Ring Type Joint CALVOSEALING DESCRIPTION
|
|
- Hilary Hubbard
- 5 years ago
- Views:
Transcription
1 CALVOSEALING Ring Type Joint DESCRIPTION Ring Type Joints are metal ring to be used with elevated pressure and temperature applications. The sealing contact area results very reliability. Sealing gasket contact surface, as well as flange surface, have to be machined and finished. Ring Type Joint materials should not be forced or laminated, and should not have irregularities. Sealing hardness must be 30 HB less than flanges, ensuring enough gasket deformation without damaging flange s face. Used primarly in the petroleum fields, drilling equipment and terminating equipment. Also commonly used in valve assemblies and pipes, such as vessels under high pressures. Ring Type Joint available shapes: ICP SM71 Oval section gasket. ICP SM72 Octagonal section gasket, characterized for offering better sealing. ICP SM73 Joint with a specially shaped designed for use the internal pressure as auxiliary mode for sealing. ICP SM74 Square section gasket with bevelled edges, offering an excellent sealing. 1
2 Ring Type Joint RING TYPE JOINT TYPES CALVOSEALING Ring Type Joints are available in the following formats: ICP SM71 ICP SM71 oval section Ring Type Joint is designed for flanges with ring type grooves. This type of seal is used to seal pressures up to 345 bar (5,000 psi) manufactured according to API6A. ICP SM72 ICP SM72 octogonal section Ring Type Joint is designed for flanges with ring type grooves. This type of seal is used to seal pressures up to 345 bar (5,000 psi) manufactured according to API6A. ICP SM73 ICP SM73 Ring Type Joint is the most resistant ring to vibrations, peaks of pressure and shock that are produced during the drilling of wells for oil. ICP SM74 ICP SM74 Ring Type Joint is designed for pressures up to 1,380 bar (20,000 psi) manufactured according to API6A. The ring type joint has a square cross section with bevelled edges. 2
3 Ring Type Joint STANDARD MATERIALS MATERIAL BRINELL HARDNESS TMPERATURE LIMIT Min. Max. IDENTIFICATION Soft Iron D Low Carbon Steel S 4%-6% Cromo ½ % Molibdeno F5 Stainless Steel S304 Stainless Steel S316 Stainless Steel S321 Stainless Steel S347 Stainless Steel S410 Inconel Incoloy Hastelloy C C-276 Titanium TI APPLICATIONS RTJ PROFILE APPLICATIONS Resistant to high temperature and pressure. Suitable for flat face and male & female flanges. Designed to seal pressures up to 430 bar / 6,250 psi (ASME B16.5) and 345 bar / 5,000 psi (API 6A). High sealing capacity at high pressures. Suitable for flat face and male & female flanges. Designed to seal pressures up to 430 bar / 6,250 psi (ASME B16.5) and 345 bar / 5,000 psi (API 6A). Designed to seal high pressures where provides an efficient sealing with internal pressure increases. Suitable for male & female flanges. Designed to seal pressures up to 430 bar / 6,250 psi (ASME B16.5) and 345 bar / 5,000 psi (API 6A). Designed to seal high pressures where provides an efficient sealing with internal pressure increases. Designed to seal pressures up to 1,380 bar / 20,000 psi (API 6A). 3
4 Dimensions: RTJ Gasket RTJ Gasket Dimension to ASME B16.20 (ICP SM71/SM72) ( used with ASME B16.5, API 6B and ASME B16.47 series A ) 5 RTJ Gasket Dimension to ASME B16.20 (ICP SM73) ( used with ASME B16.5, API 6B and ASME B16.47 series A ) 7 RTJ Gasket Dimension to ASME B16.20 (ICP SM74) ( used preassure classes, API 6BX ) 8 4
5 RING TYPE JOINT DIMENSION TO ASME B16.20 & API Std 6 A (ICP SM71/SM72) ( used with ASME B16.5, API 6B and ASME B16.47 A flanges ) NOMINAL DIAMETER (inch) / NOMINAL PRESSURE (Lb) TOLERAN- CES ± 0.18 ± 0.20 ± 0.50 ± 0.50 ± 0.20 WEIGHT (Kg) ICP SM71 ICP SM72 Average Pitch Diameter of Ring P (mm) Width of RIng A (mm) Height of Ring Oval B (mm) Height of Ring Octagonal H (mm) Width of flat on octagoanl Ring C (mm) Radius in Octogonal Ring R 1 (mm) OVAL OCTOGONAL ½ R ½ ½ R ¾ ½ R ¾ ¾ R R ¾ R ¼ R ¼ 1 ¼ 1 ¼ 1 1 ¼ 1 ¼ 1 ¼ R ½ R ½ 1 ½ 1 ½ 1 ½ 1 ½ 1 ½ R ¼ R R ½ 2 R R ½ R , ½ 2 2 ½ R ½ 2 ½ 2 ½ 2 ½ R ½ R R R R R ½ R ½ R R R ½ R R R R R R R R R R R R R R R R R R R R R R R R R R
6 NOMINAL DIAMETER (inch) / NOMINAL PRESSURE (Lb) TOLERANCES ± 0.18 ± 0.20 ± 0.50 ± 0.50 ± 0.20 WEIGHT (Kg) ICP SM71 ICP SM72 Average Pitch Diameter of Ring P (mm) Width of RIng A (mm) Height of Ring Oval B (mm) Height of Ring Octagonal H (mm) Width of flat on octagoanl Ring C (mm) Radius in Octagonal Ring R 1 (mm) OVAL OCTAGONAL 14 R R R R R R R R R R R R R R R R R R R R ½ R R ½ R R R ½ R R R R R R R R R R R R R R R R R NOTES flanges to API 6B are obsolete. R30 is suitable for lapped flanges only. The 23º surface on both grooves and octogonal ring shall have a surface finish not roughter thna 63 RMS. TOLERANCES A (Widht) ± 0.20 B, H (Height) ± 0.51 MATERIALS Gasket material should be selected to suit the service conditions, it is recommended that the gasket is softer than the flanges. RTJ are made in soft iron and low carbon steel and can be zinc plated 0,005 to 0,0127 mm thickness. P (Average pitch diameter) ± º (Angle) ± 1/2º 6
7 RING TYPE JOINT DIMENSION TO ASME B16.20 & API Std 6 B (ICP SM73) ( used with ASME B16.5, API 6B and ASME B16.47 A flanges ) NOMINAL DIAMETER (inch) / NOMINAL PRESSURE (Lb) TOLERANCES ± 0.50 ± 0.20 ± 0.15 ± 0.76 ± 0.20 ± 0.5 Outside ( o ) ICP SM73 Diameter A (mm) C (mm) D (mm) H (mm) R 1 (mm) OD (mm) WEIGTH (Kg) 1 ½ 1 ½ 1 ½ Rx Rx Rx ⅛ Rx ½ Rx ½ 2 ½ Rx Rx Rx Rx Rx Rx Rx Rx Rx * Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx ½ Rx Rx ½ Rx Rx Rx ½ Rx Rx Rx * 8* Rx ⅜ Rx /16 Rx /16 Rx /16 Rx TOLERANCES NOTES All 23º surfaces shall have a surfaces finish not roughter than 32 RMS. A (Widht) ± 0.20 H (Height) ± 0.20 (*) Available for cross flanges conection. ( o ) 2900 flanges to API 6B are obsolete. OD (Outer Diameter) ± º (Angle) ±1/2º 7
8 RING TYPE JOINT DIMENSION TO ASME B16.20 & API Std 6 BX (ICP SM74) ( used with API 6BX ) NOMINAL DIAMETER (inch) / NOMINAL PRESSURE (Lb) TOLERANCES ± 0.15 ± 0.20 ± 0.20 ± 0.15 ± 0.05 ± 0.5 Nominal ICP SM74 OD (mm) H (mm) A (mm) C (mm) T (mm) D (mm) Size WEIGHT (Kg) 1 11/ / / / / /16 2 1/16 2 1/ /16 2 9/16 2 9/ /16 3 1/16 3 1/ /16 4 1/16 4 1/ /16 7 1/16 7 1/ ⅝ 13 ⅝ 13 ⅝ ⅝ ¾ ¾ 16 ¾ 16 ¾ ¾ ¾ 18 ¾ ¼ ¼ ¾ ¾ ⅛ ⅝ 6 ⅝ /16 8 9/ / / NOTES All 23º surfaces shall have a surfaces not rougher than 32 RMS max. El radio R shall be 8 to 12 % of the gaskets height H. R hole shall be in the middle of dimension C. TOLERANCES A (Widht) H (Height) ± 0.20 OD (Outer Diameter) ± º (Angle) ±1/4º 8
9 c/ Galileo 8 - P.I. Can Estella St. Esteve Sesrovires Barcelona, España Tel Fax E: info@calvosealing.com REVIEW 09/27/2012
R21
style r Dimensions in mm approx. pressure class ratings pitch width height of ring distance gasket weights, lbs. ring ansi, BS & mss api (psi) diameter Between of ring no. 150 300/600 900 1500 2500 2000/3000
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More informationFlange Dimensions Class 125 Bronze Flange Dimensions Class 300 Bronze Flange Dimensions Class 150 Bronze Flange Dimensions
Dimensions Class Bronze Dimensions Meets Ib. A.S.M.E. Stard Class 00 Bronze Dimensions Meets ANSI STD B. Nominal Dim. A O.D. Dim. B Circle Dim. C Hole No. Holes Nominal Dim. A Diam. Dim. B Min. Dim. C
More informationCATALOG FOR PRESSURE CONTROL EQUIPMENT. Supplement 3 API CONNECTOR ACCESSORIES. Ring Gaskets, Flange Bolts and Nuts, Hammer Wrenches TRADEMARK WOODCO
CATALOG FOR PRESSURE CONTROL EQUIPMENT Supplement 3 API CONNECTOR ACCESSORIES Gaskets, Flange Bolts and Nuts, Hammer Wrenches This catalog supplement provides information to allow selection and accurate
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationCompressors, Chillers & Condensers
MARINE CONDENSER ACME MHX MARINE CONDENSER ACME Type MHX condensers are manufactured with the latest technology marine condenser tubing to provide compact size and cost effective use. STANDARD DESIGNS
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationThreaded Products Gaskets & Seals Precision Machining
Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
More informationTHERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED
age 1 of 5 THERMOWELLS CONSTRUCTION FROM BARSTOCK OR FABRICATED A thermowell is a thermally conductive socket recommended to: rotect the delicate instrument sensing elements against corrosive effects.
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationAF-4 Grooved Flange Adapter
SUBMITTAL INFORMATION PROJECT NAME: ENGINEER: CONTRACTOR: SPEC. SECTION: MEMBER FEATURES & ADVANTAGES Designed for connecting ANSI/AWWA C110/A21.10 and ASME/ANSI B16.1 Class 125/ flanged end components
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More informationISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK 01 SME SME SME
1. Summary The still pipe used with Rosemount 5900 LPG/LNG antenna is not supplied by RTR, but is to be manufactured by the customer according to the RTR drawing D9240041-910 or D7000001-466. Additional
More informationGOST TUBING AND COUPLINGS
GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.
More informationFluid Sealing Association
Fluid Sealing Association STANDARD FSA-MG-501-02 STANDARD TEST METHOD FOR INWARD BUCKLING OF SPIRAL-WOUND GASKETS 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania 19087-1866 Phone: (610) 971-4850
More information0.20. Record Page 1 of 19
Page 1 of 19 Page 2 of 19 Page 3 of 19 Page 4 of 19 Page 5 of 19 ASME BPVC.III.1.ND-2015 Page 6 of 19 ð15þ Figure ND-3325-1 Some Acceptable Types of Unstayed Flat Heads and Covers GENERAL NOTE: The illustrations
More informationNote: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More information20 LEAD FACE MILL SERIES DM6G, DM5G
20 LEAD FACE MILL SERIES DM6G, DM5G Diameters Cutting Edge Length Insert Corner 1.500" to 8.000".230".030"R Facing Lead Angle Coolant Thru K H 70º.23 D3 D 1 D 2 D 3 Coolant Thru Effective Cutter Number
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationINSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS
PIEDMONT PACIFIC CORPORATION INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS 4703 Tidewater Ave., Suite G Oakland. CA, 94601, USA Ph: +1 510 434 0990 / Fax: +1 510 436 0990 www.piedmontpacific.com
More informationSection COUPLINGS AND COUPLING ADAPTERS. This Section covers couplings and coupling adapters for ductile iron and steel pipe.
PART 1 GENERAL 1.01 SUMMARY Section 15155 This Section covers couplings and coupling adapters for ductile iron and steel pipe. 1.02 MEASUREMENT AND PAYMENT A. No separate payment for Work performed under
More informationANDERSON GREENWOOD SAFETY SELECTOR VALVE
A dual pressure relief device system that provides a safe, efficient method of switching from an active PRV to a standby, maintaining system overpressure protection FEATURES GENERAL APPLICATION Safety
More information11-1/4 OD at Transition Point. Microcosmic. 4th and Brannan Street Platform Station Project. Elevation. Moto Ohtake 2014
74 480 330 90 72 180 150 60 90 18 11- OD at Transition Point 36 184 74 Microcosmic Elevation 14 1 Moto Ohtake I. GENERAL NOTES: A. SCULPTURE DESIGN CRITERIA 1. CALIFORNIA BUILDING CODE (CBC, 2010 EDITION)
More informationValve repair and testing technique
High standard in precision. Valve repair and testing technique Quality Made in Germany by GmbH & Co. KG Grinding and Lapping Machines for Industrial Valves VENTA Portable grinding and lapping machines
More informationPIONEER TRADING CO., LTD.
PRECISION KURODA LTD. OIL COUNTRY GAUGES API THREAD GAUGES PREMIUM CONNECTION GAUGES THREAD MEASURING INSTRUMENTS CONTACT TO: PIONEER TRADING CO., LTD. 4-1 Kuzuha-Asahi 3-Chome Hirakata Osaka 573-1111,
More informationCalculations per ABS Code along with ASME Sec. VIII Div.1 XXXX
Calculations per ABS Code along with ASME Sec. VIII Div.1 XXXX Grouping of Boilers and Pressure Vessels: PART 4 CHAPTER 4 SECTOIN 1 Table #2 and #3 >> Group II PART 4 CHAPTER 4 SECTOIN 1 Appendix 1 Rules
More informationTel : +31 (0) Fax: +31 (0)
Maverick Valves BV Jan van Galenstrt 17 3115 JG Schiedam The Netherlands Tel : +31 (0)10 303 2620 Fax: +31 (0)10 303 2670 info@maverickvalves.com www.maverickvalves.com THIS DOCUMENT AND THE INFORMATION
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationREPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
More informationInsertion Transducer On-line Install Instruction
LOGO Insertion Transducer On-line Install Instruction Shanghai Dynameters Co., Ltd www.dynameters.com Insertion Transducer Installation Manual Installation steps 1. Locate Installing point 2. Weld mounting
More informationWATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
More informationMISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION
5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE
More informationAssmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS
Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS General Information Assmann polyethylene storage tanks are manufactured to give you the toughest, most reliable
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3501 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Instrument Air Design Conditions 150 PSIG @ 180 F Operating Conditions 125
More informationDOLPHIN SHELL & TUBE MARINE CONDENSERS (DSTMC)
PIOEER I HEAT TRASFER TECHOLOGY DOLPHI SHELL & TUBE MARIE CODESERS (DSTMC) Dolphin Shell & Tube Marine Condenser (DSTMC) General Information Dolphin carries out Thermal Design, Mechanical Design & detailed
More informationSockets. Dimensions; Mechanical & Performance Requirements. Socket Head Cap Screws Body & Grip Lengths - Socket Cap Screws...
imensions; Mechanical & Performance Requirements Socket Head Cap Screws... 2-4 Body & Grip Lengths - Socket Cap Screws... 5-6 Low Head Socket Cap Screws... 7 Button Head Socket Cap Screws... 8 Flat Head
More informationPIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
More informationSECTION MANHOLES
SECTION 02601 MANHOLES PART 1 GENERAL 1.01 SCOPE OF WORK A. WORK required under this section consists of all materials, accessories, equipment, tools, and labor required to install precast concrete standard
More informationWATERFLUX 3000 Quick Start
WATERFLUX 3000 Quick Start Electromagnetic flowmeter The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS WATERFLUX 3000
More informationPRODUCT CATALOGUE. Major Features: Arc Bends Manufactured to: Pipestar now offering full-line of flanged Arcbends
PRODUCT CATALOGUE Pipestar now offering full-line of flanged Arcbends Pipestar offers a range of seamless long radius Arc HDPE sweep bends made to the highest quality standards. Pipestar offers a range
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationAllentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015
Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)
More informationFASTENERS FIRST LOOSEN WITHOUT TURNING!
FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first
More informationPROSTHETICS CATALOGUE Connective Componentry
PROSTHETICS CATALOGUE Connective Componentry Prosthetic and orthotic solutions for an active and independent lifestyle CONTENTS Section 1 ADAPTERS 3 Section 2 PYLONS AND KITS 12 Section 3 SPECIALTY ADAPTERS
More informationHAND TOOLS. Moore & Wright Engineers Squares. For more information visit Features. WORKSHOP SQUARES: Grade B DIMENSIONS TABLE (MM)
Moore & Wright Engineers Squares Precision ground blade and stock Blind rivetted construction Hardened and tempered blades 3" & 4" available in Retail Packs 4006 WORKSHOP SQUARES: Grade B Blade Length
More informationIX. FLARED JOINTS IX. FLARED JOINTS
IX. FLARED JOINTS IX. FLARED JOINTS While copper tube is usually joined by soldering or brazing, there are times when a mechanical joint may be required or preferred. Flared fittings (Figures 28 and 29)
More information( This link will provide you with a list of all ISO-6983 G-Codes
CUSTOM HAZARDS CUSTOM HAZARDS CUSTOM HAZARDS In this lesson I am going to explain how to circle interpolate a 1/8-27 NPT with a formed thread E-Mill using G-Code on a vertical mill. I have provided the
More informationANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
More information3 Emergency Breakaway Coupling
SM64227 July 2008 Applicable addition manuals: N/A Aerospace Group Conveyance Systems Division Carter Ground Fueling Maintenance & Repair Manual 3 Emergency Breakaway Coupling Model 64227 Table of Contents
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationSteel Plate in Oil Rig Blowout Preventer Valves
Design Problem Steel Plate in Oil Rig Blowout Preventer Valves Introduction Design for Performance Alloy selection Radii and stress reduction Design for Production Mould method Orientation and cores Controlling
More informationTool School - Rotary Draw Bending Tooling. An Engineer s Guide to Bending Tubes
Tool School - Rotary Draw Bending Tooling An Engineer s Guide to Bending Tubes Tube Form Solutions Tool School Rotary Draw Bending Tooling Tool School Agenda: Introduction To Rotary Draw Bending Engineering
More informationPage 1 of 12 Second Revision No. 5-NFPA 12-2014 [ Section No. 2.3.4 ] 2.3.4 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C 700, West Conshohocken, PA 19428-2959. ASTM A53, Standard
More informationHigh Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
More informationKEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM
S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation Information
