Radio Sensortelemetry

Transcription

1 adio Sensortelemetry * S hort des cription of radio telemetry page * otating part to stationary part page * P oint to point page 11 * Antenna divers ity page 12 * Multi channel telemetry page * MC page * adio telemetry components page M MAE A Sensortelemetrie Partenaire en France FGP Sensors & Instrumentation - ZI - 24 rue des Dames LES CLAYES SOUS BOIS Tél. : Fax. : scom@fgp.tm.fr - File:...\Funk_Katalog.cdr //

2 Short Description of Manner adio-sensortelemetry The Manner adio Telemetry was special developed for working in heavy environment conditions. The consists of radio transmitter and miniaturized Sensor Signal Amplifier. Strain gage brigdes and thermocouples, TD (PT100) are direct interfaced with the Sensor Signal Amplifier. The signal from the transducer will be enforced, filtered due to the Antialaising and digitized. The resolution of the signal can be 12 Bit or 16 Bit (option). The digital data will then be coded and a special checksum word will be generated. This special checksum word garantees absolut noisefree data transmission. The data word and special checksum word will be FM-modulated of the F carrier 433/868 MHz. The garanties wireless transmitting over about 50 meters in free aera. The system is available in single an multi channel version (2, 4, 8, 16 channels). For every channel exists a seperate power supply, amplifier, AD-Converter and DA-Converter. There no crosstalk between the channels and no backslash in case a short circuit. The range adjustment, auto zero can be programmed electrically remote by a PC. Diagramm of one channel + - UB Ud GD + - ~ AD- Transmitter Data Converter Decoder DA- Converterr Cod. eceiver 12/16 Bit protection 12/16 Bit Filter Transmitter with direct transducer interface ange CC Digital Interface 0to±10 USB S 232 M MAE A Sensortelemetrie -Page 2-

3 Position (differential transformer) Configuration Contactless distance ( transducer) Hal sensor S 90 to 270 AC (9 to 36 DC) Strain gage half brigde emote Control (option) Strain gage full brigde Thermocouple Sensor Signal Amplifier eceiver 0 to ±10 PT100 TD PT100 Piezo electric emote Cal M MAE A Sensortelemetrie -Page 3-

4 Transmitter Band clamp MAE adio Sensortelemetry (shaft - stationary) Antenna Shaft Shaft M MAE A Sensortelemetrie Type: S_4_ <bandwidth>_<accuracy>_<temp>_<mod>_f eceiver Type: AW_T_<bandwidth>_<channels>_<supply>_<output>_<mod>_F Features: Easy mounting with Accu-supply 3,6 Lithium, max 35 hours (one cycle) Channel count: max. 16 Samplerate: 4000 Sample/s (1 channel) Samplerate: 1100 Sample/s /channel at 8 channels Digital transmitting: 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 50 m in open field Integrated data protection by checksum 16 Bit CC Low current consumption by low power C-MOS technique: 3,6 supply Integrated transducer amplifier range: 0,1 m/ to 20 m/ ange adjustable by solderable resistors or optional electrical remote programmable range with 12 Bit resolution Transducer: Strain gage, full- / half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Optional inductive supply Max. accelaration: 1500 g Optional -40 to +120 C environmental temperature -Page 4-

5 Transmitter Band clamp MAE adio Sensortelemetry (shaft - stationary) Shaft Type: S_4_ <bandwidth>_<accuracy>_<temp>_<mod>_f Shaft Features: Easy mounting with Accu-supply 3,6 Lithium, max 35 hours (one cycle) Channel count: 1 Samplerate: 4000 Sample/s (1 channel) Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 50 m in open field Integrated data protection by checksum 16 Bit CC Low current consumption by low power C-MOS technique: 3,6 supply Integrated transducer amplifier range: 0,1 m/ to 20 m/ ange adjustable by solderable resistor or optional electrical remote programmable range with 12 Bit resolution Transducer: Strain gage, full- / half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Optional inductive supply Max. accelaration: 1500 g Temperature range: -10 to +85 C Optional -40 to +120 C environmental temperature M MAE A Sensortelemetrie Type: AW_M_<bandwidth>_<supply>_ <output>_<mod>_f -Page 5-

