MINIATURE MOUNTS MAA SERIES, MGN/MGS SERIES, MCB SERIES STANDARDIZED SOLUTIONS FOR LIGHTWEIGHT ELECTRONIC EQUIPMENT
|
|
|
- Elijah Norton
- 5 years ago
- Views:
Transcription
1 MAA SERIES, MGN/MGS SERIES, MCB SERIES STANDARDIZED SOLUTIONS FOR LIGHTWEIGHT ELECTRONIC EQUIPMENT The Miniature Mount Series offer standardized solutions drawn from broad experience in the design of space conserving isolators for a variety of lightweight applications. They are suitable for use with circuit boards, sensors, displays, instruments, control and other electronic modules. Their compactness permits designs utilizing internal suspension arrangements, eliminating the need for sway space outside the case and providing an overall savings in weight. A variety of configurations is offered so that the designer can select the geometry most appropriate to the applications. Miniature Mounts use specially compounded elastomers to assure control during resonant response. All configurations are available with (Broad Temperature Range) elastomer, which provides excellent resonant control and is suitable for use over the temperature range of -65 F to +300 F (-54 C to +49 C). For applications where vibration isolation and returnability are paramount, selected styles are available using II elastomer which is suitable for use over the temperature range of -40 F to +300 F (-40 C to +49 C). For less demanding temperature requirements, the MGN Series uses natural rubber which is useful from -40 F to +80 F (-40 C to +82 C). Toll-Free: ASK LORD ( ) customer.support@lord.com LORD.COM 66 4
2 MAA00 SERIES 0.5 lb (0.23 kg) 0.0 in (0.279 mm) D.A. Inner member 304 stainless steel, passivated Outer member 2024-T35 aluminum, chromate treated per MIL-DTL-554, Class A Elastomer LORD or II Silicone (3.66) (3.53).6.59 (5.5) (5.0).480 (2.9) Ø.075 4X.070 TYP (.9) (.78) MAA MAA MAA MAA #2(.086)-56UNC-2B THD THRU (.94) (.69) Ø.56 Ø (5.6) (.76) (.3) R OR CHAMFER TYP MAA MAA MAA II (6.6) MAA MAA (.89) (.64) Ø.206 (5.23).043 (.09) MAA MAA MAA = n n FIGURE 2 TRANSMISSIBILITY VS. FREQUENCY 0. II Frequency 67 LORD.COM Toll-Free: ASK LORD ( ) customer.support@lord.com
3 MAA002 SERIES lb (0.45 kg) 0.0 in (0.279 mm) D.A. Inner member 304 stainless steel, passivated Outer member 2024-T35 aluminum, chromate treated per MIL-DTL-554, Class A Elastomer LORD or II Silicone MAA MAA MAA MAA Ø..096 (2.57) (2.44) Ø (5.62) (5.37) (9.8) (8.92).55 (4.0) Ø.33 (7.95) MAA MAA MAA /.005 (.76/.3) BREAK EDGE #2-56UNC-2B THD THRU II MAA MAA MAA MAA (8.00) (6.98) (.84) (.69) (3.63) (3.48) MAA = n n (.65) (.40) Ø.8 (4.6).045 (.4) FIGURE 2 TRANSMISSIBILITY VS. FREQUENCY 0. II Frequency Toll-Free: ASK LORD ( ) customer.support@lord.com LORD.COM 68
4 MAA003 SERIES.5 lb (0.68 kg) 0.0 in (0.279 mm) D.A. Metal parts and finish aluminum alloy, chromate treated per MIL-DTL-554, Class A Inner member 2024-T35 or 2024-T4 aluminum Outer member 2024-T35 or 2024-T4 aluminum Elastomer LORD or II or MEB Silicone.024 (26.0) Ø.9.5 (3.02) (2.92) 0.52 (3.00) Ø (32.0) (3.5) Ø.57 (4.5) MAA MAA MAA MAA MAA MEB Ø.9.5 (3.02) (2.92) Ø.83.8 (2.) (20.6) MAA MAA (7.) (6.6) (.65) (.50) II MAA MAA MAA MAA = n n FIGURE 2 TRANSMISSIBILITY VS. FREQUENCY 0. II Frequency 69 LORD.COM Toll-Free: ASK LORD ( ) customer.support@lord.com
5 MAA004 SERIES 2 lb (0.9 kg) 0.0 in (0.279 mm) D.A. Metal parts and finish aluminum alloy, chromate treated per MIL-DTL-554, Class A Inner member and Outer member 2024-T35 aluminum Threaded insert stainless steel Elastomer LORD or II Silicone.79 (8.26).438 (36.53) #4-40UNC-2B STI THD THRU SELF LOCKING HELI-COIL MAA MAA MAA MAA MAA MAA II MAA MAA MAA Ø.070 THRU.066 (.78) (.68) CSK.33/.8 (3.38/3.00) DIA X 2 /98 Ø (7.) (6.6) (2.44) (2.34) Ø (23.8) (22.3).75 (30.) (29.84).7.5 (4.3) (3.8) (.22) (.02) MAA MAA = n n FIGURE 2 TRANSMISSIBILITY VS. FREQUENCY 0. II Frequency Toll-Free: ASK LORD ( ) customer.support@lord.com LORD.COM 70
6 MGN/MGS00 SERIES to 4 lb (0.5 to.8 kg) : 0.0 in (0.254 mm) D.A. Optional Ferrule brass Elastomer LORD or MEM Silicone or Natural rubber WITHOUT FERRULE Rated Load Rated Input Dynamic Axial Spring Rate lb kg in D.A. mm D.A. NR Natural Freq Ø (6.4) (9.3) (8.8) MGN00-* MGN00-* MGN00-* MGN00-* MEM MGS00-* (9.7) (9.) Ø (9.7) (9.4) Ø (4.7) FIGURE 2 PART DIMENSIONS WITH PLAIN FERRULE (.8) (.3).7.3 (4.3) (3.3) MGS00-* MGS00-* MGS00-* * When ordering, use the following in place of the (*): W = Without ferrule P = Includes plain ferrule (LORD p/n Y-879-B) Natural frequency at rated load and rated input. Io ferrule, recommended space dimensions for positive tightening are: Length = in (9.27 mm) O.D. = in (6.48 mm) Recommended support member plate dimensions: Thickness = in Diameter = in Break all sharp edges. = n n.4 (.4) Ø (4.83) (4.52) Ø.38 (9.7) (9.3) (8.8).7.3 (4.3) (3.3) 0. NR Ø (4.7) (.8) (.3) Frequency 7 LORD.COM Toll-Free: ASK LORD ( ) customer.support@lord.com
7 MGN/MGS002 SERIES to 4 lb (0.5 to.8 kg) : 0.0 in (0.254 mm) D.A. Optional Ferrule SAE steel, zinc plated Elastomer LORD or MEM Silicone or Natural rubber WITHOUT FERRULE Rated Load Rated Input Dynamic Axial Spring Rate lb kg in D.A. mm D.A. NR Natural Freq MGN002-* MGN002-* MGN002-* MGN002-* MEM MGS002-* MGS002-* MGS002-* MGS002-* * When ordering, use the following in place of the (*): W = Without ferrule T = Includes threaded ferrule (LORD p/n Y ) Natural frequency at rated load and rated input. Io ferrule, recommended space dimensions for positive tightening are: Length = in (9.27 mm) O.D. = in (6.48 mm) Recommended support member plate dimensions: Thickness = in Diameter = in Break all sharp edges. = n n (9.7) (9.) Ø.7.6 (6.4) Ø (4.7) (9.3) (8.8) (.8) (.3).7.3 (4.3) (3.3) FIGURE 2 PART DIMENSIONS WITH THREADED FERRULE 0. NR #6-32UNC-2B THD THRU (9.7) (9.).56 ACROSS FLATS (9.3) (8.8).7.3 (4.3) (3.3) (.8) (.3) Frequency Ø (4.7) Toll-Free: ASK LORD ( ) customer.support@lord.com LORD.COM 72
8 MGN/MGS003 SERIES to 2 lb (0.5 to 0.9 kg) : 0.05 in (0.38 mm) D.A. Ferrule SAE steel, zinc plated Elastomer LORD Silicone or Natural rubber WITHOUT FERRULE Ø (4.9) (3.8) (9.3) (8.8) Rated Load Rated Input Dynamic Axial Spring Rate lb kg in D.A. mm D.A. Natural Freq NR Ø (6.6) (6.48) (5.3) MGN003-* MGN003-* MGS003-* (.54) (.6) MGS003-* Ø (4.6) (4.) FIGURE 2 PART DIMENSIONS WITH PLAIN FERRULE #6-UNC-2B THRU THD (9.3) (8.8) (.52) (.32) * When ordering, use the following in place of the (*): W = Without ferrule P = Includes plain ferrule (LORD p/n Y ) T = Includes threaded ferrule (LORD p/n Y ) Natural frequency at rated load and rated input. Io ferrule, recommended space dimensions for positive tightening are: Length = in (9.27 mm) O.D. = 0.75 in (4.45 mm) Recommended support member plate dimensions: Thickness = in Diameter = in Break all sharp edges. = n n Ø.38 (9.7).25 (6.4).448 (.38) Ø (4.6) (4.) (.52) (.32) FIGURE 4 TRANSMISSIBILITY VS. FREQUENCY FIGURE 3 PART DIMENSIONS WITH THREADED FERRULE Ø (4.9) (3.8) (9.3) (8.8) Ø (6.6) (6.48) (5.3) 0. NR (.54) (.6) (.52) (.32).56 ACROSS FLATS 0.0 Ø (4.6) (4.) 0 00 Frequency 73 LORD.COM Toll-Free: ASK LORD ( ) customer.support@lord.com
