INSTITUTIONAL DOOR CLOSER
|
|
|
- Ashlynn McGee
- 6 years ago
- Views:
Transcription
1 FASTENERS ARM TYPE DESCRIPTION PA LOW PROFILE PR CLP/ CPS UNI SLIDE TRACK DOOR SDST Self Drilling Self Tapping S S S S S N/A MS Machine Screw S S S S S S SN Sleeve Nut/Sex Nut N/A N/A S S S S TORX Torx Drive Security Screw O O O O O O FRAME SDST Self Drilling Self Tapping S S S S S S MS Machine Screw S S S S S S SMS Sheet Metal Screws O O O O O O TORX Torx Drive Security Screw O O O O O O S = standard; O = optional SN are for use on unreinforced hollow metal doors or to prevent any hollow metal door from collapse/dimpling. They can also be used for thru bolting on wood doors. SN are supplied for 1-3/4" (44mm) thick doors unless specified for 2-1/4" (57mm) thick doors. SMS when specified, closer will be packed with sheet metal screws for the door AND sheet metal screws plus machine screws for the frame. TORX screws with security pin are standard with 7570 Security Door Closers. Torx may be specified for all other series applications. Torx are only available with machine screw threads. Sheet metal screw threads are not available.
2 FINISHES ANSI/BHMA US DESCRIPTION 600* SRI Prime Coat 605 US3 Bright Brass 606 US4 Satin Brass 611 US9 Bright Bronze 612 US10 Satin Bronze 613E US10BE Dark Oxidized Satin Bronze - Equivalent 625 US26 Bright Chrome 626 US26D Satin Chrome 689 AL Aluminum 690 STAT Statuary Bronze 691 DB Dull Bronze Black 696 GB Gold RITE Door offers waterborne acrylic, polyster powder coat and plated finishes. Custom finishes are available on special order. A sample and approval is required. Waterborne acrylic and polyester powder coat will withstand 100 hours of salt spray (ANSI requires 25 hours). RITE Door closer bodies and plastic covers are available in waterborne acrylic finishes. Arms and metal covers are available in powder coat or plated finishes. When a plated finish is ordered, arm and cover will be plated unless "cover only" is specified. * 600 is a special rust-inhibiting prime coat. Closers can be ordered prime coat only (specify closer x 600). An additional charge applies if finish coat is required over prime coat.
3 REGULAR ARM 1-3/4" * 44mm 3-1/2" 89mm 4-1/8" 105mm * This dimension will vary. Standard non-hold open arm illustrated. INTERIOR EXTERIOR NON-HOLD OPEN HOLD OPEN NON-HOLD OPEN HOLD OPEN 32" (81) 30" (76) H 38" (97) 34" (86) H 48" (122) 42" (107) H 54" (137) 48" (122) H Unusual Conditions H H
4 PARALLEL ARM 5/8" 16mm Ref R 6-1/2" * 165mm 1-3/4" 44mm (54) Mounting holes for closer body are spaced 2-3/8" (86mm) vertically x 6-3/4" (171mm) horizontally. * This dimension will vary. Standard non-hold open arm illustrated. INTERIOR EXTERIOR NON-HOLD OPEN HOLD OPEN NON-HOLD OPEN HOLD OPEN 30" (76) P7702 P7702H 36" (91) 30" (76) P7703 P7703H 42" (107) 36" (91) P7704 P7704H H 48" (122) 42" (107) P7705 P7705H 54" (137) 48" (122) P7706 P7706H R (INCHES/MM) MINIMUM TOP RAIL OF DOOR WITH 5/8" (16MM) FRAME STOP WITH 7788 DROP WITHOUT DROP PLATE PLATE P7500 P7500H P7580 P7500H P /8" (149) 6-1/4" (159) 5-3/8" (137) 2-3/4" (70) 1-7/8" (48)
5 PARALLEL RIGID ARM 5/8" Ref 16mm 5-7/8" 149mm 6-1/2" * 165mm 1-3/4" 44mm INTERIOR EXTERIOR NON-HOLD OPEN HOLD OPEN * NON-HOLD OPEN HOLD OPEN 30" (76mm) PR7702 PR7702H 36" (91mm) 32" (81mm) PR7703 PR7703H 42" (107mm) 36" (91mm) PR7704 PR7704H PR7500 PR7500H 48" (122mm) 42" (107mm) PR7705 PR7705H 48" (122mm) PR7706 PR7706H *Specify hand when ordering