6 Torque Meter based on adio Telemetry Type: AW_M_<bandwidth>_<supply>_ <output>_<mod>_f M MAE A Sensortelemetrie Type: MF_ <range>_<bandwidth>_<precision>_<mod> _F Further information: see Meßflansch Features: Universal torque meter for short term use anges available: 10 m to 50 km Linearity and hysteresis: 0,2 % High bandwidth 0 to 1 khz(-3 db) High reliable digital transmitting 16 Bit resolution Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Easy mounting Transmitting: adio f = 433/868 MHz F-Power: 10 mw; range: 40 m in open field Integrated data protection by checksum (16 Bit CC) Low current consumption by low power C-MOS technique: 3,6 supply with Accu-supply 3,6 Lithium, max 35 hours (one cycle) Max. radial accelaration: 1500 g Temperature range: -10 to +85 C Optional -40 to +120 C environmental temperature Supply receiver: 9 to 36 DC, 100 ma Output voltage: 0 to ±10, 0(4) to 20 ma, USB Type system: type: MF_ <range>_<precision>_<bandwidth>_<mod>_<aw> _F 10 m 0,25% 10 Hz PCM12 AW_M to 100 Hz PCM16 AW_T 50 km 0,1% 1 khz -Page 6-

7 Climate Compressor Torque Meter based on adio Telemetry Type: M MAE A Sensortelemetrie MFC_ <range>_<precision>_<bandwidth>_<mod> _F Features: Type: AW_M_<bandwidth>_<supply>_ <output>_<mod>_f Climate compressor torque meter for short term use anges available: 20 m to 50 km Linearity and hysteresis: 0,25 % High bandwidth 0 to 1 khz(-3 db) High reliable digital transmitting 16 Bit resolution Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Easy mounting Transmitting: adio f = 433/868 MHz F-Power: 10 mw; range: 40 m in open field Integrated data protection by checksum (16 Bit CC) Low current consumption by low power C-MOS technique: 3,6 supply with Accu-supply 3,6 Lithium, max 25 hours (one cycle) Max. radial accelaration: 1500 g Temperature range: -10 to +85 C Optional -40 to +120 C environmental temperature Supply receiver: 9 to 36 DC, 100 ma Output voltage: 0 to ±10, 0(4) to 20 ma, USB Type system: type: MFC_ <range>_<precision>_<bandwidth>_<mod>_<aw> _F 20 m 0,25% 10 Hz PCM16 AW_M to 100 Hz 50 m 1 khz -Page 7-

8 Wheel Torque Meter based on adio Telemetry Type: M MAE A Sensortelemetrie MFW_ <range>_<precision>_<bandwidth>_<mod> _F Features: Type: AW_M_<bandwidth>_<supply>_ <output>_<mod>_f Wheel torque meter for cars anges available: 500 m to 4 km Linearity and hysteresis: 0,1 % Based on titanium with overload protection High bandwidth 0 to 1 khz(-3 db) High reliable digital transmitting 16 Bit resolution Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Easy mounting Transmitting: adio f = 433/868 MHz, 16 different frequencies Integrated transmitting antenna, waterproof F-Power: 10 mw; range: 20 m in open field Integrated data protection by checksum (16 Bit CC) Low current consumption by low power C-MOS technique: 3,6 supply with Accu-supply 3,6 Lithium, max 35 hours (one cycle) Max. radial accelaration: 1500 g Temperature range: -25 to +85 C Optional -40 to +120 C environmental temperature Supply receiver: 9 to 36 DC, 100 ma Output voltage: 0 to ±10, 0(4) to 20 ma, USB, CA-Bus Type system: type: MFW_ <range>_<precision>_<bandwidth>_<mod>_<aw> _F 500 m 0,1% 100 Hz PCM16 AW_M to 1 khz 4 km -Page 8-

9 Multichannel transmitter with integrated strain gage amplifier (with Accu) Wheel adio Telemetry with CA-Bus Interface or M MAE A Sensortelemetrie Interface- Box erstärkung fein ullpunkt supply DC output: 0..+/-10 receiver CA - Bus Features: Easy mounting with Accu-supply 3,6 Lithium, max 35 hours (one cycle) Channel count: 1 or multi channel (max. 16) Samplerate: 4000 Sample/s 1 channel) Samplerate: 1100 Sample/s /channel at 8 channels Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 30 m in open field Low current consumption by low power C-MOS technique: 3,6 supply Integrated transducer amplifier range: 0,1 m/ to 20 m/ ange adjustable by solderable resistors or optional electrical remote programmable range with 12 Bit resolution Transducer: strain gage, full- / half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Optional inductive supply Max. accelaration: 1500 g Optional -40 to +120 C environmental temperature -Page 9-

10 Dimensions Optional flange adial connetors Type Lemo or PG-screws adial connetors Type Lemo or PG-screws Charging cap 32,5 Ø80,0 Ø56,0 Ø81,0 110 Option central Sensor connector Lemo 1,5 20,5 21,0 Supply 12 Connector Lemo Transduce with transmitter eceiver 0 to ±10 S232, USB M MAE A Sensortelemetrie -Page 10-

11 eceiver MAE adio Sensortelemetry (point to point) Antenna Type: AW_T_<bandwidth>_<channels>_<supply>_<output>_<mod>_F up to 50 m Type: MS <channels>_<bandwidth> _<accuracy>_<temp>_<mod>_f M MAE A Sensortelemetrie Strain gage Transmitter PT100 Features: Easy mounting with Accu-supply 3,6 Lithium, max 35 hours (one cycle) Channel count: max. 16 Samplerate: 4000 Sample/s 1 channel) Samplerate: 1100 Sample/s /channel at 8 channels Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 50 m in open field Integrated data protection by checksum 16 Bit CC Low current consumption by low power C-MOS technique: 3,6 supply Integrated transducer amplifier range: 0,1 m/ to 20 m/ ange adjustable by solderable resistors or optional electrical remote programmable range with 12 Bit resolution Transducer: Strain gage, full- / half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Optional inductive supply Max. accelaration: 1500 g Pressure Optional -40 to C environmental temperature -Page 11-

12 MAE adio Sensortelemetry special for Train Application with Antenna Diversity Stator antennas M A PCM- Sensortelemetrie PCM- Sensortelemetrie M A M A M A M A Features: Easy mounting with Accu-supply 3,6 Lithium, Max 35 hours (one cycle) Channel count: 16 (max. 32) Samplerate: 4000 Sample/s 1 channel) Samplerate: 750 Sample/s at 16 ch. Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 30 m integrated Data protection Antenna diversity for improved reception by checksum 16 Bit CC Low current consumption by low power C-MOS technique: 3,6 supply Integrated transducer amplifier range: 0,1 m/ to 20 m/ Electrical remote programmable range with 12 Bit resolution Transducer: Strain gage, full- /, half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C Optional inductive supply Max. accelaration: 1500 g Temperature -40 to +85 C M MAE A Sensortelemetrie -Page 12-

13 Multi Channel adio Sensortelemetry (separate frequencies) Sensor with transmitter Transmitter with integrated signal amplifier 1 Plugin cards Multi channel receiver M MAE A Sensortelemetrie Sensor with Transmitter Transmitter with integrated signal amplifier Sensor with Transmitter Transmitter with integrated signal amplifier Type: S_4_ <bandwidth>_<accuracy>_<temp>_<mod>_f 2 16 Signal output 0to±10 Features: Supply 90 to 270 AC Easy handling with Accu-supply 3,6 Lithium, max 35 hours (one cycle) Channel count: 1 to 16 (every channel has its own frequency) Samplerate: 4000 Sample/s (1 channel) Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 50 m in open field Integrated data protection by checksum 16 Bit CC Low current consumption by low power C-MOS technique: Type: AW_ES_ <bandwidth>_<supply> _<output>_<mod>_f 3,6 supply Integrated transducer amplifier range: 0,1 m/ to 20 m/ ange adjustable by solderable resistors or optional electrical remote programmable range with 12 Bit resolution Transducer: Strain gage, full- / half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Optional inductive supply Max. accelaration: 1500 g Temperature range: -10 to +85 C Optional -40 to +120 C environmental temperature -Page 13-

14 Multi Channel adio Sensortelemetry (separate frequencies, point to point) Sensor with transmitter or Transmitter with integrated signal amplifier Sensor with transmitter Transmitter with integrated signal amplifier Sensor with transmitter Transmitter with integrated signal amplifier Sensor with transmitter Transmitter with integrated signal amplifier eceiver eceiver eceiver eceiver 0 to ±10 S232, USB 0 to ±10 S232, USB 0 to ±10 S232, USB 0 to ±10 S232, USB Type: S_4_ <bandwidth>_<accuracy> _<temp>_<mod>_f Type: S_8_ <bandwidth>_<accuracy> _<temp>_<mod>_f Features: Easy handling Channel count: 1 (16 different frequencies) Samplerate: 4000 Sample/s (1 channel) Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 50 m in open field Integrated data protection by checksum 16 Bit CC Low current consumption by low power C-MOS technique: 3,6 supply Integrated transducer amplifier range: 0,1 m/ to 20 m/ ange adjustable by solderable resistors or optional electrical remote programmable range with 12 Bit resolution Transducer: Strain gage, full- / half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Max. accelaration: 1500 g Temperature range: -10 to +85 C Optional -40 to +120 C environmental temperature with Accu-supply 3,6 Lithium, max 35 hours (one cycle) type: AW_M_<bandwidth>_<supply>_ <output>_<mod>_f M MAE A Sensortelemetrie -Page 14-

