2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

Size: px

Start display at page:

Download "2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)"

Henry Garrett
6 years ago
Views:

1 mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low profile design with the mounting height of.mm () chieves the multi-harness by the full automatic ID machine in combination with the DF series ID type. (DF series represents the mm pitch single-row product.) (1) Low profile design with mounting height.mm. () Provide the contact crimping area with the sufficient space, and secures the stable crimping operation. (1) The board can be connected horizontally or vertically in combination with the straight header with the right angle header. () For horizontal connection, the board to board size is the low profile of.mm. () Compatibility with the in-line plug allows the receptacle to set the board side to the receptacle and the cable side to the plug in the board to cable connection. (1) The board pre-fixed kink is treated with the post pin. () The style employs a scoop-proof and sturborn box type. () The type corresponding to SMT is avilable, using the heat-proof resin. This SMT header is equipped with the metal tab to prevent peeling in the solder joint area. In-line Plug (1) The crimping in-line plug consits of two types, one type, which has pursued after space merits, and the other employs the panel lock type, which can be fixed to the panel. () The in-line adapter is available to insert and in-line the ID socket from both sides.. UL, CS Certified. Glow Wire Compliance (Compliant with IEC 09--) pplications usiness equipment such as copy machine and printer

2 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Product Specifications Rating Current rating Note 1 Crimping Wire size IDC Wire size Voltage rating Crimping 0V C IDC to WG : WG : WG : 1, WG :1 0V C Operating Temperature Range Operating Humidity Range Storage Temperature Range Storage Humidity Range -ç to +ç (Note ) 0% to 0% (Note ) -ç to +0ç (Note ) 0% to 0% (Note ) Rating UL-CS Safety Standard and pproved specification Rated Current Rated Voltage WG : Wire size WG : (Note ) WG : 1 0V C UL CS Safety Standard File No. UL : E CS : LR99 Item Specification Condition 1. Insulation Resistance 00Mø min. 00V DC. Withstanding voltage No flashover or insulation breakdown. 0V C, 1 minute. Contact Resistance 0mø max 0m. Single Insertor/Extraction Force 0.N(0gf)min,.N(0gf)max. Measure by the square steel pin with 0.±0.00mm. Vibration No electrical discontinuity of 1μs or more Frequency : to Hz, single amplitude of 0. mm, hours in each of the directions.. Humidity (Steady state) Contact resistance : 0mø max. Insulation resistance : 00Mø min. 9 hours at temperature of 0ç and humidity of 90% to 9%. Temperature Cycle Contact resistance : 0mø max. Insulation resistance :00Mø min. (-ç : 0 minutes to ç: minutes ç: 0 minutes to ç: minutes) cycles. Durability (Mating/un-mating) Contact resistance : 0mø max. Tin plating : 0 cycles Gold plating: 0 cycles THT type Flow : 0ç for seconds Manual soldering : 00ç for seconds 9. Resistance to Soldering Heat No deformation of components affecting performance. SMT type Reflow : t the recommended temperature profile Manual soldering : 00ç for seconds Note 1 : Current rating of header is. Note : Includes temperature rise caused by current flow. pply to crimping contact type. Maximum operating temperature for IDC and receptacle type is ç. Note : Please use under conditions with no condensation occurred. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note : pply to crimping contact type. The IDC type's rated current is 1. Materials / Finish Product Part Material Finish Remarks Crimping Socket Insulator Polyamide lack UL9V-0 IDC Contact for Socket Contact Phosphor bronze Tin plated or gold plated ID Socket Insulator Polyamide lack UL9V-0 Contact Phosphor bronze Tin plated or gold plated Receptacle Insulator Polyamide lack UL9V-0 Contact Phosphor bronze Tin plated or gold plated Pin Header Insulator Polyamide lack UL9V-0 Contact rass Tin plated or gold plated Insulator Polyamide eige UL9V-0 SMT Pin Header Contact rass Tin plated or gold plated Metal tab rass Tin plated In-line Plug Insulator Polyamide lack UL9V-0 In-line IDC Contact Contact Phosphor bronze Tin plated or gold plated In-line dapter Insulator Polyamide lack UL9V-0 Contact rass Tin plated