6 CLOSERPLUS ARM 5/8" Ref 16mm 5-7/8" 149mm 6-1/2" * 165mm 1-3/4" 44mm *Specify hand when ordering INTERIOR EXTERIOR NON-HOLD OPEN NON-HOLD OPEN 30" (76mm) CLP " (91mm) 32" (81mm) CLP " (107mm) 36" (91mm) CLP7704 CLP " (122mm) 42" (107mm) CLP " (122mm) CLP7706
7 CLOSERPLUS SPRING ARM 5/8" Ref 16mm 5-7/8" 149mm 6-1/2" * 165mm 1-3/4" 44mm INTERIOR EXTERIOR NON-HOLD OPEN NON-HOLD OPEN 30" (76) CPS " (91) 32" (81) CPS " (107) 36" (91) CPS7704 CPS " (122) 42" (107) CPS " (122) CPS7706
8 PULL SIDE SLIDE TRACK 3-1/2" 89mm 23" 584mm 1-1/2" 38mm 1-1/2" 38mm 2" 51mm R 4-1/8" 105mm NON-HOLD OPEN HOLD OPEN NON-HOLD OPEN HOLD OPEN INTERIOR EXTERIOR " (81) 7704ST 7704ST STH 38" (91) 32" (81) 7705ST 7705ST STH 7500ST 7500ST STH 48" (122) 38" (97) 7706ST 7706ST STH 1 Units can also be mounted with the closer body on the jamb. Prefix the model number with a J. Where the frame face is less than 3-3/8" (86mm) a number 7786JP backplate will be required. 2 Units can also be installed on double egress doors using a handed arm that will accommodate the frame profile. Suffix the model number with DE. For reveal ranges 1/4" to 3" (6 to 76mm). R (INCHES/MM) MINIMUM TOP RAIL OF DOOR WITH FRAME STOP WITHOUT DROP PLATE WITH 7786 DROP PLATE 3-1/2" (149) 2-5/8" (70)
9 PARALLEL UNITROL ARM 5/8" 16mm Ref 5-3/4" 146mm 6-3/8" 162mm W Mounting holes for closer body are spaced 2-3/8" (60mm) vertically x 6-3/4" (171mm) horizontally. Door width must be specified when ordering. Use 6190 bracket for reveals 1-7/8" - 4-5/8" (48 to 117mm). Reveals in excess of 4-5/8" (117mm) require use of a 6191 reinforcing kit. Reveals to 1/8 (3mm) require use of a 2019L angle bracket. DOOR WIDTH INCHES/CM W ARM EXTENSION BEYOND CLOSER 28-32" (71-81) 8-5/8" (219) 33-41" (84-104) 10-1/8" (257) 42-48" ( ) 11-1/2" (292) INTERIOR EXTERIOR NON-HOLD OPEN HOLD OPEN NON-HOLD OPEN HOLD OPEN 30" (76) UNI7702 UNI7702H 36" (91) 30" (76) UNI7703 UNI7703H 42" (107) 34" (86) UNI7704 UNI7704H UNI7500 UNI7500H 48" (122) 42" (107) UNI7705 UNI7705H 48" (122) UNI7706 UNI7706H x Specify Door Width
10 PUSH SIDE SLIDE TRACK 5" 57mm 23" 584mm 1-1/2" 38mm 1-1/2" 38mm R 6-1/2" 165mm INTERIOR EXTERIOR NON-HOLD OPEN HOLD OPEN " (81) PS7704ST PS7704STH 38" (91) 32" (81) PS7705ST PS7705STH 48" (122) 38" (97) PS7706ST PS7706STH NON-HOLD OPEN ST HOLD OPEN STH R (INCHES/MM) MINIMUM TOP RAIL OF DOOR WITH FRAME STOP WITHOUT DROP PLATE WITH 7786 DROP PLATE 6" (152) 2-5/8" (67)
11 LOW PROFILE PULL SIDE SLIDE TRACK 2-1/4" 57mm 25" 635mm 1" 25mm R 21/32" 17mm 1-1/8" 29mm 4-5/8" 117mm INTERIOR NON-HOLD OPEN HOLD OPEN NON-HOLD OPEN HOLD OPEN 32" (81) 7744ST 7744STH 38" (91) 7745ST 7745STH 7540ST 7540STH 48" (122) 7746ST 7746STH R (INCHES/MM) MINIMUM TOP RAIL OF DOOR WITH FRAME STOP WITHOUT DROP PLATE WITH 7786 DROP PLATE 3-1/2" (89) 2" (51)
12 LOW PROFILE PUSH SIDE SLIDE TRACK 4-5/16" 110mm 25" 635mm 1" 25mm 21/32" 17mm R 5-7/8" 149mm INTERIOR NON-HOLD OPEN HOLD OPEN NON-HOLD OPEN HOLD OPEN 32" (81) PS7744ST PS7744STH 38" (91) PS7745ST PS7745STH PS7540ST PS7540STH 48" (122) PS7746ST PS7746STH R (INCHES/MM) MINIMUM TOP RAIL OF DOOR WITH FRAME STOP WITHOUT DROP PLATE WITH 7788 DROP PLATE 5-1/4" (133) 3-5/8" (92)
13 POCKET DOOR 7706STP Ref. Top of Wall Pocket 3/4" 19mm 5-1/2" 140mm 3-5/8" 92mm 6-3/8" 162mm IMPORTANT Wall Reinforcement (by others) Must Be Sufficient to Withstand Door Action Slide Track 7706STP OR 7706ED-STP CLOSERS Slide Track for 90 Wall Pocket Installation For Pocket Depths 2-1/4" to 4-1/4" (57mm to 108mm) (See Chart for Closer Sizing) 2-1/4" 57mm to Door 4-1/4" 108mm Ref. Top of Wall Pocket 23" 584mm Pocket Depth 3/4" 19mm CLOSER SIZING CHART (CM) MAXIMUM DOOR WIDTH CLOSER 42" (107) 7706STP 48" (122) 7706EP-STP 5-1/2" 140mm 4-1/4" 108mm MAX. IMPORTANT Wall Reinforcement (by others) Must Be Sufficient to Withstand Door Action 3-5/8" 92mm 6-3/8" 162mm 2-1/4" 57mm MIN. IF POCKET See chart (above) for closer sizing. NOTE: Contact factory if door weight exceeds 250 lbs.
800 SERIES. Heavy-Duty Commercial Grade 1 Surface Applied Closers. Standard Features. 3 hours fire rated. openings of the door.
800 SERIES Heavy-Duty Commercial Grade 1 Surface Applied Closers Standard Features n Performance Complies with ANSI A156.4, Grade 1, 2 million cycles, UL/ULC listed up to 3 hours fire rated n Chassis/Closer
Door Closers. General Information
General Information Hager Companies offers a variety of surface door closers to meet a wide range of applications and uses. Heavy Duty, Grade 1 door closers are ideal for schools, hospitals, and other
s tops & holder s Absolute Door Control and Entire Opening Protection
check mate s tops & holder s Absolute Door Control and Entire Opening Protection Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole or
Checkmate Stops & Holders. Absolute Door Control and Entire Opening Protection
Checkmate Stops & Holders Absolute Door Control and Entire Opening Protection checkmate stops & holders TABLE OF CONTENTS General Information...3 How to Select Product...4 Options...5 Certifications...5
INSTRUCTIONS FOR 1431 Door Closer with Hold Open Arms 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
INSTRUCTIONS FOR Door Closer with Hold Open Arms SERIES ADJUSTABLE FROM SIZE THRU 6 FOR INSTALLATION ASSISTANCE CALL SARGENT AT -800-77-77 / www.sargentlock.com Installation Instructions based on Application
Installation Instructions
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6
1431 DOOR CLOSER WITH STANDARD DUTY ARMS (WITHOUT HOLD OPEN) INSTALLATION INSTRUCTIONS 1431 SERIES ADJUSTABLE FROM SIZE 1 THRU 6 FOR INSTALLATION ASSISTANCE, CALL SARGENT AT 1-800-727-5477 www.sargentlock.com
ASSA ABLOY Series Installation Instructions. Regular Arm. Parallel Arm. Top Jamb Mount. Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models
9500 Series Installation Instructions Multi-Sized 1 thru 6 Non-Hold Open and Hold Open Models Regular Pages 5 & 6 Parallel Pages 7 & 8 Top Jamb Mount Pages 9 & 10 IMPORTANT: An improperly installed or
Overhead Concealed Closers
Overhead Concealed Closers Introduction Rixson Overhead Concealed closers offer an aesthetically appealing way to close a door. In situations where a closer is needed but concealment is required, Rixson
3000 Series Exit Devices Premier Product
00 000 Series Exit Devices Premier Product Certification & Compliance: ANSI/BHMA A56., Grade ANSI A7. Accessibility Code Underwriters Laboratories (UL and CUL) listed for accident hazard (panic) standard.
Installation Type. Edge of Door. Pull (Hinge) Side Mounted. Hinge Edge of Door. Push (Stop) Side Mounted
Installation Instructions CAUTION An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These instructions should be followed to avoid the possibility
These door closers should NOT be installed on the exposed side (weather side) of exterior doors. WOOD 3/16" 1/4"- 20
Hollow-metal doors require channel or box-type reinforcement when thru-bolt mount is specified. Hold open arms are not permitted on fire doors. Sex-bolts may be required for wood or plastic faced fire
Pivots / Padlocks / Hasps
/ Padlocks / Hasps 046-6270 046-770 Master Lock 6270 Solid Steel Shackleless Round Padlock and 770 Security Hasp Padlock 2-7/8 round body Available cylinders: W6000 5-pin, W7000 6-pin, AM W600A 5-pin,
Regular Arm Installation. Closer mounts on hinge side of door (pull side) See Page 3. Closer cover not shown. Top Jamb Installation
UNIVERSAL HARDWARE CLOSER UH61 & UH62 STALLATION STRUCTIONS The Professional s Choice MULTI SIZE 1 THRU 6 NON HOLD OPEN CLOSER CAUTION! An incorrectly installed or improperly adjusted door closer can cause
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUO (JO & JP9) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE Auxiliary
Door Controls. Table of Contents
Door Controls Hager Companies offers a comprehensive line of door control products designed and manufactured to meet a wide range of applications and uses. From humble beginnings in 1849 as a forger of
Fine Builders and Home Hardware
Fine Builders and Home Hardware Since 1876, IVES has been manufacturing fine builders and home hardware with a tradition of product quality and customer service that has established them as an industry
400 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Overhead Holders. Closer-Holder Packages
Checkmate and Stops General Information Overhead stops are used to protect door assemblies.they cut down the wear and tear of frequency, closing mechanisms, wind gusts, abuse and vandalism. By limiting
1800 Series. Flatbar Exit Devices. An ASSA ABLOY Group brand
, BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 1800 Series Flatbar Exit Devices An ASSA ABLOY Group brand , BC V3L 3B1, BC V3A 8A7, BC V3B 7W3, BC V6G 2M6 introduction Yale 1800 series exit devices are
Installation Instructions. Installation Type
Installation Instructions 800 & 8050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
316R Series Installation Instructions
316R Series Installation Instructions Multi size 1 thru 6 Non hold open closers CAUTION An incorrectly installed or improperly adjusted closer can cause property damage or personal injury. These instructions
Installation Instructions. Installation Type
Installation Instructions 300 & 3050 Slide Track Door Closers Non Hold Open & Hold Open Models Note: Hold open models are not permitted to be installed in Listed fire door assemblies. PULL SIDE MOUNTED
Trim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
DOOR STOPS & BUMPERS See page 321 for finish descriptions.
CR-DH25 US3, 26D 4" Zinc Diecast Drop Down Door Holder CR-SBDH5 US3, 10, 10B 5" Solid Brass Kick Down Door Holder. Base 7/8" x 1-3/4" (Ives #455) CR-GS118* US3, 4, 10, 10B, 15A Door Stop 2-1/8" high *w/hanger
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS
SARGENT 1331 DOOR CLOSER INSTALLATION INSTRUCTIONS WITH JUH (HOLD OPEN) ARMS Strength Adjustable From Size 1 Thru 6 CAUTION: FAILURE TO INSTALL OR ADJUST PROPERLY MAY RESULT IN INJURY OR DAMAGE. FOR ASSISTANCE,
Architectural Door & Cabinet Hardware
Architectural Door & Cabinet Hardware TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
Architectural Door & Cabinet Door
Architectural Door & Cabinet Door A1 TYDIX Flush Pulls TYDIX Flush Pulls are ground and polished to furnish a square, flat dress face usually free of blemishes. All outside edges and corners are clean
7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions
7110(F), 7170(F)(LBR) Surface Vertical Rod Exit Device Series Installation Instructions Shim (2) Supplied Strike Plate 791 Strike (3) 10-24 x 3/4 (19mm) PFHMS Strike Angle Must Engage Strike 12-24 FHPMS
INSTALLATION INSTRUCTIONS CRL JACKSON
INSTALLATION INSTRUCTIONS CRL JACKSON 1285 CONCEALED VERTICAL ROD PANIC EXIT DEVICE crlaurence.com Phone: (800) 421-6144 Fax: (866) 921-0531 crlaurence.com usalum.com crl-arch.com 11M0248 ORDER OF ASSEMBLY
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2018, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 Features and Details.... 3 590
DC3210. Recommended Closer Size
Installation Instructions For Non-Hold Open or A Hold Open Arm Option DC3200 Series Multi-Sized thru 6 Regular Arm Universal Door Closers Parallel Arm Jamb Mount See pages 2&3 See pages 4&5 See pages 6&7
7100(F) series. A conventional exit device for single swing doors or pairs of doors of metal, wood or composite construction.
Page Revised Electronically 12/12 7000 series architectural exit devices introduction Yale 7000 series exit devices deliver an unparalleled combination of durability, breadth of line, innovation and aesthetics.
THRESHOLDS. Finishing Touch for Floor Closer Installations
THRESHOLDS Finishing Touch for Floor Closer Installations Copyright 2001-2018, ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole
930 Series Mortice Exit Device
930 Series Mortice Exit Device BS EN 1125:1997+A1:2001 Classification Code 37601322B The Adams Rite 930 Series Mortice Exit Device is a life safety device which is designed to fit timber or hollow steel
McKINNEY Hinge Catalog Hinge Types
Hinge Types McKINNEY offers the broadest range of full mortise hinges in a variety of metals, finishes, sizes, and weights to meet all your load bearing and security applications. They include two, three,
TS93 STH. Surface applied door closer. Installation instructions: Pull side door mounted spring track Inverted closer with hold open (STH)
Surface applied door closer Installation instructions: Pull side door mounted spring track Inverted closer with hold open (STH) TABLE OF CONTENTS Closer overall Technical specifications Door template Size
Table of Contents Holders & Stops
Copyright 2003, 2007, 2009-2012, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved. Table of Contents Overview.... 1 General Information.... 2 How to Select Product... 3 Options,
INSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) Endcap P/N:
103104 January 20, 2009 INSTALLATION INSTRUCTIONS FOR ARCHITECTURAL VALUE SERIES ELECTRIC DOGGING / ELECTRIC LATCH RETRACTION AND "H" MODELS (HURRICANE) ED Electric Dogging ER ELECTRIC LATCH RETRACTION
Checkmate Stops & Holders
Checkmate Stops & Holders TABLE OF CONTENTS introduction Sit moluptatur, ut quae dolorro et eatia quam, tecesed igendam, autemolor sunt. Ucil isi doloreium fugia doluptae ipsunt evellab orehenti debissi
Hardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
An ASSA ABLOY Group brand Series. Flatbar Exit Devices
An ASSA ABLOY Group brand 1800 Series Flatbar Exit Devices Page revised electronically 7/16 1800 series grade 1 exit devices introduction Yale 1800 series exit devices are the ideal choice for economy
ED8000 Series. Pushpad Exit Devices Parts Manual
ED8000 Series Pushpad Exit Devices Parts Manual Table of Contents ED8200A Rim Exit Device...4 ED8200(B) Rim Exit Device...6 ED8400A Surface Vertical Rod Exit Device...8 ED8400 Surface Vertical Rod Exit
Installation/Care/Use Manual Soft Sides Freeze Resistant Fountain
Installation/Care/Use Manual Soft Sides Freeze Resistant Fountain EDFP217FPC Installer To assure you install this model easily and correctly, PLEASE READ THESE SIMPLE INSTRUCTIONS BEFORE STARTING THE INSTALLATION.
Shim (2) Supplied. Strike Plate. (3) x 5/8" PFHMS or 10 x 1" PFHWS. Top Latch. (3) x 1/4" PRHMS. Latch Cover. (2) 8 x 3/8" PFH AB SMS
Installation Instructions ED5400 (A) Series ED5470 (B) Series Surface Vertical Rod Exit Devices Strike Angle Must Engage Strike Top Strike 10-24 PFHMS Top Bracket and Strike required for ED5470. Shim (2)
baldwin 5" High, Solid Brass Solid Brass
Tel (45) 552-5500 www.macpac.com DOOR KNOCKERS BALDWIN door knockers BALDWIN HOUSE NUMBERS 5" High, baldwin COLONIAL 6.5" x 3.5" C/C of bolts: 4" Available w/observ-o-scope* 002-003 Lifetime Pol. Brass
2100 series exit devices. rugged reliability
rugged reliability Yale 2100 introduction It s no secret that the 2100 series flatbar exit device has a reputation as the right choice for meeting the rigors of demanding industry segments. The quality
FINISH GROUPS #17 GRP #17 CLEAR
EFFECTIVE FEBRUARY 1, 2018 CONTENTS A3/1 CONTENTS SECTION A3...DOOR CLOSERS PAGE SURFACE MOUNTED CLOSERS... A3/2 A3/3 CALIBRE TM CLOSERS... A3/4 INTERNATIONAL CONCEALED CLOSERS... A3/5 CONCEALED CLOSER
Specialty Closers. High-End Residential High-End Security Gate Solutions
Specialty Closers High-End Residential High-End Security Gate Solutions TABLE OF CONTENTS General Information... 3 How to Select Product... 4 Options... 5 Certifications... 6 Limited Warranty... 6 Specifications...