15 Multi Channel adio Sensortelemetry (multiplex mode, one frequency, multi point to point, low speed application) Sensor with transmitter 9to36DC Transmitter with integrated signal amplifier 1 eceiver 0 to ±10 CA, USB M MAE A Sensortelemetrie Sensor with transmitter Transmitter with integrated signal amplifier Sensor with transmitter Transmitter with integrated signal amplifier Sensor with transmitter Transmitter with integrated signal amplifier Type: S_8_ <bandwidth>_ <accuracy>_<temp>_<mod>_f Features: Type: AW_M_<bandwidth>_<supply>_ <output>_<mod>_f Easy handling Multichannel (time multiplex) Channel count (max): 8 (16 different frequencies) Samplerate: 10 Sample/s/channel Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 50 m in open field Integrated data protection by checksum 16 Bit CC Integrated transducer amplifier range: 0,1 m/ to 20 m/ ange adjustable by solderable resistors or optional electrical remote programmable range with 12 Bit resolution Transducer: Strain gage, full- / half bridge, Thermocouple type K Zerodrift / Gaindrift: 0,01 %/ C (0,003 %/ C optional) Max. accelaration: 1500 g Temperature range: -10 to +85 C Optional -40 to +120 C environmental temperature Low power mode, low power C-MOS technique: 3,6 supply with Accu-supply 3,6 Lithium, max 150 hours (one cycle) -Page 15-

16 Option adio Sensortelemetry with Antenna Diversity (improvement of the security of data transmitting by use of 2 antennas) Antenna 1 Antenna2 Shaft eceiver Features: Impovement of reception by 1000 times in case interferences 2 receiver system with 2 antennas Diversity combiner chooses at every time the best signal Avoiding of lost of sensor data in case of bad reception or interferences Digital transmitting 12/16 Bit resolution with checksum (CC) Transmitting: adio f = 433/868 MHz, 16 different frequencies F-Power: 10 mw; range: 50 m in open field Integrated data protection by checksum 16 Bit CC Special for big shafts Special for train application Special for hard environment M MAE A Sensortelemetrie -Page 16-

17 Option MC Sensortelemetry For initial remote setup of the of strain gage application at installation Only for inital setup eceiver Zero point Gain Interface- Box USB - Bus Supply 9 to 36 DC Output: 0 to ±10 Laptop Auto zero, Adjusting tolerances in zero point Adjusting tolerances in gain emote online re-conditioning without opening of the amplifier Torque display m Gain adjustment Strain µm/m Zero adjustment Datei Info ullpunkt % [ ] Absolut[ ] -2,58 m/...+2,58 m/ Meßbereich M/ [0...12,64] M/ Absolut[ ] max...+min Status Transmit/eceive Zusatzfunktionen Werte erneut senden Übertragung Initialisieren Exit M MAE A Sensortelemetrie M MAE A Sensortelemetrie -Page 17-

18 How does MC Sensortelemetry work? Transducer cal Cal Amplifier Amplifier Zero, Offset Gain, ange Type of sensor emote shunt calibration Amplifier 1 Amplifier 2 Offset 16 Bit resolution Logic with EEProm Gain 16 Bit resolution Power suppy A/D-Converter Modulator/ Demodulator Logic MC Sensor Signal Amplifier otating emote MC Data Inductive coupling frequency = 13,56 MHz Digitized sensor signal Energie emote shunt calibration ange, gain, zero, offset Datei Info Zero/Offset -100 Gain/ange F generator Modulator/ Demodulator/ D/A-Converter Logic up µp eceiver Stationary Cal. USB Output signal 0 to ±10 Laptop, PDA The control data for gain and zero will be online transferred via the telemetry channel Status M/ Transmit/eceive Initiale % [ ] Absolute[ ] -2,58 m/...+2,58 m/ M/ [0...10] Absolute[ ] max...+min Exit M MAE A Sensortelemetrie Laptop Features: * emote high resolution adjustment (16 Bit) of gain, range ( 0,05 to 10 m/) * Auto zero * emote high resolution adjustment (16 Bit) of zero, offset (±500% from the adjusted range) * Digitizing of sensor signal with 16 Bit resolution inside the sensor signal amplifier * Integrated sensor signal amplifier for direct interface of strain gage: Standard: strain gage, PT100 Option: Thermocouple, piezo electric, ICP, LDT * emote shunt calibration (option) * Integrated power supply for transducer and amplifier * ery small zero/gain drift: 0,003 %/ C * ery good linearity: <0,003 % * Environment temperature: -25 to +125 C (-45 to +120 C option) * Protektion: IP67 * Integrated speed sensor (option) * Serial interface USB, direct control of gain and auto zero by Laptop, PDA M MAE A Sensortelemetrie -Page 18-

