Card kit project sheets

Transcription

1 Card kit project sheets Use these projects to host an OWH cardmaking party! You may also use them for make-and-takes or classes, just please credit OWH.

2 1 Cut papers as per sketch. 2 Cut backer to 5.5 x 4.25; cut folding paper to 5.25 x 8, score in center. 3 Wrap ribbon around card front, tie knot. 4 Attach patterned paper panel and its layer. 5 Stamp and punch star; attach it to panel with dimensional adhesive. 6 Banner: Place stamp on acrylic block in wavy form. Stamp on scrap paper to make a template, cutting on the bottom edge of the text to create the proper wave. Stamp sentiment on final paper and emboss; then place template over stamped sentiment and mark along edge with pencil, cut with scissors. Add layer, attach with dimensional adhesive under flying edge of banner. 2 x x 3 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK & POWDER Ranger RIBBON May Arts TRIMMER Tonic Star punch Fiskars

3 1 Cut papers as per sketch. 2 Attach 2 background papers together with tape. 3 Cut and attach squares. 4 Tie ribbon around piece, and attach the whole piece to card front. 5 Stamp stars, punch or trim; attach securely, tucking some points behind ribbon. 6 Stamp sentiment. 4 x squares 4 x 1.25 Stamps Hero Arts PAPER Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic PUNCHES Fiskars

4 1 Cut and score card base as shown in diagram; cut papers as per sketch. 2 Stamp clock, diecut circles and lacey border, assemble layers; pierce with craft pick, add brad. 3 Attach papers securely. 4 Attach clock to main panel with dimensional adhesive. 5 Attach sentiment securely; tie ribbon around bottom of main panel. Attach charm with dimensional adhesive. 6 Add liner inside (4 x 4.25)..75 x x inch 2 inches 3/4 inch cut 3/4 inch cut 5-1/2 inches 6-1/2 inches 2.5 x 4 1 x 4 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic dies Spellbinders BRAD Basic Grey

5 1 Cut papers as per sketch. 2 Ink edges of patterned papers and attach layers securely. 3 Attach length of ribbon to back of cream layer, tie knot with a second length of ribbon. 4 Ink edges of patterned papers. 5 Stamp sentiment, diecut. Attach securely to card front. 5.5 x x x x x Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Ranger RIBBON May Arts TRIMMER Tonic dies Sizzix

6 Stamps Hero Arts PAPER Authentique ADHESIVE Tombow INK Tsukineko RIBBON May Arts TOOLS Ranger Industries, Spellbinders, Marhta Stewart Tonic Instructions 1 Cut papers as per sketch. 2 Attach background paper securely. 3 Attach 5 inch length of ribbon to back of cross piece and its layer; adhere to card front with dimensional adhesive. Make a knot using an extra length of ribbon. 4 Punch edge at bottom, tuck beneath cross piece. 5 Stamp house and color; diecut scallop and attach to card with dimensional adhesive. 6 Stamp and layer sentiment, attach to card. 4 x 4 3 x 2 1 x x x 4 Stamps Hero Arts PAPER Authentique ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic PUNCHES EK Success

7 1 Cut papers as per sketch. 2 Attach background paper and its layer securely to card base. 3 Assemble small rectangles securely. Stamp Mom sentiment. 4 Tie ribbon around top; adhere to card base. 5 Stamp sentiment, attach with dimensional adhesive. 2 x 3.75 x x x 3.75 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic 5.25 x 4

8 1 Cut papers as per sketch, rounding top corners. 2 Attach panels to pocket, and fold over collar. 3 Wrap 11 or 12 x 1.5 inch strip around that collar, attach securely on back of pocket card. 4 Stamp, trim, and attach stars. 5 Stamp insert, spray with distress inks x 2.5 (tucks inside pocket) x 1.75 (tucks under 5 x 3.75 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko TRIMMER and punches Tonic PUNCHES Fiskars

9 3.75 x Cut papers as per sketch. 2 Emboss background paper and attach it and its layer securely to card base. 3 Assemble small rectangle. Punch 2 holes, thread ribbon; adhere to card front. 4 Attach Candi in center of ribbon using dimensional adhesive. 5 Stamp sentiment, cut banner edge. Attach to layer, cut layer s banner edge. 6 Attach sentiment banner to card front - tape runner behind right side, dimensional adhesive behind left side. 5.5 x 4 1 x x x 2.25 Stamps Hero Arts PAPER Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts Embossing Sizzix

10 SUPPLIES SHOWN: Simple Stories paper Hero Arts stamp May Arts Ribbon Spellbinders dies plain cardstock Instructions 1 Cut papers as per sketch. 2 Attach background paper and its layer securely. 3 Diecut, stamp, and attach oval. 4 Create faux eyelets using punches, or use real eyelets. 5 Attach cross piece and its layer. 6 Attach lengths of ribbon by threading and gluing on back of center strip. 7 Adhere entire cross piece to card front x 4 2 x x x 4 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow RIBBON May Arts TRIMMER Tonic

11 1 Cut papers as per sketch. 2 Stamp stars, punch or trim out. 3 Stamp sentiment and star on panel, trim banner edge. 4 Assemble background layers, attach securely. 5 Assemble square panel layers; adhere suede ribbon to back, tie in front. 6 Attach sentiment strip securely over square panel, and foam tab under right side. 7 Attach stars with dimensional adhesive, entwining stars x x x x x 3.5 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic PUNCHES Fiskars

12 Cut papers as per sketch. 2 Card base: score at and Make a z fold. 3 Attach left panel and lace border. 4 Emboss center panel, attach to layer and to card with adhesive only under left side. 5 Stamp clock, diecut, and attach with dimensional ahdesive. 6 Stamp sentiment and punch out; attach to card front. 7 Round corners of back portion of card base and patterned paper; attach inner layer inside the card. 7 Add bling as desired x x x x x Stamps Hero Arts PAPER Hero Arts ADHESIVE Tombow INK Hero Arts TRIMMER, punches Tonic dies and embossing Sizzix

13 SUPPLIES SHOWN: Pink Paislee paper Hero Arts star stamps Instructions 1 Cut papers as per sketch. 2 Attach background papers bottom first securely. 3 Draw faux stitches on cross piece using white pen; attach using dimensional adhesive. 4 Stamp sentiment, tuck behind cross piece. 5 Stamp stars, punch or DIRECTIONS Cut papers to size as per sketch. trim; Attach attach 2 background in place securely. papers. Attach black bar with 3dimensional adhesive. Slip sentiment behind black bar. Place stars as desired. 5.5 x x x 1.5 Stamps Hero Arts PAPER Basic Grey ADHESIVE Tombow INK Tsukineko TRIMMER Tonic

14 1 Cut papers as per sketch. 2 Attach background papes securely. 3 Attach ribbon across card front with ScorTape. 4 Diecut oval and scallop; diecut small piece of green for grass. 5 Stamp house on chipboard, trim out. Punch heart. 6 Assemble oval and adhere with dimensional adhesive. 7 Stamp sentiment and cut out with circle punch, attach with dimensional adhesive x x 1.25 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic dies Sizzix

15 1 Cut papers as per sketch, rounding corners as desired. 2 Emboss patterned paper, punch bottom border, and attach securely to blue layer. 3 Attach 5 inch length of ribbon to back of blue layer; attach to card base. 4 Tie a second 5 inch length of ribbon to make a knot. Secure with glue dots as needed. 5 Diecut circle and scallops, stamp image. Assemble clock and attach with dimensional adhesive. 6 Place sticker on ribbon x x 4 5 x 3.75 Stamps Hero Arts PAPER My Mind s Eye ADHESIVE Tombow sticker SRM Stickers RIBBON May Arts TRIMMER Tonic Embossing Sizzix

16 1 Cut papers as per sketch. 2 Diecut shape; stamp sentiment and hearts. 3 Tie simple knot around middle of diecut shape. Pierce around edges with Craft Pick. 4 Adhere background papers securely; add diecut with dimensional adhesive. 2.5 x x 4 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko RIBBON May Arts DIES Spellbinder Trimmer Tonic craft pick Tonic