9 MCB002 SERIES 0.75 lb (0.34 kg) 2 g Inner member 303 stainless steel, passivated Elastomer LORD Silicone MCB MCB (2.8) (2.3) (5.03) (4.78) MCB = n n (5.6) Ø (6.8) (6.4).04 R.02 (.0) (0.5) Ø.3.2 (3.3) (3.0) Ø (9.9) (9.4) NOTE: Install one per mounting location. FIGURE 2 INSTALLATION DRAWING SUPPORTED MEMBER Ø.25 (6.4) (2.6).93 (4.90) R.02 TYP (.5).062 (.57) SUPPORTING MEMBER TYPICAL INSTALLATION SHOWN UNDER NO LOAD ALL DIMENSIONS ARE REFERENCE Frequency NOTE: Install one per mounting location. Toll-Free: ASK LORD ( ) customer.support@lord.com LORD.COM 74
10 MCB003 SERIES.5 lb (0.68 kg) 2 g Inner member 303 stainless steel, passivated Elastomer LORD Silicone (2.3) (.8) Ø (4.0) (3.5) MCB MCB (6.38) (6.32) Ø (.4) (.9).3.29 (7.9) (7.4) R (.0) (0.5) MCB = n n Ø.2.9 (5.3) (4.8) NOTE: Install one per mounting location. FIGURE 2 INSTALLATION DRAWING SUPPORTED MEMBER.25 (3.7) R.04 TYP (.0) Ø.406 (.3).06 (.5).250 (6.35) SUPPORTING MEMBER 0. TYPICAL INSTALLATION SHOWN UNDER NO LOAD ALL DIMENSIONS ARE REFERENCE NOTE: Install one per mounting location Frequency 75 LORD.COM Toll-Free: ASK LORD ( ) customer.support@lord.com
11 MCB004 SERIES Maximum rated load per pair: lb (0.45 kg) Maximum dynamic input at resonance 2 g Inner member 304 stainless steel, passivated Elastomer LORD Silicone (PER PAIR) MCB R TYP.065 (2.4) (.65) MCB MCB = n n Ø (5.6) (4.90).035 R.005 (0.89) (0.3) (6.) (5.84) (4.9) (3.43) Ø (4.) (3.84) (.4) (0.89).025 R TYP.05 (0.64) (0.38) Ø (9.78) (9.52) (.8) (.5) NOTE: Install one per mounting location. FIGURE 2 INSTALLATION DRAWING SUPPORTED MEMBER Ø.375 (9.65) (.94) R.020 TYP (.5).20 (3.30) SUPPORTING MEMBER TYPICAL INSTALLATION SHOWN UNDER NO LOAD ALL DIMENSIONS ARE REFERENCE Frequency NOTE: Install one per mounting location. Toll-Free: ASK LORD ( ) customer.support@lord.com LORD.COM 76
12 MCB005 SERIES Maximum rated load per pair: lb (4.55 kg) 2 g Inner member 2024-T4 aluminum, chromate treated per MIL-DTL-554, Class A Elastomer LORD Silicone (PER PAIR) (5.97) (5.2) Ø (28.07) (27.30).075 R.045 (.9) (.4) per Pair MCB MCB MCB MCB (9.02) (8.26) Ø (2.2) (20.9) MCB MCB MCB MCB Ø (6.53) (6.38) MCB = n n NOTE: Install in pairs at each mounting location. FIGURE 2 INSTALLATION DRAWING SUPPORTED MEMBER.280 (7.) Ø.805 (20.45) R.060 TYP (.52).688 INSTALLED (7.48) SUPPORTING MEMBER 0. TYPICAL INSTALLATION SHOWN UNDER NO LOAD ALL DIMENSIONS ARE REFERENCE NOTE: Install in pairs at each mounting location Frequency 77 LORD.COM Toll-Free: ASK LORD ( ) customer.support@lord.com
13 MCB006 SERIES Maximum rated load per pair: 5 lb (2.27 kg) 2 g Inner member 2024-T4 aluminum, chromate treated per MIL-DTL-554, Class A Elastomer LORD Silicone (PER PAIR) per Pair MCB MCB MCB (9.02) (8.26) (5.97) (5.2) Ø (28.07) (27.30).075 R.045 (.9) (.4) MCB MCB MCB Ø (20.96) (20.9) MCB MCB MCB = n n Ø (6.53) (6.38) NOTE: Install in pairs at each mounting location. FIGURE 2 INSTALLATION DRAWING SUPPORTED MEMBER (7.) Ø.805 (20.45) R.060 TYP (.52).688 INSTALLED (7.48) SUPPORTING MEMBER TYPICAL INSTALLATION SHOWN UNDER NO LOAD ALL DIMENSIONS ARE REFERENCE Frequency NOTE: Install in pairs at each mounting location. Toll-Free: ASK LORD ( ) customer.support@lord.com LORD.COM 78
Handles Fixed and folding, with a large selection of profiles, positions, types, threads, materials and finishes.
Handles Fixed and folding, with a large selection of profiles, positions, types, threads, materials and finishes. Standoffs Round, hex, square, female, swage, male-female, hinged, anti-rotation and metric.
Clamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/33 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS
From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).
121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/30 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R
INCH-POUND 20 August 2009 SUPERSEDING MS24264P 6 February 2004 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new design for
GHz BGA SOCKET - direct mount, solderless
45.00±0.25 GHz BGA SOCKET - direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/59D 26 August 2010 SUPERSEDING MIL-DTL-83723/59D 29 June 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, (CIRCULAR, ENVIRONMENT RESISTING), PROTECTIVE COVERS, PLUGS, (FOR
CALL (512 ) x6400
The AirBorn stackable compliant connector family is one of AirBorn s solutions for high-density, board-to-board stacking applications. This connector family is available in 0.075 contact spacing and 100
Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED
Solutions Inc. PA-3500 Line Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED The DFCI PA-3500 Line of fasteners combine the operating convenience, predictable clamping
Series 791 Connectors
Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5
INTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS
N INTROUCTION The new Radiall N series has been developed using the latest advances in connector design. These connectors are easy--to--use, highly reliable, innovative and are designed to meet the needs
INSTALLATION INSTRUCTIONS 3 BULL BAR 99-04, 04 "HERITAGE" F-150/250LD 2WD, 97-04, 04 "HERITAGE" 4WD WD EXPEDITION/ WD EXPEDITION PART
INSTALLATION INSTRUCTIONS 3 BULL BAR PART #B-F1971;B-F2971 PARTS LIST: 1 Bull Bar 2 12-1.75mm x 130mm x 40mm Hex Bolts 1 Driver/Left Mounting Bracket 4 12-1.75mm x 35mm Hex Bolts 1 Passenger/Right Mounting
SELF-CLINCHING STUDS AND PINS
SELF-LINING S ND PINS F (flush-head) Studs are installed by placing them in punched or drilled holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head
CYLINDRICAL STUD MOUNT SERIES
CYLINDRICAL STUD MOUNT SERIES Features Reduce transmitted vibration from rotating or reciprocating machinery Reduce transmission of structureborne noise Available in a wide range of load ranges Sturdy,
WESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
MATERIAL & FINISH SPECIFICATIONS INSTALLATION. For Types FH, FHS, FHA, FHL, FHLS, TFH, TFHS, HFH, HFHB, HFHS and HFE studs
MTERIL & FINIS SPEIFITIONS s (1) Fastener Materials Standard Finishes Optional Finish (2) For use in Sheet ardness: External, Precipi- Zinc Per Zinc Per 50 or 55 or 70 or 80 or 85 or 92 or NSI 300 2024-T4
DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R
INCH-POUND MS24264T 1 December 2016 SUPERSEDING MS24264R 20 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, FLANGE MOUNTING, MINIATURE, CLASSES E, F, G AND R Inactive for new
Thread Repair & Thread Protection
Thread Repair & Thread Protection Screw Thread Inserts, Kits & Components for Industrial Maintenance, Repair and Overhaul Bulletin 998 C E R T I F I E D ISO 9001 AS 9100 TS 16949 ISO 14001 The HELI-COIL
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
3 db 90 Card Couplers
3 db 90 Card Couplers HD-M Series HD-0053M3-IH HD-0195M3-DH HD-0195M3-DH-1 HD-0900M3-CH-1 HD-0620M3-EH HD-1700M3-FH HD-3900M3-BH HD-0313M3-FH HD-2100M3-CH HD-1800M3-CH HD-3200M3-BH HD-6150M3-AH Features
INTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
Cable Railing Kit Application Guide
Cable Railing Kit Application Guide January 2019 Nationwide Industries 10333 Windhorst Rd. Tampa, FL 33619 813.988.2628 Fax: 813.988.3465 Photo courtesy of FabWorx Framework You Will Need for Cable Railing
10-1.5mm x 40mm Hex Bolt 1 Driver/Left Front Inner Support Bracket (2WD & 4WD Vehicles W/O Skid Plate Only) 2
PARTS LIST: 3" ROUND SIDEBARS 1 Driver/Left sidebar 4 12mm x 32mm OD x 3mm Flat Washer 1 Passenger/Right sidebar 4 12mm x 24mm OD x 2.5mm Flat Washer 1 Driver/Left Mounting Bracket 6 12mm Lock Washers
QUADSPLITTER AND IN-LINE QUADSPLITTER
QUADSPLITTER AND IN-LINE QUADSPLITTER technical characteristics specifications temperature rating: -55 c to + 5 c corrosion: MIL-STD-0 Method 0, Test Condition B shock: MIL-STD-0 Method, Test Condition
Passenger/Right Front Mounting Bracket
PARTS LIST: 1 Driver side running board 1 8mm Insert Installation Tool 1 Passenger side running board 4 10-1.50mm x 35mm Hex Bolt 1 Driver 10 10mm x 24mm OD x 2.2mm Flat Washer 1 Passenger 6 10mm Lock
DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, CABLE-CONNECTING, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P
INCH POUND MS3121E 19 October 2017 SUPERSEDING MS3121E 15 January 2015 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, CABLE-CONNECTING, BAYONET COUPLING, SERIES 1, CLASSES E, F AND
MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
![MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*](/thumbs/71/66171988.jpg "MODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*")
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
Techline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE
10-1.5mm x 40mm Hex Bolt 1 Driver/Left Front Inner Support Bracket (2WD & 4WD Vehicles W/O Skid Plate Only) 2
PARTS LIST: 1 Driver/Left sidebar 4 12mm x 32mm OD x 3mm Flat Washer 1 Passenger/Right sidebar 4 12mm x 24mm OD x 2.5mm Flat Washer 1 Driver/Left Mounting Bracket 6 12mm Lock Washers 1 Passenger/Right
High-speed connectors Wall-mount PC tail receptacle with threaded standoffs MIL-DTL Series III type
233-218 Wall-mount P tail receptacle with threaded standoffs Part Number Development Sample Part Number 233-218 00 M 17 E 02 S N Series / Basic Part No. onnector Style* SuperNine High-Speed P tail wall
TNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
NAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:
Size Grade Torque 9/ ft/lbs. 5/ ft/lbs. 3/ ft/lbs. 7/ ft/lbs ft/lbs.
8-3 HJ3205,Rev 4 BOlT TORQUE SPECIfICATIONS STANDARD BOlTS: Size Grade Torque 5/6 5 20 ft/lbs. 3/8 5 35 ft/lbs. 7/6 5 56 ft/lbs. /2 5 85 ft/lbs. Size Grade Torque 9/6 5 23 ft/lbs. 5/8 5 70 ft/lbs. 3/4
FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
Google Pixel DISASSEMBLE. PennEngineering
Google Pixel DISASSEMBLE June 4th, 2018 Allen Wang PennEngineering www.pemnet.com 1 Google Pixel Teardown www.pemnet.com 2 Details & Findings Pictures and Description of the Google Pixel and our disassembly
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
The ribbed L Rivet Nut Series features a large flange head configuration with a ribbed body.
The ribbed L Rivet Nut Series features a large flange head configuration with a ribbed body. RIBBED BODY The ribbed body provides increased resistance from spinning. LARGE HEAD Provides a large bearing
CABLE ASSEMBLY CATALOG
CABLE ASSEMBLY CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MILSPEC CONNECRS Milspecwest is known for Micro connectors. With many years of connector
BrydgeAir Keyboard for ipad Air
BrydgeAir Keyboard for ipad Air May 3 rd. 2016 by XiaoMing Chen & Larry Zhang PennEngineering 1 BrydgeAir Keyboard for ipad Air Overview 2 BrydgeAir Keyboard for ipad Air Details & Findings Pictures and
Nokia 6 Cellphone. PennEngineering. April 7th, 2017 Xiaoming Chen. 1
Nokia 6 Cellphone April 7th, 2017 Xiaoming Chen PennEngineering 1 Overview Nokia 6 has a 5.5-inch FHD IPS display with a polarizer film covered with 2.5D Gorilla Glass for protection. The smartphone comes
(2) 12mm x 40mm Bolt Plate (long) pictured w/plastic retainer. (6) 12mm x 40mm Bolt Plate (short) Support Bracket Driver/left Front
PARTS LIST: 1 Driver/left Running Board w-1 Backing 8 12mm Plastic Retainers 1 Passenger/right Running Board w-1 Backing 8 12mm x 32mm x 3mm Flat Washers 2 2 inch tall rubber backing (SX & Limited only)
Swivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
Fixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
Steel Casework Metal Framing System
MISCELLANEOUS ITEMS Continuous Slot Metal Framing System Installs quickly Completely adjustable Re-usable Eliminates all welding, drilling and use of special tools G23 METAL FRAMING SYSTEM 1. Place the
Wirewound Resistors, Military, MIL-PRF Qualified, Type RE, Aluminum Housed, Chassis Mount
Wirewound Resistors, Military, MIL-PRF-18546 Qualified, Type RE, Aluminum Housed, Chassis Mount STANDARD ELECTRICAL SPECIFICATIONS MILITARY VISHAY REFERENCE POWER RATING P 25 C W FEATURES Molded construction
TWIN ROD CYLINDERS 6 CONTENTS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG TWIN ROD CYLINDERS6 CONTENTS TWIN ROD CYLINDERS 6 Features 745 Specifications/Order Codes 747 Inner Construction and Major Parts 748 Dimensions
WALL SHELVING SYSTEM 250/750
468 2/7 Installation Example Ceiling Height (CH) : 2800 mm Ceiling Height (CH) : 28 mm Corner Installation 2 design panels are used to cover mm space in case of ceiling height 28 mm. Corner Example 469
Silver Ball Matrix BGA Socket
A1 corner 4.600 Silver Ball Matrix BGA Socket Features Wide temperature range (-55C to +0C). Current capability is 4A per pin. Over 40GHz bandwidth @-1dB for edge pins. Low and stable contact resistance
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
LYON INDUSTRIES. Since 1968
LYON INDUSTRIES The Shim Source Since 1968 Index Product Page No. Tool Wrap................................. 3 Slotted Shim Kits............................ 4 Stainless Steel Shim Stock..................