19 adio-sensortelemetry Components M MAE A Sensortelemetrie -Page 19-

20 Sensor Signal Amplifier Type 2 End of shaft 4xØ4,5 Ø5,0 M MAE A Sensortelemetrie ,0 6,0 50,0 - + UB I+ I- Ud v1 Cal G or v2 GD 42,0 32,0 1 Channel adio Sensortelemetry transmitter For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth (10 Hz /0 Hz to 1 khz Brigde supply: 3 Strain gage: 350 Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Supply: 3,3 to 12, 50 ma emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Max load: g (depends on fixing) Type: S_2_<bandwidth>_<accuracy>_<temp>_<mod>_F 1 khz 0,02 85 PCM12 0, PCM16 0,005 -Page 20-

21 Sensor Signal Amplifier Type 3C 3 GD v1 Tk HF 7,0 18,0 6,0 9,0 9,0 8,0 I- I+ 5,8 Weight: about 12g v2 HF-GD 76, ,0 18 M MAE A Sensortelemetrie UB I+ I- Ud GD v2 G or v1 1 Channel adio Sensortelemetry transmitter For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth (10 Hz /0 Hz to 1 khz Brigde supply: 3 Strain gage: 350 Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Supply: 3,3 to 12, 50 ma emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Max load: g (depends on fixing) Type: S_3c_<bandwidth>_<accuracy>_<temp>_<mod>_F 1 khz 0,02 85 PCM12 0, PCM16 0,005 -Page 21-

22 Sensor Signal Amplifier Type 4B 9,0 3,1 3,3 23,5 47,0 1,5 Weight: about 12g Type: S4b_Funk_16Bit Ø2,6 30,0 25,0 20,0 M MAE A Sensortelemetrie Ø2,6 3,6 3,3 3,3 3,3 UB I+ I- Ud v1 Cal G or v2 GD 3,6 1 Channel adio Sensortelemetry transmitter For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth 10 Hz /0 Hz to 1 khz Brigde supply: 3 Strain gage: 350 Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Supply: 3,3 to 12, 50 ma emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Max load: g (depends on fixing) Type: S_4b_<bandwidth>_<accuracy>_<temp>_<mod>_F 1 khz 0,02 85 PCM12 0, PCM16 0,005 -Page 22-

23 Sensor Signal Amplifier Type 5d 5xM3 depth: 4 mm Lemo socket: HG CLLS Magnet for remote shunt calibration Ø80,0 Ø56,0 Ø81,0 Ø63,1 1,5 M MAE A Sensortelemetrie 20,5 21, Connector for remote control UB I+ I- Ud v1 Cal G or v2 GD 1 Channel adio Sensortelemetry transmitter for wheels or end shaft applications For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth 10 Hz /0 Hz to 1 khz Brigde supply: 3, Accu rechargeable Strain gages: 350 Transmission: adio Sensortelemetry PCM Diameter: 80 mm, height: 43 mm esolution: 12 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) echarging by inductive recharging cap (contactless) Operating time between recharging: 30 hours Activating by switch emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Protection: IP67 Max load: g (depends on fixing) Type: S_5d_<bandwidth>_<accuracy>_<temp>_<mod>_F 1 khz 0,02 85 PCM12 0, PCM16 0,005 -Page 23-

24 Sensor Signal Amplifier Type 8 UB 45,0 + - I+ I- Ud 24,0 18,0 50,0 15,0 Housing BOPLA A100 22,5 30,0 - + GD v2 G or v1 30,0 M MAE A Sensortelemetrie UB I+ Cal I- GD HF1 5,8v2v1 Tk HF HF2 GD HFHF1HF2n.c. GD Messp. Kal UB CalGDTest I- I+ Tk M Strain Gage Bridge Strain Gage Bridge Thermocouple PT100 HF GD HF1 HF2 HF1 HF HF2 GD v1v2 v1v2 I GD I+ Tk I+Mess. GD GD 1 Channel adio Sensortelemetry transmitter For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth 10 Hz /0 Hz to 1 khz Brigde supply: 3 Strain gages: 350 Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Supply: 3,3 to 12, 50 ma emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Max load: g (depends on fixing) Type: S_8_<bandwidth>_<accuracy>_<temp>_<mod>_F 1 khz 0,02 85 PCM12 0, PCM16 0,005 -Page 24-

25 Sensor Signal Amplifier Type 9 M3 Inbus Through hole Ø = 7mm for weight reduction Inner diameter: 17 to 50mm Outer diameter = Inner diameter + 20mm Øinner Øouter M MAE A Sensortelemetrie UB I+ I- Ud GD v2 G or v1 1 Channel adio Sensortelemetry transmitter For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth 10 Hz /0 Hz to 1 khz Brigde supply: 3 Strain gages: 350 Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Supply: 3,3 to 12, 50 ma emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Max load: g (depends on fixing) Type: S_8_<bandwidth>_<accuracy>_<temp>_<mod>_F 1 khz 0,02 85 PCM12 0, PCM16 0,005 -Page 25-

26 2/4 Channel adio Sensortelemetry Amplifier 13,0 22,5 47,0 Ø3,1 M MAE A Sensortelemetrie 36,0 30,0 24,0 Ø3,1 4 Channel adio Sensortelemetry transmitter For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth 10 Hz /0 Hz to 1 khz Brigde supply: 3 Strain gages: 350 Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Supply: 3,3 to 12, 50 ma emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Max load: g (depends on fixing) Type: MS <channels>_<bandwidth>_<accuracy>_<temp>_<mod>_f 2 1 khz 85 PCM PCM16 0,02 0,01 0,005 -Page 26-

27 4/8 Channel Sensor Signal Amplifier Type 4 8 mal Ø3,2 Height 22,0 70 Switch On/Off M MAE A Sensortelemetrie 50,0 40,0 16,0 80,0 90,0 96,0 100,0 Supply voltage supervision LED on --> supply voltage 3,6 LED off --> supply voltage <3,6 4/8 Channel adio Sensortelemetry transmitter For strain gage, PT100, Thermocouple Sensitivity: 0,02 to 20 m/ Bandwidth 10 Hz /0 Hz to 1 khz Brigde supply: 3 Strain gages: 350 Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Supply: 3,3 to 12, 50 ma emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Max load: g (depends on fixing) Type: MS <channels>_<bandwidth>_<accuracy>_<temp>_<mod>_f Hz 0,02 85 PCM Hz 0, PCM Hz 0,005 -Page 27-

28 Sensor Signal Amplifier Type MS_ 5xM3 depth: 4 mm Lemo socket: HG CLLS Magnet for remote shunt calibration Ø80,0 Ø56,0 1,5 M MAE A Sensortelemetrie 20,5 21,0 Sensor with transmitter Sensor with transmitter Ø81, Connector for remote control eceiver eceiver 0 to ±10 S232, USB 0 to ±10 S232, USB Ø63,1 Multi Channel adio Sensortelemetry transmitter for wheels or end shaft applications For strain gage, PT100, Thermocouple Channels: 2, 4, 8, 16 Sensitivity: 0,02 to 20 m/ Bandwidth 10 Hz /0 Hz to 1 khz Brigde supply: 3, Accu rechargeable Strain gages: 350 Transmission: adio Sensortelemetry PCM Diameter: 80 mm, height: 43 mm esolution: 12 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) echarging by inductive recharging cap (contactless) Operating time between recharging. 30 hours Activating by switch emote range control, auto zero (option) Environmental temperature: -25 to +85 C (120 C) Protection IP67 Max load: g (depends on fixing) Type: MS <channels>_<bandwidth>_<accuracy>_<temp>_<mod>_f 1 10 Hz 0,02 85 PCM , PCM kHz 0,005 -Page 28-

29 Sensor Signal Amplifier Type MS_ special for temperature aquisition at wheels 5xM3 depth: 4 mm Lemo socket: HG CLLS Magnet for remote shunt calibration Ø80,0 Ø56,0 1,5 M MAE A Sensortelemetrie 20,5 21,0 Ø81,0 Thermocouple with transmitter.... Thermocouple with transmitter Connector for remote control 1 n Wireless LA 9to36 CA, USB Ø63,1 Multi Channel adio Sensortelemetry transmitter for wheels or end shaft applications For Thermocouple type K Channels: 2, 4, 8, 16 ange: -50 to 1000 C Sample/sec: 10 Local aera LA time multiplex (one frequency Brigde supply: 3, Accu rechargeable Transmission: adio Sensortelemetry PCM Diameter: 80 mm, height: 43 mm esolution: 12 Bit (16 Bit) Drift zero: 0,02 (0,01, 0,005 option) Low power consumption, operating time between recharging. 150 hours echarging by inductive recharging cap (contactless) Activating by switch Environmental temperature: -25 to +85 C (120 C) Protection IP68 Max load: g (depends on fixing) Type: MS <channels>_<sample>_<range>_<temp>_<mod>_f ,1/s 1/s 10/s 0,02 0,01 0, PCM12 PCM16 -Page 29-

30 eceiver (AW_D) 49,0 20,0 42,0 M2,5 M A MAE Sensortelemetrie Sensorsignal-Drehübertrager Pin 1: Output U: 0 to +/- 10 olt Pin 1: Output U: 0 to +/- 5 olt Pin 3: Input Mod.(Cal.)aktive low Pin 3: Input Mod.(Cal.)aktive high Pin 6: PM Pin 7: Supply +15 +/-2% Pin 7: Supply +24 +/-10% 79,0 72,0 Pin 8: Output I: 0 to + 20 ma Pin 8: Output I: 4 to + 20 ma Pin 9: Output F:100kHz ±50kHz Pin 9: Output F:25kHz ±12,5kHz PCM Pin 2: GD Output Pin 5: GD Supply LED yellow: Supply LED green: Signal Pin Assignment of the D-Sub connector Pin 1 Output -10 to +10 Pin 2 GD Output Pin 3 do not connect Pin 4 do not connect Pin 5 GD Power Supply Pin 6 do not connect Pin 7 Power Supply 24 DC ±10% Pin 8 do not connect Pin 9 do not connect 1 Channel adio Sensortelemetry eceiver Bandwidth: 0 to 1kHz Output: ±10 (0(4) to 20 ma, frequency, binary, USB) F frequency: 433 MHz Transmission: adio Sensortelemetry PCM Integrated filter esolution: 12 Bit (16 Bit) Environmental temperature: -25 to +85 C (-45 to +85 C) Supply: 24 (±5%), 15 (±2%), 9 to 36 (board supply) Type: AW_D_<bandwidth>_<supply>_<output>_<F-power>_<mod>_F M MAE A Sensortelemetrie 1 khz U I B USB 1W 3W PCM -Page 30-

31 Evaluation Unit (AW_M) 30,0 60,0 50,0 Ø3,3 M A MAE Sensortelemetrie Evaluation unit + - Pin Assignment of the D-Sub connector Pin 1 Output -10 to +10 Pin 2 GD Output Pin 3 do not connect Pin 4 do not connect Pin 5 GD Power Supply Pin 6 do not connect Pin 7 Power Supply 24 DC ±10% Pin 8 do not connect Pin 9 do not connect 140,0 130,0 Frequency Zero Gain 1 Channel adio Sensortelemetry eceiver Bandwidth: 0 to 1kHz Output: ±10 (0(4) to 20 ma, frequency, binary, USB) F frequency: 433 MHz Transmission: adio Sensortelemetry PCM Integrated filter esolution: 12 Bit (16 Bit) Environmental temperature: -25 to +85 C (-45 to +85 C) Supply: 24 (±5%), 15 (±2%), 9 to 36 (board supply) Type: AW_M_<bandwidth>_<supply>_<output>_<mod>_F M MAE A Sensortelemetrie 1 khz U I B USB PCM12 PCM16 -Page 31-