17 1 Cut papers as per sketch. 2 Distress green background paper with ink and attach securely. 3 Sand edges of patterned paper, DIRECTIONS Cut red layer to 5.25 x 4, green layer to 3.75 x 5. Distress with fine sand paper. Hand pierce and draw thread with white pen. distress and adhere. Cut circles; distress, assemble. Cut banner 1.5 x 3, distress, attach. Stamp and emboss hearts, attach. Punch button, thread twine; attach. attach securely. 4 Distress and sand circle layers and hanging banner, attach in order. 5 Stamp hearts, emboss as desired, trim; attach in place with dimensional adhesive. 6 Punch green button, wind twine through. 7 Add sentiment sticker to layer, 5 x inch circle 1.5 x x 4 5 x 3.75 Stamps Hero Arts PAPER Basic Grey ADHESIVE Tombow INK Ranger TRIMMER Tonic stickers SRM Stickers punch EK Success

18 1 Cut papers as per sketch. 2 Attach background paper with tape runner. 3 Diecut bracket edge, stamp sentiment, and attach to edge of front of card. 4 Attach ribbon around front of card. 5 Stamp stars, punch or trim; attach securely. remove x Stamps Hero Arts PAPER Pink Paislee ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic Die Sizzix

19 1 Cut papers as per sketch. 2 Attach background paper on right first, then black layer and second paper securely. 3 Stamp heart on ribbon; cut edge at angles. 4 Stamp sentiment, diecut white paper and larger die on black. 5 Attach ribbon to back of diecuts with gluedots. 6 Attach center section with dimensional adhesive. 2 x x 2 2 x 4 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow, Glue Dots INK Tsukineko RIBBON May Arts TRIMMER Tonic dies Sizzix 5.5x 2.25

20 1 Cut papers as per sketch. 2 Emboss large panel as desired, attach securely. 3 Wrap 5 inch length of ribbon around center panel and attach to back. Attach with dimensional adhesive. 4 Stamp sentiment, attach as desired x x 4 1 x 4 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic

21 1 Cut papers as per sketch. 2 Score main panel: along long edge, begin at.625 inches, then 1 inch each after that. Along the short edge, begin at.5 inch, then 1 inch each after that. 3 Add embellishment to each joining line brads, Pearl Pen, white pen, or bling. 4 Attach background layers to card base. 5 Attach cross piece layers; wrap twine around three times, tie a bow. Secure to card front with dimensional adhesive 6 Stamp sentiment, punch or trim as desired, attach behind twine. 5.5 x 4 1 x x x x 5.5 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko Score tool ScorPal PUNCHES Stampin Up

22 Door opens to reveal heart Instructions 1 Cut papers as per sketch. 2 Ink edges of patterned papers, attach securely. 3 Stamp fence on cream, layer on navy, attach securely. 4 Stamp house, cut out, adhere with dimensional adhesive. 5 Stamp sentiment on both pattern and cream; diecut shape, trim cream square with scissors. Assemble, adhere with dimensional adhesive. 6 Stamp house on brown, trim door. Score along left side, and attach to house. 7 Punch heart and attach inside the door x 4 5 x x x x x x 4.25 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Tsukineko dies Spellbinders TRIMMER Tonic

23 1 Cut papers as per sketch. 2 Cut card base front to 3.25 x 5.5 inches, leaving back panel at 5.5 x Round 2 corners of front. 3 Attach patterned paper to front and black layer inside card. 4 Stamp sentiment and layer on black. After attaching, cut angles on left side. 5 Fold sentiment panel 1inch from right side; adhere behind white layer; attach white inside the card. 6 Punch a button or use a real one; tie twine through holes, tie bow. 7 Lay card flat, and attach button in place with glue dot to hold down sentiment x x x 4 1 x x 4 Stamps Hero Arts: Year Round Sentiments PAPER Echo Park ADHESIVE Tombo, Glue Dots INK Tsukineko TRIMMER Tonic ROUNDER PUNCH Tonic Button punch Martha Stewart ay Arts TOOLS Tonic, Martha Stewart button punch

24 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TOOLS Tonic trimmer Instructions 1 Cut papers as per sketch. 2 Stamp sentiment in lower area 3 Attach white and black layers securely. 4 Wrap a 5 inch length of ribbon around front of those layers, attach to back of black layer. 5 Tie a second 5 inch length of ribbon in a knot around center. Secure with glue dots as needed to hold horizontal position. 6 Attach these layers to red layer; attach entire section to card base. 7 Stamp heart, trim; attach in place with dimensional adhesive. 5 x x x 4 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic

25 1 Cut papers as per sketch. 2 Punch bottom edge of patterned paper. 3 Attach 5 inch length of wide ribbon to back of patterned paper. Then attach 5 inch length of thinner ribbon atop it and around the back. Tie another 5 inch length of wide ribbon in a knot, secure with gluedots as needed. 4 Distress sentiment piece, stamp sentiment and hearts. Color hearts with Spica pen. 5 Attach sentiment panel to card front. 6 Cover hearts with Glossy Accents. Set aside to dry. 3 X x 4 Stamps Hero Arts PAPER Pink Paislee ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic Glossy accents Ranger

26 1 Cut papers as per sketch. 2 Round bottom corners as shown. 3 Stamp kite, cloud, and sentiment on white panel; stamp cloud again to trim out with detail scissors. 4 Stamp kite on a scrap paper; trim out with detail scissors. 5 Attach cloud securely; attach kite head with dimensional adhesive. 6 Attach adhesive gems. 2 x x x x 3.75 Stamps Hero Arts PAPER Bazzill ADHESIVE Tombow INK Tsukineko TRIMMER Tonic SCISSORS Tonic PUNCH Tonic COLOR Copic Markers

27 GALA Instructions 1 Cut papers as per sketch. 2 Emboss 1/3 of card base. 3 Punch bottom edge of background paper and attach securely. 4 Layer image panel; stamp, color, attach with dimensional adhesive. 5 Create ribbon candy: Attach left loop with glue dot first, and curl loop; attach with glue dot. Fold back to create second loop, attach with glue dot, then make third loop. Trim edge as desired and attach securely with glue dot. 6 Stamp sentiment, attach with dimensional adhesive x x x x after border is punched Stamps Hero Arts PAPER Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON Bazzill Basics TRIMMEr and punch Tonic color Copic

28 1 Cut papers as per sketch. 2 Attach background paper and its black layer securely. 3 Attach cross piece and its layer; secure to card front securely. 4 Punch holes above strip; thread black suede cord through holes, attach at lower ends. 5 Stamp stars, punch or trim; attach in place with dimensional adhesive over ends of cord. 6 Wrap small piece of cord around top of previously-attached cord, tie knot. 7 Stamp sentiment and cut out with oval punch, attach with dimensional adhesive..75 x x x x 5 Stamps Hero Arts PAPER Echo Park ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic PUNCHES Fiskars

29 1 Cut papers as per sketch. 2 Attach paper layers together securely and mount onto kraft card base. 3 Attach vertical strip and ribbon. 4 Stamp and diecut clock, add brad, attach securely. 5 Stamp sentiment, attach with dimensional adhesive. 4.5 x x x 1 1 x x 2.5 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic brad Basic Grey

30 1 Cut papers as per sketch. 2 Attach background paper securely. 3 Attach banner rectangle to its white layer; cut banner edge on both at once. 4 Diecut heart, stamp sentiment slightly offcenter to allow room for bow. Punch a single hole for ribbon; see photos below to attach ribbon. 5 Attach heart using dimensional adhesive. 6 Attach ribbon using ScorTape x x 5.5 Wrap ribbon around and tuck 2 ends into hole from the back side. Adjust front so the two ribbon ends are on either side of the ribbon strip. Tie a simple knot. Back is tidy and flat. 4.5 x 3.25 Stamps Hero Arts PAPER Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic die Sizzix

31 1 Cut papers as per sketch. 2 Sand edges of background papers, and attach securely to card base. 3 Create ribbon candy: Stamp sentiment onto it first. Attach right loop with glue dot, and curl loop; attach with glue dot. Fold back to create second loop, attach with glue dot, then make third loop. Trim edge and attach securely with glue dot. 6 Stamp image, diecut layers as desired; attach with dimensional adhesive. 1.5 x x x 4.25 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Tsukineko RIBBON May Arts Dies Sizzix

32 1 Cut 4.25 inch scalloped circle. 2 Fold A2 card base in half; place round 4 inch die on top with small portion hanging over the crease. Run through Big Shot. 3 Score card base on ONE side, 1 inch from crease, using ScorBuddy. 4 Stamp cloud, kites, and sentiment. 5 Punch three holes above crease; tie ribbons on. 6 Attach back of card base to scalloped base. 7 Stamp kites on scrap paper; cut out kites and attach. Color kite ties as desired. Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic dies Sizzix

