Overview Universal Shaft Transmitter

PCM - Sensor Telemetry for Turbo Prop/Jet Application

PCM - Sensor Telemetry for Turbo Prop/Jet Application Modular/Compact simultaneous high-frequent strain gauge Measurement 0 to 50 khz up to 50 (100) channels Partenaire en France MANNE MA Sensortelemetrie

Coupling inductive Sensortelemetry Rotor loop, Pick up

Coupling inductive Sensortelemetry otor loop, Pick up page 2... configuration page 3... 4... overview coupler page 5.. 15... transmission types page 16.. 20... rotor loop page 21.. 45... pick up M MANNE

RMC S ENSOR TELEMETRY. A Sensortelemetrie M MANNER. FGP Sensors & Instrumentation

RMC S ENSOR TELEMETRY FGP Sensors & Instrumentation M MANNER A Sensortelemetrie FGP Sensors & Instrumentation ZI- 24 rue des Dames - 78340 LES CLAYES SOUS BOIS Tél. : 01 30 79 65 40 - scom@fgp.tm.fr -

Special Solution for Wheel and Axial Shafts Wheel transmitter, Universal shaft transmitter

Special Solution for Wheel and Axial Shafts Wheel transmitter, Universal shaft transmitter File:...\AXLE_SHAFT_SOLUTIONS.cdr // 20100601 Axial shaft / Wheel transmitters Standard transmitting solution

Radio Sensortelemetry

adio Sensortelemetry * S hort des cription of radio telemetry page 2... 3 * otating part to stationary part page 4... 10 * P oint to point page 11 * Antenna divers ity page 12 * Multi channel telemetry

Digital RMC-Sensor-Telemetry with 16 Bit resolution and direct PC Interface

Digital MC-Sensor-Telemetry with 16 Bit resolution and direct PC Interface M MANNE A Sensortelemetrie File:...\DIGITAL_EMOTE_SENSOTELEMETIE.cdr // 20090316 Datei Info Nullpunkt Meßbereich 1-100 -80 Zusatzfunktionen

P125 High pressure sensor

Ranges from 2000 to 7000 bar Stainless steel Robust for Fatigue testing High level output in option For static and dynamic applications Linearity up to ±0.3% F.S. DESCRIPTION The P125 is a high pressure

XP5 Miniature pressure sensor

Absolute, sealed and gauge ranges 1 to 350 [15 psi to 5 000 psi] Titanium construction Amplified output available For static and dynamic applications Linearity up to ±0.25% FSO DESCRIPTION The XP5 miniature

ARD154. DIN rail mountable amplifier for strain gage sensors. User s guide. User s guide ARD CONNECTING 4-WIRE SENSORS

6. CONNECTING 4-WIRE SENSORS Connections : S+ connected to module A+ S- connected to module A- Shield connected to A- or to GND of analog output Nota: A- and GND are connected together inside the module.

K3D60a ±100N. Description. The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes.

K3D60a ±100N Description The K3D60a three-axis sensor is suitable for measuring force on three mutually perpendicular axes. The new 3-axis sensor K3D60a is a further development of the series K3D60 and

Torque Sensor Series 3000 and Series 4000

Properties Sensorshaft with integrated torque and angle measurement Non-contact measurement system, high robustness Plug & Play solution, no additional electronics required Performance Measurement range

ELPF Load Cell DESCRIPTION

Compact Tension/Compression Design 10 500 lbf High Level and mv Output High Stability Industry Standard Packing Resists Off Axis Load Components Full NIST Traceable 11 Point Calibration Shielded Teflon

Rotary Encoder System Compact Model Range

we set the standards RIK Rotary Encoder System Compact Model Range 2 Incremental rotary encoder Features Compact design, consisting of scanning head with round cable, 15pin D-sub connector and grating

Dx: Digital Multi-Channel Telemetry System

Instrumented shaft with signal conditioning and transmitter unit (SCT) and inductive power supply Receiver, Control and Interface Unit (RCI) For measurements with rotating objects, a telemetry system for

A Simple Pressure Sensor Signal Conditioning Circuit

INTRODUCTION A simple signal conditioning circuit should allow the output of the amplifier to be independent of the sensor used, providing interchangeability and high level output at very low cost. A laser

spinner ContactleSS data & POwertransmission

spinner ContactleSS data & POwertransmission Edition A/2014 High Frequency Performance Worldwide www.spinner-group.com For more than 65 years, SPINNER Group has been setting new standards worldwide in

T40B. Torque Flange. Special features. Data sheet. Overall concept

T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal

Acceleration Sensor AS - 022

1 Application Acceleration Sensor AS - 022 The acceleration sensor AS-022 is used for measurement of vibration acceleration. Fig. 1 Acceleration Sensor AS - 022 2 Measuring Principle 3 Technical Data Acceleration

Express Delivery. Axial. Connection

HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

BRUSHLESS DC geared motors

0 Watts with Ø 6 mm planetary gearbox Concentric output shaft Ideal for high reduction ratios Ideal for high torque applications High efficiency Reversible Output speed Available torque stage stages stages

Signal Conditioning for MEAS Pressure Sensors

INTRODUCTION Piezo resistive pressure sensors provide an analog output signal that is proportional to input pressure. The typical full scale span for this type of integrated sensor is 100 mv which is sufficient

Top-Innovator MotorAnalyzer 1. Multi-purpose testers for electric motors and windings. Made in Germany Expect more.

Top-Innovator 2014 MotorAnalyzer 1 Multi-purpose testers for electric motors and windings Made in Germany Expect more. EN Winding testers 1 The MotorAnalyzer 1 the multi-purpose tool The MotorAnalyzer

Absolute Rotary Encoder EXAG Explosion Proof. Device Net

Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable Parameters

Telemetrie-Messtechnik Schnorrenberg

Telemetrie-Messtechnik Schnorrenberg CT16-Wheel User manual TMS Telemetrie-Messtechnik Schnorrenberg Dipl.-Ing. Werner Schnorrenberg Habichtweg 30, D-51429 Bergisch Gladbach, Tel: 02204-9815-52, Fax: 02204-9815-53,

FC22 Compression Load Cell

10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design CE Compliance DESCRIPTION The FC22 is a medium compression force sensor that creates new markets previously unrealizable

Incremental Encoder Model: FOI58

Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85

Datasheet. messtechnik gmbh. Torque ranges from 0,5 to 1000 Nm. Features. Extra Features DRBK-A. Torque Transducer DRBK + DRBK-A

messtechnik gmbh tel. +49 (0)79 72 93 10-0 hagstrasse 10. D-74417 gschwend vertrieb@eth-messtechnik.de Datasheet Torque Transducer DRBK + DRBK- Torque ranges from 0,5 to 1000 Nm Features Very short Broad

Telemetrie-Messtechnik Schnorrenberg

Telemetrie-Messtechnik Schnorrenberg CTP8-Rotate 8 (4) channel telemetry for rotating applications like wheels or rotors, high signal bandwidth, 16bit, software programmable Inputs for STG, TH-K, ICP or

Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.

Technical Information Condumax W CLS9 Conductivity sensors Two-electrode sensors with cell constants k = 0.0 cm or k = 0. cm Application Measurement in pure and ultrapure water: Monitoring ion exchangers

MT32 Telemetry. KMT - Kraus Messtechnik GmbH. Multi channel telemetry system for rotating application. Powering (rotor) by battery or inductive

KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com MT32 Telemetry Multi channel telemetry

Absolute Rotary Encoder EXAG Explosion Proof. Canopen

Main Features - Approval: II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Interface: CAN - Protocol: - Max. 65536 steps per revolution (16 Bit) - Max. 16384 revolutions (14 Bit) - Code: Binary Programmable

GS030. Crane Slew-Angle Wireless Measurement Sensor. Features. Application

Features Crane Slew-Angle Wireless Measurement Sensor Resolution of 0.1 Accuracy: typical: 0.5 over 360 Range: 0 to 360 Rugged water proof enclosure IP66 Potted electronics for increased water protection

Huba Control FEINE MESSIDEEN FÜR DRUCK UND STRÖMUNG FOR FINE PRESSURE AND FLOW MEASUREMENT LA FINESSE DES MESURES DE PRESSION ET DE DEBIT

694 Relativ- und Differenz-Drucktransmitter Relative and differential pressure transmitter Transmetteur de pression relative et différentielle 0.5 +0.5 mbar / 0 1 50 mbar Huba Control FEINE MESSIDEEN FÜR

Installation and Operational Instructions for ROBA -DS couplings Type 95. _ (disk pack HF) Sizes

95. _ (disk pack HF) Sizes 6 22 Please read these Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting

CTP16-Rotate. KMT - Kraus Messtechnik GmbH

KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP16-Rotate 16 channel telemetry

Permanent fasteners: Riveted joints Welded joints Detachable joints: Threaded fasteners screws, bolts and nuts, studs. Cotter joints Knuckle joints

Instructional Objectives At the end of this lesson, the students should have the knowledge of Fasteners and their types: permanent and detachable fasteners. Different types of pin joints. Different types

WSM22 - Magnetic shaft encoder

WSM22 - Magnetic shaft encoder Based on Dipole Magnet and Hall Sensors WSM22 magnetic encoder module consists of a encoder body and a magnet holder. The magnet holder is fitted on the rotating shaft and

Installation Manual Integration

Integration and mechanical adjustment for diameter gauge www.detector-france.com A - PRESENTATION OF DIAMETER GAUGE 2 A-1 - Rrobes F00 and F00L 2 A-2 - Internal Sensor with radial ouput 3 B - ADJUSTMENT

CAEMAX D x telemetry. digital modular convenient. Modular, multi-channel telemetry system for a variety of applications. productive testing

CAEMAX D x telemetry digital modular convenient Modular, multi-channel telemetry system for a variety of applications productive testing CAEMAX D x telemetry Digital, multi-channel telemetry system Advantages

RECEIVER SECURYFILL IV

RIVR SURYFILL IV Q S ISO 00 RTIFI FIRM INSTLLTION S GUI MX ROHSTR GUGS INTRNTIONL S.. Z.I. WVR NOR - v.lavoisier, - -00 WVR (elgium) Tel. ++ (0)/4.. - Fax ++ (0)/.. 0/0 Rev. Optoelectronic Transmitter

Rotary Rheostats Hardware Reference

Document 1101066 - Edition June 2009 Table of Contents 1 Main Features...3 2 Product Selection Guide 2.1 Product Selection Table...4 2.2 Maximum Current... 4 3 Base Models 4.1 Model T16...5 4.2 Model T25...

T10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en

T10F Torque Flange Data Sheet Special features Extremely short design High permissible dynamic loads High permissible transverse forces and bending moments Very high torsional stiffness Contactless Selectable

3. HIWIN rotary tables TMS

CRD Devices Ltd All Saints Industrial Estate, Shildon, Co, Durham, DL4 2RD Tel: +44 ()1388 7784 Fax: +44 ()1388 7788 E: sales@crd-devices.co.uk W: www.crd-devices.co.uk 3. HIWIN rotary tables TMS 3.1 Characteristics

8661 EN. Precision Torque Sensor Non-contact transmission for rotating applications optional measurement of angle and speed.

Precision Torque Sensor Non-contact transmission for rotating applications optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 1-2 weeks 24 months CAD data 2D/3D for this sensor:

KMT - Kraus Messtechnik GmbH

KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page: http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com TEL1-PCM-BATT Operating Instructions

n Measuring range ,02 N m to N m n Clockwise and counter-clockwise torque n Low linearity deviation of ± 0.05 % F.S.

Precision Torque Sensor Non-contact transmission for rotating applications Optional measurement of angle and speed Model 8661 Code: Delivery: Warranty: 2-3 weeks 24 months Application The 8661 precision

Catalog of CLA force and torque sensors

Catalog of CLA force and torque sensors SC-002 LC-01 LC-10 TSF-000 TSF-05 TSF-1 TSF-100 Micro-force sensor Force sensor Micro-torque sensor Torque sensor Phone +41 32 421 44 90, Fax +41 32 421 44 91, ventes@cla.ch,

NPN PNP NPN PNP NPN PNP

Cam Positioner Low-Cost, High-Performance Electronic Cam Switch for Use with OMRON E6F Rotary Encoder Control outputs can be programmed to turn ON/OFF in 1 units of rotary encoder shaft rotation Handles

9mm Size Metal Shaft Snap-in Type. Single-unit and dual-unit types suit a variety of controls. Typical Specifications. Total resistance tolerance ±20%

K09L 9mm Size Snap-in Single-unit and dual-unit s suit a variety of controls Typical Specifications Items Specifications tolerance ±% Maximum operating voltage V AC, V DC Total rotational angle 300 ± otational

Catalogue : XS-Platforms

Catalogue : XS-Platforms Services Travaux Acrobatiques Sàrl Ch. de Bois-Riant 1-1661 Le Pâquier - 026 / 921 39 94 info@travauxacrobatiques.ch - www.travauxacrobatiques.ch XTS-SAFETY EYE Access to Innovation

Sub-surface milling machines

machines RUWI reserves the right to make changes in accordance with technical progress. Titman Tip Tools Limited Valley Road Clacton on Sea Essex CO15 6PP Tel. (+44) 1255 220 123 Fax: (+44) 1255 221 422

PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com www.pwb-encoders.com 1 of 9 Description The ME22 is a reliable low cost optical

Tools for crimp contacts

Tools for crimp termination D-Sub-S, D-Sub-HD, DIN 41 612 Identification Service crimp tool standard contacts high density contacts Part No. 09 99 000 0175 09 99 000 0596 HARTING- Crimp tool for 500 bandoliered

Characteristics curve Fluid: water p: 1 bar. Weight. Sectional diagram. no. [kg]

otorised valve For neutral gases and liquids G / to G female thread Cartridge system ublication 7559.06.06.97 Operating pressure -0.9 to 0 bar (see table) Catalogue index 6 0 series Description (standard

Optical encoder MEC22 HR

Optical encoder MEC22 HR Description The MEC22 HR is a high resolution optical hollow shaft encoder that can be fixed quickly and easily on different sizes of motor shafts. The encoder provides two square

Sensors for Small Forces

Force Sensors for Small Forces 0,5... 0,5 N to 500... 500 N Type 9203, 9205, 9207, 9215A, 9217A These slim sensors are designed for dynamic and quasistatic tensile and compression forces. Depending on

T22. Torque transducer. Special features. Data sheet

T22 Torque transducer Special features - Nominal (rated) torques 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, Nm, Nm, 50 Nm, 0 Nm, 0 Nm, 500 Nm and 1 knm - Nominal (rated) rotational speed up to 000 rpm (depending on measuring

HIGH SPEED SPINDLES OIL TURBINE DRIVEN

HIGH SPEED SPINDLES OIL TURBINE DRIVEN be driven. 2 The Toodle is a new, high speed, turbine-driven spindle. It costs a fraction of competing spindle systems... The Toodle may be driven by through-coolant,

Condumax W CLS19. Technical Information. Conductivity sensors Two-electrode sensors with cell constants k = 0.01 cm 1 or k = 0.

Technical Information Condumax W CLS9 Conductivity sensors Two-electrode sensors with cell constants k = 0.0 cm or k = 0. cm Application Measurement in pure and ultrapure water: Monitoring ion exchangers

ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:

ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog

Universal rotary hammer drill, 2,5 kg, SDS-plus. CHE 2-28 SDS-plus

Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Universal rotary hammer drill, 2,5 kg, SDS-plus CHE 2-28 SDS-plus Order number 43.666 No load speed 0-300 rpm Blows per minute 0-4000

Rotary Measurement Technology Incremental Encoders

-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

Electrical Temperature Measurement

Electrical Temperature Measurement Resistance Thermometers Model TR10-B, for Additional Thermowell Applications Machinery, plant and tank construction Energy and power plant technology Chemical industry

Radio Sensortelemetry

Radio Sensortelemetry * Short description of radio telemetry page 2 3 * Rotating part to stationary part page 4 20 * Point to point page 21 * Antenna diversity page 22 * Multi channel telemetry page 23

ATEX CIE-2 x 2 x 0.75 mm 2 -Twisted Pair (TP)-Cable

ATEX CIE-2 x 2 x 0.75 mm 2 -Twisted Pair (TP)-Cable Cable routing and connection instructions For signal transmission from PXD Sensors and/or AISC Equipment (Suppressors) to the Control Panel, preferably

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80

Digital Telemetry Solutions

Digital Telemetry Solutions integrated flexible reliable Wireless measurement data transmission in machinery, facilities and vehicles imc - productive testing www.imc-tm.com/telemetry Your benefits at

Calibration Procedure for the Heathkit Antenna Tuner SA-2060 and SA2060A

Calibration Procedure for the Heathkit Antenna Tuner SA-2060 and SA2060A Prepared by: Derf Mockford G8ZGK 17 November 2007 Page 1 Manufacturer: Models: Heathkit SA-2060, SA-2060A SPECIFICATIONS: Frequency

KMT - Kraus Messtechnik GmbH

KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP8-Rotate 8 (4) channel telemetry

PE Electrical Machine / Power Electronics. Power Electronics Training System. ufeatures. } List of Experiments

Electrical Machine / Power Electronics PE-5000 Power Electronics Training System The PE-5000 Power Electronics Training System consists of 28 experimental modules, a three-phase squirrel cage motor, load,

Digital Telemetry Solutions

Digital Telemetry Solutions integrated flexible reliable Wireless measurement data transmission in machinery, facilities and vehicles imc - productive testing Telemetry: the bridge to your test data Advanced

LENORD. +BAUER... automates motion. MiniCoder GEL 2444K Speed and position sensor with metal housing and sin/cos output

MiniCoder GEL 2444K Speed and position sensor with metal housing and sin/cos output LENORD +BAUER... automates motion. Technical information Version 03.3 General The measuring unit comprises a sensor and

PIEZOELECTRIC OPTICAL MECHANISMS - PRODUCT AND WARRANTY INFORMATION

PIEZOELECTRIC OPTICAL MECHANISMS - PRODUCT AND WARRANTY INFORMATION Version : 3.1.1 Date 16/03/06 CEDRAT TECHNOLOGIES URL: http://www.cedrat.com 15, Chemin de Malacher - Inovallée Email: actuator@cedrat.com

Vipros 357 Queen Machine Programming Limits

Vipros 357 Queen Machine Programming Limits 7025 Firestone Blvd. Buena Park, CA 90621 Phone: 714-739-2111 Fax: 714-739-4099 Email Info@amada.com Print Date 01/31/2001 Revision 4.0 Page 1 of 11 Table of

SEM104 SERIES. SEM104P Pt100 Temperature Transmitter. SEM104TC Thermocouple Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.

INDEX SECTION CONTENTS PAGE NO. SEM104 SERIES SEM104P Pt100 Temperature Transmitter SEM104TC Thermocouple Temperature Transmitter SEM104P 1 1.0 DESCRIPTION 2 2.0 SPECIFICATION 2 3.0 INSTALLATION 24 4.0

Overview: Extensions. Stepper Motors. Stepper motor with motor brake Permanent magnet brake for 24V supply DC

ZSH 7 to 7 -Phase Hyrid Stepper otor ZSH Precision Stepper otors The highly dynamic ZSH -phase hyrid stepper motors are constructed for operation in industrial environment. Holding torques:. to 7 Nm. ZSH

Installation guide Roof reflector

Installation guide Roof reflector January 2010 Part no. 4416.580 Rev. 4 Enraf B.V. P.O. Box 812 2600 AV Delft The Netherlands Tel.: 015-2701100 Fax: 015-2701111 Email: enraf-nl@honeywell.com Offices in:

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:

ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog

Wireless Data Transfer System for Rotating Machinery - Very Robust Against Electromagnetic Interference

Wireless Data Transfer System for Rotating Machinery - Very Robust Against Electromagnetic Interference Johann Wassermann, Manfred Schneeberger, Franz Höftberger Institute of Mechanics and Mechatronics,

Servo Amplifier 4-Quadrant PWM for Brushless DC-Servomotors

Servo Amplifier -Quadrant PWM for Brushless DC-Servomotors Series BLD 010 Operating Instructions Index Chapter 1. Description 2. Illustration 3. Specification. Dimensions. Safety notes.1 Skilled personnel.2

Data Sheet MEM 16. Incremental Encoder Magnetic

Incremental Encoder Magnetic PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com MEM16IE Rev.2.1 / 15.12.2016 info@pwb-encoders.com

Product Information. ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control

Product Information ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control July 2017 ECN/ERN 1300 series Rotary encoders with integral bearings for elevator

K3R110 ±50N; ±100N, ±200N; ±500N, ±1000N, ±2000N; ±5000N

K3R110 ±50N; ±100N, ±200N; Description The force sensor K3R110 is suitable for inspection tasks in quality assurance as well as in materials testing because of its compact design. This precision force

