Altitude and Airspeed Measurements Temperature Range. Range psid psig psia 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to to to 300
|
|
|
- Alaina Williamson
- 5 years ago
- Views:
Transcription
1 PC Board Mountable Pressure Sensor mv Output Voltage Excitation Differential, Gage, and Absolute Temperature Compensated DESCRIPTION The MS4425 is a temperature compensated, piezoresistive silicon pressure sensor packaged in a dualin- line configuration and intended for cost sensitive applications where excellent performance and long-term stability are required. Integral temperature compensation is provided over a range of 0-50 C using laser-trimmed resistors. The pressure sensor is available in absolute, gage or differential pressure ranges from 0-1 to psi. The pressure ports are 1/8 barbed ports which mate with 3/32 ID tubing. These tubes are parallel to the printed circuit board to allow other boards to be located above the sensor. For a vertical mounted tube in gage or absolute pressure, refer to the MS4426. FEATURES APPLICATIONS Dual-in-Line Package Medical Instruments 0ºC to 50ºC Compensated Altitude and Airspeed Measurements Temperature Range Process Control ±0.15% Pressure Non Linearity Factory Automation Solid State Reliability Leak Detection STANDARD RANGES Range psid psig psia 0 to 1 0 to 5 0 to 15 0 to 30 0 to 50 0 to to to 300 1/6
2 PERFORMANCE SPECIFICATIONS Supply Voltage: 12V Ambient Temperature: 25 C (unless otherwise specified) Pressure applied to Port 2 PARAMETERS MIN TYP MAX UNITS NOTES Span (0-1 psi) mv 1 Span (0-5 psi) mv 1 Span (0-15 to 0-50 psi) mv 1 Span (0-100 & psi) mv 1 Span (0-150 psi) mv 1 Zero Pressure Output -1 ±0.2 1 mv 1 Pressure Non Linearity (Gage & Absolute) % Span 2 Pressure Non Linearity (Differential) % Span 2 Pressure Hysteresis ± % Span Input Resistance KΩ Output Resistance Ω Temperature Error Span % Span 3 Temperature Error Zero ± mv 3 Supply Voltage V Long Term Stability (Offset & Span) ±0.1 mv 4 Pressure Overload (Differential) 3X Rated 5 Common Mode Pressure 400 psi Compensated Temperature 0 50 ºC Operating Temperature ºC Storage Temperature ºC Humidity 0 85 % RH Weight 3 grams Solder Temperature 260ºC Max 5 Sec. 6 Media Non-Corrosive Dry Gases Compatible with Silicon, Pyrex, RTV, Ceramic & Gold Notes 1. Ratiometric to supply voltage. 2. Best fit straight line. Non linearity for 5 psi Differential devices is 0.75%. 3. Maximum temperature error between 0 C and 50 C with respect to 25 C. For errors beyond the compensated temperature, see Temperature Error Multiplier Chart below. 4. Long term stability over a one year period with constant voltage and temperature. 5. 3X or 400 psi max, whichever is less. 6. For more details refer to 4425/4426 Mounting Application Note /6
3 DIMENSION 3/6
4 4/6
5 CONNECTIONS PACKAGE STYLE, PINOUT, AND PORT DESIGNATION 5/6
6 ORDERING INFORMATION D F Coating (F - Gel Fill, Blank = No Coating) Type (D = Differential, A = Absolute, G = Gage) Pressure Range Model NORTH AMERICA EUROPE ASIA Measurement Specialties Northport Loop West Fremont, CA Tel: Fax: Sales: pfg.cs.amer@meas-spec.com Measurement Specialties (Europe), Ltd. 26 Rue des Dames F78340 Les Clayes-sous-Bois, France Tel: +33 (0) Fax: +33 (0) Sales: pfg.cs.emea@meas-spec.com Measurement Specialties (China), Ltd. No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen China Tel: Fax: Sales: pfg.cs.asia@meas-spec.com The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer s technical experts. Measurement Specialties, Inc. does not convey any license under its patent rights nor the rights of others. 6/6
FC22 Compression Load Cell
10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design CE Compliance DESCRIPTION The FC22 is a medium compression force sensor that creates new markets previously unrealizable
A Simple Pressure Sensor Signal Conditioning Circuit
INTRODUCTION A simple signal conditioning circuit should allow the output of the amplifier to be independent of the sensor used, providing interchangeability and high level output at very low cost. A laser
Signal Conditioning for MEAS Pressure Sensors
INTRODUCTION Piezo resistive pressure sensors provide an analog output signal that is proportional to input pressure. The typical full scale span for this type of integrated sensor is 100 mv which is sufficient
ELPF Load Cell DESCRIPTION
Compact Tension/Compression Design 10 500 lbf High Level and mv Output High Stability Industry Standard Packing Resists Off Axis Load Components Full NIST Traceable 11 Point Calibration Shielded Teflon
FC22 Compression Load Cell
10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design DESCRIPTION The FC22 is a medium compression force sensor that creates new markets previously unrealizable due
XP5 Miniature pressure sensor
Absolute, sealed and gauge ranges 1 to 350 [15 psi to 5 000 psi] Titanium construction Amplified output available For static and dynamic applications Linearity up to ±0.25% FSO DESCRIPTION The XP5 miniature
U5700 Submersible Liquid Level Pressure Transducer
High Accuracy CE Compliant Compact Variety of Pressure Port Configurations Waterproof Optional Stainless Steel Snubber IP68 Rated Connection and Submersible Polyurethane Jacketed Cable Gage, Sealed, Absolute,
P125 High pressure sensor
Ranges from 2000 to 7000 bar Stainless steel Robust for Fatigue testing High level output in option For static and dynamic applications Linearity up to ±0.3% F.S. DESCRIPTION The P125 is a high pressure
Pressure Sensors, Accelerometers, and Custom Microstructures
Sensors, Accelerometers, and Custom Microstructures IC SENSORS Products Databook Consistent with Measurement Specialties, Inc. policy of continually updating and improving its products, the type designation
MiniSense 100 Analog PCB
Evaluation Circuit for Vibration Sensor Low Power Battery Powered LED for Trigger High Sensitivity Analog and Digital Signal Access Points The LDTC MiniSense 100 Analog PCB provides a simple way to evaluate
M5200 Industrial Pressure Transducer
CE Compliant Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber Weatherproof Gage, Sealed, Compound DESCRIPTION The M5200 pressure transducers
ARD154. DIN rail mountable amplifier for strain gage sensors. User s guide. User s guide ARD CONNECTING 4-WIRE SENSORS
6. CONNECTING 4-WIRE SENSORS Connections : S+ connected to module A+ S- connected to module A- Shield connected to A- or to GND of analog output Nota: A- and GND are connected together inside the module.
MPXM2051G, 0 to 50 kpa, Gauge Compensated Pressure Sensors
Freescale Semiconductor Document Number: Data Sheet: Technical Data Rev. 3.0, 11/2015, 0 to 50 kpa, Gauge Compensated Pressure The device is a silicon piezoresistive pressure sensor providing a highly
U5200 Industrial Pressure Transducer
High Accuracy Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Absolute, Compound Expedite Configurations Available
80 khz Cylindrical Ultrasound Transducer
Omni-directional Horizontal Beam Directivity Broad Bandwidth Low Resonance Q Excellent Impact Resistance Lightweight Low Cost Piezoelectric Film (PVDF) 80 khz Ultrasound Transducers offer unique advantages
Linear measurement with a magnetic pole stripe (I 2 C-Mode)
Linear measurement with a magnetic pole stripe (I 2 C-Mode) KMA36 / Demo board Version: 1.0 July 2012 Please use also KMA36 white paper and KMA36 data sheet Hauert 13, D-44227 Dortmund, Germany 1 of 7
miniature pressure sensors
miniature pressure sensors Prime Grade Pressure Sensors Features General Description 0 to 0.3 to 0 to 15 Pressure Ranges % linearity...highest accuracy version Temperature Compensated Calibrated Zero and
Freescale Semiconductor Data Sheet: Technical Data
Freescale Semiconductor Data Sheet: Technical Data Media Resistant and High Temperature Accuracy Integrated Silicon Sensor for Measuring Absolute, On-Chip Signal Conditioned, Temperature Compensated and
ATA-2001 Analog LVDT/RVDT Signal Conditioner with digital calibration
115 or 220 VAC line powered Microprocessor controlled calibration Superior digital filtering Selectable excitation frequencies & amplitudes Voltage and current outputs 250 to 1000Hz selectable frequency
Accelerometer ACH-01. Piezoelectric Accelerometer Wide Bandwidth; AC Coupled Ultra Low Power High G Ranges
Piezoelectric Accelerometer Wide Bandwidth; AC Coupled Ultra Low Power High G Ranges The ACH-01 is an inexpensive, general purpose accelerometer with outstanding performance characteristics. The use of
NDT1-220K Ultrasonic Transducer
Low cost ultrasonic transducer Flexible Format 3 MHz nominal center frequency High Bandwith; Low Q Performance Low Impedance The NDT1-220K element offers outstanding ultrasonic transducer performance in
SCX Series Precision compensated pressure sensors
FEATURES 0...1 psi to 0...150 psi Precision temperature compensation Calibrated zero and span Small size Low noise High accuracy High impedance for low power applications APPLICATIONS Medical equipment
XPC10 High temperature miniature pressure sensor
Absolute, sealed and gauge ranges 10 to 500 bar [150 to 7 500 psi] High temp. operation from -40 up to 220 ºC [-40 to 428 F] Stainless steel construction Amplified output available For static and dynamic
U5300 Industrial Pressure Transducer
SPECIFICATIONS Superior Accuracy and Total Error Band Instrument Grade and Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. nc. SEMICONDUCTOR TECHNICAL DATA The MPX2050 series device is a silicon
Freescale Semiconductor, Inc. SEMICONDUCTOR TECHNICAL DATA
nc. SEMICONDUCTOR TECHNICAL DATA The MPX2100 series device is a silicon piezoresistive pressure sensor providing a highly accurate and linear voltage output directly proportional to the applied pressure.
MPX2010 SEMICONDUCTOR TECHNICAL DATA. COMPENSATED PRESSURE SENSOR 0 to 10 kpa (0 to 1.45 psi) FULL SCALE SPAN: 25 mv
SEMICONDUCTOR TECHNICAL DATA Order this document by MPX2010/D The MPX2010/MPXT2010 series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output directly proportional
P-Series Inclinometer
Single or Dual axis inclinometer Measurement range +/-5 +/-15 and +/- 45 High accuracy Digital and analogue output signal DESCRIPTION The P-Series of conductive inclinometers offers modern technology in
TSYS02S Digital Temperature Sensor
High Accuracy Temperature Sensor 16 bit Resolution High Speed, low Response Time Low Power Consumption SDM Output representing Analogue Voltage Small TDFN8 Package DESCRIPTION The TSYS02S is a single chip,
Model 140 Inline Amplifier
Model 140 Inline Amplifier Low Noise Inline Amplifier Small Rugged Package Includes Auto-Zero Function The Model 140 is a remote in-line DC amplifier designed to be used with bridgetype mv output transducers.
Freescale Semiconductor, I
nc. SEMICONDUCTOR TECHNICAL DATA Order this document by MPXAZ4115A/D Motorola s MPXAZ4115A series sensor integrates on chip, bipolar op amp circuitry and thin film resistor networks to provide a high output
PSI Temperature Scanners
Networkable Voltage & Temperature Instruments Withstand 30 g and 160 db Smart Connector with Auto Sensor Discovery NetScanner Compatible DESCRIPTION The PSI 9146 and 9046-S are networkable instruments
AccuStar Electronic Clinometer
+/-60 o total sensing range CE certified Analog, digital and PWM outputs High accuracy / low cost Lightweight and compact Rugged plastic housing DESCRIPTION The AccuStar Electronic Clinometer is an extremely
Freescale Semiconductor, I
nc. SEMICONDUCTOR TECHNICAL DATA Order this document by MPX200/D The MPX200 series device is a silicon piezoresistive pressure sensors provide a very accurate and linear voltage output directly proportional
Freescale Semiconductor, I
nc. SEMICONDUCTOR TECHNICAL DATA Order this document by MPX5500/D The MPX5500 series piezoresistive transducer is a state of the art monolithic silicon pressure sensor designed for a wide range of applications,
SX Series Pressure sensors
FEATURES 0...1 to 0...300 psi Absolute, differential and gage devices High impedance bridge Low power consumption for battery operation APPLICATIONS Industrial controls Pneumatic controls Medical instrumentation
ORDERING INFORMATION # of Ports Pressure Type Device Name Case No.