Knock Down Patio Door Assembly Instructions Regular & Impact
Knock Down Patio Door Assembly Instructions Regular & Impact 72 x 80 72 x 82 72 x 96 96 x 80 96 x 82 96 x 96 Impress the Weather KD Patio Door Regular & Impact Sizes 72 x 80 72 x 82 72 x 96 96 x 80 96
20 Series Exit Devices Accessories Mullions & Door Kits
20 Series Exit Devices Accessories s & Kits 980 Removable Bottom (2438mm) stock size Up to (3000mm) size 2-1/2" 1-1/2" 1-1/4" 3" 507 Adapter for Narrow Transom Bars Required when soffit is 1-1/4" to 2"
PUSH BAR EXIT DEVICES CROSS BAR EXIT DEVICES NARROW STILE EXIT DEVICES FEATURING LCWD STRIKES... 20
Flat Goods Section TABLE OF CONTENTS EXIT DEVICES PUSH BAR EXIT DEVICES N1500 Heavy Duty Rim Exit Device N1550 Rim Exit Device... 6 N1650 Fire Rated Heavy Duty Exit Device N1700(F) Vertical Rod Heavy Duty
6200 Series. System Components Series Electric Strikes
6200 Series Strikes for Mortise or Cylindrical Devices Models 6210, 6211, 6211AL, 6211WF, 6212, 6212WF, 6213, 6214, 6215, 6216, 6221, 6222, 6223, 6224, 6224AL, 6225 & 6226 System Components 6200 Series
Open Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
Solid Core Wood Door / Steel Frame Packages
Solid Core Wood Door / Steel Frame Packages No Label - Interior Packages Machined for one (1) cylindrical lock and three (3) hinges at Republic locations 1-3/4 Solid Core Birch 1-3/4 Solid Core Oak 3/0
Create cable assemblies to fit your style
2015 Feeney (11/15) Quick-Connect Brochure #2015-975B Create cable assemblies to fit your style Quick-Connect Solutions Guide The fast and easy way to create your own CableRail assemblies! Our CableRail
Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20
Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal
Mortise Locks. European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications
2 Mortise Locks 2 c 3 4 6 9 22 24 European Mortise Locks Series EML Features Ordering String Functions Trim Sets European Profile Cylinders Specifications 2016 02 2 FSB North America European Mortise Lock
WNA Series. Knobsets AVAILABLE STYLES AVAILABLE FINISHES. Finish A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA Code
WNA Series Knobsets AVAILABLE STYLES Beverly Huntington Phoenix Troy AVAILABLE FINISHES Are in Brilliance finish in certain funtions Finish 3 5 15 17A 26 26D 34 3W BEVERLY HUNTINGTON PHOENIX TROY BHMA
55 Series. Exit device
55 Series Exit device Introduction The proper selection and application of exit hardware, in addition to safety, are major concerns to all responsible manufacturers. Exit devices are a critical part of
LIST PRICING. Standard Door Modifications
Standard Modifications 6/8 Slab Only (No Jamb) *deduct from standard door unit price - $120 7/0 and 8/0 Slab Only (No Jamb) *deduct from standard door unit price -$160 Sidelite Panel Only (No Jamb) *deduct
ED5800 (A) Series. Installation Instructions. Concealed Vertical Rod. Exit Device WARNING
Strike Shim (2) Supplied Strike Plate (3) 10-24 x 3/4" PFHMS (6) 10-24 x 1/2" PFHMS Top Latch TopTube Concealed Vertical Rod Exit Device Important: For use with metal doors only. Device is packed ready
Vertical Offset Base and Safety Rail System Installation Instructions
Section 5 Vertical Offset Base and Safety Rail System Installation Instructions The vertical offset base and safety rail assembly are designed to be used in residential construction for sloped or flat
DOOR SAVERS AVAILABLE IN STEEL, STAINLESS STEEL (32D), BRIGHT BRASS (3), BRONZE (10) AND OIL RUBBED BRONZE (10B)
SAVERS K1 : 9 High For cylindrical locksets 2-1/8 bore, 2-3/8 and 2-3/4 backsets K 188 2-3/8 1-3/8 K 184 2-3/8 1-3/4 K 148 2-3/4 1-3/8 K 144 2-3/4 1-3/4 K5 144 5 SPECIFY K3 : 9 High For cylindrical locksets
McKINNEY Builder s Hardware Catalog #4
McKINNEY Builder s Hardware Catalog #4 McKINNEY is comprised of a world class team of highly skilled people focused on exceeding customer needs through innovation and flexibility in the manufacture of
Stainless Steel Continuous Hinges
TABLE OF CONTENTS A ANSI Standards...2 C Cancellation Notification... 2 Concealed Electric Through-Wire... 4-5 Custom Hole Pattern... 2 Custom Length Hinges... 2 D Dutch Door Hinges... 3 E Electrical Modifications
MEETS ADA REQUIREMENTS!
