API/IP Coalescer Elements

Size: px

Start display at page:

Download "API/IP Coalescer Elements"

Christine Washington
6 years ago
Views:

P-Type Coalescer Elements For the Separation of Water and Solids from Aviation Fuels according API/IP th Edition Filter water separators are fitted with coalescer and separator elements and used on

1 P-Type Coalescer Elements For the Separation of Water and Solids from Aviation Fuels according API/IP th Edition Filter water separators are fitted with coalescer and separator elements and used on aircraft refuelling vehicles, hydrant dispensers and other mobile fuelling equipment. They are also used in fixed fuelling installations and tank farms. FAUDI Aviation coalescers are commonly used in other branches of industry such as refineries, petrochemical plants and marine applications where high efficiency filtration and separation is required. Technical Details Tested and approved to spec. API/IP, th Edition Category C, Type S Nominal Filtration: μm Change out differential pressure:. bar ( psi) Burst pressure:. bar ( psi) Recommended Service time: months Recommended Storage time: months & OperatingTemperature: min. -0 C / max. 0 C Flow direction: In to out Outside diameter: mm (6 ) Standard Design Inner tube in epoxy coated steel Seals in NBR (Buna-N) Endcaps made out of Polyamid/reinforced glass fibre abeling according to API/IP (date of manufacturer, ID-Number etc.) on the endcap ess than ppm of free water in the effluent Manufacturer recommendation Original packaging, 0 C and max. 0% humidity. After date of shipment out of FAUDI Aviation stock. API/IP Coalescer Elements Coalescer wrap Pleated paper filtration section Support tube Cotton outer sock D-60 Stadtallendorf Phone: Fax: DB-P-Coalescer_. Page / Rev..

D-Type Coalescer Elements For the Separation of Water and Solids from Aviation Fuels according Mil-F-90 E Filter water separators are fitted with coalescer and separator elements and used on aircraft

2 D-Type Coalescer Elements For the Separation of Water and Solids from Aviation Fuels according Mil-F-90 E Filter water separators are fitted with coalescer and separator elements and used on aircraft refuelling vehicles, hydrant dispensers and other mobile fuelling equipment. They are also used in fixed fuelling installations and tank farms. FAUDI Aviation coalescers are commonly used in other branches of industry such as refineries, petrochemical plants and marine applications where high efficiency filtration and separation is required. Applications Meets the requirements of Military Specifications Mil-F-90 E and Specification T0-000 (Part + ) (Federal Republic of Germany) and AM + M B (Italy) Technical Details Nominal Filtration: μm Change out differential pressure:, bar ( psi) Burst pressure:. bar ( psi) Recommended Service time: months Recommended Storage time: months & Operating temperature: min. -0 C / max. 0 C Flow direction: In to out Outside diameter: mm (6 ) Standard Design Outer tube in carbon steel black epoxy coated Inner tube in epoxy coated steel Seals in NBR (Buna-N) Endcaps made out of carbon steel epoxy coated abeling according to API/IP (date of manufacturer, ID-Number etc.) on the endcap ess than ppm of free water in the effluent Manufacturer recommendation Original packaging, 0 C and max. 0% humidity. After date of shipment out of FAUDI Aviation stock. D-Type Coalescer Elements Coalescer wrap Pleated paper filtration section Support tube Cotton outer sock D-60 Stadtallendorf Phone: Fax: DB-D-Coalescer_.0 Page / Rev..0

3 D-Type Coalescer Elements Example of marking: D. - Model type Endcap design END CAP DESIGN OPEN END O-ring nominal ength (including sealing) nominal ength mm Model mm Model 6 6 Ø0 ( ) Model / D.-6 / D.- Torques Conversion table ft/lbs /lb s 6 D.6-6 kg/ m Ø0 Ø0 Model 6 Nm 0 000, ,00 0 Nominal length in mm D-Type Coalescer Elements open end Model Torques Nm (for rod) Nm D-60 Stadtallendorf Phone: Fax: DB-D-Coalescer_.0 Page / Rev..0

Y-Type Coalescer Elements For the Separation of Water and Solids from Aviation Fuels according to API/IP th Edition, Category M, Type S Filter/Water separators are fitted with coalescer and separator

4 Y-Type Coalescer Elements For the Separation of Water and Solids from Aviation Fuels according to API/IP th Edition, Category M, Type S Filter/Water separators are fitted with coalescer and separator elements and used on aircraft refuelling vehicles, hydrant dispensers and other mobile fuelling equipment. They are also used in fixed fuelling installations and tank farms. FAUDI Aviation Coalescers are commonly used in other branches of industry such as refineries, petrochemical plants and marine applications where high efficiency filtration and separation is required. Applications Meets the requirements of API/IP th Edition, Category M, Type S and Specification T0-000 Edition, Part (Federal Republic of Germany) Technical Details Nominal Filtration: μm Change out differential pressure:, bar ( psi) Burst pressure:, bar ( psi) Recommended Service time: months Recommended Storage time: months & Operating temperature: min. -0 C / max. 0 C Flow direction: In to out Outside diameter: mm (6 ) Standard Design Inner tube in epoxy coated steel Seals in NBR (Buna-N) Endcaps made out of carbon steel epoxy coated abeling of encaps acc. to API/IP (date of manufacturer, ID-Number etc.) ess than ppm of free water in the effluent Y-Type Coalescer Elements Manufacturer recommendation Original packaging, 0 C and max. 0% humidity after date of shipment out of FAUDI Aviation stock Coalescer wrap Pleated paper filtration section Support tube Cotton outer sock D-60 Stadtallendorf Phone: Fax: DS-Y-Coalescer_EN_. Page / Rev..

5 Y-Type Coalescer Elements Example of marking: Y. -/ Ø0 ( ) Model Model type Endcap design OPEN END (Model & ) / O-ring (Model 6) SCREW/THREAD BASE nominal ength (including sealing) OPEN END OPEN END O-ring mm / Model Model Model 6 / 6 / / / / 6 / / / / / 6 Ø9 ( / ) Model Y.-6/ END CAP DESIGN Y.6-6/ Y.-9/ Y.-/ Y.-/ Torques Conversion table ft/lbs 0 zoll/lb s kg/ m Nm 00,0 0,0 00,0 Ø0 Ø0 Model 6 API/IP th Edition Nominal length in mm ½ - UNC 0* ( ) Ø0 ( 9/6 ) (* width across flats) Y-Type Coalescer Elements Nm (for rod) Torques Nm Open End Model & screw/thread based Nm Nm D-60 Stadtallendorf Phone: Fax: DS-Y-Coalescer_EN_. Page / Rev..

6 P-Type Coalescer Elements Example of marking: P. -09 Ø0 ( ) Model OPEN END nominal ength (including sealing) mm Model Model Model Model type Endcap design Ø6 ( 9/6 ) Model Model END CAP DESIGN / P.-9 /.-6 / P.-6 / P /.- / P.- P.-.- / P /.-09 /.- Ø9 ( / ) SCREW/THREAD BASE nominal ength mm P Nominal length in mm ½ - UNC 0* ( ) Ø0 ( 9/6 ) (* width across flats) /6 P.-6 P 6 / P.-9 P 0 / P.- P / P.- P 96 P.-96 P / P.-09 P / 6 P.- API/IP Coalescer Elements open end Model, & screw/thread based Torques Nm (for rod) Nm Nm Nm Torques Conversion table ft/lbs 0 /lb s kg/ m Nm 0 000, , ,00 0 D-60 Stadtallendorf Phone: Fax: DB-P-Coalescer_. Page / Rev..

Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator

Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator ANSI version Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam