Visit our web site:
|
|
- Ilene Greer
- 5 years ago
- Views:
Transcription
1 Compliance and Applications ICAO Annex NATO STANAG BS: Part, inset fixtures IEC: Category I, II and III all weather operation airfield lighting systems. Our ZA medium intensity, omnidirectional fixture is suitable for use as a taxiway edge and taxiway intersection light. Why Our ZA is Better Lightweight and robust aluminum alloy construction. ZA has been tested to, PSI (pounds per square inch) and conforms with both FAA and IEC requirements. Long life lamps (objective life of, hours at full brilliancy). Pressure test plug ensures moisture -proof light cavity. Prism removal and replacement achieved without need for adhesives or sealants. Pre-focused optics simplify maintenance. Corrosion resistant anodized finish. Available for non-airport applications such as heliport and architectural lighting with W, V or V lamps. Specifications Low profile:." (mm). Light channel within." (mm) of grade. Corrosion resistant finish meets U.S. Military Standard Salt Fog Test (MIL-STD-E, Method.) and IEC EN -- (Test Kb, severity ). Color beam variations achieved by dichroic coating. Exceeds L- photometric requirements when used as a medium intensity white runway edge light..a from W, W or W isolating transformer. Taxiway edge (LT) uses W lamp (blue), taxiway intersection (LE) uses W lamp (yellow), and taxiway intersection (LF) uses W lamp (yellow). Ordering Code Fixture Color Lamp Wattage* -ZAA -ZAA G: Green Y: Yellow R: Red B: Blue W: White : W,.A (LT, E) : W,.A (LF) * Also available in voltage powered, please contact us. Lamp bypass options available if required. Installation and maintenance manual AVD. Suitable for direct installation onto FAA L-B base can with -AA mounting adapter or onto " diameter base. Commonality of parts with the ZA RWCL-TDZ and the ZA TWCL fixture. " style: net weight. lb. (kg), gross weight. lb. (.kg). Carton size:. cu. ft. (. cu. meters); " (d) x " (w) x " (h) (mm (w) x mm (d) x mm (h)) Anodized finish fixtures (." B.C.): Order with - AA adapter ring if mounting on LB base, sold separately. Golden yellow finish fixtures (" B.C.): Order with - adapter ring if mounting on LB base, sold separately (golden yellow fixtures restricted to existing customers and replacements). Page of
2 ZA OMNI-DIRECTIONAL GENERAL ARRANGEMENT ZA INSTALLED ON FAA L-B BASE " dia.." dia.." bolt circle."." " holes." dia. on." bolt circle Grade ". ZA fixture. " mounting adapter. FAA L-B base (one piece). Outer earth terminal (optional). Inner earth terminal (optional).".". Isolating transformer. Secondary connection. Primary connection. Grommet Mounting Configurations L-B "-" Adapter/Flange Ring Anodized fixture (." B.C.): -AA Golden yellow fixture (" B.C.): -."." Page of
3 Common Replacement Parts Body Casting (Std) Bottom Cover Casting - Elkay Gland Set -// Bottom Cover Gasket - Prism Clamp - Bottom Cover Spinning Clamp - Prism Clamp Gasket - Prism Gasket - Blue Prism Dome - ALT White (Clear) Prism Dome - ALT Green Prism Dome - ALT Yellow Prism Dome - ALT Red Prism Dome - W.A Reflector Lamp LA- ALT W.A Reflector Lamp LA- ALT W /V Reflector Lamp LA- Lamp Gasket - Lamp Retaining Spring - B-Type Male Lead TRC---DO Pressure Test Plug - ALT Schrader Tank Valve - V/V lamp holder - Page of
4 ZA Taxiway Intersection Yellow performance ( watts) (FAA L- F) Minimum average specification Yellow performance ( watts) (FAA L- E) Minimum average specification ZA Taxiway Edge Blue performance ( watts) (CAP) Minimum average specification (FAA) Minimum Average specification (STANNAG) Minimum sverage specification ZA Heli-pad ZA Taxiway Edge (Stannag) White performance ( watts) Final approach and take off perimeter specification Yellow performance ( watts) Touchdown and lift off and aiming point specification Yellow performance ( watts) Yellow specification Green performance ( watts) Green specification Red performance ( watts) Red specification Page of
5 L- to " Split Ring Adapter (---) L- to " Split Ring Adapter (P/N ---) Page of
