Allen & Allen Company

Size: px

Start display at page:

Download "Allen & Allen Company"

Marion Alyson Hill
6 years ago
Views:

Sliding Door Hardware 71-222 Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in 71-222 Hardware Set: 7001 Track, two No.

Basic Track: 7001 (not stocked separately) Standard Packaged Set (hardware and track): Stock - Track and hardware set.

Bi-pass Door Sets up to 100 lbs./door Adjustable, side mount, for door thickness 1-3/8". Included in 72-138 Hardware Set: 7003 Track, four No. 7000 carriers, two No.

Basic Track: 7003 (not stocked separately) Standard Packaged Set (hardware and track): Stock - Track and hardware set.

1 Sliding Door Hardware Assembly Single Door Sets up to 100 lbs./door Adjustable, top mount, for door thickness 3/" and up. Included in Hardware Set: 7001 Track, two No carriers, two No top plates with adjustable pendant bolts, one No. 110 floor guide, one wrench, necessary screws, installation instructions. Basic Track: 7001 (not stocked separately) Standard Packaged Set (hardware and track): Stock - Track and hardware set ' ' ' ' Hardware Only Hardware Set - Less Track Mounting: top Adjustment: 3/ inch vertical Door thickness: 3/ to 1-3/ inches Headroom: 2-1/8 inches min. Application: single and bi-parting Track: double "I" beam; extruded aluminum Roller: nylon Stud: ezpcrs* Carrier housing: ezpcrs* Top plate: ezpcrs* Floor guide: nylon Assembly Bi-pass Door Sets up to 100 lbs./door Adjustable, side mount, for door thickness 1-3/8". Included in Hardware Set: 7003 Track, four No carriers, two No adjsutable aprons, one No. 117 floor guide, one wrench, necessary screws, installation instructions. Basic Track: 7003 (not stocked separately) Standard Packaged Set (hardware and track): Stock - Track and hardware set ' ' ' ' Hardware Only Hardware Set - Less Track Mounting: top Adjustment: 1/ inch vertical Door thickness: 1-3/8 inches Headroom: 1-7/8 inches min.; 2-1/8" max. Application: by-passing Track: double "I" beam; extruded aluminum Roller: nylon Stud: ezpcrs* Carrier housing: ezpcrs* Apron: ezpcrs* Floor guide: steel with nylon sleeves Floor Guide: For by-passing installation. Used in Non-adjustable for 1-3/8" doors. Dimensions: 3-7/8" x 2-1/8" x 3/". Material: 16 ga. steel with nylon covered steel uprights. Available Seperately Page 162

210-733-9191 1-800-950-8579 Heavy Duty Sliding Door Hardware Single Door Set 1210 Up to 175 lbs./door Adjustable, top mount, for 1" min. door thickness.

Application: single bi-parting, by-passing Track: single; extruded aluminum Roller: nylon tire with ball bearing Stud: ezpcrs* Carrier with pendant bolt and top plate: ezpcrs* Floor guide:

Lengths: ', 6', 8', 10', 12' 1210 Order: 1 pc 01201 Track width of opening 2 ea 01202 Carrier 1 ea 07015 Floor Guide (optional) 1 ea 01212 or 01213 stop (optional) 1230 Up to 275 lbs.

Parts And Accessories Lengths: ', 6', 8', 10', 12' 01201 Track: Single. For single, bi-parting or bypassing installations. Mounting holes approx. every 12 inches on center.

1230 Order: 1 pc 01201 Track width of opening 2 ea 01205 Carrier 1 ea 07015 Floor Guide (optional) 1 ea 01212 or 01213 stop (optional) 07015 Floor Guide: Surface mounted "T".

Dimensions: carrier - 1-13/16" x 2" x 1-1/8"; pendant bolt - 3/8" x 2-5/16". Top plate - 1" x 3-1/2" x 3/16". Material: ezpcrs* with nylon ball bearing rollers.

