Clamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
|
|
- Jeremy Boyd
- 5 years ago
- Views:
Transcription
1 DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRL KP d PP HRZ = Standard Duty Twin (Ribbed Profile) HRGZ = Standard Duty Twin (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum HRZ KP d-d PP HREL & HRES Clamps with Rubber Inserts KP HRES /L KP PP HREL, HRES Size Clamp Pair Material PP = Polypropylene PA = Polyamide EE HRES / L EE d * HREL, HRES Size Rubber Insert ore Diameter (mm) Material TPE 7 = Santoprene TPE 7 NR = Nitrile (una) TPE7 *HREL series use the same rubber inserts as the HRES series, therefore the model code for them is HRES. Note: All other components for these clamps are the same as for HRL series standard duty single clamps. Refer to page - to -8 for details. PN#00800 / 0.7 / ACC0-7 -7
2 DIN 0 CLAMPS HRL, HRS, & HRZ Parts C-Rail Nuts (UNC Threads) Carbon Steel, Zinc Plated Stainless Steel Size Model Code Model Code 0 HRL 7 8 HRL 0- TM/ UNC ST ZN HRL 0- TM / UNC A HRS HRS - TM/8 UNC ST ZN HRS - TM/8 UNC A HRS TM7/ UNC ST ZN HRS TM7/ UNC A HRL 0- TM/ UNC ST ZN HRL 0- TM/ UNC A HRZ HRZ - TM/ UNC ST ZN HRZ - TM/ UNC A (METRIC Threads) Carbon Steel, Zinc Plated Stainless Steel Size Model Code Model Code 0 HRL 7 8 HRL 0- TM M ST ZN HRL 0- TM M A HRS HRS - TM0 M ST ZN HRS - TM0 M A HRS TM M ST ZN HRS TM M A HRL 0- TM M ST ZN HRL 0- TM M A HRZ HRZ - TM8 M ST ZN HRZ - TM8 M A C-Rail -8 Carbon Steel,Phosphate Coated Stainless Steel Size Model Code Model Code HRL M HRL TS 8X ST L M HRL TS 8X A M M HRL TS 8X ST L M HRL TS 8X A M HRS M HRS TS 0X ST L M HRS TS 0X A M M HRS TS 0X ST L M HRS TS 0X A M HRZ M HRL TS 8X ST L M HRL TS 8X A M M HRL TS 8X ST L M HRL TS 8X A M PN#00800 / 0.7 / ACC0-7
3 HRL & HRS with Stainless Steel Metal Components HRL Standard Duty HRS Heavy Duty Clamps with stainless steel metal components are available for corrosive environments. Our complete line of DIN 0 clamps are available in stainless steel. Some models are special order, which may require minimum quantities, and/or extended delivery times. Listed here are the standard duty and heavy duty single clamps with weld plate. 0 Stainless Steel: (A) Available from stock UNC bolts Stainless Steel: (A) Salt water resistance HRL sizes - in UNC - available from stock HRS sizes - in UNC Larger sizes in metric only Typical Arrangement Single Clamp with Weld Plate (HRL...A...) for Standard Duty (HRS...S...) for Heavy Duty Hex Head olts (SCREW H) Top Plate (DP) Clamp Pair (KP) Weld Plate (AP) C-Rail Nuts (TM) DIN 0 CLAMPS Stainless Steel UNC Stocked Program Light Duty (HRL) Size Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws Screw H /-0 x. SS Screw H /-0 x.0 SS Screw H /-0 x.0 SS Screw H /-0 x.7 SS Screw H /-0 x.0 SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page - for available bore sizes Heavy Duty (HRS) Size Model Code Part Number Arrangements (complete with PP clamp pair) HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC HRS S XX PP A UNC Weld Plates HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC HRS AP A UNC Top Plates HRS DP A HRS DP A HRS DP A HRS DP A HRS DP A Ext Hex Screws Screw H /8-x.7 SS Screw H /8-x. SS Screw H /8-x.7 SS Screw H /8-x.00 SS Screw H /8-x. SS XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRS clamps on page -7 for available bore sizes C-Rail (TS) PN#00800 / 0.7 / ACC0-7 -9
4 DIN 0 CLAMPS HRL Standard Duty 0 stainless steel (A) metal components Size Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC HRL A XX PP A UNC XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page - for available bore sizes. Weld Plates HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC HRL AP A UNC Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Ext Hex Screws ( Stainless Steel) SCREW H /-0 x. SS SCREW H /-0 x.0 SS SCREW H /-0 x.0 SS SCREW H /-0 x.7 SS SCREW H /-0 x.0 SS SCREW H /-0 x.7 SS HRL C-Rail HRL TS 8 x A M 009 HRL C-Rail Nuts HRL 0- TM / UNC A 0070 stainless steel (A) metal components (metric) Size Model Code Part Number Arrangements (complete with PP clamp pair) HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M HRL A XX PP A M Weld Plates (metric thread) HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M HRL AP A M Top Plates HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A HRL DP A Hex Head olts SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX A SCREW H MX0 A SCREW H MX70 A XX = bore diameter A unique part number exists for each individual clamp bore diameter. A complete model code is sufficient for ordering. Use the dimensions table for standard HRL clamps on page - for available bore sizes HRS Heavy Duty stainless steel (A) metal components (metric) Size Model Code Part Number Arrangements (complete with PP clamp pair) XX = bore diameter HRS S XX PP A M A unique part number exists HRS S XX PP A M for each individual clamp bore HRS S XX PP A M diameter. A complete model HRS S XX PP A M code is sufficient for ordering. HRS S XX PP A M Use the dimensions table for HRS S XX PP A M standard HRS clamps on page -7 for available bore sizes. Weld Plates (metric thread) HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M HRS AP A M Top Plates HRS DP A 0008 HRS DP A 0009 HRS DP A 0000 HRS DP A 000 HRS DP A 000 HRS DP A 000 Hex Head olts (metric) SCREW H M0X A SCREW H M0X0 A SCREW H M0X70 A SCREW H MX00 A SCREW H MX0 A SCREW H M0X90 A HRS C-Rail HRS TS 0X A M 009 HRS C-Rail Nuts HRS TM 0 A M HRS TM A M PN#00800 / 0.7 / ACC0-7
5 STANDARD CLAMPS Standard Clamps In addition to the DIN 0 Clamps HYDAC offers other standard products that assure a simple, reliable dampening support for lines which absorb shock, dampen vibration, and reduce noise in plumbing systems. Please contact HYDAC to discuss what product is right for you and your application. PN#00800 / 0.7 / ACC0-7 -
6 STANDARD CLAMPS HOM Flat Cushion Clamps F The interlock edge insures that the cushion remains in place. The HOM clamp assembly retains, guides, protects and uniformly spaces line runs. They go up fast, lines are rigid, and look neat. Features Attached with two standard* fasteners to any flat surface, the HOM clamp eliminates the use of special channels, providing savings in both space and cost. Low profile for limited space applications. The Clamp Available in steel (with electro-dichromate finish), and 0 stainless steel (A in the model code denotes 0 stainless steel). The Cushion Manufactured from a thermoplastic elastomer, it s built tough to withstand the effects of most oils, chemical and industrial cleaning compounds, in temperatures from -0 F to 7 F. *Note: Fasteners not provided. Model Code HOM (Refer to table) Application T = Tube P = Pipe Metal Components (omit) = Carbon Steel A = 0 Stainless Steel - HOM / T - D E C A / Application Tube O.D. Pipe A C D E F / / / / / / / / / / / / / / / / / / / / / / Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. PN#00800 / 0.7 / ACC0-7
7 CUSH Cushion Clamps STANDARD CLAMPS /8 7/8 øa C /8 7/8 / Cushion clamps are ideal for multiple line runs, while absorbing shock and vibration, reducing unwanted noise and preventing galvanic corrosion. Features Distortion free clamping Shock and vibration reduction Elimination of rotation Retrofit without disassembly Easy installation Control squeeze shoulder bolt prevents over tightening of the clamp assembly, preventing the possibility of crushing the tube. Fits standard -/8 wide mounting rail Clamp - carbon steel (with electro-dichromate finish) Cushion - thermoplastic elastomer Cushion material withstands the effect of most oils, chemicals and industrial cleaning solvents at temperatures -0 to 7 F. Mounting Rail Part Number: 007 Model Code: Cush Rail x Galvanized Material: Low gauge carbon steel Finish: Galvanized Length: Clamp - Stainless steel 0 Cushion - thermoplastic elastomer Mounting Rail Part Number: Model Code: Cush Rail / x 0 A Cush Rail x Material: Stainless steel 0 Galvanized Steel Length: 0 0 Model Code CUSH (Refer to table) Application T = Tube P = Pipe Metal Components (omit) = Carbon Steel A = 0 Stainless Steel PN#00800 / 0.7 / ACC0-7 CUSH / T - / Application Tube O.D. Pipe A C / / / / / / / / / / / / / / / / / / / / / / / / / / / / /.. -/ / / / / Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. -
8 STANDARD CLAMPS HRGS uegu Clamps Part Legend A - uegu Clamp with Weld Plate. Hex Head olt uegu clamps are ideal for mobile applications where space is limited. They absorb shock and vibration, and reduce noise. Features Low Profile Design Shock and vibration reduction Easy installation Stirrup & Weld Plate - carbon steel Clamp ody - thermoplastic elastomer (Santoprene TPE 7) Temp Specifications -0 to 7 F (-0 to C). Stirrup. Sleeve. Rubber ody. Weld Plate Part Legend. Hex Head olt. Stirrup A - uegu Clamp without Weld Plate Model Code HRGS A D-D ST M HRGS 0A - (Refer to table) Application A = uegu clamp with top plate & weld plate A = uegu clamp without weld plate ATM = C-rail mounted uegu clamp ore Size (Refer to table) Metal Components (omit) = Carbon Steel A = 0 Stainless Steel Thread Type M = Metric. Sleeve. Rubber ody Part Legend. Hex Head olt. Stirrup. Sleeve. Rubber ody ATM - uegu Clamp - C-Rail Mounted. C-Rail Nut. C-Rail - PN#00800 / 0.7 / ACC0-7
9 HRGS STANDARD CLAMPS Slotted C 0. () 0. (9) A ød H H 0. () Plastic Cap 0.9 (.) 0.9 (0) 0.9 () ød 0. () ød H H 0.0 () 0.08 () 0. () 0.9 (ø0) A A 0. () 0. (). (8) Tube O.D. Pipe Size 0A 0 0C PN#00800 / 0.7 / ACC0-7 / - 0. (.) - /8-0.7 (9.) - - /8 0.9 (0.0) - / - 0. (.7) - - / 0. (.7) - /8-0. (.0) - - /8 0.7 (7.) - / (9.0) - - / 0.8 (.) (.) - -/ -. (.0) - / - 0. (.) 0. (.) /8-0.7 (9.) 0.7 (9.) - /8 0.9 (0.0) 0.9 (0.0) / - 0. (.7) 0. (.7) /8-0. (.0) 0. (.0) - /8 0.7 (7.) 0.7 (7.) / (9.0) 0.7 (9.0) - / 0.8 (.) 0.8 (.) -.0 (.).0 (.) -/ -.0 (.0). (.0) ore Diameter* olt Size C ød ød A A H H 0. (). () 0.9 (0) 0.9 () 0.7 (8). (9) 0.7 ().0 (7) 0.9 (.). (7.).8 (0).97 (0) 0.9 (0) 0.9 ().8 (). (9) 0.7 ().0 (7) * Consult factory for sizes and with different bore diameters. Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print (0) M X 0.78 (0).9 ().8 (0) M8 X 0.78 (0) M X.8 (7).9 (8) 0.78 (0).9 ().8 (0) M8 X -
10 STANDARD CLAMPS HRRS U-olt Clamps Model Code HRRS Family Group - (Refer to table) Model HRRS 0 L 9.7 PP ST ZN (Refer to table) Clamp Material PP = Polypropylene (Standard) PA = Polyamide Metal Component Material ST = Carbon Steel A = 0 Stainless Steel A = Stainless Steel Material Finish Zn = Zinc Plated H Pipe ø A H H U-bolt clamps are a simple solution for securing pipes and other cylindrical objects. The clamps consist of a threaded U and a contoured saddle. Pipe ø D E L Features Metric Threads Easy installation H A Threaded U - zinc-plated carbon steel Saddle - polypropylene D E L H H - Group Pipe Size øa D E H H H L 0.7 (7.) 0.8 (.) /8 (9.) / (.7) 0.9 (). (). (). (0) 0.98 ().7 (0).0 (.9) / (9.).8 (0).7 (0).7 (70).9 (7) M0. (.7) (.). (8).89 (8).9 (7). (80).8 (0).7 (.) -/ (.8).8 (). ().9 (8). (90).97 (0).9 (8.) -/ (8.).0 (). (). (9).7 (9).7 (0.) (0.8). ().99 (7).9 (09). (0).8 () 7 (7.) -. (8). (0) M.7 (9).9 (). () 8. (88.9) (7.).7 (9).7 (0). (8).7 () 9. (.) (0.).7 (0). ().7 (7) 7.8 (90) 0. (9.7) (7).8 (8). () 7. (9) 8. (0). (80) M. (8.) (.).9 (7) 7. (9) 8. (7) 9.8 (0) 7. (9.7) 7 (77.8) 7.9 (0) 8.8 (8) 9.8 (9) 0. (70) 8. (9.) 8 (0.) 8.98 (8) 9.7 (8). (8). () 0.7 (7) 0 (). (8) M0.89 (0). ().7 (70).7 (.9) (0.8).07 ().8 (). (8). (0).9 (00) (.) (.).88 (78).8 (0) 7. () 8.9 (80) 7 (0.) (0.).8 (8) M 7.8 () 9.7 (87). (0) 8 0 (08) 0 (08) 0.87 (0).8 ().9 (89). (0) 9.97 (8) (8.8). (70). (00).9 (0) 7. (700) 0.98 (09) (09.).9 ().7 () 7. (700) 9. (70).98 (0) (0.).77 (80).9 (0) M0 7.9 (70) 9.9 (70).89 (80) 7.99 (7) 8 (7.) 8.7 (70) 9.9 (70).89 (80). (870) 0 (7) 0 (7) 0.9 (78).09 (8). (870).8 (90) Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print..77 ().97 (0). (0).7 (70) PN#00800 / 0.7 / ACC0-7
11 HU U-olt with Cushion Clamps STANDARD CLAMPS Designed for the tough jobs, the HU secures pipe runs to any flat surface. The U-olt traps and secures the cushion in place to prevent lateral movement, while nylon insert locknuts provide a positive lock. Features The cushion design provides total load distribution, allowing the U-olt to become a full contact hanger, eliminating knife-edge loading. Extremely cost effective, especially in larger sizes. U-olt - Steel with electro-galvanized finish or stainless steel* Cushion - Thermoplastic elastomer, rated from -0 to 7 F A D E Model Code HU (Refer to table) Application P = Pipe Metal Components (omit) = Carbon Steel A = Stainless Steel PN#00800 / 0.7 / ACC0-7 HU / P - Clamp Size G Pipe Size C øa C D E F G / / / / /-0 UNC / -/ / -/ /8- UNC / -/ / -/ /- UNC / UNC / UNC- Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. F -7
12 STANDARD CLAMPS HROS Oval Clamps Size 0 A ød ø. A Size - A ød Oval clamps are ideal for mobile applications where space is limited. One-piece, hinged polypropylene clamp body. H Features Low profile design Easy installation ød A ø.. PP - Polypropylene (standard) PA or others may be available Temp Specifications Polypropylene: - to 9 F (-0 to 90 C) Polyamide: 0 to 8 F (-0 to 0 C) Model Code HROS 0A to (Refer to table) Clamp ody ore Diameter (in/mm) (Refer to table) Clamp Material PP = Polypropylene PA = Polyamide -8 HROS KP PP Nominal Clamp ød & ød Size Size ore Size* Tube O.D. Pipe A A H 0A 0. (.0) (.) / - (9) (.8) (7) (8.0) / (.) - (8) () 0. (8.0) / (9.) / () (7.) (7) 0.9 (0.0) (0.) - /8 (8.) 0.7 (.0) () (0.) (.7) / (0.0) - - 0C 0.0 (0.) - / (.0) - - () (.) (7) 0.0 (.7) / (.) - / (.) 0. (.0) (.0) - - (0) (.) - 0. (.0) /8-0. (.0) (.0) - - 0D 0. (.0) / (7.) - /8 (9) (0) () 0.7 (8.0) (9.0) / -. (0.) 0.79 (0.0) (.) - / 0.87 (.0) 7/ (8) (8.) (.0) (.) - * D and D dimensions may have different bore sizes. listed are standard. Notes:. are in inches (mm).. are for general information only, all critical dimensions should be verified by requesting a certified print. PN#00800 / 0.7 / ACC0-7
Techline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationComponents: Dimensions / Order Codes
Heavy Twin Series Components: Dimensions / Clamp Body Profiled Design Profiled Inside Surface with Tension Clearance Clamp Body Standard Materials Polypropylene Colour: Green Material code: PP Polyamide
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationAccessories for sensors
Accessories for sensors Mounting and installation Adapters for pressure sensors: Hex AF width 27 ZBM 01 Adapter female thread G1/4 male thread G1/2 B, DIN EN 837-1 Part no.: 257276 Flat seal ring Cu 6.2x17.5x2.0
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationFIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
More informationLF (Large Flange) Fittings - Adapters. (505)
LF (Large ) Fittings - dapters www.idealvac.com (505)72-007 Vacuum Fittings - dapters - olt Sets LF (Large ) ISO NW LF Specifications Max. Positive Pressure over pressure centering ring 0 psig Torque Rating
More informationAssembly and Installation Manual Pontoon Bunk & Side Guide Kit for 4000/5000 Vertical LIFT MCD p/n
Assembly and Installation Manual Pontoon Bunk & Side Guide Kit for 4000/5000 Vertical LIFT MCD p/n 1547-01 A. Intended Use The Metal Craft Pontoon Bunk and Side Guide Kit are intended for pontoon boats
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More information10-1.5mm x 40mm Hex Bolt 1 Driver/Left Front Inner Support Bracket (2WD & 4WD Vehicles W/O Skid Plate Only) 2
PARTS LIST: 1 Driver/Left sidebar 4 12mm x 32mm OD x 3mm Flat Washer 1 Passenger/Right sidebar 4 12mm x 24mm OD x 2.5mm Flat Washer 1 Driver/Left Mounting Bracket 6 12mm Lock Washers 1 Passenger/Right
More informationINSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More information01 FASTENERS JULY FASTENERS 1
01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors
More informationMetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
More informationSuperstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationINSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
More information3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
More information(2) 12mm x 40mm Bolt Plate (long) pictured w/plastic retainer. (6) 12mm x 40mm Bolt Plate (short) Support Bracket Driver/left Front
PARTS LIST: 1 Driver/left Running Board w-1 Backing 8 12mm Plastic Retainers 1 Passenger/right Running Board w-1 Backing 8 12mm x 32mm x 3mm Flat Washers 2 2 inch tall rubber backing (SX & Limited only)
More informationSIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationH HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT
Page 1 IMPORTANT PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
More informationUP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More informationINSTALLATION INSTRUCTIONS / DODGE RAM CREW CAB 2500/3500
INSTALLATION INSTRUCTIONS 225019 / 225019-2 2010 DODGE RAM CREW CAB 2500/3500 PARTS LIST: Qty Description Qty Description 1 Driver/Left Side Bar 4 Plastic Square Retainer 1 Side Bar 2 12mm x 120mm Hex
More informationENGINEERING STANDARDS SECTION: D TOG-L-LOC V-LOC OVAL-LOC LANCE-N-LOC INFORMATION. Tog-L-Loc. How The Joining Process Works
Tog-L-Loc Tog-L-Loc is a circular, leakproof joint formed by drawing the metals into a circular "cup'' and then expanding the diameter to form a 360 radial lock below the bottom sheet. How The Joining
More informationSIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
More informationSection 4 Panels & Doors
Contents Section 4 101-10 Rolling Door Profile 110 Wire Mesh 101 Sliding Door Profiles 111 Sliding Door Set 114 Sliding Door Guide 115 Panel Mounting Blocks 103-106 Bifold Door Glide 11-113 Mesh Retainers
More informationUP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
More information10-1.5mm x 40mm Hex Bolt 1 Driver/Left Front Inner Support Bracket (2WD & 4WD Vehicles W/O Skid Plate Only) 2
PARTS LIST: 3" ROUND SIDEBARS 1 Driver/Left sidebar 4 12mm x 32mm OD x 3mm Flat Washer 1 Passenger/Right sidebar 4 12mm x 24mm OD x 2.5mm Flat Washer 1 Driver/Left Mounting Bracket 6 12mm Lock Washers
More informationINSTALLATION INSTRUCTIONS 6 OVAL BENT END SIDEBARS DODGE RAM 1500, CREW CAB PART#: /241533B
PARTS LIST: 1 Driver/Left Sidebar 24 8mm x 24mm x 2mm Flat Washers 1 Passenger/Right Sidebar 12 8mm Lock Washers 3 Driver/left, Passenger Center and Rear 6 8mm Hex Nuts 3 INSTALLATION INSTRUCTIONS 6 OVAL
More informationPanels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
More informationLOC ATING COMPONENTS. Locating Components
Adjustable Jack Screws... 212 Adjustable Locating Buttons... 212 Alloy Steel Pull Dowel Pins...198 199 Bullet Nose Dowels... 219 Bullet Nose Pins... 220 Drift Handles... 213 Fixture Jacks... 212 Fixture
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationClamps. Preformed Clamping Systems. Clamps. Band-It. Band-It
Preformed Clamping Systems As industrial hose made of stiffer, thinner, thermoplastics replace soft, spongy, thickwalled rubber, a new generation of hose clamps has been developed to prevent leak problems.
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationACCESSORIES ACCESSORIES ACCESSORIES FASTENERS & TOOLS NAME PLATES PLASTIC ANGLES & COVERS BOARDS & SHEETS ADJUSTER METAL JOINTS PIPES PLASTIC JOINTS
ADJUSTERS AM-3030PS P/ADJUSTER M10 SMALL AM-3050PL P/ADJUSTER M10 LARGE AR-3212SS 32g/ea ADJUSTER AR-5012LS 31g/ea ADJUSTER 84g/ea 47 1 84g/ea CN-3010MS STEEL CAP NUT M10 CN-3010MP PLASTIC CAP NUT M10
More informationVIEWPOINT ALUMINUM RUNNING BOARD TOYOTA RAV4
PARTS LIST: VIEWPOINT ALUMINUM RUNNING BOARD 1 Driver/Left Running Board 4 10-1.5mm x 50mm T-Bolt 1 Passenger/Right Running Board 12 10mm Plastic Retainers 1 Driver/Left Bracket 2 10-1.50mm x 40mm Hex
More informationFASTENERS FIRST LOOSEN WITHOUT TURNING!
FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first
More informationA Profiles. Extrusions/Fasteners. Dimensional Data. Part No. TSV4040. Part No. TSL4040. Part No. TSV4080
Contents Extrusions/Fasteners... 1-11 Enclosure/Gurarding Accessories... 12-30 Floor Accessories... 31-36 ParGlide Linear Motion... 37-45 Machining Services... 46-55 1 Extrusions/Fasteners Dimensional
More informationSTEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
More informationPIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
More informationDisclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
More informationGRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:
PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers
More informationUP139 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 AN
UP39 CRUISE-A-LONG (STANDARD) NATURAL COATED DECK COATED RAMP DESCRIPTION SQUIRREL PANEL BACK WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL 90 ANGLE BRACKET TUBE BRACKET TUBE WARNING LABEL PLATE HARDWARE
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationMINIATURE MOUNTS MAA SERIES, MGN/MGS SERIES, MCB SERIES STANDARDIZED SOLUTIONS FOR LIGHTWEIGHT ELECTRONIC EQUIPMENT
MAA SERIES, MGN/MGS SERIES, MCB SERIES STANDARDIZED SOLUTIONS FOR LIGHTWEIGHT ELECTRONIC EQUIPMENT The Miniature Mount Series offer standardized solutions drawn from broad experience in the design of space
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationFRONT BUMPER INSTALLATION INSTRUCTIONS Toyota 4Runner
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2003-2009 Toyota 4Runner Please read before beginning Stainless steel hardware may bind
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationINSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls
INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls James C. White Company, Inc. Greenville, SC PAGE 5 Standard Instrument Stands SINGLE WALL STAND
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationThe Multi-Clamp System
Multi-Clamp The Multi-Clamp Multi-Clamp The MULTI-CLAMP SYSTEM enables you to route single line runs, multiple runs of the same line diameters, or multiple runs of various diameters. Multiple line runs
More informationUP133 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CL
UP33 CRAWL & TODDLE (STANDARD) NATURAL COATED DECK COATED RAMP FRONT WALL BACK WALL DESCRIPTION COATED STEPS 90 ANGLE BRACKET LEFT WALL RIGHT WALL CLEAR BUBBLE CRUISE RAIL SQUARE SPIRAL WHEEL TRIANGLE
More informationTaper Bushing Installation
Taper Installation IMPORTNT NOTE: Please follow the instructions on this sheet in order for the Martin bushing to perform satisfactorily. INSTLLTION 1. Clean all oil, dirt, and paint from shaft, bushing
More information8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationSteel City Comparison & Strategy. vs. T&B Liquidtight Fittings. Andrea Briggs. Associate Product Manager - Conduit & Fittings FOR INTERNAL USE ONLY
Comparison & Strategy Andrea Briggs Associate Product Manager - Conduit & Fittings Liquidtight Fitting Brand Strategy Component Comparisons Summary Liquidtight Fitting Brand Strategy Steel City Liquidtight
More informationNON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PROTRAXX OVAL STEP BAR APPLICATION: 2009-2017 Dodge Ram 1500 Crew/Quad Cab 2010-2017 Dodge Ram 2500/500 Crew Cab PART NUMBER: 21-550, 21-555, 21-50, 21-55 AUTOMOTIVE PRODUCTS,
More informationT360. Holders and Inserts - T-Cap. Features T333. Holders T335. Inserts T336. Clamping units T337. Sleeves for clamping units T338.
T358 T329 Holders and Inserts - T-Cap Features Holders Inserts Clamping units Sleeves for clamping units T-CAP Kits T333 T335 T336 T337 T338 T339 User Guide Comparison test results Surface finish Tool
More informationProduct Art.no. Ø Wall thickness Meter per mm mm bundle
Chrome Plated Tubes Direct plated finishes on welded steel tubes manufactured to DIN 2394. Only the very best quality of surface finish steel is used in the production of our tube. Product Art.no. Ø Wall
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationThe DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly.
The DeltaGrip System Safety and Operating Instructions Trigger Air Supply Connection Handle Assembly Air Line Assembly Punch Die Pneumatic Diaphragm Assembly Shackle, Pin & Jam Nut Jaw Frame Shoulder Screw
More information(W) INSTALLATION INSTRUCTIONS 3" ROUND & 4" OVAL SIDEBAR (90-DEG BENT END) DODGE RAM 1500 QUAD CAB PART #DZ /DZ /DZ /DZ
(W) INSTALLATION INSTRUCTIONS 3" ROUND & 4" OVAL SIDEBAR (90-DEG BENT END) PART #DZ 372231/DZ 372233/DZ 372237/DZ 372239 PARTS LIST: 3" ROUND & 4" OVAL SIDEBAR (90-DEG BENT END) Qty Description Qty Description
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationMETAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS. Value through the Roof.
METAL-TO-WOOD FASTENERS QUIKGRIP METAL2WOOD METAL2WOOD HD METAL2WOOD XD LOPRO 300SS Value through the Roof. Proven Performance. Huge Selection. Marco Quality. Value drives everything we do. That s why
More informationTHE CASCADE & SLINGER FUNSLIDES
THE CASCADE & SLINGER FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH CASCADE TM & SLINGER TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND
More informationMATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997
MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights
More informationPSI COMPAKT SEALS AND WALL SLEEVES WITH FIXED/LOOSE FLANGE
PSI COMPAKT SEALS AND WALL SLEEVES WITH FIXED/LOOSE FLANGE IN GALVANIZED OR STAINLESS STEEL FOR BUILDINGS WITH OR WITHOUT SEALING SHEETS IN SPLIT VERSION FOR RETROFITTING WWW.PSI-PRODUCTS.COM 37 GENERAL
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationNORTH AMERICA ONLY PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES
"B" B. C. PIPE SLUG CHUTE DETAILS ALL DIMENSIONS IN INCHES PVC - DWV PIPE FITTINGS FOR "X" SOC. HD. SCREW (N) HOLES "D" "C" "A" O.D. ALTER IF CONSTRAINED BY SPACE LIMITATION. (2) MIN. FASTENING HOLES REQUIRED.
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationCable Railing Kit Application Guide
Cable Railing Kit Application Guide January 2019 Nationwide Industries 10333 Windhorst Rd. Tampa, FL 33619 813.988.2628 Fax: 813.988.3465 Photo courtesy of FabWorx Framework You Will Need for Cable Railing
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD FORD ESCAPE
INSTALLATION INSTRUCTIONS GRILLE GUARD 08-010 FORD ESCAPE PARTS LIST: 1 Grille Guard 4 10-1.50mm x 30mm Hex Bolts 1 Driver/Left Frame Mounting 4 10mm Lock Washers 1 Passenger/Right Frame Mounting 6 10mm
More informationSolar Panel Top-of-Pole Mounting Kit For Panels Over 100 Watts Including CMP Panels
Solar Panel Top-of-Pole Mounting Kit For Panels Over 100 Watts Including CMP Panels Thank you for purchasing the top-of-pole solar panel mounting kit. This mounting system is designed to enable the solar
More informationPAK Drum Roll Top Assembly Instructions. Note: 2 people will be required to assemble roll top
PAK901 4 Drum Roll Top Assembly Instructions Note: 2 people will be required to assemble roll top PLEASE READ ASSEMBLY INSTRUCTIONS CARFULLY Tools required: 5/8 Socket & Ratchet 9/16 Deep Well Socket &
More informationBarofor Round System (polyester coated) Panels, Posts, Accessories
1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
More informationPassenger/Right Center and Rear Support Brackets. Driver/Left Center and
PARTS LIST: 1 Driver/Left HD Running Board 24 8mm x 24mm OD x 2mm Flat Washers 1 Passenger/Right HD Running Board 12 s 3 Driver/Left front, passenger center/rear Support Brackets 6 8mm-1.25 Hex Nuts 3
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationMETALPLAST-SOPRANA BRUINO TO VIA VOLVERA
1 4 HINGES >> METALPLAST-SOPRANA srl 10090 BRUINO TO VIA VOLVERA 88/4 TELEPHONE 011-9086490 FAX 011-9086979 E-MAIL : metsopr@tin.it WWW.metalplast-soprana.com VERSION WITH OVERTURNED PART HINGES WELDABLE
More information