AERINOS Profisens - Wireless IoT Platform
|
|
|
- Gervase Felix Lyons
- 5 years ago
- Views:
Transcription
1 Introduction AERINOS ProfiSens is a local area wireless IOT platform. It comprises wireless sensor nodes and a 3G Data Gateway. Using ProfiSens, you can deploy anywhere your private IOT network. The battery powered, wireless end nodes, offer reliable communication and outdoor enclosures to satisfy a variety of measurement and monitoring applications. The acquired sensor data wirelessly transmits to the data concentrator with 3G connectivity, which forwards data files to an FTP server and alarm SMS to predefined users. The coverage of the wireless network can reach a radius of 1-6 km (Line of sight). The network uses a proprietary protocol with bidirectional communications. Data concentrator and sensor end nodes support autonomous battery powered operation and provide options for external power supply. System components ADU-700: Autonomous, wireless data concentrator with internal 3G modem ADS-10x Series: Wireless end nodes for low voltage, low power sensors ADS-20x Series: Wireless end nodes with multiple sensor support Applications Agricultural Monitoring Tank level monitoring Water/wastewater Oil & Gas Asset management Environmental Monitoring Distributed Temperature Monitoring 1
2 Data concentrator & Gateway ADU-700 Autonomous RTU ADU-700 is a low power data concentrator for AERINOS Profisens wireless end nodes. Modes of operation include autonomous battery operation and external power supply operation with uninterruptible transition to battery operation during power outage. ADU-700 incorporates a 3G, GSM/GPRS modem and supports periodical data transmission via FTP and alerting via SMS. Features Up to 32 sensor end nodes, for a total of 64 measurement channels. Outdoor operation External power supply or battery powered operation. Available for different license free bands. Technical Characteristics Power supply Maximum Range Data memory Digital inputs Wireless modem GNSS Data transmission Alarm transmission Serial interface Temperature Indications Dimensions Protection Weight Internal: 3.6V, 13Ah Lithium Thionyl battery External: 9-24 VDC, 26VDC max 433MHz: 1200m, 868MHz: 800m, 915MHz: 300m 128kB EEPROM 4, dry contact or 0-30VDC Quad Band, 3G, GSM/EGPRS (850/900/1800/1900MHz) GPS & GLONASS FTP SMS USB, up to 115kBit/s C, operating 2 LED, Network status, Operation status 130 x 130 x 75 mm IP kg 2
3 Sensor end nodes ADS-10x series ADS-10x are battery powered, wireless end nodes for low voltage, low power sensors. The units are available for the 433 MHz band and optional for license free bands 868 MHz and 915MHz. Types ADS-101: 1 Thermocouple input, 1 digital input ADS-102: 2 analog inputs, 1 digital input Common Characteristics Power supply Maximum Range Max output power Antenna Data memory Transmission Period Serial port Temperature Dimensions Protection Weight 3.6V, 2.6Ah Lithium Thionyl battery, AA-size 433MHz: 1200m, 868MHz: 800m, 915MHz: 300m 10dBm (10mW) internal 16kB EEPROM 300 sec TTL, 9600 to bps -40 C C, operating 65 x 123 x 57 mm (with cable gland) IP kg 3
4 Type characteristics ADS 101 Analog inputs 1, Thermocouple Type K Range -100 C to +250 C (0 C to +500 C optional) Accuracy ±2 C in the range of 25 C to +250 C A/D conversion 12 bit Digital inputs 1, dry contact or 0-30 VDC (DI 1) Counters 1, 2 khz, common with DI 1 ADS 102 Analog inputs 2, 0-1V (0-2.5V, 0-5V optional) Offset voltage: 50 μv max. Input Bias Current 1 pa max. A/D conversion 12 bit Sensor excitation 3.6 VDC, 120mA (with TADIRAN TL-2100 Battery) Digital inputs 1, dry contact or 0-30 VDC (DI 1) Counters 1, 2 khz, common with DI 1 4
5 ADS-20x series ADS-20x are battery powered, wireless end nodes for low voltage, low power sensors. The units are available for the 433 MHz band and optional for license free bands 868 MHz and 915MHz. Types ADS-200: 1 configurable input as digital or analog, SDI-12 & RS-485 Sensors support ADS-201: 1 high accuracy Strain gauge Bridge Amplifier input, 1digital input Common Characteristics Power supply Maximum Range Max output power Antenna Data memory Transmission Period Serial port Temperature Dimensions Protection Weight 3.6V, Ah Lithium Thionyl battery, D-size 433MHz: 1200m, 868MHz: 800m, 915MHz: 300m 10dBm (10mW) external or internal 16kB EEPROM 300 sec USB, 9600 to bps -40 C C, operating 79.5 x 125 x 61 mm (with cable gland) IP kg 5