6 L-B "-" Adapter/Flange Ring (-AA). Approved and Certified to FAA Advisory Circular AC/-F Size: B=". Adapter Plates are galvanized to ASTM-A/ AM-. () /" equally spaced, thru holes with -/" x /" deep counter bore. Standard Plate: () /"- tapped holes Metric Plate: () M-. tapped holes. Standard Adapter Plates are shipped with: () /"- x -/" SS hex head bolts () () /", piece locking washers () () Bolt Set () containing: () /"- x " SS hex head bolts () () /", piece locking washers () Metric Adapter Plates are shipped with: () Mx.xmm SS hex head bolts () () /", piece locking washers () () Bolt Set (M) containing: () Mx.xmm SS hex head bolts () () /", piece locking washers () TYPE OD BC OD ID BC ID -AA." [.]." [.]." [.]." [.]." [.]." [.] Add M to the end of the part number to note Metric Adapter Plate [ ] = metric dimensions in mm Page of
ZA292 L-852E, L-852F, L-852T Taxiway Omni-Directional Inset Light
ZA292 L-852E, L-852F, L-852T Taxiway Omni-Directional Inset Light Compliance FAA Certified: L-852T (AC 150/5345-46D) FAA Compliant: L-852E, L-852F (AC 150/5345-46D) ICAO Annex 14 circular guidance 5.3.6,
More informationZA484 Runway Centerline & TDZ High Intensity Bi/ Unidirectional Inset Fixture
RUNWY TOUCH DOWN ZONE INSET LIGHTS Z Runway Centerline & TDZ High Intensity i/ Unidirectional Inset Fixture Compliance and pplications ICO nnex F C/-D, L-,,C, D, E; Class I & II NTO STNG C CP Transport
More informationAirfield Lighting. 8" Omnidirectional Medium-Intensity Inset Light (IN-OMA) Product Description
Product Description 8" Omnidirectional Medium-Intensity Inset Light (IN-OMA) Taxiway Edge Apron Edge Runway Approach Runway Threshold Runway End Note: This page is blank for convenient double-sided printing.
More informationEvaluation of In-Pavement Light Fixture Designs and Performance
Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of
More informationIR862C. IRIS LED elevated runway edge high intensity lighting solutions IR862. Compliant with Latest * Applications. International Standards
LED technology IR862C IRIS LED elevated runway edge high intensity lighting solutions Applications CAT III all weather operation airfield ground lighting (agl) systems. Compliant with Latest * International
More informationD4000 AND D5000 SERIES OMNIDIRECTIONAL
INSTRUCTION BOOKLET D4000 AND D5000 SERIES OMNIDIRECTIONAL VHF/UHF ANTENNAS BY www.tacocommunications.com 390146 Rev. F Please Note: A qualified structural engineer should be consulted prior to mounting
More informationStargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe
Stargrip series 3000 Mechanical Joint Wedge Action Restraint for Ductile Iron Pipe INFORMATION The Stargrip Mechanical Joint Restraint System is a unique product with a proven design that provides an exceptional
More informationSwivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
More informationSwivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
More informationAirfield Lighting. 8 SafeLED and SafeLED IQ Inset Light (SL-TC-I; SL-SB-I) Product Description
Product Description SafeLED and SafeLED IQ Inset Light (SL-TC-I; SL-SB-I) Taxiway Centre Line Lead-on/Exit Taxiway Stop Bar Intermediate Holding Position Aircraft Stand Manoeuvring Guidance Note: This
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationAgri-Fab OWNERS MANUAL MODEL NO CU. FT. FARM/YARD CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully
Agri-Fab OWNERS MANUAL MODEL NO. 45-01772 CAUTION: Read Rules for Safe Operation and Instructions Carefully 14 CU. FT. FARM/YARD CART Safety Assembly Operation Maintenance Parts the fastest way to purchase
More information1.8 METER SERIES 1184 ANTENNA SYSTEM
REVISION F January 10, 2002 ASSEMBLY MANUAL 1.8 METER SERIES 1184 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1184 ANTENNA SYSTEM F Revised Address 1/10/02
More informationDTFACT 16 C IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION
DTFACT 16 C 00047 IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION IESALC Fall Technology Meeting Government Contacts Subcommittee Dallas, TX October 23, 2017 Jeremy N. Downs,
More informationSeries 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
More informationBETTIS SERVICE INSTRUCTIONS FOR MODELS G01 THROUGH G13 SERIES HYDRAULIC ACTUATORS WITH POWER MODULE TIE BAR CONSTRUCTION
ENGLISH LANGUAGE BETTIS SERVICE INSTRUCTIONS FOR MODELS G01 THROUGH G13 SERIES HYDRAULIC ACTUATORS WITH POWER MODULE TIE BAR CONSTRUCTION PART NUMBER: 124839E REVISION: C DATE: 06 July 2006 Page 1 of 31
