1PMT5.0AT1G/T3G Series

Size: px

Start display at page:

Download "1PMT5.0AT1G/T3G Series"

Oswald Cameron
5 years ago
Views:

1 TV Diodes urface Mount > > PMT5.TG/T3G eries PMT5.TG/T3G eries Pb OBOLETE/EOL DTE une/3/8 PCN/ECN# LFPCN446 Description The PMT5.TG/T3G eries is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping capability, high surge capability, low Zener impedance and fast response time. The advanced packaging technique provides for a highly efficient micro miniature, space saving surface mount with its unique heatsink design. t has the same thermal performance as the M while being 5% smaller in footprint area, and delivering one of the lowest height profiles (. mm) in the industry. Because of its small size, it is ideal for use in cellular phones, portable devices, business machines, power supplies and many other industrial/consumer applications. Features Maximum Ratings and Thermal Characteristics tand off Voltage: 5. V 58 V Rating Maximum Ppk Dissipation, (P / µs) (Note ) (PMT5. PMT36) ymbol Value Unit Peak ms (PMT5. PMT36) ms (PMT4 PMT58) Maximum Clamp Peak Pulse Current Maximum Ppk Dissipation, (P / µs) (Note ) (PMT4 PMT58) Maximum Ppk Dissipation, (P 8/ µs) (Note ) m Low Leakage Response Time is Typically < ns ED Rating of Class 3 (> 6 kv) per Human Body Model Low Profile Maximum Height of. mm DC Power T = 5 C (Note ) Derate above 5 C Thermal Resistance, unction to mbient T, Tstg m/ºc C ntegral Heatsink/Locking Tabs Full Metallic Bottom Eliminates Flux Entrapment mall Footprint Footprint rea of 8.45 mm Thermal Resistance, unction to Lead (node) R8anode 35 C/ PD 3. 3 C/ Lead Orientation in Tape: Cathode (hort) Lead to procket Holes Maximum DC Power Dissipation (Note 3) Thermal Resistance, unction to Tab (Cathode) R8cathode Operating and torage Temperature Range T, Tstg 55 to +5 Bi-directional Cathode ndicated by Polarity Band These Devices are Pb Free and are RoH Compliant Functional Diagram C tresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Cathode node. Nonrepetitive current pulse at T = 5 C.. Mounted with recommended minimum pad size, DC board FR t Tab (Cathode) temperature, Ttab = 75 C dditional nformation Uni-directional Datasheet Resources amples 7 Littelfuse, nc. pecifications are subject to change without notice. Revised: 9/4/7

2 TV Diodes urface Mount > > PMT5.TG/T3G eries -V Curve Characteristics (T = 5 C unless otherwise noted) ymbol V Parameter PP Maximum Reverse Peak Pulse Current VC Clamping PP VRM orking Peak Reverse Voltage R Maximum Reverse Leakage VRM VBR Breakdown T T Test Current F Forward Current VF Forward F Ratings and Characteristic Curves Figure. Pulse Rating Curve Figure. X µs Pulse aveform, PULE DTH (tp) DEFNED THT PONT HERE THE PEK CURRENT DECY TO 5% OF RM. PEK VLUE - RM VLUE (%) PP, PEK POER (TT) tr HLF VLUE - RM 5 t ʺ s tp., 3 Figure 3. 8 X µs Pulse aveform tr % OF PEK PULE CURRENT 9 Figure 4. Pulse Derating Curve 6 PEK VLUE 8 s PEK PULE DERTNG N % OF PEK POER OR T = 5 C PULE DTH (tp) DEFNED THT PONT HERE THE PEK CURRENT DECY = 8 s HLF VLUE s tp 4 6 t, TME ( s) 4 t, TME (ms) tp, PULE DTH ( s) T, MBENT TEMPERTURE C) ( 7 Littelfuse, nc. pecifications are subject to change without notice. Revised: 9/4/7 5

3 TV Diodes urface Mount > > PMT5.TG/T3G eries Figure 5. Typical Derating Factor for Duty Cycle Figure 6. teady tate Power Derating.7 DERTNG FCTOR PULE DTH ms..7.5 ms s..5 s D, DUTY CYCLE (%) T, TEMPERTURE ( C) Figure 7. Forward Voltage Figure 8. Capacitance vs. orking Peak Reverse Voltage,.. C, CPCTNCE (pf) V,F TYPCL FORRD VOLTGE (VOLT) TL.5.3. P D, MXMUM POER DPTON () ZERO B 5% VRM T, TEMPERTURE ( C) ORKNG PEK REVERE VOLTGE (VOLT) Typical Protection Circuit Zin Vin LOD VL 7 Littelfuse, nc. pecifications are subject to change without notice. Revised: 9/4/7

4 TV Diodes urface Mount > > PMT5.TG/T3G eries Electrical Characteristics (TL = 3 C unless otherwise noted, VF =.5 m) Device* Device Marking V RM V T (V) (Note 6) T V RM V PP PP () (Note 5) MN NOM MX (m) (µ) (V) (Note 7) PMT5.TG, T3G MKE PMT7.TG, T3G MKM PMTTG, T3G MLE PMT6TG, T3G MLP PMT8TG, T3G MLT PMTTG, T3G MLX PMT4TG, T3G MLZ PMT6TG, T3G MME PMT8TG, T3G MMG PMT3TG, T3G MMK PMT33TG, T3G MMM PMT36TG, T3G MMP PMT4TG, T3G MMR PMT48TG, T3G MMX PMT5TG, T3G MMZ PMT58TG, T3G MNG / sine wave (or equivalent square wave), P = 8.3 ms, duty cycle = 4 pulses per minute maximum. 5. transient suppressor is normally selected according to the orking Peak Reverse Voltage (VRM) which should be equal to or greater than the DC or continuous peak operating voltage level. 6. VBR measured at pulse test current T at ambient temperature of 5 C. 7. urge current waveform per Figure and derate per Figure 4. *The G suffix indicates Pb Free package. 7 Littelfuse, nc. pecifications are subject to change without notice. Revised: 9/4/7

5 TV Diodes urface Mount > > PMT5.TG/T3G eries Dimensions oldering Footrpint F.8 (.3)CM T B C PN B.54. K PN R.7.5 L CLE : mm inches D H.8 (.3)CM T B T Dim nches Min ORDERNG NFORMTON Millimeters Max Min Max B Device Package PMTxxTG POERMTE 3, / Tape & Reel POERMTE, / Tape & Reel (Pb Free PMTxxT3G (Pb Free) C D F H Peak Temperature : 6OC Dipping Time : seconds K L R REF.5 REF Flow/ave oldering (older Dipping) Physical pecifications Case Void-free, transfer-molded, thermosetting plastic Leads Modified L Bend providing more contact area to bond pads Finish ll external surfaces are corrosion resistant and leads are readily solderable Mounting Position ny NOTE:. DMENONNG ND TOLERNCNG PER N Y4.5M, 98.. CONTROLLNG DMENON: MLLMETER. 3. DMENON ND B DO NOT NCLUDE MOLD FLH, PROTRUON OR GTE BURR. MOLD FLH, PROTRUON OR GTE BURR Part Marking ystem hipping MRKNG DGRM CTHODE M= Mxx= M Mxx NODE Date Code pecific Device Code (ee Table on Page 3) =P b Free Package Disclaimer Notice - nformation furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at: 7 Littelfuse, nc. pecifications are subject to change without notice. Revised: 9/4/7

1PMT5.0AT1G/T3G Series

1PMT5.0AT1G/T3G Series Surface Mount > W > PMT5.ATG/T3G Series PMT5.ATG/T3G Series Pb Description The PMT5.ATG/T3G Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent