RF & MW Connectors. 6 Where signal & Connectivity is needed, There is GigaLane

Transcription

1 RF & MW Connectors mm Connectors mm Connectors - Hermetic Seal (0.012 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors - SMA Connectors - MCX Connectors - MMCX Connectors - N-Type Connectors 6 Where signal & Connectivity is needed, There is GigaLane

2 GigaLane Co., Ltd. 7 RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix

3 2.4mm Connectors Introduction GigaLane 2.4mm Connectors are precision connectors for optimum RF performance up to 50 GHz. The connectors feature excellent mechanical stability, extreme reliability and it maintains highly cost-effective pricing, short lead-time. The connector is compatible with 1.85mm connectors. It is applicable to military and telecommunication application. Interface Standards (MIL-STD-348) Unit : mm (Jack) (Plug) Specification Electrical Frequency Impedance Insulation Resistance Dielectric Withstand Voltage Contact Resistance - Outer Conductor - Inner Conductor Insertion Loss RF Leakage Power Handling DC ~ 50 GHz 50 Ω 1.3 : 1 to 50 GHz 5000 MΩ 1200 Vrms max 2mmΩ max 3mmΩ max 0.35 db max (@ 50 GHz) -90 db 70W (@2 GHz) Mechanical Mating Cycle(Durability) 500 Recommended Mating Torque Proof Torque Coupling Nut Retention Force Center Contact Retention Force 0.9 ~ 1.13 Nm / 8 ~ 10 lbs 1.7 Nm / 15.0 lbs 270 N / 27.7 kfg / 61 lbs 4 pound (axial) Environmental Temperature - 40 C to C Thermal Shock MIL-STD-202, method 107, condition B Corrosion (Salt Spray) MIL-STD-202, method 101, condition B, 5% salt Vibration MIL-STD-202, method 204, condition D (20G) Moisture Resistance MIL-STD-202, method 106 Materials Body Stainless Steel Passivated Center Contact Beryllium Copper(BeCwu) Gold Plated Insulator Engineering Plastic - 8 Where signal & Connectivity is needed, There is GigaLane

4 2.4mm Connectors DC to 50 GHz Mechanically Compatible with 1.85 mm Connectors Air Dielectric Captivated Center Contact JACK (Female) Panel Mount (2 HOLE, 15.9mm LONG) M7.0 P0.75 P2F-S DIA [0.012] Panel Mount (4 HOLE, 12.8mm SQUARE) M7.0 P0.75 PLUG (Male) Panel Mount (2 HOLE, 15.9mm LONG) Hex-Nut 8 [0.315] 12.1 [0.476] P2M-S DIA [0.012] 0.30[0.0012] 1.55 [0.061] 5.7 [0.224] Panel Mount (4 HOLE, 12.8mm SQUARE) Hex-Nut 8 [0.315] [0.423] [0.423] 1.55 [0.061] 0.30[0.0012] 1.55 [0.061] 0.30[0.0012] P2F-S DIA [0.012] P2F-S [0.0012] 8.8 [0.346] 12.8 [0.504] [ 0.102] 12.2 [0.480] 12.2 [0.480] 15.9 [0.626] 15.9 [0.626] 5.7 [0.224] [ 0.102] [ 0.102] Panel Mount (2 HOLE, 13.9mm LONG) P2F-S DIA [0.012] Panel Mount (4 HOLE, 9.5mm SQUARE) M7.0 P0.75 M7.0 P [0.423] P2F-S DIA [0.012] Panel Mount (2 HOLE, 13.9mm LONG) Hex-Nut 8 [0.315] 12.1 [0.476] P2M-S DIA [0.012] 0.30[0.0012] 1.55 [0.061] Panel Mount (4 HOLE, 9.5mm SQUARE) Hex-Nut 8 [0.315] 1.55 [0.061] [0.423] 5.7 [0.224] 0.30[0.0012] 0.30[0.0012] 1.55 [0.061] 6.35 [0.250] P2F-S [0.0012] 10.2 [0.402] 9.5 [0.374] 13.9 [0.547] 10.2 [0.402] 5.7 [0.224] 13.9 [0.547] [ 0.067] [ 0.067] RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix 12.1 [0.476] 1.55 [0.061] 8.8 [0.346] 12.8 [0.504] 12.1 [0.476] 1.55 [0.061] 6.35 [0.250] 9.5 [0.374] P2M-S DIA [0.012] P2M-S DIA [0.012] GigaLane Co., Ltd. sales@gigalane.com 9

5 2.92mm Connectors Introduction GigaLane 2.92mm Connectors are precision connectors for optimum RF performance up to 40 GHz. 2.92mm connectors feature high mechanical stability and excellent repeatability. The connector is compatible with 3.5mm and SMA connectors. It is applicable to military and telecommunication application. Interface Standards (MIL-STD-348) Unit : mm (Jack) (Plug) Specification Electrical Frequency Impedance Insulation Resistance Dielectric Withstand Voltage Contact Resistance - Outer Conductor - Inner Conductor Insertion Loss RF Leakage Power Handling DC ~ 40 GHz 50 Ω 1.25 : 1 to 40 GHz 5000 MΩ 1200 Vrms max 2mmΩ max 3mmΩ max 0.3 db max (@ 40 GHz) -90 db 80W (@ 2 GHz) Mechanical Mating Cycle(Durability) 500 Recommended Mating Torque Proof Torque Coupling Nut Retention Force Center Contact Retention Force 0.9 ~ 1.13 Nm / 8 ~ 10 lbs 1.7 Nm / 15.0 lbs 270 N / 27.7 kfg / 61 lbs 4 pound (axial) Environmental Temperature -40 C to C Thermal Shock MIL-STD-202, method 107, condition B Corrosion (Salt Spray) MIL-STD-202, method 101, condition B, 5% salt Vibration MIL-STD-202, method 204, condition D (20G) Moisture Resistance MIL-STD-202, method 106 Materials Body Stainless Steel Passivated Center Contact Beryllium Copper(BeCu) Gold Plated Insulator Engineering Plastic - 10 Where signal & Connectivity is needed, There is GigaLane