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More informationSM-10. Features. Variable Area Flowmeter with Sight Glass for Small Flow Volumes. Description: Application: / Indication without power supply
SM-10 Variable Area Flowmeter with Sight Glass for Small Flow Volumes Description: Features / Indication without power supply The SM-10 series of flowmeters operates according to the proven variable area
More informationHBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationFIELD LOK 350. Gasket 4" 24" JOINT RESTRAINT NSF FOR WATER & WASTEWATER, FIRE PROTECTION & INDUSTRIAL APPLICATIONS. Certified to ANSI/NSF 61
4" 24" FIELD LOK 350 JOINT RESTRAINT Gasket FOR WATER & WASTEWATER, FIRE ROTECTION & INDUSTRIAL ALICATIONS 4" 24" FIELD LOK 350 Gasket 2 Table of Contents FIELD LOK 350 Gasket 3 Assembly 4 Alternative
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More informationTYPE 3740 WET RUNNING CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring Adapter Assy. C Sealing Element Gasket D Sealing Element Strip E Sealing Element O-ring F Set Screw G Primary Ring H Retaining Ring I Spring Adapter Assy. Set J O-ring (Split)
More informationIndex. Installation and Tools. Installation and Tools... Page
Super SM Index... Page Connector Mounting Hole Chart.... 82 for Flange Mount.... 84 Mounting Hole Patterns and Seal Solder Tools... 85 for Thread-in.... 86 () for Thread-in.. 87 0.9 mm (SST) for Thread-in...
More informationTRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationWeld Screws, Weld Nuts, Clinch Studs
Weld Screws, Weld Nuts, Clinch Studs imensions; Mechanical & Performance Requirements Weld Screws Top Projection Style... 2 ottom Projection Style... 3 Weld Nuts Single Projection... 4 Multiple Projection...
More informationTHE IMPORTANCE OF THE FITTING
JOHNSON RISER PIPES Geometrical characteristics (diameter, depth), pump pressure and water quality are the principal factors determining the choice of the riser pipe and the fitting type. These choices
More informationTechnical Specifications Guide For Fasteners
fastrite_2011_fut.ai 8/4/11 4:29:01 PM Technical Specifications Guide For Fasteners C M Y CM MY CY CMY K Important Disclaimer All of the information provided in this publication is intended for reference
More informationSERRATING / GROOVING TOOL - ST SERIES. Features : 1/8 x3/8 x1/8
3 1 8 2-2 SERRATING / GROOVING TOOL - ST SERIES FOR GROOVING IN TUBE SHEETS Tool 1/8 x 3/8 x 1/8 Spacing Spare Tool Bits 1/8 x 1/4 x 1/8 Spacing Special Spacing 9.53 3/8 ST-375-970 ST-3703 ST-3703-S ST-3703-SPEC
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationTaps. Taps - Technical Info. Torque Cut High Performance HSSE Ring Colored Taps Technical Information. - Technical Information
Torque Cut High Performance HSSE Ring Colored Taps Technical Information RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and
More informationAPPLICATION RANGE FEED STROKE FREE SPEED TORQUE mm 25 mm 100 Rpm 140 Nm. 300,0 mm. Body height: 13, mm 25 mm 100 Rpm 2,0 4,0 1,0
PanelMill F-35 The PanelMill attaches to the tube outside diameter by means of custom or specific clamp type jaws that provide strong clamping action that minimizes chatter and vibration. This rugged construction
More informationUS SERIES ID MOUNT MACHINING EQUIPMENT. Ø 8 mm mm Ø INDUSTRIES : ID MOUNT MACHINING SM8 S18 US25 US30CH US40 US80 US150 US450
US SERIES ID MOUNT MACHINING EQUIPMENT Ø 8 mm - 914 mm Ø 0.315 36 ID MOUNT MACHINING US Series SM8 S18 US25 US30CH US40 US80 US150 US450 10 Machining Capacity 8-32 mm 14-42 mm 12.5-120 mm 32-168.3 mm 43-219
More informationDigital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
More informationLENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
More information1. Enumerate the most commonly used engineering materials and state some important properties and their engineering applications.
