2.5mm Pitch Connector for Discrete Wire Connection
|
|
- Eustace Barrett
- 5 years ago
- Views:
Transcription
1 .mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by Protector (ID Type) The connector is structured to protect the insulation displacement connection area by the protector. Therefore, the connector has a strong tensile strength against the cable and prevents dusts.. Easy Connection by Easy Tool (ID Type) No expensive insulation displacement machine is needed. The connection can be established only by mating the cable into the protector and fastening it with the ID tool.. Intermediate Connection Possible (ID Type) For intermediate connection, the connector allows signal extraction during cabling. [Intermediate Connection] Applications FA equipment, measurement equipment B
2 DF1 Series.mm Pitch Connector for Discrete Wire Connection Product Specifications Rating Current rating (Note1) Cable Size AWG : A AWG : A AWG : 1A Operating Temperature Range Operating Moisture Range Storage Temperature Range -0 to +ç (Note) -0 to 0% - to +0ç (Note) Voltage rating 0V AC Storage Moisture Range -0 to 0% (Note) Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Item Specification Condition 1. Insulation Resistance 00M ohms Min 00V DC. Withstanding voltage No flashover or insulation breakdown. 0V AC/1 minute. Contact Resistance 0m ohms Max 0mA. Insertor/Extraction Force MIN0.N (gf), MAX.N(0gf) Measure by the square steel pin with 0.±0.00mm. Vibration No electrical discontinuity of 1μs or more Frequency: to Hz, single amplitude of mm, hours in each of the directions.. Moisture Resistance Contact resistance: 0m ohms Max Insulation resistance: 00M ohms Min hours at temperature of 0ç and humidity of 0% to %. Temperature Cycle Contact resistance: 0m ohms max.insulation resistance: 00M ohms min. (-ç: 0 minutes ~ç: minutes (-ç: 0 minutes ~ç: minutes) cycles. Durability (Mating/un-mating) Contact resistance: 0m ohms max. Tin plating: 0 cycles. Resistance to Soldering heat No deformation of components affecting performance. Flow: 0ç for seconds Manual soldering: 00ç for seconds Note 1. The rated current will be changed according to cable sizes for use. For the header only, the rating is A. Note : Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note : Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Product Part Material Finish Remarks Crimping Socket Insulator Polyamide Light Brown ULV-0 Crimping Contact Contact Phosphor copper Tin plated ID Socket Insulator Polyamide Light Brown ULV-0 Contact Phosphor copper Tin plated Insulator Polyamide Light Brown ULV-0 Pin Header Contact Phosphor copper Tin plated Note:Hirose's tin-plated products takes measures against whisker. Ordering Information Connector DF1 Protector - * S -. C q w e r t DF1 - * A 1.0 Contact DF1 q w e - SCF q w q Series Name : DF1 w Number of Contact : to, e Connector Type S: Socket P: Pin Header r Contact Pitch :.mm q Number of Contact : to, w Connector Type A: Discrete wire q Applicable Cable Size : AWG to t Contact Type C : Crimping socket R : AWG ID socket R : AWG ID socket R : AWG ID socket DSA : Straight through hole DS : Right angle through hole e Cable Clamp Size w Packaging Type 1.0: UL0 AWG, 1.: UL0 AWG SCF : Socket contact, reel packaging / Tin plated SC : Socket contact, bag packaging / Tin plated B1
3 DF1 Series.mm Pitch Connector for Discrete Wire Connection ID Socket (Open End Type) Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Applicable Cable Applicable Cable Jacket Diameter DF1-*S-.R(0) UL0 AWG( pieces/0.mm) 1. to 1.mm DF1-*S-.R(0) UL0 AWG( pieces/0.mm) 1. to 1.mm DF1-*S-.R(0) UL0 AWG( pieces/0.1mm) 1. to 1.mm (Tin plated annealing copper wire) AWG Cable Socket Size (Triangle Mark: Green) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) Number of Contacts A B RoHS. 1.. DF1-S-.R(0) DF1-S-.R(0) DF1-1S-.R(0) DF1-1S-.R(0) DF1-1S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) AWG Cable Socket Size (Triangle Mark: Light Blue) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) Note:This convex portion is located ( contacts: the center at one point)( to contacts: as shown in the illustration)(more than contacts: one center at one point added to the above illustration). Number of Contacts A B RoHS. 1.. DF1-S-.R(0) DF1-S-.R(0) DF1-1S-.R(0) DF1-1S-.R(0) DF1-1S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) Number of Contacts A B RoHS Number of Contacts A B RoHS AWG Cable Socket Size (Triangle Mark: Red) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) Number of Contacts A B RoHS. 1.. DF1-S-.R(0) DF1-S-.R(0) DF1-1S-.R(0) DF1-1S-.R(0) DF1-1S-.R(0) DF1-S-.R(0) DF1-S-.R(0) DF1-S-.R(0) Note:A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the products per bag. Number of Contacts A B RoHS B1
4 DF1 Series.mm Pitch Connector for Discrete Wire Connection Protector Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Select the protector after inspecting the cable jacket diameter for use. Protector Type Applicable Jacket Diameter Recommended Cable DF1-*A1. Ø1. to Ø1. UL0 AWG DF1-*A1.0 Ø to Ø1. UL0 AWG *indicates contact No. Note 1.Product contact No. mark, however and contacts are not indicated. Note.Round hole to distinguish the protector A1.0 and 1. (DF1-*A1.0 only) AWG Cable Protector Size AWG, Cable Protector Size Number of Contacts A B C RoHS Number of Contacts A B C RoHS DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1- A1. DF1- A DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A1.0 DF1- A DF1- A DF1- A DF1-A DF1-A DF1-A1. DF1-1A1. DF1-1A1. DF1-1A1. DF1-A1. DF1-A1. DF1-A DF1-A1.0 DF1-1A1.0 DF1-1A1.0 DF1-1A1.0 DF1-A1.0 DF1-A1.0 DF1-A Note:A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag. B1
5 DF1 Series.mm Pitch Connector for Discrete Wire Connection Crimping Socket Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Photo: Contact Inserted. Crimping Contact for Socket Note1:This convex portion is located ( contacts: the center at one point)( to contacts: as shown in the illustration)(more than contacts: one center at one point added to the above illustration). Note.The terminal number indicates all contact numbers. Number of Contacts A B RoHS Number of Contacts A B RoHS DF1- S-.C DF1-S-.C DF1- S-.C DF1-1S-.C DF1- S-.C DF1-1S-.C DF1- S-.C DF1-1S-.C DF1- S-.C DF1-S-.C DF1- S-.C DF1-S-.C DF1- S-.C DF1-1S-.C DF1- S-.C DF1-S-.C DF1-S-.C Note:A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag ;;; ;;; Ø Packaging Type Number of Contacts Finish RoHS DF1-SCF Reel 000 Tin plating DF1-SC Bag 0 Applicable Cable (Tin Plated Annealing Copper Wire) Conductor Size (wire construction) Jacket Diameter AWG ( cores/0.mm) AWG ( cores/0.mm) Ø0. to Ø1.mm AWG (0 cores/1.mm) Note:If other cables are used instead of the applicable cable, contact Hirose sales department. Recommended Cable UL1, UL0 Strip Length 1. to.mm BApplicable Crimping Tool Type Applicable Contact Applicator AP-DF1-S 01-- DF1-SCF Press Main Unit CM Manual Crimping Tool DF1-TS 0-0- DF1-SC Extraction Tool Flat-bladed screwdriver, mm max, blade width. Note 1: If a trouble has occurred due to tools which are not designated by Hirose, Hirose won't guarantee any product. Note : Refer to tecknical specification for work method of extraction tool. B10
6 DF1 Series.mm Pitch Connector for Discrete Wire Connection Pin Header Right Angle Type Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved Board Through-hole Diameter : ø+0 DF1- P-.DS(0) DF1- P-.DS(0) DF1- P-.DS(0) DF1- P-.DS(0) DF1- P-.DS(0) DF1- P-.DS(0) DF1- P-.DS(0) DF1- P-.DS(0) Number of Contacts A B C RoHS DF1-P-.DS(0) DF1-1P-.DS(0) DF1-1P-.DS(0) DF1-1P-.DS(0) DF1-P-.DS(0) DF1-P-.DS(0) DF1-1P-.DS(0) DF1-P-.DS(0) DF1-P-.DS(0) Note 1.A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag. Note.The socket applicable to the 1 contact connector is only crimping type. Pin Header Straight Type Number of Contacts A B C RoHS Board Through-hole Diameter : ø+0 Number of Contacts A B C RoHS DF1- P-.DSA(0) DF1- P-.DSA(0) DF1- P-.DSA(0) DF1- P-.DSA(0) DF1- P-.DSA(0) DF1- P-.DSA(0) DF1- P-.DSA(0) DF1- P-.DSA(0) DF1-P-.DSA(0) DF1-1P-.DSA(0) DF1-1P-.DSA(0) DF1-1P-.DSA(0) DF1-P-.DSA(0) DF1-P-.DSA(0) DF1-1P-.DSA(0) DF1-P-.DSA(0) DF1-P-.DSA(0) Note 1.A packaging quantity is delivered by the bag unit (0 pcs.). If needed, please order the product per bag. Note.The socket applicable to the 1 contacts connector is only crimping type. Number of Contacts A B C RoHS B
7 Powered by TCPDF ( DF1 Series.mm Pitch Connector for Discrete Wire Connection BDF1 Connection Press Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Height Width Depth Weight DF1 Connection Press HP mm 0mm 0mm.kg Note:The intermediate connection can be established by removing the cable cuttingblade of this press machine. Note:Select a protector after inspecting a cable Jacket diameter for use. Protector Type Applicable Jacket Diameter Recommended Cable DF1-*A1. Ø1. to Ø1. UL0 AWG DF1-*A1.0 Ø to Ø1. UL0 AWG, * indicates contact No. BDF1 Cable Crimper DF1 Cable Crimper Used to install the cable in the protector. BPrecautions DF1 Connection Press HP1 DF1 Cable Crimper 1. Recommended Soldering Condition Flow: 0ç for seconds Manual soldering: 00ç for seconds. Cleaning Condition Refer to Nylon Connector Use Hand book.. Connection Condition [Crimping] Refer to Nylon Connector Use Hand book. [ID] For the insulation displacement tool, set a set of connector per insulation displacement. If more than connectors have been set, they interrupt each other, which will cause an insulation displacement failure. After the insulation displacement, make sure that the locks on both protector sides are completely activated.. Precation Slight variations in color of the plastic compounds do not affect form, fit or function of the connector.. Precation Refer to Nylon Connector Use Hand book. B1
2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More information5mm Pitch Miniature Potting Connectors for Secondary Power Supply
5mm Pitch Miniature Potting Connectors for Secondary Power Supply DF5 Series Single row type Features 1. Potting Product This connector is capable of potting 9mm maximum, and 22.5mm mounting height is
More information2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Oct.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. New Insulation Displacement
More information2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard)
2.5mm Pitch Connector for Discrete Wire Connection (Product Compliant with UL/CSA Standard) DF1B Series Features 1. New Insulation Displacement and Crimping Ideas This connector is a new type to insert
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features Correspond to Board Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header In-line
More information1.25mm Pitch Miniature Crimping Connector (UL Listed)
1.25mm Pitch Miniature Crimping Connector (UL Listed) DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight
More information2.5mm Pitch Connectors for Full Lock and Discrete Wire Connection
.5mm Pitch Connectors for Full Lock and Discrete Wire Connection DF1E Series UL, C-UL Listed Full lock function added Inner-lock system full lock mechanism Features 1. Full Lock Function dded The inner
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CSA Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard) DF Series Features 1. Correspond to Board Design in Wide Variation Crimp Socket Receptacle Pin Header (1) Low profile
More information2mm Pitch Connector for Discrete Wire Connection(Product approved by UL CSA Standard)
mm Pitch Connector for Discrete Wire Connection(Product approved by UL CS Standard) DF Series Features 1. Correspond to oard Design in Wide Variation ID Socket Crimp Socket Receptacle Pin Header (1) Low
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information2.54mm Pitch Bottom Entry Type Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.54mm Pitch Board to Board Connector
2.54mm Pitch Board to Board Connector HIF3H Series Features 1. Product Variation Afford to connect the board to board horizontally or vertically. 2. Compatibility Achieve combination with other HIF3H series.
More information15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply
15A 3.96mm pitch Wire-to-Board Connectors for Internal Power Supply DF63 Series (UL, C-UL, TÜV, Listed) Features 1. Rated for up to 15A DF63 has the capacity to handle a max of 15A when using 16 AWG wire.
More information1.27mm Pitch Connector
1.27mm Pitch Connector FX1 Series DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Features 1. High density and space saved-din Duplex Mount Achieved The alignment
More information1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies
NEW 1.7 mm pitch, Low Profile Board to Wire Connectors for Power Supplies DF65 Series (UL Pending) Lock structure and operation Socket Header Latch Latches are deflected slightly during mating. Features
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
Features 1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies DF65 Series 1. Enhanced contact reliability and lock structure The unique locking structure reinforces the engagement between
More information2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2 mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series Compact shape due to 2 x 2.2 grid layout of pins *Both are 7 contacts with 3A current rating 16 16 Existing products DF62 Fig.1 Features
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More informationModular Plug Connectors Compliant to Enhanced Category 5 Standards
Modular Plug Connectors Compliant to Enhanced Category 5 Standards TM2P Series (Shielded Type) TM22P-88P (Non-shielded Type) Features. Supports High-Speed LAN Transmission Conforms to requirements of TIA/EIA-568B
More information1.7mm pitch, Low Profile Wire-to-Board Connectors for Power Supplies
1.7mm pitch, Low Profile Wire-to-oard onnectors for Power Supplies DF Series (UL, -UL, Listed) Lock structure and operation Socket Latch Header Latches are deflected slightly during mating. Features 1.
More information0.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable
.5mm Pitch Vertical Mating Connectors for Thin Wire Coaxial Cable DF8 Series Superb mating operability Features 1. Supports high speed connections The single row alignment utilizes a.5mm pitch to support
More informationSmall-sized, plastic type, push-pull lock connectors
Small-sized, plastic type, push-pull lock connectors RP17 Series Product Specifications Ratings Rated current Rated voltage Features 1. Superior mating operability Secure mating and easy unmating is achieved
More informationCAT 6 Data Wiring System Connectors
CAT Data Wiring System Connectors TM23 Series Features 1. High-Speed Data Transfer Conforms to the TIA/EIA-58B.2-1 data Wiring standard, thereby clears CAT transfer performance requirements. As such, these
More informationDC to 2.5GHz Small Coaxial Switch
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationModular Plug Connectors compliant to Cat.6 A Standard
Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of
More informationHigh Power/Signal Connectors for Industrial Machinery
High Power/Signal Connectors for Industrial Machinery PQ Series Variations PQ50W Non water-resistant 20 position type Non water-resistant 48 position type Water-resistant 50 pos. type Contact (9A/pin)
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Oct..07 Copyright 07 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More informationPush-on Bayonet Lock Miniature Waterproof Connectors
Push-on ayonet Lock Miniature Waterproof Connectors HR34 Series Push-on ayonet Lock Mating : Just inserting plug unit will complete mating Dec.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. ll Rights
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions (Example : LF07) 8.9 mm max. ( pos.). Sep..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Ease of shielded
More informationCAT 6 Data Wiring System Connectors
NEW CAT 6 Data Wiring System Connectors TM2 Series Features. High-Speed Data Transfer Conforms to the TIA/EIA-568B.2- data Wiring standard, thereby clears CAT 6 transfer performance requirements. As such,
More informationHigh Speed, Matched-Impedance, Parallel Board-to-board Connector System
NEW High Speed, Matched-Impedance, Parallel Board-to-board Connector System IT Series (2 required) IT Series Outline High-speed matched-impedance parallel board-to-board connector designed for applications
More informationSBS Connectors - up to 110 amps
Connectors - up to 1 amps NEW 75G 75X Wire to Wire The patented connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact with live circuits.
More informationAVX Wire-to-Board Connectors
AVX Wire-to-Board Connectors www.avx.com Version 11.11 Table of Contents INSULATION DISPLACEMENT CONNECTORS (IDC) WIRE TO BOARD (WTB) DISCRETE WIRE IDC SERIES 9175...................................................................................
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9175 series of surface mountable Insulation Displacement Connectors (IDC)
More informationM20 Connectors Specification
Specification mm pitch, with 0.64mm square male pin connection system. mm (.100") PITCH oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Male: Finish: Electrical
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height U.F Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) U.FP(V)HF. (MAX.) U.FPHF U.FP88HF. (MAX.) U.FPHF U.FPHF U.FP8HF
More informationSpring Loaded Contacts
Spring Loaded Contacts Contents ATE Spring Probes Specifications One Part Probes Two Part Probes Spring Loaded Contacts Specifications Spring Loaded Contact Connectors Single Spring Loaded Contacts SMT
More informationSBS Connectors - up to 110 amps
SBS Connectors - up to 11 amps SBS 75G SBS 75X Wire to Wire The patented SBS connector family is designed to provide high power in a compact ergonomic housing with protection against accidental contact
More information2.4mm coaxial connectors for frequency test measurements
2.4mm coaxial connectors for frequency test measurements 2.4mm Series Functional diagram Straight plug H2.4-P-SS085 Plug side Attenuator PlugJack H2.4-AT (**)-PJ ** 0, 3, 6, 10, 20dB Features 1. Complies
More information10+Gbps 0.8mm pitch Board to Board Connectors
NEW 1+Gbps.mm pitch oard to oard onnectors FX1 Series.mm Pitch Variations :oplanar / Vertical / Stacking Number of ontacts : / / / 1 / 1/ 1 Multi functional contact (MF contact) as; q ground contact to
More informationMiniature Waterproof Shielded Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 0XX. Wire Gauge Size. Code Accepted Wire Cap Code Wire Gauge Insulation Pages 6-7
The 917X series of surface mount Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from
More informationMiniature Waterproof Shielded Connectors
Miniature Waterproof Shielded Connectors LF Series Mated dimensions 8.9 mm max. ( pos.). Ø Receptacle Plug Short turn bayonet lock Features. Ease of shielded termination and connector assembly All components
More informationM22 Connectors Specification
Specification 2mm pitch, with 0.5mm square male pin connection system. oard-to-oard and Cable-to-oard application options. Materials Mouldings: Contacts Female: Jumper socket: Male: Finish: Electrical
More informationsealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
More information75 Ω Small Coaxial Connectors (SMT Low Profile)
NEW 75 Ω Small Coaxial Connectors (SMT Low Profile) H.FL75 Series 75 ø, up to 3 GHz Figure Connector mating external view 6.5 Mar..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features.