PUSH / PULL LATCH HL-6 MEETS ADA REQUIREMENTS! HL-6/EO EXIT ONLY LATCH HL-6/EO Exit Only Latch for applications where only one side of door is used for exit or entry. Ideal for situations where the security
MAXIMA TRADITIONAL JUST ASK FOR THE WOOD GATE HARDWARE QUICK & EASY TO INSTALL AVOID TYPICAL INSTALLATION PROBLEMS END USER SATISFACTION
ORNAMENTAL GATE HARDWARE JUST ASK FOR THE MAXIMA TRADITIONAL QUICK & EASY TO INSTALL Patent No. 4,871,203 No. 4,690,440 j j j j j PRE-ASSEMBLED You do not have to put it together EASIEST INSTALLATION Two
Mounting Instructions Item No.: xxx
Mounting Instructions Item No.: 271.92.xxx Wall-Beds 1 General Notes For vertical folding beds Successful and safe installation of Bed-Lift and construction of casework requires a professional skill level
INSTALLATION INSTRUCTIONS FOR PLASCORE NARROW STILE DOORS
INSTALLATION INSTRUCTIONS FOR PLASCORE NARROW STILE DOORS The following information is provided by Plascore, Inc., as a general guideline for the installation of the Plascore Narrow Stile Door and Jamb
ED3000 Series. Exit Device Parts Manual
ED3000 Series Exit Device Parts Manual Table of Contents Functions...3 ED3200 Series Rim Exit Device...4 ED3200A Series Rim Exit Device - Fire Rated...5 ED3400 Series Surface Vertical Rod Exit Device...-7
PRL GLASS PANIC HANDLES DOOR MANUAL PL100 PANIC HANDLE PL100-A SERIES. For all glass doors
DOOR MANUAL PL100 PANIC HANDLE SERIES For all glass doors Content of this manual: DOOR FABRICATION ( panic handle installation ) - page 3 Parts list, tools & supplies required Installation of handle to
ESA-300 Full Breakout
Interior View 0 Installation Instructions For use with ESA II Controler DORMA AUTOMATICS, Inc. 94 Sherwood Drive Toll-Free: 877-67-6 DL844-00 Lake Bluff, IL 60044 Fax: 877-4-7999 Rev. /07 Tools Required:
300 Series Pin & Barrel Type Continuous Stainless Steel Hinges
www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door
INSTALLING YOUR NEW SPRING LIFT ARM KIT
INSTALLING YOUR NEW SPRING LIFT ARM KIT 1. Measure the distance that the roof is to be raised. [If your lift system is completely non-functional, you will need to calculate or estimate this distance as
Floor Stops - Dome. FS13 Dome Stop. FS17 Dome Stop. R14 Riser. Features:
Floor Stops - Dome FS13 Dome Stop Standard FS13 for use where no threshold is used. Heavy-Duty Cast Dome Stops constructed of brass. Unique riser design of R14 (below) allows easy conversion to threshold
Pivot and Pivot Sets. Architectural Solutions for Durable and Efficient Hanging of Doors
Pivot and Pivot Sets Architectural Solutions for Durable and Efficient Hanging of Doors TABLE OF CONTENTS General Information... 4 How to Select Product... 5 Options... 6 Certifications... 6 Limited Warranty...
WindowAndDoorParts.US
Knob/Push Pull Latch Sets Tulip Knob Latch, Single Hole 17-52 Aluminum Installs in single hole bore 1-1/4" diameter. Tulip Knob Latch 17-59 17-60 Aluminum Tulip Knob Latch "No Lock Out" Feature 17-61 Aluminum
6200 Series. Strikes for mortise or cylindrical devices. Features and benefits. Overview. Non handed design provides greater flexibility
6200 Series Strikes for mortise or cylindrical devices Overview Features and benefits Von Duprin electric strikes are known for their reliability, durability and security. The 6200 Series is designed to
ICU TRACK SLIDING DOOR
Interior View 0 Installation Instructions Tools Required: Screwdrivers Small Straight (Flat Blade) - for Terminal Block wiring # Phillips (Crosspoint) - for various #8, #0, and # screws Wrenches / Sockets
ATLANTIS RAIL Contact Information
ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
HINGES SPECIFICATIONS. Hinge Chart - General Specifications
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
Allen & Allen Company
Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No. 7000 carriers, two
5200 Series Door Closer Installation Instructions
5200 Series Door Closer I-C00187 R2 Regular Arm See Page 2 An incorrectly installed or improperly adjusted door closer can cause property damage or personal injury. These installation instructions should
INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3
Izerwaren Order numbers 25.191. Cabinet Rim lock, Push Button type, - 25 mm backset Page 2-3 Cabinet Rim lock, backset 25 mm - 1 Minimum door thickness 19 mm ~3/4 Strike plate not included with lock Both
1530(F) Mortise Exit Devices Installation Instructions
1530(F) Mortise Exit Devices Installation Instructions Singe Doors or Pairs (2) 12-12-24 PFHUM/WS 798 Universal Strike Standard Device Package Devices are packed ready for application reinforced metal
INSTALLATION INSTRUCTIONS. Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING
JANUARY, 2014 1 INSTALLATION Thermal Entrances AA 250/AA 425 THERMAL DOOR WITH TRIFAB 601/601T FRAMING INSTRUCTIONS 2 FRAME ASSEMBLY JANUARY, 2014 601442 SHEAR BLOCK BALL BEARING NRP BUTT (FACTORY APPLIED
New Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
Testing and CE Marking
Briton Series - Panic and emergency exit hardware Briton Series - Panic exit hardware Testing and CE Marking In distinct contrast to the modular nature of the Briton 560-0 Series, the long established
B Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
392CV SERIES Stickstall
202 Anderson Ave., Belvue, KS 66407 Phone: 800-669-9867 Fax: 800-393-6699 www.onyxcollection.com 800-643-1514 www.alumaxshowerdoor.com 392CV SERIES Stickstall TM Corner Shower Enclosure 392CV-1117 Yes!
Commercial Hinges TABLE OF CONTENTS
TABLE OF CONTENTS A Architectural Finish Symbols...3-4 B Back Plate... 12 E ECCO... 75-77 Emergency Stop Release... 14 F Fasteners...9-10 D Detention Food Pass Through Hinge... 31 Detention Hinge (IHT)...
western window systems westernwindowsystems.com installation instructions non-pocket 2-1/4 panels
series 2600 multi-slide non-pocket 2-1/4 panels windowsystems.com windowsystems.com movement, which can cause warping and other problems. Frame kit components: Each door will have a head assembly, a threshold
SLIDING DOOR SYSTEM_ S42 PRODUCT LIST. System description Accessories
SLIDING DOOR SYSTEM_ S42 PRODUCT LIST System description Accessories 1 SLIDING DOOR SYSTEM_ S42 1.0_ System description_ page 03 2.0_ Profiles_ page 04 3.0_ System description S1600 fixed panels_ page
1.8. Panic Exit Devices. ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts. Mechanics
1.8 Panic Exit Devices ED22 Series, ED2227 Series, ED22M Series, Accessories and Parts Mechanics OCTOBER 2014 Panic Exit Devices Kaba Panic Exit Devices provide a fast and convenient means of escape in
Masonry Frames Interior/Exterior* Drywall Frames Interior**
Masonry Frames Interior/Exterior* Step your frame: Wire Masonry Anchor Combo Stud Anchor Existing Opening Anchor Hollow Metal 5-3/4" Standard* Frame Includes: 6 gauge - cold rolled steel - primed galvanneal
3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6
2 DOOR ARRANGEMENT. A Lay door on a clean floor inside of building and in front of opening (see Figure 1). NOTE: Door can be damaged if laid on unclean surface. B Distribute parts bags, guides, stops and
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device
ED5200S(A) Series ED5200S(A) Series x M107 Windstorm Series SecureBolt Exit Device Installation Instructions FM532 3/11 (Single Doors or Pairs with Mullion) For Doors of Either Hand In U.S.: Corbin Russwin,