Special Requirements Specially for Energy Systems Singapore/Singapore PR students with 2nd Class Upper Honours.

Transcription

1 ST Kinetics Position: Engineer Job Description (a) Perform design & implementation of hardware & software system projects that define the architecture, co (b) Conduct user requirement, application development, system integration, deployment as well as troublesho (c) Conduct testing to evaluate the attribute or capability of the hardware/software & determine that it meets (d) Work closely and manage multiple vendors to ensure that goals for schedule, budget and quality are establ (e) Assist in adhoc projects when required. (f) Participate in R&D proposal write-up and technical presentations Technical Knowledge/Skills/Competencies (a) >3 years working experience in embedded systems development, OSP based or micro-controller hardware (b) Practical hands on knowledge in C/C++, Labview programming is essential (c) Proficient in electronics cicuit design(both analog and digital), power electronics, schematics and PCB layou (d) Good analytical and troubleshooting skills (e) Good knowledge in clean energy systems will be an added advantage People Skills Able to work well in a team and multi-task effectively with tight timelines. Specially for Energy Systems Singapore/Singapore PR students with 2nd Class Upper Honours. Mr Benjamin Ho DID: Fax: hobenjamin@stengg.com

2 KLA-Tencor (Singapore) Pte Ltd 1) Associate Test Engineers (Optics) Responsibilities: Perform hands-on assembly, set-up, calibration, testing, troubleshooting, and diagnosing diverse technical problems that occur during optics-related (lenses, lasers, etc) manufacturing and installation of KLA-Tencor products. Coordinate or perform rework on optics sub-assemblies and/or systems as a result of testing. Assists in the selection and set-up of specialized test equipment and test processes. Assists in improving design and/or manufacturing processes. Participates in design and continuous improvement teams that drive improvements on manufacturing operations such as design for cost, design for assembly & test, design for manufacturing, and overall productivity. Bachelor s degree or Diploma in Engineering is required. Applications with direct optical academic, background and work experience highly preferred. Fresh grads are welcome to apply Ability to read technical drawings/procedures and use a variety of precision testing and measuring instruments. Previous hands-on experience with semiconductor equipment, especially with precision motion control, optical-mechanical alignment, and system-level diagnosis. Strong troubleshooting and analytical skills preferred 2) Manufacturing Engineer (Optics) Responsibilities Requirements Manage optical alignment equipment and related alignment methodology for the latest generation of optical wafer inspection tools Identify ways to improve yield and predictability of the optical integration process Participate in the integration and troubleshooting of the manufacturing issues of the optical systems and subsystems Work with suppliers to resolve component/part quality problems in a timely manner. Assist Quality and Purchasing departments in driving supplier quality improvements and cost reductions Master's/Bachelor's Degree in Physics, Optics or Mechanical Engineering with 5 or more years experience in opto-mechanical integration Hands-on experience in assembly, alignment, calibration, system integration, and testing of opto-mechanical subsystems, Good working knowledge of optical testing equipment such as interferometers, autocollimators, alignment telescopes, spectrometers, etc Experience in developing manufacturing procedures and leading a team in assembling, aligning, calibrating and testing optical systems Excellent project management, problem solving and interpersonal skills A self-driven individual with keen technical mind, positive attitude and strong team player 3) Manufacturing Design Engineer (Optical System) Responsibilities: Experience in product development through release and will be expected to champion his/her technical solutions Provide feedback on design changes by working closely with Development Engineering teams (M.E., E.E., and S/W Eng.) and creating ECO and documentation as needed Take lead role on many projects to define, scope, and provide input that results in rapid project completion or problem resolution Develop product specifications using the appropriate statistical methods and modeling. Solve complex system interaction issues (e.g., optical and mechanical interactions on tool performance) with little or no guidance. Support beta tool build at development sites. MS or Ph.D. Degree in Physics, Applied Physics, Optical, or Electrical Engineering with 8 or more years in optical instrumentation design and characterization. Ability to demonstrate strong leadership skills (technical/non-technical), analytical problem-solving, function independently and be a motivated team member working within a team of multidisciplinary engineers. Good combination of practical hands-on skills and system level thinking Have worked on complex optical instrumentations and optical assemblies with a proven track record of success Experience in semiconductor or capital equipment, project management, UV photo-contamination and opto-mechanical design is a plus. Hands-on experience on laser-based optical systems and experience of using optics simulation tools (ZEMAX, Code V or other tools) Strong written and verbal communications skills Specially for Photonics Optics Graduates Ms Tricia Teo Tricia.Teo@kla-tencor.com

3 Research Engineer in Building Energy System Applicants are invited for a Research Engineer position to participate in a Building Energy Efficiency project. Systematic characterizing studies will be carried out to investigate the performance of a desiccant/nano-woven membrane air dehumidification system. Applicants should possess a Bachelors or Masters degree in the area of Engineering or Science, with a good background in Energy System. Prior experience with transport phenomena related to cooling systems will be an added advantage. Ability to work independently, good team-working and communication skills are essential. The appointment is available immediately for up to 24 months with the potential to extend for another 12 months. The applicant should be able to commit for at least one year. It is also possible for the candidate to pursue a Master/PhD study based on this work with a scholarship support after the contract. Kindly note that the applying candidate has to be a Singapore citizens and/or Singapore Permanent Residents of ASEAN origin. Interested applicants should forward a full CV and a covering letter stating suitabiltiy for the post. Pls include contact information of 3 references. Send it to: Dr Chua Kian Jon Ernest mpeckje@nus.edu.sg Salary will commensurate with experience and Honors class. Only shortlisted applicants will be notified.

4 Jobs in Institute of Microelectronics Applicants should possess a Bachelors or Masters degree and is familiar with Finite Element software such as ABAQUS or ANSYS for solid mechanics analyses (stress/strain etc.), preferably have some experience with shock, impact analysis and/or modeling of electronics packaging. Ms. Siow Ling Ho hosl@ime.a-star.edu.sg

5 Research Engineers on 3 year NUS/FoE Research Projects Position 1: Radial Mirror Energy Electron Spectrometers The candidate is to be a Research Engineer on a 3 year MOE Tier 2 Research project that will start on 1 st August The project involves making and testing various electron energy spectrometer designs which have been designed and filed for patent by Assoc. Prof. Khursheed (H. Q. Hoang and A. Khursheed, Nucl. Instrum. and Meth. in Physics Research A 635 (2011) 64-68, and A. Khursheed et al, J. of Electron Spectroscopy and Related Phenomena 184 (2012) ). The project is mainly experimental in nature, and involves working with electron beam columns, vacuum chambers, and electron detectors such as channeltrons. The position is suitable for either applied physics or electrical engineering graduates who have an interest in electron microscopes/electron spectrometers. The candidate will be required to take an interest and learn the basic principles of electron optics and electron spectrometers, and learn how to use electron optics/field solving simulation programs. It is possible to combine the research engineer position with doing a part-time PHD. Position 2: Magnet Field simulation for MRI The candidate is to be a Research Engineer on a 3 year AcRF Tier 1 FRC Level/NUS Research Grant which will start in August to December The project involves running 3D magnetic field simulation programs for Magnetic Resonance Imaging applications. The project will be conducted in collaboration with the company, EchoMRI, who have recently setup in Singapore. The project involves magnetic field mathematical modeling/numerical simulation techniques, and is suitable for physics, electrical engineering or applied mathematics graduates. New magnet layouts to achieve quantitative MRI will be explored. The candidate must have a strong mathematical background. It is possible to combine the research engineer position with doing a part-time PHD. Interviews to be conducted in the months of May/June. A/P Anjam Khursheed eleka@nus.edu.sg