6 2.92mm Connectors DC to 40 GHz Mechanically Compatible with 2.92mm Connectors Air Dielectric Captivated Center Contact JACK (Female) Panel Mount (2 HOLE, 15.9mm LONG) PKF-S DIA [0.012] Panel Mount (4 HOLE, 12.8mm SQUARE) 9.65 [0.380] PKF-S DIA [0.012] PLUG (Male) 9.65 [0.380] 0.30[0.0012] 1.55 [0.061] 0.30[0.0012] 1.55 [0.061] 8.8 [0.346] 12.8 [0.504] Panel Mount (2 HOLE, 15.9mm LONG) Hex-Nut 8 [0.315] P2M-S DIA [0.012] 12.2 [0.480] 15.9 [0.626] 5.7 [0.224] Panel Mount (4 HOLE, 12.8mm SQUARE) Hex-Nut 8 [0.315] 12.1 [0.476] [ 0.102] Panel Mount (2 HOLE, 13.9mm LONG) 9.65 [0.380] PKF-S DIA [0.012] Panel Mount (4 HOLE, 9.5mm SQUARE) 0.30[0.0012] 1.55 [0.061] 0.30[0.0012] 12.2 [0.480] 15.9 [0.626] 5.7 [0.224] [ 0.102] 9.65 [0.380] PKF-S DIA [0.012] 0.30[0.0012] 1.55 [0.061] 0.30[0.0012] 1.55 [0.061] 6.35 [0.250] 9.5 [0.374] Panel Mount (2 HOLE, 13.9mm LONG) Hex-Nut 8 [0.315] P2M-S DIA [0.012] Panel Mount (4 HOLE, 9.5mm SQUARE) Hex-Nut 8 [0.315] 12.1 [0.476] 0.30[0.0012] 1.55 [0.061] 0.30[0.0012] 10.2 [0.402] 13.9 [0.547] 5.7 [0.224] [ 0.067] 10.2 [0.402] 13.9 [0.547] 5.7 [0.224] [ 0.067] RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix 1.55 [0.061] 6.35 [0.250] 12.1 [0.476] 1.55 [0.061] 8.8 [0.346] 12.8 [0.504] 12.1 [0.476] 9.5 [0.374] PKM-S DIA [0.012] P2M-S PKM-S DIA [0.012] P2M-S GigaLane Co., Ltd. sales@gigalane.com 11

7 Test Result of 2.92mm Connectors Design Guide (Microstrip to coax) A very reliable connector can still increase if it does not match impedance when it is connected. Therefore, 50ohm microstrip line structure is recommended to get a maximized future advantage with PKF series connector. t w g Er mil 0.56mm 0.1mm Tapper 1 Tapper 2 Tapper 3 A 1.0mm 2.0mm 3.0mm B 0.53mm 0.5mm 0.45mm A 2.92mm Connector Microstrip Line Tapper 1 Data - Tapper 2 Data - Tapper 3 Data B 0.56mm Frequency [GHz] Test result of Back to Back 2.4mm Connector (P/N: P2F-S00-000) with 50 ohm Glass Bead Measurement Data Frequency [GHz] 2.92mm Connector (P/N: PKF-S00-000) with 50 ohm Glass Bead Measurement Data Frequency [GHz] 12 Where signal & Connectivity is needed, There is GigaLane

8 Installation of 2.4mm & 2.92mm Connectors with Glass Bead 0.012" Glass Bead Installation Solder Transmission Line Hermetic Seal (0.012 Glass Bead) 0.3 [0.012] 50 ohm hermetic seal (glass bead dimension) Ø 2.49 Ø [0.098] Ø Ø Solder 0.1 RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix 1.78 [0.070] 1.59 [0.063] 4.57 [0.180] TL-522 GigaLane Co., Ltd. 13

9 SMP Connectors Introduction GigaLane SMP Connectors offer you precise mating and excellent performance through 40 GHz with competitive price. They have excellent vibration and shock performance based on MIL standard and suitable for application such as military, broadband, instrumentation and telecommunication application. Interface Standards (MIL-STD-348) Unit : mm (Jack) (Full Detent) (Plug) (Limited Detent) (Smooth Bore) (Catechers Mit) (Uncabled Connector) (Cabled Connector) Installation of SMP Connectors 14 Where signal & Connectivity is needed, There is GigaLane

10 SMP Connectors DC to 40 GHz Excellent MIL-STD-202 qualified Specification Electrical Frequency Impedance Insulation Resistance Dielectric Withstand Voltage Contact Resistance - Outer Conductor - Inner Conductor Insertion Loss RF Leakage Mechanical Axial Misalignment Radial Misalignment Center to Center Spacing (min) Environmental Temperature Thermal Shock Corrosion (Salt Spray) Shock Vibration DC ~ 18 GHz DC ~ 40 GHz 50 Ω DC to 18 GHz 1.2 : 1 typical 18 to 40 GHz 1.3 : 1 typical Min 5,000 MΩ 500 Vrms (@ sea level) 125 Vrms (@ 70,000ft) 2.0 mω max 6.0 mω max 0.1 * f(ghz) GHz 0 ~ 0.25 mm +/ mm 0.17 in (4.32mm) -40 C to C MIL-STD-202, method 107, test condition B MIL-STD-202, method 101, test condition B, 5% salt MIL-STD-202, method 213, test condition I MIL-STD-202, method 204, test condition D Moisture Resistance MIL-STD-202, method 106 Materials Body Center Contact Stainless Steel Beryllium Copper(BeCu) Brass Beryllium Copper(BeCu) Brass Insulator PTFE - Mechanical Force for Shrouds Passivated Gold Plated Gold Plated Gold Plated Gold Plated Full Detent Limited Detent Smooth Bore Force to Engage (max) 6.8 kg 4.5 kg 0.9 kg Force to Disengage (min) 2.3 kg 0.9 kg 0.2 kg Mating cycle ,000 JACK (Female) Panel Mount (2 HOLE, 11.9mm LONG) RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix PPF-S GigaLane Co., Ltd. sales@gigalane.com 15

11 SMP Connectors PLUG (Male) PCB Thread-in PCB Edge Mount Type. Full PPM-S02-F00 Limited PPM-S02-L00 Smooth PPM-S02-S00 Type. Full PPM-R00-F00 Limited PPM-R00-L00 Smooth PPM-R00-S [0.033] M5.0 P [0.059] 8.5 [0.335] PCB Right Angle Mount PPM-S02-F [0.161] 2 [0.079] 5.5 [0.217] 3.15 [0.124] 0.7 [0.028] 6 [0.236] 0.5 [0.020] 6 [0.236] 2-1.1T Cut [0.043] 4.36 [0.172] Type. Full PPM-S03-F00 Limited PPM-S03-L00 Smooth PPM-S03-S00 Panel Shroud, Thread-in (No Center Contact) Type. Full PPM-S02-F01 Limited PPM-S02-L01 Smooth PPM-S02-S [0.014] 2.3 [0.091] 5.1 [0.201] 2 [0.079] 0.84 [0.033] 4.05 [0.159] 6.36 [0.250] SMP Connectors for Cable Assemblies Straight JACK (SR085, SF085) Right Angle JACK (SR085, SF085) 3.3 [0.130] 6.4 [0.252] PFS01 PFR [0.167] 6.65 [0.262] 4 [0.157] 6.4 [0.252] 3.4 [0.134] Test Result of SMP Connectors Radial Mis-Alignment Condition Axial Mis-Alignment SMP_AxialCondition mm 0.2mm UNS-2A-THD 1.65 [0.065] 3.05 [0.120] 4 [0.157] 0.8 [0.031] 2 HOLE Panel Shroud (No Center Contact) PPM-R00-F [0.044] 3.04 [0.120] 4.17 [0.164] 8.6 [0.339] 12.2 [0.480] 4.2 [0.165] Type. Full Limited Smooth PPF-S02-F01 PPM-S00-F00 PPM-S00-L00 PPM-S00-S00 PPM-S00-F00 REFERENCE SMP(M) to 2.92mm(F) Adapter Measurement Data - Radial Misalignment Radial Misalignment Frequency [GHz] SMP(M) to 2.92mm(F) Adapter Measurement Data Radial Misalignment Axial Misalignment Frequency [GHz] 16 Where signal & Connectivity is needed, There is GigaLane

12 BMA Connectors Introduction GigaLane BMA Connectors offer you precise mating and excellent performance through 18 GHz. They are designed based on MIL standard and are ideally suited for communication base station equipment, rack-and-panel applications with appropriate float-mounted jacks, building block systems such as radar. Interface Standards (MIL-STD-348) Unit : mm Specification Electrical Frequency Impedance Insulation Resistance Dielectric Withstand Voltage Contact resistance - Outer Conductor - Inner Conductor Insertion Loss RF Leakage (Jack) Mechanical Mating Cycle(Durability) 1000 DC to 18 GHz 50 Ω 1.3 : 1 typical 5000 MΩ 1000 Vrms max 2mmΩ max 3mmΩ max 0.3dB max (@ 18 GHz) GHz Engagement Force 1.5 kg max (14.7 N) Disengagement Force 0.2 kg min (1.9 N) (Plug) Environmental Temperature -40 C to C Thermal Shock MIL-STD-202, method 107, test condition B Corrosion (Salt Spray) MIL-STD-202, method 101, test condition B, 5% salt Shock MIL-STD-202, method 213, test condition I Vibration MIL-STD-202, method 204, test condition D Moisture resistance MIL-STD-202, method 106 RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix Materials Body Center Contact Beryllium Copper(BeCu) Brass Beryllium Copper(BeCu) Brass Insulator PTFE - Passivated Gold Plated Gold Plated Gold Plated GigaLane Co., Ltd. sales@gigalane.com 17

13 BMA Connectors DC to 18 GHz High Reliability & Ease of Assembly Push-On, Non-Locking Type PLUG (Male) Panel Mount (2 HOLE, 15.9mm LONG) Panel Mount (4 HOLE, 12.8mm SQUARE) 0.5 [0.020] 2.16 [0.085] 1.5 [0.059] 12.2 [0.480] 15.9 [0.626] 0.5 [0.020] 2.16 [0.085] 1.6 [0.063] 3.2 [0.126] [ 0.102] 3.2 [0.126] 1.65 [0.065] 1.65 [0.065] 11 [0.433] 11 [0.433] 5.7 [0.224] PMM-S PMM-S [0.346] 12.8 [0.504] BMA Connectors for Cable Assemblies Straight PLUG Bulkhead (SR085, SF085) Straight PLUG Bulkhead (SR141, SF141) Washer Nut(Hex) 8 [0.315] Washer Nut(Hex) 8 [0.315] 3.2 [0.126] Max Panel 1.7 [0.067] 13.1 [0.516] 17.6 [0.693] Hex 11 [0.433] MMS01 MMS [0.126] Max Panel 1.7 [0.067] 13.1 [0.516] 17.6 [0.693] Hex 11 [0.433] Straight Aligner JACK (SR085, SF085) Right Angle JACK (2 HOLE, 21.9mm LONG) (SR141, SF141) Washer 11 [0.433] Nut(H-Cut) 8.9 [0.350] 8/25"-72 UNS-2A 5.3 [0.209] 13.9 [0.547] 1.6 [0.063] 21 [0.827] [ 0.126] 9.5 [0.374] 9.45 [0.372] 9.5 [0.374] 16 [0.630] 21.9 [0.862] 2.9 [0.114] Max Panel 8.55 [0.337] 15.3 [0.602] MFS01 G05RFC [0.709] 11.2 [0.441] 9.7 [0.382] Test Result of BMA Connectors BMA_Radial Radial Mis-Alignment Condition BMA_Axial Axial Mis-Alignment Condition REFERENCE BMA(M) to SMA(F) Adapter Measurement Data Radial Misalignment Frequency [GHz] BMA(M) to SMA(F) Adapter Measurement Data - Axial Misalignment Frequency [GHz] 18 Where signal & Connectivity is needed, There is GigaLane

14 High Performance End Launch Connectors Introduction GigaLane High Performance End Launch Connectors are designed for 2.4mm (50 GHz), 2.92mm (40 GHz) and SMA (27 GHz) with Low. It is applicable to chip set evaluation/demo boards, Test fixtures and board characterization. Specification Electrical 2.4 mm DC ~ 50 GHz Frequency 2.92 mm DC ~ 40 GHz SMA DC ~ 27 GHz Impedance 50 Ω Low Insulation Resistance Low Insertion Loss Environmental Thermal Shock MIL-STD-202, method 107, test condition B Corrosion (Salt Spray) MIL-STD-202, method 101, test condition B, 5% salt Shock MIL-STD-202, method 213, test condition I Vibration MIL-STD-202, method 204, test condition D Moisture Resistance MIL-STD-202, method 106 Materials Body Stainless Steel Passivated Connector Center Contact Beryllium Copper(BeCu) Gold Plated Insulator Engineering Plastic - Launched Block Brass Ni plated Launched Block Pin Beryllium Copper(BeCu) Gold Plated Insulator PTFE - RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix GigaLane Co., Ltd. sales@gigalane.com 19

