HIGH SPEED SPINDLES OIL TURBINE DRIVEN
|
|
- Garry Rodger Burns
- 5 years ago
- Views:
Transcription
1 HIGH SPEED SPINDLES OIL TURBINE DRIVEN be driven.
2 2 The Toodle is a new, high speed, turbine-driven spindle. It costs a fraction of competing spindle systems... The Toodle may be driven by through-coolant, oil, or air (mist). It allows for ultra-high rotation speeds, and requires no machine modification. It transforms existing machine centers with standard spindles averaging 8,000 28,000 rpm spindles, into high-speed, state-of-the-art machining centers with rotation speeds of up to 75,000 rpm. This enables the most demanding applications on the same machines with a single set up. - Crush resistant - Extended tool life - Super high precision - Extended main spindle life - Significant savings on your machining costs - No electrical installation - Speed up to 75'000 rpm
3 Technical data sheet 3
4 4 Spindles SPINDLE 0 Item number TB131 Ø 3 mm / 4 mm / 6 mm Oil driven turbine RPM max Spedial adapter for different machines available Please specify the replacement kit and assembly device to the desired dimensions. SPINDLE 90 Item number TB Ø 3 mm / 4 mm / 6 mm Oil driven turbine RPM max Please specify the replacement kit and assembly device to the desired dimensions.
5 Accesories 5 REPLACEMENT KIT PRESSURE DEVICE & GAUGE Item number RK13M3 -> Ø 3mm RK13M4 -> Ø 4mm RK13M6 -> Ø 6mm Item mumber PL25 Ø 3mm, Ø 4mm or Ø 6mm The replacement kit includes 2 bearings and 1 turbine. It is replaced with each new tool (drill or mill). Tool is not included. You need the assembly device for the mounting The device is designed to be used with machine centers to mesure the pressure This value is critical as it is used to calculate the Toodle rotation speeds. The device fits into standard sealed tool holders, with ID 25 mm. ASSEMBLY DEVICES CDF101-AR-3 Item mumber AK13M3 -> Ø 3mm AK13M4 -> Ø 4mm AK13M6 -> Ø 6mm Item number Diameter CDF101-AR-3 Ø 25 mm The Assembly Devices are used to assemble the bearings and turbine into the tool shank. Each diameter is unique and includes a precise ring inside. Do not attempt to use alternative devices as you will damage the bearings and the Toodle will not perform. Coolant Internal & external For using the spindle on the turret of Citizen Cincom M32
6 6 Manual Step #1 Insert the first bearing inside the assembly device, direction does not matter.use the right assembly device per tool shank diameter (3, 4 or 6 mm). Step #2 Insert the turbine inside the assembly device.pay attention to the turbine direction; the big cone heads in first Step #3 Insert the second bearing inside the assembly device. The bearing direction does not matter. Step #4 Insert the tool inside the bridge, starting from the tool shank end. Use the right bridge per tool shank diameter (3, 4 or 6 mm). Step #5 Place the bridge with tool over the device, so the tool tip is placed in through the top bearing. Step #6 Using a press or a vise, push the tool into the device and through the bearings and turbine.
7 Manual 7 Step #7 Press the tool further into the device, leaving 5 mm maximum. Use a press or a vise. Step #8 Carefully pull the tool assembly out of the device. Step #9 Place the tool assembly inside the tool housing. Step #10 Check that the O-Ring is inside the front cover. Step #11 Insert the front cover over the tool and screw it onto the tool housing. Use a 24 mm wrench to tighten the cover.
8 Visit us online : PCM Willen SA Route du Grammont Villeneuve Switzerland Tél. +41 (0) Fax : +41 (0) V_18/06/18
TOOL HOLDERS CITIZEN CINCOM A20.
be driven. TOOL HOLDERS. 2 Presentation be driven. PCM WILLEN SA For over 40 years, PCM Willen SA is one of the world s leading manufacturers of special tool holders for automatic lathes. All our products
More informationTOOL HOLDERS CITIZEN CINCOM L20.
be driven. TOOL HOLDERS. 2 Presentation be driven. PCM WILLEN SA For over 40 years, PCM Willen SA is one of the world s leading manufacturers of special tool holders for automatic lathes. All our products
More informationOperating instructions. Fine boring head Ø3-88 with digital display
Operating instructions Fine boring head Ø3-88 with digital display English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: Lifter-Tru Kit for Ford Windsor & SVO Small Block V8 Page 1 of 5 Kit Contents: 2x End Plates 2x 5/8 Threaded Adjustment Sleeves 1x Front Angle Bracket 2x 5/8 Adjustment Sleeve Spacers * 1x
More informationOperating instructions. Twin cutter boring head Ø mm
Operating instructions Twin cutter boring head Ø23.5-153.0 mm English 1. Basic safety information Before first use, please read the operating instructions carefully. These provide important safety information
More informationBHJ Products, Inc. Parts List & Instructions
Product Name: Lifter-Tru Kit for General Motors LS V8 Page 1 of 5 Kit Contents: 2x End Plates 2x Threaded Adjustment Sleeves 1x Front Angle Bracket 2x M10-1.5 x 65 Hex Head Bolts * 2x Angle Adapter Blocks
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
More informationMachinist s Guide to Toolholder Maintenance
Machinist s Guide to Toolholder Maintenance For Collet & Nut Style Toolholders General Overview Modern CNC machines feature high-capacity tool changers that automatically swap toolholders in and out of
More information2. Connect driver to power source leads. After connections are made, place driver above ceiling. SEE MINIMUM SPACE REQUIREMENTS BELOW.
INSTALLATION INSTRUCTIONS INSTALLATION: 1. Cut proper opening in ceiling. Round: 140mm Ø, Square: 140mm x 140mm 140mm Ø 140mm x 140mm 2. Connect driver to power source leads. After connections are made,
More informationPORTABLE PULL TESTER
2425 West Vineyard Avenue, Escondido, California 92029-222 Phone: (800) 284-4460 Fax: (760) 746-4295 PORTABLE CABLE TERMINAL PULL TESTER AT520CT (Revised July 2003) AT520CT Portable Cable Terminal Pull
More informationE2000 Ultra-high-Speed & Super-Precision
E2 E2 UltrahighSpeed & SuperPrecision www.nakanishiinc.com NAKANISHI INC. 216 PRK333E Ver.2 '16.11.3.I Specifications and design are subject to change without notice. Headquarters Factory 7 Shimohinata,
More informationGiraud Tool Company, Inc.
Motor Upgrade for Gracey Trimmer This package is intended to allow the user to upgrade their Gracey trimmer with a higher rpm motor and convenience features not found in the production offering. This upgrade
More informationPlease be sure to read this manual before using the product.
ANGLE HEAD UNIVERSAL TYPE AGU30 OPERATION MANUAL Please be sure to read this manual before using the product. Consult the separate operation manual for Angle Head also regarding the general handling of
More informationPrecision meets Motion. Manual. Gear hobber Z
. Gear hobber Z 1. Identification 2. Product specification 2.1. Operation and range of applications 2.2. Technical data 2.3. Machine requirements 2.4. Safety 2.5. Secure disposal 3. Operating instructions
More informationHeadquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
More informationCITIZEN K 16 VIP. CNC automatic lathe with bar loader. Year of manufacture 2005
CITIZEN K 16 VIP CNC automatic lathe with bar loader Manufacturer Model CITIZEN K 16 VIP Year of manufacture 2005 Control FANUC 31i - TA Machine number K1216 / 0073 Bar loader FMB minimag 18-3200 / 1305
More informationINSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS
INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. A1-Tools... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
More informationCNC TURNING CENTRES B750 B1250
CNC TURNING CENTRES B750 B1250 Cutting edge technology and unequalled productivity. B750 2-3 Machine configurations The new B750/B1250 series represents the state of the art of multifunction turning centres.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS TM X-10 Type 1F HIGH SECURITY ELECTRONIC LOCK Table of Contents Introduction... 1 Basic Tools and Materials Needed... 1 Lock Parts for Installation... 1 Installation Kit Contents...
More informationDUGARD. Machine Tools Since Dugard 52TT/52TTS Twin Spindle CNC Lathe Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles
DUGARD Machine Tools Since 1939 Double Y axes, Servo Angular Driven Tool, Twin Built-In Spindles www.dugard.com Designed for Precision Part Machining of; One-Hit Machining Automobile, motorcycle and bicycle
More informationw w w. h d o n l i n e s h o p. d e TIMKEN BEARING CONVERSION TOOL GENERAL INSTALLATION -J04672 REV Kit Number Models
-J067 REV. 008-07- GENERAL Kit Number 8-08 Models TIMKEN BEARING CONVERSION TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationDUGARD EAGLE 200HT / 200MC
DUGARD EAGLE 00HT / 00MC Slant Bed, High Precision CNC Lathes EAGLE 00HT 5 Slant Bed Heavy duty cast construction allowing optimum chip clearance Rigid, High Precision Spindle Unit Model Eagle 00HT The
More informationDouble Spindle Double Turret Multi-Tasking Turning Center DT42 DT52. Turning Precision Into Perfection
Double Spindle Double Turret MultiTasking Turning Center Turning Precision Into Perfection Machine Highlights Front Machining VDI 3 12Stations Up to 24 tools 7.5/11 Spindle Power D 55 Through Hole C Back
More informationHardinge FlexC Dead-Length Collet System Style DL 80mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 80mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationQUICK-CHANGE Anfrageformular / QUICK-CHANGE Werkzeugsysteme für Multi-Task und Drehmaschinen
FLEX QUICK-CHANGE Anfrageformular / QUICK-CHANGE Inquiry form QUICK-CHANGE Werkzeugsysteme für Multi-Task und Drehmaschinen QUICK-CHANGE tool system for multi-tasking and turning lathes 4 Quick-Change
More informationSOFTSYNCHRO HIGH PERFORMANCE TAP H O L D E R S
SOFTSYNCHRO HIGH PERFORMANCE TAP H O L D E R S You Know Taps Now take them to the next level Triple your tap life and more with Emuge Softsynchro Tap Holders! E muge is widely recognized in the industry
More informationSHARP STA, STB, STC, STF SERIES CNC big bore flat bed lathe
SHARP STA, STB, STC, STF SERIES PRECISION MACHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, CA 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com Parts: parts@sharp-industries.com
More informationJD-12. Instruction & Parts Manual
JD-12 Instruction & Parts Manual Framon Manufacturing Company, Inc. 909 W Washington Avenue Alpena, MI 49707 Phone: 989-354-5623 Fax: 989-354-4238 E-mail: support@framon.com Website: www.framon.com The
More informationHawk Eye. engineered by SCHÜSSLER.
Hawk Eye R engineered by SHÜSSL www.k-schuessler.de The new precision collet chuck Hawk Eye R engineered by SHÜSSL We are proud to present our new precision collet chuck HAWK EYE. Highly accurate runout
More informationINSTRUCTIONS FOR USE B2 FORM KNURLING TOOL
INSTRUCTIONS FOR USE B2 FORM KNURLING TOOL Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. B2 Tools... 6 2.1 Technical Data... 6 2.2 Overview: Main components... 7
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationHigh Speed Air Turbine Handpiece
OPERATION MANUAL High Speed Air Turbine Handpiece Please read this Operation Manual carefully before use and file for future reference. Handpiece should not be used with friction grip burs exceeding 18.5
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationDUGARD. Machine Tools Since Dugard 300 Slant Bed High Precision CNC Lathe.
DUGARD Machine Tools Since 1939 Dugard 300 Slant Bed High Precision CNC Lathe www.dugard.com Dugard 300 Series Outstanding features that guarantee faster, more accurate turning and lower production costs
More informationHardinge FlexC Dead-Length Collet System Style DL 42mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 42mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
More informationBML-SERIES LATHES RISE TO WIN YIDA PRECISION MACHINERY CO., LTD.
YIDA PRECISION MACHINERY CO., LTD. No. 41, Alley 68, Lane 357, Sec. 1, Sinan Rd., Wuri Dist., Taichung City 41465, Taiwan Tel : 886-4-2335 8368 Fax: 886-4-2335 6681 E-mail: yida.cnc@msa.hinet.net http://www.yidacnc.com
More informationSPOT WELD CUTTER SHARPENER
670 New York Street Tel: 800.261.7976 Memphis, TN 38104 Fax: 901.274.8816 www.chemicar.com sales@chemicar.com SPOT WELD CUTTER SHARPENER OPERATING MANUAL CONTENTS WARNINGS 2 OPERATING INSTRUCTIONS 3 REPLACING
More informationSAMSUNG Machine Tools
NC Unit Specifications / FANUC Series Item Specification 0i-TD 32i-B i SAMSUNG Machine Tools PL 2000Y/SY PL 2500Y/SY SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea
More informationAdjustable Center Crossheads Operations Manual
Plastic Extrusion Tooling Specialists ph: 800.272.8878 Adjustable Center Crossheads Operations Manual BH25, BH30, BH75, BH225, BH250 & BH750 B&H TOOL COMPANY FIRST IN EXTRUSION TOOLING Dear Customer, Thank
More informationAssembly Instructions
P/N 8650/8655 Assembly Instructions NOTE: Your Sherline CNC Cam Grinder is double boxed and secured to a wooden shipping frame. Upon delivery, check the outer box for damage. If the box is damaged, take
More informationA very warm welcome (Arial, 24-point bold font) Discover what's under the surface (Arial, 20-point bold font in italics)
A very warm welcome (Arial, 24-point bold font) Discover what's under the surface (Arial, 20-point bold font in italics) HORN Technology Days 2015 Longitudinal turning Flexibly producing complex turned
More informationOTECO INC. MODEL ,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL
Page 1 of 7 OTECO INC. MODEL 45 4 5,000 PSI 4-1/16 PORT DM GATE VALVE MAINTENANCE MANUAL Page 2 of 7 TABLE OF CONTENTS 1. Assembly Blowout 2. Repair Kit Contents & Technical Specifications 3. Disassembly
More informationMODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS
MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Designed to work exclusively with the
More informationTechniks Certified Face Mill Arbors
Techniks Certified Face Mill Arbors Manufactured from H13 tool steel for performance and long life. Extended Length Face Mill Arbors CAT40, CAT50 now up to 12" gauge lengths H6 arbor tolerance reduces
More informationReplacing the Reciprocator on an SWF Multi-head.
Replacing the Reciprocator on an SWF Multi-head. Follow the instructions below to replace the reciprocator in the SWF multi-head machines. The tools required are found in the tool kit that came with the
More informationCNC TURNING CENTRES B1200-M-Y
CNC TURNING CENTRES B1200-M-Y Great versatility and superb chip removal. B1200 2-3 The family of BIGLIA B1200 lathes universally appreciated for their rigidity, accuracy and durability, has been designed
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationDisassembly Instructions - 1 hp. Planetary Reduction Gears
Disassembly Instructions - 1 hp. Planetary Reduction Gears Important: Use these instructions along with the tool parts page or manual. Notice: To avoid damage to the motor housing, use the Special Repair
More informationInternal Rotary/Punch Broaches & Plugs Adjustable & Non Adjustable Rotary Holders
CAT_BROOTSEN_2008-08_EN_hassay savage_fabrieks-catalogus AMTC BV - importeur Nederland pagina 14 van 40 uscatalogv7.qxp 8/13/2008 10:57 AM Page 14 Internal Rotary/Punch Broaches & Plugs Adjustable & Non
More informationIndexable Center Drill
i-center indexable center drill (patent pending) First Indexable center drill in the world. Shortens set up time and center drilling time. Increases tool life which reduces tooling cost. Special forms
More informationROTARY HAMMER OWNER S MANUAL
ROTARY HAMMER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationOPERATIONAL AND MAINTENANCE MANUAL. Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE
MOD 14-02 OPERATIONAL AND MAINTENANCE MANUAL Rev. 0 Data 01/02/2012 Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE TABLE OF CONTENTS TECHNICAL SPECIFICATIONS 2 USE 4 MAINTENANCE
More informationGMS SERIES. Maximum Performance Multi-axis Turning Centers
GMS SERIES Maximum Performance Multi-axis Turning Centers MAXIMUM PERFORMANCE MULTI-AXIS TURNING CENTERS With 30 years of knowledge and experience in the machine tools field, Goodway is proud to present
More informationPSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
More information.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete
Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works
More informationSeries. 150,000 min -1 (0.5MPa) 25W. High Speed 150,000min -1 Suitable for Small Diameter Milling AIR TURBINE SPINDLE. Max. Max.
AIR TURBINE SPINDLE Series Max. 150,000 min -1 High Speed Suitable for Small Diameter Milling Large Variety of Tapers Available SHANK M2040 (Straight), BT30 / 40 / 50 HSK E25 / 32 / 40 / 50 HSK A63 / F63
More informationInstallation Instructions TK-2/3 and TKS-2/3
Installation Instructions TK-2/3 and TKS-2/3 The Trem King TKS-2 is designed to fit tele style guitars with a slanted bridge pickup mounted in the bridge plate. The TKS-2 has a Modern tele bridge footprint.
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationPROFESSIONAL FLARING TOOL 001ERL 37 & ERL 37
PROFESSIONAL FLARING TOOL 001ERL 37 & 45 002ERL 37 001ERL shown here OWNER S MANUAL 199R11215 EDUCATIONAL TIPS Make sure the end of the tube is cut off square. Before flaring, make sure the die clamp is
More informationPressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit
Shower Only PL8900-00 & TR-SH Pressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit - Installation Instructions Before Your Installation Read
More informationTo remove sanding pad, turn counterclockwise.
Disassembly Instructions - Dynorbital EXTREME Models: All Important: Disconnect sander from the air supply. Notice: Use these instructions along with the tool manual. To avoid damage, use the special repair
More informationCOLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
More informationPneumatic Drill / / Technical Specification
CS UNITEC Pneumatic Drill 2 2502 0010 / 2 2502 0030 2 2506 0010 / 2 2506 0030 Technical Specification Model with Lever Throttle Model with Twist Throttle with Selfresetting 2 2502 0010 2 2502 0030 2 2506
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationDUGARD. DUGARD Machine. Dugard 300 Slant Bed High Precision CNC Lathe. Machine Tools That Create Solutions Since Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard 300 Slant Bed High Precision CNC Lathe DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Outstanding features that guarantee
More informationProject #76: Self-Centering Motor Housing Design Proposal
CONSULTEK CONSULTING FOR PLASTICS INDUSTRY www.consultekusa.com www.theplasticsconsultant.com VISHU SHAH TEL : 714-674-1981 460-D West Lambert Road FAX : 714-674-1981 Brea, CA 92821 vishu@consultekusa.com
More informationl6c Collet Block for Light to Medium Duty Mills General Requirements and Operating Conditions
l6c Collet Block for Light to Medium Duty Mills General Requirements and Operating Conditions 50-100 PSI air pressure required (recommend 85 PSI - filtered & lubricated). 11 / 16" (17.46mm) keys used on
More informationCHAMFERING RINGS UPDATED. Ring Diameters: 1.34, 1.50, 1.65 and Fits Body Diameters: 10.0mm(.3937") mm(1.000")
Ring Diameters: 1.34, 1.50, 1.65 and 1.85 Fits Body Diameters: 10.0mm(.3937") - 25.4mm(1.000") L:D Ratios: Gold Twist 3xD, 5xD, 8xD & 12xD Quad Twist & Quad Drill+ 3xD, 4xD & 5xD Maximum Chamfer DOC:.118"
More informationTrem King Style-1 Retro Fit Installation Instructions
Trem King Style-1 Retro Fit Installation Instructions The Trem King Model TKS/TK- 1 is designed to fit into guitars previously fit with vintage 6- screw or two- post type vibrato systems. The following
More informationBudget Robotics Octabot Assembly Instructions
Budget Robotics Octabot Assembly Instructions The Budget Robotics Octabot kit is a low-cost 7" diameter servo-driven robot base, ready for expansion. Assembly is simple, and takes less than 15 minutes.
More informationFCL-140/A FCL-200/S/HT/MC FCL-300/P/MC. Linear Way Series CNC Lathes
FCL0/A FCL0/S/HT/MC FCL0/P/MC Linear Way Series CNC Lathes Linear Way Series CNC Lathes FCL0/A FCL0/S/HT/MC FCL0/P/MC Contents 0 Controller 03 FCL0/A Series Construction & Spindle Torque 0 FCL0 System
More informationTechnical T-A & GEN2 T-A GEN3SYS APX. Revolution & Core Drill. ASC 320 Solid Carbide. AccuPort 432. Page CONTENTS. Set-up Instructions 256
Technical ASC 0 Solid Carbide CONTENTS Page Set-up Instructions 6 AccuPort 4 Recommended Speeds & Feeds 60 Guaranteed Application Request Form 99 +44 (0)84 400 900 +44 (0)84 400 0 enquiries@alliedmaxcut.com
More informationSAMSUNG Machine Tools PL2000SY CNC TURNING CENTER
SAMSUNG Machine Tools CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 30 degree slant bed
More informationTrem King Style-1 Retro Fit Installation Instructions
Trem King Style-1 Retro Fit Installation Instructions The Trem King Model TKS/TK-1 is designed to fit into guitars previously fit with vintage 6- screw or two-post type vibrato systems. The following instructions
More informationHIGH PERFORMANCE MILL-TURN MULTI-TASKING CENTER
HIGH PERFORMANCE MILL-TURN MULTI-TASKING CENTER ADVANCED HIGH PERFORMANCE HIGH H PRECISION MILL-TURN MULTI-TASKING M TASKINT CENTERC Integrated Main and Sub Spindle Design The built-in spindle design alleviates
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationIENG 475 Computer-Controlled Manufacturing Systems 2/7/2017. Lab 03: Manual Milling and Turning Operations
I. Purpose Lab 03: Manual Milling and Turning Operations A.) B.) C.) D.) Provide an overview of safety considerations for the CNC Mill Provide manual experience using the laboratory s CNC Mill Provide
More informationV-Turn 410/ PRECISION LATHE
PRECISION LATHE Page 2. Highlights Page 3. Machine construction and feed system Page 3. Main spindle drive Page 4. Toolpost Page 4. Tailstock and auxiliary systems Page 5. 3 Axis Digital Read Out - X.pos
More informationReady To Go SimpleSpec tm. Installation Manual. For more information, please visit 3-form.com or call
Contents Overview ( 1) 3/8" Varia Panel = Cable Tensioner with Cover Plate KIT Stainless Steel: 3-15-1636-K Black Oxide: 3-15-2005-K Cable Tensioner with Cover Plate SS: 3-15-1636 BO: 3-15-2005 + M8 Thread
More informationBSF. Large Ratio Automatic Back Counterboring & Spotfacing Tool
BSF Large Ratio Automatic Back Counterboring & Spotfacing Tool Counterbores up to 2.3xd Replaceable carbide coated blades for extended life Very simple to use Suitable for CNC machines with through coolant
More informationVario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.
