Workzone 710W, 004
FILE - DIAMOND GRIND CONCRETE STEPS
15 July, 2018 FILE - DIAMOND GRIND CONCRETE STEPS Document Filetype: PDF 296.51 KB 0 FILE - DIAMOND GRIND CONCRETE STEPS A wide variety of concrete steps options are available to. 7 Step 50-1500 Grit Diamond
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
1 SELECT suitable material. It takes time to cut a cab. Don t waste it on rubbish.
7 July 09 CUTTING A STANDARD CABOCHON A Standard Cabochon or CAB is an oval or round stone with one flat side and the other side having an even curved dome shape. Top of Cab It will have a narrow bevel
grinding technologies
grinding technologies SPECIAL OFFERS February 2013 MX150 1500 KNIFE GRINDER MX150 1500 Knife grinder Magnetic chuck 1500*120mm; PLC controlling automatic down-feed, automatic working cycle, spark-out and
Introduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
2 WOOD AND METAL SHOP 3 SAFETY GUIDELINES 4 COMMUNITY PRACTICES 5 TOOL CHECKOUT PROCEDURES 6 MATERIALS PURCHASING 7 AUTHORIZATION PROCEDURES
0 CONTENTS 1 WELCOME 2 WOOD AND METAL SHOP 3 SAFETY GUIDELINES 4 COMMUNITY PRACTICES 5 TOOL CHECKOUT PROCEDURES 6 MATERIALS PURCHASING 7 AUTHORIZATION PROCEDURES 1 WELCOME The Logan Center Shop is a dynamic
MC60 - Mini Vacuum Pressure Casting Machine
MC60 - Mini Vacuum Pressure Casting Machine Advanced induction heated casting machine for jewellery alloys like gold, silver, brass, bronze or similar. The MC 60 offers excellent results for the smaller
Joe Finch Clay Kiln. Method: Make catenary arch former (65cm wide, 65cm high and 85cm long)
Joe Finch Clay Kiln As with any kiln care must be taken in the construction, sighting and firing of this kiln. For the first firing (if you are firing to biscuit or glaze) you must take the first 700c
MC16 Mini Vacuum Pressure Casting Machine
MC16 Mini Vacuum Pressure Casting Machine Advanced induction heated casting machine for all standard alloys like gold, silver steel, palladium and platinum alloys are possible to cast. MC 16 offers excellent
Ballast pipe system, leaking
APPLICATION REPORT Ballast pipe system, leaking Application: Place: Repair of approx. 50 leaks on ballast system Offshore, Congo Africa Date: November 2005 Job and report done by: Wencon products used:
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
ndesigns Metal Jewelry and Objects by Nancy Lee Metalsmithing Class Descriptions Instructor: Nancy Lee
Wednesday Afternoon Workshop, 1-4PM Level: All Levels basic Metalsmithing skills required This class is an open forum for serious beginners and beyond. Enjoy the use of a full complement of metalworking
Name: Class: Teacher:..
Name: Class: Teacher:.. 1 Metals All metals in use today are either PURE METALS or ALLOYS. Copper, iron, tin, lead, gold and silver are all examples of PURE METALS which have been mined from the Earth
ACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
Magic Mandala. Shopping / material list Magic Mandala. Have fun crafting! You can find more creative tips at
Magic Mandala The creative way to relax! Mandala colouring is relaxing, meditative, creative and now decorative too. Not only is it fun, it stimulates creativity. Ready, steady, pick your favourite colours
David Reekie - Mould making and Glass Casting Methods
David Reekie - Mould making and Glass Casting Methods David says of his work that "through surreal uses of situation and perception. I have tried to illustra aspects of human behaviour. often I used ironic.
Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
INTRODUCTION. Dear Business Partners,
INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,
Making a basic hook tool By Alan Lacer
Making a basic hook tool By Alan Lacer The hook tool is essentially a right-angle gouge that enables the woodturner doing inside end-grain hollowing to achieve two goals: work with the grain and use a
POWER CARVERS/ACCESSORIES
16 POWER CARVERS/ACCESSORIES Foredom Tools and Accessories Foredom No. 8 handpiece - slim handpiece. Chuck guard sleeve protects fingers and permits close work. Slides back when changing accessories. Includes
Grinders, Sanders, Drills, Lathes, Saws, Shear, Break, Punch, And Roller
Grinders, Sanders, Drills, Lathes, Saws, Shear, Break, Punch, And Roller Personal Protective Equipment: A welder must be aware of possible dangers to the body during any welding or cutting operation and
INDUTHERM Mini Vacuum Pressure Casting Machine MC 20V
INDUTHERM Mini Vacuum Pressure Casting Machine MC 20V Advanced induction heated casting machine for all standard alloys like gold, silver steel, palladium and platinum alloys are possible to cast. MC 20
IWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
North Alabama Woodturners Boaz, Alabama
North Alabama Woodturners Boaz, Alabama Hosting Nationally Known Turner John Lucas John is recognized nationally as a woodturner, artist, author and photographer. Come and spend the day and leave a better
CUTTING. The direction of the slabs 01. Planning cut-outs CUTTING WITH A DISC CUTTER 02. Making cut-outs with a disc cutter 04
CONTENTS 1. INTRODUCTION 01 The direction of the slabs 01 Planning cut-outs 01 2. CUTTING WITH A DISC CUTTER 02 3. MAKING CUT-OUTS 04 Making cut-outs with a disc cutter 04 Tips when using a CNC router
IWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
Perfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.
FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).
Scored Gear shaft APPLICATION REPORT. Application: Scored Gear shaft. Place: Frederikshavn, Denmark. Date: January Job and report done by:
APPLICATION REPORT Scored Gear shaft Application: Place: Scored Gear shaft Frederikshavn, Denmark Date: January 2009 Job and report done by: Wencon products used: Wencon technical Supervisor Hi-Temp, Putty,
ON CENTRE 2019 AIMS STRUCTURE
ON CENTRE 2019 January 6 th March 30 st 2019 DESCRIPTION and OUTLINE PROGRAMME AIMS The course has three main aims: 1. The MAJOR aim is that participants achieve the CONFIDENCE and FLUENCY which come from
D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L
UNIT D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L metalwork processes Screw Threads The screw thread is a very important detail in engineering. It is used to hold parts together.
BANDS ROLLS SAW BLADES BELTS SHEETS DISCS STARS STRIPS FLAPS WHEELS FILES
BANDS Coated Abrasive Bands...214 Non-Woven Nylon Bands...214 BELTS Coated Abrasive Belts...209 Cloth Polishing Belts...213 Non-Woven Nylon Belts...212 DISCS Clean n Strip Discs...218 Coated Abrasive Discs...216
6043 DESIGN AND TECHNOLOGY
UNIVERSITY OF CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level www.xtremepapers.com MARK SCHEME for the October/November 2008 question paper 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1 (Technology),
BRUSHES WITH SHANK 60 61
60 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0. 0.0 STH 0.0 0.00 ROH 0.0 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 7 9 /8 /8 8,000 0 7.98.
RIM 3 Wheel For wet and dry grinding. AC TURBO Wheel For wet and dry grinding. AC SWIRLY Wheel For wet and dry grinding
Diamond Tools RIM 3 Wheel For wet and dry grinding Ø 100 # 36, 50, 80, 120, 220 SF, M14 80.00 AC TURBO Wheel For wet and dry grinding Diameter Grits Connection Shape Price 02005 88.00 Ø 100 # 36, 50, 80,
Manufacturing Processes (continued)
Manufacturing (continued) Machining Some other processes Material compatibilities Process (shape) capabilities Manufacturing costs Correct pg 142, question 34i should read Fig 6.18 question 34j should
Manufacturers of Wood Working Machineries
RUEI RUEI R Manufacturers of Wood Working Machineries RUEI www.rueiindustries.com RUEI 2 Welcome to Ruei Industries..! RUEI INDUSTRIES, is one of the leading manufacturer, supplier and exporter of Wood
CARIBBEAN EXAMINATIONS SECONDARY EDUCATION CERTIFICATE EXAMINATION MECHANICAL ENGINEERING TECHNOLOGY. Paper 02 - Technical Proficiency.