15 High Performance End Launch Connectors G01SFB001 (2.4 mm, 50 GHz) G02SFB002 (2.92 mm, 40 GHz) G06SFB102 (SMA, 27 GHz) Pin Diameter Dielectric Diameter A B C 0.13 [0.005] 0.23 [0.009] 0.76 [0.029] Drawing 2.4mm / 2.92mm / SMA Installation Procedure Mount the end launch connector on the board in the desired position. Make sure the launch pin is at the center of the trace. Make sure the launched block is tight against board. Tighten the M1.6(1.5mm) mounting screws to be tighten unit the connector is secured. 0.51mm Overhang Tight Against Board 20 Where signal & Connectivity is needed, There is GigaLane

16 High Performance End Launch Connectors GCPWG Test Result of G01SFB001 VNA DUT * PCB : 8 MIL R4003 Specificaton - Insertion Loss : Min ~50 GHz - Return Loss : Max ~50 GHz Frequency [GHz] Microstrip with Top Ground Test Result of G01SFB001 Specificaton - Insertion Loss : Min ~50 GHz - Return Loss : Max ~50 GHz 25.4mm[1.0inch] Test Result - Insertion Loss : Min ~50 GHz - Return Loss : Max ~50 GHz VNA DUT 25.4mm[1.0inch] Test Result Frequency [GHz] * PCB : 8 MIL R Insertion Loss : Min ~50 GHz - Return Loss : Max ~50 GHz RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix GigaLane Co., Ltd. sales@gigalane.com 21

17 A High Performance End Launch Connectors GigaLane End Launch SMA Connector is designed for applications such as High Performance RF Circuit Boards. It is attached to RF circuit board by inserting the board edge between legs and soldering legs. It has excellent return Loss up to 26.5 GHz. 1 [0.039] 0.5 [ 0.020] PIN DiA. PSF-S [0.024] 7.82 [0.308] 9.47 [0.373] [0.522] 6 [0.236] 8 [0.315] 3.75 [0.148] PSF-S [0.031] PSF-S [0.039] PSF-S [0.043] 1 [0.040] SMA Connector (P/N: PSF-S01-000~011) Measurement Data Frequency [GHz] PSF-S [0.047] PSF-S [0.051] PSF-S [0.059] PSF-S [0.063] PSF-S [0.068] PSF-S [0.083] PSF-S [0.089] PSF-S [0.142] * PCB Pattern See Page 90p Fig 2 GigaLane Edge Mount SMA Connector is designed for applications such as Multi-layer Board with coplanar waveguide and single layer board with microstrip. It has excellent electrical transition up to 18 GHz. 7.8 [0.307] 4.8 [0.189] 12.2 [0.480] 2-2 [ 0.079] 8.8 [0.346] PSF-S * PCB Pattern See Page 90p Fig [0.370] 1.5 [0.059] 7.5 [0.295] 1 [0.039] 14.9 [0.587] 4 [0.157] 4 [0.157] SMA Connector (P/N: PSF-S05-000) Measurement Data Frequency [GHz] 22 Where signal & Connectivity is needed, There is GigaLane

18 High Performance End Launch Connectors GigaLane Quick End Launch (QEL SMA) is designed for quick launch at the edge of PCB board up to 18 GHz. Specially designed leg immediately adjusts and firmly holds its attachment with the PCB. It is ideal solution for all active & speedy tests required in R&D. When compared with conventional end launch connector, it will effectually reduce soldering and assembly time when deployed in mass production. Easy & Speedy insertion 0 Return Loss [db] Uniquely designed legs maneuvers smoothly and evenly to fit the PCB thickness PSF-S PSF-S Quick End Launch JACK Hole 5.05 [0.199] 0.8 [0.031] 8.5 [0.335] 6 [0.236] 8 [0.315] Insertion Loss [db] Built-in tension of legs enables even and firm attachment to the PCB PSF-S PSF-S <DUT> Connector - PSF-S : 2ea Board Clearance 0.25 ~ 1.2mm 1.25 ~ 2.0mm PCB - FR4 Sub Thickness : 0.6mm - 50 Ω Line Width : 1.2mm - Line Length : 18mm RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix Frequency [GHz] *As described in the table, 2 product specifications are available to accordingly cover all common PCB thicknesses. GigaLane Co., Ltd. sales@gigalane.com 23

19 High Performance End Launch Connectors GigaLane VEREND (Vertical-End launch) SMA Connector is designed for applications such as circuit boards for SMD(Surface Mounted Device) and for vertical mounting on RF test boards. It has excellent electrical transition on right angle section up to 18 GHz. SMA Connector (P/N: VSF-S00-000) Measurement Data Frequency [GHz] JACK (Female) 8.5 [0.335] 8.75 [0.344] [0.600] 8.5 [0.335] 6.5 [0.256] 8.5 [0.335] 12 [0.472] 13 [0.512] [0.600] 0.5 [ 0.020] 6.5 [0.256] 0.75 [0.030] 6.5 [0.256] 8.5 [0.335] 4.5 [0.177] 2 [0.079] 1 [0.039] 6.5 [0.256] 4.5 [0.177] 0.5 [0.020] VSF-S VSF-S Washer Nut(Hex) 8 [0.315] 8.5 [0.335] 0.75 [0.030] 6.5 [0.256] 8.5 [0.335] 8.5 [0.335] 0.75 [0.030] 6.5 [0.256] 8.5 [0.335] 9.95 [0.392] [0.431] 13.7 [0.539] 14.7 [0.579] [0.687] 6.5 [0.256] 4.5 [0.177] 11.9 [0.468] 12.9 [0.508] 13.7 [0.539] 6.5 [0.256] 4.5 [0.177] 0.5 [ 0.020] 0.5 [ 0.020] 0.5 [0.020] VSF-S [0.059] Max Panel VSF-S Where signal & Connectivity is needed, There is GigaLane

20 High Performance SMA Connectors Introduction GigaLane High Performance SMA Connectors are designed for applications up to 26.5 GHz in the common high frequency substrates and it is suitable for military and microwave frequencies. Interface Standards (MIL-STD-348) Specification Electrical Frequency High performance SMA DC ~ 26.5 GHz Impedance Insulation Resistance Dielectric Withstand Voltage Contact resistance - Outer Conductor - Inner Conductor Insertion Loss RF Leakage Power Handling Mechanical 50 Ω 1.2 : 1 (@ 18 GHz) 1.3 : 1 (@ 26.5 GHz) 5000 MΩ 1000 Vrms max 2mmΩ max 3mmΩ max 0.4 db max (@ 26.5 GHz) -90 db Mating Cycle(Durability) 500 Recommended Mating torque Proof torque Coupling nut retention force Center contact retention force Environmental Temperature Thermal Shock Corrosion (Salt Spray) Shock Vibration (Jack) GHz 0.9 ~ 1.13 Nm / 8 ~ 10 lbs 1.7 Nm / 15.0 lbs 270 N / 27.7 kfg / 61 lbs 2.6 pound (axial) -40 C to C (Plug) MIL-STD-202, method 107, test condition B MIL-STD-202, method 101, test condition B, 5% salt MIL-STD-202, method 213, test condition I MIL-STD-202, method 204, test condition D Moisture resistance MIL-STD-202, method 106 RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix Materials Body Center Contact Stainless Steel Brass Beryllium Copper(BeCu) Brass Insulator PTFE - Passivated Gold Plated Gold Plated Gold Plated GigaLane Co., Ltd. sales@gigalane.com 25

21 High Performance SMA Connectors DC to 26.5 GHz Mechanically Compatible with SMA 2.92mm Connectors Suitable for High-speed Wireless application JACK (Female) Panel Mount (4 HOLE, 12.8mm SQUARE) Panel Mount (2 HOLE, 15.9mm LONG) 0.5 [0.020] 1 [0.039] [ 0.102] 0.4 [0.016] 2.1 [0.083] A 3.18 [0.125] [ 0.106] 12.2 [0.480] 15.9 [0.626] PSF-S [0.373] 1.65 [0.065] 8.8 [0.346] 12.8 [0.504] Panel Mount Jack (4 HOLE, 12.8mm SQUARE) DIM A PSF-S [0.03] PSF-S [0.06] 9.47 [0.373] 1.65 [0.065] Panel Mount (2 HOLE, 15.9mm LONG) 5.7 [0.224] 0.4 [0.016] 2.1 [0.083] A 3.18 [0.125] [ 0.102] A 0.3 [0.012] 0.7 [0.028] 12.2 [0.480] 15.9 [0.626] 1.65 [0.065] 8.8 [0.346] 9.47 [0.373] 12.8 [0.504] DIM A PSF-S [0.03] PSF-S [0.06] DIM A PSF-S [0.08] PSF-S [0.14] 9.47 [0.373] 0.5 [0.020] 1.65 [0.065] 5.7 [0.224] 2 HOLE Panel Shroud (No Center Contact) 0.3 [0.012] 0.65 [0.026] B A 1.6 [0.063] DIM L DIM A DIM B DIM C PSF-S PSF-S PSF-S PSF-S [0.080] 3.50 [0.140] 2.10 [0.080] 3.50 [0.140] [0.550] [0.550] [0.630] [0.630] [0.400] [0.400] [0.480] [0.480] 4.75 [0.190] 4.75 [0.190] 5.70 [0.220] 5.70 [0.220] 11.1 [0.437] 0.45 [0.018] L 1.52 [0.060] C Panel Mount Field Replaceable (EMI Shielding) DIM L DIM A DIM B DIM C PSF-S PSF-S PSF-S PSF-S PSF-S PSF-S PSF-S PSF-S [0.012] 0.38 [0.015] 0.46 [0.018] 0.51 [0.020] 0.30 [0.012] 0.38 [0.015] 0.46 [0.018] 0.51 [0.020] [0.55] [0.55] [0.55] [0.55] [0.63] [0.63] [0.63] [0.63] [0.40] [0.40] [0.40] [0.40] [0.48] [0.48] [0.48] [0.48] 4.75 [0.19] 4.75 [0.19] 4.75 [0.19] 4.75 [0.19] 5.70 [0.22] 5.70 [0.22] 5.70 [0.22] 5.70 [0.22] 0.05 [0.002] 1.52 [0.060] 11.1 [0.437] C B A 26 Where signal & Connectivity is needed, There is GigaLane

22 SMA Connectors Introduction GigaLane SMA(Sub Miniature A) connectors are widely used in the frequency range DC to 18 GHz with low loss characteristics. SMA connectors are most used in military, microwave frequencies and telecommunication application. Interface Standards (MIL-STD-348) Specification Electrical Frequency SMA DC ~ 18 GHz Impedance (Jack) Insulation Resistance Dielectric Withstand Voltage Contact resistance - Outer Conductor - Inner Conductor RF Leakage Power Handling 50 Ω Mechanical Mating Cycle(Durability) 500 Recommended Mating torque Proof torque Coupling nut retention force Center contact retention force 1.2 : 1 (@ 6G Hz) 1.3 : 1 (@ 18 GHz) 5000 MΩ 1000 Vrms max 2mmΩ max 3mmΩ max -90 db GHz 0.9 ~ 1.13 Nm / 8 ~ 10 lbs 1.7 Nm / 15.0 lbs 270 N / 27.7 kfg / 61 lbs 2.6 pound (axial) (Plug) Environmental Temperature -40 C to C Thermal Shock MIL-STD-202, method 107, test condition B Corrosion (Salt Spray) MIL-STD-202, method 101, test condition B, 5% salt Shock MIL-STD-202, method 213, test condition I Vibration MIL-STD-202, method 204, test condition D Moisture resistance MIL-STD-202, method 106 RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix Materials Body Brass Gold Plated Center Contact Brass Gold Plated Insulator PTFE - GigaLane Co., Ltd. sales@gigalane.com 27

23 SMA Connectors DC to 18 GHz Mechanically Compatible with SMA 2.92mm Connectors High reliability, Durability and Mechanical stability JACK (Female) Panel Mount with Round Pin (4 HOLE, 12.7mm SQUARE) Panel Mount with Flat Pin (4 HOLE, 12.7mm SQUARE) 0.5 [0.020] [ 0.102] 0.13 [0.005] [ 0.102] PAF-S Panel Mount with Solder Pot Pin (4 HOLE, 12.7mm SQUARE) PAF-S [0.051] 1.7 [0.067] 8.6 [0.339] 9.5 [0.374] 12.7 [0.500] 0.8 [0.031] 1.27 [0.050] 2.5 [0.098] 5.15 [0.203] 1.7 [0.067] 8.6 [0.339] 9.5 [0.374] 12.7 [0.500] [ 0.102] PAF-S Panel Mount with Solder Pot Pin (2 HOLE, 15.9mm LONG) PAF-S [0.067] 8.6 [0.339] 9.5 [0.374] 12.7 [0.500] 9.5 [0.374] 1.5 [0.059] PAF-S [0.031] 1.27 [0.050] 1.7 [0.067] 2.5 [0.098] 5.15 [0.203] 12.2 [0.480] A 15.9 [0.626] 5.7 [0.224] PCB Mount (13.5mm LONG) PAF-S [0.050] 1.02 [0.040] Panel Mount (4 HOLE, 12.7mm PAF-S SQUARE) 1.27 [0.050] 4.1 [0.161] [ 0.102] PAF-S * PCB Pattern See Page 90p Fig [0.308] 9.47 [0.373] [0.522] JACK (Female) End Launch (13.27mm PAF-S LONG) 1 [0.039] 3 [0.118] 6 [0.236] 8 [0.315] PAF-S05-000~ [0.148] 13.5 [0.531] 0.5 [ 0.020] 4 [0.157] 4.5 [0.177] Right Angle PCB Mount 6.3 [0.248] DIM A PAF-S [0.024] PAF-S [0.031] PAF-S [0.039] PAF-S [0.043] PAF-S [0.047] PAF-S [0.051] PAF-S [0.059] PAF-S [0.063] PAF-S [0.068] PAF-S [0.083] PAF-S [0.089] PAF-S [0.142] * PCB Pattern See Page 90p Fig 4 PAF-S * PCB Pattern See Page 90p Fig 3 Panel Mount (4 HOLE, 15.9mm LONG) PAF-S [0.374] 9.5 [0.374] 1.7 [0.067] PAF-S [0.067] 2 [0.079] 5 [0.197] 1.27 [0.050] 4.1 [0.161] 2 [0.079] 5 [0.197] PAF-S Right Angle Panel Mount (4 HOLE) 8.6 [0.339] 12.7 [0.500] 12.2 [0.480] 15.9 [0.626] 5.7 [0.224] PAF-R * PCB Pattern See Page90p Fig [0.587] 1.27 [0.050] 13.5 [0.531] 4.5 [0.177] 4 [0.157] 6.4 [0.252] 1.02 [0.040] 6.4 [0.252] PAF-R * PCB Pattern See Page 90p Fig 3 Right Angle Panel Mount (2 HOLE) [0.593] 11.5 [0.453] 6.5 [0.256] 8.25 [0.325] 1.27 [0.050] 4.1 [0.161] 2 [0.079] 5 [0.197] 1.6 [0.063] [ 0.102] 8.6 [0.339] 12.7 [0.500] 11.5 [0.453] 1.27 [0.050] 4.1 [0.161] 4.1 [0.161] 15.9 [0.626] 12.2 [0.480] [0.593] 8.25 [0.325] 2 [0.079] 5 [0.197] 1.6 [0.063] 2-2 1/4" ] 7] 5.7 [0.224] PAF-R * PCB Pattern See Page 90p Fig 3 28 Where signal & Connectivity is needed, There is GigaLane

24 SMA Connectors for Cable Assemblies For Semi-Rigid & Semi-Flexible Cable Assemblies Straight PLUG(Male) Right Angle PLUG(Male) Hex-Nut 8 [0.315] Hex-Nut 8 [0.315] 6.6 [0.260] Cable 047 AMS AMS AMS23 Bulkhead JACK(Female), 11mm HEX Cable 085 AFS AFS02 Cable 034 AFS AFS AFS AFS36 Cable RG316 AMS05 RG178 AMS06 RG400 AMS07 Washer Nut(Hex) 8 [0.315] 3.0 [0.118] Max Panel 2.2 [0.087] 13.6 [0.535] 16.7 [0.657] [0.455] Straight JACK(Female) 2.35 [0.093] 11.1 [0.437] Right Angle PCB Mount 2.2 [0.087] Hex 11 [0.433] Bulkhead JACK(Female), 11mm HEX AMS [0.230] 14 [0.551] 6 [0.236] For Flexible Cable Assemblies Washer Panel Mount JACK (4 HOLE, 12.7mm SQUARE) Hex-Nut 8 [0.315] 5.5 [0.217] 15.3 [0.602] 1.7 [0.067] 9.5 [0.374] 12.7 [0.500] AFS07 Cable 085 AMR AMR [0.254] [0.635] Bulkhead JACK(Female), 8.0mm HEX Cable 085 AFS AFS03 Washer Nut(Hex) 8 [0.315] 3.0 [0.118] Max Panel 1.8 [0.071] 13.2 [0.520] 16.1 [0.634] Hex 8 [0.315] Panel Mount JACK (2 HOLE, 15.9mm LONG) Cable 047 AFS AFS AFS [0.339] 12.7 [0.500] [ 0.102] 1.7 [0.067] 9.5 [0.374] 12.7 [0.500] Right Angle Panel Mount (4 HOLE) Cable RG316 AMR03 RG178 AMR04 RG400 AMR05 Cable 047 AFS AFS AFS09 Hex-Nut 8 [0.315] Bulkhead JACK(Female), 8.0mm AMR03 HEX Washer 12.2 [0.480] 15.9 [0.626] 5.7 [0.224] 8.6 [0.339] 4.6 [0.181] 5.85 [0.230] [0.635] 6.6 [0.260] 10.3 [0.406] 8.6 [0.339] 13.6 [0.535] RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix Nut(Hex) 8 [0.315] Nut(Hex) 8 [0.315] Cable RG316 AFS10 RG178 AFS11 RG400 AFS [0.118] Max Panel 2.2 [0.087] 13.6 [0.535] 16.7 [0.657] Hex 11 [0.433] 5.85 [0.230] Cable RG316 AFS14 RG178 AFS15 RG400 AFS [0.118] Max Panel 1.7 [0.067] 12.7 [0.500] 18.2 [0.717] Hex 8 [0.315] 5.85 [0.230] AFS01 AFS14 GigaLane Co., Ltd. sales@gigalane.com 29

25 MCX Connectors Introduction GigaLane MCX Connectors are intended for use with microwave application requiring excellent performance up to 6G Hz in 50 Ohm impedance. MCX connectors are similar in design to SMB connectors but smaller than SMB connectors. Typical applications for MCX connectors include GPS, wireless communication and automotives. Interface Standards (MIL-STD-348) Unit : mm Specification (Jack) (Plug) Electrical Frequency Impedance Insulation Resistance Dielectric Withstand Voltage Contact Resistance - Outer Conductor - Inner Conductor RF Leakage Power Handling DC to 6 GHz 50 Ω 1.2 : 1 to 6 GHz 5000 MΩ 750 Vrms max 2mmΩ max 6mmΩ max > 60 db 50W (@ 2 GHz) Mechanical Mating Cycle(Durability) 500 Engagement and Separation Force 3.5 kgf max (34.3 N max) Contact Captivation 1.0 kgf Min. (9.8 N Min) Mating Torque 6 pound max Coupling Nut Retention Force 1.8 pound Min. Center Contact Retention Force 2.25 pound (axial) Environmental Temperature -40 C to C Thermal Shock CECC Corrosion (Salt Spray) CECC Vibration CECC Moisture Resistance CECC Materials Body Brass/Beryllium Copper(BeCu) Gold Plated Center Contact Brass/Beryllium Copper(BeCu) Gold Plated Insulator PTFE - *Note : These characteristics are typical but may not apply to all connectors. 30 Where signal & Connectivity is needed, There is GigaLane