124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out
More informationAR-15 Armorer s Essentials Kit. Product # Instructions # Revision: B
AR-15 Armorer s Essentials Kit Product #156111 Instructions #1025769 Revision: B 1 INDEX 3 AR-15 Adjustable Receiver Link 3 Pivot Pin and Roll Pin Installation Tool 4 Mag well Vise Block 7 Upper Vise Block
More informationSALICE AIR TEMPLATE KIT
SALICE AIR TEMPLATE KIT There are two separate templates available for the machining of the AIR hinge; one is used for machining both the top and bottom of the door while the other is used for machining
More informationJuly 2018 ONLY FOR. LB45III M-Turret. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LB45III M-Turret www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
More informationHC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
More informationGet to know drilling. Module 6
Get to know drilling Module 6 Warm Up Activity on Module 5 Team A vs. Team B Lets play Jeopardy!! Objectives 1. Describe the operation of a drill press. 2. Identify the drill press parts. 3. Identify the
More informationBDV/DV SHANK DUAL CONTACT. BDV/DV Shank
R DV/DV S P I N D E S Y S T E M DUA CONTACT DV/DV Shank DUA CONTACT DV/DV For High Speeds MEGA MICRO CHUCK PAT. Clamping diameter: ø0.45 - ø8.05 Ultra-slim design with world's smallest ø10 nut outer diameter.
More informationAxial Movement. Tailstock 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC CHUCKING SYSTEM EXTRA WIDE Z AXIS DESIGN OF 620MM
STANDARD FEATURES FANUC TXP-100FA CONTROL Spindle Features Body Structure POWERFUL 49 HP SPINDLE MOTOR RIGID 45 DEGREE SLANT BED 2,000 RPM MAXIMUM SPINDLE SPEED AUTOMATIC LUBRICATION SYSTEM 15 HYDRAULIC
More informationOperating Manual Riveting Tool R1. For installing blind rivet nuts
L Operating Manual Riveting Tool R1 For installing blind rivet nuts Table of contents 1. Introduction 1.1 General instructions... 2 1.2 Description of the riveting tool... 3 1.3 Safety instructions...
More informationDUGARD. DUGARD Machine. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. Machine Tools That Create Solutions Since 1939.
DUGARD Machine ools hat Create Solutions Since 1939 Dugard 00H / 00MC Slant Bed, High recision CNC Lathes DUGARD Machine ools www.dugard.com sales@dugard.com 0173 73 DUGARD 00H/00MC CNC Lathes Hydraulic
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationKTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationINSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS
INSTRUCTIONS FOR USE LA, MAMMUT & STR KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. LA-Tool... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...
More informationCADET Line Boring Machine And Accessories Catalogue
CADET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 CADET Line Boring Machine This general use line boring machine is perfect for contractors who are concerned
More informationServoturn 410. Servoturn 410. Lathe. Conventional Precision Lathe with servo drive.
Lathe Conventional Precision Lathe with servo drive easy to operate, more reliable, more precise, for higher loads and reduced maintenance Mineral-Casting Machine Frame preloaded ball screws electronic
More informationGMR 1 PROFESSIONAL. ÁU~²Ýœ ÈULM¼« Àπ ß Õ ŸË Õ Èß π Petunjuk-Petunjuk untuk Penggunaan HıÎng dõn s dùng Instructions d emploi. Operating Instructions
609 40 44 - Buch Seite Dienstag,. Juni 004 :5 5 GMR PROFESSIONAL * Des idées en action. Operating Instructions Àπ ß Õ ŸË Õ Èß π Petunjuk-Petunjuk untuk Penggunaan HıÎng dõn s dùng Instructions d emploi
More information