6 Type characteristics ADS 200 Discrete inputs SDI-12 Bus RS-485, MODBUS Transducer excitation ADS 201 1, Configurable as: Digital input, 0-30VDC, configurable as Counter (1kHz) Analog input, 0-1VDC, 12 bit resolution 16 Channels, multiple sensor support. 8 Channels, multiple sensor support. 12V/250mA, 5V/200mA Analog inputs 1, Bridge Amplifier (Instrumentation Amplifier) Input Impedance Differential 50 MΩ Common Mode 10 GΩ Input Offset Voltage 20 μv max. Input Voltage Noise 0.7 μv p-p at f = 0.01 Hz to 10 Hz Input Bias Current 1nA max. Nonlinearity % FS Gain Drift 25 ppm/ C max. Gain 100 (50, 250 optional) Dynamic Response DC to -3 db = 1 khz Common-Mode Rejection 100 db gain 100 Bridge Excitation 10VDC/200mA, 5 VDC/200mA A/D conversion 16 bit resolution Digital inputs 1, dry contact or 0-30 VDC (DI 1) Counters 1, 1 KHz, common with DI 1 6
7 Ordering Information ADU Y: Autonomous, wireless data concentrator with internal 3G, GSM/EGPRS modem ADS X - Y: Sensor end node with 1 Thermocouple K input + 1 digital input X = 25, Range: -100 C to +250 C (Default) X = 50, Range: 0 C to +500 C (Option) ADS-102 X - Y: Sensor end node with 2 analog inputs + 1 digital input X = 10, Analog input Range: 0-1V (Default) X = 25, Analog input Range: 0-2.5V (Option) X = 50, Analog input Range: 0-5V (Option) ADS-200 Y - Z: Sensor end node with multiple sensor support ADS-201 Y - Z: Sensor end node with Strain Gage Bridge Amplifier Y=4: Y=8: Y=9: Z=1: Z=2: 433MHz band, default (Worldwide) 868MHz band, optional (CE) 915MHz band, optional (FCC) Internal μsplatch Antenna (Linx) External SMA Antenna connector Revision: , Infinite Informatics Ltd Infinite Informatics, Ltd 1, Valaoritou Street GR Thessaloniki, Greece Phone: info@indinf.gr URL: Representative - Authorized dealer 7
AERINOS SIGFOX IOT Solutions
1. Introduction Sigfox is a communication protocol that is used to read data from sensors through a fixed network of base stations. It works like a low cost SMS service. As an enduser, you only need to
THE CONNECTED INFRASTRUCTURE SOLUTION MONITORING HOW STRUCTURES EVOLVE
THE CONNECTED INFRASTRUCTURE SOLUTION MONITORING HOW STRUCTURES EVOLVE Loadsensing is a data acquisition and monitoring system which combines state-of-the-art wireless monitoring and advanced software
ZZxD-Nx-xR Series. Wireless Modbus I/O B&B ELECTRONICS PRODUCT INFORMATION
Modular, Customizable Wire Replacement Modbus ASCII /RTU Compatible Wide Operating Temperature Active Repeater Functionality 10 to 48 VDC & 24 VAC Input Power Zlinx Wireless Modbus I/O - flexible enough
CRD WR_LOG _ WR LOG WIRELESS MONITORING SYSTEM READOUT UNITS AND DATALOGGERS
CRD WR_LOG _ WR LOG WIRELESS MONITORING SYSTEM READOUT UNITS AND DATALOGGERS WR LOG WIRELESS MONITORING SYSTEM WR LOG wireless monitoring system is composed by a number of nodes to which instruments are
CRD WR_LOG _ WR LOG WIRELESS MONITORING SYSTEM READOUT UNITS AND DATALOGGERS
CRD _ WR LOG WIRELESS MONITORING SYSTEM READOUT UNITS AND DATALOGGERS _EN_03_12/2018 WR LOG WIRELESS MONITORING SYSTEM WR LOG wireless monitoring system is composed by a number of nodes to which instruments
GS Strain gauge reader/ transmitter. GS series of wireless industrial sensors. Features: General Description: Applications:
GS series of wireless industrial sensors Strain gauge reader/ transmitter Features: Input: strain gauge Wheatstone bridge: 300ohms to 10kohms. Typical: 1000 ohms. Standard input range: up to 2mV/V full
HANWELL UTILITY DATA SHEET
HANWELL UTILITY DATA SHEET HANWELL UTILITY The Hanwell utility range is an innovative monitoring system that measures and records utility usage over time and allows statistical analysis of kilowatts/hrs,
WIRELESS MODBUS GATEWAY WGW410
WIRELESS MODBUS GATEWAY WGW410 The Tekon Wireless Modbus Gateway WGW410 is specifically designed to meet the most rigorous requirements of operation in the industrial process environments. Due to their
The wireless alternative to expensive cabling...
