Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System

Size: px
Start display at page:

Download "Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System"

Transcription

1 BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed Copper Durability 500 Cycles Electrical 50 ohm 75 ohm Frequency range 0-4GHz 0-10GHz Working Voltage 50Hz 500Vrms 500Vrms Dielectric Withstand 1500V 1500V VSWR Straight 1.3 max 1.3 max Right Angle 1.5 max 1.5 max Resistance Inner 3 Milliohms 3 Milliohms Outer 2Milliohms 2Milliohms Insulator 5000Megaohms 5000Megaohms Single Crimp Straight Plug B1111x1ND3Gxxx RFX RFX RFX RFX RFX RFX RFX RFX 58/141 Plenum 58/ RFX RFX RFX RFX B1111x1ND3Gxxx75 Crimp Straight Plug Captive B1121x1ND3Gxxx RFX 58/ RFX RFX RFX RFX RFX RFX 58/ RFX RFX RFX RFX RFX B1121x1ND3Gxxx75 Crimp Straight Plug Termination Instruction type 3 - F, type 4 - E, type TPX - G B1121x1ND3Gxxx RFX RFX RFX RFX RFX RFX RFX RFX B1121E9NTPX3Gxxx RFX RFX RFX RFX RFX RFX B1121x1ND3Gxxx75 Clamp/Solder Straight Plug Termination Instruction type 5 - I, type 6 - H B1141x1ND3Gxxx RFX 58/ RFX RFX RFX Plenum 58/ RFX RFX RFX RFX RFX RFX RFX RFX 31-2-RFX 58/ RFX RFX RFX RFX RFX ARFA/RF B1141x1ND3Gxxx75 Desc. 1 2 Desc. 3 Non- Captive TPX Insulator 4 Pin-to- Pin Desc. 5 Captive 6 Non- Captive Environmental Temp. range -65 C thru 165 C Shock Consult Rep Vibration Consult Rep Corrosion Consult Rep Related Information Hand Tools Page W-1 Termination Ins Page U-35~U-38 Terminology Page U-38 Preinstalled Centre for Solid Conductor Cable U-12

2 Non-sealed version Features metal mounting threads mm Panel 5.5mm Panel Isolated from Ground 4.5mm Panel B7471A1ND3Gxx B7471B1ND3Gxx B7771B1ND3Gxx GRFX 50 Ohm N-RFX 50 Ohm RFX 50 Ohm 31220G-75RFX 75 Ohm N-75RFX 75 Ohm RFX 75 Ohm Supplied with isolating washers Isolated from Ground 3.2mm Panel Isolated from Ground 5.5mm Panel Jack-to-Jack Straight Adapter B7771B2NPBT3Gxx B7771B3ND3Gxx B7071A1ND3Gxx RFX 50 Ohm RFX 50 Ohm RFX 50 Ohm RFX 75 Ohm RFX 75 Ohm Ohm Jack-to-Jack Straight Adapter Jack-to-Jack-to-Jack Tee Adapter Jack-to-Plug-to-Jack Tee Adapter B7071A1ND3Gxx B8073A1ND3Gxx B9073D1ND3G RFX 50 Ohm RFX 50 Ohm RFX 75 Ohm RFX 75 Ohm RFX 50 Ohm Plug-to-Plug Straight Adapter Plug-to-Jack Right Angle Adapter Jack-to-Plug-to-Jack Tee Adapter B2071x2ND3Gxx B5072x1ND3Gxx B9073x1ND3Gxx RFX 50 Ohm Bayonet RFX 50 Ohm Bayonet BRFX 50 Ohm Bayonet RFXD 50 Ohm Bayonet 31-9-RFX 50 Ohm Bayonet RFX 50 Ohm Bayonet RFX 75 Ohm Bayonet RFX 75 Ohm Bayonet RFX 75 Ohm Bayonet RFX 75 Ohm Bayonet RFX 75 Ohm Bayonet RFX 75 Ohm Bayonet ARFA /RF U-16

