ATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.

Transcription

1 ATBTK-MF-4G Bias Tee Kit, AISG Compatible MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions Depth Height Net Weight Width 39.9 mm 1.6 in mm 5.04 in 0.6 kg 1.3 lb 39.9 mm 1.6 in Regulatory Compliance/Certifications Agency ISO 9001:2008 Included Products Classification Designed, manufactured and/or distributed under this quality management system C100-PSMSB-12M CNT-100 CNT Jumper with interface types SMA Male and SMB Male, 12 m 100PSBM-CR SMB Male (= Female pin) for CNT-100 braided cable 100PSM-CR SMA Male for CNT-100 braided cable CNT-100-FR CNT-100-FR, CNT 50 Ohm Braided Coaxial Cable, black non-halogenated, fire retardant polyolefin jacket ABT-BDFDM-DBTDBT AISG dc 2.1 Dual Band Bias Tee Surge Arrestor (Cylindrical), MHz, with interface types DIN Female Bulkhead and DIN Male page 1 of 15 most current information. Revised: July 13, 2018

2 C100-PSMSB-12M Product Classification Brand Product Series Product Type CNT-100 CNT Jumper with interface types SMA Male and SMB Male, 12 m CNT CNT-100 Braided cable assembly General Specifications Body Style, Connector A Straight Body Style, Connector B Straight Interface, Connector A SMA Male Interface, Connector B SMB Male Length m ft Nominal Size in Specification Sheet Revision Level A Jumper Assembly Sample Label Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz MHz page 2 of 15 most current information. Revised: November 10, 2017

3 C100-PSMSB-12M Regulatory Compliance/Certifications Agency Classification RoHS 2011/65/EU Compliant by Exemption China RoHS SJ/T Above Maximum Concentration Value (MCV) ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system Included Products 100PSBM-CR SMB Male (= Female pin) for CNT-100 braided cable 100PSM-CR SMA Male for CNT-100 braided cable CNT-100-FR CNT-100-FR, CNT 50 Ohm Braided Coaxial Cable, black non-halogenated, fire retardant polyolefin jacket page 3 of 15 most current information. Revised: November 10, 2017

4 100PSBM-CR SMB Male (= Female pin) for CNT-100 braided cable Product Classification Brand Product Type General Specifications Interface Body Style Electrical Specifications Operating Frequency Band Cable Impedance Connector Impedance RF Operating Voltage, maximum (vrms) dc Test Voltage Outer Contact Resistance, maximum Inner Contact Resistance, maximum Insulation Resistance, minimum Average Power Peak Power, maximum Insertion Loss, typical CNT Braided cable connector SMB Male Straight MHz 50 ohm 50 ohm V 500 V 2.50 mohm 5.00 mohm 1000 MOhm MHz 0.60 kw 0.05 db page 4 of 15

5 100PSBM-CR Outline Drawing Mechanical Specifications Outer Contact Attachment Method Crimp Outer Contact Plating Trimetal Inner Contact Plating Gold Inner Contact Attachment Method Solder Interface Durability 500 cycles Interface Durability Method IEC :9.5 Connector Retention Tensile Force 98 N 22 lbf Insertion Force N 2.25 lbf Insertion Force Method IEC :9.3.5 Pressurizable No Dimensions Nominal Size Diameter Length Weight Width in 6.50 mm 0.26 in mm 0.77 in 6.43 g 0.01 lb 6.50 mm 0.26 in page 5 of 15

6 100PSBM-CR Environmental Specifications Operating Temperature Storage Temperature Water Jetting Test Mating Water Jetting Test Method Regulatory Compliance/Certifications -40 C to +85 C (-40 F to +185 F) -65 C to +125 C (-85 F to +257 F) Mated IEC 60529:2001, IP65 Mechanical Shock Test Method IEC Climatic Sequence Test Method IEC Damp Heat Steady State Test Method IEC Thermal Shock Test Method IEC Vibration Test Method IEC Corrosion Test Method IEC Standard Conditions Attenuation, Ambient Temperature 20 C 68 F Average Power, Ambient Temperature 40 C 104 F Average Power, Inner Conductor Temperature 100 C 212 F Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz Agency RoHS 2011/65/EU China RoHS SJ/T ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Insertion Loss, typical 0.05v freq (GHz) (not applicable for elliptical waveguide) page 6 of 15

7 100PSM-CR SMA Male for CNT-100 braided cable Product Classification Brand Product Type General Specifications Interface Body Style Electrical Specifications Operating Frequency Band Cable Impedance Connector Impedance RF Operating Voltage, maximum (vrms) dc Test Voltage Outer Contact Resistance, maximum Inner Contact Resistance, maximum Insulation Resistance, minimum Average Power Peak Power, maximum Insertion Loss, typical CNT Braided cable connector SMA Male Straight MHz 50 ohm 50 ohm V 500 V 2.50 mohm 3.00 mohm 5000 MOhm MHz 0.60 kw 0.05 db page 7 of 15

8 100PSM-CR Outline Drawing Mechanical Specifications Outer Contact Attachment Method Crimp Outer Contact Plating Trimetal Inner Contact Plating Gold Inner Contact Attachment Method Solder Interface Durability 500 cycles Interface Durability Method IEC :9.5 Connector Retention Tensile Force 98 N 22 lbf Insertion Force N 4.95 lbf Insertion Force Method IEC :9.3.5 Pressurizable No Coupling Nut Proof Torque 1.70 N-m 1.25 ft lb Coupling Nut Proof Torque Method IEC :9.3.6 Coupling Nut Retention Force N lbf Coupling Nut Retention Force Method IEC : Dimensions Nominal Size Diameter in 7.92 mm 0.31 in page 8 of 15

9 100PSM-CR Length Weight Width mm 0.72 in 5.74 g 0.01 lb 7.92 mm 0.31 in Environmental Specifications Operating Temperature Storage Temperature Water Jetting Test Mating Water Jetting Test Method Regulatory Compliance/Certifications -40 C to +85 C (-40 F to +185 F) -65 C to +125 C (-85 F to +257 F) Mated IEC 60529:2001, IP65 Mechanical Shock Test Method IEC Climatic Sequence Test Method IEC Damp Heat Steady State Test Method IEC Thermal Shock Test Method IEC Vibration Test Method IEC Corrosion Test Method IEC Standard Conditions Attenuation, Ambient Temperature 20 C 68 F Average Power, Ambient Temperature 40 C 104 F Average Power, Inner Conductor Temperature 100 C 212 F Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz MHz Agency RoHS 2011/65/EU China RoHS SJ/T ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Insertion Loss, typical 0.05v freq (GHz) (not applicable for elliptical waveguide) page 9 of 15

10 CNT-100-FR CNT-100-FR, CNT 50 Ohm Braided Coaxial Cable, black nonhalogenated, fire retardant polyolefin jacket Product Classification Brand Product Series Product Type Construction Materials Jacket Color Jacket Material Braid Material Shield Tape Material Dielectric Material Inner Conductor Material Dimensions Cable Weight Diameter Over Dielectric Diameter Over Jacket Inner Conductor OD Nominal Size Outer Conductor OD Electrical Specifications Cable Impedance Capacitance dc Resistance, Inner Conductor dc Resistance, Outer Conductor dc Test Voltage Jacket Spark Test Voltage (rms) Maximum Frequency CNT CNT-100 Braided coaxial cable Black Non-halogenated, fire retardant polyolefin Tinned copper Aluminum Foam PE Copper 0.02 kg/m mm in mm in mm in in mm in 50 ohm pf/m 31.2 pf/ft ohms/km ohms/kft ohms/km ohms/kft 500 V 1500 V GHz page 10 of 15

11 CNT-100-FR Operating Frequency Band MHz Peak Power 0.6 kw Shielding Effectiveness >90 db Velocity 66% Environmental Specifications Installation Temperature -40 C to +60 C (-40 F to +140 F) Operating Temperature -40 C to +60 C (-40 F to +140 F) Storage Temperature -40 C to +60 C (-40 F to +140 F) General Specifications Cable Type Braid Coverage Packaging Type CNT % braid Reel Mechanical Specifications Bending Moment Flat Plate Crush Strength * Values typical, guaranteed within 5% 0.1 N-m 0.1 ft lb 0.2 kg/mm 10.0 lb/in Minimum Bend Radius, Single Bend 6.40 mm 0.25 in Tensile Strength Electrical Performance 7 kg 15 lb Frequency Attenuation (db/100 m) Attenuation (db/100 ft) 30 MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz page 11 of 15

12 CNT-100-FR Regulatory Compliance/Certifications Agency Classification ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system page 12 of 15

13 ABT-BDFDM-DBT AISG dc 2.1 Dual Band Bias Tee Surge Arrestor (Cylindrical), MHz, with interface types DIN Female Bulkhead and DIN Male AISG dc 2.1 bias tee passes both dc and MHz subcarrier Product Classification Product Type General Specifications Interface Interface 2 Ordering Note Injector Port Interface Antenna Interface Signal BTS Interface Signal Injector Port Interface Signal Body Style Surge arrestor 7-16 DIN Female Bulkhead 7-16 DIN Male CommScope non-standard product SMA Female AISG dc RF dc Blocked RF AISG dc Bulkhead Electrical Specifications Operating Frequency Band MHz MHz 3rd Order IMD dbm dbc 3rd Order IMD Test Method Two +43 dbm carriers Average Power MHz and MHz (Combined) Connector Impedance 50 ohm Injector Port to Antenna Isolation, minimum -70 db Lightning Surge Capability 10 6 ka Lightning Surge Capability Test Method IEEE C Lightning Surge Capability Waveform 8/20 waveform Lightning Surge Current 6 ka Lightning Surge Current Waveform 8/20 waveform Throughput Energy at Current ka Throughput Energy Waveform 8/20 waveform Insertion Loss, typical 0.10 db page 13 of 15 most current information. Revised: June 1, 2018

14 ABT-BDFDM-DBT Outline Drawing Mechanical Specifications Attachment Durability 25 cycles Coupling Nut Proof Torque N-m in lb Coupling Nut Retention Force N lbf Coupling Nut Retention Force Method MIL-C-39012C-3.25, dc Injector Port Inner Contact Plating Gold Inner Contact Plating Silver Interface Durability 500 cycles Interface Durability Method IEC :9.5 Outer Contact Plating Trimetal Pressurizable No Dimensions Height Length Weight Width mm 1.57 in mm 5.04 in 0.60 kg 1.32 lb mm 1.57 in Environmental Specifications page 14 of 15 most current information. Revised: June 1, 2018

15 ABT-BDFDM-DBT Corrosion Test Method MIL-STD-202, Method 101, Test Condition B Immersion Depth 1 m Immersion Test Mating Mated Immersion Test Method IEC 60529:2001, IP68 Mechanical Shock Test Method MIL-STD-202F, Method 213B, Test Condition C Moisture Resistance Test Method MIL-STD-202, Method 106 Operating Temperature -40 C to +85 C (-40 F to +185 F) Storage Temperature -40 C to +85 C (-40 F to +185 F) Thermal Shock Test Method MIL-STD-202, Method 107, Test Condition A-1, Low Temperature -55 C Water Jetting Test Mating Mated Water Jetting Test Method IEC 60529:2001, IP66 Power Supply Throughput Current, typical Voltage Range 1 A -30 V to 30 V Standard Conditions Attenuation, Ambient Temperature 20 C 68 F Average Power, Ambient Temperature 40 C 104 F Return Loss/VSWR Frequency Band VSWR Return Loss (db) MHz MHz Regulatory Compliance/Certifications Agency AISG ISO 9001:2008 * Footnotes Classification Designed, manufactured and/or distributed under this quality management system Immersion Depth Insertion Loss, typical Immersion at specified depth for 24 hours 0.05v freq (GHz) (not applicable for elliptical waveguide) page 15 of 15 most current information. Revised: June 1, 2018