SAFEIR Series 10ETS12PbF

Transcription

1 Bulletin I9 /04 SAFEIR Series 0ETSPbF INPUT RECTIFIER DIODE Lead-Free ("PbF" suffix) V F < 0A I FSM = 00A Description/ Features V RRM = 00V The 0ETSPbF rectifier SAFEIR series has been optimized for very low forward voltage drop, with moderate leakage. The glass passivation technology used has reliable operation up to 50 C junction temperature. Typical applications are in input rectification and these products are designed to be used with International Rectifier Switches and Output Rectifiers which are available in identical package outlines. Output Current in Typical Applications Applications Single-phase Bridge Three-phase Bridge Units Capacitive input filter T = 55 C, T A J = 5 C common heatsink of C/ W.0.0 A Major Ratings and Characteristics Package Outline Characteristics Values Units I F(AV) Sinusoidal waveform 0 A V RRM 00 V I FSM 00 A V 0 A, T = 5 C. V J - 40 to 50 C TO-0AC

2 0ETSPbF SAFEIR Series Bulletin I9 /04 Voltage Ratings Part Number V RRM, maximum V RSM, maximum non repetitive I RRM peak reverse voltage peak reverse voltage 50 C V V ma 0ETSPbF Absolute Maximum Ratings Parameters Values Units Conditions I F(AV) Max. Average Forward Current 0 T C = 05 C, 80 conduction half sine wave I FSM Max. Peak One Cycle Non-Repetitive 70 A 0ms Sine pulse, rated V applied RRM Surge Current 00 0ms Sine pulse, no voltage reapplied I t Max. I t for fusing 30 A s 0ms Sine pulse, rated V RRM applied 45 0ms Sine pulse, no voltage reapplied I t Max. I t for fusing 450 A s t = 0. to 0ms, no voltage reapplied Electrical Specifications Parameters Values Units Conditions V FM Max. Forward Voltage Drop. 0A, = 5 C r t Forward slope resistance 0 mω V F(TO) Threshold voltage 0.8 V = 50 C I RM Max. Reverse Leakage Current 0.05 ma = 5 C 0.50 = 50 C V R = rated V RRM Thermal-Mechanical Specifications Parameters Values Units Conditions Max. Junction Temperature Range - 40 to 50 C T stg Max. Storage Temperature Range - 40 to 50 C R thjc Max. Thermal Resistance Junction.5 C/W DC operation to Case R thja Max. Thermal Resistance Junction C/W to Ambient (PCB Mount)* T s Soldering Temperature 40 C wt Approximate Weight (0.07) g (oz.) Case Style TO-0AC Device Marking 0ETS * When mounted on " square (50mm ) PCB of FR-4 or G-0 material 4 oz (40µm) copper 40 C/W For recommended footprint and soldering techniques refer to application note #AN-994

3 0ETSPbF SAFEIR Series Bulletin I9 /04 Maximum Allowable Case Temperature ( C) 50 R 40 thjc(dc) =.5 C/ W 30 Conduction Angle Maximum Allowable Case Temperature ( C) 50 R thjc (DC) =.5 C/ W Conduction Period DC Fig. - Current Rating Characteristics Fig. - Current Rating Characteristics Maximum Average Forward Power Loss (W) RMS Limit Conduction Angle T J = 50 C Maximum Average Forward Power Loss (W) DC 80 0 RMS Limit Conduction Period T = 50 C J Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics Peak Half Sine Wave Forward Current (A) At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial = 50 0 Hz Hz 0.0 s 40 0 Number Of Equal Amplitude Half Cycle Current Pulses (N) Peak Half Sine Wave Forward Current (A) Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial = 50 C No Voltage Reapplied Rated V RRM Reapplied Pulse Train Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current Fig. - Maximum Non-Repetitive Surge Current 3

4 0ETSPbF SAFEIR Series Bulletin I9 /04 Instantaneous Forward Current (A) 0 T = 5 C J T = 50 C J Instantaneous Forward Voltage (V) Fig. 8 - Forward Voltage Drop Characteristics Transient Thermal Impedance Z thjc ( C/ W) 0 D = 0.50 D = 0.33 D = 0.5 D = 0.7 D = 0.08 Single Pulse Steady State Value (DC Operation) Square Wave Pulse Duration (s) Fig. 9 - Thermal Impedance Z thjc Characteristics 4

5 0ETSPbF SAFEIR Series Bulletin I9 /04 Outline Table 5.4 (0.0) 4.84 (0.58) 0.54 (0.4) MAX (0.5) DIA (0.4).9 (0.).54 (0.0) TERM 3.48 (0.5).3 (0.4).3 (0.05). (0.05) Base Cathode 4.09 (0.55) 3.47 (0.53) 3.9 (0.) 3.55 (0.4) 0.0 (0.004).40 (0.05).5 (0.04).04 (0.080) MAX (0.04).89 (0.).4 (0.0) 3 Cathode Anode 0.9 (0.03) 4.57 (0.8) 3 0. (0.0) MAX. 4.3 (0.7) 5.08 (0.0) REF. TO-0AC Dimensions in millimeters (inches) Part Marking Information IRMX Assembly Line EXAMPLE: THIS IS A 0ETS LOT CODE 789 ASSEMBLED ON WW 9, 00 IN THE ASSEMBLY LINE "C" INTERNATIONAL RECTIFIER LOGO ASSEMBLY LOT CODE PART NUMBER DATE CODE YEAR = 00 WEEK 9 P = LEAD-FREE 5

6 0ETSPbF SAFEIR Series Bulletin I9 /04 Ordering Information Table Device Code 0 E T S PbF Current Rating (0 = 0A) - Circuit Configuration E = Single Diode 3 - Package T = TO-0AC 4 - Type of Silicon S = Standard Recovery Rectifier 5 - Voltage Rating ( = 00V) - none = Standard Production PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 33 Kansas St., El Segundo, California 9045, USA Tel: (30) TAC Fax: (30) Visit us at for sales contact information. 0/05