Code No: R05310305 Set No. 1 III B.Tech I Semester Regular Examinations, November 2008 DESIGN OF MACHINE MEMBERS-I ( Common to Mechanical Engineering and Production Engineering) Time: 3 hours Max Marks:
More informationFabrication and testing of a centrifugal pump
Fabrication and testing of a centrifugal pump DISCLAIMER The content of this presentation is for informational purposes only and is intended only for students attending Portland State University. The author
More informationEN 1092 PN 10 EN 1092 PN 16 JIS B K ANSI B16.5 Class 150 ANSI B16.47 Class 150 BS 10 Table D
HG EN 1092 PN 10 EN 1092 PN 16 JIS 2238 10K ANSI 16.5 Class 150 ANSI 16.47 Class 150 S 10 Table D Stafsjö s knife gate valve HG is a bi-directional valve, particularly well suited for severe operating
More informationSpecifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish
Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length
More informationflexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
More informationPrecision Double Row Cylindrical Roller Bearings With Tapered Bore
Roller Bearings With Tapered Bore High precision cylindrical roller bearings are bearings with a low cross section, high load carrying capacity and speed capability. These properties make them particularly
More informationCARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
More informationand AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems
and AM-CAT-COREV(GB)-11/08 High Performance Indexable Insert Systems Allied Maxcut Engineering Co. Limited AMEC Indexable Drill Range The AMEC range of adjustable indexable carbide drills provides the
More informationFigure 11 Flange Adapter and Back-Up Ring
Flange Adapters Standard back-up rings are Standard back-up rings are convoluted ductile iron with AWWA C207 150 lb drilling. One edge of the back-up ring bore must be radiused or chamfered. This edge
More informationPipe Product Catalog Table of Contents
Pipe Product Catalog Table of Contents Section A: Drawing #: Page Description A1 Reinforced Concrete Pipe A3 Storm Manhole Sizing Chart (48" - 96") A3.1 Storm Manhole Sizing Chart (108" - 144") A4 48"
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationTHREAD PROTECTORS & END CAPS
Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, U.K. DD11 3RD Tel: +44 (0) 1241 877776. Fax: +44 (0) 1241 871037 E-mail: sales@pioneeroiltools.com Website: www.pioneeroiltools.com
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationHydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
More informationThe Redi-Flange Method. How It Works. Services. Engineering & Costing Assistance
... g n ldi ng... e i W No hread ing! T oov o N Gr o N The Redi-Flange Method Redi-Flange is a method of joining valves, fi ttings and equipment with integral fl anged ends to plain-ended pipe, with all
More informationIntroduction INTRODUCTION
2 INTRODUCTION Introduction Discover the Next Generation in Edge Welded Metal Bellows BellowsTech is a premier US manufacturer of high quality, dependable edge welded bellows and assemblies. Engineers
More informationMETAL FABRICATION SECTION 8: METAL FABRICATION SCOPE MATERIAL.
METAL FABRICATION SCOPE This specification applies to all metal intended to be rubber lined. Metals furnished must conform to this specification with respect to suitability for rubber lining or covering.
More informationSELF-TAPPING SCREW FIXINGS
Denomination: Reference: FT ROS-en Date: 15/12/15 Revision: 3 Page: 1 of 14 T81 AUE T82 TCP T83 TFI CHARACTERISTICS ISO 1478 self-tapping thread. Require pre-drilling. Point Type F. Wide variety of head
More informationUS80 ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE TUBE AND PIPE BEVELING MACHINE
TUBE AND PIPE BEVELING MACHINE ID CLAMPING PORTABLE TUBE AND PIPE BEVELING MACHINE PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax: 905-727-8483 info@practicaltoolsinc.com
More informationWKE45 SUPER COBALT HSS TOOL BITS
RECTANGULAR L Net B A Overall Price Size Each x" ". x/.7 x 9. x.9 x 0. x. x.7 x 0. x.7 x 7. /x7/.9 /x.97 /x.00 /x 9.79 /x 9. x. x. x.9 x.0 x 7.7 x.7 x. x.7 x. x 0.7 x 0. x. x.9 x 7 0. x 7.9 x 7 9. x 00.
More information