FORM TP 2011094 CARIBBEAN EXAMINATIONS SECONDARY EDUCATION CERTIFICATE EXAMINATION TEST CODE 01335020 COUNCIL MECHANICAL ENGINEERING TECHNOLOGY Paper 02 - Technical Proficiency 2'h hours MAY/JUNE 2011
EVENING COURSES. Clay Portraiture Tutor: Duncan Robertson Tuesday 6.30pm 9pm 9 May 4 July 9 weeks / 22.5 hours 195 / 10 places
EDINBURGH SCULPTURE WORKSHOP COURSES PROGRAMME SUMMER EVENING COURSES Clay Portraiture Tutor: Duncan Robertson Tuesday 6.30pm 9pm 9 May 4 July 9 weeks / 22.5 hours 195 / 10 places This very popular course
TECHNOLOGY FOR WINDOWMAKERS
www.vertongen.be PENTHO COMPACT 3/4 PENTHO COMPACT 3 PENTHO COMPACT 4 UNIVERSAL TENONER ADVANCED TENONER The table can be swivelled 60 in two directions. The working area of the table does not change.
Tuck tie in shirt, roll up sleeves, wear protective apron or lab. coat. High risk
Risk Assessment Exercises The table below lists some typical D&T activities and the risks involved in carrying them out. Assess each activity as either a high risk, low risk or no risk activity and state
Build an Aluminum Whistle
Youth Explore Trades Skills Description In this activity plan the students will further develop their machining and metalworking skills by fabricating a two-piece aluminum whistle. The project will cover
Kiln Posts Durable high alumina posts for use up to cone 10. We suggest using three posts per shelf.
Kiln Shelves Please note that kiln shelves are fragile. If you live within the lower mainland, we suggest you pick them up in person. If long-distance shipping is necessary, kiln shelves do best if packed
Greenfaulds High School
Greenfaulds High School Technical Department Standard Grade Craft & Design Knowledge & Understanding In Metal Page 1 Metals All metals in use today are either PURE METALS or ALLOYS. Copper, iron, tin,
LibertyTown Arts Workshop Pottery Studio Guidelines
LibertyTown Arts Workshop Pottery Studio Guidelines Welcome to LibertyTown s Pottery Studio! Here are a few important things you should know about the room: HOURS LibertyTown is open from 10am to 8pm Monday
Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
Cutting, Drilling and Beveling
Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized
A1, CNC Turning Centre with Slant Bed, CNC 1 A2, CNC Turning Centre, CNC 2 A3, CNC Turning Centre, CNC 4, CNC 5 A4, CNC Turning Centre, CNC 9
A1, CNC Turning Centre with Slant Bed, CNC 1 A2, CNC Turning Centre, CNC 2 A3, CNC Turning Centre, CNC 4, CNC 5 A4, CNC Turning Centre, CNC 9 A5, CNC Turning Centre, CNC 8 A6, CNC Turning Centre, CNC 10
YELLOWKNIFE GUILD OF ARTS AND CRAFTS
YELLOWKNIFE GUILD OF ARTS AND CRAFTS May 2013 GUILD MEMBERSHIP 1. All Guild memberships are valid for a period coinciding with the fiscal year of the Guild, being April 1 through March 31, and must be
GENERAL REPAIR INSTRUCTIONS Work Precautions
IN-10 GENERAL REPAIR INSTRUCTIONS Work Precautions SAFETY Never stand in direct line with the chain when using a puller on the body or frame, and be sure to attach a safety cable. VEHICLE PROTECTION When
+91-8048601470 Hi - Tech Industrial Implements http://www.hitechimplements.net/ We are engaged in supplying of Welding Machine Tools of high quality at reasonable prices. Our products are sourced from
Guide to choosing the modules that make up a robot cell for:
Guide to choosing the modules that make up a robot cell for: D E B U R R I N G C U T T I N G P O L I S H I N G G R I N D I N G L I N I S H I N G F I N I S H I N G F E T T L I N G Surtech offer you the
Ceramics/Wet Shop. Information, Policy & Protocols
Ceramics/Wet Shop Information, Policy & Protocols 2016 2017 1. General Policy Student safety is our #1 priority. Shop technicians have the final word on your working conditions. You must follow the safety
PRESS RELEASE SECOND SESSION - GLASS IS TOMORROW DOMAINE DE BOISBUCHET - CIRECA THE CORNING MUSEUM OF GLASS & GLASSLAB 8 14 SEPTEMBER 2013
PRESS RELEASE SECOND SESSION - GLASS IS TOMORROW DOMAINE DE BOISBUCHET - CIRECA THE CORNING MUSEUM OF GLASS & GLASSLAB WITH THE SUPPORT OF THE «CULTURE» PROGRAMME OF THE EUROPEAN UNION PARTNERS ASSOCIATED
Turning a CrushGrind shaft grinder without using glue
Turning a CrushGrind shaft grinder without using glue A step-by-step approach to removing the apprehension 1 Chris West Content Introduction 3 Robert Sorby CrushGrind Recess Cutting Tool 4 Required tools
Special Offers. December New! Sharpening machine for domestic knives and scissors.