More informationStandard AWG: WTB
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Up to 6GHz Mated height comparison (with E.FL series) 1.9 (MAX 2.) U.FL-LP(V)-4HF 2.3 (MAX 2.4) U.FL-LP-62HF
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More information0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm High-Speed Board-to-Board Connections
0.5mm Pitch Connectors with Ground Plate for 2mm to 3mm HighSpeed BoardtoBoard Connections FX11 Series Stacking height : 2mm Stacking height : 2.5mm, 3mm Features 1. Low Profile Design The boardtoboard
More information.093 [2.36] Commercial Pin and Socket Connectors
.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height U.FL Series Features 1. Nominal mated height of 1.9 or 2.3mm, 2.4mm (Max. 2. or 2.4mm, 2.5mm)(Fig.1) 2. Small mounting
More informationUltra Small Surface Mount Coaxial Connectors - 1.9mm or 2.3mm, 2.4mm Mated Height
Ultra Small Surface Mount Coaxial Connectors.9mm or.mm,.mm Mated Height Series Up to GHz Mated height comparison (with E.F series).9 (MAX.) P(V) P(V)HF. (MAX.) P PHF P88 P88HF. (MAX.) P PHF P PHF P8HF
More informationI-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable
PRODUCT SPECIFICATION I-PEX MHF Micro Coaxial Connector Applicable Cable for O.D. 1.37mm Cable P/N 20351-112R-37 P/N 20279-001E-01 RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw
More informationAMPLIMITE Cable Connectors and Shielding Hardware Kits
AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering
More informationCouplers with Connectors (H Type)
Couplers with Connectors (H Type) Nov. Copyright HIROSE ELECTRIC CO., LTD. All Rights Reserved. HDH Series HDH-83GHD HDH-3GH(4) HDH-93GHD(4) Product Specifications Ratings Frequency range (Note) Characteristic
More information45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Features 1. High current capacity Capable of going to a max. of 45A when using AWG
More informationDiscrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationSSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationPoke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
More informationConnector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE
MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact
More informationPlug-plug relay adapter. Mating interface shape. Jack -jack type BNC(75)-A-JJ(40) Jack-Jack relay adapter. Mating interface shape
NC 75Ω connector NC75 Series Dec..8 Copyright 8 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Functional diagram Plug side Straight plug Representative product : NC(75)-P-.5CV Cap CW-A/U(44) Short plug
More informationPowerpole Connectors - PP120: up to 240 Amps
Powerpole Connectors - : up to 240 Amps series Powerpole housings are designed to accommodate up to 1/0 ( mm²) wires and handle high currents up to 240 amps. Reducing bushings allow to accept down to #8
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. D 3.00 to 7.92mm (.118 to.312") Pitch FEATURES AND SPECIFICATIONS Features
More informationUltra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.4mm Mated Height
Ultra Small SMT Coaxial Connectors - Low Profile 1.9mm or 2.mm Mated Height U.FL Series Meets up to 6 GHz Requirement Mated Height Comparison (With Hirose Product) 1.9(2.0Max) U.FL-LP(V)-00 2.(2.5Max)
More information45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply
45Amp,10.16 mm pitch, Board to Wire Connector for Internal Power Supply DF60 Series (UL, C-UL, TÜV certified product) Figure 1 Features 1. High current capacity Capable of going to a max. of 45A when using
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationMaximum mated height 1.2mm, Micro Coaxial Connector K.FL2 Series
Connector mated condition Mated height comparison (compared to conventional company products) Fig.1 Features 1. A low mated height of 1.2mm max. When connected, K.FL2 delivers a world class low mated height
More informationOperating Temperature: -40ºC to +125ºC 6XX. Wire Gauge Size
AVX developed the initial SMT discrete wire IDC connector 5 years ago for 26-28AWG AVX wires. Since then, we have seen this Wire-to-Board (WTB) contact technology spread to multiple wire gauges and multiple
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
1.0 SCOPE 1 of 8 E This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of the latest
More informationPRODUCT SPECIFICATION
Section Table of Contents Page 1.0 Scope 2 2.0 Product Description 2 2.1 Names Series Number(s) 2 Table 1 Wire-To-Wire 2 Table 2 Wire-To-Board 2 2.2 Dimensions, Materials, Platings, Markings 2 2.3 Safety
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cable-to-board and cable-to-cable applications with protection up to IP 65 / IP 67. At the same time, applications up to
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationCOMPONENT SPECIFICATION M20 SERIES CONNECTORS AUGUST 2016 CONTENTS: SECTION TITLE PAGE. 1 Description of Connector and Intended Application 2
AUGUST 2016 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Gauges 5 APPENDICES NOTES: 1. Third angle projection
More informationYL CONNECTOR. 1Certified LR R Specifications. Standards. 4.5mm pitch/disconnectable Crimp style Wire-to-wire connectors
.mm pitch/disconnectable Crimp style Wire-to-wire connectors Panel lock Inner lock lance Specifications Current rating: 0A AC, DC max. (A when retainers are mounted) Voltage rating: 00V AC, DC max. Temperature
More informationWIRE-PRESS SOCKETS (AXW)
FOR PC BORD TO WIRE XW WIRE-PRESS SOCKETS (XW) FETURES 1. Pressure welding method for superior wiring and no need to strip wires. pplicable wires: WG #22, #24, #26, #28. 2. Two pressure weldings assure
More informationI-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX
PRODUCT SPECIFICATION I-PEX MHF3 Micro Coaxial Connector Mating Heigh: 1.5mm MAX P/N 20367-001R P/N 20369-001E RF Connector, RF Cable & Antenna Manufacturer E-mail: sales@wellshow.com.tw Tel: +886-2-24239376
More information2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical
FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is
More informationQualification Test Report SlimSeal SSL Connector
Qualification Test Report SlimSeal SSL Connector 501-134042 6/26/15 Rev A 1. INTRODUCTION 1.1 Purpose Testing was performed on the TE Connectivity SlimSeal SSL Connector to determine its conformance to
More informationPRODUCT SPECIFICATION
2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector
More informationCoaxial Line Stretchers
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Secure locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board
More informationPowerpole Connectors - PP75: up to 120 Amps
Powerpole Connectors - PP75: up to 120 Amps PP75 with Mounting Wings PP75 series Powerpole housings can be used for wire-to-wire, wire-to-board, and wire-to-busbar applications. Wire sizes from #16 AWG
More informationSPECIFICATION 宏致電子股份有限公司. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: FAX:
SPECIFICATION 宏致電子股份有限公司 Š ã 13 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: E PRODUCT NAME:
More information10. Mini Coax Connectors
. Connectors The allows multi-pole coaxial data transmission for board-to-board, cableto-board and cable-to-cable applications with protection up to IP65 / IP67. At the same time, applications up to 2.5
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationCF Series AXC5/AXC6. FEATURES 1. Vertical mating type with a 0.8 mm mated height low profile design
For board-to-micro coaxial wire Micro coaxial connectors (Low profile) AC5/AC6 CF Series 2. with strong resistance to various environments provides high contact reliability and facilitates connection work
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded
Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete
More informationPoke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL
AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,
More informationPluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header
Pluggable PCB terminals and headers Pluggable connection describes the method used to connect an external conductor to a PCB, via a terminal connector and header System features plug in system is simple
More informationOUTLINE FEATURES SPECIFICATIONS MATERIAL/FINISH
OUTLINE IP Push-On CM1 series with -D has black trivalent chromium treatment and is a connector which is in compliance with RoHS directive. D type is a small sized waterproof circular connector with push
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Insulator Color 9 = UL White 8 = UL Black Special Order Ø Ø Ø
The market and applications for simple and reliable discrete Wire-to-Board connectors continue to evolve. AVX first introduced the 9176 series of surface mountable Displacement Connectors (IDC) in 2007.
More information.100" RECEPTACLE STRIPS SINGLE AND DUAL ROW.100" [2.54] CENTERLINE RS SERIES
Introduction: dam Tech RS Series " pitch Receptacle Strips are a series of sockets offered in a multitude of sizes and profiles designed to satisfy most " pitch socket requirements. vailable in Single,
More informationModular Jack Connector for High-Speed Transmission
All non-rohs products NEW have been discontinued, will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connects.com, contact your Hirose sales representative.
More informationHandling Precaution for Terminal and Connector
1 Handling Precaution for Terminal and Connector Handling Precaution for Terminal and Connector This manual is to describe basic precautions for use of terminal and connector in the following. Make use
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 114-16016 17 APR 14 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Unless
More information