2 Heavy Duty Sliding Door Hardware Single Door Set 1210 Up to 175 lbs./door Adjustable, top mount, for 1" min. door thickness. Mounting: top Adjustment: 1/2" vertical; 3/16" horizontal Door thickness: 1 inch minimum Headroom: 3-1/" inches min.; 3-3/" max. Application: single bi-parting, by-passing Track: single; extruded aluminum Roller: nylon tire with ball bearing Stud: ezpcrs* Carrier with pendant bolt and top plate: ezpcrs* Floor guide: surface mounted "T" Zamac. Lengths: ', 6', 8', 10', 12' 1210 Order: 1 pc Track width of opening 2 ea Carrier 1 ea Floor Guide (optional) 1 ea or stop (optional) 1230 Up to 275 lbs./door Adjustable, top mount, for 1" min. door thickness. Mounting: top Adjustment: 1/2" vertical Door thickness: 1 inch minimum Headroom: 3-1/" inches min.; 3-3/" max. Application: single bi-parting, by-passing Track: single; extruded aluminum Roller: nylon tire with ball bearing Stud: ezpcrs* Carrier with pendant bolt and top plate: ezpcrs* Floor guide: surface mounted "T" Zamac. Parts And Accessories Lengths: ', 6', 8', 10', 12' Track: Single. For single, bi-parting or bypassing installations. Mounting holes approx. every 12 inches on center. Dimensions: 1-19/6" x 1-7/8" Material: extruded aluminum Order: 1 pc Track width of opening 2 ea Carrier 1 ea Floor Guide (optional) 1 ea or stop (optional) Floor Guide: Surface mounted "T". Dimensions: 3" x 7/8" 3/". Material: Zamac Carrier with Pendant Bolt and Top Plate: Two wheel. For all installations. Dimensions: carrier /16" x 2" x 1-1/8"; pendant bolt - 3/8" x 2-5/16". Top plate - 1" x 3-1/2" x 3/16". Material: ezpcrs* with nylon ball bearing rollers Stop: For use with 1210 hardware set to stop carriers. Dimensions: 1-5/8" x 1 1/2" x 5/8" x 7/8". Material: Aluminum; rubber bumpers Carrier with Pendant Bolt and top Plate: Four wheel rocker arm. For all installations. Dimensions: carrier " x 2" x 1-3/"; pendant bolt - 2-3/16" x 3/8" - 16NC.; top plate - 3-1/2" x 1" x 3/16". Material: ezpcrs* with nylon ball bearing rollers Stop: For use with 1230 hardware set to stop carriers. Dimensions: 1-5/8" x 1 1/2" x 5/8" x 1-3/". Material: Aluminum; rubber bumper. * electro zinc plated cold rolled steel (ezpcrs) Page 163

Heavy Duty Bi-Fold Door Hardware 1260 - up to 125 lbs/panel This folding door hardware has been designed specifically for heavy duty application to doors weighting up to 125 lbs.

Incorporating such advanced features as four wheel rocker arm carriers insuring constant wheel-track contact, sturdy aluminum "T" track and large nylon ball bearing wheels for silent, smooth

3 Heavy Duty Bi-Fold Door Hardware up to 125 lbs/panel This folding door hardware has been designed specifically for heavy duty application to doors weighting up to 125 lbs. each, in two or four installations. Incorporating such advanced features as four wheel rocker arm carriers insuring constant wheel-track contact, sturdy aluminum "T" track and large nylon ball bearing wheels for silent, smooth operation, the 1260 line is perfect for all commercial, residential and institutional applications. The hardware works quietly and dependably. It is easily installed and requires little or no maintenance. Finished opening to be a minimum of panel height plus -1/" (Allows no adjustment.) Max. Vertical Adj. top of door to header is 1/2". Max. Vertical Adj. bottom of door to floor is 1". Max. adj. header to floor is 1-1/2". Two panel opening width is to be width of both panels plus pivot clearance (see table below) plus 1/32" hinge clearance minimum, plus 1/8" jamb clearance minimum. Four panel opening width is equal to twice the two panel opening less 1/8" Door thickness 1" 1-1/8" 1-3/8" 1-3/" 1-7/8" Pivot Clearance 1/" 9/32" 5/16" 3/8" 7/16" Ordering Data Two Doors 1 Pc Track width of opening 1 Ea Carrier 1 Set Pivot Hardware Four Doors 1 Pc Track width of opening 2 Ea Carrier 2 Sets Pivot Hardware Ordering Data - Hardware Sets Only Jamp Pivot Carrier No. of Doors Layout Parts And Accessories Track: Single. For single, bi-parting or by-passing installations. Mounting holes approx. every 12 inches on center. Dimensions: 1-19/6" x 1-7/8" Material: extruded aluminum. Stock length: 12', will cut to ', 5' and 6' Carrier with Pendant Bolt and Top Plate: Four wheel rocker arm. For all installations. Dimensions: carrier " x 2" x 1-3/"; pendant bolt - 2-3/16" x 3/8" - 16NC.; top plate - 3-1/2" x 1" x 3/16". Material: ezpcrs* with nylon ball bearing rollers Guide Channel: Used with No Door Guide. Mortised into floor or surface mounted Dimensions 5/8 (height) x 3/ inch. Material: 3/322 inch thick extruded aluminum Door Guide: Used with No Guide Channel. Attached to bottom of lead door and runs in Guide Channel. Dimensions Plate 3/ (width) x 3-1/2 x 3/32 (thick) inch. Post 2-1/2 x 5/16 (diameter) inch. Guide Roller 13/32 (height) x 1/2 (diameter) inch. Material: Plate and Post: ezpcrs*. Guide Roller: oilite bronze. If Guide Channel and Door Guide is required order for two door: 1 Pc width of opening and 1 each 01221; order for four door: 1 Pc width of opening and 2 each Page 16