33 1 Cut papers as per sketch. 2 Attach 5 inch lengths of three ribbons to the back of the yellow layer. Attach yellow layer securely to red layer. 3 Tie knots with extra 5 inch lengths of ribbon. 4 Punch star embellishment in a circle, diecut larger circle and smaller blue circle; attach all three in order. Securely attach to card front. 5 Stamp sentiment x 4 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER and punch Tonic

34 1 Cut papers as per sketch. 2 Attach background paper securely. 3 Attach the two large squares at 45 degree angles. Place alternating squares around the pinwheel; the last one gets tucked partly under the first one. 4 Attach the pinwheel to the card front with dimensional adhesive. 5 Stamp sentiment and cut it out with a slot punch. Attach to front of pinwheel. 2 squares 2.25 x squares 1 x x 4.25 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Tsukineko TRIMMER Tonic slot punch Stampin Up

35 1 Cut papers as per sketch. 2 To make dimensional ruffle: Attach bottom piece first (flat) to background piece. Second piece from bottom: tape runner under top (flat) edge, dimensional under ruffled edge. Same for third and top pieces of ruffle. 3 Tie jute around piece; attach to card base securely. 4 Stamp sentiment. 5.5 x 4 4 x 1.25 (after punching border) 4 x 1.25 (after punching border) 4 x 1.25 (after punching border) 4 x 1.25 (after punching border) Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic PUNCHES Fiskars

36 1 Cut papers as per sketch. 2 Attach panels to pocket, and fold over collar. 3 Wrap 11 or 12 x 1.25 inch strip around that collar, attach securely behind place where sentiment will attach. 4 Tie ribbon around pocket and knot. 5 Stamp, trim, and layer sentiment; punch hole. 6 Thread knot through hole, attach sentiment with dimensional adhesive. 7 Attach 2 layers of insert. 5.5 x 2.5 (tucks inside pocket) 3 x x x 1.75 (tucks under collar) x x 4 Stamps Hero Arts PAPER Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic

37 1 Cut papers as per sketch. 2 Punch border in kraft paper; attach to red layer. Stamp sentiment. 3 Attach 5 inch length of ribbon around the back of red layer; adhere the whole piece to card base. 4 Stamp stars, punch or trim; attach with glue dots. 5 x 3.75 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic PUNCHES Fiskars 5.25 x 4

38 1 Cut papers as per sketch. 2 Stamp stars on green layer; attach background layers securely. 3 Stamp sentiment, trim and attach to its layer and adhere to card front securely. 4 Punch holes in strip using craft pick; attach to card with dimensional adhesive. 5 x x 1.5 x x 4 Stamps Hero Arts ADHESIVE Tombow INK Colorbox TRIMMER Tonic CRaft pick Tonic

39 SUPPLIES SHOWN: Simple Stories paper Hero Arts stamps EK Success border punch 1 Cut papers as per sketch. 2 Attach background paper securely. 3 Punch border, attach securely to card front. 4 Punch circles and attach. 5 Stamp stars, punch or trim; attach in place. 6 Stamp sentiment x x 1.25 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Tsukineko TRIMMER Tonic

40 1 Cut papers as per sketch. 2 Stamp and emboss star panel. 3 Attach layers securely to brown layer. 4 Attach ribbon to back of brown layer; attach all securely to card front. 5 Stamp ssentiment, diecut, attach to its layer and secure to card front with dimensional adhesive x x x 2.25 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK and EP Ranger RIBBON May Arts TRIMMER Tonic dies Sizzix 2.25 x

41 1 Cut papers as per sketch. 2 Attach background papers to black layer with tape runner. 3 Attach ribbon around the back of the black layer, attach all to card base. 4 Attach center panels together securely, adhere to card front. 5 Stamp stars, punch or trim; attach in place with dimensional adhesive. 6 Stamp sentiment, add layer, adhere with dimensional adhesive x x x x x x 2.25 Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Tsukineko TRIMMER Tonic

42 1 Cut papers as per sketch.i nk edges as desired. 2 Attach background papers to black layer with tape runner. 3 Attach ribbon around the back of the black layer, attach all to card base. 4 Attach sticker and its panels together securely, adhere to card front. 5 Stamp stars, punch or trim; attach in place with dimensional adhesive x 4 3 x 2 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Ranger STICKERS SRM Stickers