3 Clamp/Solder Straight Jack Termination Instruction type I B6141A1ND3Gxxx50 Part Number: Cable Insulator Part Number Cable /Insul 31-5-RFX 58/ RFX Plenum RFX 58/141 Delrin Delrin RFX RFX 59/62 Plenum 59/ RFX Plenum 59/62 Solder-Terminal s - Straight Bulkhead Jack Part Number: Description Part Number Description B6141A1ND3Gxxx75 Figure Fig RFX 4-Hole Flange Mount Teflon Insulator B6551A1NT3G RFX 4-Hole Flange Mount Teflon Insulator B6551A1NT3G75 Fig RFX Solder-Pot L1:3.2mm L:26.7mm B6351xxNDxx RFX Solder-Pot L1:3.2mm L:26.7mm B6351xxNDxx75 Fig RFX RFX Solder-Pot L1:6.5mm L:30.0mm B6351xxNDxx50 Solder-Pot L1:9.5mm L:33.0mm B6351xxNDxx RFX RFX Solder-Pot L1:6.5mm L:30.0mm B6351xxNDxx75 Solder-Pot L1:9.5mm L:33.0mm B6351xxNDxx75 Fig 2 L RFX Solder-Pot Isolated from Ground L1: 3.2mm L:30mm B6651B1NNYL3G RFX Solder-Pot Isolated from Ground L1: 3.2mm L:30mm B6651B1NNYL3G75 L RFX Solder-Tab with Eyelet B6351xxNDxx RFX Solder-Tab with Eyelet B6351xxNDxx75 Fig 3 Missing Eyelet PCB Mount Jacks Part Number: Description Part Number Description B6251xxNx3G50 B6251xxNx3G75 Straight Low Profile L:11.7 Straight Low Profile L: RFX RFX PCB Layout A PCB Layout A Straight Low Profile L:10.8 Straight Low Profile L: RFX RFX PCB Layout C PCB Layout C Straight 3 Peg Straight 3 Peg RFX RFX PCB Layout B PCB Layout B Straight Plastic White Bulkhead Straight Plastic White Bulkhead RFX RFX PCB Layout D PCB Layout D Straight Plastic Black Bulkhead Straight Plastic Black Bulkhead RFX RFX PCB Layout D PCB Layout D RFX RFX RFX RFX RFX RFX G11A0299 B6252HxNPP3G50 B6252HxNPP3G75 R/A Plastic White L:15.88mm R/A Plastic White L:15.88mm RFX R/A Plastic Black L:15.88mm R/A Plastic Black L:15.88mm RFX R/A Plastic White L:13.1mm R/A Plastic White L:13.1mm RFX R/A Plastic Black L:13.1mm R/A Plastic Black L:13.1mm RFX R/A Commercial Metal R/A Commercial Metal L:15.88mm Bulkhead RFX L:15.88mm Bulkhead PCB Layout E PCB Layout E R/A Commercial Metal R/A Commercial Metal L:13.1mm Bulkhead RFX L:13.1mm Bulkhead PCB Layout E PCB Layout E R/A Seamless Metal Fig 7 PCB Layout F PCB Layouts Figure Like Fig 6 Fig 6 Fig 5 Fig 4 L Fig 4 Fig 5 Fig 6 L Fig 7 Layout A Layout B Layout C Layout D Layout E Layout F ARFA/RF/AMTA U-15

4 Crimp Straight Pin-to-Pin Jack Termination Instruction type E B6121AG1ND3Gxxx50 Part Number: Cable Insulator Part Number Cable /Insul RFX RFX Delrin RFX B6121AG1ND3Gxxx75 Crimp Straight Bulkhead Jack B6421xNx3Gxxx50 B6421xNx3Gxxx75 Part Number: Cable /Insul Part Number Cable /Insul RFX RFX RFX 58/ RFX RFX RFX RFX RFX RFX 58/ RFX RFX RFX RFX RFX RFX 58/ RFX RFX RFX RFX RFX RFX 58/ RFX RFX RFX Crimp/Crimp Straight Bulkhead Jack Termination Instruction 3 - F, 4 - E B6421x1ND3Gxxx50 Part Number: Cable /Insul Part Number Cable /Insul RFX RFX RFX Delrin B6421x1ND3Gxxx75 Panel 3.5mm 1 6.5mm 1 3.5mm 2 6.5mm 2 Panel 3.5mm 3 3.5mm Panel 6.5mm Panel RFX Pin-to- Pin/Delrin 5mm Like 3.5mm Crimp/Crimp Straight Bulkhead Jack Isolated from Ground B6721x1Nx3Gxxx50 B6721x1Nx3Gxxx75 Part Number: Cable /Insul Part Number Cable /Insul RFX RFX RFX 58/ RFX RFX RFX RFX RFX RFX 58/ RFX RFX RFX RFX RFX RFX Twist-On Straight Jack for Solid Centre Conductor Termination Instruction K B6131A1ND3Gxxx RFX 58/ RFX Plenum 58/ RFX RFX ARFAARFA/RF Panel 6mm 5 6mm 6 6mm U-14

5 Twist-On Straight Plug for Solid Centre Conductor Termination Instruction K B1131x1ND3Gxxx RFX 58/ RFX RFX Plenum 58/ RFX RFX RFX RFX RFX Solder Straight Plug for Semi-Rigid Cable Termination Instruction S B1181A1NT3Gxxx RFX.085 A:2.2 B: RFX.141 A:3.6 B:4.6 Crimp Right Angle Plug B1112x1ND3Gxxx RFX 58/ RFX RFX RFX RFX RFX RFX Plenum 58/ RFX RFX RFX RFX RFX RFX 174/179/ RFX RFX 187/188/ RFX B1112x1ND3Gxxx75 Crimp Right Angle Long Body Plug Termination Instruction type 4/5 - E, type 6 - F B1122x1ND3Gxxx RFX RFX RFX RFX RFX RFX 58/ RFX RFX RFX RFX RFX RFX RFX RFX RFX RFX RFX RFX B1122x1ND3Gxxx75 Crimp Straight Jack Termination Instruction type 7/8 - E, type 9 - F B6121x1Nx3Gxxx50 B6121x1Nx3Gxxx75 Part Number: Cable /Insul Part Number Cable /Insul RFX RFX RFX 58/ RFX RFX RFX RFX Plenum RFX RFX 58/141 Plenum RFX Plenum 59/ RFX RFX 59/ RFX RFX ARFA/RF RFX U-13