For All Your Perforated and Expanded Metal Needs
For All Your Perforated and Expanded Metal Needs Accurate Alloys, Inc. 5455 North Irwindale Avenue Irwindale, California 91706-2045 (626) 338-4012 (323) 231-4179 (800) 842-2222 FAX (626) 337-8393 E-Mail:
MIL-DTL-39030/3 SMA Terminations. Features & Benefits. Applications. M39030 /3-08 S or N
MIL-DTL-39030/3 SMA Terminations SV Microwave offers military SMA terminations that are 39030 approved. QPL-39030 parts are designed and made under DSCC qualifications in order to resist harsh environments
Disclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
Maverick Series Gigabit Ethernet, External TFOCA II *, 1000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm
Maverick Series Gigabit Ethernet, External TFOCA II *, 000Base-T / SX Media Converter, 28Vdc, Multimode, 850nm Single Port, Flange Receptacles FEATURES Compliant with IEEE-802.:2005 Gigabit Ethernet Optical
Chapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
FURNITURE LABORATORY METAL FRAMING SYSTEM. For additional information and help in planning contact Mott Manufacturing.
LABORATORY Continuous Slot Metal Framing System For additional information and help in planning contact Mott Manufacturing. G22 Connection Instructions Installs quickly Completely adjustable Re-usable
Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
ENGINEERING STANDARDS SECTION: D TOG-L-LOC V-LOC OVAL-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works
Tog-L-Loc Tog-L-Loc is a circular, leakproof joint formed by drawing the metals into a circular "cup'' and then expanding the diameter to form a 360 radial lock below the bottom sheet. How The Joining
Khathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
AEROSPACE & DEFENSE ISOLATOR CATALOG. Vibration, Shock & Motion Control Products. For Sensitive Equipment, Shipping Containers & Aircraft Interiors
AEROSPACE & DEFENSE ISOLATOR CATALOG Vibration, Shock & Motion Control Products For Sensitive Equipment, Shipping Containers & Aircraft Interiors LORD CORPORATION CAN HELP YOU SOLVE CONTROL PROBLEMS IN
CATALOG. AEROSPACE * MEDICAL * AUTOMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949)
CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MICRO CONNECR REFERENCE MILSPECWEST MICROTECH COMTRONICS DESCRIPTION MSW-G-B-02S-040* DP-2S-1 CMR-O2-B-02S
K/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
Ledex Tubular Linear Solenoids
Ledex Tubular Linear Solenoids Force lbs. (newtons) 10 (.) (35.5) 6 (6.69) (17.79) 10% Duty Cycle 70W 5% Duty Cycle W 50% Duty Cycle 1W 100% Duty Cycle 7W saia-burgess Solenoids 1-00-99-9 www.saia-burgess-usa.com/ledex
Quarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
Features. Description: SG-MLF Socket for 8x8mm. Recommended torque = 1.25 lbf-in. (14.1 N-cm) SG-MLF-7007 Drawing
GHz MLF Socket - Direct mount, solderless Features Directly mounts to target PCB (needs tooling holes) with hardware High speed reliable elastomer connection Minimum real estate required Compression plate
DETAIL SPECIFICATION SHEET INSERT, SCREW THREAD, LOCKED IN, KEY-LOCKED, MINIATURE AND LIGHTWEIGHT
INCH-POUND DETAIL SPECIFICATION SHEET MS51830F 14 November 2012 SUPERSEDING MS51830F 21 June 2012 INSERT, SCREW THREAD, LOCKED IN, KEY-LOCKED, MINIATURE AND LIGHTWEIGHT This specification is approved for
MTS-ACB. RENOGY Photovoltaic Module Adjustable Curved Bracket E Philadelphia St, Ontario, CA Version: 1.
MTS-ACB RENOGY Photovoltaic Module Adjustable Curved Bracket 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS
PIEDMONT PACIFIC CORPORATION INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS 4703 Tidewater Ave., Suite G Oakland. CA, 94601, USA Ph: +1 510 434 0990 / Fax: +1 510 436 0990 www.piedmontpacific.com
Thru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
RF & MW Connectors. 6 Where signal & Connectivity is needed, There is GigaLane
RF & MW Connectors - 2.4 mm Connectors - 2.92 mm Connectors - Hermetic Seal (0.012 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors
ENGINEERING STANDARDS SECTION: TOG-L-LOC V-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works
Tog-L-Loc Tog-L-Loc is a circular, leakproof joint formed by drawing the metals into a circular "cup'' and then expanding the diameter to form a 360 radial lock below the bottom sheet. How The Joining
CABLE ASSEMBLY CATALOG
CABLE ASSEMBLY CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MILSPEC CONNECRS Milspecwest is known for Micro connectors. With many years of connector
SECTION 12. N / Composite N / N 18 GHz R161 / R162 / R163
SECTION 12 12 N / Composite N / N 18 GHz R161 / R162 / R163 Contents Introduction... 12-4 to 12-5 N 50Ω and Composite N Interface... 12-6 Characteristics... 12-8 to 12-9 ECO N characteristics... 12-9
DEFENSE LOGISTICS AGENCY LAND AND MARITIME P.O. BOX 3990 COLUMBUS, OHIO
DEFENSE LOGISTICS AGENCY LAND AND MARITIME P.O. BOX 3990 COLUMBUS, OHIO 43218-3990 February 5, 2019 MEMORANDUM FOR MILITARY/INDUSTRY DISTRIBUTION SUBJECT: Initial Drafts of: MIL-DTL-13444, MS52103, and
MTS-ZB. RENOGY Photovoltaic Module Z-Bracket Mounting System E Philadelphia St, Ontario, CA Version: 1.
MTS-ZB RENOGY Photovoltaic Module Z-Bracket Mounting System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
GHz BGA Socket - Direct mount, solderless
GHz BGA Socket - Direct mount, solderless Features 10.625 14.500 Directly mounts to target PCB (needs tooling holes) with hardware High speed, reliable Elastomer connection Minimum real estate required
TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
flexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
1/4 Turn Fastener - Black Painted Zinc 1/4 Turn Fastener - Stainless Steel 1/4 Turn Cam,.649 Offset - Zinc
ACCESSORIES Y001721 Y001722 Y001723 Y001724 Y001725 Y001726 Y001160 Y001363 Y001442 Y001184 Y002192 Y002193 PART NUMBER Y001721 Y001722 Y001723 Y001724 Y001725 Y001726 Y001160 Y001363 Y001442 Y001184 Y002192
Wire Inserts. Wire Inserts
Insert Systems Wire Inserts Wire Inserts Heli-Coil precision formed wire inserts are readily recognized and highly regarded products in the industry. Since its inception in 1938, Heli-Coil has been identified
SECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS. Web. acrylicdesign.ie .
Section 11 CABLE & ROD SYSTEMS, SIGN FIXING & SIGN STANDOFFS Web. acrylicdesign.ie Email. sales@acrylicdesign.ie Acrylic Design 2004-2015 Mobile Cable System Components Single panel clamp Stand Off for
NPA. Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts. New Product Announcement. Page 1 / 9
NPA Expansion of the HM390 Triangular Inserts Line with Tools Carrying 5 mm Edged Inserts Page 1 / 9 Page 2 / 9 Highlights Tools carrying triangular inserts with 5 mm helical cutting edges Effective and
C-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
22 22, 24, , 18, AWG. 50 ohm 50 ohm. 75 ohm 75 ohm. 95 ohm 95 ohm
ircular onnectors MR 4 Series onnectors General Information high density (.080 [2.0] contact centers), lightweight, subminiature, cylindrical connector series featuring crimp contacts and fingertip, push-pull,
BOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
Creating the Future Worldwide.
Insert Systems At Emhart, creating the future is about growth, about change and about taking risks. It is who we are and what we do. Our focus is to reduce the overall product assembly costs of our customers
Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
Obsolete fastener specialist
Obsolete fastener specialist CLASSIC FASTENERS was established circa 1988 to supply 'obsolete' and just plain hard to get fasteners to restorers of automobiles and motorcycles via a mail order service.
Visit our web site:
Compliance and Applications ICAO Annex NATO STANAG BS: Part, inset fixtures IEC: Category I, II and III all weather operation airfield lighting systems. Our ZA medium intensity, omnidirectional fixture
High-Reliability and Environment Qualified Components
High-Reliability and Environment Qualified Components Introduction Ruggedness and reliability have been designed in across our product lines and proven in the field. This section of our catalog provides
General Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................