210-733-9191 1-800-950-8579 Light and Medium Duty Folding Door Hardware 1500-25 lbs and 1600-50 lbs The No. 1500 and No.

This hardware is adaptable to residential, institutional and industrial applications: a. where changing requirementsdemand alteration of room shape and size. b.

There are two types of installations: one way (where doors open from one side and fold to opposite side) and bi-parting (where doors open from center and fold to both sides). Specifications of the No.

Assemble doors on track in correct order. Hinge doors together. Ordering Data - Hardware Sets Only Jamp Pivot Carrier No.

For arrangements not shown, add one swivel carrier for every two additional doors. 01501 Track Single Box Channel Type. For folding doors. Material:.050 inch aluminum.

Order Track 01501 - width of opening Plus - 1 set of 01525 Jamb Pivot - 1 set of 01532 Carrier 01532 Swivel Carrier (w/ steel wheel ball bearing) or 01533 Swivel Carrier (w/ nylon wheel) Carrier

Ordering Information for 1600 Track For more stable installation, we recommend an even number of doors in each direction.

4 Light and Medium Duty Folding Door Hardware lbs and lbs The No and No are the light and medium duty folding door hardware, adaptable for doors from 5/8' thick and weighing up to 50 Ibs and 1600 Folding Door Hardware will accept full size jamb doors. This hardware is adaptable to residential, institutional and industrial applications: a. where changing requirementsdemand alteration of room shape and size. b. where movable partitioning is required without altering existing structure. c. where excessive opening size dictates use of this hardware. There are two types of installations: one way (where doors open from one side and fold to opposite side) and bi-parting (where doors open from center and fold to both sides). Specifications of the No and No differ. Simple installation: Mount track to header. Attach top plate to top of door and guide roller to bottom of same door, on every other door. Attach carriers to top plates. Assemble doors on track in correct order. Hinge doors together. Ordering Data - Hardware Sets Only Jamp Pivot Carrier No. of Doors Layout Ordering Information for 1500 Track For more stable installation, we recommend an even number of doors in each direction. For arrangements not shown, add one swivel carrier for every two additional doors Track Single Box Channel Type. For folding doors. Material:.050 inch aluminum. Dimensions: 1-1/32 wide x 19/32 inch. Order Track width of opening Plus - 1 set of Jamb Pivot - 1 set of Carrier Swivel Carrier (w/ steel wheel ball bearing) or Swivel Carrier (w/ nylon wheel) Carrier Body: 1-1/8" x 3/" x 5/8" inch molded nylon. Rollers: steel outer race with ball bearings. Bolt 1/" x 1-1/2" x 1-1/2" inch ezpcrs*. Packed with No top plate. Ordering Information for 1600 Track For more stable installation, we recommend an even number of doors in each direction. For arrangements not shown, add one swivel carrier for every two additional doors Track: Single Box Channel Type. For folding doors. Material.068 inch aluminum. Dimensions 1-9/16" wide x 15/16"01221 Order Track width of opening Plus - 1 set of Jamb Pivot - 1 set of Carrier Swivel Carrier Carrier body 1/16" x 1-3/" x 3/" x 5/8" ezpcrs.* Rollers: Nylon (zytel 101). Bolt: 3/8" x 2-1/" ezpcrs.* Packed with No top plate Guide Roller (Non-Adjustable): Used with Surface Mounted No guide channel. Attaches to bottom of door and runs within guide channel. Door mortising not required. Dimensions Plate: 2" x 3/" x 3/32" (thick); Roller 17/32" (height) x 1/2 inch diameter ezpcrs* Guide Channel: Used with No or No Door Guide Roller. Mortised into door or surface mounted. Dimensions: 5/8" (height) x 3/". Material" 3/32" thick extruded aluminum. 12' stock length; will cut to ', 5', 6' Guide Roller (Adjustable): Used with recessed No Guide Channel. Attached to bottom of lead door and runs in Guide Channel. Dimensions: Plate 3/" (width) x 3-1/2" x 3/32" (thick). Post 2-1/2" x 5/16" (diameter). Material: Plate and Post: ezpcrs*. Guide Roller: oilite bronze. *eiectro zinc plated cold rolled steel. Page 165

Roll Ezy Ball Bearing Track for Sliding Doors Packaged Sets P 992 ZC Complete Hardware Set for Sliding Glass Doors Stock: 36", 8", 60", 72" P-992 Packaged Track Assembly for Sliding Glass Doors

P992ZC includes: 1 each - 993 Upper Channel 2 each - 995 Shoe 2 each - 997 Carrier 1 each - 999 Lower Track Each package contains a complete set of Hardware for 1 pair of doors.

5 Roll Ezy Ball Bearing Track for Sliding Doors Packaged Sets P 992 ZC Complete Hardware Set for Sliding Glass Doors Stock: 36", 8", 60", 72" P-992 Packaged Track Assembly for Sliding Glass Doors Standard Pack: 1 set per package. Zinc plated steel with full ball bearing carriers make this ideal for larger door installations. Easily cut to fit any opening of 12 feet. P992ZC includes: 1 each Upper Channel 2 each Shoe 2 each Carrier 1 each Lower Track Each package contains a complete set of Hardware for 1 pair of doors. Pre-cut for doors to overlap 1". Ready to install. Track - Order by the foot. 993 ZC Upper Channel Guide Upper channel for top and ends of opening. Wide divider maintains door position. 5/8" high x 15/16" wide. 995ZC Shoe for Glass Doors Shoe for 1/" glass - scant or full. Lightly curved bottom for free rolling position on ball bearings. 7/16" high ZC Ball Bearing Carrier Ball Bearing carrier has free rolling balls on 3" centers. Unique design creates noiseless two-point suspension between shoe and lower track ZC Lower Track 997 Lower track is 1" high and 1" wide. Balls ride freely on curved anvil with no contact against sides of lower track. NOTE: For each foot of opening, use: 1" of upper channel and lower track and shoe (plus 1" per door for overlap), with 1-1/2" of carrier (1-1/2 times door width for each door). Glass is cut 1-1/" lower than height of opening. 999 Page 166

210-733-9191 1-800-950-8579 Components for 1/" By-passing Glass and Panel Doors #700 Series Application: Medical Cabinets,

723-1 Assembly 730-1 Assembly Component Parts for 723 and 730 Assembly *Any stock length of 12' we will cut to ', 6', and

726A - Aluminum Track for use with 730 channel. 12'stock length. 732A Upper guide, extruded aluminum.

771 Clip Guide grips edge of glass and silences operation. Color: Translucent 752 Nylon roller for use in 73 shoe only.

753 Steel ball bearing roller. For use with in 73 shoe only. No.

6 Components for 1/" By-passing Glass and Panel Doors #700 Series Application: Medical Cabinets, Displays Cabinets, Gun and Trophy Cases, Pass Thru Windows, etc Assembly Assembly Component Parts for 723 and 730 Assembly *Any stock length of 12' we will cut to ', 6', and 8'. 730A - Aluminum Channel for use as upper guide, side channel, or base for 736 track. 12' stock length. 726A - Aluminum Track for use with 730 channel. 12'stock length. 732A Upper guide, extruded aluminum. Substitute for 730 channel when greater depth is required. 12'stock length. 771 Clip Guide grips edge of glass and silences operation. Color: Translucent 752 Nylon roller for use in 73 shoe only. 723A - Aluminum Track for use with 73 shoe and 752 nylon rollers or 753 steel ball bearing roller. 12'stock length. 753 Steel ball bearing roller. For use with in 73 shoe only. No. 1087RUB Rubber Bumpers - KV Standard Pack: 100 per box Installs in jambs to cushion glass. 73A - Aluminum Shoe for use with 723 track and 752 roller or 753 roller. 12'stock length. No. 1088ANOD Steel Knob - KV Standard Pack: 50 sets per box Zinc plated steel knob. Packed in sets: 2 knobs, screws, and rubber bumpers per envelope. Page 167