The wireless alternative to expensive cabling... ELPRO 905U Wireless Solutions for Process Applications New Products... New Solutions The ELPRO 905U range of wireless I/O provides a low cost alternative
Zlinx Wireless I/O. Peer-to-Peer and Modbus I/O PRODUCT INFORMATION B&B ELECTRONICS
Zlinx Wireless Modbus I/O-0712ds page 1/5 Modular, Customizable Wire Replacement 128 / 256 Bit AES Encryption Software Selectable RF Transmit Power Software Selectable Over-the-air Data Rate Modbus ASCII
The wireless alternative to expensive cabling...
The wireless alternative to expensive cabling... ELPRO 105U Wireless Solutions for Process Applications New Products... New Solutions The ELPRO 105U range of wireless I/O provides a low cost alternative
USB-TEMP and TC Series USB-Based Temperature Measurement Devices
USB-Based Temperature Measurement Devices Features Temperature and voltage measurement USB devices Thermocouple, RTD, thermistor, or semiconductor sensor measurements Eight analog inputs Up to ±10 V inputs*
905U Wireless. New Products... New Solutions. The wireless alternative to expensive cabling... Simple but Reliable. Easy to Use
Wireless New Products... New Solutions The range of telemetry modules provide remote monitoring and control by radio or twisted-pair wire, over short or long distances. Transducer signals connected at
Quick Installation Guide ARM-X4404 Advanced Radio Modem
Quick Installation Guide ARM-X4404 Advanced Radio Modem Before setting the product, please read the following recommendations Do not plug 110 or 220V power supply to the radio modem (Operating voltage:
The wireless alternative to expensive cabling...
The wireless alternative to expensive cabling... ELPRO 905U Wireless Solutions for Process Applications New Products... New Solutions The ELPRO 905U range of telemetry modules provide remote monitoring
Ethernet-Based Temperature, Voltage and Strain Measurement Modules
Ethernet-Based Temperature, Voltage and Strain Measurement Modules OMB-NET6000 Series OMB-NET6220 shown smaller than actual size. U 12 Analog Inputs U 8 Digital I/O U Simultaneous Sampling U Multiple Trigger
AcuMesh Wireless RS485 Network. User's Manual SOLUTION
AcuMesh Wireless RS485 Network User's Manual AN SOLUTION ACUMESH - WIRELESS METERING SYSTEM COPYRIGHT 2015 V1.2 This manual may not be altered or reproduced in whole or in part by any means without the
USB-2404-UI Specifications
Specifications Document Revision 1.1, April, 2011 Copyright 2011, Measurement Computing Corporation All specifications are subject to change without notice. Typical for the range 0 to 60 C unless otherwise
Differential charge amplifier
Electronics Differential charge amplifier Type 5181A... The differential charge amplifier is used for signal conversion of piezoelectric sensors with differential output. Executions Aluminum die-cast enclosure
Wireless Multi Discrete Input Transmitter Series XYR 6000, Model STXW500 Specifications
Wireless Multi Discrete Input Transmitter Series XYR 6000, Model STXW500 Specifications 34-XY-03-33 February 2010 Model STXW500 - Up to 3 discrete inputs) Introduction Building upon the tremendously successful
ADAM 4000/4100 Series
ADAM 4000/4100 Series Common Dimensions Communication RS-485 (2-wire) to host Speeds: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps (ADAM-4080, ADAM-4080D only support up to 38400 bps) Max. communication
Signal Conditioning Amplifier
2300 System Micro-Measurements FEATURES Accepts all strain gage inputs (foil and piezoresistive), potentiometers, DCDT s, etc Selectable bridge excitation, 0.7 to 15 VDC (11 steps), plus 0.2 to 7 VDC continuously
IJINUS. HF communication /////
Level measuring range from 3 to 10m Integrated conversion tables(flow rate, volume) Wireless setting with Rfid technology Memory : up to 500 000 measures Sealing : IP68 Replaceable lithium battery powered
WIRELESS BASE STATION WIRELESS CONFIGURATION TOOL WIRELESS REPEATER
WIRELESS BASE STATION FLTA is a base station for wireless network transmitters and I/O modules. From FLTA, the controls and measurements can be read via Modbus RTU and through the analogue outputs. Respectively
Main Features. Highlights
Highlights For portable use or continuos system; Multi-position measuring system using wireless communication from MASTER to SLAVE units; N.4 analog inputs, n.1 digital inputs; Inputs extension using MASTER/SLAVE
ARP Radio Modem & Router Datasheet
ABB Power Systems ARP Radio Modem & Router Datasheet Radio Router 83kbps / 25kHz 1xETH, 2xCOM,1xUSB 0.1 10 watts Sleep & Save modes - 40 to + 70 C Embedded diagnostic 256 AES encryption SW feature keys
NEW! AOIP FD5 Advanced Digital Data Logger
NEW! AOIP FD5 Advanced Digital Data Logger Versatile data logger, each output channel can be custom configured for current, voltage, resistance, frequency, and temperature. The NEW! FD5 Digital Datalogger
Model 140 Inline Amplifier
Model 140 Inline Amplifier Low Noise Inline Amplifier Small Rugged Package Includes Auto-Zero Function The Model 140 is a remote in-line DC amplifier designed to be used with bridgetype mv output transducers.
R-Log Radio data logger
> data loggers R-Log Radio data logger Highlights For portable use or continuos system; Multi-position measuring system using wireless communication from MASTER to SLAVE units; N.4 analog inputs, n.1 digital
SAPLING WIRELESS SYSTEM
SAPLING WIRELESS SYSTEM Sapling Wireless System DESCRIPTION A Wireless Clock System starts with a master clock with a transmitter. The master clock s transmitter transmits the time data to the secondary
Specification Sym Notes Minimum Typical Maximum Units 900 MHz Operating Frequency Range MHz
900 MHz FHSS DNT90/Ethernet Gateway Optional 128-Bit AES Encryption Point-to-point, Point-to-multipoint or Store and Forward Operation 158 mw EIRP 900 MHz Transmitter Power 10/100Base-T Auto-sensing Ethernet
CSG110 Strain Gauge Universal Amplifier
Quick Start Guide CSG110 Strain Gauge Universal Amplifier Sensor Solutions Source Load Torque Pressure Multi-Axis Calibration Instruments Software www.futek.com Getting Help TECHNICAL SUPPORT For more
Accutech BR20. DIN rail mounted base radio
Accutech BR20 DIN rail mounted base radio 1 At the heart of any Accutech wireless instrument network is the wireless base radio. The Accutech BR20 automatically communicates with deployed instrumentation
LAUREL ELECTRONICS, INC.
LAUREL ELECTRONICS, INC. Laureate True RMS AC Voltage & Current Meter with 1 Cycle Update at 50/60 Hz Features True AC or AC plus DC RMS measurement with crest factor of 3.0 at FS Fast response: reading
AUTOMATIC WEATHER AND HYDROLOGICAL STATIONS
AUTOMATIC WEATHER AND HYDROLOGICAL STATIONS METEODATA/HYDRODATA-3000C SERIES Brochure nº 9722.0044 GEONICA, S.A. - Alejandro Rodríguez, nº 22-28039 Madrid - Spain Tel. +34 91 450 51 18 Fax +34 91 459 46
PLUS WGW420 WIRELESS GATEWAY 868MHz
PLUS WGW420 WIRELESS GATEWAY 868MHz REF.: PA164510210 An easy-to-use system that allows wireless reception and transmission of any process variables that could be transformed into an analogue signal. PLUS
P/N: AX Ordering Part Numbers: SAE J1939 Controller: For baud rate, refer to the table below for the appropriate P/N. Mating Plug Kit: AX070123
TECHNICAL DATASHEET #TDAX181000 TC/Analog Inputs to CAN Controller 4 Thermocouple, 7 Analog & 3 Signal Inputs 12 Vdc, 24 Vdc, 48 Vdc 2 CAN (SAE J1939) with Electronic Assistant Description: The TC/Analog
Teleterm D3G Remote Terminal Unit
Monitor and control your remote assets securely via any web browser. Compatible with the Data2Desktop web service. ISaGRAF 611313 ready (order CC030A URTT to activate) 4 hour integrated battery backup
RTKWARE UBR1 Technical Datasheet. ver1.1 (29/04/2015)
RTKWARE UBR1 Technical Datasheet ver1.1 (29/04/2015) Table of Contents Table of Contents... 2 Overview... 3 Key-Features... 3 Applications... 3 Functional diagrams... 4 Power Distribution... 4 Data...
User Manual CTP4/8/16
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com User Manual CTP4/8/16 4/8/16-channel
Reason RT431. GE Grid Solutions. GPS Precision-Time Clock. Precise Time Synchronization. Compact Design. Hardened for Industry. Time Synchronization
GE Grid Solutions Reason RT431 GPS Precision-Time Clock The demand for accurate time synchronization available 24/7 increases with the growth of critical substation applications, such as phasor measurement,
Differential Charge Amplifier
Electronics Differential Type 58A... The differential charge amplifier is used for signal conversion of piezoelectric sensors with differential output. Executions Aluminum die-cast enclosure (IP64) Plastic
The wireless alternative to expensive cabling...
The wireless alternative to expensive cabling... ELPRO 105U ISO 9001 Certified New Products... New Solutions The ELPRO 105 range of telemetry modules provide remote monitoring and control by radio or twisted-pair
Ultralow Offset Voltage Operational Amplifier OP07
Ultralow Offset Voltage Operational Amplifier OP07 FEATURES Low VOS: 75 μv maximum Low VOS drift:.3 μv/ C maximum Ultrastable vs. time:.5 μv per month maximum Low noise: 0.6 μv p-p maximum Wide input voltage
Operation. Displayed channel. Measuring range. Status indication/ remote control Key lock Measuring mode/ time constant. Scale.
Electronics & Software Type 5080A... Multichannel Laboratory This universal laboratory charge amplifier can be used for force and torque measurements with piezoelectric dynamometers or force plates. Piezoelectric
SEFRAM DAS Sefram. Sefram. A new family of paperless recorders 6 to 72 channels, to cover all your applications
Sefram SEFRAM Make sure to visit our Website http://wwwseframfr A new family of paperless recorders 6 to 72 channels, to cover all your applications 6 to 72 analogue channels Measurement boards : - 6 isolated
KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP8-Rotate 8 (4) channel telemetry
Specifications. Trimble SPS985L GNSS Smart Antenna
Receiver Name Configuration Option Base and Rover interchangeability Rover position update rate Rover maximum range from base radio Rover operation within a VRS network Heading and Moving Base operation
KCS TraceME TM-203 / R9F4 GPS / GPRS / SMS / RFID module, OEM Version
KCS TraceME TM-203 / R9F4 GPS / GPRS / SMS / RFID module, OEM Version The KCS GPRS/GPS range of modules enables you to remotely track & trace people, animals and a variety of objects, e.g. cars, trucks,
GEONICA, S.A. - Alejandro Rodríguez, nº Madrid - Spain Tel Fax
A U T O M A T I C W E A T H E R A N D H Y D R O L O G I C A L S T A T I O N S M E T E O D A T A / H Y D R O D A T A - 2 0 0 0 C S E R I E S The type Automatic Meteorological and Hydrological Stations are
Telemetrie-Messtechnik Schnorrenberg
Telemetrie-Messtechnik Schnorrenberg CTP8-Rotate 8 (4) channel telemetry for rotating applications like wheels or rotors, high signal bandwidth, 16bit, software programmable Inputs for STG, TH-K, ICP or
Continuous, remote monitoring and logging of electromagnetic fields
NARDA EMF MONITORS AMB-8059 Continuous, remote monitoring and logging of electromagnetic fields Interchangeable probes from 10 Hz to 40 GHz for low frequency & high frequency applications Multi-band probes
Isolated High Level Voltage Output 7B22 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated High Level Voltage Output 7B22 FEATURES Unity gain single-channel signal conditioning output module. Interfaces and filters a +10 V input signal and provides an isolated precision output of +10V.
186m (-2m) 110m (+20m)
KENKUL-Wireless Sensor Network System KENKUL-WSN Wireless Sensor Network system Combination:Wireless Sensor Node, Gateway Reader and Software Wireless Sensor Node supply sensor s working power, and provide
S O P H I S T I C A T E D A U T O M A T I O N
S O P H I S T I C A T E D A U T O M A T I O N Introduction Cost-effective Radio modems to any serial communication application Low power models, different frequency ranges RS232 / / RS422 / 5V TTL interface
CTP16-Rotate. KMT - Kraus Messtechnik GmbH
KMT - Kraus Messtechnik GmbH Gewerbering 9, D-83624 Otterfing, Germany, 08024-48737, Fax. 08024-5532 Home Page http://www.kmt-telemetry.com, Email: info@kmt-telemetry.com CTP16-Rotate 16 channel telemetry
Q.raxx A slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field of stationary
New IP67 Product Range
New Product Range GNSS-L1G1 and GNSS-L1L2-67D1 range Roger repeaters cover GPS L1&L2 and GLONASS satellite signals. products are easy to install even in harsh conditions. This makes them ideal for places
Advanced Ladder Logic Full IEC Languages 25A for <1 24 VDC DC Switched
EXL6 OCS Datasheet for HE- EXL1E0, HE- EXL1E2, HE- EXL1E3, HE- EXL1E4, HE- EXL1E5, HE- EXL1E6 HEXT371C100, HEXT371C112, HEXT371C113, HEXT371C114, HEXT371C115, HEXT371C116 1. Specifications Required Power
ēko Pro Series System
ēko Pro Series System FOR ENVIRONMENTAL MONITORING The ACEINNA ēko Pro Series Starter Kit is a wireless agricultural and environmental sensing system for crop monitoring, microclimate studies and environmental
INSTALLATION and OPERATION INSTRUCTIONS. FOR FiberLink BI-DIRECTIONAL AMPLIFIER WITH DIVERSITY MW-FBDA-800AB-50W-DIV
INSTALLATION and OPERATION INSTRUCTIONS FOR FiberLink BI-DIRECTIONAL AMPLIFIER WITH DIVERSITY MW-FBDA-800AB-50W-DIV Page 1 of 15 TABLE OF CONTENTS PARA No. PARAGRAPH PAGE No. 1. OVERVIEW 3 2. COMPONENT
Q.raxx A slimline RS / EC Multi Channel System for Thermocouples
The Q.raxx slimline product is based on the standardized 19 technology, one rack unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field of stationary
Analog Signal Conditioning Accessories
NI 64-channel multiplexer mv, V, current, and thermocouple inputs NI 8-channel simultaneous sample-and-hold mv, V inputs NI SC-2042-RTD 8-channel RTD/thermistor RTD, thermistor, mv, V inputs NI 8-channel
KENKUL-LoRa Sensor Networks
KENKUL- KENKUL-LoRa Sensor Networks KENKUL-LoRa LoRa wireless sensor network system Combination:, LoRa-Gateway and Software supply sensor s working power, and provide multiple signal input, active push
GC9838-LR - INTELLIGENT HYBRID PLC-RF DIN RAIL MODEM
GC9838-LR - INTELLIGENT HYBRID PLC-RF DIN RAIL MODEM and a built-in sub-ghz wireless module to allow adaptive networking over different media. The wireless connectivity can be available in LoRa for tree-structure
Specifications. Trimble SPS985L GNSS Smart Antenna
Receiver Name Configuration Option Base and Rover interchangeability Rover position update rate Rover maximum range from base radio Rover operation within a VRS network Heading and Moving Base operation
Q.raxx A101-8 slimline RS / EC
The Q.raxx slimline product is based on the standardized 19 technology, one rack mount unit (1 U) and is designed for measurements with a high level of flexibility, reliability and accuracy in the field
Dx: Digital Multi-Channel Telemetry System
Instrumented shaft with signal conditioning and transmitter unit (SCT) and inductive power supply Receiver, Control and Interface Unit (RCI) For measurements with rotating objects, a telemetry system for
Instrumentation amplifier
Instrumentationamplifieris a closed-loop gainblock that has a differential input and an output that is single-ended with respect to a reference terminal. Application: are intended to be used whenever acquisition
Industrial Modbus I/O Modules
Industrial Modbus I/O Modules Modbus I/O Modules Introduction & Features Digital Input / Output Modules Analog Input / Output Modules Modbus I/O Modules The Best Choice For Your SCADA Applications Introduction
Connecting Mains Electrical Power
Tide Level Monitoring Instrumentation The following documentation details the electrical installation for the tide level monitoring instrumentation and also a summary of the logger configurations required
[ tima-datasheet-en v11.1 ]
![[ tima-datasheet-en v11.1 ]](/thumbs/92/109134204.jpg "[ tima-datasheet-en v11.1 ]")
specifically designed for protection, automation and control applications in power systems 60 ns (99%) maximum time deviation single or dual 10/100Base-T Ethernet port(s) VLAN / IEEE 802.1Q support RS232
ACUMESH - WIRELESS RS485 NETWORK KEY FEATURES ACUMESH - WIRELESS METERING SYSTEM
ACUMESH WIRELESS RS485 NETWORK The AcuMesh wireless metering solution is designed to connect energy meters and any devices by communicating with RS485 wirelessly. AcuMesh is a costeffective solution that
GPS10RBN - 10 MHz, GPS Disciplined Rubidium Frequency Standard
GPS10RBN - 10 MHz, GPS Disciplined Rubidium Standard Completely self-contained unit. No extra P.C needed. Full information available via LCD. Rubidium Oscillator locked to GPS satellite signal. Accuracy
DTM.OCS.S/N - Modbus Level Transmitter
Digital Submersible Level Transmitter with Modbus Interface DTM.OCS.S/N - Modbus Level Transmitter CUSTOMER BENEFITS High precision digital level transmitter with standard Modbus interface Fast customization
Preliminary. ENV-Link -Mini - Wireless Environmental Monitoring Node. Little Sensors, Big Ideas. Introduction. System Overview. Features & Benefits
ipad ENV-Link -Mini - LXRS Data Sheet Features & Benefits supports RHT and 3 additional sensors plug and play; quickly add/swap/replace sensors lossless wireless communication protocol provides 100% packet
TECHNICAL DATASHEET #TDAX ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER
Preliminary TECHNICAL DATASHEET TDAX130540 ISOLATED DUAL CHANNEL UNIVERSAL SIGNAL CONVERTER 2 Analog (Bipolar), Resistive, Digital, Frequency (RPM) or PWM Signal Inputs Encoder Input Magnetic Pick Up Input
Precision, Low Power, Micropower Dual Operational Amplifier OP290
Precision, Low Power, Micropower Dual Operational Amplifier OP9 FEATURES Single-/dual-supply operation:. V to 3 V, ±.8 V to ±8 V True single-supply operation; input and output voltage Input/output ranges
ARD154. DIN rail mountable amplifier for strain gage sensors. User s guide. User s guide ARD CONNECTING 4-WIRE SENSORS
6. CONNECTING 4-WIRE SENSORS Connections : S+ connected to module A+ S- connected to module A- Shield connected to A- or to GND of analog output Nota: A- and GND are connected together inside the module.
4GHz / 6GHz Radiation Measurement System
4GHz / 6GHz Radiation Measurement System The MegiQ Radiation Measurement System (RMS) is a compact test system that performs 3-axis radiation pattern measurement in non-anechoic spaces. With a frequency
Raveon Technologies Corporation iot.raveon.com
RTK Communications with Raveon LoRa Radios August 2016 Raveon Technologies Corporation 2461 Impala Drive Carlsbad, CA 92010 USA +1-760-444-5995 Raveon Technologies Corporation www.raveon.com www.ravtrack.com
Q.raxx A slimline RS / EC Universal Measurement System
Q.raxx A107-16 slimline RS / EC Universal Measurement System The Q.raxx slimline product is based on the standardised 19 technology, one rack unit (1 U) and is designed for measurements with a high level
TRMC-19 GSM/GPRS DATALOGGER. Applications. Product description. Measure and remote monitoring
TRMC-19 GSM/GPRS DATALOGGER The TRMC-19 is a datalogger/dataconcentrator of measures GSM/GPRS radio or wire. This device fulfills the most demanding requirements and will help you to create an effective,
Remote Site Monitoring
Remote Site Monitoring FEATURES AT A GLANCE Codan Radio Communications now offers Remote Site Monitoring options that provide live site information, giving you the power to respond intelligently to communications
B850 Boiler House Energy Monitor
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
RM24100D. Introduction. Features. 2.4GHz 100mW RS232 / RS485 / RS422 DSSS Radio Modem (IEEE compliant) Operating Manual English 1.
RM24100D 2.4GHz 100mW RS232 / RS485 / RS422 DSSS Radio Modem (IEEE 802.15.4 compliant) Operating Manual English 1.09 Introduction The RM24100D radio modem acts as a wireless serial cable replacement and
REMOTE TRACKING SOLUTION. User Manual Name. CS-P000-TS-1N-Rev.A This document provides the technical specification SOLUTION.
REMOTE TRACKING SOLUTION CS-P00C-RS-1B-Rev.A This document provides the technical specification of REMOTE TRACKING SOLUTION. User Manual Name Ionos E1 Document GL865 numberquad band GSM Module CS-P000-TS-1N-Rev.A
Datalogger DL.OCS/N/RS485
Datalogger DL.OCS/N/RS485 Version: 18.02.2014 Technical Specifications Pressure measuring range (mh2o) 2... 5 > 5... 20 > 20... 250 Overpressure 3 bar 3 x FS ( 3 bar) 3 x FS Burst pressure, (1) > 200 bar
DL.WMS/GPRS/R/SDI-12. Watermanager solution CUSTOMER BENEFITS
Watermanager solution DL.WMS/GPRS/R/SDI-12 CUSTOMER BENEFITS Integrated water management solution Multi-parameter probe: pressure and temperature Various integrated communication technologies Inundation-resistant
1. SYSTEM DESCRIPTION NON - DIRECTIONAL RADIO BEACON TRANSMITTER (NDB) JTM-30C
Documentation Rev.Date Rev. Document no. 1. SYSTEM DESCRIPTION NON - DIRECTIONAL RADIO BEACON TRANSMITTER (NDB) JTM-30C 1. SYSTEM DESCRIPTION... 2 1.1 OVERALL SYSTEM DESCRIPTION... 2 1.2 BASIC MODULES...
MATERIAL SPECIFICATIONS FOR WIRELESS LINK
MATERIAL SPECIFICATIONS FOR WIRELESS LINK SECTION 1 GENERAL The Wireless Link specification is for the listed components to be used in the Wireless Link pay item. Each component includes the antennae and
INSTALLATION AND OPERATING MANUAL
INSTALLATION AND OPERATING MANUAL FOR RBDA-PCS-1/25W-90-A INDOOR REPEATER TABLE OF CONTENTS PARAGRAPH PAGE NO BDA OVERVIEW 3 BDA BLOCK DIAGRAM DESCRIPTION 3 FCC INFORMATION FOR USER 3 BDA BLOCK DIAGRAM
GPRS Inclinometer. Zigbee. CDMA Vibration-wire. SSI PWM Switch Analog. Features. Descriptions
GPRS Inclinometer Features - Industry GPRS interface - Quad-Band 850/ 900/ 1800/ 1900 MHz Transmission - worldwide - Support PBCCH, CSD up to 14.4 kbps - Support single/multi-center modes - Support domain
SOUTHERN AVIONICS COMPANY. SE125 Transmitter. SE125 Transmitter 1-1
1-1 1 Introduction The SE Series transmitters are computer controlled systems designed around an embedded microprocessor. These systems are capable of remote monitoring and maintenance via Ethernet (optional).
Wireless Data Logger RTR-500 Series Data Loggers Features and Specs
Wireless Data Logger RTR-500 Series Data Loggers Features and Specs Items Temp / Humidity / Illuminance / UV / CO2 / Voltage / 4-20mA / Contact / Pulse Count Data Collection Wireless Communication with
RFeye Node. Wideband intelligent spectrum system for remote distributed RF monitoring
RFeye Node Wideband intelligent spectrum system for remote distributed RF monitoring Key features 6 GHz standard and 18 GHz frequency DF and geolocation capable extender Multiple RF ports for multi-antenna
Four Reasons. To Go Wireless NL900S NL6000 NL900 NL5500. Wireless Highspeed Ethernet Transceiver. VHF/UHF Modem
Four Reasons NL900S NL6000 Wireless Highspeed Ethernet Transceiver VHF/UHF Modem NL5500 NL900 VHF/UHF Modem Cost-Effective Performance 900MHz Spread Spectrum To Go Wireless Phone: (800) 233-1728 or (858)
Specifications. Trimble SPS985 GNSS Smart Antenna
Receiver Name Configuration Option Base and Rover interchangeability Rover position update rate Rover maximum range from base radio Rover operation within a VRS network Heading and Moving Base operation
Echo Wireless Vibration System
IMI Sensors - A PCB Piezotronics Division Echo Wireless Vibration System A simple, affordable, effective wireless vibration system Why use valuable manpower to collect vibration data on healthy machines?
Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197
General Description The is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail single-supply operation, outstanding precision specifications, and a high gain bandwidth. This