6 A A Plug-to-Plug Adapter U-Link Plug-to-Plug Adapter U-Link Plug-to-Jack-to-Plug Adapter U-Link with Tap B2076A1003-NT3G Ohm (A) 18.5mm B4070A2-ND3G Ohm (A) 20mm B2076A1001-NT3G Ohm (A) 20.6mm B4070A3-ND3G Ohm (A) 20.6mm B2076A1002-NT50G Ohm B2076A1004-NT3G Ohm (A) 25mm B4070A1-ND3G Ohm (A) 30mm B2076A1-NT3G Ohm (A) 30mm Filtered BNC Bayonet Lock RF Connector System with Filtering Amphenol s 456 Series of RF connectors provide capacitive decoupling between the connector body and the mounting panel. EMI on the coaxial shield is shunted to the chassis ground through capacitors, while not affecting the DC and power supply frequencies. This reduces ground loop problems and provides a mechanism to harmlessly dissipate ESD to chassis ground. The RF parameters of these connectors are the same as their non-filtered counterparts. Filtering does not affect the signal contact, but only the shell-to-ground connection. Capacitively decoupled RF connectors are intermateable and inter-changeable with standard non-filtered versions. Materials Body/Finish Zinc or /Nickel Phosphor Bronze Centre Finish Gold 30µ Insulator Thermoplastic Durability 500 Cycles PCB Rear Panel Mount Right Angle Jack Filter Performance Capacitance - 10,000 pf Working Volt VDC (500AC Rear Mt) DWV VDC (1000VDC for Rear Mt) Consult representative for alternate Capacitances and Connector Solutions Part Number Description Filtered Filtered 10KpF/1KV Spark Gap S S Filtered 10KpF/1KV Spark Gap/1 MΩ Resistor F F Grounded G G Non-Filtered. Panel Insulated (no ground spring) NF NF Filter Insertion Loss 1 MHz 4 db 5 MHz 16 db 10 MHz 18 db 30 MHz 25 db 50 MHz 30 db 1000 MHz 30 db Vertical PCB Mount Press-Fit Jack Front Panel Mount Right Angle PCB Jack Front Panel Mount Solder-Cup Jack A 75 Ohm Filtered 3.18mm PCB SG 50 Ohm Filtered Ohm Filtered B 75 Ohm Filtered 5.08mm PCB TG 75 Ohm Filtered BNC Patch Panels with Jack to Jack Bulkhead Adapters Jack-to-Jack Adapter Part Number: Description Ohm Filtered 20 way/supplied with strip ID labels 40 way/supplied with strip ID labels Ohm Filtered Part Number AC-BNC20MJ75 Part Number AC-BNC40MJ75 ARFA /RF/ACC/AAL U-17

7 Termination Instructions Amphenol A Cable Solder (Semi-Rigid) B Cable Solder (Semi-Rigid) C Cable Crimp STEP 2. Strip the inner conductor, dielectric, and jacket per RECOMMENDED CABLE STRIPPING DIM S in catalog. STEP 3. Solder the BODY to cable as (Avoid excessive heat which may distort dielectric.) STEP 4. Place the RETAINER RING in the groove of BODY, and put the GASKET in the position as STEP 5. Compress the BODY assembly and assemble the SHELL as STEP 2. Strip the inner conductor, dielectric, and jacket per RECOMMENDED CABLE STRIPPING DIM S in catalog STEP 3. Insert inner conductor into the CONTACT PIN and solder it as shown STEP 4. Solder the MAIN BODY to cable as shown (avoid excessive heat which may distort dielectric). Then press the INSULATOR into the MAIN BODY until it stops. STEP 3. Slide the HEX NUT and FERRULE onto cable. Then insert the BARREL into braid and dielectric, and slide the FERRULE over braid and crimp it as STEP 4. Slide the REAR INSULATOR against the BARREL. Then insert inner conductor into the CONTACT PIN and solder it as STEP 5. Slide the FRONT INSULATOR against the REAR INSULATOR. STEP 6. Insert cable and parts into the MAIN BODY, then screw the HEX NUT until it is tight. D Cable Solder (Semi-Rigid) E Cable Crimp/Crimp F Cable Crimp/Crimp STEP 2. Strip the inner conductor, dielectric, and jacket per RECOMMENDED CABLE STRIPPING DIM S in catalog. STEP 3. Solder inner conductor to the contact pin of MAIN BODY, and solder cable jacket to the MAIN BODY as STEP 4. Screw the NUT into the MAIN BODY until it stops. A crimp tool is necessary to complete the termination. STEP 3. Insert inner conductor into the CONTACT PIN and crimp it with the crimp tool as Then slide the FERRULE onto cable. STEP 4. Insert the MAIN BODY into braid and dielectric. STEP 5. Slide the FERRULE over braid and crimp it with the crimp tool as A crimp tool is necessary to complete RECOMMENDED DIM S in catalog. STEP 3. Insert inner conductor into the CONTACT PIN and crimp it with the crimp tool the FERRULE onto cable. STEP 4. Insert the MAIN BODY into braid and dielectric. STEP 5. Slide the FERRULE over braid and crimp it with the crimp tool as U-35

8 Termination Instructions Amphenol G Cable Crimp/Crimp H Cable Clamp/Solder I Cable Clamp/Solder A crimp tool is necessary to complete the termination. STEP 3. Slide the FERRULE onto cable, then fold back braid wire and slide the SPACER and INSULATOR onto dielectric as STEP 4. Insert inner conductor into the CONTACT and crimp it with the crimp tool as STEP 5. Push cable and parts into the MAIN BODY until it stops. Then slide the FERRULE over braid wire and against the MAIN BODY and crimp it with the crimp tool as STEP 3. Insert inner conductor into the CONTACT and solder it as Then slide the HEX NUT, WASHER, and GASKET onto cable. STEP 4. Place the BRAID CLAMP over braid and push back against cable jacket. Fold back braid wire as STEP 5. Insert cable and parts into the MAIN BODY, then screw the HEX NUT until it is tightened. J Cable Wedge Compression K Cable Twist-On L Cable Clamp STEP 3. Slide the HEX NUT, WASHER, and GASKET onto cable one by one. STEP 4. Place the BRAID CLAMP over braid and push back against cable jacket. Fold back braid wire as shown, and slide the RING and REAR INSULATOR against the BRAID CLAMP. Then insert inner conductor into the CONTACT PIN and solder it. STEP 5. Insert cable and parts into the MAIN BODY, then screw the HEX NUT until it is tightened. STEP 1. STEP 2. STEP 3. STEP 4. dielectric, braid, and jacket as per "RECOMMENDED CABLE STRINPPING DIM'S " in catalog. STEP 3. Slide the HEX NUT onto cable, then insert the CONTACT ASSEMBLY under braid and jacket. STEP 4. Insert cable and parts into the MAIN BODY, then screw the HEX NUT until it is tight. STEP 1. The connector is STEP 3. Twist braid in a clockwise direction so that at least 0.8mm of dielectric is bared, and braid is left flat. STEP 4. Insert inner conductor into the back end of connector gently, and feed it into the contact. STEP 5. Push and screw the connector onto cable in a clockwise direction until it stops. STEP 1. STEP 2. STEP 3. STEP 4. STEP 5. STEP 6. All parts of the connector are Strip the cable inner conductor, STRIPPING DIM S in catalog. Then slide the NUT, WASHER, and GASKET onto cable. Place the BRAID CLAMP over braid and push back against cable jacket. Fold back braid wire as Slide the RING against the BRAID CLAMP. Then insert inner conductor into the CONTACT PINS and solder them. Insert the CONTACT PINs into the INSULATOR until the INSULATOR is against the TOP HAT. Insert cable and parts into the MAIN BODY, aligning slot of the INSULATOR with key in the MAIN BODY. Then screw the NUT until it is tight. U-36

TNC SERIES General... 4 Interface... 5 Characteristics...6-7

TNC SERIES General... 4 Interface... 5 Characteristics...6-7 CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...

More information

Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications

Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving

More information

Amphenol RF- BNC Connector Series

Amphenol RF- BNC Connector Series Page 1 of 7 enter part number Products 7/16 1.0/2.3 1.6/5.6 AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini-UHF Mini 75 Ohm SMB MMCX Precision (APC) QDS QMA QWS SC SlimLine BNC SMA / RP-SMA SMB SMC SMP TNC

More information

242, , FAX.

242, , FAX. TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz

More information

RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes

RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight

More information

SECTION 7 R114 / R115 / R116 / R117 / R112

SECTION 7 R114 / R115 / R116 / R117 / R112 SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead

More information

Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.

Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality. Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors

More information

SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack

SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack

More information

SMA - 50 Ohm Connectors

SMA - 50 Ohm Connectors For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,

More information

SERIESN50, COAXIAL CONNECTORS

SERIESN50, COAXIAL CONNECTORS SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.

More information

SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST

SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series

More information

Amphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications

Amphenol RF UHF. UHF Connector Series UHF. Description. Features/Benefits. Applications Amphenol RF 136 Connector Series Description Invented in the 1930 s by an Amphenol Engineer named E. Clark Quackenbush, coaxial connectors are general purpose units developed for use in low frequency systems

More information

BNC Connectors (50 ohm/75 ohm)

BNC Connectors (50 ohm/75 ohm) BNC Connectors (50 ohm/75 ohm) Product Facts Bayonet lock coupling for quick connect/disconnect Various connectors available in 50 and 75 ohm versions Fully intermateable with comparable BNC UG/U connectors

More information

SMA Description Applications Features

SMA Description Applications Features MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,

More information

SMB Connectors. RF Coax Connectors. Product Facts

SMB Connectors. RF Coax Connectors. Product Facts SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are

More information

STANDARD COAXIAL CONNECTORS. Eco 7/16 series

STANDARD COAXIAL CONNECTORS. Eco 7/16 series STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,

More information

Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications

Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility

More information

Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications

Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the

More information

ReversePolarity Series(SMA,BNC,TNC)

ReversePolarity Series(SMA,BNC,TNC) RP ReversePolarity Series(SMA,BNC,TNC) Description Reverse polarity BNC, TNC, N & SMA connectors (RP-BNC, RP-TNC, RP-SMA) are designed for uses in wireless applications where a non-standard interface has

More information

SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214

SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6

More information

TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100

TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100 TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms

More information

INTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS

INTRODUCTION A WIDE STANDARD RANGE MANY FULL CRIMP MODELS LOW INTERMODULATION CONNECTORS N INTROUCTION The new Radiall N series has been developed using the latest advances in connector design. These connectors are easy--to--use, highly reliable, innovative and are designed to meet the needs

More information

242, , FAX.

242, , FAX. TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz

More information

242, , FAX.

242, , FAX. TEL. 886 2 8994 1601, AX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information Subminiature Connectors Subminiature Connectors Snap Lock 50 Ω 18 GHz 50 Ω 75 Ω 4 GHz 3 GHz

More information

From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz).

From dc to 10 GHz the. VSWR shall not exceed 1.3 &.04 (f) where f is the frequency in Gigahertz (GHz). 121 Series Coaxial Snap On & Screw On Types / 50 Ohm & 75 Ohm These 50 and 75 Ohm coaxial connectors are easily inserted into your printed circuit board using an insertion tool. Solder is eliminated and

More information

SECTION 12. N / Composite N / N 18 GHz R161 / R162 / R163

SECTION 12. N / Composite N / N 18 GHz R161 / R162 / R163 SECTION 12 12 N / Composite N / N 18 GHz R161 / R162 / R163 Contents Introduction... 12-4 to 12-5 N 50Ω and Composite N Interface... 12-6 Characteristics... 12-8 to 12-9 ECO N characteristics... 12-9

More information

Electrical Components Catalog RF Connectors

Electrical Components Catalog RF Connectors Introduction Product Facts Designed and Manufactured to meet MI-C-39012 Requirements Wide Range of Connectors available in 50 and 75 Ohm Impedance The range offers connectors to suit from DC-11 GHz Operation

More information

N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219

N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 RF Connectors Technical Data Sheet PE4433 Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications

More information

kwiqmate Connectors Product Catalog Johnson

kwiqmate Connectors Product Catalog Johnson Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured

More information

RF COAXIAL CONNECTORS

RF COAXIAL CONNECTORS RF COAXIAL CONNECTORS 17550 Gillette Avenue, Irvine, California 92614 www.sabritec.com Telephone (949) 250-1244 Fax (949) 250-1009 157 CoAXIAL CONNECTORS SCX Coaxial INTRODUCTION Sabritec offers a complete

More information

RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A

RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, 0240 inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A RF Connectors Technical Data Sheet PE44670 Configuration TNC Male Reverse Polarity Connector

More information

sealed mini usb connectors

sealed mini usb connectors QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

More information

7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215

7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215 7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver

More information

7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393

7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features

More information

7/16 GENERAL. DC GHz GENERAL APPLICABLE STANDARDS APPLICATIONS

7/16 GENERAL. DC GHz GENERAL APPLICABLE STANDARDS APPLICATIONS GENERAL 50 Ω C - 7.5 GHz GENERAL Standard coaxial connectors Screw--on coupling High power rating Excellent RF performance APPLICABLE STANARS IEC 169-4 IN 47223 22 190 APPLICATIONS Mobile communication

More information

TNC Series. Interface Mating Dimensions. Coaxial Connectors

TNC Series. Interface Mating Dimensions. Coaxial Connectors TNC connectors are designed with a Highly reliable threaded coupling to ensure additional protection against shocks and vibrations. They are dimensionally and electrically similar to the BNC series, and

More information

D Subminiature Combo D

D Subminiature Combo D Cable ( 8) Loose Contacts Coaxial 75 Ohm Stamped Crimp/Crimp Recommended Wire Trim Dimensions Kit (ody, Ferrule, Center Contact) Stamped Crimp/Crimp Kit Kit 30 in. Kit 50 in. RG Cable Number D130322-2

More information

Corning Gilbert Inc. Microwave Push-on Interconnects 1

Corning Gilbert Inc. Microwave Push-on Interconnects 1 Corning Gilbert Inc. Microwave Push-on Interconnects 1 GPO Specifications General Characteristics Impedance 50 ohms nominal Frequency range DC to 40 GHz Temperature range -65 C thru 165 C Electrical Characteristics

More information

711 Series Single Way DB-1a

711 Series Single Way DB-1a 711 Series Single Way DB-1a Data Bus Interconnection System Data Bus Interconnection System designed for data transmission as defined by MIL-STD-1553B, STANAG 3838 and DEF STAN 00-18 (Part 2). This system

More information

GPPO Interconnect Series Product Information

GPPO Interconnect Series Product Information GPPO Interconnect Series Product Information A sub-miniature, push-on, high performance, microwave interconnect system. Developed in response to industry demand for increased package density, lower weight,

More information

MBNC Series. Right Angle, Vertical, Surface Mount Receptical with Terminating Resistors and Filtering Capacitors

MBNC Series. Right Angle, Vertical, Surface Mount Receptical with Terminating Resistors and Filtering Capacitors BNC Connectors MBNC Series - Right Angle, Vertical, Surace Mount Receptical with Terminating Resistors and Filtering Capacitors 10-2 MBNC Series - Right Angle, Vertical, Terminators, and Filtered Board

More information

KCN KCN KCN KCN KCN KCN KCN KCN KCN KCN

KCN KCN KCN KCN KCN KCN KCN KCN KCN KCN series KCN4011200000 KCN4032200040 KCN4041100000 KCN4043110180 KCN4043140000 KCN4011200010 KCN4032200050 KCN4043100000 KCN4043110190 KCN4043140090 KCN4011200020 KCN4041200000 KCN4037100000 KCN4043110220

More information

Tru products are now under the Tru-Win brand from Winchester Interconnect.

Tru products are now under the Tru-Win brand from Winchester Interconnect. TRU MEIA Series Tru-Win MEIA offers the latest innovation in high power connector design. The MEIA interface provides equivalent kw power handling compared to similar EIA connector line sizes but provides

More information

Ø1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT

Ø1,37 (.054) MIN Ø2,67 (.105) MAX Ø1,35 (.053) MAX Ø4,83 (.190) MAX 1,78 (.070) MAX 0,84 (.033) SEE NOTE # 2 1,91 (.075) MIN MIN CLOSED ENTRY CONTACT SSMB / SSMC This range of 50 ohm microminiature radio frequency connectors is suitable for both military and commercial equipment operating at frequencies up to 4 GHz (SSMB) and 12.4 GHz (SSMC). They provide

More information

MMS/MMT MMCX CONTENTS PAGE MMS/MMT

MMS/MMT MMCX CONTENTS PAGE MMS/MMT MMCX CONTENTS PAGE MMS/MMT Introduction... 4 General... 5 Characteristics MMS... 6 Characteristics MMT... 7 Connectors...8-9 Plugs... 10 Standard cable assemblies...11-12 Receptacles... 13 Adapters...

More information

SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch

SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms

More information

Product Manual MNX10050 / REV C MODELS:

Product Manual MNX10050 / REV C MODELS: VIBRATION ANALYSIS HARDWARE Product Manual MNX10050 / REV C MODELS: CC-AXX & JXX CC-C2X & C3X CC-V2R & V3R Field Installable Connector Kits Contents Section I Overview Introduction... 2 Description...

More information

Setting Standards Connectors M 16

Setting Standards Connectors M 16 Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and

More information

SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated

SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188

More information

RF & MW Connectors. 6 Where signal & Connectivity is needed, There is GigaLane

RF & MW Connectors. 6 Where signal & Connectivity is needed, There is GigaLane RF & MW Connectors - 2.4 mm Connectors - 2.92 mm Connectors - Hermetic Seal (0.012 Glass Bead) - SMP Connectors - BMA Connectors - High Performance End Lanch Connectors - High Performance SMA Connectors

More information

RF/Microwave Coaxial Connectors

RF/Microwave Coaxial Connectors If the list of contents does not appear on the left hand side of your monitor please go to: WINDOW SHOW BOOKMARKS RF/Microwave Coaxial Connectors 40A SPRINGWOOD DRIV, BRAINTR, SSX CM7 2YN, NGLAND TL: +44(0)

More information

1/4" and 3.5 mm Phone Plugs

1/4 and 3.5 mm Phone Plugs N Y S P r o d u c t G u i d e P l u g s 1/4" and 3.5 mm Phone Plugs NYS 204 NYS 208 NYS 224G NYS 225B Commercial 1/4" plugs and adapters All connectors acc. EIA RS-453 / IEC 60603-11 Short and long turned

More information

Control CONNECTOR. (AI500 Rev H 14Nov17) Hawke International UK Office, Oxford Street West, Ashton-under-Lyne, Lancashire. OL7 0NA.

Control CONNECTOR. (AI500 Rev H 14Nov17) Hawke International UK Office, Oxford Street West, Ashton-under-Lyne, Lancashire. OL7 0NA. Control CONNECTOR (AI500 Rev H 14Nov17) Hawke International UK Office, Oxford Street West, Ashton-under-Lyne, Lancashire. OL7 0NA. UK Sales: +44 (0) 161 830 6698 Technical: +44 (0) 161 830 6697 Fax: +44

More information

RF Connectors Technical Data Sheet. Description Minimum Typical Maximum Units. Frequency Range DC 3 GHz VSWR 1.25:1 Operating Voltage (AC) 335 Vrms.

RF Connectors Technical Data Sheet. Description Minimum Typical Maximum Units. Frequency Range DC 3 GHz VSWR 1.25:1 Operating Voltage (AC) 335 Vrms. BNC Male Connector Crimp/Crimp Attachment for 100 inch, RG316, RG174, RG188, LMR-100, LMR- 100, LMR-100-FR, PE-C100, PE-B100 RF Connectors Technical Data Sheet PE45045 Configuration BNC Male Connector

More information

FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V)

FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) FIXTURE INSTALLATION GUIDE Model T21T (Low Voltage Pendant Set 120V) 21T, Rev.4 6-13 IMPORTANT: Before proceeding, retrieve the GLASS SHADE INSTALLATION GUIDE, which is included with the pendant cord set

More information

Product Manual MNX10050 / REV B MODELS:

Product Manual MNX10050 / REV B MODELS: VIBRATION ANALYSIS HARDWARE Product Manual MNX10050 / REV B MODELS: CC-AXX & JXX CC-C2X & C3X Field Installable Connector Kits Contents Section I Overview Introduction... 2 Description... 2 Section II

More information

TNC Connectors. General Description. TNC Configurations. TNC Specifications* Plug Interface** Jack Interface**

TNC Connectors. General Description. TNC Configurations. TNC Specifications* Plug Interface** Jack Interface** TN onnectors General Description Delta TN connectors are compact, 50 Ω impedance connectors with 7 16-28 threaded coupling, similar in size to N connectors but with better electrical characteristics. They

More information

Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms

Electrical dielectric withstanding voltage. sea level Vrms Vrms m Vrms Vrms Applications Mechanical and electrical interface between on-board civil avionics equipments and racks Standards Arinc 600 Characteristics Mechanical material finish aluminum alodine 00 shells alloy to

More information

JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2.

JULY 2014 SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. M80 & M83 SERIES RECTANGULAR CONNECTORS JULY 204 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations

More information

N Male Connector Clamp/Solder Attachment for PE-C500, LMR-500

N Male Connector Clamp/Solder Attachment for PE-C500, LMR-500 N Male Connector Clamp/Solder Attachment for PE-C500, LMR-500 RF Connectors Technical Data Sheet PE44046 Configuration N Male Connector MIL-STD-348A 50 Ohms Features Gold Plated Brass Contact Applications

More information

Quick Reference Guide RF Coaxial Connectors

Quick Reference Guide RF Coaxial Connectors Quick Reference Guide Coaxial RF Products: Quick View Product Operating Frequency (Max.) Impedance VSWR Durability (Mating Cycles) Operating Temp. Coupling Style Standard 7/16 7 GHz 50 Ω 1.02 + 0.03f up

More information

SERIES SMB SUBMINIATURE CONNECTORS

SERIES SMB SUBMINIATURE CONNECTORS SERIES SMB SUBMINIATURE CONNECTORS DESCRIPTION CONTENTS PAGE The HUBER+SUHNER subminiature connectors Series SMB, SMC, SMS have the same basic design. They only differ with regard to their coupling mechanism.

More information

SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch

SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight

More information

MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz

MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper

More information

Spiderbeam Balun Construction Guide

Spiderbeam Balun Construction Guide BALUN CONSTRUCTION GUIDE Ver. 1.0 1 The components of the Balun Kit are in a plastic bag. Most of the components are inside the plastic case of the balun. The aluminum U-profile and the RG-142 Teflon Coax

More information

Times Microwave Systems Hermetically Sealed Assemblies

Times Microwave Systems Hermetically Sealed Assemblies SCOPE This Specification details the Electrical, Mechanical and Environmental Characteristics of Times Microwave Systems MILTECH 480.48 Diameter Hermetically Sealed Coaxial Transmission Lines. This product

More information

Pacific Antenna RF Probe assembly

Pacific Antenna RF Probe assembly Pacific Antenna RF Probe assembly Parts In the Kit: 1 1/2 x 3 Blue PEX tube 2 5/8 O.D. vinyl caps 2 3/32 dia x 2 brass tube sections 2 Pogo spring contacts 1 4-40 x 7/16 pan head screw 1 4-40 x 1/4 pan

More information

PAC-12 Kit Contents. Tools Needed Soldering iron Phillips screwdriver Wire stripper Wrenches, 7/16 and 1/2 Terminal crimp tool Pliers Solder

PAC-12 Kit Contents. Tools Needed Soldering iron Phillips screwdriver Wire stripper Wrenches, 7/16 and 1/2 Terminal crimp tool Pliers Solder PAC-2 Kit Contents Part Quantity Screws: 8/32 x 3/8 Screws: 8-32 x 5/6 Screw: 8-32 x /4 #8 internal tooth washers #8 solder lug ring terminals Bolt: Aluminum, /4-20 x.5 /4 internal tooth washer Nut: Aluminum

More information

Assembly Instructions for the 1.5 Watt Amplifier Kit

Assembly Instructions for the 1.5 Watt Amplifier Kit Assembly Instructions for the 1.5 Watt Amplifier Kit 1.) All of the small parts are attached to a sheet of paper indicating both their value and id. 2.) Leave the parts affixed to the paper until you are

More information

N SERIES Coaxial Connectors

N SERIES Coaxial Connectors Coaxial Connectors Description The Jy Chyun coaxial N connectors are largely products designed to support the applications of the receptor antennas, station equipment, communication systems, and for test

More information

FBT-195 TIMES MICROWAVE SYSTEMS

FBT-195 TIMES MICROWAVE SYSTEMS FBT-195 Engineered Products: FBT TM -195 Flexible Low Loss High Power Communications Coax Ideal for High Power Base Station Jumper Assemblies In-Building Plenum Feeder Runs Any High Power Low Loss RF cable

More information

WiFi Interface Identifier

WiFi Interface Identifier WiFi Interface Identifier WiFi Interface Identifier Today s wireless market has exposed us to many new, and some familiar connectors. The wide range of antennas, access points, routers, WLAN s, cellular

More information

C240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR

C240-NFSM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR C240-NFSM-3M Product Classification Brand Product Series Product Type CNT Jumper with interface types N Female and SMA Male, 3m CNT Braided cable assembly General Specifications Body Style, Connector A

More information

Series 791 Connectors

Series 791 Connectors Pin and Socket s for Series 79 Connectors Crimp s Size 23 Crimp s Operating temperature: -65 to +150 C Current rating: 5A Crimp Tensile Strength Wire Size Axial Load (lbs.) 22 12 24 8 26 5 28 3 30 1.5

More information

7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195

7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 RF Connectors Technical Data Sheet PE4567 Configuration 7/16 DIN Male Connector

More information

SMA Self-Fixture End Launch Connectors

SMA Self-Fixture End Launch Connectors SMA Self-Fixture End Launch Connectors An ideal solution for design engineers who are obligated to cut manufacturing costs and complexity out of their circuit board system. For those microwave engineers

More information

SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3

SECTION TITLE PAGE. 1 Description of Connectors and Intended Applications 2. 2 Marking of Connector and/or Package 2. 3 Ratings 3 C0053 M80 & M83 SERIES RECTANGULAR CONNECTORS FEBRUARY 8 SECTION TITLE PAGE Description of Connectors and Intended Applications 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix Contact Orientations

More information

SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55

SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 RF Connectors Technical Data Sheet Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG142, RG223, RG400, RG55

More information

ATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications.

ATBTK-MF-4G. Product Classification. Mechanical Specifications. Dimensions. Regulatory Compliance/Certifications. ATBTK-MF-4G Bias Tee Kit, AISG Compatible 698-2700 MHz Product Classification Product Type RET bias tee Mechanical Specifications Antenna Interface 7-16 DIN Female BTS Interface 7-16 DIN Male Dimensions

More information

Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz

Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement

More information

MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan

MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw

More information

Sunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height

Sunridge MCB Series Miniature Coaxial Interconnect, 2.5mm or 2.0mm Mated Height Sunridge MCB series coaxial product fulfills the rigorous requirements of high frequency data transmission in digital world. Constructed in supreme Teflon coax cable and advanced mechanical design, MCB

More information

C400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications

C400-TMTM-30-X. Jumper Assembly Sample Label. Product Classification. General Specifications. Electrical Specifications C400-TMTM-30-X Product Classification Brand Product Series Product Type CNT-400-FR CNT Jumper with interface types TNC Male and TNC Male, 9.14 m CNT CNT-400 Braided cable assembly General Specifications

More information

Pacific Antenna 20 and 40M Lightweight Dipole Kit

Pacific Antenna 20 and 40M Lightweight Dipole Kit Pacific Antenna 20 and 40M Lightweight Dipole Kit Antenna diagram showing configuration and lengths when assembled 7 8 16 9 16 9 Description The Pacific Antenna lightweight dual band dipole kit provides

More information

C400-NMTM-1M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR

C400-NMTM-1M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR C400-NMTM-1M Product Classification Brand Product Series Product Type CNT-400 CNT Jumper with interface types N Male and TNC Male, 1m CNT CNT-400 Braided cable assembly General Specifications Body Style,

More information

Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique

More information

Foxhunt Offset Attenuator. Parts List:

Foxhunt Offset Attenuator. Parts List: When your closing in on the fox you may find the signals to be so strong that you can no longer find a peak or null with your antenna. Sometimes the signal is so strong that the RF will leak straight into

More information

It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating loose.

It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating loose. Installation instructions for FC12 Forward Controls for Kawasaki Vulcan 750 It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating

More information

Miniature Waterproof Shielded Connectors

Miniature Waterproof Shielded Connectors Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components

More information

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics

Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying

More information

ELECRAFT Application Note

ELECRAFT Application Note ELECRAFT Application Note Front Panel Microphone Circuit Modification Revision A, November 12, 2008 Copyright 2008, Elecraft, Inc., All Rights Reserved Background Some K3 owners have noted distorted transmit

More information

C195-SMQM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR

C195-SMQM-3M. Jumper Assembly Sample Label. Product Classification. General Specifications. Return Loss/VSWR C195-SMQM-3M Product Classification Brand Product Series Product Type CNT-195 CNT Jumper with interface types SMA Male and QMA Male, 3M CNT CNT-195 Braided cable assembly General Specifications Body Style,

More information

How To Install Weather Pack Bulkhead Wire Connectors

How To Install Weather Pack Bulkhead Wire Connectors How To Install Weather Pack Bulkhead Wire Connectors Weather Pack wire connectors are the premium line of environmentally sealed connectors from Delphi/Packard. The bulkhead series creates a secure and

More information

BNC Connectors. General Description. BNC Configurations. BNC Specifications* Plug Interface** Jack Interface**

BNC Connectors. General Description. BNC Configurations. BNC Specifications* Plug Interface** Jack Interface** N onnectors General Description Delta N connectors are compact, economical, 50Ω impedance connectors with two-stud bayonet coupling. They are best suited for use with cables in the range of.150" to.50"

More information

N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC. Cable Attachment Method (Shield/Contact)

N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC. Cable Attachment Method (Shield/Contact) N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC TECHNICAL DATA SHEET N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2

More information

Appendix A: BLC-10/20/25 DC Models Packing

Appendix A: BLC-10/20/25 DC Models Packing Appendix A: BLC-10/20/25 DC Models Packing List BLC-10/20/25/40/50 User Manual Appendix A: BLC-10/20/25 DC Models Packing List Description Belcom P/N Quantity BLC-10/20/25 BLC 10/20/25 1 Installation Kit,

More information

USB 2.0-IP67 Water Resistant Connector System

USB 2.0-IP67 Water Resistant Connector System Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can

More information

Miniature Waterproof Shielded Connectors

Miniature Waterproof Shielded Connectors Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded

More information

AMPLIMITE Cable Connectors and Shielding Hardware Kits

AMPLIMITE Cable Connectors and Shielding Hardware Kits AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering

More information

SYSTIMAX 12A1 Cable Clamp Kit Instructions For Crossply-, R/L-, and LXE-Type Cable

SYSTIMAX 12A1 Cable Clamp Kit Instructions For Crossply-, R/L-, and LXE-Type Cable Instruction Sheet 860063510 Issue 4, June 2013 SYSTIMAX Solutions SYSTIMAX 12A1 Cable Clamp Kit Instructions For Crossply-, R/L-, and LXE-Type Cable General The SYSTIMAX 12A1 cable clamp kit is used to

More information