Freescale Semiconductor 50 kpa On-Chip Temperature Compensated and Calibrated Silicon Pressure The series devices are silicon piezoresistive pressure sensors that provide a highly accurate and linear voltage
SEMICONDUCTOR TECHNICAL DATA
SEMICONDUCTOR TECHNICAL DATA Order this document by MPX5050/D The MPX5050/MPXV5050G series piezoresistive transducer is a state of the art monolithic silicon pressure sensor designed for a wide range of
HS1101LF Relative Humidity Sensor
Lead free component High reliability and long term stability Patented solid polymer structure Suitable for linear voltage or frequency output circuitry Fast response time and very low temperature coefficient
HM1500LF Relative Humidity Module
Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage supply from 4.75Vdc
TSYS01 Digital Temperature Sensor
High Accuracy Temperature Sensor 16/24 bit Resolution Low Power SPI/I 2 C Interface QFN16 Package DESCRIPTION The TSYS01 is a single chip, versatile, new technology temperature sensor. The TSYS01 provides
E2-Series Inclinometer
Dual axis inclinometer Measurement range +/-5 +/-0 +/-5 and +/- 45 Analogue voltage output signal OEM module DESCRIPTION The E2- series is a biaxial inclination sensor as a pcb module for OEM use with
Freescale Semiconductor
Freescale Semiconductor Data Sheet: Technical Information Pressure Document Number: Rev 3, 1/2013 High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On-Chip Signal
SEMICONDUCTOR TECHNICAL DATA
SEMICONDUCTOR TECHNICAL DATA Order this document by MPX4250/D The Motorola MPX4250 series Manifold Absolute Pressure (MAP) sensor for turbo boost engine control is designed to sense absolute air pressure
HTG3500 Series Relative Humidity and Temperature Module
HTG3500 Series Relative Humidity and Temperature Module Suitable for small bulk assembly Product free from Lead, Cr (6+), Cd and Hg. Compliant with RoHS Full interchangeability. Better than +/-3%RH and
160PC...-PCB Series Fully signal conditioned low pressure transducer
y signal conditioned low transducer FEATURES Pressure ranges from 0...±.5 inh O (0...±6. cm H O) to -0... cm H O 1...6 output Output riometric to supply voltage Precision temperure compensed and calibred
ATA-2001 Analog LVDT/RVDT Signal Conditioner with digital calibration
SPECIFICATIONS 115 or 220 VAC line powered Microprocessor controlled calibration Superior digital filtering Selectable excitation frequencies & amplitudes Voltage and current outputs 250 to 1000Hz selectable
Instruction Manual Single and Dual Axis Inclinometer V-Series
Instruction Manual Single and Dual Axis Inclinometer V-Series Version 1.1 Hauert 13, D-44227 Dortmund, Germany 1 of 15 fax: +49-(0)231-9740-200 Table of Contents 1 Introduction...3 2 Notice...3 3 History...3
SEMICONDUCTOR TECHNICAL DATA
SEMICONDUCTOR TECHNICAL DATA Order this document by MPX200/D The MPX200 series device is a silicon piezoresistive pressure sensors provide a very accurate and linear voltage output directly proportional
ED-17 Serial Output Magnetic Encoder
9-bit absolute encoder Serial SSI interface IP52 sealing Ball bearing Excellent stability no optic degradation Custom housings, shafts, connectors available in most cases with little tooling costs DESCRIPTION
HTM25X0LF Temperature and Relative Humidity Module
Hermetic Housing Humidity calibrated within +/-2% @55%RH Temperature measurement through NTC 10kOhms +/-1% direct output Small size product Typical 1 to 4 Volt DC output for 0 to 100%RH at 5Vdc DESCRIPTION
AMS 5915 Amplified pressure sensor with digital output (I²C)
MS 91 mplified sensor GENERL DESCRIPTION MS 91 sensors are a series of high-precision OEM sensors with a digital I2C-interface. They combine a micromachined, high quality piezoresistive measuring cell
EPIH Sub-Miniature Pressure sensor
Sub-Miniature Pressure sensor SPECIFICATIONS Ranges 0.35 to 20 bar (5 to 300 psi) Extremely small size Flush diaphragm High frequency response Various housings available The EPIH is a subminiature pressure
RMO Series Precision compensated pressure sensors
FATURS 0... to 0..., 0...4 inch O to 0...0, absolute, gage or differential Precision temperature compensated Calibrated offset and span Sensortechnics PRO services MDIA COMPATIBILITY Non-corrosive, non-ionic
5 A SPX29501/02. Now Available in Lead Free Packaging
November 2008 5 A P SPX29501/02 5A Low Dropout Voltage Regulator Rev. B FEATURES Adjustable Output Down to 1.25V 1% Output Accuracy Output Current of 5A Low Dropout Voltage: 420mV @ 5A Tight Line Regulation:
Data Sheet P993 Low Range Differential Pressure PCB Mount Sensor
Data Sheet P993 Low Range Differential Pressure PCB Mount Sensor Main Features Electrical Connection Pressure Connection Housing Material Output Signal 1, 2, 5, 10, ±1, ±2, ±5 Inches of H2O 3 solderable
ATA-2001 Analog LVDT/RVDT Signal Conditioner with digital calibration
115 or 220 VAC operation Microprocessor controlled calibration Superior digital filtering Selectable excitation frequencies & amplitudes Voltage and current outputs 250 to 1000Hz selectable frequency response
Freescale Semiconductor, I
High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On- Chip Signal Conditioned, Temperature Compensated and Calibrated Motorola s MPXA611A/MPXH611A series sensor
OPERATION MANUAL LDM-1000
OPERATION MANUAL LDM-1000 TE CONNECTIVITY SENSORS /// LDM-1000 OPERATION MANUAL P/N 09290100-000 REV. C 05/2016 Page 1 Table of Contents 1. Introduction...3 2. Product Specifications...3 3. Product Description...4
DUAL LOW NOISE OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description Features The consists of two low noise, high performance operational amplifiers. It is specially suitable for applications in differential-in, differential-out as well as in industrial
HMI Series Amplified pressure sensors
FEATURES 00 mbar to 0 bar, to 0 psi gage or differential pressure Increased media compatibility Digital I²C bus output Precision ASIC signal conditioning Calibrated and temperature compensated 2 SIL and
5A LOW DROPOUT LINEAR REGULATOR. Features. Applications
General Description The is a series of low dropout positive voltage regulators with a maximum dropout of.5v at 5A of load current. The series features on-chip thermal limiting which provides protection
M5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations Optional Stainless Steel Snubber CE Compliant
DUAL BIPOLAR OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description The consists of two high performance operational amplifiers. The IC features high gain, low equivalent input noise voltage, high input resistance, excellent channel separation, wide
LM725 Operational Amplifier
LM725 Operational Amplifier General Description The LM725/LM725A/LM725C are operational amplifiers featuring superior performance in applications where low noise, low drift, and accurate closed-loop gain
LOW POWER LOW OFFSET VOLTAGE DUAL COMPARATORS. Features
General Description The consist of two independent precision voltage comparators with a typical offset voltage of 1.0mV and high gain. They are specifically designed to operate from a single power supply
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output Up to ±0.1% Accura