December 2011 Special Offers! Sharpening machine for domestic knives and scissors. MVM Srl 42015 Correggio (RE) ITALY- Via del Progresso, 14 Tel. (+ 39) 0522 632266 - Fax (+ 39) 0522 642011 Email: mvmsrl@mvmsrl.it
Pewter Cast Collar and Threaded Finial
Pewter Cast Collar and Threaded Finial Bob Roehrig Pewter is a malleable metal alloy. It is traditionally composed of 85 99% tin, mixed with copper, antimony, bismuth, and sometimes lead, although the
LGCSE DESIGN AND TECHNOLOGY 0189 REPORT FOR TEACHERS
LGCSE DESIGN AND TECHNOLOGY 0189 REPORT FOR TEACHERS The 2016 Design and technology Paper was composed of 16 questions of which 10 of them formed part A and were compulsory and contributed 28 marks. These
Traditional Grinding & Polishing
Traditional Grinding & Polishing Grinding Wheels 3.2 Discs 3.4 Polishing & Buffing Powders 3.5 Felt Buffers 3.7 SECTION 3 Grinding Wheels RADIAC / NATIONAL SILICON CARBIDE WHEELS A high quality, made in
Fall REGISTER FOR CERAMIC CLASSES Open Enrollment Starts October 8th! Classes fill quickly due to our small class sizes. Fall Business Hours
Fall 2018 Fall Business Hours Monday - Friday 8AM - 5PM Saturday 8AM - 12PM CLOSED: November 22nd through November 25th Thanksgiving REGISTER FOR CERAMIC CLASSES Open Enrollment Starts October 8th! Classes
End Covers for coolers
APPLICATION REPORT End Covers for coolers Application: Place: Corrosion protection of end covers for coolers SUIM Workshop, Gran Canaria Date: October 2010 Job and report done by: Wencon products used:
SOLDERING & BRAZING SOLDERING & BRAZING
SOLDERING & BRAZING SOLDERING & BRAZING Soldering Cleaning pads 198 Electric soldering pliers 198 Electric soldering unit 199 Turbo soldering torches 200 Solder wire and solder paste 201 REMS Cu-Vlies
NOTICE INVITING QUOTATIONS. Description : Equipment for Engineering Workshop in Mechanical Engg. Department. NIQ No : RGUKT-B/Proc/ME/EWS/Q03/2019
RAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES Basar, Nirmal District Constituted under the Act 18 of 2008 Ref: RGUKT-B/Proc/ME/EWS/Q03/2019, dated.07.02.2019 NOTICE INVITING QUOTATIONS Description
Machinery & Engineering Equipment
Wheeler & Clinch, Sale 1, Tool Room Machinery & Engineering Equipment (Ends: 2018-07-18 14:00:00.0) Wheeler & Clinch, Plastic Injection Moulding Facility And Tool Room. Available Due To Closure. Lot 1
Rev. 05/16 01 ACRYLIC INSTALLATION GUIDE
Rev. 05/16 01 ACRYLIC INSTALLATION GUIDE Contents 1.0 Inspection 3 2.0 Storage 3 3.0 Handling 3 4.0 Planning & Preparation 3 5.0 Panels 4 6.0 Accessories 4 7.0 Tools & Fixings 4 8.0 Fitting Tips 5 9.0
DESIGN AND TECHNOLOGY
DESIGN AND TECHNOLOGY Paper 6043/01 Paper 1 General Comments The general performance of candidates was much the same as last year, however, section A was a little below the normal good standard for this
HEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with