More informationcontent Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationINSTALLATION DOCUMENTATION For GROUND FIXATION of ELEVATED LIGHT FITTINGS
INSTALLATION DOCUMENTATION For GROUND FIXATION of ELEVATED LIGHT FITTINGS DOC 2401.E www.thornairfield.com THORN EUROPHANE 156 bd Haussmann 75379 Paris Cedex 08 FRANCE Tel : +33 (0) 1 49 53 62 62 Fax :
More informationDisclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationNAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:
More informationFIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
More informationPickup Box Utility Rack Package Installation (Instruction ID: )
017 Chevrolet Colorado Pickup - WD (VIN S) Canyon, Colorado Accessory Installation Manual N America Document ID: 3966961 Pickup Box Utility Rack Package Installation (Instruction ID:3144879) Installation
More information1.8 METER SERIES 1194 ANTENNA SYSTEM
January 14, 2002 REVISION G ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.8 METER SERIES 1194 ANTENNA SYSTEM G Revise Address 1/14/02 F
More informationMAINTENANCE DOCUMENTATION for EL-RGL
DOC 3305.E MAINTENANCE DOCUMENTATION for EL-RGL www.thornairfield.com THORN EUROPHANE 156 bd Haussmann 75379 Paris Cedex 08 FRANCE Tel : +33 (0) 1 49 53 62 62 Fax : +33 (0) 1 49 53 62 89 Thorn DNT Airfield
More informationINSTRUCTIONS FOR AIRFLEX 36WCBEP/36WCSEP WEAR PLATE REPLACEMENT USING GASKET SEALING TAPE
INSTRUCTIONS FOR AIRFLEX 36WCBEP/36WCSEP WEAR PLATE REPLACEMENT USING GASKET SEALING TAPE The material included in this kit is to be used for WC styles of brakes that are designed or upgraded to the EP
More informationMetal Halide - Ceramic, Medium Base ED17. H050 50w H070 70w H w H w HPS - Medium Base ED17
SILL 5 Yoke Mount Project: Type: Qty: S5 Series Mounting Reflector Lamping Lamp Color Finish _ Options Pole Series Height Finish Options Voltage Series S5 SILL Cityliter 5 Yoke Mount Mounting Reflector
More informationSpun Copper Bullet C to 277 Volt Spun Copper LED revision 11/7/14 kl_c24led_spec.pdf
Catalog number: ing Options: Ordered Separately from See pages 3-5 Approvals: Date: Page: 1 of 5 Specifications 6K" DIA. (165.1 mm) Ordering Information 13J" (336.6 mm) K" NPT 2B" (54.0 mm) Source l S3/9L3KUV
More informationM4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationONE-LOK Series SLC/SLCE Pipe Restraint for AWWA C909 PVC Pipe
ONE-LOK Series SLC/SLCE Restraint for AWWA Use the SIGMA ONE-LOK Series SLC/SLCE restraint for AWWA pipe at mechanical or push-on joint ductile iron fittings. The ONE-LOK Restraint Systems can successfully
More information(50 FT FT) MICHIGAN DEPARTMENT OF TRANSPORTATION 10-0" 7-6" 8-0" 6-0" Truss Depth. 3" sheets 5 & 6 of 10) DEPARTMENT DIRECTOR. Kirk T.
Column truss connection (See details sheets 3 & 4 of 10) \ Span (Odd number of panels) \ Span (Even number of panels) Back truss chord Top truss chord \ Truss Chord splice Truss depth (See details \ Left
More informationDETAIL SPECIFICATION SHEET FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL
INCH-POUND MS33786B 12 February 2013 SUPERSEDING MS33786A 1 February 1985 DETAIL SPECIFICATION SHEET FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL This specification is approved for use by all Departments
More informationROUND STEEL POLE STRAIGHT
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 ROUND STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with a
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationSTRATUS SHELTER. Take bike parking to new heights
Take bike parking to new heights The Stratus Shelter is a striking bike shelter option for any transit station, university campus, or multi-family residential building project. It is constructed of American
More informationRG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable)
T E M P O S O N I C S L S E R I E S INSTALLATION A N A L O G O U T P U T 550570 B W I R I N G - A N A L O G O U T P U T S RG Connector: (Voltage or Current Output) 1 Gray 0 to 10 Vdc, 4 to 20 ma, or 0
More informationInteractive Monitor Arm
Interactive Monitor Arm Tools Required -5mm Allen wrench -Phillips screwdriver -Plastic mallet There are two ways to attach a Monitor Arm to a Full Frame; with a Beam, or with a Post Mount. Both methods
More informationFisher 667 Diaphragm Actuators Size 80 and 100
Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...
More informationINSTALLATION INSTRUCTIONS
SHD TO REMOVE HOOD (SHD) ) LOOSEN (4) SOCKET HEAD SCREWS AND RETAINING RINGS FROM HOOD (SHD). ) REMOVE HOOD AND. 3) DISCONNECT WIRES. 3 4) REMOVE REFLECTOR BY LOOSENING (4) PHILIPS HEAD SCREWS. 5) PLEASE
More informationOrdering Guide - Shaft Assemblies -
Ordering uide - Shaft ssemblies - S & TRS Series TRS - - SS - 4 ssembly Type S TRS Shaft Diameter Overall Length xxx - inches Shaft Material - 00 Steel SS - 440C Stainless Steel CR - Chrome Plated 00 Steel
More informationAirfield Lighting. Product Description Inset & Elevated Light Support
Product Inset & Elevated Light Support Transforment Case Adaptor Ring Extension Ring Cover Plate Base Plate Frangible Coupling Curve Tube Tube Tripod Stand Note: This page is blank for convenient double-sided
More information11-1/4 OD at Transition Point. Microcosmic. 4th and Brannan Street Platform Station Project. Elevation. Moto Ohtake 2014
74 480 330 90 72 180 150 60 90 18 11- OD at Transition Point 36 184 74 Microcosmic Elevation 14 1 Moto Ohtake I. GENERAL NOTES: A. SCULPTURE DESIGN CRITERIA 1. CALIFORNIA BUILDING CODE (CBC, 2010 EDITION)
More informationTable of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax
Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,
More informationPanels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationContact Ed Zukowski or Frank Laszlo with any questions or to order airport lighting products.
Contact Ed Zukowski or Frank Laszlo with any questions or to order airport lighting products. Ed@genesislamp.com, Frank@genesislamp.com Welcome to Genesis. Genesis Lamp, a 25 year old company, is one of
More informationFeatures. Continuous Duty Cycle Actuators
Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed
More informationNemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4
I N D U S T R I A L rev. A- INSTALLATION INSTRUCTIONS *PENDING* E77827 E77827 APPLICATION MR3 & MR6 Luminaires are suitable for use in the following areas as defined by the National Electrical Code (NEC)
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More informationEN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
More informationHow to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
More informationHydraulic Torque and Ratcheting Wrenches
Series Hydraulic Torque and Ratcheting es Fits easily in tight spaces Thinner than the nut height Light weight, best power to weight ratio in the industry. Interchangeable wrench heads and reaction units
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationPipe Product Catalog Table of Contents
Pipe Product Catalog Table of Contents Section A: Drawing #: Page Description A1 Reinforced Concrete Pipe A3 Storm Manhole Sizing Chart (48" - 96") A3.1 Storm Manhole Sizing Chart (108" - 144") A4 48"
More information4000 Watt - Metal Halide - Three Stage Light Tower - 30 Feet
4000 Watt - Metal Halide - Three Stage Light Tower - 30 Feet Part #: LM-30-3S-4X1000W Page: 1 Made in the USA The LM-30-3S-4X1000W Light Tower from Larson Electronics is a 30 foot extendable light tower
More informationINSTALLATION DOCUMENTATION for EL-RGL
DOC 2305.E INSTALLATION DOCUMENTATION for EL-RGL www.thornairfield.com THORN EUROPHANE 156 bd Haussmann 75379 Paris Cedex 08 FRANCE Tel : +33 (0) 1 49 53 62 62 Fax : +33 (0) 1 49 53 62 89 Thorn DNT Airfield
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationITEM NO. PART NO DESCRIPTION QTY.
PUMP MAINTENANCE ITEM NO. PART NO DESCRIPTION QTY. 1 52002 Center Case 1 2 52052 Back End Plate 1 3 52051 Front End Plate 1 4 55090 Octagonal Nut 1 5 53001 Idler Gear 1 6 53002 Drive Gear 1 7 28062 Bushing
More informationInternational Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
More informationAGILITY. ROTA WEB CLIMBER 3.3m PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT ROTAWEB33. 8 TO mm 73kg 115kg
AGILITY ROTA WEB CLIMBER.m PROD. CODE SIZE AGE RANGE F/ FALL HEIGHT HEAVIEST PART TOTAL WEIGHT Dia. m x.m High 8 TO 4 00mm 7kg 5kg SPECIFICATION Centre Upright: Made from 6" diameter aluminium tube to
More informationSECTION CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP
1 1 1 0 1 0 1 0 1 SECTION 1 1 CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP BASED ON DFD MASTER SPECIFICATION DATED /01/ P A R T 1 - G E N E R A L SCOPE The work under this section shall consist of
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationBeam Pattern. Lamping C K (coated lamp) NOL Lamp not included C737 NOL. Lamp not included K (clear lamp) NOL
SILL PR022 Projector Floodlights Project: Type: Qty: PR022 Series _ Beam Pattern _ Lamping _ Lamp Color _ Mounting _ Finish _ Voltage Lens Accessories Options Series Beam Pattern Lamping Lamp Color Mounting
More informationPC-196 B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG. Publication 501-TAB 8
B-3-A 7-1/2 NYCOPAC BRAKE ASSEMBLIES PARTS CATALOG Publication 501-TAB 8 Revision A November 1, 1991 APPROX. COMPLETE HANDBRAKE NET WT PART NO. TON WHEEL WHEEL ASSEMBLY LBS (CAR SET) CAR BASE DIA. PART
More informationAIR KIT 3. Heavy-Duty Public Bike Pump
Heavy-Duty Public Bike Pump The Air Kit 3 is designed for heavy-duty, repeated public use. The waterproof gauge and burly construction mean that this pump will continue to work long after others have failed.
More informationDouble-Ridged Waveguide Horn Antennas
Models 3112, 3106B, 3119, 3115, 3117, 3116C Double-Ridged Waveguide Horn Antennas User Manual ETS-Lindgren Inc. Although the information in this document has been carefully reviewed and is believed to
More informationBERNINI PANIC DEVICES
BERNINI PANIC DEVICES With EC mark, in compliance with standard EN 25:2008 Exclusive Pininfarina design Complete application adaptability Fast and easy installation Functional safety and reliability Also
More informationFRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH
Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on
More informationl6c Collet Block for Light to Medium Duty Mills General Requirements and Operating Conditions
l6c Collet Block for Light to Medium Duty Mills General Requirements and Operating Conditions 50-100 PSI air pressure required (recommend 85 PSI - filtered & lubricated). 11 / 16" (17.46mm) keys used on
More informationIndex. Accessories WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Index 9.00.01 07/2010.C Accessories Mounting Kits and Cross Reference - 300, 400 Series... 9.01.01 Mounting Kits - 500, 700, 900 Series... 9.01.02 Stud Nuts & Kits... 9.02.01 Stud Nuts & Kits - ISO 03,
More informationBETTIS SERVICE INSTRUCTIONS FOR MODELS G01 THROUGH G10 SERIES HYDRAULIC SPRING RETURN ACTUATORS WITH M11 HYDRAULIC OVERRIDE
ENGLISH LANUAGE BETTIS SERVICE INSTRUCTIONS FOR MODELS G01 THROUGH G10 SERIES HYDRAULIC SPRING RETURN ACTUATORS WITH M11 HYDRAULIC OVERRIDE PART NUMBER: 127072E REVISION: A DATE: December 2001 Page 1 of
More informationRELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
More informationMUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5
operation Instructions manual MUELLER E-5TM and D-5TM TAble of contents PAGE E-5 General Information 2 Drilling Machines D-5 General Information 3 Operating Instructions 4-5 E-5 Parts 6 D-5 Parts 7! WARNING:
More information7141 & NATIONAL POLE VAULT STANDARDS SPECIFICATIONS
SPECIFICATIONS Specifications: This standard has a clamping system and a handle added for ease of operation. The clamping system is above the base pad protectors when in the lowest position and the tightening
More informationA-51 Incandescent Factory Sealed Luminaires Explosionproof Suitable for use in Wet Locations. UNILETS for use with Threaded Metal Conduit.
Explosionproof NEC/CEC For Group A and B: Class I, Division 1 and 2, Groups A, B, C, D NEC/CEC For Group C and D: Applications A-51 Series Incandescent Class I, Groups A, B, C and D; and Class II, Groups
More information1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM
August 21, 1997 Revision D ASSEMBLY MANUAL 1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM PRODELIN CORPORATION 1700 NE CABLE DRIVE CONOVER, NC 28613-0368 1.2M Ku-BAND Rx/Tx SERIES 1134 ANTENNA SYSTEM D
More informationOperating & Maintenance Instructions 320 Dome Blowing Unit
Operating & Maintenance Instructions 320 Dome Blowing Unit Table of Contents 1. On Delivery... 2 2. General Information... 3 3. Dome Blowing Technique... 4 4. Other Shapes... 6 5. Machine Maintenance...
More informationTuf-Lite II Fans H Hi Temp 3000HT Series Hub
Tuf-Lite II Fans H Hi Temp 3000HT Series Hub INSTALLATION MANUAL Hudson Tuf-Lite II Hi Temp Fan Blades Adjustable Pitch Fan Assembly 5 through 14 Diameter Hudson Tuf-Lite II Hi Temp fan blades (Red) are
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationInstruction and Assembly Manual 1 - Compass 1 - Clinometer 1-9 Magnetic Bubble Level 1 - Torque Wrench (Capacity 4 Ft-lbs Ft-lbs)
Instruction and Assembly Manual 1 - Compass 1 - Clinometer 1-9 Magnetic Bubble Level 1 - Torque Wrench (Capacity 4 Ft-lbs - 175 Ft-lbs) ASSEMBLY TOOLS REQUIRED 1 - ¹⁵ ₁₆ Deep Socket (¹ ₂ Drive) 1 - ⁷ ₁₆
More informationSPECIFICATION FOR STEP UP TRANSFORMER 0.415/11Kv and (630KVA & 1000KVA)
SPECIFICATION FOR STEP UP TRANSFORMER 0.415/11Kv and (630KVA & 1000KVA) 0.415/33kV DESIGN AND CONSTRUCTION General 1. The transformer shall be three phase, oil immersed type, air cooled, core type, outdoor
More informationParts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
More informationZX1i-90. Electro-Voice ZX1i-90. Integrated QuickSAM Heavy-Duty Strong-Arm Mounting Bracket Included
Electro-Voice ZX1i-90 ZX1i-90 Integrated QuickSAM Heavy-Duty Strong-Arm Mounting Bracket Included Patented ASC (Automatic Saturation Compensation) on Transformer Versions EV8L 8 inch Weatherized Cone High-Output
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationPC /2" ABU BRAKE CYLINDER ASSEMBLY PARTS CATALOG
8-1/2" ABU BRAKE CYLINDER ASSEMBLY PARTS CATALOG REVISION A May 24, 2006 THIS PAGE LEFT BLANK INTENTIONALLY - 2 - WARNING AFTER REPLACEMENT OF ANY PART IN THIS DEVICE, THE OPER- ATION OF THE DEVICE MUST
More informationMETRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationPipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings
Pipe Restrainers series 1000 1000C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings INFORMATION Restrainers for restraining mechanical joint or push-on fittings
More informationStandard Pole Mount Parabolic Antenna Mounting Instructions 3 ft. (90cm) & 4 ft. (120cm)
495 R Billerica Ave. N. Billerica, MA 01862 USA Tel: (978) 459-8800 Fax: (978) 459-3310 / 8814 www.radiowavesinc.com email: sales@radiowavesinc.com Standard Pole Mount Parabolic Antenna Mounting Instructions
More informationMODEL Service Manual. IMPORTANT: Fill in pertinent information on page 2 for future reference.
MODEL 9000 Service Manual IMPORTANT: Fill in pertinent information on page for future reference. Job Specification Sheet * JOB NO. * MODEL NO. * WATER TEST * CAPACITY PER UNIT MAX. PER REGENERATION * MINERAL
More informationType Meter Offset Transmit Receive Antenna System
+40 Assembly Instructions Type 243 2.4 Meter Offset Transmit Receive Antenna System 8000450-03 Skyware Global 1315 Industrial Park Drive Smithfield, NC 27577 Telephone: +1-919-934-9711 Internet: www.skywareglobal.com
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationGenesis Lamp Corporation is your source for airport lighting systems, including airport light bulbs, lighting fixtures and hardware.
Genesis Lamp Corporation is your source for airport lighting systems, including airport light bulbs, lighting fixtures and hardware. 2014 Airport Lighting No one knows aviation lighting like Genesis Lamp.
More information