7 Plastic Track and Guides for Sliding Panels KV (Knape & Vogt) For 1/" Sliding Panel Doors 212 TAN - Upper Guide 212 GRAY - Upper Guide 212 WAL - Upper Guide Dimension: 27/32" x 9/16". Stock length: 12' 216 TAN - Track 216 GRAY - Track 216 WAL - Track Dimension: 27/32" x 5/16" Fastens with brads or nails. Stock length: 12'. For 3/" Sliding Panel Doors 218 TAN - Upper Guide 218 GRAY - Upper Guide 218 WAL - Upper Guide Dimension: 1-5/16" x 3/" Stock length: 12' 220 TAN - Track 220 GRAY - Track 220 WAL - Track Dimension: 1-5/16" x 3/8" Fastens with brads or nails. Stock length: 12'. Epco For 1/2" Sliding Panel Doors 2212 Plastic Guide High impact extruded polystyrene plastic. For use with #212 track. Colors: Tan or Walnut Dimension: 1-11/22" x 3/" Stock lengths: 12' 212 Plastic Track High impact extruded polystyrene plastic. Companion to #2212 upper guide. Colors: Tan and Walnut. Dimension: 1-11/22" x 9/32" Stock lengths: 12' For 3/" Sliding Panel Doors 223 Plastic Guide High impact extruded polystyrene plastic. Companion to #23 track. Color: Gray Dimension: 1-5/16" x 3/" Stock lengths: 12' 23 Plastic Track High impact extruded polystyrene plastic. Companion to #223 upper guide. Dimension: 1-11/22" x 3/8" Color: Gray Stock Lengths: 12' *Any stock length of 12' we will cut to ', 6', and 8'. Door Pull for Glass Door 836 ANO Threaded finger pull. Two-piece screw together pull for glass 3/16" to 5/16" thick. 1-1/16" O.D. rim. Drill hole in glass 13/16" Page 168

8 Sliding Door Track 55 STL Plain finish wrought steel. 5/16" high, with 1/2" nails included. Stock: 12' 69 ZC Zinc plated steel double track, 1/" high x 1" wide. Furnished with 1/2" x 5 Flathead wood screws. Stocked: 6', 8' and 12' 953 ZC Precoated steel upper T guide used with wood framed installations. 5/8" high x 5/8" wide. Stocked 6', 8', and 12'. Sheaves 00A STL Round Groove Sheave Standard Pack: 50 per box. Ball bearing sheave, drive type. Use with No.'s. 55, 69, and 50 track. Frame 2-3/" x 7/16". Wheel 1-3/8" diameter. 02 STL Sliding Door Sheave Standard Pack: 100 per box Enclosed steel ball bearing sheave for use with KV track No's. 50, 55, and 69. Case 1-1/" x 5/16"; Flange 2-1/" x 5/16". 27 STL Standard Pack: 50 per package ball bearing round groove sheave. No's. 50, 55 and 69 track. Frame /16" x 7/16". Wheel - 1-3/16" diameter. 29 STL Standard Pack: 100 per package Round groove sheave for use with KV No's. 50, 55 and 69 track. Frame - 2-1/" x 3/8". Wheel - 1" diameter. 30 STL Ball bearing round groove sheave. Use with No's. KV 50, 55 and 69 track. Frame 2-3/" x 7/16". Wheel 1-3/8" diameter. 580 STL Standard Pack: 100 per box Nylon round groove sheave for light doors, drive type. Case dimensions 1-1/" x 5/16". 582 STL Standard Pack: 100 per box Nylon round groove sheave for light doors. Case dimensions 1-1/" x 5/16"; 2-1/" x 5/16". For use with KV No's. 50, 55 and 69 track. 592 STL Standard Pack: 100 per box Nylon sheave for thin doors. Frame 9/32" x 2-1/". Wheel 1-3/16" dia. Use with inverted 55 track. 59 STL Standard Pack: 100 per box. For heavy doors to 1-1/8" thick. Nylon round groove wheel 1-3/16" dia. Frame 2-15/16" x 7/16". With KV No's. 50, 55 and 69 track. 607 ZC Standard Pack: 50 per box Heavy duty ball bearing sheave with side fastening plate. Frame: 2-5/16" x 1 5/16". Wheel - 1-3/8" diameter. Zinc plated frame. Round groove wheel for use on track KV No's. 50, 55 and STL Standard Pack: 100 per box Axle bearing grooved steel roller. Frame - 7/16" x 1-7/8". Wheel - 11/16" x 9/32". For use with KV No's. 50, 55 and 69 track. Page 169

9 Fibre Track 201 Standard Pack: 200 per box Size 1/8" x 1/2". Stocked 6'. 206 Nylon Spring Glide 1" long x 1/" wide. 207 Nylon Spring Glide 1-3/8" long 3/8" wide. Standard Pack: 50 per box These glides are used at the bottom of doors with 201 track. 206 is 1" long x 1/" wide. 207 is 1-3/8" long x 3/8" wide. 209 Nylon Spring Guide Standard Pack: 50 per box. Spring loaded nylon guide adjusts for variations in opening. Requires 1/ 8" groove in top and cavity to accept 1-5/8" x 3/8" x 5/8" deep. Protrudes 3/16" above door. Doors can be removed easily by inserting a thin flat object and pressing down on the tension spring, Page 170

10 Flush Sliding Door Pulls 225 Flush Pull Polished wrought brass. Ideal for use on sliding doors, and doors requiring a flush mounted pull conforms to A.N.S.I. A156.9 B22201 and A156.1 D27 Packed with brads. Size: 1-1/2" x 1-3/" x 3/8" 801X BR 801x NP BR Diameter: Brass Dipped Finish Nickel Plated.775/.770 x 1/" depth. Finishes: 225 B3 Bright Brass 225 B5 Antique Brass B-8 Flush Pull - Quality 803X 803X NP Diameter: 806BR 806ANO Dimensions: Brass Dipped Finish Nickel Plated.775/.770 diameter x 3/8" depth. Brass Dipped Finish Anochrome 2-1/16" diameter over flange, bore 1-3/" diameter hole 13/32". Stamped Brass Size: 1-3/8" x " Depth: 1/2" Finishes: 605 Bright Brass 609 Antique Brass 613 Oil Rubbed Bronze 620 Antique Nickel 626 Satin Chrome Drawer Pull No ANO Nickel plated steel drawer pull. Dimensions over flange 13/16" x 2-7/8". Bore 51/6" x 2.50" x 25/6" deep. DP 6A Drawer Pull - Epco Extruded aluminum pull - 3-7/8" long, for recess mounting in 3/" doors and drawers. Fits in 1-1/" x - 7/8" cutout and secured by screws from the rear. Satin anodized aluminum finish. 2-1/8" Bore Solid Brass Finishes: B3 Bright Brass B26D Dull Chrome B26 Bright ChromeFlush Ring Pulls Flush Ring Pull 22 Flush Pull - Ives Size: 1-5/16" x 3-1/8" Polished wrought brass or bronze. Extra deep recess for good finger grip. Reverse tapered grip for ease of pulling. Finishes: 22B3 22B10 22B10B 22B26 Bright Brass Dull Bronze Oil Rubbed Bronze Bright Chrome 25B3-1-1/2" base Bright Brass 25B26D - 1-1/2" base Dull Chromium 26B26D - 2-1/8" base Dull Chromium 26B3-2-1/8" base Bright Brass Solid Brass Page 171

11 Flush Ring Pulls Solid Forged Brass 0390 Plate: 1.5" dia. Ring I.D.:.65" 0395 Finishes: 030, Plate: 1.25" x 1.5" Ring I.D.:.65" Finishes: 030, 102, 26, 050 Plate: 2.5" x 3.312" Ring I.D.: 1.5" 0393 Plate: 1.625" x 1.625" Ring I.D.:.65" Finishes: 030, 26, 050, 102 Finishes: 030, 26 Features: Solid brass construction for maximum strength and durability, Flush Ring Pulls are recommended for marine use and where flush installation is essential. Finishes: 030 Polished Brass 26 Dull Chrome 050 Antique Brass 102 Oil Rubbed Bronze Bouvet Flush Pull Material: Solid Brass 039 Plate: 1.875" x 2.5 Ring I.D.: 1" Black Finish 6-1/8" x 2-/1/" Pewter Finish 6-1/8" x 2-/1/" Finishes: 030, 26 Page 172

12 Page 173

13 Page 17

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20

Mounting Brackets for 8450 Drawer Slides KV Front Bracket 20 $1.30 KV P Rear Bracket 20 $5.20 Mounts bottom or side 1/2 clearance plus 1/32 0 lb. load with model Almond finish Integrated soft-close mechanism 32mm hole pattern with direct access mounting Lever disconnect for easy drawer removal