26 MCX Connectors JACK (Female) PCB Mount PCB Mount Plug(Male) 4.9 [0.193] PCB Edge Mount 3.05 [0.120] Right Angle PCB Mount 5 [0.197] 0.95 [ 0.037] 0.3 [0.012] 2.8 [0.110] 2.5 [0.098] 4.2 [0.165] 3.75 [0.148] 6 [0.236] PDF-S [0.325] PDF-S * PCB Pattern See Page 90p Fig 5 * PCB Pattern See Page 90p Fig [0.366] 4.8 [0.189] 4.8 [0.189] 0.2 [0.008] 0.95 [0.037] 6 [0.236] 8 [0.315] 2.03 [0.080] 6.63 [0.261] PDF-S PDF-S * PCB Pattern See Page 90p Fig 8 * PCB Pattern See Page 90p Fig [ 0.037] 3 [0.118] 3.5 [0.138] 3.5 [0.138] 4.6 [0.181] PDF-R PDF-R [0.374] 6 [0.236] * PCB Pattern See Page 90p Fig 6 * PCB Pattern See Page 90p Fig 7 Straight PLUG 4.2 [0.165] 9.4 [0.370] 11.9 [0.469] DMS01 PCB Mount 4.5 [0.177] 0.3 [0.012] 3.2 [0.126] 8.4 [0.331] 2.5 [0.098] 5 [0.197] 6 [0.236] 5 [0.197] 10 [0.394] 0.3 [0.012] 4 [0.157] Panel Mount (2 HOLE 16mm LONG) 0.95 [ 0.037] 4.4 [0.173] MCX Connectors for Cable PDM-S Assemblies For Semi-Rigid & Semi-Flexible Cable Assemblies Cable 047 DMS DMS01 For Flexible Cable Assemblies Straight PLUG Cable 047 DMR DMR01 5 [0.197] 5 [0.197] 5 [0.197] 1.3 [0.051] 13.2 [0.520] Right Angle PCB Mount 4.8 [0.189] 9.5 [0.374] PDM-S * PCB Pattern See Page 90p Fig [0.008] 6 [0.236] Right Angle PLUG 8.25 [0.325] 8.25 [0.325] 6.1 [0.240] 6.4 [0.252] 5 5 [0.197] [0.197] Right Angle PLUG 0.8 [0.031] 6 [0.236] [0.295] 6 [0.236] 0.95 [ 0.037] 12.2 [0.480] 16 [0.630] 0.95 [ 0.037] 3 [0.118] 4.2 [0.165] [0.165] [0.165] [0.339] [0.339] 5 [0.197] DMR01 5 [0.197] RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix 5 [0.197] Cable RG178 DMS05 RG316 DMS [0.165] 9.4 [0.370] 11.9 [0.469] 5 [0.197] Cable RG178 DMR04 RG316 DMR [0.416] 3.3 [0.130] 4.2 [0.165] 8.6 [0.339] 5 [0.197] DMS01 DMR02 GigaLane Co., Ltd. sales@gigalane.com 31

27 MMCX Connectors Introduction GigaLane MMCX Connectors are intended for use in applications where the smallest dimensions are required. These connectors operate up to 6 GHz and are optimum for wireless communication systems such as cellular, wireless and PCS. MMCX provides a low RF-leakage by its non-slotted outer contract. Interface Standards (MIL-STD-348) Unit : mm (Jack) (Plug) Specification Electrical Frequency Impedance Insulation Resistance Dielectric Withstand Voltage Contact Resistance - Outer Conductor - Inner Conductor RF Leakage Power Handling DC to 6 GHz 50 Ω 1.3 : 1 to 6 GHz 1000 MΩ 250 Vrms max 2mmΩ max 6mmΩ max > 50 db@ 3 GHz 50W (@ 2 GHz) Mechanical Mating Cycle(Durability) 500 Engagement and Separation Force 3.5 kgf max (34.3N max) Center Contact Retention Force 2.25 pound (axial) Environmental Temperature -40 C to C Thermal Shock CECC Corrosion (Salt Spray) CECC Vibration CECC Moisture Resistance CECC Materials Body Brass/Beryllium Copper(BeCu) Gold Plated Center Contact Brass/Beryllium Copper(BeCu) Gold Plated Insulator PTFE - 32 Where signal & Connectivity is needed, There is GigaLane

28 MMCX Connectors JACK (Female) PCB Mount PCB Mount 3.4 [0.134] 0.75 [0.030] 1.85 [0.073] 3 [0.118] 3.4 [0.134] PCB Edge Mount 0.7 [ 0.028] 3.45 [0.136] 5 [0.197] 6.5 [0.256] PEF-S PEF-S * PCB Pattern See Page 90p Fig 10 * PCB Pattern See Page 90p Fig [0.138] PEF-S * PCB Pattern See Page 90p Fig 13 Cable RG178 EFS01 RG316 EFS [0.175] 5.45 [0.215] Straight PLUG Straight JACK 0.7 [0.028] 1.4 [0.055] 0.7 [ 0.028] 3.4 [0.134] 4.5 [0.177] 3.3 [0.130] 4.5 [0.177] Right Angle PCB Mount 3.45 [0.136] PEF-R * PCB Pattern See Page 90p Fig 12 MMCX Connectors for Cable Assemblies For Semi-Rigid & Semi-Flexible Cable Assemblies Cable 047 EMS EMS02 Cable RG178 EMS04 RG316 EMS01 Straight PLUG For Flexible Cable Assemblies EMS [0.150] 4.2 [0.165] 3.8 [0.150] 8.2 [0.323] 13.2 [0.520] 9.4 [0.370] 11.9 [0.469] 8 [0.315] 12 [0.472] 5 [0.197] Cable 047 EMS EMS03 Cable RG178 EMR04 RG316 EMR01 Cable RG178 EFS04 RG316 EFS [0.256] 0.3 [0.012] 4.3 [0.169] 6.5 [0.256] Right Angle PLUG EMR [0.217] Right Angle PLUG 4.5 [0.177] Bulkhead JACK 6.5 [0.256] 9 [0.354] 2.35 [0.093] UNS-2A 4.83 [0.190] 9 [0.354] 2.35 [0.093] Nut(Hex) 6 [0.236] 18.2 [0.717] 0.7 [ 0.028] 1.85 [0.073] 3.45 [0.136] 0.7 [ 0.028] 3.5 [0.138] 2.04 [0.080] 3.5 [0.138] 3.5 [0.138] 6.95 [0.274] 6.95 [0.274] 10 [0.394] 7.2 [0.283] RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix EFS02 GigaLane Co., Ltd. sales@gigalane.com 33