3 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Connector DF - * q w S - C e r t Contact pplication pattern q Series Name : DF,,, E t Connection Form/Contact Style w Number of : ~1 C : Crimp socket e Connector Type S : Socket R : ID socket for WG R : ID socket for WG P : Pin Header DS : Straight through hole EP : In-line Plug DS : Right angle through hole r Contact Pitch : mm V : Straight SMT H : Right angle SMT : dapter DF - EPPCF q w e r q Contact Type e Contact Type/Packaging Type lank : For socket SCF : Socket contact, Reel EP : For in-line plug SC : Socket contact, Pack w pplicable Wire Size PCF : Plug contact, Reel : WG PC : Plug contact, Pack : to WG r Plating Type lank : Tin plated : Gold plated (Plug contact) C : Gold plated (Socket contact) DF- S-R##(**) DF()- P-DS(**) DFE- P-H(**) DF- S-R##(**) DFE- P-V(**) DF()- P-DS(**) DF- S-C DF()- P-DS(**) DFE-πP-H(**) Panel DF- EP-C DF()- P-DS(**) DFE-πP-V(**) DF- S-C DF- S-DS(**) DF()- P-DS(**) DFE-πP-H(**) Panel DF- EP-C DFE-πP-V(**) DF()- P-DS(**) 9

Note 1 : Mark to determine the socket name Mark : R, Mark : R WG WG DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- 9S-R(**) DF-S-R(**) DF-S-R(**) DF-S-R(**)

4 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) ID Socket [Specific No.] (* *), * * (01) : Gold plated, 0pcs/pack (0) : Tin plated, 0pcs/pack This picture shows the cable assembled status. Note 1 : Mark to determine the socket name Mark : R, Mark : R WG WG DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- 9S-R(**) DF-S-R(**) DF-S-R(**) DF-S-R(**) DF-1S-R(**) DF-S-R(**) -00- ** ** ** ** -00- ** -00- ** ** -00- ** -00- ** -00- ** ** ** ** DF-1S-R(**) ** 1 DF-1S-R(**) -0- ** 1 Note : The quantity for delivery of the specific No. (01) and (0) is determined per bag (0pcs.). If needed, please order the productsper bag. pplicable Cable RoHS DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- S-R(**) DF- 9S-R(**) DF-S-R(**) DF-S-R(**) DF-S-R(**) DF-1S-R(**) DF-S-R(**) ** ** ** ** ** ** ** ** -00- ** -01- ** -0-0 ** -0- ** -0- ** RoHS pplicable Cable Jacket Diameter DF-*S-R(**) UL1 WG (/0.1) Ø0.9 to 1mm DF-*S-R(**) UL1 WG (/0.) Ø0.9 to 1mm pplicable ID Connection Tool Type Connection Type Remarks DF DF Desktop ID Machine S01/DF DF No restriction Desktop machine for small lot

DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Crimping Socket [Specific No.] (* *), * * lank : 0pcs/pack This picture shows the Contact crimped status.

number indicated. Note : The quantity for delivery of the specification No. "None" is determined per bag (0 pcs.). If needed, please order the products per bag.

] (* *), * * () : Tin plated, Tube packaging () : Gold plated, Tube packaging RoHS 0 1 Note1 : The product's contact number indicated +0.1 oard Through-hole Diameter : Ø0.

5 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Crimping Socket [Specific No.] (* *), * * lank : 0pcs/pack This picture shows the Contact crimped status. DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) DF-S-C(**) Receptacle ** ** ** ** ** ** ** RoHS Note1 : The product's contact number indicated. Note : The quantity for delivery of the specification No. "None" is determined per bag (0 pcs.). If needed, please order the products per bag DF-19S-C(**) -00- ** DF-S-C(**) -00- ** DF-S-C(**) ** DF-S-C(**) ** DF-1S-C(**) -00- ** DF-S-C(**) ** DF-1S-C(**) ** [Specific No.] (* *), * * () : Tin plated, Tube packaging () : Gold plated, Tube packaging RoHS 0 1 Note1 : The product's contact number indicated +0.1 oard Through-hole Diameter : Ø0. +0 Unit: mm Tube Package Quantity RoHS Tube Package Quantity RoHS DF-S-DS(**) -00- ** pieces DF- 9S-DS(**) ** 09 1 pieces DF-S-DS(**) ** DF-S-DS(**) -00- ** 1 DF-S-DS(**) ** 0 DF-S-DS(**) -00- ** DF-S-DS(**) ** 0 0 DF-S-DS(**) ** DF-S-DS(**) -00- ** DF-1S-DS(**) ** 1 1 DF-S-DS(**) -00- ** 1 0 DF-S-DS(**) ** 0 1 DF-S-DS(**) ** DF-1S-DS(**) ** 1 1 Note : Please order the tube packaging at the multiplied tube packaging quantity (pieces).

DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Straight Pin Header +0.1 oard Through-hole Diameter: Ø0. +0 +0.0 Kink Pre-fixed Effective Diameter: Ø0.

-001-0 01 DF- P-DS -010-0 DF- P-DS(01) -00-01 DF- P-DS -011- DF- P-DS(01) -00-01 DF- 9P-DS -01- DF- 9P-DS(01) -00-01 DF-P-DS -01- DF-P-DS(01) -00-0 01 DF-P-DS -01-0 DF-P-DS(01) -00-01 DF-P-DS -01-

Right ngle Pin Header oard Through-hole Diameter: Ø0.+0 +0.1 +0.0 Kink Pre-fixed Effective Diameter: Ø0.

DF- P-DS -0-1 DF- P-DS(01) -00-01 DF- P-DS -0- DF- P-DS(01) -00-01 DF- P-DS -0- DF- P-DS(01) -00-0 01 DF- 9P-DS -0-0 DF- 9P-DS(01) -00-01 DF-P-DS -0- DF-P-DS(01) -009-01 DF-P-DS -0- DF-P-DS(01)

6 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Straight Pin Header +0.1 oard Through-hole Diameter: Ø Kink Pre-fixed Effective Diameter: Ø0. +0 Tin Plating Gold Plating DF- P-DS DF- P-DS(01) DF- P-DS -01- DF- P-DS(01) DF- P-DS -01- DF- P-DS(01) DF- P-DS -0- DF- P-DS(01) DF- P-DS DF- P-DS(01) DF- P-DS DF- P-DS(01) DF- P-DS DF- P-DS(01) DF- 9P-DS -01- DF- 9P-DS(01) DF-P-DS -01- DF-P-DS(01) DF-P-DS DF-P-DS(01) DF-P-DS -01- DF-P-DS(01) DF-1P-DS -01- DF-1P-DS(01) DF-P-DS DF-P-DS(01) DF-1P-DS DF-1P-DS(01) Note : The quantity for delivery is determined per bag (0 pcs.). If needed, please order the products per bag. Right ngle Pin Header oard Through-hole Diameter: Ø Kink Pre-fixed Effective Diameter: Ø RoHS Tin Plating Gold Plating DF- P-DS DF- P-DS(01) DF- P-DS -00- DF -P-DS(01) DF- P-DS -01- DF- P-DS(01) DF- P-DS -0-9 DF- P-DS(01) DF- P-DS -0-1 DF- P-DS(01) DF- P-DS -0- DF- P-DS(01) DF- P-DS -0- DF- P-DS(01) DF- 9P-DS -0-0 DF- 9P-DS(01) DF-P-DS -0- DF-P-DS(01) DF-P-DS -0- DF-P-DS(01) DF-P-DS -09- DF-P-DS(01) DF-1P-DS DF-1P-DS(01) DF-P-DS DF-P-DS(01) DF-1P-DS DF-1P-DS(01) Note : The quantity for delivery is determined per bag(0pcs.). If needed, please order the products per bag RoHS

7 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Straight Pin Header (SMT) 1. P=... Number of PC mounting pattern C Note : If a pattern is included in the shaded area and is not treated with resist, it could touch the connector contact. DFE-P-V(**) DFE-P-V(**) DFE-P-V(**) DFE-P-V(**) DFE-P-V(**) DFE-P-V(**) DFE-P-V(**) DFE-9P-V(**) DFE-P-V(**) DFE-P-V(**) DFE-P-V(**) DFE-1P-V(**) DFE-P-V(**) DFE-1P-V(**).9 HRS marking (0.) [Specific No.] (* *), * * (1) : Tin plated packaging (1) : Gold plated packaging C RoHS Note1 : Please order the emboss packaging product by the reel number. (1 reel : 00pcs.) Cavity No Configuration of to position Cavity No. HRS marking 1

8 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Right ngle Pin Header (SMT) P=.. 1 Number of 1. PC mounting pattern DFE-P-H(**) DFE-P-H(**) DFE-P-H(**) DFE-P-H(**) DFE-P-H(**) DFE-P-H(**) DFE-P-H(**) DFE-9P-H(**) DFE-P-H(**) DFE-P-H(**) DFE-P-H(**) DFE-1P-H(**) DFE-P-H(**) DFE-1P-H(**) ** ** ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** -0-0 ** ** ** ** -0-0 ** Note1 : Please order the emboss packaging product by the reel number. (1reel : 00pcs.) (0.) HRS marking Cavity No [Specific No.] (* *), * * (1) : Tin plated embossed packaging (1) : Gold plated embossded packaging C RoHS Configuration of to position Cavity No. HRS marking

DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) In-line Plug Photo: Contact inserted status RoHS RoHS DF- EP-C -00-0 0 DF- 9EP-C -001-09 1 DF- EP-C

"None" item is delivered per bag (0pcs.). Please order products per bag unit.

9.. 1. 1. 1. 19...... 1. Note1 : pplicable panel thickness is 1. to 1.0mm. (However, a slight backlash is considered for the thickness other than 1. and 1.mm.) Note : Use the non-radius surface at DF- EP-C -01-1 1.

9 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) In-line Plug Photo: Contact inserted status RoHS RoHS DF- EP-C DF- 9EP-C DF- EP-C DF-EP-C DF- EP-C DF-EP-C -00- DF- EP-C DF-EP-C -00- DF- EP-C -00- DF-1EP-C DF- EP-C DF-EP-C DF- EP-C DF-1EP-C Note : The specific No."None" item is delivered per bag (0pcs.). Please order products per bag unit. In-line Plug with Panel Lock Photo: Contact insertion status Panel Cutouts C D E RoHS DF- EP-C DF- EP-C DF- EP-C DF- EP-C DF- EP-C DF- EP-C Note1 : pplicable panel thickness is 1. to 1.0mm. (However, a slight backlash is considered for the thickness other than 1. and 1.mm.) Note : Use the non-radius surface at DF- EP-C the hooking panel edge. DF- 9EP-C Note : Contact No. indicates 1,,, DF-EP-C DF-EP-C DF-EP-C DF-1EP-C DF-EP-C DF-1EP-C , and 1. Note : The specific No. "None" item is delivered per bag (0pcs.). Please order products per bag unit. 1

DF-EP- DF-EP- DF-1EP- DF-EP- DF-1EP- -0-0 -0- -09- -00- -01- -0-0 -0- -0- -0- -0-0 -0- -0- -09-9

10 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) In-line dapter with Panel Lock Panel Cutouts dapter to in-line by pushing pcs. of socket from both sides No.1-No.1 connection circuit type DF- EP- DF- EP- DF- EP- DF- EP- DF- EP- DF- EP- DF- EP- DF- 9EP- DF-EP- DF-EP- DF-EP- DF-1EP- DF-EP- DF-1EP C D E RoHS Note : The specific No. "None" item is delivered per bag (0pcs.). Please order products per bag unit. Note1 : pplicable panel thickness is 1. to 1.0mm.(However,backlash will occur except for 1., 1.mm thickness.) Note : Please use the non-radius surface at the hooking panel edge. 1

11 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Crimping Contact for Socket DF-SCF DF-SC DF-SCFC DF-SCC DF-SCF DF-SC DF-SCFC DF-SCC Crimping Contact for In-line Plug ULstyle Jacket Diameter to to pplicable Cable Wire Size WG WG WG WG WG WG WG WG WG WG WG WG WG WG WG WG Stranded Wire Conductor 1/0.1 1/0.1 1/0.1 1/0.1 /0.1 /0.1 /0. /0.1 /0.1 /0. /0.1 /0.1 /0. /0.1 /0.1 /0. Packaging,000/reel 0/pack,000/reel 0/pack,000/reel 0/pack,000/reel 0/pack Finish Tin plated Gold plated Tin plated Gold plated Note1 : Crimping contact Extraction Tool DF-C-PO() Note : pplicable wire with tin plated solid soft conductor. Note : When using other than the recommended wire, contact your nearest Hirose representative. DF-EPPCF DF-EPPC DF-EPPCF DF-EPPC -00- pplicable Cable ULstyle Jacket Diameter Wire Size Stranded Wire Conductor WG / WG /0.1 1 WG / WG WG WG /0.1 /0.1 / WG / WG /0.1 1 WG / WG WG WG /0.1 /0.1 /0. Packaging,000/reel 0/pack,000/reel 0/pack Finish Tin plated Gold plated Note1 : Crimping contact Extraction Tool DF-C-PO() Note : pplicable wire with tin plated solid soft conductor. Note : When using other than the recommended wire, contact your nearest Hirose representative. RoHS RoHS pplicable Crimping Tool pplicator Press Unit Type Hand Crimping Tool Extraction Tool P-DF-S P-DF-S P-DF-EPP CM-C DF-THC DFEP-THC DF-THC DF-C-PO () pplicable Contact DF-SCF/SCFC DF-SCF/SCFC DF-EPPCF/PCF DF-SC/SCC DF-EPPC/PC DF-SC/SCFC DF-****SC(F)(C) DF-EP****PC(F)() Note1 : If any trouble has occurred due to tools other than designated tool, Hirose bears no respoisibility for any trouble. Note : Please follow the "Crimping quality standards" and "Table of crimping condition" when crimping contacts. 1

DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Crimped contacts with cable assemblies Product Number Structure Refer to the chart below when determining

12 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Crimped contacts with cable assemblies Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. 1 DF-SF DF-SCF DF-SFC DF-SCFC DF-PF DF-EPPCF DF-PF DF-EPPCF Wire Type 0 UL0 DF-SF pplicable wire size WG Crimped condition / Terminal treatment oth-end crimped Single-end crimped / Without terminal treatment S Single-end crimped / With terminal treatment Terminal treatment : Stripped jacket Packaging Finish DF-SF DF-SFC DF-PF DF-PF Under development Under development Under development 0pcs/pack 0pcs/pack 0pcs/pack 0pcs/pack Tin plated Gold plated Tin plated Gold plated Note1 : ag packaging (0pcs/pack). Order by number of packs. Note : Please contact our sales representative when using the other specifications. Wire color 9 White 0 lack Wire length 00 00mm

13 DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Embossed Carrier Tape Dimensions Straight Pin Header R Product Type Size C D DFE-*P-V(**) Right ngle Pin Header ±0.1 Ø E E C 0.1 ±0.1 ±0.1 E 1.±0.1 C±0.1 ±0.1 ± to to to to 1 E E E-E ± Carrier hole +0.1 (Ø1. 0 ) far side Carrier hole +0.1 (Ø1. 0 ) far side Ø1±0. 0 (D+) MX.... Ø0± Ø0 ( 0 ) D Unreeling direction E R ±0.1.1±0. 1.±0. D + 0 (D+)MX Product Type Size C D to.0.. DFE-*P-H(**) to.0... to to

14 Powered by TCPDF ( DF Series mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) Precautions 1. Recommended Temperature Profile (SMT) 0 0 secmx MX 0 TEMPERTURE TIME (sec) 90 0sec 0secMX PRE-HETING TIME SOLDERING TIME [pplicable Conditions] 1.Peak temperature : a maximum of 0ç for no more than seconds.heating unit : no less than 0ç for no more than 0 seconds.preheating unit : 10 to 0ç for 90 to 0 seconds.number of times : no more than times * Measurement is conducted at the contact lead part s it may change depending on the conditions such as solder paste types, manufacturers, PC size, and other soldering materials, please fully check the mounting conditions before use. (Note 1) This temperature profile is a recommended value.. Recommended Manual Soldering Condition (SMT) Soldering iron temperature : 90±ç, Soldering time: Within seconds. Recommended Screen Thickness (SMT) 0.1 to 0.mm. oard Warpage (SMT) ased on both connector edges, 0.0mm max. in the connector center portion Flow Condition with utomatic Soldering Tool. Soldering temperature : 0±ç, Soldering time : Within seconds. Recommended Soldering Condition (DIP) Manual Soldering Condition. Soldering iron temperature : 90±ç, Soldering time : Within seconds. Cleaning Condition Refer to the "Wire-to-oard Connector Use Hand book". IP cleaning is allowed. (Cleaning is not recommended because cleaning may change the push/pull feeling etc. Please contact us when you use other cleaning agents. ). Connection Condition Refer to the "Wire-to-oard Connector Use Hand book".. Precations Refer to the "Wire-to-oard Connector Use Hand book". 0

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)

2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile