TELECOM TECHNICIAN (LINE & MOBILE) (3 Month Course)

Size: px
Start display at page:

Download "TELECOM TECHNICIAN (LINE & MOBILE) (3 Month Course)"

Transcription

1 GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR TELECOM TECHNICIAN (LINE & MOBILE) (3 Month Course) CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II, LAHORE Ph # , gm.acad@tevta.gop.pk, manager.cur@tevta.gop.pk

2 TRAINING OBJECTIVE. This is an age of communication and the older methods as communication are becoming obsolete and newer & modern ones are continuously replacing them. One of such a modern of communiqué is mobile communication. It has now become a necessity & has been enthusiastically adopted by the people throughout the world. The modern mass cannot think of life without this facility to connect with his family and friends at any place at any time. As a sequel of time a necessity, it is absorbing more people into it than any other field of life these days, keeping in view this fact, it is felt imperative to introduce some courses about communication. Repairing of mobiles and maintaining telecom equipment are such courses being introduced to produce semi skilled manpower to carry out repairs of the mobiles and household telecom equipment to meet the job market. CURRICULUM SALIENTS. Entry-level : Matric Duration of course : 03- Months Total Training Hours : 400 Hours : 40 Hours per Week 6 Days per week 7 Hours per day (Friday 5 hrs.) Training Methodology : Practical. 85% : Theory 5% Medium of Instruction : Urdu / English

3 2 SKILL PROFICIENCY DETAILS: On successful completion of this course, the trainee should be able to:-. Work according to general workshop rules & regulations. 2. Use the measuring instruments safely. 3. Operate the instruments like microscope, hot air gun & soldering station etc. 4. Read the block diagram of mobile sets. 5. Troubleshoot the different mobile sets. 6. Handle power supply, UPS, Stabilizer etc. 7. Lay, Test, Joint of cable system 8. Install / repair of telephone sets. 9. Use the relevant test equipments. 0. Install and troubleshoot PABX.

4 3 KNOWLEDGE PROFICIENCY DETAILS: On successful completion of this course, the trainee should be able to:-. Explain the safety precautions & safety practices. 2. Explain the communication system. 3. Describe the basic information about computer applications 4. Describe the wireless standards. 5. Define the information about multiple access & GSM. 6. Define the troubleshooting of mobile and telecom, hardware & software. 7. Explain the function & parts of telephone sets, PABX and line.

5 4 SCHEME OF STUDIES Telecom Technician (Line & Mobile) (3 Month Course) Sr. No. Subjects Theory Hrs. Practical Hrs. Total Hrs.. Electronics Cable PABX Communication System Computer Software Application Fundamentals of Mobile Telephony Basic Network Overview Repair Methodology Testing Method with Instruments Trouble Shooting Functional English Work Ethics Total

6 5 DETAIL OF COURSE CONTENTS Telecom Technician (Line & Mobile) (3 - Month Course) Sr. Detail of Topics No. Electronics.. Introduction... Introduction & Application of electricity & electronics..2. Safety rules & quantity of electrical and electronics..3. Symbols for Electronics Components.2. Measuring Instruments.2.. Introduction Safety for measuring tools and equipments.2.2. Function Generators, Pattern generator, Signal Generator AF/RF.2.3. Multi-meter.(Analogue) & Multimeter.(Digital).2.4. Oscilloscope.3. Atom Conductor & Insulator.3.. Atomic structure Charge of proton, neutron, electrons Similar, dissimilar charges & Flow of electrons (current).3.2. Generation of EMF (voltage) Definition of Conductivity, Definition of Conductor & Insulator Types of conductor & insulator.4. Resistance.4.. Definition of resistance, Resistance dependent material and unit.4.2. Color coding and de-coding of resistance Theory Hours Practical Hours

7 6 (basic & advance) & Types of resistance.5. OHMS LAW.5.. Ohms law (relation between I & V when R is constant).5.2. Ohms law relation between I & V when R is variable).5.3. Electrical Power.6. Series and Parallel Circuits.6.. Resisters in series and Parallel circuit.6.2. Current in series and Parallel circuit.7. Capacitors.7.. The capacitors & Types of capacitors.7.2. Capacitors in D.C.& AC circuits.8. Inductors.8.. The inductors,types of inductors & Inductors in Series & Parallel.8.2. Inductors in AC & DC circuits.9. Batteries.9.. The voltaic & Carbon-zinc dry cell.9.2. Alkaline Cell, lithium Cell, Lead-acid wet Cell.9.3. Additional types of primary & secondary cells.0. Electricity & Magnetism.0.. The magnetic field.0.2. Electromagnetism & Electromagnetic induction.. Transformers... The basic principal of transformers..2. Types of transformers.2. Semiconductor Devises ½ ½ ½ ½ ½ ½

8 7.2.. Conduction in semiconductor material.2.2. N type & P type semiconductors PN junction.2.3. Biasing the diode, Diode characteristics.3. Diodes & Their Applications.3.. Half-wave rectifier, Full-Wave rectifier & Rectifier filters.3.2. Zener diode, L.E.D & Varactor Diode.4. Bipolar Transistor.4.. Basic principle & Transistor biasing.4.2. Current, voltage Gain.4.3. Transistor as Amplifier & as Switch.5. Field Effect Transistors.5.. Construction of JFET.5.2. N channel, p channel & Types of FET.5.3. MOS FET.6. Integrated circuits.6.. Construction of I.C.6.2. Types of ICs.6.3. Level of Integration.7. Operational Amplifier.7.. The differential Amplifier.7.2. Operational amp as Inverting & Non- Inverting Amplifier.7.3. Applications of op Amplifier.8. Electronic Timer.8.. Construction of timer Applications.9. Regulated power supply.9.. Transistorized regulated power supply(fixed) & (adjust able) ½ ½

9 Integrated Regulators.20. Digital Electronics.20.. Introduction Basic functions of logic operation AND, OR, & NOT operation NAND, NOR & Exclusive OR Operation 2 Cable 2.. Introduction & Tyes of Cables 2.2. Selection of proper cable 2.3. Cable Connectors and their tyes 3 PABX 3.. Introduction of Exchanges (PABX) 3.2. Block diagram of Exchanges (PABX) 3.3. Trunk and local number & loop side 4 Communication System 4.. Radio Transmitter 4... Block Diagram of radio transmitter (AM/FM) Signal Transmission 4.2. Radio Receiver Block diagram of S.H. Radio Receiver(AM) Principle of Heterodyning Action 4.3. Modulation Introduction Fundamental of AM Modulator Fundamental of FM Modulation 4.4. Sampling and Pulse code Modulation Sampling Pulse code Modulation (PCM) ½ 3 ½ 3 5 7

10 Differential Pulse code Modulation (DPCM) Delta Modulation 4.5. Introduction to Wireless Communication System Abbreviations of Communication Systems Mobil Radio system Around the world Examples of wireless Communication System Paging Cordless Telephone system Cellular Telephone System Comparison of Common Wireless Communication Systems 5 Computer Software Applications 5.. Introduction to Computers 5... What is Computer Hardware & Software Computer Storage Devices In put Devices Output Devices 5.2. Microsoft Windows Introduction to Windows 98/2000 & XP Getting Started with new desktop Working with windows application / Programs Files, Folders, Short Cuts (Windows Explorer) Using Windows Applications, Using scandisk & Recycle bin View Hardware Information /Printer

11 0 Setup 5.3. Microsoft Word Introduction to Word 2000 / XP The Menu Bar and commands Use of Ruler, Entering Text, Undo & Redo and Saving documents Opening files in word 2000 / XP and Coping documents in Word 2000 / XP Word s window Menu, Correcting Mistakes & Formatting Text, Page Setup Printing Tool and Background Printing Inserting Page Breaks, Insert a picture from the clip Gallery, Inserting another word document into an open document Overview of tables 5.4. Internet & Electronic Mail Introduction to WWW Internet Service Provider Internet Explorer. Netscape A Specific Web Select a Link Search a Web Introduction to , Create a message Send and Receive 6 Fundamentals of Mobile Telephony 6.. Introduction to Wireless Communication System 6... Abbreviations of Communication Systems Mobil Radio system Around the world Examples of wireless Communication System

12 6..4. Paging Cordless Telephone system Cellular Telephone System Comparison of Common Wireless Communication Systems 6.2. Wireless System and Standards Duple Xing Techniques Introduction to Duple Xing Technique Frequency Division Duple Xing (FDD) Time Division Duple Xing (TDD) 6.3. Multiple Access Introduction to Multiple Access Frequency Division Multiple Access (FDMA) Time Division Multiple Access (TDMA) Code Division Multiple Access (CDMA) Advance Mobile Phones Service(AMPS) and European Total Access Communication System (ETACS) Overview 6.4. Global System for Mobile (GSM) GSM History, GSM Specifications & GSM Band Spectrum GSM Benefits Growth in Wireless Data Mobile Data Technology Evolution GPRS (General Packet Radio Servics) 7 Basic Network Overview 7.. Traffic/signaling, Network overview 7.2. SIM-Card, mobile Equipment & SIM-Card Function

13 Mobile Identification and Trends in mobile Station 7.4. Tele services, Supplementary Services & Intelligent Net work Services 7.5. Cellular Principles,GSM Radio Subsystem & GSM Channel Types 7.6. Functions and Protocols 8 Repair Methodology 8.. Instruction to repair system for mobile phones hand set 8.2. Fault diagnoses procedure 8.3. Block diagram of mobile phones Nokia series 8.4. Block diagram of mobile phones Sony Erricson series 8.5. Block diagram of mobile phones Samsung series 9 Testing Method with Instruments 9.. How to operate the Microscope 9.2. How to operate the Hot air gun, Soldering station and Rework station 9.3. How to operate the Soldering Lead,Soldering Paste & De-Soldering wire 9.4. Demonstration to Replace SMD, Exchange SMD Components 9.5. Repairing steps & Repairing tips 0. Trouble shooting 0.. Introduction 0... How to unzip & zip Telephone Receiver How to unzip & zip Wire less Receiver Telephone and base station

14 How to unzip & zip Mobile Phone Receiver How to Replace the Microphone How to Replace the Antenna, Speaker and Vibrator How to Replace the Changing Pin, battery terminal, Filter cap & Charging IC How to Replace the display & Transmitter 0.2. Troubleshooting of Software Problems Introduction of Software problem of a Handset Introduction of requirements (Basic Knowledge) How to identify the software problem of different models of handsets What is the cause of this problem What is the effect of this problem Cleaning Brush(Skills and Techniques) Demonstration,Repairing Steps & Repairing Tips How to use the appropriate equipment and software for troubleshooting 0.3. Repairing IMEI, Unlock SP Lock and Upgradation of Software Version of handset Introduction of the requirements(basic Knowledge) What is IMEI What is Phone Lock What is SIM Lock

15 What is the requirements to do handset upgrade Tools and equipment Introduction of the related equipment and software to do the job Skills and techniques Demonstration,Repairing Steps & Repairing Tips. Functional English Work Ethics 2 TOTAL 7 329

16 5 LIST OF TOOLS / EQUIPMENT / LAB. OR WORKSHOP (For The Class Of 25 Students) Name of Course Duration of Course Telecom Technician 3 Month Course Sr. No. Nomenclature of Equipment / Tools Quantity. Multi-meters Five 2. Cables (Multi wires / Extension wires) Assorted 3. PCxx486 OR Higher with Monitor, Key Board and Mouse Five Sets 4. Screw Drivers Twenty Five 5. Pliers Twenty Five 6. Cable Jointing Machine One 7. Telephone Set Twenty Five 8. PAB x (Different Models) Assorted 9. Soldering Guns Five 0. Suckers (For De-soldering) Five. Registers (Different Values) Five 2. Floppy Diskettes One Dozen 3. UPS Five 4. Power Supplies (Different Models) Five 5. Batteries (Nicd) Five 6. Oscilloscopes Five 7. Terminal Boxes Five 8. Surface mount device rework station 5 Nos. 9. micro scope 2 Nos. 20. Product specific jigs for different brands. 2 Nos. 2. GSM test set 2 Nos. 22. Universal antenna coupler with complete base station 2 Nos. 23. Power supply digital 0 Nos. 24. Storage box 200 Nos. 25. Flash Programmer 5 Nos.

17 6 26. Universal battery tester 0 Nos. 27. Grounding station (EST / SMD) 5 Nos. 28. Soldering Iron 25 Nos. 29. BGA rework station 25 Nos. 30. SMD rework station 0 Nos. 3. Tool kits (for mobile repacking) 25 Nos. 32. RF Signal generator 2000 MHZ 2 Nos. 33. Digital / Analog, Multimeter 0 Nos. 34. Digital Oscilloscope 2 Nos. 35. Authenticator / Nokia software downloader 25 Nos. 36. Wood bench 25 Nos. 37. Est chairs 2 Nos. 38. Service station 2 Nos. 39. Hot air gun 2 Nos.

18 7 REFERENCE BOOKS Wireless Communication Principles & Practice by Ordor Rappaport Fundamentals of Electronics by Floyd (3 rd Edition) Manuals of Telecom Technician Electronics Devices & Circuits by Bogart Jr. (2 nd Edition)

19 8 MINIMUM QUALIFICATION OF INSTRUCTOR B.Sc. Engineering with 2 Years relevant experience OR DAE in relevant field with 4 Years relevant experience OR 2 Years Proficiency certificate with 6 Years relevant experience

20 9 EMPLOYABILITY OF THE PASS OUTS The pass outs this course this course can find job / employment in the following areas / sectors: - PTCL Mobile Companies e.g. Nokia, Sony Ericsson, Samsung, Motorola, Siemens & Panasonic etc. ISP (Internet Service Provider) Mobile Phone Repair workshops.

Careers in Electronics Using a Calculator Safety Precautions Dc Circuits p. 1 Fundamentals of Electricity p. 3 Matter, Elements, and Compounds p.

Careers in Electronics Using a Calculator Safety Precautions Dc Circuits p. 1 Fundamentals of Electricity p. 3 Matter, Elements, and Compounds p. Preface p. vii Careers in Electronics p. xii Using a Calculator p. xvi Safety Precautions p. xix Dc Circuits p. 1 Fundamentals of Electricity p. 3 Matter, Elements, and Compounds p. 4 A Closer Look at

More information

MACHINIST (3 Month Course) Revised May, 2009

MACHINIST (3 Month Course) Revised May, 2009 GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR CURRICULUM FOR MACHINIST (3 Month Course) Revised May, 2009 CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II,

More information

Curriculum. Technology Education ELECTRONICS

Curriculum. Technology Education ELECTRONICS Curriculum Technology Education ELECTRONICS Supports Academic Learning Expectation # 3 Students and graduates of Ledyard High School will employ problem-solving skills effectively Approved by Instructional

More information

GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR. AUTO CAD (Civil) (3 Months Course)

GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR. AUTO CAD (Civil) (3 Months Course) GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR AUTO CAD (Civil) CURRICULUM FOR (3 Months Course) CURRICULUM SECTION ACADEMICS DEPARTMENT 96-H, GULBERG-II, LAHORE

More information

WAEC Syllabus - Uploaded online by RADIO, TELEVISION AND ELECTRONICS WORKS

WAEC Syllabus - Uploaded online by  RADIO, TELEVISION AND ELECTRONICS WORKS RADIO, TELEVISION AND ELECTRONICS WORKS 1. PREAMBLE This examination syllabus evolved from the Senior Secondary School curriculum for Trade Subjects. It is intended to give candidates insight into the

More information

Syllabus for the Trade of Electronic Mechanic Duration : 6 Months

Syllabus for the Trade of Electronic Mechanic Duration : 6 Months Fourth Semester Semester Code: ELM: SEM IV Syllabus for the Trade of Electronic Mechanic Duration : 6 Months OBJECTIVES: Work with DPM Modules to measure various electrical parameter Practice various modulation

More information

BASIC ELECTRICITY/ APPLIED ELECTRICITY

BASIC ELECTRICITY/ APPLIED ELECTRICITY BASIC ELECTRICITY/ APPLIED ELECTRICITY PREAMBLE This examination syllabus has been evolved from the Senior Secondary School Electricity curriculum. It is designed to test candidates knowledge and understanding

More information

BASIC ELECTRICITY/ APPLIED ELECTRICITY

BASIC ELECTRICITY/ APPLIED ELECTRICITY BASIC ELECTRICITY/ APPLIED ELECTRICITY PREAMBLE This examination syllabus has been evolved from the Senior Secondary School Electricity curriculum. It is designed to test candidates knowledge and understanding

More information

Industrial Electronics

Industrial Electronics Job Ready Assessment Blueprint Industrial Electronics Test Code: 2051 / Version: 01 Measuring What Matters Specific Competencies and Skills Tested in this Assessment: DC Electricity Demonstrate the ability

More information

Repair and Maintenance of Radio ( AM & FM) and T.V. Receiver

Repair and Maintenance of Radio ( AM & FM) and T.V. Receiver Repair and Maintenance of Radio ( AM & FM) and T.V. Receiver Period of Training : 6 Months, 24 Weeks ( Effective Weeks 20 ) Entry Qualification : 10 th pass with age at least 14 yrs. Terminal Competency

More information

Preface... xv Acknowledgments... xix. Chapter 1 An Overview of Vacuum Tube Audio Applications... 1

Preface... xv Acknowledgments... xix. Chapter 1 An Overview of Vacuum Tube Audio Applications... 1 Contents Preface... xv Acknowledgments... xix Chapter 1 An Overview of Vacuum Tube Audio Applications... 1 The Evolution of Analog Audio... 1 Technology Waves... 3 Tube vs. Solid State.................................................

More information

INDUSTRIAL STITCHING MACHINE OPERATOR

INDUSTRIAL STITCHING MACHINE OPERATOR GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR INDUSTRIAL STITCHING MACHINE OPERATOR (6-MONTHS REGULAR COURSE) ACADEMIC DEPARTMENT CURRICULUM SECTION 96, GULBERG

More information

Technician Licensing Class T6

Technician Licensing Class T6 Technician Licensing Class T6 Amateur Radio Course Monroe EMS Building Monroe, Utah January 11/18, 2014 January 22, 2014 Testing Session Valid dates: July 1, 2010 June 30, 2014 Amateur Radio Technician

More information

Entry Level Assessment Blueprint Electronics Technology

Entry Level Assessment Blueprint Electronics Technology Blueprint Test Code: 4135 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Practices Demonstrate safe working procedures Explain the purpose of OSHA and how it promotes

More information

TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY

TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY GOVERNMENT OF THE PUNJAB TECHNICAL EDUCATION & VOCATIONAL TRAINING AUTHORITY CURRICULUM FOR FOR DOMESTIC TAILORING ( Months Course) CURRICULUM SECTION ACADEMICS DEPARTMENT 9-H, GULBERG-II, LAHORE Ph #

More information

BASIC ELECTRONICS/ ELECTRONICS

BASIC ELECTRONICS/ ELECTRONICS BASIC ELECTRONICS/ ELECTRONICS PREAMBLE The syllabus is intended to equip candidates with broad understanding of the technology of manufacturing, maintenance and repair of domestic and industrial equipment.

More information

T6A4. Electrical components; fixed and variable resistors, capacitors, and inductors; fuses, switches, batteries

T6A4. Electrical components; fixed and variable resistors, capacitors, and inductors; fuses, switches, batteries Amateur Radio Technician Class Element Course Presentation ti ELEMENT SUB-ELEMENTS Technician Licensing Class Supplement T Electrical/Electronic Components Exam Questions, Groups T - FCC Rules, descriptions

More information

Contents. Acknowledgments. About the Author

Contents. Acknowledgments. About the Author Contents Figures Tables Preface xi vii xiii Acknowledgments About the Author xv xvii Chapter 1. Basic Mathematics 1 Addition 1 Subtraction 2 Multiplication 2 Division 3 Exponents 3 Equations 5 Subscripts

More information

WASSCE / WAEC BASIC ELECTRONICS / ELECTRONICS SYLLABUS

WASSCE / WAEC BASIC ELECTRONICS / ELECTRONICS SYLLABUS WASSCE / WAEC BASIC ELECTRONICS / ELECTRONICS SYLLABUS WWW.LARNEDU.COM Visit www.larnedu.com for WASSCE / WAEC syllabus on different subjects and more great stuff to help you ace the WASSCE in flying colours.

More information

SETH JAI PARKASH POLYTECHNIC, DAMLA

SETH JAI PARKASH POLYTECHNIC, DAMLA SETH JAI PARKASH POLYTECHNIC, DAMLA NAME OF FACULTY----------SANDEEP SHARMA DISCIPLINE---------------------- E.C.E (S.F) SEMESTER-------------------------2 ND SUBJECT----------------------------BASIC ELECTRONICS

More information

Lesson Plan. Week Theory Practical Lecture Day. Topic (including assignment / test) Day. Thevenin s theorem, Norton s theorem

Lesson Plan. Week Theory Practical Lecture Day. Topic (including assignment / test) Day. Thevenin s theorem, Norton s theorem Name of the faculty: GYANENDRA KUMAR YADAV Discipline: APPLIED SCIENCE(C.S.E,E.E.ECE) Year : 1st Subject: FEEE Lesson Plan Lesson Plan Duration: 31 weeks (from July, 2018 to April, 2019) Week Theory Practical

More information

Chapter 19 Study Questions Name: Class:

Chapter 19 Study Questions Name: Class: Chapter 19 Study Questions Name: Class: Multiple Choice Identify the letter of the choice that best completes the statement or answers the question. 1. All electronic devices transmit information using

More information

1. What is the unit of electromotive force? (a) volt (b) ampere (c) watt (d) ohm. 2. The resonant frequency of a tuned (LRC) circuit is given by

1. What is the unit of electromotive force? (a) volt (b) ampere (c) watt (d) ohm. 2. The resonant frequency of a tuned (LRC) circuit is given by Department of Examinations, Sri Lanka EXAMINATION FOR THE AMATEUR RADIO OPERATORS CERTIFICATE OF PROFICIENCY ISSUED BY THE DIRECTOR GENERAL OF TELECOMMUNICATIONS, SRI LANKA 2004 (NOVICE CLASS) Basic Electricity,

More information

FCC Technician License Course

FCC Technician License Course FCC Technician License Course 2014-2018 FCC Element 2 Technician Class Question Pool Presented by: Tamiami Amateur Radio Club (TARC) WELCOME To the SECOND of 4, 3-hour classes presented by TARC to prepare

More information

ELECTRONICS AND ELECTRICITY

ELECTRONICS AND ELECTRICITY INTRODUCTION ELECTRONICS ND ELECTRICITY The science of Electronics and Electricity makes a very important contribution to our everyday existence. Electricity is concerned with the generation, transmission

More information

Matrix Multimedia Limited Tel Fax

Matrix Multimedia Limited Tel Fax matrix multimedia Electronic Circuits and Components v2.0 Course material with Virtual Laboratories that stimulate, teach & test. This second version of Electronic Circuits and Components is bigger and

More information

Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary

Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Multiple Category Scope and Sequence: Scope and Sequence Report For Course Standards and Objectives, Content, Skills, Vocabulary Wednesday, August 20, 2014, 1:16PM Unit Course Standards and Objectives

More information

Wireless and Mobile Network Architecture. Outline. Introduction. Cont. Chapter 1: Introduction

Wireless and Mobile Network Architecture. Outline. Introduction. Cont. Chapter 1: Introduction Wireless and Mobile Network Architecture Chapter 1: Introduction Prof. Yuh-Shyan Chen Department of Computer Science and Information Engineering National Taipei University Sep. 2006 Outline Introduction

More information

Wireless and Mobile Network Architecture

Wireless and Mobile Network Architecture Wireless and Mobile Network Architecture Chapter 1: Introduction Prof. Yuh-Shyan Chen Department of Computer Science and Information Engineering National Taipei University Sep. 2006 1 Outline Introduction

More information

Number of Lessons:155 #14B (P) Electronics Technology with Digital and Microprocessor Laboratory Completion Time: 42 months

Number of Lessons:155 #14B (P) Electronics Technology with Digital and Microprocessor Laboratory Completion Time: 42 months PROGRESS RECORD Study your lessons in the order listed below. Number of Lessons:155 #14B (P) Electronics Technology with Digital and Microprocessor Laboratory Completion Time: 42 months 1 2330A Current

More information

070 ELECTRONICS WORKS EXAMINATION STRUCTURE

070 ELECTRONICS WORKS EXAMINATION STRUCTURE 070 ELECTRONICS WORKS EXAMINATION STRUCTURE The trade will be examined under the following components or subject grouping: Electronic Devices and Circuit, Radio Communication and Television. EXAMINATION

More information

Analog RF Electronics Education at SDSMT: A Hands-On Method for Teaching Electrical Engineers

Analog RF Electronics Education at SDSMT: A Hands-On Method for Teaching Electrical Engineers Analog RF Electronics Education at : A Hands-On Method for Teaching Electrical Engineers Dr., Professor Department of Electrical and Computer Engineering South Dakota School of Mines and Technology (whites@sdsmt.edu)

More information

PRACTICAL ELECTRONICS TROUBLESHOOTING

PRACTICAL ELECTRONICS TROUBLESHOOTING PRACTICAL ELECTRONICS TROUBLESHOOTING Second Edition James Perozzo 4 k 0 DELMAR PUBLISHERS INC. Contents Preface/xiii chapter one Some Necessary Basics Chapter Overview/1 Necessary Background/1 A Few Definitions/6

More information

10. RESOURCE REQUIREMENT

10. RESOURCE REQUIREMENT 149 10. RESOURCE REQUIREMENT 10.1 PHYSICAL RESOURCES (A) (B) Space requirement Norms and standards laid down by All India Council for Technical Education (AICTE) are to be followed to work out space requirement

More information

Downloaded from Downloaded from

Downloaded from  Downloaded from IV SEMESTER FINAL EXAMINATION-2002 The figure in the margin indicates full marks. [i] (110111) 2 = (?) 16 [ii] (788) 10 = (?) 8 Q. [1] [a] Explain the types of extrinsic semiconductors with the help of

More information

Electricity and Electronics Training System - Module 1 and 2

Electricity and Electronics Training System - Module 1 and 2 Electricity and Electronics Training System - Module 1 and 2 LabVolt Series Datasheet Festo Didactic en 03/2018 Table of Contents General Description 2 List of Manuals 2 Table of Contents of the Manual(s)

More information

SUBELEMENT T6 Electrical components: semiconductors; circuit diagrams; component functions 4 Exam Questions - 4 Groups

SUBELEMENT T6 Electrical components: semiconductors; circuit diagrams; component functions 4 Exam Questions - 4 Groups SUBELEMENT T6 Electrical components: semiconductors; circuit diagrams; component functions 4 Exam Questions - 4 Groups 1 T6A Electrical components: fixed and variable resistors; capacitors and inductors;

More information

ELECTRONICS ADVANCED SUPPLEMENTARY LEVEL

ELECTRONICS ADVANCED SUPPLEMENTARY LEVEL ELECTRONICS ADVANCED SUPPLEMENTARY LEVEL AIMS The general aims of the subject are : 1. to foster an interest in and an enjoyment of electronics as a practical and intellectual discipline; 2. to develop

More information

Electronics Interview Questions

Electronics Interview Questions Electronics Interview Questions 1. What is Electronic? The study and use of electrical devices that operate by controlling the flow of electrons or other electrically charged particles. 2. What is communication?

More information

Preface... iii. Chapter 1: Diodes and Circuits... 1

Preface... iii. Chapter 1: Diodes and Circuits... 1 Table of Contents Preface... iii Chapter 1: Diodes and Circuits... 1 1.1 Introduction... 1 1.2 Structure of an Atom... 2 1.3 Classification of Solid Materials on the Basis of Conductivity... 2 1.4 Atomic

More information

DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS

DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS 4 PEARSON CUSTOM ELECTRONICS TECHNOLOGY DC/AC CIRCUITS: CONVENTIONAL FLOW TEXTBOOKS AVAILABLE MARCH 2009 Boylestad Introductory Circuit Analysis, 11/e, 0-13-173044-4 Introduction 32 LC4501 Voltage and

More information

GCSE Electronics. Scheme of Work

GCSE Electronics. Scheme of Work GCSE Electronics Scheme of Work Week Topic Detail Notes 1 Practical skills assemble a circuit using a diagram recognize a component from its physical appearance (This is a confidence building/motivating

More information

Certified Electrician Training Program

Certified Electrician Training Program FINAL CERTIFICATION AWARDED BY IMRTC - USA Certified Electrician Training Program This highly specialized and concentrated Program is ideally suited to following individuals who: A people who would like

More information

ITT Technical Institute. ET215 Electronic Devices I Onsite Course SYLLABUS

ITT Technical Institute. ET215 Electronic Devices I Onsite Course SYLLABUS ITT Technical Institute ET215 Electronic Devices I Onsite Course SYLLABS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or Corequisite(s): Prerequisite:

More information

Associate In Applied Science In Electronics Engineering Technology Expiration Date:

Associate In Applied Science In Electronics Engineering Technology Expiration Date: PROGRESS RECORD Study your lessons in the order listed below. Associate In Applied Science In Electronics Engineering Technology Expiration Date: 1 2330A Current and Voltage 2 2330B Controlling Current

More information

Brief Course Description for Electrical Engineering Department study plan

Brief Course Description for Electrical Engineering Department study plan Brief Course Description for Electrical Engineering Department study plan 2011-2015 Fundamentals of engineering (610111) The course is a requirement for electrical engineering students. It introduces the

More information

Electronics. Module Descriptor

Electronics.   Module Descriptor The Further Education and Training Awards Council (FETAC) was set up as a statutory body on 11 June 2001 by the Minister for Education and Science. Under the Qualifications (Education & Training) Act,

More information

MOBILE COMPUTING 4/8/18. Basic Call. Public Switched Telephone Network - PSTN. CSE 40814/60814 Spring Transit. switch. Transit. Transit.

MOBILE COMPUTING 4/8/18. Basic Call. Public Switched Telephone Network - PSTN. CSE 40814/60814 Spring Transit. switch. Transit. Transit. MOBILE COMPUTING CSE 40814/60814 Spring 2018 Public Switched Telephone Network - PSTN Transit switch Transit switch Long distance network Transit switch Local switch Outgoing call Incoming call Local switch

More information

ET475 Electronic Circuit Design I [Onsite]

ET475 Electronic Circuit Design I [Onsite] ET475 Electronic Circuit Design I [Onsite] Course Description: This course covers the analysis and design of electronic circuits, and includes a laboratory that utilizes computer-aided software tools for

More information

Lesson 3: Electronics & Circuits

Lesson 3: Electronics & Circuits Lesson 3: Electronics & Circuits Preparation for Amateur Radio Technician Class Exam Topics Review Ohm s Law Energy & Power Circuits Inductors & Inductance Capacitors & Capacitance Analog vs Digital Exam

More information

Under. Apprenticeship Training Scheme

Under. Apprenticeship Training Scheme SYLLABUS For the trade of MECHANIC DTH & OTHER COMMUNICATION SYSTEM Under Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training

More information

CURRICULUM FOR ELECTROMECHANICAL TECHNICIAN [EMT]

CURRICULUM FOR ELECTROMECHANICAL TECHNICIAN [EMT] CURRICULUM FOR ELECTROMECHANICAL TECHNICIAN [EMT] 1989 (A Competency Based Short-term Curriculum) Council for Technical Education and Vocational Training CURRICULUM DEVELOPMENT DIVISION Sanothimi, Bhaktapur

More information

Subject-wise Tests Tests will be activated at 06:00 pm on scheduled day

Subject-wise Tests Tests will be activated at 06:00 pm on scheduled day Subject Name EC-01 Control Systems EC-02 Signals & Systems EC-03 Digital Electronics and Micro-Processors EC-04 Engineering Mathematics and Numerical Analysis EC-05 Network Theory EC-06 Basics of Energy

More information

Technician Licensing Class

Technician Licensing Class Technician Licensing Class Go Picture Presented These! by Amateur Radio Technician Class Element 2 Course Presentation ELEMENT 2 SUB-ELEMENTS (Groupings) About Ham Radio Call Signs Control Mind the Rules

More information

FCC Technician License Course

FCC Technician License Course FCC Technician License Course 2018-2022 FCC Element 2 Technician Class Question Pool Presented by: Tamiami Amateur Radio Club (TARC) WELCOME To the SECOND of 3, 4-hour classes presented by TARC to prepare

More information

Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit

Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit Contents p. v Preface p. ix Devices and Op-Amps p. 1 Introduction to Diodes p. 3 Introduction to Diodes p. 4 Inside the Diode p. 6 Three Diode Models p. 10 Computer Circuit Analysis p. 16 MultiSIM Lab

More information

Converting the Motorola 42 to 50 MHz MT1000 or P200 to 50 to 54 MHz

Converting the Motorola 42 to 50 MHz MT1000 or P200 to 50 to 54 MHz Converting the Motorola 42 to 50 MHz MT1000 or P200 to 50 to 54 MHz Hardware mods by WB8VLC. RSS mods by WA1MIK Transmitter and receiver mods to tune the entire band and direct RSS frequency entry. Revision

More information

APPLICATION NOTE. System Design for RF Immunity

APPLICATION NOTE. System Design for RF Immunity APPLICATION NOTE System Design for RF Immunity Audio Codec Application Note Rev1.0 Page 1 of 6 March 2008 With the growth of the portable electronic devices industry, radiated RF fields and potential interference

More information

Basic Electrical Training

Basic Electrical Training Basic Electrical Training Electricians Tools Explain how various hand tools are used by an electrician Discuss the safe use of hand tools and power tools Perform basic calculations and measurement conversions

More information

Electronics Repair 101

Electronics Repair 101 Electronics Repair 101 Mike Willegal VCF east 9.1 SCELBI CPU LAYOUT Safety Remove metal jewelry When around high voltage, don t create a potential circuit from the high voltage to ground that might pass

More information

Contents Introduction Overview about the programme Curriculum for Electrical Equipment Installer & Repairer (Assistant) NVQF Level2

Contents Introduction Overview about the programme Curriculum for Electrical Equipment Installer & Repairer (Assistant) NVQF Level2 1 2 Contents 1. Introduction 4 1.1 course objectives 4 1.2 Course competencies 4 1.3 Job opportunities 5 1.4 Trainee entry level 5 1.5 Trainer requirements 5 1.6 Teaching strategies in a competency-based

More information

M328 version ESR inductance capacitance meter multifunctional tester DIY

M328 version ESR inductance capacitance meter multifunctional tester DIY M328 version ESR inductance capacitance meter multifunctional tester DIY About transistor Multifunction Tester: The tester uses 3.7V rechargeable lithium battery (battery model: 14500) powered portable

More information

& Electricity. Electronics. Resources

& Electricity. Electronics. Resources & Electricity Electronics Resources Delmar s Standard Textbook of Electricity Sixth Edition Stephen Herman 9781285852706 Packed with high-quality photos and illustrations, Delmar s Standard Textbook of

More information

Electronic Components (Elements)

Electronic Components (Elements) Lecture_3 Electronic Components (Elements) Instructor: IBRAHIM ABU-ISBEIH 25 July 2011 Reverse Engineering 1 Objectives: After completing this class, you will be able to identify the most commonly used

More information

Base Station Installation and Maintenance

Base Station Installation and Maintenance Base Station Installation and Maintenance Leading the wireless revolution is not an easy task. Ensuring that your base stations are installed at an optimal level of efficiency and maintained according

More information

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

More information

LABORATORIES-ECE. Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory

LABORATORIES-ECE. Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory LABORATORIES-ECE Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual

More information

Curriculum for Electrical & Electronic Assembler (Assistant) (NVQF level 2)

Curriculum for Electrical & Electronic Assembler (Assistant) (NVQF level 2) National Vocational and Technical Training Commission (NAVTTC) Curriculum for Electrical & Electronic Assembler (Assistant) (NVQF level 2) TVET-GFA Contents 1. Introduction 3 1.1 Overall course objectives

More information

Unit/Standard Number. LEA Task # Alignment

Unit/Standard Number. LEA Task # Alignment 1 Secondary Competency Task List 100 SAFETY 101 Demonstrate an understanding of State and School safety regulations. 102 Practice safety techniques for electronics work. 103 Demonstrate an understanding

More information

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet

Perkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student

More information

BE Assignment. (1) Explain Active component and Passive component in Detail. (1) Explain practical voltage source and ideal voltage source.

BE Assignment. (1) Explain Active component and Passive component in Detail. (1) Explain practical voltage source and ideal voltage source. BE Assignment chapter-1 (1) Explain Active component and Passive component in Detail. (1) Explain practical voltage source and ideal voltage source. (2) Explain practical current source and ideal current

More information

Quantity available (A) Quantity required (R) Sl. No. Deficiency (R - A) Description of Equipment

Quantity available (A) Quantity required (R) Sl. No. Deficiency (R - A) Description of Equipment . 2. 3. 4. 5. 6. (R 203) Semester II EE62 Electric Circuits Laboratory Regulated Power Supply: 0 5 V D.C Function Generator ( MHz) Single Phase Energy Meter Oscilloscope (20 MHz). Digital Storage Oscilloscope

More information

Easy Transmitter. Support ETX_REV5_Manual V2.7 Revised

Easy Transmitter. Support   ETX_REV5_Manual V2.7 Revised Easy Transmitter Introduction The Easy Transmitter kit from qrpkits.com provides a basic, crystal controlled transmitter with VXO tuning to provide a small tuning range around the crystal frequency. It

More information

Calhoon MEBA Engineering School. Study Guide for Proficiency Testing Industrial Electronics

Calhoon MEBA Engineering School. Study Guide for Proficiency Testing Industrial Electronics Calhoon MEBA Engineering School Study Guide for Proficiency Testing Industrial Electronics January 0. Which factors affect the end-to-end resistance of a metallic conductor?. A waveform shows three complete

More information

Electronics Technology

Electronics Technology Job Ready Assessment Blueprint Electronics Technology Test Code: 4035 / Version: 01 Copyright 2010. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information

More information

COURSE SCHEDULE SECTION. A (Room No: TP 301) B (Room No: TP 302) Hours Timings Hours Timings. Name of the staff Sec Office Office Hours Mail ID

COURSE SCHEDULE SECTION. A (Room No: TP 301) B (Room No: TP 302) Hours Timings Hours Timings. Name of the staff Sec Office Office Hours Mail ID SRM UNIVERSITY FACULTY OF ENGINEERING AND TECHNOLOGY SCHOOL OF ELECTRONICS AND COMMUNICATION ENGINEERING DEPARTMENT OF ECE COURSE PLAN Course Code : IT0201 Course Title : Electron Devices and Circuits

More information

RESOURCE REQUIREMENT

RESOURCE REQUIREMENT RESOURCE REQUIREMENT 9.1 PHYSICAL RESOURCES 9.1.1 Space requirement Norms and standards laid down by All India Council for Technical Education (AICTE) are to be followed to work out space requirement in

More information

Brought to you by Jestine Yong. Feel free to pass this short report to a friend or colleague

Brought to you by Jestine Yong.  Feel free to pass this short report to a friend or colleague Brought to you by Jestine Yong http://www.powersupplyrepairguide.com Feel free to pass this short report to a friend or colleague How to Easily Understand The Functions Of Switch Mode Power Supply Troubleshooting

More information

LABORATORIES-ECE. Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab

LABORATORIES-ECE. Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab LABORATORIES-ECE Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual attention

More information

3D EDUCATORS. Page # 1

3D EDUCATORS. Page # 1 3D EDUCATORS Invest in People the Only Asset that Appreciates CERTIFIED ELECTRICIAN Training Program LIVE ONLINE INSTRUCTOR LED ONE TO ONE FACILITY AVAILABLE BUILDING NATIONS A Professional Development

More information

Electronic Components

Electronic Components Engineering Project (1) Lecture_2 Electronic Components (Elements) Instructor: Eng. IBRAHIM ABU-ISBEIH 6 March 2012 Eng. Ibrahim Abu-Isbeih 1 Objectives: After completing this class, you will be able to

More information

Theory. Week. Lecture Day. TOPICS Week TOPICS. Intoduction Overview of DC Circuits. 1.use of measuring instruments-multimeter,cro etc.

Theory. Week. Lecture Day. TOPICS Week TOPICS. Intoduction Overview of DC Circuits. 1.use of measuring instruments-multimeter,cro etc. Name of faculty: Sanjay Puri Discipline: Applied Science (Electronics and Communication Engg.) Subject: Fundamentals of Electrical and Electronics Engg. Lesson Plan Duration: 36 weeks (From August 2018

More information

NUMBER OF TIMES COURSE MAY BE TAKEN FOR CREDIT: One

NUMBER OF TIMES COURSE MAY BE TAKEN FOR CREDIT: One I. COURSE INFORMATION: A. Division: Technical Department: Electricity/Electronics Course ID: ELECTR 220B Course Title: FCC Rules and Regulations Units: 3 Lecture: 3 hours Laboratory: None Prerequisite:

More information

1. In the circuit shown in the figure above, what will happen when switches S 1

1. In the circuit shown in the figure above, what will happen when switches S 1 Student ID: 22133336 Exam: 002001RR - Introduction to Electronics When you have completed your exam and reviewed your answers, click Submit Exam. Answers will not be recorded until you hit Submit Exam.

More information

M.D. Singh J.G. Joshi MECHATRONICS

M.D. Singh J.G. Joshi MECHATRONICS M.D. Singh J.G. Joshi MECHATRONICS MECHATRONICS MECHATRONICS M.D. SINGH Formerly Principal Sagar Institute of Technology and Research Bhopal J.G. JOSHI Lecturer Department of Electronics and Telecommunication

More information

SYLLABUS FOR TRADE PRACTICAL AND TRADE THEORY SEMESTER-I

SYLLABUS FOR TRADE PRACTICAL AND TRADE THEORY SEMESTER-I SYLLABUS FOR TRADE PRACTICAL AND TRADE THEORY SEMESTER-I 1 Week No Trade practical Trade and Orientation Visit to the institute and workshops. Introduction with the principal and other staffs. Care and

More information

Revised April Unit/Standard Number. Proficiency Level Achieved: (X) Indicates Competency Achieved to Industry Proficiency Level

Revised April Unit/Standard Number. Proficiency Level Achieved: (X) Indicates Competency Achieved to Industry Proficiency Level Unit/Standard Number Electrical, Electronic and Communications Engineering Technology/Technician CIP 15.0303 Task Grid Secondary Competency Task List 100 SAFETY 101 Demonstrate an understanding of state,

More information

Radiation Hardened RF Transceiver For In-Containment Environment Applications Using Commercial Off the Shelf Components

Radiation Hardened RF Transceiver For In-Containment Environment Applications Using Commercial Off the Shelf Components Radiation Hardened RF Transceiver For In-Containment Environment Applications Using Commercial Off the Shelf Components Shawn C. Stafford, Jorge V. Carvajal, Jonathan E. Baisch Westinghouse Electric Company

More information

Field Effect Transistors

Field Effect Transistors Field Effect Transistors Purpose In this experiment we introduce field effect transistors (FETs). We will measure the output characteristics of a FET, and then construct a common-source amplifier stage,

More information

UPSC Electrical Engineering Syllabus

UPSC Electrical Engineering Syllabus UPSC Electrical Engineering Syllabus UPSC Electrical Engineering Syllabus PAPER I 1. Circuit Theory: Circuit components; network graphs; KCL, KVL; circuit analysis methods: nodal analysis, mesh analysis;

More information

MAINTAINING OPTIMAL ALARM MONITORING COMMUNICATION

MAINTAINING OPTIMAL ALARM MONITORING COMMUNICATION MAINTAINING OPTIMAL ALARM MONITORING COMMUNICATION 2. MULTIUSER RF, DSSS AND PUBLIC NETWORKS Optimal communication from outstations to the control room is crucial to provide a reliable monitoring service.

More information

PA FAN PLATE ASSEMBLY 188D6127G1 SYMBOL PART NO. DESCRIPTION. 4 SBS /10 Spring nut. 5 19A702339P510 Screw, thread forming, flat head.

PA FAN PLATE ASSEMBLY 188D6127G1 SYMBOL PART NO. DESCRIPTION. 4 SBS /10 Spring nut. 5 19A702339P510 Screw, thread forming, flat head. MAINTENANCE MANUAL 851-870 MHz, 110 WATT POWER AMPLIFIER 19D902797G5 TABLE OF CONTENTS Page DESCRIPTION.............................................. Front Page SPECIFICATIONS.................................................

More information

ECET 211 Electric Machines & Controls Lecture 9-1 Adjustable-Speed Drives and PLC Installations (1 of 2)

ECET 211 Electric Machines & Controls Lecture 9-1 Adjustable-Speed Drives and PLC Installations (1 of 2) ECET 211 Electric Machines & Controls Lecture 9-1 Adjustable-Speed Drives (1 of 2) Text Book: Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Paul I-Hai Lin,

More information

Applications Overview

Applications Overview Applications Overview Galvanic Cycling of Rechargeable Batteries I-V Characterization of Solar Cells and Panels Making Low Resistance Measurements Using High Current DC I-V Characterization of Transistors

More information

ANNEXURE - I (A) SYLLABUS FOR PRELIMINARY WRITTEN TEST TECHNICAL PAPER (OBJECTIVE TYPE) (200 QUESTIONS)

ANNEXURE - I (A) SYLLABUS FOR PRELIMINARY WRITTEN TEST TECHNICAL PAPER (OBJECTIVE TYPE) (200 QUESTIONS) ANNEXURE - I (A) SYLLABUS FOR PRELIMINARY WRITTEN TEST TECHNICAL PAPER (OBJECTIVE TYPE) (200 QUESTIONS) For Post Code No. 31 1. Materials and Components: Structure of properties of Electronic Engineering,

More information

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018

Revised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018 Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Electrical, Electronic and Communications Engineering Technology/Technician CIP 15.0303 Task Grid Secondary Competency Task List 100

More information

ANALOG COMMUNICATION

ANALOG COMMUNICATION ANALOG COMMUNICATION TRAINING LAB Analog Communication Training Lab consists of six kits, one each for Modulation (ACL-01), Demodulation (ACL-02), Modulation (ACL-03), Demodulation (ACL-04), Noise power

More information

CATALOG. ANALOG COMMUNICATION SYSTEMS DIGITAL COMMUNICATION SYSTEMS Microcontroller kits Arm controller kits PLC Trainer KITS Regulated Power supplies

CATALOG. ANALOG COMMUNICATION SYSTEMS DIGITAL COMMUNICATION SYSTEMS Microcontroller kits Arm controller kits PLC Trainer KITS Regulated Power supplies CATALOG ANALOG COMMUNICATION SYSTEMS DIGITAL COMMUNICATION SYSTEMS Microcontroller kits Arm controller kits PLC Trainer KITS Regulated Power supplies UNION INTRUMENTS #17 & 18, 4 th floor, Hanumathra Arcade

More information

Administrative-Master Syllabus form approved June/2006 revised Page 1 of 1

Administrative-Master Syllabus form approved June/2006 revised Page 1 of 1 revised 11-02-06 Page 1 of 1 Administrative - Master Syllabus I. Topical Outline Each offering of this course must include the following topics (be sure to include information regarding lab, practicum,

More information

Electromechanical Technology /Electromechanical Engineering Technology CIP Task Grid

Electromechanical Technology /Electromechanical Engineering Technology CIP Task Grid 1 Secondary Task List 100 DEMONSTRATE KNOWLEDGE OF TECHNICAL REPORTS 101 Identify components of technical reports. 102 Demonstrate knowledge of the common components of technical documents. 103 Maintain

More information