29 N-Type Connectors Introduction GigaLane N-type connectors are designed for applications up to 11 GHz Because of the endurance, it is optimum for high power fixed wireless communication equipments. Interface Standards (MIL-STD-348) Unit : mm Specification Electrical Frequency Impedance Insulation Resistance Dielectric Withstand Voltage Contact Resistance - Outer Conductor - Inner Conductor Insertion Loss RF Leakage Power Handling (Jack) DC ~ 11 GHz 50 Ω 1.2 : 1 to 11 GHz 5000 MΩ 1200 Vrms max 1mmΩ max 1mmΩ max 0.2 db 11 GHz > 60 db 50W (@ 2 GHz) (Plug) Mechanical Mating Cycle(Durability) 500 Recommended Mating Torque Proof Torque Coupling Nut Retention Force Contact Captivation 0.68 ~ 1.33 Nm / 5 ~ 12 lbs 1.73 Nm / 15.0 lbs 45.8 kgf (450N) 2.8 kgf Min. (28N Min.) Environmental Temperature -40 C to C Thermal Shock MIL-STD-202, method 107, test condition B Corrosion (Salt Spray) MIL-STD-202, method 101, test condition B, 5% salt Vibration MIL-STD-202, method 204, condition B (20G) Shock MIL-STD-202, method 213, condition I (100G) Moisture Resistance MIL-STD-202, method 106 Materials Body Brass Ni Plated Center contact Beryllium Copper(BeCu) Brass Insulator PTFE - Gaskets Silicon - Gold Plated Ni Plated 34 Where signal & Connectivity is needed, There is GigaLane

30 N-Type Connectors JACK (Female) Panel Mount (4 HOLE, 25.4mm SQUARE) Panel Mount (4 HOLE, 17.5mm SQUARE) 5/8"-24 UNEF-2A 5/8"-24 UNEF-2A 3.2 [ 0.126] 3 [ 0.118] 5/8"-24 UNEF-2A 5/8"-24 UNEF-2A 3.2 [ 0.126] 3 [ 0.118] 3.2 [ 0.126] 3 [ 0.118] PNF-S * PCB Pattern See Page 90p Fig [0.531] 13.5 [0.531] 16.7 [0.657] 16.7 [0.657] PNF-S * PCB Pattern See Page 90p Fig [0.736] 18.7 [0.736] PNF-S Bulkhead Mount [0.522] Cable 047 NMS NMS NMS [ 0.119] 3 [0.118] 5 [0.197] 5/8"-24 UNEF-2A 13.5 [0.531] 5 [0.197] 13.9 [0.547] Straight PLUG 19.4 [0.764] 3 [0.118] 22.5 [0.886] 25.7 [1.012] Cross Knurl 20.5 [0.807] 25.4 [1.000] Nut(Hex) 19 [0.748] 20.5 [0.807] 23 [0.906] 18.2 [0.717] 21 [0.827] 3 [0.118] 4 [0.157] Panel Mount (4 HOLE, 25.4mm SQUARE) 5/8"-24 UNEF-2A 5/8"-24 UNEF-2A 13.5 [0.531] 13.5 [0.531] 13.9 [0.547] NMS [0.657] 16.7 [0.657] 18.7 [0.736] 18.7 [0.736] Panel Mount PNF-S PNF-S N-Type Connectors for Cable Assemblies For Flexible Cable Assemblies 2.5 [0.098] 2.5 [0.098] 3.5 [0.138] 3.5 [0.138] NFS03 NFS [0.531] 13.5 [0.531] 16.7 [0.657] 2 [0.079] 18.7 [0.736] 5 [0.197] 2 [0.079] 5 [0.197] Bulkhead Mount (4 HOLE, 25.4mm SQUARE) 5/8"-24 UNEF-2A 5/8"-24 UNEF-2A M14 X P1.0 M14 X P [0.531] 8 [0.315] 13.5 [0.531] 19 [0.748] 25 [0.984] Cable 085 NFS NFS [ 0.126] Straight PLUG 16.7 [0.657] 18.7 [0.736] PNF-S * PCB Pattern See Page 90p Fig 15 PNF-S * PCB Pattern See Page 90p Fig 16 8 [0.315] 3.2 [ 0.126] 18.2 [0.717] 18.2 [0.717] 25.4 [1.000] 25.4 [1.000] 19 [0.748] 25 [0.984] 2 [0.079] For Semi-Rigid & Semi-Flexible Cable Assemblies 12.4 [0.488] 3 [ 0.118] 3.3 [ 0.130] 13.2 [0.520] 18.2 [0.717] 25.4 [1.000] PNF-S PNF-S [ 0.118] 5/8"-24 UNEF-2A PNF-S Right Angle PLUG [0.522] [0.522] 3 [ 0.118] 12.4 [0.488] PNF-S [ 0.119] 2 [0.079] 3.02 [ 0.119] Cable 085 NFS NFS [0.535] 5/8"-24 UNEF-2A 5/8"-24 UNEF-2A 13.5 [0.531] 13.5 [0.531] NFS01 NFS [0.500] 17.5 [0.689] 23 [0.906] 25.2 [0.992] Nut(Hex) 19 [0.748] Nut(Hex) Nut(Hex) 19 [0.748] 19 [0.748] 22.5 [0.886] 22.5 [0.886] 25.7 [1.012] 25.7 [1.012] 12.7 [0.500] 17.5 [0.689] 3 [0.118] 4 [0.157] 9.24 [0.364] [0.827] [0.364] 21 [0.827] 3 [0.118] 3 [0.118] 1.9 [0.075] 1.9 [0.075] RF & MW Connectors RF & MW Adapters Test & Measurement Cable Assemblies Appendix Cross Knurl 20.5 [0.807] 19.4 [0.764] Cable RG316 NMS22 RG400 NMS04 22 [0.866] 30 [1.181] NMS04 GigaLane Co., Ltd. sales@gigalane.com 35