32 Evaluation Unit (AW_P) ,5 60,0 Ø5,2 Pin Assignment of the D-Sub connector ZEO GAI ,0 + - Frequency M A MAE Sensortelemetrie Torque eceiver Pin 1 Output -10 to +10 Pin 2 GD Output Pin 3 do not connect Pin 4 do not connect Pin 5 GD Power Supply Pin 6 do not connect Pin 7 Power Supply 24 DC ±10% Pin 8 do not connect Pin 9 do not connect 1/2 Channel adio Sensortelemetry eceiver Bandwidth: 0 to 1kHz Output: ±10 (0(4) to 20 ma, frequency, binary, USB) F frequency: 433 MHz Transmission: adio Sensortelemetry PCM Integrated filter esolution: 12 Bit (16 Bit) Environmental temperature: -25 to +85 C (-45 to +85 C) Supply: 24 (±5%), 15 (±2%), 9 to 36 (board supply) Type: AW_P_<bandwidth>_<channels>_<supply>_<output>_<mod>_F M MAE A Sensortelemetrie 1kHz U I B USB PCM12 PCM16 -Page 32-

33 Evaluation Unit (AW_ES) 1 Channel adio Sensortelemetry eceiver Bandwidth: 0 to 1kHz Output: ±10 (0(4) to 20 ma, frequency, binary, USB) F frequency: 433 MHz Transmission: adio Sensortelemetry PCM Integrated filter esolution: 12 Bit (16 Bit) Environmental temperature: -25 to +85 C (-45 to +85 C) Supply: 24 (±5%), 15 (±2%), 9 to 36 (board supply) Type: AW_ES_<bandwidth>_<supply>_<output>_<mod>_F 1 khz 15 U I PCM12 PCM16 M MAE A Sensortelemetrie -Page 33-

34 Evaluation Unit (84TE) Sensortelemetrie Demultiplexer Demultiplexer M A MA MA for example Front side 1/2/4/8/16/32 Channel FM/PCM eceiver Bandwidth: 0 to 1kHz Output: ±10 (0(4) to 20 ma, binary, USB) Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) emote shunt calibration Environmental temperature: -25 to +65 C Supply: 9 to 270 AC, 9 to 36 (board supply) DC Type: AW_T_<bandwidth>_<channels>_<supply>_<output>_<mod>_F M MAE A Sensortelemetrie 1 khz U I B USB PCM12 PCM16 -Page 34-

35 Evaluation Unit (84TE) Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie Sensortelemetrie M M M M M M M M M M M M A A A A A A A A A A A A 1/2/4/8 Channel PCM eceiver with Single Channels Bandwidth: 0 to 1kHz Output: ±10, (0(4) to 20 ma, binary, USB) Transmission: adio Sensortelemetry PCM Integrated filter esolution: 12 Bit (16 Bit) Max. Plugin cards: 12 (single channels) Environmental temperature: -25 to +65 C Supply: 9 to 270 AC, 9 to 36 (board supply) DC Type: AW_T_<bandwidth>_<channels>_<supply>_<output>_<mod>_F 1 khz U I B USB PCM12 PCM16 M MAE A Sensortelemetrie -Page 35-

36 Evaluation Unit (42TE) Sensortelemetrie Demultiplexer Demultiplexer M A MA MA for example Front side 1/2/4/8 Channel PCM eceiver Bandwidth: 0 to 1kHz Output: ±10, (0(4) to 20 ma, binary, USB) Transmission: adio Sensortelemetry PCM Integrated filter esolution: 12 Bit (16 Bit) emote shunt calibration Environmental temperature: -25 to +65 C Supply: 9 to 270 AC, 9 to 36 (board supply) DC Type: AW_T_<bandwidth>_<channels>_<supply>_<output>_<mod>_F 1 khz U I B USB PCM12 PCM16 M MAE A Sensortelemetrie -Page 36-

37 Evaluation Unit (22TE) Sensortelemetrie Demultiplexer M A M A for example Front side 1/2/4 Channel FM/PCM eceiver Bandwidth: 0 to 1kHz Output: ±10, (0(4) to 20 ma, binary, USB) Transmission: adio Sensortelemetry PCM Integrated filter esolution: 14 Bit (16 Bit) emote shunt calibration Environmental temperature: -25 to +65 C Supply: 9 to 270 AC, 9 to 36 (board supply) DC Type: AW_T_<bandwidth>_<channels>_<supply>_<output>_<mod>_F 1kHz U I B USB PCM M MAE A Sensortelemetrie -Page 37-

38 eceiving / Transmitting Antenna with magnetic Foot 87 Feature Coaxial cable G58 Max. length 10 m Frequency 433 MHz Height: 87 mm Magnic foot Coax cable 50 W Cable length: 5 m Environmental temperature: -35 to +65 C Type: Ant_<1>_F ca M MAE A Sensortelemetrie -Page 38-