Overview: Extensions Stepper motor Stepper motor with motor brake Permanent magnet brake for 24V supply DC

ZSH 7 to 7 -Phase Hyrid Stepper otor ZSH Precision Stepper otors The highly dynamic ZSH -phase hyrid stepper motors are constructed for operation in industrial environment. Holding torques:. to 7 Nm. ZSH

Rotary position sensor with ohmic signal output or voltage output

Rotary position sensor with ohmic signal output or Measuring principle Operating temperature hange in resistance on the voltage divider, hall-effect Type R1: 50... 360 in 10 steps (linear acquisition angle)

ModulLine MP 25. System overview. 1 Chain bracket. 2 Strain relief. Chain bracket flexible. Frame bridge RS-ZL. STF Steel Fix

ModulLine MP 25 System overview 1 Chain bracket 2 Strain relief Chain bracket flexible Frame bridge RS-ZL STF Steel Fix 3 2 1 140 3 Shelving system Technical data Separator TR Loading side Inside or outside

GENYMAB RANGE SOMAB. Combination of a 5-axis machining centre and a lathe

SOMAB GENYMAB RANGE GENYMAB RANGE Multi function machining centre Turning, milling, gear machining From 4 to 9 axes, with tool changer SOMAB Société de Mécanique et d Automatisme du Bourbonnais Switchboard

Altitude and Airspeed Measurements Temperature Range. Range psid psig psia 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to to to 300

PC Board Mountable Pressure Sensor 0-100 mv Output Voltage Excitation Differential, Gage, and Absolute Temperature Compensated DESCRIPTION The MS4425 is a temperature compensated, piezoresistive silicon

Our wires. & cables INDEX. Insulated wires p2-p3. TAU cables p12-p15. Twisted wires p4-p7. TFA cables p16-p19. Shielded wires p8-p11

Insulated wires p2-p3 TAU cables p12-p15 Twisted wires p4-p7 TFA cables p16-p19 www.industrifil.com Rue des vergers ZAC Saint roman 30470 - Aimargues France conception / réalisation : atelier v & b selle

AXON J1DB. digital 1-channel telemetry for strain gauge measurement with additional monitoring of inductive energy on the rotor unit

AXON J1DB digital 1-channel telemetry for strain gauge measurement with additional monitoring of inductive energy on the rotor unit 03/2014 Operating priciple Rotor- and Statorantenna - inductive power

Guide to GNSS Base stations

Guide to GNSS Base stations Outline Introduction Example of a base station (TUMSAT) Preparation for setting up a base station Procedure for setting up a base station Examples at two other universities

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL

Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096

Looking for magnetic parts? Low Permeability Nanocrystalline Cores Nanophy. Material on design Permeability on demand

Looking for magnetic parts? kµ cores Low Permeability Nanocrystalline Cores Nanophy Stainless & Nickel Alloys Components Material on design Permeability on demand Permeability range from 2 to 3 Material

Rotary Position Technology Incremental Encoders

-40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments Model IS-20-H

Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments WIKA Data Sheet PE 81.51 Applications

Turnado 280. Turnado 280. Lead Screw and Feed Shaft Lathe. Including 3-axis position indicator.

Lead Screw and Feed Shaft Lathe Including 3-axis position indicator Center width up to 115 inch Turning diam. over bed Removable bridge for machining of large diameters Stop spindle with four adjustable

Torque Measuring Transducer. File: g:\...\messwelle.cdr //

Torque Measuring Transducer File: g:\...\messwelle.cdr // 20180110 Miniature Torque Measuring Shaft without Bearings (0.5 Nm to 500 Nm) Characteristics: * Coupling with Lenze clamping elements * Very small

GS Strain gauge reader/ transmitter. GS series of wireless industrial sensors. Features: General Description: Applications:

GS series of wireless industrial sensors Strain gauge reader/ transmitter Features: Input: strain gauge Wheatstone bridge: 300ohms to 10kohms. Typical: 1000 ohms. Standard input range: up to 2mV/V full

U10M. Force Transducer. Special features. Data sheet. Mounting dimensions of the connection variants in mm [inch]

U10M Force Transducer Special features - Precise and robust tensile/compressive force transducer for static and dynamic measurement tasks - High lateral force and bending moment stability, the effect of