SPECIFICATIONS High Accuracy Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Absolute, Compound Expedite Configurations
CTE7000 Series Miniature pressure transmitters
CTE7 Series FEATURES mbar to 7 bar gage bar to 7 bar absolute,, or output Single supply Field interchangeable Rugged stainless steel housing SERICE Pressure inlet: any non-ionic, non-corrosive media compatible
Miniature pressure sensor
SPECIFICATIONS Ranges 0.5 to 350 bar [7 psi to 5 000 psi] Absolute, sealed and gauge Titanium construction For static and dynamic applications Linearity up to ±0.25% FS The XP5 serie is designed in titanium
CTE8000 Series OEM pressure transmitters for industrial media
CTE8 Series FEATURES...- bar to... bar gage or absolute For many industrial gases and liquids...,.5...4.5,...5 and 4... ma output Field interchangeable For industrial use SERICE Pressure inlet: Housing:
Series T. General Eastern Differential Pressure Transmitters. GE Sensing. Description
Description The Series T family of differential pressure transmitters measure low pressures and feature low power consumption and a variety of analog signal outputs. A wide selection of standard pressure
BLC Series Low Pressure Compact Sensors
n Fi Applications Original On File General Description The BLC Series Basic Low Pressure Compact Sensor is based on CoBeam 2 TM Technology. The device provides a high output signal at a low operating voltage
11A, 650V, Super Junction N-Channel Power MOSFET SRC11N65. Symbol SRC11N65. G: Green
General Description The Sanrise SRC11N65 is a high voltage power MOSFET, fabricated using advanced super junction technology. The resulting device has extremely low on resistance and fast switching time,
MPXAZ6115A MPXHZ6115A SERIES
MOTOROLA nc. SEMICONDUCTOR TECHNICAL DATA Order this document by MPXAZ611A/D Media Resistant and High Temperature Accuracy Integrated Silicon Pressure Sensor for Measuring Absolute Pressure, On -Chip Signal
LM79XX Series 3-Terminal Negative Regulators
3-Terminal Negative Regulators General Description The LM79XX series of 3-terminal regulators is available with fixed output voltages of 5V, 12V, and 15V. These devices need only one external component
600mA LOW DROPOUT LINEAR REGULATOR 600mA ULDO REGULATOR WITH ENABLE. Features. Applications
General Description The is a series of ultra low dropout regulators optimized for low voltage applications where transient response and minimum input voltage are critical. The provides current limit and
Ultra-Low Pressure Digital Sensor
Ultra-Low Pressure Digital Sensor SM9541 Series FEATURES Fully digital, pressure calibrated and temperature compensated output I 2 C Digital Interface Compensated temperature range: -5 to 65 o C Compound
340kHz, 2A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 2A load with high efficiency, excellent line and load regulation.
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
STANDARD ELECTRICAL SPECIFICATIONS POWER RATING / ELEMENT (1) RANGE NO. OF P 70 C PINS Ω W MDP 14 MDP 16 01 05 01 05 0.2 0.2 Consult factory Consult factory Notes (1) For resistor power ratings at + 25
Signal Conditioning Amplifier
2300 System Micro-Measurements FEATURES Accepts all strain gage inputs (foil and piezoresistive), potentiometers, DCDT s, etc Selectable bridge excitation, 0.7 to 15 VDC (11 steps), plus 0.2 to 7 VDC continuously
LOW POWER DUAL OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description Features The consist of two independent, high gain and internally frequency compensated operational amplifiers, they are specifically designed to operate from a single power supply.