43 1 Cut papers as per sketch. 2 Attach background layers securely; attach 6 inch length of ribbon around back of green cardstock, then attach whole piece to card base. 3 Stamp sentiment and kite on white; diecut with circle. Cut scallop as well. 4 Attach circles with dimensional adhesive, tucking under ribbon. 5 Stamp kite on scrap paper; trim kite top and adhere securely. 6 Add extra flowers to inside of card x x x 4 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic dies Sizzix

44 SUPPLIES SHOWN: Hero Arts stamps Simple Stories papers Ranger Glossy Accents and distress inks Instructions 1 Cut papers as per sketch. 2 Distress edges of background paper, and attach it and its layer securely to card base. 3 Distress square piece, attach it and its layer securely to the card front securely. 4 Stamp hearts on various scraps, trim. Adhere small hearts. 5 Cover one large heart with Glossy Accents; set aside to dry. 6 Stamp sentiment and heart; attach to its layer DIRECTIONS Cut papers as indicated in sketch. Stamp sentiment and heart, layer. Attach layers, distress as desired. Stamp hearts, trim out. Add Glossy Accents as desired. and card front securely. 7 Attach large heart once dry, using dimensional adhesive. 3.5 x x x x x 1 Stamps Hero Arts ADHESIVE Tombow paper Simple Stories INK Ranger RIBBON May Arts TRIMMER Tonic PUNCHES Fiskars

45 1 Cut two 4.25 inch scalloped circles. 2 Fold A2 card base in half; place round 4 inch circle die on top with small portion hanging over the crease. Run through Big Shot. 3 Score card base on ONE side, 1.75 inch from crease, using ScorBuddy (see fig A). 4 Attach unscored card base to one scallop; attach bottom of front scallop to lower portion of scored side (see fig B). 5 Attach patterned paper circle and stars to front. 6 Secure scrap strips using glue dot; attach heart over glue dot using dimensional adhesive. 7 Stamp sentiment, attach to its layer; secure inside card with dimensional adhesive. Optional: write Lean card front here to stand this card up like an easel just above sentiment panel, in pencil. Write very small. fig A card base Stamps Hero Arts PAPER Graphic 45 ADHESIVE Tombow INK Hero Arts dies Sizzix fig B profile view

46 1 Cut papers as per sketch. 2 Attach background paper to card base. 3 Stamp white panel. 4 Attach center portion layers; tie ribbon around it. 5 Attach center panel to card base x x x x Stamps Hero Arts ADHESIVE Tombow INK Hero Arts RIBBON May Arts TRIMMER Tonic

47 1 Cut papers as per sketch. 2 Sand background paper, punch holes, and attach securely. 3 Attach vertical piece to its layer, wrap ribbon around it and tie off. Attach with dimensional adhesive. 4 Stamp and trim sentiment; attach with tape runner under left side, dimensional under right half x x x 1.75 Stamps Hero Arts PAPER BoBunny ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic

48 1 Cut papers as per sketch. 2 Ink edges of background paper and attach it to its black layer securely. 3 Attach 5 inch length of ribbon to back of black piece and attach it all to the card base. 4 Tie a second length of ribbon in knot. 5 Ink edges of center panel, tuck bottom behind ribbon while attaching securely to card front. 6 Stamp, trim, round, and layer sentiment panel. 2.5 x x x x x 4 Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow INK Ranger RIBBON May Arts TRIMMER Tonic

49 1 Cut papers as per sketch. Top panel is 3inches prior to punching border. 2 Stamp background paper and round corners. 3 Adhere layers of paper securely. 4 Wrap ribbon around top panel and tie bow before adhering panel with dimensional adhesive. 5 Attach sentiment with dimensional adhesive. 6 Stamp and diecut clock; pierce hole, add brad; attach with dimensional adhesive. 2.5 x x x x 4 Stamps Hero Arts ADHESIVE Tombow INK Tsukineko RIBBON May Arts TRIMMER Tonic PUNCH EK Success

50 1 Cut papers as per sketch. 2 Distress edges of paper with ink. 3 Stamp sentiment. 4 Stamp and emboss heart. 5 Layer all papers shown securely. Before adhering center panel, attach a loop of ribbon to back of panel. 5 x x x x 2 5 x x x Stamps Hero Arts PAPER Simple Stories ADHESIVE Tombow TRIMMER Tonic Embossing powder Ranger RIBBON May 2 x Arts 5.25