DUAL OP AMP AND VOLTAGE REFERENCE General Description. Features
General Description The is a monolithic IC specifically designed to regulate the output current and voltage levels of switching battery chargers and power supplies. The device contains two Op Amps and
TSYS02P Digital Temperature Sensor
SPECIFICATIONS High Accuracy Temperature Sensor 16 bit Resolution High Speed, low Response Time Low Power Consumption PWM Output Small TDFN8 Package The TSYS02P is a single chip, temperature sensor. It
MICROMACHINED SILICON MODULAR PRESSURE SENSOR
MICROMACHINED SILICON MODULAR PRESSURE SENSOR Configurable High Accuracy High Temperature Performance For Industrial, Test and Measurement, and Aerospace Applications Low Pressure from 10 in-h 2 O to 2.5
Force Sensors. FSA Series, Compensated/Amplified. Datasheet
Force Sensors FSA Series, Compensated/Amplified Datasheet DESCRIPTION The FSA Series are piezoresistive-based force sensors offering a ratiometric analog or digital output for reading force over the specified
Data Sheet. Features. General Description. Applications. Single Stage Primary Side Regulation PFC Controller For LED Driver
General Description The is a high performance AC/DC universal input Primary Side Regulation Power Factor Controller for LED driver applications. The device uses Pulse Frequency Modulation (PFM) technology
1A 3-TERMINAL POSITIVE LINEAR REGULATORS General Description. Features. Applications
General Description The series are monolithic integrated circuits designed as fixed-voltage regulators for a wide variety of applications including local, on-card regulation. This series of regulators
LOW POWER QUAD OPERATIONAL AMPLIFIERS AS324/324A. Features
General Description The AS324/324A consist of four independent, high gain and internally frequency compensated operational amplifiers. They are specifically designed to operate from a single power supply.
Preliminary Datasheet. Features. General Description. Applications. Dual 1.1MHz, 800mA Synchronous DC-DC Buck Converter
General Description The contains two independent 1.1MHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converters, each of them is capable of driving a 800mA load with high efficiency,
DIGITAL OUTPUT PRESSURE SENSORS
DIGITAL OUTPUT PRESSURE SENSORS Enhanced Digital Output Sensors PCB version Features H O to 00psi Ranges All Combined Errors Over Temperature Less Than 0.%, Typical Wide -0 to C Compensated Temperature
340kHz, 2A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 2A load with high efficiency, excellent line and load regulation.
3A High Current, Low Dropout Voltage Regulator
SPX29300/01/02/03 3A High Current, Low Dropout Voltage Regulator Adjustable & Fixed Output, Fast Response Time FEATURES Adjustable Output Down To 1.25V 1% Output Accuracy Output Current of 3A Low Dropout
BIPOLAR HALL-EFFECT POSITION SENSORS
General Description The is an integrated Hall-effect latched sensor designed for electronic commutation of brushless DC motor applications. The device includes an on-chip Hall voltage generator for magnetic
AZ386 General Description. Features. Applications
General Description The is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 0 to keep external part count low, but the addition of an external resistor
Thick Film Resistor Networks, Dual-In-Line, Molded DIP
MDP 01,, 05 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING / ELEMENT (1) RANGE NO. OF P 70 C PINS Ω W MDP 14 MDP 16 01 05 01 05 0.2 0.2 Consult factory Consult factory Notes (1) For resistor power ratings
Peak 3A CMOS LDO Regulator with Enable and Power Good. Features. Notebook PSOP-8. Figure 1. Package Type of AP2132A
General Description The series are positive voltage regulator ICs fabricated by CMOS process. The ICs consist of a voltage reference, an error amplifier, a power transistor, a resistor network for setting
340kHz, 3A Synchronous DC-DC Buck Converter. Features
General Description The is a 340kHz fixed frequency, current mode, PWM synchronous buck (step-down) DC-DC converter, capable of driving a 3A load with high efficiency, excellent line and load regulation.
Maxim Integrated Products 1
19-3041; Rev 0 ; 10/03 General Description The MAX3748A evaluation kit (EV Kit) simplifies evaluation of the MAX3748A limiting amplifier. The EV kit allows for quick threshold level selections, provides
LM118/LM218/LM318 Operational Amplifiers
LM118/LM218/LM318 Operational Amplifiers General Description The LM118 series are precision high speed operational amplifiers designed for applications requiring wide bandwidth and high slew rate. They
MPX4115A MPXA4115A SEMICONDUCTOR TECHNICAL DATA. OPERATING OVERVIEW INTEGRATED PRESSURE SENSOR 15 to 115 kpa (2.2 to 16.7 psi) 0.2 to 4.
SEMICONDUCTOR TECHNICAL DATA Order this document by MPX4115A/D The Motorola MPX4115A/MPXA4115A series Manifold Absolute Pressure (MAP) sensor for engine control is designed to sense absolute air pressure.